Professional Documents
Culture Documents
1 FILTRO DE MANGAS F.L.SMIDTH Centraljetpulsefilter PDF
1 FILTRO DE MANGAS F.L.SMIDTH Centraljetpulsefilter PDF
the filter. This operating principle causes a constant Type CE 1 has a pyramid-shaped bottom-hop-
flow and pressure drop, and implies that the dust- per while Types CE 2 and CE 3 have trough-
removing frequency is adapted to the current dust- shaped hoppers. In all three types replacement of
load. This method minimises the risk of clogging in bags is effected from the top of the casing (the
the pipe system, and also increases the lifetime of clean air chamber).
the bags by cleaning only when necessary. The
preset level for jet pulse release is in most cases All types of industrial dust can be handled. Filters
l25mm WG but other levels may also be applied. for coal have special features to prevent explo-
sions and fires. The filter is designed to give
The filter module comprises 3, 4 or 5 rows, each trouble-free operation 24 hours a day and requires
with 7 cylindrical bags mounted on wire cages 3 m a minimum of maintenance.
in length and 120 mm in diameter. The filtration area
is thus 1.15 m2 per bag. Filter operati on costs are very often offset by the
value of the material recovered. Further more,
Dedusting capacity is 80—180 m /h per M filtration
3 2
effective dedusting averts shutdowns, while the
area according to dust type and operating condi- reduction in industrial pollution should be
tions. considered in each case.
FLS Jet Pulse Filter, Type CE 1 comprises 1, 2,4 or 6
The type designations are CE 1, CE 2, and CE 3
basic modules, Type CE 2, an even number of 8-20
(CEntral installation) followed by size specification
modules and Type CE 3 an even number of 22-36
digits indicating number of modules and number
modules. The three types have individual designs
of solenoid valves, respectively.
of air intake.
Type of dust Example Solution :
A Non-agglomerating dust 700 m3 min. air (25oC) containing coal dust FLS Jet Pulse Filter, Type CE 2,
(Fly ash, metal oxides) particles (dust type B), average size 50u (mic- Filtration area 400 m2
B Partially agglomerating rons), dust load 40 g/m3, to be dedusted. Size 10 - 25.
dust (Cement, coal, limestone)
C Heavily agglomerating dust
(Gypsum, ground sand).
Data in this brochure series is only intended for preliminary project planning. Manufacturer reserves the right to modify equipment details and/or specifications without notice.
DENMARK: F. L. Smidth & Co. A/S. Vigerslev Allé 77, DK-2500 Valby Copenhagen • UNITED KINGDOM: F. L. Smidth & Co., Ltd. 17, Lansdowne Road, Croydon, GB-CR9 2JT •
FRANCE: F. L. Smidth & Cie - France, 55, Rue Ampére, F-75017 Paris • FEDERAL REPUBLIC OF GERMANY: F. L. Smidth & Co. GmbH, D-2400 Lübeck, Geniner Strasse 133-135 •
ITALY: F. L. Smidth & C. Italiana, S.r.l., Via Lucilio, 25,1-00136 Rome • SPAIN: F. L. Smidth & Cia. Española, S.A., Calle de Jorge Juan, 46, Madrid 1 • CANADA: F. L. Smidth & Co. of
Canada, Limited, 666 Sherbrooke St. West. Suite 1501, Montreal, Quebec, H3A IE7 • U.S.A.: F. L. Smidth & Co., 300 Knickerbocker Road, Cresskill, New Jersey 07626 • MEXICO: F. L.
Smidth & Cia., S.A. de C.V., Ave, Campos Eliseos, 385, 5° piso, Torre B, Polanco. Mexico City 5, D.F. • BRAZIL: F. L. Smidth, S.A. Comercio e industria, Rua Nebraska, 459, Brooklin
Paulista - CEP-04560, Caixa Postal 3506, 01000 Sao Paulo - SP • JAPAN: F. L. Smidth & Co. (Japan) Ltd., Togeki Building 1-1, Tsukiji 4-chome, Kyobashi P.O. Box 78, Chuo-ku, Tokyo 104.