Professional Documents
Culture Documents
2019 Product Summary Digital
2019 Product Summary Digital
SUPPORTS 17 ROOFTOP
INDEX PILLOW BLOCK SUPPORTS
Model 1.5
6
7
M8-UFS Base
RSS3
17
17
SUPPORT
SYSTEMS
Model 1.5 Spacer 7 CUSTOM HANGER SUPPORTS 18 MIRO Industries was founded over
Model 1.5 Pipe Guide 7 Model 6-H 19 35 years ago to provide solutions
Model 3-R-2 7 Model 8-H 19 to meet the needs of contractors,
Model 3-R-2 Pipe Guide 7 Model 10-H 19 consultants, engineers and architects
in designing supports for rooftop
Model 3-R-4 7 Model 16-H 19
equipment for both commercial and
Model 3-R-4 Pipe Guide 7 industrial applications. MIRO exists to
Model 3-R Spacer 7 CUSTOM DUCT SUPPORTS 20 find solutions to your specific needs.
Model 6-DS 20
A building’s roof is one of its most
ROLLER SUPPORTS 8 Model 8-DS 20
important elements, and its integrity
Model 10-DS 20
Model 3-RAH-8 9 must be maintained regardless of the
Model 3-RAH-12 9 equipment it supports. Whether used
Model 3-RAH Pipe Guide 9 SUPPORT SLOPE ADJUSTMENTS 21 during new construction or retrofit,
MIRO Rooftop Supports distribute
Model 4-RAH-10 9
Model 4-RAH-14 9 MECHANICAL SUPPORTS 22 loads over the maximum appropriate
surface area, avoiding unwanted roof
Model 4-RAH Pipe Guide 9 LD-Mechanical Support 22
penetration. We also select the right
Model 5-RAH-8 10 HD-Mechanical Support w/ Decking 23 materials to help mitigate other types
Model 5-RAH-12 10 HD-Mechanical Support - Rail Only 23 of potential damage.
Base Size
(Hanger Support)
Pipe I.D.
Width
H.O.R.
Base Size Width Leg Base H.O.R.
Pipe I.D. Roller Adjustable Height Max Length
(Duct Support) Type
H.O.R.
Base Size
(Duct Support)
Length
HD MECHANICAL SUPPORT
12 - BS - 8
Maximum
H.O.R.
PILLOW
BLOCK
BLOCK
PILLOW BLOCK SUPPORT
ROLLER SERIES
ROLLER SERIES
1.5 3-R-2 3-R-4
STRUT SERIES
STRUT SERIES
2" 4”
2”
MISC. SUPPORTS
PILLOW BLOCK ACCESSORIES | SEE PAGES 30-31 FOR MORE INFO.
CUSTOM HANGER
CUSTOM HANGER
CUSTOM DUCT
CUSTOM DUCT
1.5 Pipe Guide 3-R-2 Pipe Guide 3-R-4 Pipe Guide
1 1⁄2” 2” 2”
ADJUSTMENTS
ADJUSTMENTS
SLOPE
SLOPE
1.5 Spacer 3-R Spacer 3-R Spacer
MECHANICAL
MECHANICAL
SUPPORTS
SUPPORTS
PILLOW BLOCK
12” x 12” 12” x 12” 12” x 12”
Support Pad Support Pad Support Pad
SUPPORTS
SUREFOOT ACCESS
SUREFOOT ACCESS
1” x 36”, 2-Sided 1” x 36”, 2-Sided 1” x 36”, 2-Sided
Adhesive Tape Adhesive Tape Adhesive Tape
Our Pillow Block supports are an easy-to-install and low-cost solution to many of your basic rooftop support needs. The
WIND & SEISMIC
ACCESSORIES
* Max load based on limiting the roof membrane to a load of only 3 psi. Ultimate capacity of support is not listed.
** Dimensional shipping weight, not actual case weight
PILLOW BLOCK
ROLLER SUPPORTS ROLLER SUPPORT ACCESSORIES
SEE PAGES 30-31 FOR MORE INFO.
