Professional Documents
Culture Documents
PSS/E Oscillation Issue PSLF Initialization Issue
PSS/E Oscillation Issue PSLF Initialization Issue
The time step from left to right are 1/3 cycles, 1/5 cycles, 1/10 cycles
Etrq
3.5
0.8
3
0.7
2.5 0.6
0.5
2
0.4
1.5
0.3
0.2
0.5
0.1
0 0
-20 0 20 40 60 80 100 120 -20 0 20 40 60 80 100 120
P-EL
2.5
PTI
GE
1.5
0.5
0
-20 0 20 40 60 80 100 120
For voltage ramp simulation, PSSE tripped Motor A; PSLF tripped part of electronic load.
PSSE can only handle 50% of Motor A or B
VOLT-115
VOLT-115 ----
---- VLT-LOAD 115
VLT-LOAD 115 1.1
1.2
PTI
PTI
1.1 1 GE
GE
1
0.9
0.9
0.8
0.8
0.7
0.7
0.6 0.6
0.5
0.5
0.4
0.4
0.3
0.2
-10 0 10 20 30 40 50 60 70 -10 0 10 20 30 40 50 60 70
100%Motor D, phase one and phase two
VOLT-LOAD F-AC-TH
---- ----
LOAD BUS VOLTAGE MAGNITUDE MOTOR D: KTHA NON-RESTARTABLE C
1.4 1
PTI PTI
0.98
GE GE
1.2
0.96
1 0.94
0.92
0.8
0.9
0.6
0.88
0.4 0.86
0.84
0.2
0.82
0 0.8
-20 0 20 40 60 80 100 120 -20 0 20 40 60 80 100 120
For voltage ramp simulation, PSSE has an oscillation problem. The “non-restartable
compressor motor fraction which not tripped by thermal protection” are not match
each other.
100%Motor D, phase one and phase two
VOLT-SUB FUV-M1
---- ----
LOW SIDE BUS VOLTAGE MAGNITUDE MOTOR D: FRACTION OF MOTORS NOT
1.3 1
PTI PTI
1.2 GE 0.99 GE
0.98
1.1
0.97
1
0.96
0.9 0.95
0.94
0.8
0.93
0.7
0.92
0.6
0.91
0.5 0.9
-20 0 20 40 60 80 100 120 -20 0 20 40 60 80 100 120
Voltage sags to 75% event, PSS/E model not work correctly; for the “non-restartable
compressor motor fraction which not tripped by thermal protection”, the PSSE and
PSLF are match each other.