Professional Documents
Culture Documents
HYDRAULIC MOTORS
T E C H N I C A L C A T A L O G
MS hydrobases POCLAIN HYDRAULICS
Methodology :
This document is intended for manufacturers of machines that incorporate Poclain Hydraulics products. It describes the technical characteristics
of Poclain Hydraulics products and specifies installation conditions that will ensure optimum operation.
This document includes important comments concerning safety. They are indicated in the following way:
Safety comment.
This document also includes essential operating instructions for the product and general information. These are indicated in the following way:
Essential instructions.
General information .
Volume of oil.
Units.
Tightening torque.
Screws.
2 08/04/2009
POCLAIN HYDRAULICS MS hydrobases
CONTENT
MS02 - MSE02
MSE02 - MSE02 4
MSE03 12
MSE03
MS05 - MSE05
MS05 - MSE05 20
MS08 - MSE08
MS08 - MSE08 30
MS11 - MSE11
MS11 - MSE11 40
08/04/2009 3
MSE02 - MSE02
MS hydrobases POCLAIN HYDRAULICS
CHARACTERISTICS
1 364 [22.2] 182 [11.1] 579 [294] 22 [30] 16.5 [22] 11 [15] 182 228 250 400 [5 802]
2 398 [24.3] 199 [12.1] 633 [322] 165 208 230
86 [5.2] 276*
A 213 [13.0] 339 [172] 260* 343*
Cams with unequal lobes
A 332 [20.2] 528 [268] 22 [30] 16.5 [22] 11 [15] 165 230 400 [5 802]
199 [12.1] 208
Second displacement
4 08/04/2009
POCLAIN HYDRAULICS MS hydrobases
M S 0 2 1 1 2 3 1 2 3 1 2 3 4 1 2 3 4 5 6
MS02 - MSE02
M S E 0 2
Dimensions for 1-displacement valving 13,8 kg [30 lb] 19,9 kg [44 lb]
D D
1 2 3 1 2 3
1 2 1 1
MSE03
MS05 - MSE05
MS08 - MSE08
Cylinder block splines
(as per standard NF E22-141)
Dimension on 2 pins ØV
ØA Module Z Y ØV Y
40 [1,575] 1,667 22 33,446 [1,317] 3,33 [0,131]
ØA
MS11 - MSE11
08/04/2009 5
Dimensions for other valving systems
Dimensions for 2-displacement valving 18,8 kg [41 lb] 24,9 kg [55 lb]
D D
1 2 3 1 2 3
2 1
Dimensions for Twin-Lock™ valving 18,8 kg [41 lb] 24,9 kg [55 lb]
D D
1 2 3 1 2 3
E D
6 08/04/2009
POCLAIN HYDRAULICS MS hydrobases
Dimensions for 1-displacement valving with built-in exchange 19 kg [42 lb] 25.1 kg [55 lb]
D D
1 2 3 1 2 3
MS02 - MSE02
1 4 1 5
MSE03
MS05 - MSE05
Exchange
When a coding request is made, you must specify information on the threshold of the selector and the valve.
- Selector spool
Selector Opening pressure of P
MS08 - MSE08
threshold selector bar [PSI]
bar [PSI] bar [PSI]
6 [87] 6.4±0.8 [93±11.6] P2
- Fitted valve P1
P1 Q2 P2
bar [PSI] L/min [GPM] bar [PSI]
08/04/2009 7
MS hydrobases POCLAIN HYDRAULICS
Chassis mountings
ØM ( 1) ØU S Ra V Class *
180,25 240 0,2 12,5μm 10 120 N.m
10,9
[7,10] [9,45] [0,008] [0,49μin] M12 x 2 [89 lb .ft]
(1) +0 ,3 [ +0,012]
+0,2 [ +0,00 8]
8 08/04/2009
POCLAIN HYDRAULICS MS hydrobases
Hydraulic connections
MS02 - MSE02
M S 0 2
M S E 0 2 1 1 2 3 1 2 3 1 2 3 4 1 2 3 4 5 6
C D F P S
MSE03
Old Standards Power supply Case drain 2nd Control of Control of
standards displacement parking break drum break
control
R-L 1, 2 X XT
A SAE J514 ISO 11 926-1 7/8"-14 UNF 3/4"-16 UNF 9/16"-18 UNF
Ø21 Ø17 Ø13
3 BSPP ISO 1 179-1
MS05 - MSE05
[1/2" dia.] [3/8" dia.] [1/4" dia.]