3-RAH-8
ROLLER
ROLLER
SERIES
SERIES
8"
MAX
STRUT SERIES
STRUT SERIES
3” Aluminum 7 1⁄2” x 10”
Pipe Guide Support Pad
7 1⁄2” 10"
MISC. SUPPORTS
MISC. SUPPORTS
3-RAH-12
12”
MAX
CUSTOM HANGER
CUSTOM HANGER
3” Aluminum 7 1⁄2” x 10”
Pipe Guide Support Pad
7 1⁄2” 10"
4-RAH-10
CUSTOM DUCT
CUSTOM DUCT
9 5⁄8”
MAX
ADJUSTMENTS
ADJUSTMENTS
4” Aluminum 9” x 15 1⁄4”
SLOPE
SLOPE
Pipe Guide Support Pad
9" 15 1⁄4”
4-RAH-14
MECHANICAL
MECHANICAL
SUPPORTS
SUPPORTS
ROLLER SERIES 13 5⁄8”
MAX
SUPPORTS
SUREFOOT ACCESS
SUREFOOT ACCESS
4” Aluminum 9” x 15 1⁄4”
Pipe Guide Support Pad
9" 15 1⁄4”
Designed specifically for use in expansion/contraction applications, the Roller Series Supports use a roller to allow for MODEL PIPE SIZE HEIGHT RANGE MAX LOAD CASE QTY. SHIPPING WEIGHT
longitudinal movement, while securely maintaining lateral alignment. These maintenance-free designs use self-lubricating
WIND & SEISMIC
ACCESSORIES
* Max load based on limiting the roof membrane to a load of only 3 psi. Ultimate capacity of support is not listed.
** Stainless steel bases available upon request.
*** Dimensional shipping weight. Not actual case weight.
PILLOW BLOCK
ROLLER SUPPORTS ROLLER SUPPORTS
5-RAH-8 5-RAH-12 6-RAH-8 6-RAH-12 10-RAH-8 10-RAH-18
ROLLER
ROLLER
SERIES
SERIES
12” 12” 18"
STRUT SERIES
STRUT SERIES
8” MAX MAX MAX
8” 8"
MAX MAX MAX
MISC. SUPPORTS
MISC. SUPPORTS
16" 16" 19" 19" 23"
9" 15 1⁄4" 9" 15 1⁄4” 18" 18" 23"
CUSTOM HANGER
CUSTOM HANGER
ROLLER SUPPORT ACCESSORIES | SEE PAGES 30-31 FOR MORE INFO. ROLLER SUPPORT ACCESSORIES | SEE PAGES 30-31 FOR MORE INFO.
CUSTOM DUCT
CUSTOM DUCT
ADJUSTMENTS
ADJUSTMENTS
5” Aluminum 5” Aluminum 6” Aluminum 6” Aluminum 10” Aluminum 10” Aluminum
Pipe Guide Pipe Guide Pipe Guide Pipe Guide Pipe Guide Pipe Guide
SLOPE
SLOPE
MECHANICAL
MECHANICAL
SUPPORTS
SUPPORTS
9” x 15 1⁄4” 9” x 15 1⁄4” 16” x 18” 16” x 18” 19” x 23” 19” x 23”
Support Pad Support Pad Support Pad Support Pad Support Pad Support Pad
SUREFOOT ACCESS
SUREFOOT ACCESS
MODEL PIPE SIZE HEIGHT RANGE MAX LOAD CASE QTY. SHIPPING WEIGHT MODEL PIPE SIZE HEIGHT RANGE MAX LOAD CASE QTY. SHIPPING WEIGHT
WIND & SEISMIC
ACCESSORIES
* Max load based on limiting the roof membrane to a load of only 3 psi. Ultimate capacity of support is not listed. * Max load based on limiting the roof membrane to a load of only 3 psi. Ultimate capacity of support is not listed.
** Stainless steel bases available upon request. ** Stainless steel bases available upon request.
*** Dimensional shipping weight. Not actual case weight. *** Dimensional shipping weight. Not actual case weight.
PILLOW BLOCK
STRUT SUPPORTS STRUT SUPPORT ACCESSORIES
SEE PAGES 30-31 FOR MORE INFO.
