Professional Documents
Culture Documents
Valves
Technical
Information
Directional Control Valves
Technical Information
Using this manual
Organization and To help you quickly find information in this manual, the material is divided into sections,
headings topics, subtopics, and details, with descriptive headings set in red type. Section titles
appear at the top of every page in large red type. Topic headings appear in the left
hand column in BOLD RED CAPITAL LETTERS. Subtopic headings appear in the body
text in bold red type and detail headings in italic red type.
References (example: See Topic xyz, page XX) to sections, headings, or other publications are
also formatted in red italic type. In Portable Document Format (PDF) files, these references
represent clickable hyperlinks that jump to the corresponding document pages.
Tables, illustrations, Tables, illustrations, and graphics in this manual are identified by titles set in blue italic
and complementary type above each item. Complementary information such as notes, captions, and drawing
information annotations are also set in blue type.
References (example: See Illustration abc, page YY) to tables, illustrations, and graphics
are also formatted in blue italic type. In PDF files, these references represent clickable
hyperlinks that jump to the corresponding document pages.
Special text Defined terms and acronyms are set in bold black type in the text that defines or
formatting introduces them. Thereafter, the terms and acronyms receive no special formatting.
Black italic type is used in the text to emphasize important information, or to set-off
words and terms used in an unconventional manner or alternative context. Red and blue
italics represent hyperlinked text in the PDF version of this document (see above).
Table of contents An indented Table of Contents (TOC) appears on the next page. Tables and illustrations
in the TOC set in blue type. In the PDF version of this document, the TOC entries are
hyperlinked to the pages where they appear.
Sauer-Danfoss accepts no responsibility for possible errors in catalogs, brochures and other printed material.
Sauer-Danfoss reserves the right to alter its products without prior notice. This also applies to products
already ordered provided that such alterations aren’t in conflict with agreed specifications. All trademarks in
this material are properties of their respective owners. Sauer-Danfoss and the Sauer-Danfoss logotype are
trademarks of the Sauer-Danfoss Group.
Front cover illustrations: F101 077, F101 130, F101 128, F101 080, F101 127, F101 131, F101 129, F101 079, F101 084, P101 964
Flexibility of design The Sauer-Danfoss directional control valves are designed to give customer flexibility
over a broad range of flow and pressure capabilities. Actuator options include a range
of levers, cable actuators, hydraulic and pneumatic pilot controls, two-axis joysticks,
and electrohydraulic solenoids. Flow rates range from 0 to 100 l/min [26 US gal/min].
Configurations include compact monoblock and flexible modular styles.
Refer to the quick selection matrix on pages 12 and 13 for specific options by model.
Modular valves
Valve l/min [US gal/min] Number
Circuit Page
model of Spools
Parallel
CDS-100 100 [26] 1 to 12 Tandem
Series
Parallel
CDS-60 60 [16] 1 to 12 Tandem
Series
1125 38 [10] 1 to 8 Parallel
Monoblock valves
Valve l/min [US gal/min] Number
Circuit Page
model 20 [5] 40 [11] 60 [16] 80 [21] 100 [26] of Spools
1612 76 [20] 1 Tandem
1617 38 [10] 1 Parallel
1627 38 [10] 2 Parallel
1637 38 [10] 3 Parallel
1618 38 [10] 1 Parallel
MonoBlock Modular
Category Rating / feature 1617/27/37 1618 1612 1125 CDS60 CDS100
19 l/min [5 US gal/min]
38 l/min [10 US gal/min] X X X
Nominal 57 l/min [15 US gal/min] X X
flow 76 l/min [20 US gal/min]
95 l/min [25 US gal/min] X
114 l/min [30 US gal/min]
Parallel X X X X X
Series X
Tandem X X X
Circuit options
Priority X
Power beyond X X X X X X
Closed center X X
Spring center X X X X X X
1 position detent X X X X
2 position detent X X X X X X
3 pos. - 3 way X X X X X X
3 pos. - 4 way X X X X X X
Spool options
4 pos. with float X X X X
4 pos. regenerative
Closed to tank X X X X X X
Work port
Open to tank X X X X X X
neutral options
Meter to tank X X X X
MonoBlock Modular
Category Rating / feature 1617/27/37 1618 1612 1125 CDS60 CDS100
Handle X X X X X X
Mechanical joystick X X X X
Exposed spool end X X X X X X
Covered spool end X X
Actuation
RHC X X X
options
EHC on/off X X
Cable control X X
Hydraulic / pneumatic X X
Dual spool ends X X
<1 cm3/min
X
[0.061 in3/min]
1 to 3 cm3/min
[0.061 to 0.183 in3/min]
4 to 6 cm3/min
[0.244 to 0.366 in3/min]
Maximum work 7 to 10 cm3/min
X
port leakage [0.427 to 0.610 in3/min]
11 to 13 cm3/min
X X X
[0.71 to 0.793 in3/min]
14 to 16 cm /min
3
X
[0.854 to 0.976 in3/min]
16 to 24 cm /min
3
Load check X X X X X X
P.O. check X X X X
Flow control X X
Additional Meter in X X X X
features
Meter out X X
Hydraulic kickout X X X
Electric switch X X X
Fluids Hydraulic fluid performs three basic functions in a hydraulic system: It transfers energy,
lubricates moving components, and transports heat and contaminants out of the system.
