You are on page 1of 2

Mercury Series

Single Phase
Lora Energy
Electrical Parameters

LXSZ®LoRaWAN Smart Water Meter


Connection Wiring
Nominal voltage
m3/h
1P2W LNNL (BS)0.03125
/ LLNN (DIN) 0.05 0.07875
1P3W L1L2 L2L1 / L1L1 L2L2

EnergyWater
Meter
m3/h
120V ~ 240 V 0.05 0.08 0.126

Prepaid Meter
Operating voltage range 70% ~ 130% Un

With LCD
Meter
Basic current m3/h
5A 3.123 5 7.875
Maximum current 40A, 60A, 80A, 100A

CL710K22 Description:
Starting current
Frequency
0.4‰Ib / 20mA
50 Hz and 60 Hz ± 5%
Mercury series LXSZ ®LoRaWAN prepaid water meter is Accuracy kWh/kVarh Class 1 / Class 2(IEC), Class B(MID)
IMPELLER (turbine) water meter with wet type liquid Pulse constant 1000 imp/kWh, 1000 imp/kVarh
protected register (dry type as option) for residential
Transitional flowrate Q2voltage circuit
Power consumption m3/h 0.03125
<=0.75W; <=1.75VA
application with sizes from Dn15 to Dn25. Mercury-LXSZ
Power consumption current circuit <=0.3VA
prepaid water meter consists of mechanical water meter,
electric ball valve, intelligent unit (IU) with LoRaWAN Overload flowrate
Max power Q4
consumption in
3.2W
voltage circuit with PLC module
wireless technique and built-in lithium battery. With the
signal from the water meter to IU, the IU knows the exactly EMC/EMI
volume of water pass through the water meter. Electrostatic discharge IEC61000-4-2 Contact discharge, 8kV, 10 cycles; / CLOU internal test 10kV
Air discharge, 15kV, 10 cycles; / CLOU internal test 18kV
The credit of the water usage would downlink from the Immunity to RF fields IEC61000-4-3 150kHz~ 80MHz 10V/m 80MHz ~ 2GHz 30V/m
system to meter and store in the IU which would control
Fast instantaneous pulse group IEC62052-11 m3/h
4kV @100kHz; / 0.03125
CLOU internal test 4.3kV @100kHz
the electric ball valve under the “open” condition. When the
Surge 4kV / CLOU internal test 4.3kV
credit used up, the IU would send the instruction to the
electric ball valve to close the valve. Meanwhile, any Isolation IEC62052-11
external magnet close to the water meter to interference Insulation protection m3/h
Class II 0.03125
the pulse output signal would be detected by IU which Immunity to Impulse voltage IEC 62052-11 m3/h 0.05 test 6.5kV
6 kV / CLOU internal
would send the instruction to close the valve immediately. AC voltage on main circuit 4 kV @2mA;/ CLOU internal test 4.1 kV @2mA;
The end-user would easily read the information of the AC voltage on Auxiliary Contact m3/h
2 kV @2mA;/ CLOU
3.123internal test2.5 kV @2mA;
water meter such water volume usage, credit by built-in LoRa Parameters
LCD display. LXSZ ®LoRaWAN water meter is IP65 water
Working Frequency 470MHz - 510MHz 863MHz - 870MHz 902MHz - 928MHz
proof.
Max Transmit Power  Up to 20dBm
Receive Sensitivity Down to -137dBm
Bandwidth 125KHz
The LXSZ water meter has been certificated by NMI.  Size
Channels 8 Settable Channels with bandwidth of 125KHz
Features:
LoRa data rate 980bps∼3.125Kbps
IMPELLER wet type water meter adaptive data rate, support spreading factor of SF8~SF10
NMI Certified Tx Transmission Current 126mA
Measurement Range (R): 80 Listen Before Talk (LBT) Yes
Description:
Water temperature for cold water: ≤40˚C Protocol Standard LoRaWAN Class A, Class C
CL710K22®LoRaWAN Single phase smart energy meter is the latest developed products in Venus
Working pressure ≤ 16bar Physical Parameters
meter series. Certificated Resistance to heat and fire class
Built-in shut-off valve with MID and DLMS/COSEM, it provides an excellent and stable accuracy and m3/h
V0 (all the casing0.03125
made out of heat-resistant and fire-retardant material)
performance. With built-in LoRaW AN communication module, all the operations can be done remotely Environment class m3/h
M1 / E2 0.05
Prepaid function: the valve close when the remained volume is “0”
from the central server, including meter billing, configuration, credit purchase, alarm events report etc. Specified operating temperature range -25 °C ~ + 55 °C Address
Anti magnetic interference: Valve automatically close with outside magnet interference
Power supply: ER18505M Lithium Thionyl Chloride Battery (3.6V, 4000mAh)
Limit operating temperature range m3/h
-40 °C ~ + 70 °C3.123
(3K7)
PT Delima Anugerah Suplindo
Limit temperature range for
The meter supports exchangeable payment between prepayment and post-paid, and it keeps records -40 °C ~ + 70 °C Jalan Boulevard Barat Raya,
Battery life: up to 5 years storage and transport
of different tampers which can be configured to switch off the load supply when the tamper occurs.
Easy to change battery Relative humidity ≥95%, non-condensing Ruko Inkopal Blok F11, Kelapa Gading,
CL710K22®LoRaWAN provides TOU multi-tariffs, neutral current and maximum demand measurement.
Local LCD display Ingress protection m3/h
IP54 (Indoor) 0.03125 Jakarta Utara 14240, Jakarta.
Clock accuracy m3/h
m3/h
≤ 0.5s /day 3.123
0.05
IP65 water
Product resistant
integrity is maintained by tamper detection and magnetic immunity. And integrated relay
enables the remote
LoRaWAN connection
Compliance: Class A and disconnection of the consumer’s electricity supply.
Meter lifetime ≥ 15 years Mobile Phone
Dimension W × H × D mm 217.4 * 130.0 * 82.5
RTC Function, report data with time stamp 08179189067 (021) 45851017
Email
info@ptdas.co.id
ptdas.co.id
Mercury Series
Three Phase
LXSZ®LoRaWAN
Electrical Parameters
Connection Wiring m3/h 0.03125
3P4W L1L1-L2L2-L3L3-NN 0.05 0.07875
The smart meter complies with the