ROLLER SERIES
ROLLER SERIES
8-Base Strut-2
2 1⁄2"
STRUT SERIES
STRUT SERIES
7 1⁄2”
10" 7 1⁄2” x 10”
Support Pad
8-Base Strut-5
MISC. SUPPORTS
MISC. SUPPORTS
5 3⁄8"
CUSTOM HANGER
CUSTOM HANGER
7 1⁄2” x 10”
7 ⁄2”
1 Support Pad
10"
8-Base Strut-8
CUSTOM DUCT
CUSTOM DUCT
8 7⁄8”
ADJUSTMENTS
ADJUSTMENTS
7 1⁄2” x 10”
Support Pad
SLOPE
SLOPE
7 1⁄2” 10”
8-Base Strut-12
MECHANICAL
MECHANICAL
SUPPORTS
SUPPORTS
STRUT SERIES 12”
SUPPORTS
SUREFOOT ACCESS
SUREFOOT ACCESS
7 1⁄2” x 10”
Support Pad
7 1⁄2” 10”
Strut Series Supports are built to accommodate conduit, electrical or solar pipes, as well as all kinds of mechanical piping,
MODEL HEIGHT RANGE STRUT LENGTH MAX LOAD CASE QTY. SHIPPING WEIGHT
or a random mix of them all. These models can be set up in widths from a 8” single-base, up to a 48” four-base, or other
WIND & SEISMIC
ACCESSORIES
* Max load based on limiting the roof membrane to a load of only 3 psi. Ultimate capacity of support is not listed.
** Stainless steel bases available upon request.
*** Dimensional shipping weight. Not actual case weight.
PILLOW BLOCK
STRUT SUPPORTS STRUT SUPPORT ACCESSORIES
SEE PAGES 30-31 FOR MORE INFO. STRUT SUPPORTS
ROLLER SERIES
ROLLER SERIES
12-Base Strut-8
20-Base Strut-4 20-Base Strut-8 20-Base Strut-18
9 1⁄4”
STRUT SERIES
STRUT SERIES
9” x 15 1⁄4”
Support Pad
19”
9” 15 1⁄4”
9 1⁄2”
4 1⁄8”
12-Base Strut-12
MISC. SUPPORTS
MISC. SUPPORTS
19” 19” 19”
23” 23” 23”
13 ⁄4”
1
CUSTOM HANGER
CUSTOM HANGER
9” x 15 1⁄4”
Support Pad
9” 15 1⁄4”
CUSTOM DUCT
9 1⁄4”
ADJUSTMENTS
ADJUSTMENTS
16” x 18”
16” 18” Support Pad
SLOPE
SLOPE
16-Base Strut-12 19” x 23” 19” x 23” 19x23
MECHANICAL
MECHANICAL
SUPPORTS
SUPPORTS
Support Pad Support Pad Support Pad
13 1⁄4”
SUREFOOT ACCESS
SUREFOOT ACCESS
16” x 18”
Support Pad
16”
18”
ACTUAL PRODUCT
MODEL HEIGHT RANGE STRUT LENGTH MAX LOAD CASE QTY. SHIPPING WEIGHT MODEL HEIGHT RANGE STRUT LENGTH MAX LOAD CASE QTY.
WEIGHT
WIND & SEISMIC
16-BS-8 4 3⁄4” - 9 1⁄4” 16” 578 lbs.* 4 42 lbs.*** 20-BS-18 5 1⁄2” - 18” 20” 907 lbs.* 1 15 lbs./unit
ACCESSORIES
* Max load based on limiting the roof membrane to a load of only 3 psi. Ultimate capacity of support is not listed. * Max load based on limiting the roof membrane to a load of only 3 psi. Ultimate capacity of support is not listed.
** Stainless steel bases available upon request.
*** Dimensional shipping weight. Not actual case weight.
PILLOW BLOCK
STRUT SUPPORTS MISC. SUPPORTS
ROLLER SERIES
ROLLER SERIES
M8-UFS Base RSS3
24-Base Strut-5 36-Base Strut-5 48-Base Strut-5 The M8-UFS is a versatile base that can be used The RSS3 can support a variety of small electrical pipes,
for many different purposes. There is a saddle conduit, or more, and is manufactured using 100% recycled
housing that can accomodate 1 5⁄8” x 1 5⁄8” 12 ga. strut, PVC material.
as well as a 3⁄8”-16 coupler housing.