4 NF E48 050 ISO 9 974-1 M22x1.5 M18x1.5 M18x1.5
R-A 1, 2 Y X
A SAE J514 ISO 11 926-1 7/8"-14 UNF 9/16"-18 UNF 9/16"-18 UNF 9/16"-18 UNF
Ø21 Ø13 Ø13 Ø13
3 BSPP ISO 1 179-1
[1/2" dia.] [1/4" dia.] [1/4" dia.] [1/4" dia.]
4 NF E48 050 ISO 9 974-1 M22x1.5 M14x1.5 M14x1.5 M18x1.5
R-A1-A2 1, 2 X
A SAE J514 ISO 11 926-1 7/8"-14 UNF 9/16"-18 UNF 9/16"-18 UNF
Ø21 Ø13 Ø13
3 BSPP ISO 1 179-1
MS08 - MSE08
[1/2" dia.] [1/4" dia.] [1/4" dia.]
4 NF E48 050 ISO 9 974-1 M22x1.5 M14x1.5 M18x1.5
ISO 9 974-1 M10x1
Max. MS 450 [6 527]
bar [PSI] 1 [15] 30 [435] 30 [435] 120 [1 740]
pressures MSE 400 [5 802]
08/04/2009 9
MS hydrobases POCLAIN HYDRAULICS
Efficiency
MS02
MSE02
10 08/04/2009
POCLAIN HYDRAULICS MS hydrobases
OPTIONS
C D F P S
M S 0 2 1 1 2 3 1 2 3 1 2 3 4 1 2 3 4 5 6
0 0 0 0
M S E 0 2
MS02 - MSE02
You can accumulate more than one optional part. Consult your
Poclain Hydraulics sales engineer.
A-A
Designation
T4 Speed sensor installed 2
TR Speed sensor installed S
Predisposition for speed sensor 8
MSE03
MS05 - MSE05
Max. length Y = 19
Standard number of pulses per revolution = 40
MS08 - MSE08
connection.
7 - Diamond™
MS11 - MSE11
Special treatment of the motor core which considerably increases its strength, making the motor much more tolerant to temporary instances
of the operating conditions being exceeded.
H - High efficiency
Reinforced piston sealing to improve volumetric efficiency.
M - High speed
Under certain conditions, an increase in the maximum speed of 30% above the values indicated in the table on page 2 is possible.
08/04/2009 11
MSE03
MS hydrobases POCLAIN HYDRAULICS
CHARACTERISTICS
1
Cams with
First displacement
Second displacement
12 08/04/2009
POCLAIN HYDRAULICS MS hydrobases
MS02 - MSE02
Dimensions for 1-displacement valving 18,3 kg [40 lb] 24 kg [53 lb]
MSE03
MS05 - MSE05
MS08 - MSE08
Cylinder block splines
(as per standard NF E22-141)
Dimension on 2 pins
ØV
ØA Module Z Y ØV Y
08/04/2009 13
MS hydrobases POCLAIN HYDRAULICS
Dimensions for 2-displacement valving 17,3 kg [38 lb] 23,0 kg [51 lb]
Dimensions for Twin-Lock™ valving 17,3 kg [38 lb] 23,0 kg [51 lb]
14 08/04/2009
POCLAIN HYDRAULICS MS hydrobases
Chassis mountings
MS02 - MSE02
Take care over the immediate environment of the connections.
MSE03
ØM (1) ØU S Ra V Class (*)
180,25 210 0,2 12,5μm 2x5 120 N.m
10,9
[7,10] [8,27] [0,008] [0,49μin] M12 x 2 [88,5 lb.ft]
(1) +0,3 [ +0,012]
+0,2 [ +0,008]
MS05 - MSE05
MS08 - MSE08
MS11 - MSE11
08/04/2009 15
MS hydrobases POCLAIN HYDRAULICS
Hydraulic connections
connections
M S E 0 3
1 1 2 3 1 2 3 1 2 3 4 1 2 3 4 5 6
C D F P S
Efficiency
16 08/04/2009
POCLAIN HYDRAULICS MS hydrobases
OPTIONS
C D F P S
1 1 2 3 1 2 3 1 2 3 4 1 2 3 4 5 6
M S E 0 3 0 0 0 0
MS02 - MSE02
You can accumulate more than one optional part. Consult your
Poclain Hydraulics sales engineer.
A-A
Designation
T4 Speed sensor installed 2
TR Speed sensor installed S
MSE03
Predisposition for speed sensor 8
MS05 - MSE05
Max. length Y = 19
Standard number of pulses per revolution = 40
MS08 - MSE08
Look at the "Mobile Electronic" N° A01889D technical
catalogue for the sensor specifications and its
connection.
08/04/2009 17
MS hydrobases POCLAIN HYDRAULICS
7 - Diamond™
Special treatment of the motor core which considerably increases its strength, making the motor much more tolerant to temporary instances of the
operating conditions being exceeded.
H - High efficiency
Reinforced piston sealing to improve volumetric efficiency.
18 08/04/2009
08/04/2009
POCLAIN HYDRAULICS
MS hydrobases
19
MS11 - MSE11 MS08 - MSE08 MS05 - MSE05 MSE03 MS02 - MSE02
MS05 - MSE05
POCLAIN HYDRAULICS
CHARACTERISTICS
0 468 [28,5] 234 [14,3] 744 [378] 29 [39] 19 [25] 15 [20] 240 450 [6 527]
MS05
1 688 [42,0] 344 [21,0] 1094 [556] 29 [39] 19 [25] 15 [20] 175 400 [5 802]
2 750 [45,7] 375 [22,9] 1193 [606] 160
3 820 [50,0] 410 [25,0] 1304 [663] 145
280 [17,1]
D 419 [25,6] 666 [339] 200
138 [8,4]
234 [14,3]
N 422 [25,7] 671 [341] 240
MS05
188 [11,5]
Cams with unequal lobes
251 [15,3]
29 [39] 19 [25] 15 [20] 400 [5 802]
344 [21,0]
H 595 [36,3] 946 [481] 175
251 [15,3]
374 [22,8]
A 625 [38,1] 994 [505] 160
251 [15,3]
First displacement
Second displacement
* See option ’’M’’ for higher speed.
20 08/04/2009
POCLAIN HYDRAULICS
MS02 - MSE02
C D F P S
M S 0 5 1 1 2 3 1 2 3 1 2 3 4 1 2 3 4 5 6
M S E 0 5
Dimensions for 1-displacement valving 23,7 kg [52 lb] 31,7 kg [70 lb]
D D
1 2 3 1 2 3
MSE03
1 3 1 1
MS05 - MSE05
MS08 - MSE08
Cylinder block splines
(as per standard NF E22-141)
Dimension on 2 pins
ØV
ØA Module Z Y ØV Y
08/04/2009 21
Dimensions for other valving systems
POCLAIN HYDRAULICS
Dimensions for 2-displacement valving 27,6 kg [61 lb] 35,2 kg [77 lb]
1 2 3
2 1
D D
1 2 3 1 2 3
2 2 2 3
mm [in] mm [in]
0 0
Ø 224 - 0,2 Ø 216 - 0,185
ØC 0 0
[ 8,82dia.] [ 8,50 dia.]
- 0,078 - 0,0073
22 08/04/2009
POCLAIN HYDRAULICS
Dimensions for Twin-Lock™ valving 27,6 kg [61 lb] 35,2 kg [77 lb]
D D
1 2 3 1 2 3
MS02 - MSE02
2 E 2 F
MSE03
MS05 - MSE05
mm [in] mm [in]
0 0
Ø 224 - 0,2 Ø 216 - 0,185
ØC 0 0
[ 8,82dia.] [ 8,50 dia.]
- 0,078 - 0,0073
Dimensions for 1-displacement valving with built-in exchange 23,7 kg [52 lb] 31,7 kg [70 lb]
MS08 - MSE08
D D
1 2 3 1 2 3
1 4 1 6 MS11 - MSE11
08/04/2009 23
POCLAIN HYDRAULICS
Dimensions for 2-displacement valving with 27,6 kg [61 lb] 35,2 kg [77 lb]
add-on exchange
0,50 L [30 cu.in] 1,00 L [60 cu.in]
1 2 3
2 4
Exchange
When a coding request is made, you must specify information on the threshold of the selector and the valve.