EnergyWater
Meter Smart Water Meter Nominal voltage m3/h
3*230V/400V 0.05 0.08 0.126 following standards and regulations:
Prepaid Meter
Operating voltage range 70% ~ 130% Un

With LCD Basic current


Maximum current
m3/h
5A
0.25 - 5(100)A
3.123 5 7.875

IEC62052-11 Electricity metering equipment (AC) - General requirements, tests and test conditions,
CL730S22 Description:
Starting current
Frequency
0.4‰Ib / 20mA
50 Hz ± 5% part 11: Metering equipment (equivalent to EN 50470-1)
Mercury series LXSZ ®LoRaWAN prepaid water meter is Accuracy kWh/kVarh Class 1 / Class 2(IEC), Class B(MID) IEC62053-21 Electricity metering equipment(AC) - Particular requirements,
IMPELLER (turbine) water meter with wet type liquid Pulse constant 1000 imp/kWh, 1000 imp/kVarh part 21: Static meters for active energy (classes 1 and 2) (equivalent to EN 50470-3)
protected register (dry type as option) for residential
Transitional flowrate Q2voltage circuit
Power consumption m3/h 0.03125 each phase)
<=0.75W; <=1.2VA(for IEC62053-22 Electricity metering equipment(AC) - Particular requirements,
application with sizes from Dn15 to Dn25. Mercury-LXSZ
Power consumption current circuit <=0.1VA(for each phase)
prepaid water meter consists of mechanical water meter, part 22: Static meters for active energy (classes 0.2 S and 0.5 S) (equivalent to EN 50470-3)
electric ball valve, intelligent unit (IU) with LoRaWAN Overload flowrate
Max power Q4
consumption in
voltage circuit with PLC module
5W IEC62053-23 Electricity metering equipment(AC) - Particular requirements,
wireless technique and built-in lithium battery. With the
part 23: Static meters for reactive energy (classes 2 and 3)
signal from the water meter to IU, the IU knows the exactly EMC/EMI
volume of water pass through the water meter. Electrostatic discharge IEC61000-4-2 Contact discharge, 8kV, 10 cycles; / CLOU internal test 10kV IEC62055-31 Electricity metering - Payment systems - Particular requirements – Static payment
Air discharge, 15kV, 10 cycles; / CLOU internal test 18kV meters for active energy (classes 1 and 2)
The credit of the water usage would downlink from the Immunity to RF fields IEC61000-4-3 150kHz~ 80MHz 10V/m 80MHz ~ 2GHz 30V/m EN50470-1 Electricity metering equipment (A.C.) - Part 1: General requirements, tests and
system to meter and store in the IU which would control
Fast instantaneous pulse group IEC62052-11 m3/h
4kV @100kHz; / 0.03125
CLOU internal test 4.3kV @100kHz
the electric ball valve under the “open” condition. When the test conditions - Metering equipment (class indexes A, B and C)
Surge 4kV / CLOU internal test 4.3kV
credit used up, the IU would send the instruction to the EN50470-3 Electricity metering equipment (A.C.) - Part 3: Particular requirements - Static meters
electric ball valve to close the valve. Meanwhile, any Isolation IEC62052-11
Insulation protection
for active energy (class indexes A, B and C)
external magnet close to the water meter to interference m3/h
Class II 0.03125
the pulse output signal would be detected by IU which Immunity to Impulse voltage IEC 62052-11 m3/h 0.05 test 6.5kV
6 kV / CLOU internal WELMEC 7.2 Software Guide (Measuring Instruments Directive 2014/32/EC)
would send the instruction to close the valve immediately. AC voltage on main circuit 4 kV @2mA;/ CLOU internal test 4.1 kV @2mA;
The end-user would easily read the information of the AC voltage on Auxiliary Contact m3/h
2 kV @2mA;/ CLOU
3.123internal test2.5 kV @2mA;
water meter such water volume usage, credit by built-in LoRa Parameters
