Professional Documents
Culture Documents
ANALYSIS
PROJECT NAME: Calalang Residence
PROJECT LOCATION: J. Fajardo St. Sampaloc Manilla
Date Prepared: October 02,2019 JSA Number: 004
Valid until:
ACTIVITY / Grinding / Welding / Cutting works
SCOPE OF
WORK:
LIST OF MANPOWER
Full Name Position Full Name Position
Richard Rubion Helper
Meraldo Almadovar Helper
Rey Mojar Welder
Supervisor must ensure
that all work activities are
Lack of competency
carried out by competent
personnel
Conduct Toolbox
meeting, review the
Lack or poor communication Method statement and
Job safety analysis to all
personnel involved in the
work activities
Workers to ensure no
loose clothing is worn
Haste or shortcut which may get caught up
in rotating devices
Correct installation of
Electrocution. Grinder Wheel.
4.Welding Fire Hazard Before starting welding
Burns. make sure the area is
Electrocution/ Spatter burns clear of all types of
Damage cable combustible materials
Hot tabs end pieces of welding rods. Provide a fire blanket on
Sparking site
Damage cable Make sure fire
UV rays extinguishers are
available on site
Wear proper PPE for
welding ie., leather
jackets, Gloves, welding
goggles/welding mask,
Trained Fire Watch.
Gas Monitor correctly
JOB SAFETY
ANALYSIS
sited.
Certified Equipment and
to be sited as near as
possible to work site.
Proper earthling of
equipment.
Certified Welder.
Make sure spark
containment is used such
as a welding hood/fire
blanket.
Ensure that rod holder is
in good condition.
Ensure that forward and
return cables are in good
working condition.
Use proper cable
connector for extension.
If cables are crossing the
road then ensure proper
protection.
The welder & the welder
helpers must wear
welding goggles
WORK METHODOLOGY:
JOB SAFETY
ANALYSIS
1. SITE PREPARATION WORKS