Selector spool
P
bar
Selector Opening pressure of [PSI]
threshold selector
bar [PSI] bar [PSI] P2
8 [116] 9.9 ±1.2 [144 ±17]
P1
Fitted valve
P1 Q2 P2
bar [PSI] L/min [GPM] bar [PSI]
13.5 [195] 14 [3.7] 16 [232]
18 [261] 15 [3.9] 21 [305]
22 [319] 16 [4.2] 25 [363] Q2 Q
L/min [GPM]
24 08/04/2009
POCLAIN HYDRAULICS
Chassis mountings
MS02 - MSE02
Take care over the immediate environment of the connections.
MSE03
MS05 / MSE05 ØM ( 1) ØU S Ra V Class *
200 265 2x4
P
[7,87] [10,43] M16 x 2
216 267 10
R
[8,50] [10,51] M16 x 2
224 265 2x4
R
[8,82] [10,43] 0,2 12,5μm M16 x 2 210 N.m
MS05 - MSE05
8,8
200 265 [0,008] [0,49μin] 2x4 [155 lb.ft]
P
[7,87] [10,43] M16 x 2
216 267 10
R
[8,50] [10,51] M16 x 2
224 265 2x4
R
[8,82] [10,43] M16 x 2
(1) +0,3 [ +0,012]
+0,2 [ +0,008]
MS08 - MSE08
See generic installation motors N°801478197L.
MS11 - MSE11
08/04/2009 25
POCLAIN HYDRAULICS
Hydraulic connections
connections
M S 0 5
M S E 0 5 1 1 2 3 1 2 3 1 2 3 4 1 2 3 4 5 6
C D F P S
26 08/04/2009
POCLAIN HYDRAULICS
Efficiency
MS02 - MSE02
MS05
MSE03
MSE05
MS05 - MSE05
^
MS08 - MSE08
The starting torque is taken to be approximately
85% of the first value for available pressure. For a
precise calculation, consult your
Poclain Hydraulics application engineer. MS11 - MSE11
08/04/2009 27
POCLAIN HYDRAULICS
OPTIONS
C D F P S
M S 0 5 1 1 2 3 1 2 3 1 2 3 4 1 2 3 4 5 6
0 0 0 0
M S E 0 5
You can accumulate more than one optional part. Consult your
Poclain Hydraulics sales engineer.
A-A
Designation
T4 Speed sensor installed 2
TR Speed sensor installed S
Predisposition for speed sensor 8
5 - Drainage
Additional drain in the cover.
28 08/04/2009
POCLAIN HYDRAULICS
7 - Diamond™
Special treatment of the motor core which considerably increases its strength, making the motor much more tolerant to temporary instances
of the operating conditions being exceeded.
E - Reinforced sealing
Reinforced seals and, for an unbraked motor, a rear reinforced plate (R02 - 8 mm thick, instead of 2 mm).
C D F P S
MS02 - MSE02
M S 0 5 1 1 2 3 1 2 3 1 2 3 4 1 2 3 4 5 6
R 0 5 E
M S E 0 5
MSE03
H - High efficiency
Reinforced piston sealing to improve volumetric efficiency.
M - High speed
MS05 - MSE05
Under certain conditions, an increase in the maximum speed of 30% above the values indicated in the table on page 2 is possible.
T - Soft Shift™
Progressive displacement change (cushioned slide-valve)
MS08 - MSE08
Consult your Poclain Hydraulics sales engineer.
MS11 - MSE11
08/04/2009 29
MS08 - MSE08
MS hydrobases POCLAIN HYDRAULICS
CHARACTERISTICS
MS08
1 1 146 [69,9] 573 [34,9] 1822 [927] 41 [55] 27 [36] 21 [28] 110 400 [5 802]
2 1 248 [76,1] 624 [38,1] 1984 [1 009] 105
390 [23,8]
Q 623 [38,0] 991 [504] 170
233 [14,2]
Cams with unequal lobes
MS08
467 [28,5]
D 700 [42,7] 1113 [566] 41 [55] 27 [36] 21 [28] 140 450 [6 527]
233 [14,2]
467 [28,5]
A 780 [47,6] 1240 [631] 140
313 [19,1]
522 [31,8]
Q 833 [50,8] 1324 [674] 125
312 [19,0]
MSE08
624 [38,1]
D 936 [57,1] 1488 [757] 41 [55] 27 [36] 21 [28] 105 400 [5 802]
312 [19,0]
624 [38,1]
A 1 043 [63,6] 1658 [843] 105
418 [25,5]
First displacement
Second displacement
* See option ’’M’’ for higher speed.
