of vSWR and Impedance of Rectangurar waveguide. Objectives: 1' Determination of volkrge standingrvave 2. Determination of the impedance of ,n* ratio (vswR) of rectangular waveguide. 3' Familiarization of smith chart and from rvave guide trr" ,riitr, measurement of impedance. "r,art Procedure: 1. Set up text fixture
Rectangul*r vfaveguids
2' connect one of the video cabres
from the detector on the on the power supply. srotted rine to the ^ 3. I'SWR Turn on power supply urO uppfy r_f power. slotted rin" una ua:uJ, ro.maximum ! Y::"::::: 5 attenuator set deflection. ai*";;;;;:lii:,::il]o [,flj:::*:: full scale reading. uo",uator ror a close to 6 Move the probe for a maximum reading. 7' Adjust the short feed attenuator for a reading of about % 8' Measure and record the reading, scare. th" points indicated on tabre "t 1.1 Table l.l