Professional Documents
Culture Documents
LABORATORY PROJECT
Your task is to design and build an Adjustable DC Dual Power Supply with the
following design requirements:
➢ Input voltage: 230 VAC/50 Hz (Mains Supply)
➢ Voltage range for both outputs: 0-30 VDC (1.25 V – 30 V is also allowed)
➢ A complete PCB (printed circuit board) design in printed format for both
bottom layer silkscreen-top layer (SST). (Registration ID of all group members
should be printed on the PCB).
➢ PCB should be encapsulated in a box (made with any material like metal,
wood or plastic). In case of metal box, care must be taken to prevent any
direct connection of your circuit with metal box (i.e. a short circuit).
A plagiarism free technical report is required for this project. Any type of plagiarism
will lead to an F grade in the lab for all the students involved. The body of the report
should contain:
• Abstract (a brief summary of the project)
• Objective
• Procedure
• Schematic and PCB layout design
• Bill of materials (a list containing the name and quantity of all the components
used along with the component references in the schematic)
• A list of project expenditures
• A short paragraph of what you learnt in the project
• Conclusion
COMPONENTS
You can only use the components from the following list: