Professional Documents
Culture Documents
After installing a maintenance kit, you should reset the printer's "Maintenance Count".
Method 1
Some of the older firmware versions did not have the "New Maintenance Kit" option mentioned in the
above procedure. In this case you can either update the printer's firmware to ad this feature or manually
reset the maintenance count in the service menu as described below.
Enter the Service Menu -- Press the MENU button, and scroll through the list of menus until you see
"SERVICE". Press OK.
Before you can enter the Service Menu, you will see a blank line on the screen where you are supposed to
enter an access code:
You will now be allowed into the Service Menu. Scroll through the list of options until you see,
"Maintenance Count." Press OK.
Change the current maintenance count to "0" by pressing the number "0", and then pressing OK.