Viscosity
Viscosity is the most important property of a hydraulic fluid. It is a measurement of how
the fluid resists flow. Low viscosity fluids increase internal leakage; high viscosity fluids
increase pressure drop through the valve. Use a fluid that meets the viscosity limits
published in this catalog. For specific requirements, see technical data in each section.
Temperature
Temperature affects a fluid’s viscosity. Higher temperature fluid has lower viscosity.
Operating at excessive temperatures may have other detrimental effects on your
hydraulic fluid. Design your hydraulic system to operate within the specified temperature
range. Specific requirements are published in each section.
Filtration Effective filtration is critical to a hydraulic system’s performance and working life. Employ
system filtration capable of meeting the published requirements in each valve section.
Be aware that other components in the system may have more stringent requirements.
Design your filtration system to satisfy the requirements of the most sensitive
component.
Cleanliness
Hydraulic system contamination must not exceed the limits published for each valve.
Limits are specified per ISO 4406 (1999). When measuring system contamination,
calibrate test equipment in accordance with the ACFTD method.
Description Single spool monoblock valve. 76 l/min [20 US gal/min] maximum flow. 207 bar
[3000 psi] maximum pressure.
Typical applications Sweepers, mowers, agricultural equipment, auxiliary valves, tree removal equipment
15.3
Pressure drop [225]
13.79
[200]
12
Pressure - bar [psi] [175] P-W
10.34
[150]
8.8
[125]
6.9
[100]
5 W-T
[75]
MODEL 32
3.45 P-T
[50]
MODEL 22
1.7 P-T
[25]
MODEL 12
0 P-T
0 19 38 57 76
[5] [10] [15] [20]
Flow - l/min [US gal/min]
4-way, 3-position
T Open center
Work ports blocked to tank in neutral position
AB P106 237
P T
4-way, 3-position
V Open center
B port blocked to tank
B P106 238
P T
4-way, 4-position
Open center
F
Work ports blocked to tank in neutral position,
open to tank in fourth position or float
AB P106 239
4-way, 3-position
O Motor open center
Work ports open to tank in neutral position
AB P106 241
Spool action
Code Description Code Description
A Spring centered, detent in float N Spring centered, detent in
D 3-position detent S Spring centered
L Spring centered, detent out
Relief valve
• Pilot operated relief valve
• 0.4 bar per liter [20 psi per gallon] rise
• No restrictions on setting up to 207 bar [3000 psi]
• Adjustable standard
Porting
Inlet/outlet 7/8-14, SAE (standard)
3/4-16 SAE
Locations available top and side
Work ports 3/4-16, SAE (standard)
Handles
• C-hook kit
• Standard handle with C-hook kit
• Pivot-block handle kit
Dimensions
OUTLET PORT
7/8-14 S.A.E. 74.7
[2.94]
B B
52.3
6.4 [2.06]
[0.25]
20.6
8.6
[.81]
[0.34]
22.4 [0.88]
ø.352/.342 5.1
2 MTG. HOLES [0.20]
45.7
[1.80]
22.4 [0.88]
66.0 [2.60]
97.8 [3.85]
7.9 123.9 [4.88]
[0.31]
50.8
[2.00]
39.6
[1.56]
mm [in]
Description Single spool directional control valve with parallel circuitry. 38 l/min [10 US gal/min]
maximum flow. 207 bar [3000 psi] maximum pressure.
Typical applications Lawn and garden tractors, mowers, small tractor loader attachments, sweepers, utility
trucks, trenchers, agricultural equipment
P-W
12.24
[180]
Pressure - bar [psi]
8.16
[120 ]
W-T
4.08
[60]
P-T
0
0 19 38 57
[5] [10] [15]
Flow - l/min [US gal/min]
B, D or F
3-way, 3-position
Open center
V
T
Work ports blocked to tank in neutral position
P106 246
P (B, D, or F)
A, C or E
3-way, 3-position
Open center
X
T P106 247 Work ports blocked to tank in neutral position
P (A, C, or E)
Spool action
Code Description Code Description
A Spring centered, detent in float N Spring centered, detent in
D 3-position detent S Spring centered
L Spring centered, detent out
Relief valve
Code Description
2 Direct-acting ball and spring
• 1 bar/l [50 psi/gal] rise
• Standard setting 83 bar [1200 psi] crack pressure at 2.9 l/min [0.75 US gal/min]
• Not for use on setting over 30 l/min [8 US gal/min]
• Full flow setting at 138 bar [2000 psi]
3 Pilot operated relief valve
• 0.4 bar/l [20 psi/gal] rise
• No restrictions on setting up to 210 bar [3000 psi]
• Standard setting 138 bar [2000 psi] crack pressure at 2.9 l/min [0.75 US gal/min]
Porting
Inlet/outlet 3/4-16, SAE 8 Power-beyond port machined and
Locations available inlet-side, top, end plugged. (Remove plug and install sleeve
outlet-top, end for power-beyond feature.)
Work ports 9/16-18 , SAE-6
Handles
Code Description
C C-hook kit
H Standard handle with C-hook kit
P Pivot-block handle kit
N No handles
Dimensions
9.7 117.3
[0.38] [4.62]
90.4
[3.56] SIDE INLET PORT 3/4-16 S.A.E.
85.9
[3.38] TOP INLET PORT 3/4-16 S.A.E.
72.4
DIRECT ACTING OR [2.85] ø 6.76 [0.266] MGT HOLES 2 PLACES END INLET PORT
PILOT OPERATED 49.3
3/4-16 S.A.E.
