GPS synchronization from a TDD LTE BTS can provide frequency and phase synchronization for an FDD SRAN. A GPS antenna and receiver module connects to the TDD BTS and provides a PPS signal over cable to the BTS system module. The same PPS signal can then be sent over an HDMI cable from the sync output of the TDD BTS system module to the sync input of the FDD SRAN system module. Sync settings in both the TDD BTS and FDD SRAN need to be configured for the SRAN to act as a slave and be phase synchronized to the GPS signal from the TDD BTS.
Original Description:
Original Title
MOP (Airscale & FSMF) of SYNC FD SRAN From TDD .docx
GPS synchronization from a TDD LTE BTS can provide frequency and phase synchronization for an FDD SRAN. A GPS antenna and receiver module connects to the TDD BTS and provides a PPS signal over cable to the BTS system module. The same PPS signal can then be sent over an HDMI cable from the sync output of the TDD BTS system module to the sync input of the FDD SRAN system module. Sync settings in both the TDD BTS and FDD SRAN need to be configured for the SRAN to act as a slave and be phase synchronized to the GPS signal from the TDD BTS.
GPS synchronization from a TDD LTE BTS can provide frequency and phase synchronization for an FDD SRAN. A GPS antenna and receiver module connects to the TDD BTS and provides a PPS signal over cable to the BTS system module. The same PPS signal can then be sent over an HDMI cable from the sync output of the TDD BTS system module to the sync input of the FDD SRAN system module. Sync settings in both the TDD BTS and FDD SRAN need to be configured for the SRAN to act as a slave and be phase synchronized to the GPS signal from the TDD BTS.
MOP for FDD SRAN SYNC from TDD LTE BTS (Airscale & FSMF)
GPS Synchronization from TDD LTE for FDD SRAN.
• Support both Frequency and phase synchronization
• GPS antenna with integrated receiver (FYGA) connected to MDR-26 Sync interface of the Flexi System Module • 12V DC power for the receiver is supplied through the combined power/data cable (FYHA up to 100 m, FYHB 30 m) • FYEA provides optional surge protection 20 KA 8/20 µs (GR 1089 or IEEE Std C62.41.2-2002) LTE80, BSW;
FYGA + mounting kit FYMA
↑ Power and control to the GPS receiver
FYHA or FYHB cable ↓ PPS signal to BTS System Module
FYEA GPS Surge Protector
Kit (optional)
System Module
GPS Synch from TDD LTE to SRAN
Work Assumption • Airscale BTS ASIA/ FSMF for FDD SRAN • Sync Out and Sync In HDMI cable for connection between TDD LTE SM on FDD SRAN SM.
Cable Connectivity
HDMI cable to be connected in Sync Out of TDD ASIA/ FSMF to Sync
IN of FDD SRAN ASIA/ FSMF.
Sync setting in Both TDD SM (AIRSCALE/FSMF) & SRAN (AIRSCALE /FSMF).
1. Change the SYNC mode to Phase SYNC in TDD BTS.
2. Change the parameter as per the setting in image. 3. Modification can be done by SCF or manually, testing done with manual setting. 4. Sync Input priority for GPS should be set to 1. 5. Sync input Type will be the 1PPS/TOD from Sync hub master… 6. Remove the parameter of older TOP Sync Configuration. 7. Set the value of total delay from SHM to 15. 8. Set the Synchronization master as Master. 9. Set the value of “maxbtstimeerror” for FDD_LTE to default value 1000 and for GNBCF (2G) to 1900.
SYNC SETTING ON SRAN
Output :-
1. Sync would be phase, role as Slave and would be Synchronized