STRUT SERIES
STRUT SERIES
desired length as needed. The minimum recommended
length is 6”, to provide adequate stability.
24”
5” 36” 48”
5” 5”
MISC. SUPPORTS
3”
SUPPORTS
MISC.
7 1⁄2” 10” 7 1⁄2” 7 1⁄2”
10” 10”
CUSTOM HANGER
CUSTOM HANGER
8” 8”
STRUT SUPPORT ACCESSORIES | SEE PAGES 30-31 FOR MORE INFO. MISC. SUPPORT ACCESSORIES | SEE PAGES 30-31
FOR MORE INFO.
CUSTOM DUCT
CUSTOM DUCT
36”
3 1⁄2”
ADJUSTMENTS
ADJUSTMENTS
SLOPE
SLOPE
7 1⁄2” x 10” 7 1⁄2” x 10” 7 1⁄2” x 10” 12” x 12”
MECHANICAL
MECHANICAL
Support Pad Support Pad Support Pad Support Pad
SUPPORTS
SUPPORTS
SUREFOOT ACCESS
SUREFOOT ACCESS
ACTUAL PRODUCT ACTUAL PRODUCT
MODEL HEIGHT RANGE STRUT LENGTH MAX LOAD CASE QTY. MODEL HEIGHT LENGTH MAX LOAD CASE QTY.
WEIGHT WEIGHT
24-BS-5 4 1⁄8” - 6” 24” 115 lbs./ft.* 1 5 lbs/unit M8-UFS Base 3” N/A 93 lbs* 24 1 lb/unit
WIND & SEISMIC
ACCESSORIES
* Max load based on limiting the roof membrane to a load of only 3 psi. Ultimate capacity of support is not listed. * Max load based on limiting the roof membrane to a load of only 3 psi. Ultimate capacity of support is not listed.
PILLOW BLOCK
www.miroind.com/custom-quote,
or by scanning the QR Code:
ROLLER SERIES
ADJUSTABLE HANGER SUPPORT | 6-H, 8-H, 10-H & 16-H
Adjustable Hanger Supports are designed for single or multiple pipes, single
or multiple tiers and for various heights.
NAME HANGER TYPE
STRUT SERIES
To obtain pricing for the models 6-H, 8-H, 10-H and 16-H Supports, please
STRUT SERIES
C CLEVIS HANGER
fill out our Custom Quote Template and submit it to your local Sales
Representative. The templates, as well as a Sales Rep Locator are available BH BAND HANGER
on our website. RH ROLLER HANGER
T TRAPEZE
Information Needed for Pricing Quote:
RC ROLLER CHAIR
MISC. SUPPORTS
MISC. SUPPORTS
• Size of pipe
• Pipe contents -See naming convention on page 5 for more information
• Clearance height above roof
• Thickness of insulation around pipe (if any)
• Center line distance between adjacent pipes for multiple pipe supports
• Type of pipe
• Quantity of supports required (or total footage of pipe)
CUSTOM
CUSTOM
HANGER
HANGER
Adjustable Clevis Hanger Style Trapeze Hanger
CUSTOM DUCT
CUSTOM DUCT
ADJUSTMENTS
ADJUSTMENTS
SLOPE
SLOPE
MECHANICAL
MECHANICAL
SUPPORTS
SUPPORTS
CUSTOM
Chair Roller Support Roller Hanger Support
SUPPORTS
SUREFOOT ACCESS
SUREFOOT ACCESS
Many projects require the use of custom-designed and engineered components, hardware, bases, and layouts to properly
accommodate the varying types of equipment, conduits, ducting, cable trays and piping, as well as the roof topography
WIND & SEISMIC
The MIRO team of in-house engineers and project managers are dedicated to customized solutions. They are experts
in assessing your needs and requirements of a job, then finding the best, quickest and most cost-effective ways to meet
them. Our ability to design, engineer and execute intricate, custom projects has made MIRO the go-to leader in the
ACCESSORIES
ACCESSORIES
industry.