RELIEF VALVE OPTIONS [1.94]
AVAILABLE 19.8
[0.78]
B IN
76.2
57.2 65.0 [3.00]
[2.25] [2.56] 57.2
OUT
157.2
STANDARD
39.6 [6.19]
HANDLE
[1.56] OPTION
0.5 "H" CODE
31.8 [0.02]
[1.25]
ø6.50 THRU,TYP.
6.43 3.18 R
156.0 [0.256] [0.125]
[6.14] [0.253]
168.7
[6.64]
CLEVIS 6.53
HANDLE ø 5.40
23.9
[0.94] [0.257]
[0.252]
19.1
[0.75]
22.35
100.3 [0.88]
[3.95]
65.0
PIVOT BLOCK [2.56] 6.50
HANDLE .03 X 45 CMFR ø 6.43 DIA., THRU
OPTION [0.256]
("P" CODE) [0.253]
15.0
[0.59 D]
192.0
[7.56] 8.74
[0.344]
194.1
[7.64]
mm [in]
Description Two-spool directional control valve with parallel circuitry. 38 l/min [10 US gal/min]
maximum flow. 207 bar [3000 psi] maximum pressure.
Typical applications Lawn and garden tractors, mowers, small tractor loader attachments, sweepers, utility
trucks, trenchers, agricultural equipment
16.32
Pressure drop [240]
P-W
12.24
P-T
8.16 W-T
[120]
4.08
[60]
0
0 19 38 57
[5] [10] [15]
Spool types
Options Code Symbol Description
A, C or E B, D or F
4-way, 3-position
C Closed center
P T P106 242
Work ports blocked to tank in neutral position
A, C or E B, D or F
4-way, 4-position
Open center
F
T P106 243
Work ports blocked to tank in neutral position
P Open to tank in fourth position or float
A, C or E B, D or F
4-way, 3-position
O Motor open center
T P106 244 Work ports open to tank in neutral position
P
B, D or F
3-way, 3-position
Open center
V
T
Work ports blocked to tank in neutral position
P106 246
P (B, D, or F)
A, C or E
3-way, 3-position
Open center
X
T P106 247 Work ports blocked to tank in neutral position
P (A, C, or E)
Spool action
Code Description Code Description
A Spring centered, detent in float N Spring centered, detent in
D 3-position detent S Spring centered
L Spring centered, detent out
Relief valve
Code Description
2 Direct-acting ball and spring
• 1 bar/l [50 psi/gal] rise
• Standard setting 83 bar [1200 psi] crack pressure at 2.9 l/min [0.75 US gal/min]
• Not for use on setting over 30 l/min [8 US gal/min]
• Full flow setting at 138 bar [2000 psi]
3 Pilot operated relief valve
• 0.4 bar/l [20 psi/gal] rise
• No restrictions on setting up to 210 bar [3000 psi]
• Standard setting 138 bar [2000 psi] crack pressure at 2.9 l/min [0.75 US gal/min]
Porting
Inlet/outlet 3/4-16, SAE 8 Power-beyond port machined and
Locations available inlet-side, top, end plugged. (Remove plug and install sleeve
outlet-top, end for power-beyond feature.)
Work ports 9/16-18 , SAE-6
Handles
Code Description
C C-hook kit
F Joystick (option)
H Standard handle with C-hook kit
P Pivot-block handle kit
N No handles
Dimensions
117.3
[4.62]
90.4
[3.56]
85.9
[3.38] SIDE INLET PORT 3/4-16 S.A.E.
72.4
[2.85]
DIRECT ACTING OR 49.2 TOP INLET PORT 3/4-16 S.A.E.
PILOT OPERATING 9.7 [1.94] ø 6.76 [0.266] MTG. HOLES 2 PLACES END INLET PORT 3/4-16 S.A.E.
RELIEF VALVE [0.38] 19.8
OPTIONS AVAILABLE 34.3 [0.78] 4 WORK PORTS
[1.35] 9/16-18 S.A.E.
OPTIONAL DIRECT
ACTING RELIEF
IN
A B
104.9
8.6 85.9 93.7 [4.13] 85.9
[0.34] [3.69]
60.5 [3.38] [3.38]
31.8 [2.38]
OUT
22.4 C
[0.88] D [1.25]
OUT 4.8
[0.19] 33.3 6.4
4.8 IN 9.6 [0.25]
[1.31] [0.38] 19.1
[0.19] 19.6
NEUTRAL [0.75]
9.6 15.0 [0.77] TOP OUTLET PORT 3/4-16 S.A.E. 35.1
FLOAT [0.59] [1.38]
[0.38] END OUTLET PORT 3/4-16 S.A.E. 50.8
130.0 OPTIONAL POWER BEYOND PORT 3/4-16 S.A.E. [2.00]
[5.12] Shown for dimensional reference only 60.2
106.4
[2.37]
[4.19]
157.2 STANDARD
39.9 [6.19] HANDLE
[1.57] OPTIONAL
0.5 ("H" CODE)
[0.02]
28.4
156.2 [1.12] ø 6.50 THRU, TYP.
6.43
[6.15] [0.256]
[0.563]
169.2
[6.66]
23.4
[0.92]
19.1
[0.75]
6.4
[0.25]
34.3
[1.35]
43.9
[1.73]
36.1
11.2 [1.42]
[0.44]
5.08
ø 5.31 THRU
[0.200]
[0.209] TANG TYPE SPOOL OPTION mm [in]
Description Three spool directional control valve with parallel circuitry. 38 l/min [10 US gal/min]
maximum flow. 207 bar [3000 psi] maximum pressure.
Typical applications Lawn and garden tractors, mowers, small tractor loader attachments, sweepers, utility
trucks, trenchers, agricultural equipment
3.5
[50] P-T
WP-T
0
0 10 28
[5] [10]
Flow rate - l/min [US gal/min]
Spool action
Code Description Code Description
A Spring centered, detent in float N Spring centered, detent in
D 3-position detent S Spring centered
L Spring centered, detent out
Relief valve
Code Description
2 Direct-acting ball and spring
• 1 bar/l [50 psi/gal] rise
• Standard setting 83 bar [1200 psi] crack pressure at 2.9 l/min [0.75 US gal/min]
• Not for use on setting over 30 l/min [8 US gal/min]
• Full flow setting at 138 bar [2000 psi]
3 Pilot operated relief valve
• 0.4 bar/l [20 psi/gal] rise
• No restrictions on setting up to 210 bar [3000 psi]
• Standard setting 138 bar [2000 psi] crack pressure at 2.9 l/min [0.75 US gal/min]
Porting
Inlet/outlet 3/4-16, SAE 8 Power-beyond port machined and
Locations available inlet-side, top, end plugged. (Remove plug and install sleeve
outlet-top, end for power-beyond feature.)
Work ports 9/16-18 , SAE-6
Handles
Code Description
C C-hook kit
H Standard handle with C-hook kit
P Pivot-block handle kit
N No handles
Dimensions
117.3
85.9 [4.62]
34.5 [3.38] SIDE INLET PORT 3/4-16 S.A.E.
72.1
DIRECT ACTING OR [1.36]
49.3 [2.84] TOP INLET PORT 3/4-16 S.A.E.
PILOT OPERATED RELIEF [1.94] ø 6.76 [0.266] MTG HOLE 2 PLACES
VALVE OPTIONS AVAILABLE 9.9
[0.39] 20.1 6 WORK PORTS END INLET PORT
[0.79] 9/16-18 S.A.E. 3/4-16 S.A.E.
OPTIONAL PILOT
OPERATED RELIEF
IN
A B 114.3 133.4
[4.50] [5.25]
C D 122.2
88.9 [4.81] 114.3
[3.50] [4.50]
E F
60.5
8.6 [2.38]
OUT
[0.34]
22.4
[0.88] 6.4
4.8 [0.25]
OUT 19.6 9.7 31.8
[0.19] [0.77] [0.38] [1.25]
IN 4.8 19.1
[0.19]
NEUTRAL 33.3 14.7 TOP OUTLET PORT 3/4-16 S.A.E. [0.75]
END OUTLET PORT
[1.31] [0.58] 35.1
FLOAT 9.7 3/4-16 S.A.E.
[1.38]
[0.38] OPTIONAL POWER BEYOND PORT 3/4-16 S.A.E.
130.0 Shown for dimensional reference only 50.8
[5.12] [2.00]
106.7
[4.20] 60.2
[2.37]
157.2
STANDARD
39.6 [6.19]
HANDLE
[1.56] OPTION
("H" CODE)
0.5
[0.02]
31.8 ø 6.50 THRU,TYP.
137.7 6.43
[5.42] [1.25] [0.256] 3.18 R
[0.253] [0.125]
156.0 23.4
[6.14] [0.92] ø 6.53
CLEVIS 6.40
HANDLE [0.257]
[0.252]
19.1
[0.75]
100.3 22.35
[3.95] [0.88]
65.5
PIVOT BLOCK [2.58] 6.50
HANDLE .03 x 45° CMFR. 6.43 DIA., THRU
OPTION ø
[0.256]
("P") CODE [0.253]
15.0
[0.59 D]
192.0
[7.56]
8.74
194.3 [0.344]
[7.65]
mm [in]
Description Single spool monoblock valve. 38 l/min [10 US gal/min] maximum flow. 207 bar [3000
psi] maximum pressure.
Typical applications Mowers, sweepers, fork lifts, aerial lift equipment, utility trucks, snow blades, trenchers,
agricultural equipment
13.6
Pressure drop [200]
12.2
[180]
10.9
[160]
9.5
[140]
8.2
Pressure - bar [psi]
[120]
6.8
[100]
5.4
[80]
4.1
[60] 1618 P-T
2.7
[40]
1.4
[20]
0
0 3.8 7.6 11.4 15.1 18.9 22.7 26.5 30.3 34.1 37.8 41.6 45.4 49.2 53.0 56.8
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15]
Relief valve
Code Description
3 Pilot operated relief valve
• 0.4 bar/l [20 psi/gal] rise
• No restrictions on setting up to 210 bar [3000 psi]
• Standard setting 138 bar [2000 psi] crack pressure at 2.9 l/min [0.75 US gal/min]
Porting
Inlet/outlet 9/16 -18 SAE, 3/4 - 6 SAE Power-beyond port machined and
Locations available side, end plugged. (Remove plug and install sleeve
B/D ports - end for power-beyond feature.)
A/C ports - top,end
Work ports 9/16 -18 SAE
Handles
Code Description
N No handles
Dimensions
117.4
85.9 [4.62]
5.6 [0.22] [3.38]
IN
B B
77.7
A B [3.06]
65.0
6.35 [2.56]
[0.25]
WORK PORT
9/16-18 S.A.E.
