Professional Documents
Culture Documents
GENERAL NOTES:
A3
1.This MTO shall be read inconjunction with the following documents and all MTO shall satisfy the requirements shown
in these documents.
A3
3. For fittings with two different thickness such as Reducing Tee and Reducers, vendor to take fitting with high thickness
and machine to suit the ends of small thickness.
4. Flange Face finish : SWRF, WNRF Flanges, Blind flanges, spectical blinds face finish shall be 125-250 µ in AARH
and for RTJ Flange 63 µ in AARH.
5. flange with JSA : Flange should be provided with Jack Screw arrangement.
SUB-CONTRACTOR OWNER
R147 SWAGE CONCENTRIC NIPPLE 50 25 SCH 160/XXS LEB - SEP D CS, ASTM A234 GRADE WPB-SMLS, BS 3799 NO. 1 -
R148 SWAGE CONCENTRIC NIPPLE 80 25 SCH 80/XXS LEB - SEP D CS, ASTM A234 GRADE WPB-SMLS, BS 3799 NO. 1 -
SUB-CONTRACTOR OWNER