* See MIRO Specification for pipe support loading design constraints. Base and support pad size will be determined by job
specific requirements. Stainless steel or hot dipped galvanized bases available upon request.
PILLOW BLOCK
www.miroind.com/custom-quote,
or by scanning the QR Code:
ROLLER SERIES
MIRO Industries Custom Series Supports are not only adjustable in height, but can also be adjusted to accommodate
ADJUSTABLE DUCT SUPPORT | 6-DS, 8-DS & 10-DS different roof slope directions. On 8DS/8H supports and larger, the leg of the support can be rotated 90 degrees,
allowing the base to pivot in one of two different directions. This allows the supports to accommodate pipe or duct
DS Supports are designed for single or multiple tier duct, pipe, cable tray, that’s running perpendicular to the roof slope or parallel to it.
etc. They are also available in various heights.
The adjustment of the base can accommodate up to a 2:12 (9.46°) slope. Contact MIRO Industries for support options
To obtain pricing for the models 6-DS, 8-DS and 10-DS Supports, please
STRUT SERIES
STRUT SERIES
that will work with a steeper slope.
fill out our Custom Quote Template and submit it to your local Sales
Representative. The templates, as well as a Sales Rep Locator are available
on our website.
MISC. SUPPORTS
• Dimensions of duct
• Duct material (stainless or galvanized, single or double wall)
• Clearance height above roof
• Insulation (if any)
• Total footage of duct
• Does duct need to be enclosed?
CUSTOM HANGER
CUSTOM HANGER
Duct Support with Enclosed Duct Support
Adjustable Header
CUSTOM DUCT
CUSTOM
DUCT
ADJUSTMENTS
ADJUSTMENTS
SLOPE
SLOPE
OR
MECHANICAL
MECHANICAL
SUPPORTS
SUPPORTS
3rd Leg Duct Support Multi-Tier Duct Support
SUREFOOT ACCESS
SUREFOOT ACCESS
WIND & SEISMIC
ACCESSORIES
* See MIRO Specification for duct and cable tray support loading design constraints. Base and support pad size will be determined by job
specific requirements. Stainless steel or hot dipped galvanized bases available upon request.
PILLOW BLOCK
www.miroind.com/custom-quote,
or by scanning the QR Code:
ROLLER SERIES
LIGHT DUTY - MECHANICAL SUPPORT HEAVY DUTY - MECHANICAL SUPPORT
MIRO LD Mechanical Supports are a quick and easy solution to elevating small and light rooftop mechanical units. They The HD Mechanical Support is a larger alternative to the LD, providing increased adjustability, customization, and
are designed to support a unit 8” off the roof, with a weight capacity of up to 200 lbs. They are available in several weight capacity. To obtain pricing for the HD Mechanical Support, please fill out our Custom Quote Template and
different dimensions to accommodate varying size units. May ship partially disassembled. submit it to your local Sales Representative. The templates, as well as a Sales Rep Locator are available on our website.
STRUT SERIES
• Width and Length desired
30" 30" 36" 36" • Height off roof
• Weight of unit being supported
MISC. SUPPORTS
MISC. SUPPORTS
HD Mechanical Support w/ Decking
8" "
8
CUSTOM HANGER
CUSTOM HANGER
MECHANICAL SUPPORT ACCESSORIES | SEE PAGES 30-31 FOR MORE INFO.
CUSTOM DUCT
CUSTOM DUCT
ADJUSTMENTS
ADJUSTMENTS
SLOPE
SLOPE
7 1⁄2” x 10” 7 1⁄2” x 10”
Support Pad Support Pad HD Mechanical Support - Rail Only
MECHANICAL
MECHANICAL
SUPPORTS
SUPPORTS
SUREFOOT ACCESS
24x24 (not pictured) 8” 24” x 24” 200 lbs. * 7 1⁄2” x 10”
ACCESSORIES
* Max load based on limiting the roof membrane to a load of only 3 psi. Ultimate capacity of support is not listed. * Base and support pad size will be determined by job specific requirements. Bar grate or fiberglass available as platform
** MIRO can create custom pan sizes upon request. Contact MIRO for more information on custom LD Mechanical Supports. materials upon request. Stainless steel or hot dipped galvanized bases also available upon request.