OUT
DFP
127.5
9.7
5.02
[0.38]
127.5
[5.02]
127.0
31.8 [5.00]
6.35
[1.25] [1.56]
79.3
[3.12]
35.1
[1.38]
A A
6.5 [0.256]
ø6.4 [0.253]
POWER BEYOND
9/16-18 S.A.E.
Shown for dimensional reference only
mm [in]
CDS 100
CDS 60
Typical performance Pressure vs. flow curves for main relief valve
250
[3625]
Based on oil temperature
of 45°–50°C [113°–122° F]. 200
Viscosity 32 mm²/sec [2900]
Pressure - bar [psi]
0
0 10 20 30 40 50 60 70 80 90 100
[2.6] [5.3] [7.9] [10] [13] [16] [19] [21] [24] [26]
Flow - l/min [US gal/min]
8 5 sections 8 4 sections
[116] [116]
4 sections
6 6 3 sections
[87] 3 sections [87]
2 sections
4 4 2 sections
[58] 1 sections [58]
1 sections
2 2
[29] [29]
0 0
0 10 20 30 40 50 60 0 10 20 30 40 50 60 70 80 90 100
[2.6] [5.3] [7.9] [10] [13] [16] [2.6] [5.3] [7.9] [10] [13] [16] [19] [21] [24] [26]
Flow - l/min [US gal/min] Flow - l/min [US gal/min]
Port locations
Code Description
A Top port
B Side port, top port plugged
C Top port, with side gauge port (1/4-in NPT)
D Top inlet and outlet ports (use H, I, J on outlet)
Port types
Code 1 2 3 4 5 6 7 8 9 X
SAE - ORB BSP - Parallel Metric - ISO 6149
available
Port location
D Top inlet and outlet (use with H,I,J, and L outlet covers)
A Top inlet
C Top inlet, gauge port side (1/4 in NPT)
E100 inlet cover
P T
11
[0.43]
C
h 1 in h 7/8 h 7/16
67
[2.64]
max
D
h1 in
47
[1.85]
E Ref. 10782 or
504069
(consult factory for
dimensional drawing)
P101 798
mm [in]
* Default relief setting if not specified
34 520L0564 • Revision B • February 2006
Directional Control Valves
Technical Information
CDS 60 and 100
Mid-inlet type
Code Description
1 Flow divider
2 Flow combiner
Port types
Note: At this time, North Code 1 2 3
America only stocks SAE- SAE - ORB
Oring boss. Threads #8 #10 #12
3/4 -16UNF 7/8 -14UNF 1 1/16-12UNF
Model
Mid-inlet
CDS100
Model
Mid-inlet
CDS60
available
Relief valve A B
A B
Outlet
Bypass
Bypass outlet
Pressure Inlet bypass
Outlet P106 328E
Pressure
Outlet Inlet
(First pump) (Second pump)
A B Relief valve
Relief
valve Plug
A B
Outlet
Bypass
Bypass outlet
Pressure Inlet bypass
Outlet P106 329E
Pressure
Ports
Code Description
A Top outlet
B Side outlet, top plugged
C Side outlet for power beyond (top to tank)
D Top outlet (with closed bypass)
E Top outlet (for electrical control)
F Top outlet (for electrical control, with power beyond)
G Side outlet (for electrical control, top plugged)
H Top plugged
I Top plugged, use with power beyond
J Top plugged for electrical control
L Top plugged for electrical control, use with power beyond
Port types
Code 1 2 3 4 5 6 7 8 9 X
SAE - ORB BSP - Parallel Metric - ISO 6149
available
C T
Bypass PB
S100 outlet cover Pressure
Outlet
H Top plugged
A Top outlet (side plugged) I T
Bypass PB
Pressure
Outlet 30
[1.18]
D*
T
Bypass
Pressure
Outlet
25
[0.98]
Bypass
Pressure
Outlet
J T
Bypass
Pressure
30
Outlet
[1.18]
F T
Bypass PB
Pressure
Outlet
Bypass PB
Pressure CDS 60 30.5
Outlet [1.20]
CDS 100 32
[1.25]
G T
Bypass PB
Pressure
Outlet
CDS 60 30.5
[1.20]
CDS 100 32
[1.25]
P101 799E
*Typically used for high pressure standby.
mm [in]
Port types
Code 1 2 3 4 5 6 7 8 9 X
SAE - ORB BSP - Parallel Metric - ISO 6149
available
Note: at this time, North America only stocks SAE O-ring boss.
B60/100
Bypass
P101 696
Pressure
Bypass
P101 697
Pressure
When two or more sections operate simultaneously, only the section closest to the inlet receives flow.
Bypass
P101 698
P101 743
Pressure core
M 4-way open center
Tank (x2) metering spool P T
P T
* Default relief setting if not specified
520L0564 • Revision B • February 2006 43
Directional Control Valves
Technical Information
CDS 60 and 100
30 CDS 60
A Without spool end B Female spool end (clevis) [1.18]
34
[1.34] CDS 100
8
[0.31] CDS 100 6.4
CDS 60
6.5 [0.25]
CDS 60
[0.26] 8.4
CDS 100
[0.33]
M8 x 1.25
M10 x 1.5
F
ø8
[0.31]
66
D With support CDS 60 [2.60]
70
CDS 100 [2.76]
8.3
[0.33]
M
F Pneumatic
ø8 50
[0.31] [1.97]
1/8" NPT (2x)
E With lever
113
[4.45]
15º
15º
213
[8.39]
Minimum air pressure CDS 60: 5 bar [73 psi]
Minimum air pressure CDS 100: 8 bar [116 psi]
Maximum air pressure: 12 bar [174 psi]
56
CDS 60 [2.20]
L Hydraulic 60
CDS 100 [2.36]
7/16 in UNF
SAE # 4 (2x)
G Cable with lever** H Cable with joystick** N, P, Q Consult factory for drawings
E* D* C* B* A*
26 ø6
[1.02] [0.24]
280
[11.02]
7
[0.28]
7 30º 30º
[0.28] 50 395
[1.97] 25° 25°
[15.55]
157
[6.18]
48
[1.89]
Switches have 3 Amp capacity
70
40 Ø [2.76]
118.5
[1.57] [4.66]
50
[1.97] 97
[3.82]
P101 779
2 M
1
2
15º
83
J Electrical** [3.27]
117
[4.61]
(Ref.) (Ref.) DIN 43650
Flying leads
**See cabling and electrical
options, page 47.
12VCC 12VCC
90
[3.54]
1.5m 24VCC 24VCC
96
[3.78]
Standard sections cannot be
[5 ft]
(Ref.) (Ref.) converted to electrical due to
internal pilot.
Manual override
Minimum pilot pressure to
actuate: 35 bar [500 psi]
P101781a
mm [in]
* Default relief setting if not specified
520L0564 • Revision B • February 2006 45
Directional Control Valves
Technical Information
CDS 60 and 100
P106 326
P106 325
Actuation mounting 1 Actuation on A port side (RH inlet shown) 2 Actuation on B port side (LH inlet shown)
side
CDS100 CDS60
A A A A T
B B P
P B B
T A A P B B T
P101 796
P101 822
CDS100 CDS60
Spring force
CDS 60: 145-155 N [32-35 lbf ]
CDS 100: 240-245 N [54-55 lbf ]
D Spring center out, detent in E Spring centered, detent in A and B F Spring centered, hydraulic unlock
56 56 92
CDS 60
[2.20] [2.20]
CDS 60 [3.62] CDS 60
73 73 96
[2.87] CDS 100 [2.87] CDS 100 [3.78] CDS 100
G Spring centered, adjustable stroke H Spring centered, female extension I Spring centered, male extension
70 CDS 60 88±5 88±5
[2.76] [3.46±0.2] CDS 60 [3.46±0.2] CDS 60
81 93 ±5 93 ±5
[3.19]
CDS 100
[3.66± 0.2] CDS 100 [3.66± 0.2] CDS 100
Ø 8 8
[0.31] Ø
[0.31]
CDS 60
6.4
[0.251]
8.4
[0.331] 20.5 8.3 20
CDS 100 [0.81] [0.33] [0.79]
65 82 CDS 60
CDS 60
[2.56] [3.23]
78 CDS 100 10 CDS 60 101 CDS 100
[3.07] [0.39] [3.97]
12.5 CDS 100
[0.49]
32 32 32
[1.26] CDS 60 [1.26] CDS 60 [1.26] CDS 60
40 40 40
[1.57] CDS 100 [1.57] CDS 100 [1.57] CDS 100
P Spring centered with switch: Q Spring centered with switch: R Spring centered with switch:
activates on spool in activates on spool in and out activates two motors
CDS 60 32
[1.26]
CDS 100 40
32 CDS 60 [1.57]
[1.26]
6.5 [0.26] CDS 60
40 CDS 100
CDS 60 CDS 60 8.0 [0.32] CDS 100
6.5 [0.26] [1.57]
6.5 [0.26]
8.0 [0.32] 8.0 [0.32]
CDS 100 CDS 100
P106 330E
mm [in]
* Default relief setting if not specified
520L0564 • Revision B • February 2006 49
Directional Control Valves
Technical Information
CDS 60 and 100
J¹ 11
[0.43]
A¹ 11
[0.43]
K² 10
[0.39]
1 in 1 in 1 in
For 3 ways spools. For valves B, C, F, G, and I For valves D and E.
B³ 1 in 11/16 7/16
T P
67
[2.64]
Max
C 1 in
47
[1.85] Standard
29 Short version
[1.14] (use with electrical
Central body for use with auxiliary valves actuation)
D4 1 in
16
[0.63]
E4 1 in 7/8
5/8
62 CDS 60
[2.44] Knob
Max
F 1 in
12
[0.47]
¹ Order code H for plastic plug in auxiliary port of 3-way G³ 1 in 11/16 7/16
4
When using options D and E, electrical actuators must
be mounted upside down.
