Professional Documents
Culture Documents
Radio Network Planning Flow PDF
Radio Network Planning Flow PDF
Flow of Radio
Network Planning
ISSUE 4.0 www.huawei.com
Implementation
Network
Planning
Target
Network
Optimization
Customer
Traction
Tender documents acquire RNP Service
and project kick off
(compulsory)
Information collection
Customer Requirement Analysis
RNP Service
CW Test
(optional)
Propagation Model Tuning
Network Dimensioning
RF Survey
Spectrum Test
Simulation
RNP Technical Proposal
Performance Promise (KPI)
SOC Reply
Scheme Clarification
Bidding
implementation
Key Points: RNP scheme and Risk Estimation Report, Pre-planning Report
Information
Collection
CW Test
Propagatio
n Model
Site Selection Tuning
Spectrum Test
The Propagation model is the basis of the network planning. Whether the model is
effectual or not affects the planning result, and it also decides whether we can meet the
requirement with economic and proper investment.
• PROPAGATION MODEL
Propagation scene Output
TUNING REPORT
classification Attention:
Representative test For years’ development, the company
location selection has a model library. It is recommended to
Preparation of the testing
obtain the model from the model library.
For the requirement from the customers,
instruments and software
we can choose the typical area and have a
The related referenceCW test. The model Tuning is base on the
test result.
To have a survey for each candidate site. Collect RNP and environment
Information and confirm whether the site spot meet the requirements or not.
Attention:
Topology map • For the matching site spots, record and confirm the
of the network baseengineering
stations parameters; for the ones
unsuited, give
ENGINEERINGPARAMETER
the replacing suggestion and perform the simulation
Survey equipments• All the site spots which are failedTABLE
to be survey by
customers’ cause should be recorded RFin the survey REPORT
SURVEY
Related references
memo. On site survey table
• For co-site RF survey, enough independence should
be considered. SURVEY MEMO
• RF survey factors
Key points to be monitors:
The following needed to be reviewed: Engineering parameters table,
base station topology, and antenna feeders selection.
spot-check the survey result.
To make sure that the occupied spectrum is available, we can have a to spectrum
test on site. Generally, the test can be performed during the survey.
Attention:
• For large-scale trail network, spot-check is
• The test instruments
acceptable considering the workload.•EM INTERFERENCE TEST TABLE
and fittings • Drive Test should be taken for the•EM
downlink band
BACKGROUND TEST REPORT
• Related reference
Output
Simulation should be performed after survey based on the survey result. The
simulation is a process keep adjusting the planning configuration to meet the
requirement of the customers.
Attention:
• If the site’s situation do not meet the
ENGINEERING PARAMETERS TABLE should be taken to
requirements, judgment
Propagation Model determine whether to select a new site or not.
Parameters required• Ifinthe
the simulation
simulation result does not meet the
Simulation softwarerequirement. Survey and simulation should be
Digital map reworked until the target was fulfilled. Then,
Related references we can output the NETWORK SIMULATION
REPORT.
XXX Project Network Simulation Report
Key Point:
Pre-planning result and pre-planning report review
Simulation
Site
Evaluation
Engineering Parameters
Implementation
Key point:
The cooperation of RF survey, MW survey, and site design survey
RF Survey Report, Site Evaluation Report, Engineering Parameters Table
Implementation
Key Points:
The Radio Network Planning Proposal must be evaluated internally,
and be confirmed by the customers
Set the single cell into a connected network and guide the later
implementation
Make the parameter running script or DBF files according to the parameters design
result.
Attention:
• The DBF file or the
script file must be
• CELL PARAMETERS DESIGN
consistent with the
REPORT or NETWORK PLANNING • DBF file or the script file
network planning result
DESIGN REPORT
Attention:
• RADIO NETWORK
• The planning rule of all parameters
PLANNING PROPOSAL
must be embodied in the Planning
• RADIO NETWORKScheme
PRE-PLANNING REPORT
for the convenience • NETWORK PLANNING SCHEME
of others,
• CELL PARAMETER DESIGN
and it is help REPORT • NETWORK PLANNING SCHEME
to guide the later network
optimization. COMMUNICATION REPORT
Key points:
To review the Planning Proposal and planning scheme