LCD display. LXSZ ®LoRaWAN water meter is IP65 water
Working Frequency 470MHz - 510MHz 863MHz - 870MHz 902MHz - 928MHz
Function DLMS/COSEM:
proof.
Max Transmit Power  Up to 20dBm
Receive Sensitivity Down to -137dBm
Bandwidth 125KHz IEC62056-21 Electricity Metering – Data exchange for meter reading, tariff and load control
The LXSZ water meter has been certificated by NMI. Channels 8 Settable Channels with bandwidth of 125KHz
Features: Direct local data exchange (supersedes IEC61107)
LoRa data rate 980bps∼3.125Kbps
IMPELLER wet type water meter adaptive data rate, support spreading factor of SF8~SF10
IEC62056-42 Electricity Metering – Data exchange for meter reading, tariff and load control,
NMI Certified Tx Transmission Current
part 42: Physical layer services and procedures for connection-oriented asynchronous data exchange
126mA
Measurement Range (R): 80 Listen Before Talk (LBT)
 Size Yes IEC62056-46 Electricity Metering – Data exchange for meter reading, tariff and load control,
Description:
Water temperature for cold water: ≤40˚C Protocol Standard LoRaWAN Class A, Class C part 46: Data link layer using HDLC protocol
CL730S22®LoRaWAN Three-phase smart energy meter is the latest developed products in Venus meter
Working pressure ≤ 16bar Physical Parameters IEC62056-47 Electricity Metering – Data exchange for meter reading, tariff and load control,
series. Certificated with MID and DLMS/COSEM, it provides an excellent and stable accuracy and Resistance to heat and fire class m3/h
V0 (all the casing0.03125
made out of heat-resistant and fire-retardant material) part 47: COSEM transport layers for IPv4 networks
Built-in shut-off valve
performance. With built-in LoRaW AN communication module, all the operations can be done remotely Environment class m3/h
M1 / E2 0.05
Prepaid function: the valve close when the remained volume is “0” IEC62056-53 Electricity Metering – Data exchange for meter reading, tariff and load control,
from the central server, including meter billing, configuration, credit purchase, alarm events report etc. Specified operating temperature range -25 °C ~ + 55 °C
Anti magnetic interference: Valve automatically close with outside magnet interference part 53: COSEM Application layer
Limit operating temperature range m3/h
-40 °C ~ + 70 °C3.123
(3K7)
Power supply: ER18505M Lithium Thionyl Chloride Battery (3.6V, 4000mAh) Limit temperature range for IEC62056-61 Electricity Metering – Data exchange for meter reading, tariff and load control,
The meter supports exchangeable payment between prepayment and post-paid, and it keeps records -40 °C ~ + 70 °C
Battery life: up to 5 years storage and transport part 61: Object identification system (OBIS)
of different tampers which can be configured to switch off the load supply when the tamper occurs.
Easy to change battery Relative humidity ≥95%, non-condensing IEC62056-62 Electricity Metering – Data exchange for meter reading, tariff and load control,
CL730S22®LoRaWAN provides TOU multi-tariffs, neutral current and maximum demand measurement.
Local LCD display Ingress protection m3/h
IP54 (Indoor) 0.03125 part 62: Interface classes
Clock accuracy m3/h
m3/h
≤ 0.5s /day 3.123
0.05
IP65 water
Product resistant
integrity is maintained by tamper detection and magnetic immunity. And integrated relay
Meter lifetime ≥ 15 years
enables the remote
LoRaWAN connection
Compliance: Class A and disconnection of the consumer’s electricity supply.
Dimension W × H × D mm 300.5 * 175.0 * 92
RTC Function, report data with time stamp

You might also like