30 08/04/2009
POCLAIN HYDRAULICS MS hydrobases
M S 0 8 1 1 2 3 1 2 3 1 2 3 4 1 2 3 4 5 6
MS02 - MSE02
M S E 0 8
Dimensions for 1-displacement valving 34,4 kg [76 lb] 51,8 kg [114 lb]
D D
1 2 3 1 2 3
1 2 1 1
MSE03
MS05 - MSE05
Cylinder block splines
MS08 - MSE08
(as per standard NF E22-141)
Dimension on 2 pins
ØV
ØA Module Z Y ØV Y
08/04/2009 31
Dimensions for other valving systems
D F D F
1 2 3 1 2 3 1 2 3 1 2 3
1 2 A 0 8 1 1 A 0 8
Dimensions for 2-displacement valving 37,8 kg [83 lb] 54,7 kg [120 lb]
D D
1 2 3 1 2 3
2 2 2 1
32 08/04/2009
POCLAIN HYDRAULICS MS hydrobases
Dimensions for Twin-Lock™ valving 37,8 kg [83 lb] 54,7 kg [120 lb]
D D
1 2 3 1 2 3
MS02 - MSE02
2 E 2 D
MSE03
MS05 - MSE05
Dimensions for 1-displacement valving with 34,4 kg [76 lb] 51,8 kg [114 lb]
built-in exchange
0,50 L [30 cu.in] 1,00 L [60 cu.in]
D F D F
1 2 3 1 2 3 1 2 3 1 2 3
1 5 R 0 8 1 4 R 0 8
MS08 - MSE08
MS11 - MSE11
08/04/2009 33
MS hydrobases POCLAIN HYDRAULICS
Exchange
When a coding request is made, you must specify information on the threshold of the selector and the valve.
Selector spool
P
bar
Selector Opening pressure of [PSI]
threshold selector
bar [PSI] bar [PSI] P2
8 [116] 9.9 ±1.2 [144 ±17]
P1
Fitted valve
P1 Q2 P2
bar [PSI] L/min [GPM] bar [PSI]
13.5 [195] 14 [3.7] 16 [232]
18 [261] 15 [3.9] 21 [305]
22 [319] 16 [4.2] 25 [363] Q2 Q
L/min [GPM]
Chassis mountings
ØM (1) ØU S Ra V Class *
253 300
Wheel motor
[9,96] [11,81] 0,2 12,5μm 2x 5 210 N.m
8,8
Shaft motor 224 300 [0,008] [0,49μin] M16 x 2 [155 lb.ft]
[8,82] [11,81]
(1) +0,3 [+0,012]
+0,2 [+0,008]
34 08/04/2009
POCLAIN HYDRAULICS MS hydrobases
Hydraulic connections
connections
MS02 - MSE02
M S 0 8
M S E 0 8 1 1 2 3 1 2 3 1 2 3 4 1 2 3 4 5 6
C D F P S
MSE03
Old Standards Power supply Case drain 2nd Control of Control of
standards displacement parking break drum break
control
R-L 1, 2 X XT
A SAE J514 ISO 11 926-1 1"1/16-12 UNF 3/4"-16 UNF 9/16"-18 UNF
ISO 6 162 ISO 6 162
1 DN13 PN400 M18x1.5 M16x1.5
DIN 3 852 ISO 9 974-1
ISO 6 162 ISO 6 162 Ø17 Ø17
MS05 - MSE05
2 DN13 PN400
BSPP ISO 1 179-1 [3/8" dia.] [3/8" dia.]
4 NF E48 050 ISO 9 974-1 M22x1.5 M18x1.5 M16x1.5
5 DIN 3 852 ISO 9 974-1 M27x2 M18x1.5 M16x1.5
8 NF E48 050 ISO 6 149-1 M22x1.5 M18x1.5 M16x1.5
R-A 1, 2 Y X
A SAE J514 ISO 11 926-1 1"1/16-12 UNF 3/4"-16 UNF 9/16"-18 UNF 9/16"-18 UNF
ISO 6 162 ISO 6 162
1 DN13 PN400 M18x1.5 M14x1.5 M16x1.5
DIN 3 852 ISO 9 974-1
5 DIN 3 852 ISO 9 974-1 M27x2 M18x1.5 M14x1.5 M16x1.5
MS08 - MSE08
R-A1-A2 1, 2 Y X
A SAE J514 ISO 11 926-1 1"1/16-12 UNF 3/4"-16 UNF 9/16"-18 UNF 9/16"-18 UNF
Ø27 Ø17 Ø13 Ø13
3 BSPP ISO 1 179-1
[3/4" dia.] [3/8" dia.] [1/4" dia.] [1/4" dia.]
5 DIN 3 852 ISO 9 974-1 M27x2 M18x1.5 M14x1.5 M16x1.5
M12x1.5
ISO 9 974-1
M14x1.5
Max. MS 450 [6 527]
pressures bar [PSI] 1 [15] 30 [435] 30 [435] 120 [1 740]
MSE 400 [5 802]
MS11 - MSE11
08/04/2009 35
MS hydrobases POCLAIN HYDRAULICS
Efficiency
MS08
MSE08
36 08/04/2009
POCLAIN HYDRAULICS MS hydrobases
OPTIONS
C D F P S
M S 0 8 1 1 2 3 1 2 3 1 2 3 4 1 2 3 4 5 6
0 0 0 0
M S E 0 8
MS02 - MSE02
You can accumulate more than one optional part. Consult your
Poclain Hydraulics sales engineer.
A-A
Designation
T4 Speed sensor installed 2
TR Speed sensor installed S
Predisposition for speed sensor 8
MSE03
MS05 - MSE05
Max. length Y = 21.1
Standard number of pulses per revolution = 60
MS08 - MSE08
connection.
08/04/2009 37
MS hydrobases POCLAIN HYDRAULICS
5 - Drainage
Fit an additional drain on the valving cover.
A
102 [4.02]
7 - Diamond™
Special treatment of the motor core which considerably increases its strength, making the motor much more tolerant to temporary instances of the
operating conditions being exceeded.
M - High speed
Under certain conditions, an increase in the maximum speed of 30% above the values indicated in the table on page 2 is possible.
T - Soft Shift™
Progressive displacement change (cushioned slide-valve)
38 08/04/2009
08/04/2009
POCLAIN HYDRAULICS
MS hydrobases
39
MS11 - MSE11 MS08 - MSE08 MS05 - MSE05 MSE03 MS02 - MSE02
MS11 - MSE11
MS hydrobases POCLAIN HYDRAULICS
CHARACTERISTICS
9
50 [67] 33 [44] 25 [34] 450 [6 527]
0 1 048 [63,9] 524 [32,0] 1 666 [847] 185
1 1 147 [70,0] 574 [35,0] 1 824 [927] 180
2 1 259 [76,8] 630 [38,4] 2 002 [1 018] 170 175
9 1 263 [77,0] 632 [38,5] 2 008 [1 021] 170 190
MSE11
629 [38,4]
MS11
843 [51,4]
MSE11
A 1 404 [85,6] 2 232 [1 135] 50 [67] 33 [44] 25 [34] 120 400 [5 802]
561 [34,2]
First displacement
Second displacement
40 08/04/2009
POCLAIN HYDRAULICS MS hydrobases
M S 1 1 1 1 2 3 1 2 3 1 2 3 4 1 2 3 4 5 6
MS02 - MSE02
M S E 1 1
Dimensions for 1-displacement valving 1 1 44 kg [97 lb] 67,5 kg [148,5 lb]
F 1 2
1 2 48,9 kg [107,6 lb] 72,4 kg [159,3 lb]
0,75 L [45 cu.in] 0,92 L [55 cu.in]
D D
1 2 3 1 2 3
1 2 1 1
MSE03
MS05 - MSE05
F12
MS08 - MSE08
B 76,7 [3,02]
C Ø247 [9,72]
D 26 [1,02]
