Professional Documents
Culture Documents
Replacement of Existing power fencing with Helical Concertina coil on the existing perimeter wall including PPT
Name of Work:
Area in Aerospace Division- HAL(BC)
Supplying & Fixing Y frame made out of MS Angles of required size with
lugs by cutting to required length & fixing independently by concreting in
pockets over the existing perimeter compound wall of approxmately 3.6m
height including one coat of Zinc chromate primer with required
scaffolding and making provision for placing Concertina Coil Fence and
1 7,000.00 Kgs 0.00
straining & fixing 4 strands barbed wire (2 each on both side of MS Y
frame) & 3 nos on vertical face of the Y frame as directed by EIC.
(Concreting, Barbed wire & Concertina coil will be paid separately)
Supplying, mixing & placing CC 1:2:4 by making pockets using 20mm &
down gga for fixing of MS angles over the existing perimeter wall at all
2 heights including finishing to an even surface finish, scaffolding, curing etc., 67.00 Cu.Mtr 0.00
complete as directed by EIC.
Formwork by providing timber/ M.S sheet with all supports, struts braces,
wedges, scaffolders, bracing ladders gang ways, dressings with oil including
MS bolts, nuts and washers. temporary openings for filleting for stop,
chamfered edges, internal/external splayed rounded angles or grooves for
7 forming throating including removing all materials from the premises after 700.00 Sq.Mtr. 0.00
completion of work etc., complete all as directed for lintels and beams.
(materials contractor's own property)
Providing face work for size stone masonry at any height by squaring back
face beds and joints and providing one line dressing for 25mm for beds and
joints including faces of stone hammer dressed and quoin dressing (two
9 line) 25mm wide each face to a maximum depression of 40mm for 280.00 Sq.Mtr. 0.00
foundation basement and wall etc., complete
Flush pointing to the size stone masonary wall in CM (1:4) including raking
out joints, forming key, line threading and curing at all heights including
10 scaffolding etc., 375.00 Sq.Mtr. 0.00
Supplying & fixing Concertina coil fencing with concertina coil of approx.
dia 600 mm, having 50 spirals per 6m length & spring core wire 2.5mm
thick with 0.5mm thk. cold rolled carbon strip including Supplying,
straining & fixing 4 strands barbed wire (2 each on both side of MS Y
frame) and 3 nos on vertical face of the Y frame of 2.24mm dia; barbed
11 3,000.00 Running Mtrs 0.00
with 2mm dia barbes @ 75mm spacings with nessary staples/ steel pins to
retain horizontal over the perimeter wall (around 3m apart) etc., complete
as directed by EIC
Note
The tenderer shall quote the rates inclusive of GST and all other taxes, duties, levies, fees and charges or any other imposition by the Central / State Government or any statutory authorities of
i)
whatever nature and all other costs including loading, un-loading, Insurance, transportation, testing, Certification expenses etc. L1 (lowest quote) will be determined based on the total quoted
amount inclusive of all taxes and other charges as mentioned above.
ii) Payment will be subject to terms and conditions in the tender document
2) It is recommended that the agency may make a site visit and estimate the quantum of work before submitting the quotation.
No extra claim will be entertained at a later stage citing ignorance of site conditions