P101 746E
29
mm [in] [1.14]
B — — — —
C — — —
D — — — — — — — —
E — — — — — — — —
F — — —
G — — — —
I — — — — —
J — — — — —
K — — — — — — —
30 46 82
[1.18] [1.81] [3.23]
46
[1.81]
142
[5.59]
38
[1.49]
100
[3.94]
25 25 127
15
[0.98] [0.98] [5.00]
[0.59]
X
Reference dimensions
10
[0.39] Number of
X Y
sections
R 5.5 1 95 [3.74] 137 [5.39]
[0.22]
A A 2 139 [5.47] 181 [7.13]
3 184 [7.24] 226 [8.89]
4 229 [9.02] 270 [10.63]
t 27 N•m 5 273 [10.75] 314 [12.36]
20 lbf•ft
6 318 [12.52] 359 [14.13]
P B B T
7 362 [14.25] 403 [15.87]
8 406 [15.98] 448 [17.64]
9 451 [17.76] 492 [19.37]
10 495 [19.49] 537 [21.14]
11 540 [21.26] 581 [22.87]
12 584 [22.99] 626 [24.65]
44.5
[1.75]
mm [in]
* Default relief setting if not specified
520L0564 • Revision B • February 2006 51
Directional Control Valves
Technical Information
CDS 60 and 100
120
Dimensions CDS 60 [4.72]
Y 56 74*
[2.20] [2.91]
24
[0.94]
38 38
[1.50] [1.50]
119
[4.69]
82
[3.23]
32
[1.26]
14
[0.55] 98
[3.86]
18 18
[0.71] [0.71] Reference dimensions
X Number of
X Y
sections
1 72 [2.83] 112 [4.41]
2 108 [4.25] 148 [5.83]
3 144 [5.67] 184 [7.42]
A A 4 180 [7.09] 220 [8.66]
T 5 216 [8.50] 256 [10.08]
6 252 [9.92] 292 [11.50]
28.5
[1.12] 7 288 [11.34] 328 [12.91]
8 324 [12.76] 364 [14.33]
26 P B B
[1.02] 9 360 [14.17] 400 [15.75]
t 18 N•m 10 396 [15.59] 436 [17.17]
13 lbf•ft
11 432 [17.01] 472 [18.58]
r. 4.5
[0.18] 12 468 [18.43] 508 [20.00]
13
[0.51]
P101 795
36
[1.42]
Mounting requirements
A
B
77 78
P106 331E
Flatness 0.5-0.8 [0.02 to 0.03] max Flatness 0.5-0.8 [0.02 to 0.03] max
Typical applications Car transport haulers, small backhoes, utility trucks, and mini-excavators
8.3
[120]
6.9
[100]
5.5
[80]
2-Spool Valve
4.1
[60]
2.8
[40]
1.4
[20]
0
0 3.8 7.6 11.4 15.1 18.9 22.7 26.5 30.3 34.1 37.8
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10]
Flow - l/min [USgal/min]
159
[2300]
155
[2250]
152
[2200]
148
[2150]
145
[2100]
141
[2050]
138
[2000] 0 7.6 15.1 22.7 30.3 37.8 45.4 53.0
[2] [4] [6] [8] [10] [12] [14]
Flow - l/min [USgal/min]
With system relief SVPR set to 138 bar [2000 psi] at 2.8 l/min [0.75 US gal/min]
With work port relief SVLP set to 206 bar [3000 psi] at 2.8 l/min [0.75 US gal/min]
230
[3300]
224
[3250]
221 2-Spool Valve
[3200]
217
[3150]
214
[3100]
210
[3050]
207
[3000] 0 7.6 15.1 22.7 30.3 37.8 45.4 53.0
[2] [4] [6] [8] [10] [12] [14]
Flow - l/min [USgal/min]
With work port relief SVLP set to 206 bar [3000 psi] at 2.8 l/min [0.75 US gal/min]
Typical circuit
A A A A
SVHC
PB
P
SVPR
B B B B
SVLP SVLD SVLP
Dimensions
OUTLET PORT
POWER-BEYOND 7/8-14 SAE 7/8-14 SAE
36.5 WORK PORTS
19.1 170.8
[1.44] 3/4-16 SAE
[0.75] [6.72]
NEUTRAL 8 PLACES
IN 4.8
[0.19] 17.3
OUT 4.9
[0.19] 22.3 [0.68] 62.1 TYP.
8.6 [0.88] 33.3 [2.44]
[0.34] [1.31]
Dim. A Dim. B
[1.375]
68.6
[2.70]
MOUNTING HOLES
5/16-24 UNF-2B
4 PLACES
OPTIONAL WORK
PORT RELIEF
161.0
[6.34]
153.7 181.3
[6.05 ] [7.14]
106.7
OPTIONAL [4.20] 183.7
HANDLE [7.23]
17.1
[0.68]
34.92
[1.375]
34.92
[1.375] 93.2
83.8
[3.30] [3.67] PIVOT-BLOCK
OPTION
mm [in]
SVPB
SVPR
INLET SECTION T O V SYSTEM RELIEF VALVE
NO RELIEF 156B8353 156B8354 156B8355 156B8009
PORT RELIEF 156B8356 156B8357 156B8358
SYSTEM RELIEF 156B8359 156B8360 156B8361
SYSTEM & PORT RELIEF 156B8362 156B8363 156B8364
SVSK
SEAL KITS
156B8181 -1
156B8181 -2
156B8181 -3
156B8181 -4
156B8181 -5 SVMB
156B8181 -6 SPOOL ACTION KITS
156B8181 -7 156B8399 SPRING-CENTERED
156B8315 3-POSITION DETENT
SVM
ACTUATION
156B8587 HANDLES
156B8302 PIVOTS
SVLP SVB
WORK PORT RELIEF VALVES WORK SECTION T O V
156B8311 500-2500 psi NO PORT RELIEF 156B8365 156B8366 156B8367
156B8312 2500-3000 psi PORT RELIEF 156B8368 156B8369 156B8370
Available on both A and B
work-ports for all sections. SVSB
OUTLET SECTION T O V
NO PORT RELIEF 156B8371 156B8372 156B8373
PORT RELIEF 156B8374 156B8375 156B8376
SVHC
POWER-BEYOND KIT
156B8380
SVAS
SVLD TIE-ROD KITS
WORK PORT RELIEF PLUG KIT 156B8306 -2
156B8379 156B8053 -3
156B8307 -4
Available on both "A" & "B" work 156B8308 -5
ports for all sections. 156B8054 -6
156B8309 -7
156B8310 -8
Model Spool and Action Relief Type/ Settings, Porting, Handles and Packing
1. Model (4 digits)......................................................................................................................................