PILLOW BLOCK
www.miroind.com/custom-quote,
or by scanning the QR Code:
SUREFOOT ACCESS
ROLLER SERIES
ROLLER SERIES
To obtain pricing for the Surefoot Access Bridge Crossover, Walkway, Service
Platform, or the Ramp Systems, fill out our Custom Quote Template and submit
to your local Sales Representative. The templates, as well as a Sales Rep Locator
are available on our website.
STRUT SERIES
• Desired span clearance
• Desired clearance height off roof
• Specify if railing is needed
MISC. SUPPORTS
Bridge Crossover
Products are available in full stainless steel
configurations upon request.
CUSTOM HANGER
CUSTOM HANGER
CUSTOM DUCT
CUSTOM DUCT
Ramp
ADJUSTMENTS
ADJUSTMENTS
SLOPE
SLOPE
Service Platform
MECHANICAL
MECHANICAL
SUPPORTS
SUPPORTS
SUREFOOT ACCESS
SUREFOOT
SUREFOOT
ACCESS
ACCESS
Built to offer safe and cost-effective access to facilities and equipment, Surefoot Access products are custom-designed to
meet your site and OSHA standards. They are shipped partially assembled and ready for easy on-site assembly.
• Surefoot Bridge Crossovers span across pipes, ducts, expansion joints, elevation changes and other potential
obstructions with engineered stair access.
WIND & SEISMIC
Molded polycarbonate bases effectively distribute loading to prevent point loading, damage to the roof surface or other
ACCESSORIES
ACCESSORIES
critical rooftop equipment. Slip-resistant bar grating or interlock planking are used on all walking surfaces, to ensure solid
footing and minimize snow and ice accumulation. In high wind or seismic zones, MIRO can engineer structural anchor
points to maintain code and safety compliance. To resist corrosion, all Surefoot Access products are made of 100%
galvanized materials.
PILLOW BLOCK
CROSSOVER KITS CROSSOVER KITS
ROLLER SERIES
ROLLER SERIES
Need a crossover that’s quick and easy? MIRO offers a selection of pre-built crossovers that are easy to order
and assemble on-site. Just find which one has the clearance you need, then choose a span of either 48” or 60”.
Larger sizes and additional customization are available by simply getting in contact with your local MIRO Sales
Representative (see page 35).
STRUT SERIES
36” 36”
36” 36”
MISC. SUPPORTS
MISC. SUPPORTS
CUSTOM HANGER
CUSTOM HANGER
22” 41”
50 1⁄2”
31 1⁄2”
116 1⁄2"
CUSTOM DUCT
CUSTOM DUCT
64”
64”
64”
ADJUSTMENTS
ADJUSTMENTS
SLOPE
SLOPE
CROSSOVER ASSEMBLY ACCESSORIES | SEE PAGE 30 FOR MORE INFO. CROSSOVER ASSEMBLY ACCESSORIES | SEE PAGE 30 FOR MORE INFO.
MECHANICAL
MECHANICAL
SUPPORTS
SUPPORTS
SUREFOOT
SUREFOOT
16” x 18” 16” x 18”
ACCESS
ACCESS
16” x 18” 16” x 18”
Support Pad Support Pad
Support Pad Support Pad
WIND & SEISMIC
2-CO-48 2 per side 22” 48” or 60” 9 1⁄2” 36” 116 1⁄2”* 64” 4-CO-48 4 per side 41” 48” or 60” 9 1⁄2” 36” 160 1⁄2”* 64”
3-CO-48 3 per side 31 1⁄2” 48” or 60” 9 1⁄2” 36” 140 1⁄2”* 64” 5-CO-48 5 per side 50 1⁄2” 48” or 60” 9 1⁄2” 36” 187 1⁄2”* 64”
ACCESSORIES
ACCESSORIES
* Overall length is based on a platform span of 48”. For the overall length of a 60” platform, add 12”. * Overall length is based on a platform span of 48”. For the overall length of a 60” platform, add 12”.
