Professional Documents
Culture Documents
Petrel Reservoir Geomechanics 2013 PDF
Petrel Reservoir Geomechanics 2013 PDF
Geomechanics
Version 2013.1
Release Notes
Proprietary Notice
Copyright (c) 2013 Schlumberger. All rights reserved. Reproduction or alteration without prior written
permission is prohibited, except as allowed under applicable law.
Use of this product is governed by the License Agreement. Schlumberger makes no warranties, express,
implied, or statutory, with respect to the product described herein and disclaims without limitations any
warranties of merchantability or fitness for a particular purpose.
"Schlumberger," the Schlumberger logotype, and other words or symbols used to identify the products and
services described herein are either trademarks, trade names, or service marks of Schlumberger and its
licensors, or are the property of their respective owners. These marks may not be copied, imitated, or used,
in whole or in part, without the express prior written permission of their owners. In addition, covers, page
headers, custom graphics, icons, and other design elements may be service marks, trademarks, and/or
trade dress of Schlumberger and may not be copied, imitated, or used, in whole or in part, without the
express prior written permission of Schlumberger.
Table of Contents
Petrel Reservoir Geomechanics – What’s new in 2013.1 ................................................................................. 1
Licensing and Installation .................................................................................................................................. 2
Platform Availability ........................................................................................................................................... 3
Required software ........................................................................................................................................ 3
Known Issues .................................................................................................................................................... 4
i
Release Notes
• The latest VISAGE finite element geomechanics simulator (with full functionality for faults, fractures,
multi-million cell models, and MPI parallel).
• An improved Petrel module providing the user-interface for all simulation pre-processing (grid
embedment, property modeling and population, boundary conditions, one-way and two-way coupling
between VISAGE and ECLIPSE, run-launch, and run-management) and post-processing (results
viewing and quality checking).
These allow you to undertake 3D and 4D geomechanical modeling, starting with existing reservoir models,
existing Petrel structural and property models, or new Petrel models created from scratch.
1
Release Notes
VISAGE Parallel VISAGE Parallel MPI (4) A VISAGE-MPI license increases the
MPI number of cores on which a run can be
VISAGE Parallel MPI (8) executed:
• a single processor license plus a
VISAGE Parallel MPI (16)
VISAGE Parallel MPI (4) license allows
the simulation to be run up to 4-way
VISAGE Parallel MPI (32) parallel;
• a single processor license plus a
VISAGE Parallel MPI (64) VISAGE Parallel MPI (8) license allows
the simulation to be run up to 8-way
parallel;
• etc.
The installation instructions for components of Petrel Reservoir Geomechanics (i.e., the Petrel module and
the VISAGE Finite Element geomechanics simulator) are provided in the separate Installation Guide.
Note: If you reconfigure Schlumberger licensing, you must restart all applications that use this licensing.
Note: If you install other Schlumberger simulators (such as ECLIPSE) on the same machine, then the
simulators must be installed in chronological order. For example, Petrel Reservoir Geomechanics 2013.1
(with VISAGE) must be installed before ECLIPSE 2013.2.
2
Release Notes
Platform Availability
Petrel Reservoir Geomechanics:
Required software
For 3D geomechanics modeling:
• Petrel Reservoir Geomechanics 2013.1 requires a 2013.1 (or later) Petrel Geoscience core,
Note*
Reservoir Engineering core, or Combined core .
• Petrel Reservoir Geomechanics 2013.1 requires a 2013.1 (or later) Petrel Reservoir Engineering
Note*
core or Combined core .
For 4D geomechanics modeling with two-way coupling between VISAGE and ECLIPSE:
• Petrel Reservoir Geomechanics 2013.1 requires a 2013.1 (or later) Petrel Reservoir Engineering
Note*
core or Combined core .
• ECLIPSE 2013.1 (or later) is also required.
3
Release Notes
Known Issues
This section covers any known issues with Petrel Reservoir Geomechanics and its VISAGE finite element
geomechanics simulator.
• If updating the version of Petrel, first uninstall Petrel Reservoir Geomechanics (including VISAGE),
perform the update, and then reinstall Petrel Reservoir Geomechanics.
• The two-way coupling available with this release provides permeability updating to the ECLIPSE
reservoir simulation. Two-way coupling with porosity updating is not available.
• Discrete Fracture Network (DFN) models are supported with this release, but Implicit Fracture
Network (IFN) models are not supported.
• Support for nodal-based data (allowing display of distorted grids and surfaces) is not available with
this release.
• If a new simulation queue is added in Petrel, this will not immediately appear in the RG Simulation
Launch process. Petrel must be restarted to enable the queue.
• The maximum number of processors for running the VISAGE finite element geomechanics simulator
in parallel (MPI) – specified in the Petrel Reservoir Geomechanics module – is currently one
hundred (100).This release has only been tested to a maximum of 64 processors.
• There is a limit of 99 coupled steps when performing two-way coupled simulations with ECLIPSE.
• For two-way coupled simulations with ECLIPSE, models should be stored on a local or shared drive
when running on remote Linux systems.
• Automatic time-stepping in ECLIPSE can impact results from ECLIPSE restarts. This can cause
differences in two-way coupled simulations. Consult NEXTSTEP keyword in the ECLIPSE
documentation for a solution.
• ECLIPSE well connection factors are not recalculated with time in a two-way coupled simulation.
• The following Petrel functionality is not supported in this release:
o Running remote cases through EnginFrame.
o Transferring geomechanics information between projects using the Reference Project Tool
(RPT).
o Petrel Uncertainty and Optimization (U&O) workflows.