#1 #2 #3
3. Spool action.............................................................................................................................................
(* Option not available with M handle kit)
A Spring center detent float
C* 2− position detent
D 3 −position detent
F* Friction pad
K Spring center, detent in & out
L Spring center, detent out
M Motor start switch in & out
N Spring center, detent in
O Spring offset
S Spring center
4. Relief valve...............................................................................................................................................................................
1. No relief required
2. Direct acting ball and spring (use for 30 l/min [8 US gal/min] and below)
Standard setting is 83 bar [1200 psi] crack pressure at 2.85 l/min [0.75 US gal/min]
3. Pilot operated relief valve (use for 30 l/min [8 US gal/min] and above)
Standard Setting is 138 bar [2000 psi] crack pressure at 2.85 l/min [0. 75 US gal/min]
(See porting, table 2 next page, to ensure option availability)
4A.......................................................................................................................................................................................................
0 Standard Setting
1 Special Setting
(Specify Special Setting Required) ________ Pressure at _________ US gal/min
6. Handles......................................................................................................................................................................................
C C-hook link only
F Joystick available for 1627 (used with tang spools only)
H Standard handle with connecting hardware
M Cam (offered for 1421 only)
N No handle required (1530 has no handle option)
P Pivot block handle (offers three possible angles in one part)
7. Packing.......................................................................................................................................................................................
S Individually boxed
B Bulked packed
8. Power beyond sleeve Isolates inlet to tank neutral flow, directs flow to desired function down stream of valve
(Bushing required)
Bushing port size
0 None
1 9/16 in
2 3/4 in
3 7/8 in
T
T
A B T A X
4-way, 3-pos. 3-way, 3-pos.
open center open center
work ports blocked to work port blocked to tank
tank in neutral position in neutral - A port
T P
P T
T
T
A B O B V
4-way, 3-pos. 3-way, 3-pos.
open center open center
work ports open to tank work port blocked to tank
in neutral position in neutral - B port
T T
P P
T C T
A B A B R
4-way, 3-pos 4-way, 3-pos
closed center closed center
work ports blocked to tank work ports open to tank
in neutral position in neutral position
T T
P P
T
A B F
4-way, 3-pos
open center
work ports blocked to tank in neutral
open to tank in fourth position float
T
P
Table 2 – porting
Model 4 - No Relief Valve 5 - Ball and Spring Relief Valve 6 - Pilot Operated Relief Valve
1617, 1627, 1637 End In and Out - top in and Out - side In Same as 4, except with ball and spring Same as 4 except with pilot operated
All 3/4-16 SAE relief valve installed at factory, set relief cavity. (Non-standard).
Work ports 9/16-18 SAE at 83 bar [1200 psi].
Power Beyond cavity machined and
plugged with a solid plug at factory.
Black Paint
Work Sections
1st
2nd
Technical Information
4th
5th
6th
7th
8th
9th
10th
11th
12th
Number of sections =
63
64
Control No.
Directional Control Valves CDS60 and CDS100
Subsidiary/Dealer
Specification Order Form
Customer Application
Work Sections
CDS60 and CDS100 price worksheet
1st
2nd
Technical Information
5th
6th
7th
8th
9th
10th
11th
12th
Number of sections =
Price:
Directional Control Valves
Technical Information
Appendix 1 – Order forms
Revision: _________________________
1125 Order Form An order form for Sauer-Danfoss SV 1125 hydraulic valve is shown on the next page.
instructions Photocopy this form and use it for ordering.
Reordering
The space at the top right-hand corner of the form is for Sauer-Danfoss to fill in. The code
number for the whole of the 1125 group is entered here.
In the event of a repeat order all you have to do is enter the number Sauer-Danfoss has
given on the initial confirmation of order.
Please state:
• Code number of all modules required
• Required setting (p) SVPR
Note:
If the 1125 is to be used with phosphate ester this must be stated on the order form.
Cartridge valves
Hydraulic integrated circuits
Local address:
Hydrostatic transaxles
Integrated systems
Fan drive systems
Electrohydraulics
Microcontrollers and software
Electric motors and inverters
Sauer-Danfoss (US) Company Sauer-Danfoss ApS
Joysticks and control handles 2800 East 13th Street DK-6430 Nordborg, Denmark
Ames, IA 50010, USA Phone: +45 7488 4444
Displays Phone: +1 515 239-6000 Fax: +45 7488 4400
Fax: +1 515 239-6618
Sensors
Sauer-Danfoss GmbH & Co. OHG Sauer-Danfoss-Daikin LTD
Postfach 2460, D-24531 Neumünster Sannomiya Grand Bldg. 8F
Krokamp 35, D-24539 Neumünster, Germany 2-2-21 Isogami-dori, Chuo-ku
Phone: +49 4321 871-0 Kobe, Hyogo 651-0086, Japan
Fax: +49 4321 871 122 Phone: +81 78 231 5001
Fax: +81 78 231 5004
www.sauer-danfoss.com
520L0564 • Revision B • February 2006
CCI March 06