Jetpro Is Experienced in Street Lighting Using Hybrid Power Using hybrid power for energy saving is the trend. Jetpro has the technology of street lighting using wind and solar hybrid power. LED or other energy saving light bulbs are suggested. Jetpro street light technology covers from: 10~120W light bulbs, 12 or 24V, wind turbine from 100~400W, solar PV from 40W~160W. Grid power as a back up may be considered. Hybrid Power Street Light is A Mature Technology Typical Example – Specs Item General Specs
LED light bulb 60W, with controller
Solar PV Single crystal solar PV, 80W x 2 pcs, 24V, Solar charge controller 24V output Solar panel tray Aluminum frame to support solar PV Wind turbine Rated 200W at 12m/s rated speed, shrouded, 5 blades, 10kg x 1 pc, follow wind automatically, permanent magnet brushless generator, wind energy conversion ratio Cp=0.45, Wind turbine charge 24V output controller Battery Deep Cycle 100AH x 2 pcs, 12V Pole 8m, iron tube with plastic coating or paint, flange on top for wind turbine installation, Control box Water proof steel box with corrosion proof paint Battery box Water proof steel box with corrosion proof paint ATS Automatic switch, 20A, used if grid power connected Timer Control the light bulb time for use Cable 30m-40m, 12 ~ 14 gage wire