PILLOW BLOCK
WIND & SEISMIC SUPPORTS
Protect your rooftop MEP non-structural systems from earthquakes or other natural disasters by using code-compliant
ROLLER SERIES
ROLLER SERIES
wind and seismic products from MIRO (engineering design, calculation package and P.E. stamp provided by MIRO are
required).
STRUT SERIES
MISC. SUPPORTS
MISC. SUPPORTS
CUSTOM HANGER
CUSTOM HANGER
HD Mechanical Bridge Crossover
CUSTOM DUCT
CUSTOM DUCT
Unit
ADJUSTMENTS
ADJUSTMENTS
SLOPE
SLOPE
MECHANICAL
MECHANICAL
SUPPORTS
SUPPORTS
WIND & SEISMIC To obtain pricing for the Wind and Seismic supports, have the following information available:
SUREFOOT ACCESS
SUREFOOT ACCESS
• Pipe or duct layout
Addressing lateral and uplift loading on rooftop equipment can be a challenging task. Typically, a support that is positively
• Type of pipe or duct
attached to the building structure is required to meet code applicable minimum uplift and lateral loading. Additionally,
• Size of pipe or duct
a project-specific design and documentation prepared by a registered design professional are required to ensure code
• Insulation thickness
compliance is achieved. Concerning rooftop equipment and distribution lines, wind and seismic loading requirements can
• Pipe content
become significant, and are specifically addressed in mechanical codes and building codes.
• Center line distance between adjacent pipes or ducts
SEISMIC
SEISMIC
• Clearance height above roof
WIND &
WIND &
MIRO Industries has in-house design professionals that can provide a code-compliant sealed submittal, for supporting and
• Project specific wind/seismic support design requirements
restraining your rooftop equipment and distribution lines. Our objective with any project is to provide an economical and
sustainable solution that meet equipment support and anchorage requirements. This means that we design solutions that
Additional information on needed requirements can be found in the Downloads section at
are practical, less complex to install, and easily weatherproofed using typical roofing methods. MIRO Industries has 30+
miroind.com/products/seismic-wind/
years of experience providing support solutions for rooftop equipment that protect the integrity of your roof.
* Component connection to the frame may be different than shown. Stanchions are designed for project specific
ACCESSORIES
ACCESSORIES
applications.
PILLOW BLOCK
ACCESSORIES
Fitted Support Pads
ROLLER SERIES
ROLLER SERIES
Pillow Block Spacers
MIRO Industries custom support pads are designed specifically to fit the MIRO polycarbonate non-penetrating Pillow Block Spacers are designed to provide an elevation increase of 1 1⁄2” on the 1.5 and 2” on the 3-R series of Pillow Block
supports. The slip-resistant pads have a small lip to hold the base to the pad and reduce movement on the rooftop supports. The edges are gently rounded to prevent gouging the roof. A maximum of 2 spacers can be used under each
while also protecting the roof membrane. The holes in the pad save weight and allow for venting and drainage. The support.
pads are heat molded using 100% recycled rubber.
ELEVATE SERIES
STRUT SERIES
1.5 Spacer 3-R Spacer
MISC. SUPPORTS
MISC. SUPPORTS
SPACER CASE SHIPPING
HEIGHT
15 1⁄4” MODEL QUANTITY WEIGHT
12” 12” 9”
7 1⁄2” 10”
1.5 1 1⁄2” 63 22 lbs.
CUSTOM HANGER
3-R 2” 24 20 lbs.
CUSTOM DUCT
CUSTOM DUCT
ADJUSTMENTS
SLOPE
SLOPE
16” x 18” 19” x 23” 1.5 Pipe Guide 3-R-2 Pipe Guide 3-R-4 Pipe Guide 3-RAH sizes:
1.5” Nominal pipe 3” Nominal pipe 3” Nominal pipe 3” Nominal pipe (stock)
1” Nominal pipe
2” Nominal pipe
MECHANICAL
MECHANICAL
SUPPORTS
SUPPORTS
SUPPORT PAD SIZE WIDTH LENGTH INDIVIDUAL WEIGHT
SUREFOOT ACCESS
7 1⁄2 x 10 7 1⁄2” 10” 2 lbs.
ACCESSORIES
ACCESSORIES
*Limited Warranty details available at www.miroind.com/warranty 2.5 2.47 2.88 5.80 7.87 2.32 2.88 7.67 9.51 2.5 2.47 2.88 5.9 7.97 2.32 2.88 7.8 9.64
Standard Terms and Conditions of Sale (the “Website”). Any warranty terms listed herein are merely
3 3.07 3.50 7.58 10.79 2.90 3.50 10.26 13.13 3 3.07 3.50 7.8 11.00 2.90 3.50 10.5 13.36
for convenience only and in the event that any of the terms or
PRICES conditions herein conflict with the provisions, terms, or conditions 3.5 3.55 4.00 9.12 13.40 3.36 4.00 12.52 16.37 3.5 3.55 4.00 9.3 13.58 3.36 4.00 12.8 16.65
All prices are List and applicable only within the Continental United on the Website, the Limited Warranty on the Website shall control.
MIRO Industries, Inc. may change, amend, or modify its Limited 4 4.03 4.50 10.80 16.32 3.83 4.50 15.00 19.98 4 4.03 4.50 11 16.52 3.83 4.50 15.3 20.28
States. Prices are subject to change without notice.
Warranty, in whole or in part, in its sole discretion, and any such
5 5.05 5.56 14.63 23.30 4.81 5.56 20.80 28.69 5 5.05 5.56 15 23.67 4.81 5.56 21.3 29.18
CREDIT change, amendment, or modification shall be effective upon posting
Invoices are due upon receipt and are past due after 30 days. A on the Website. 6 6.07 6.63 18.99 31.52 5.76 6.63 28.60 39.90 6 6.07 6.63 19.4 31.92 5.76 6.63 29.2 40.50
charge of 1½% per month of such maximum lesser amounts as is 8 7.98 8.63 28.58 50.27 7.63 8.63 43.43 63.23 8 7.98 8.63 29.2 50.88 7.63 8.63 44.4 64.19
authorized by law, will be made on overdue accounts. Purchaser MIRO hereby disclaims and assumes no responsibility for incidental
agrees to be subject to the jurisdiction of state and federal courts or consequential damage to the structure, its contents, loss of time,
10 10.02 10.75 40.52 74.71 9.56 10.75 64.39 95.53 10 10.02 10.75 41.4 75.57 9.75 10.75 56 88.35
of Utah in any dispute over invoices and to pay reasonable attorney profits, energy or any inconvenience from any type of roof leak or
fees. damage. 12 11.94 12.75 53.57 102.10 11.38 12.75 88.59 132.66 12 12.00 12.75 50.7 99.71 11.75 12.75 67 113.99
Please contact MIRO Industries, Inc. at 1-800-768-6978 or email at sales@miroind.com if you incur any problems or have any questions
regarding these specifications.
DIVISION 15 DIVISION 21
Section 15050 - Basic Mechanical Materials and Methods Section 21 00 00 - Fire Suppression
15060 - Hangers and Supports 21 05 29 - Hangers & Supports for Fire
15070 - Mechanical Sound, Vibration, and Suppression Piping & Equipment
seismic control 21 05 48 - Vibration & Seismic Controls for
15090 - Mechanical Restoration and Retrofit Plumbing, Piping & Equipment
15411 - Fittings, Trim, and Accessories
15700 - Heating, Ventilating, and Air DIVISION 22
Conditioning Equipment Section 22 00 00 - Plumbing
15820 - Duct Accessories 22 05 29 - Hangers & Supports for Plumbing,
Piping & Equipment
DIVISION 16 22 05 48 - Vibration & Seismic Controls for
Section 16070 - Hangers and Supports Plumbing, Piping & Equipment
16700 - Communications
DIVISION 23
Section 23 00 00 - Heating, Ventilating & Air
Conditioning (HVAC)
23 05 29 - Hangers & Supports for HVAC
23 05 48 - Vibration & Seismic Controls for
HVAC Piping & Equipment
23 33 00 - Air Duct Accessories
DIVISION 26
Section 26 00 00 - Electrical
DIVISION 27
Section 27 00 00 - Communication