Dimension on 2 pins ØV
MS11 - MSE11
Y
ØA Module Z Y ØV
ØA
75 [2,953] 2,5 28 65,169 [2,739] 5 [0,197]
08/04/2009 41
Dimensions for other valving systems
1 2 3 1 2 3
2 2 2 1
Dimensions for Twin-Lock™ valving 48,9 kg [107,6 lb] F 1 2 72,4 kg [159,3 lb]
1 2 3
2 E
42 08/04/2009
POCLAIN HYDRAULICS MS hydrobases
Dimensions for 1-displacement valving with 1 5 44 kg [97 lb] 67,5 kg [148,5 lb]
built-in exchange F 1 2
1 4 48,9 kg [107,6 lb] 72,4 kg [159,3 lb]
0,75 L [45 cu.in] 0,92 L [55 cu.in]
D D
1 2 3 1 2 3
MS02 - MSE02
1 5 1 4
MSE03
MS05 - MSE05
Dimensions for 2-displacement valving with 1 5 44 kg [97 lb] 67,5 kg [148,5 lb]
built-in exchange F 1 2
1 4 48,9 kg [107,6 lb] 72,4 kg [159,3 lb]
0,75 L [45 cu.in] 0,92 L [55 cu.in]
D D
1 2 3 1 2 3
2 5 2 4
MS08 - MSE08
MS11 - MSE11
F12
B 76,7 [3,02]
C Ø247 [9,72]
D 26 [1,02]
08/04/2009 43
MS hydrobases POCLAIN HYDRAULICS
Dimensions for 2-displacement valving or 48,9 kg [107,6 lb] F 1 2 72,4 kg [159,3 lb]
Twin-Lock™ valving
0,75 L [45 cu.in] 0,92 L [55 cu.in]
D
1 2 3
2 Q
Exchange
When a coding request is made, you must specify information on the threshold of the selector and the valve.
Selector spool
P
bar
Selector Opening pressure of [PSI]
threshold selector
bar [PSI] bar [PSI] P2
8 [116] 9.9 ±1.2 [144 ±17]
P1
Fitted valve
P1 Q2 P2
bar [PSI] L/min [GPM] bar [PSI]
13.5 [195] 14 [3.7] 16 [232]
18 [261] 15 [3.9] 21 [305]
22 [319] 16 [4.2] 25 [363] Q2 Q
L/min [GPM]
44 08/04/2009
POCLAIN HYDRAULICS MS hydrobases
Chassis mountings
MS02 - MSE02
Take care over the immediate environment of the connections.
MSE03
ØM ( 1) ØU S Ra V Class *
285 335
Wheel motor
[11,22] [13,19] 0,2 12,5μm 2x4 410 N.m
8,8
280 335 [0,008] [0,49μin] 4 x M20 [302 lb.ft]
Shaft motor
[11,02] [13,19]
(1) +0,3 [+0,012]
+0,2 [+0,008]
MS05 - MSE05
* : Min. values for torque and load to be transmitted.
MS08 - MSE08
MS11 - MSE11
08/04/2009 45
MS hydrobases POCLAIN HYDRAULICS
Hydraulic connections
connections
M S 1 1
M S E 1 1 1 1 2 3 1 2 3 1 2 3 4 1 2 3 4 5 6
C D F P S
DYNA+TM
Old Standards Power supply Case drain 2nd Control of Control of Control of Control of
standards displacement parking drum parking service
control break break break break
R -L 1, 2 X XT X XD
A SA E J514 IS O 11 9 2 6 - 1 1" 1/16-12 UNF 3/4" -16 UNF 9/16"-18 UNF 3/4" -16 UNF 9/16"-18 UNF
ISO 6 162 IS O 6 16 2
1 DN19 P N400 M 18x1.5 M 16x1.5 M 16x1.5 M 14x1.5
DIN 3 852 IS O 9 9 7 4 - 1
ISO 6 162 IS O 6 16 2 Ø21 Ø17
2 DN19 P N400
B SP P IS O 1 17 9 - 1 [1/2" dia.] [3/8" dia.]
Ø27 Ø21 Ø17
3 B SP P IS O 1 17 9 - 1
[3/4" dia.] [1/2" dia.] [3/8" dia.]
4 NF E48 050 IS O 9 9 7 4 - 1 M 27x2 M 18x1.5 M 16x1.5 M 16x1.5 M 14x1.5
5 DIN 3 852 IS O 9 9 7 4 - 1 M 33x2 M 18x1.5 M 16x1.5
ISO 6 162 IS O 6 16 2
7 DN19 P N400 3/4" -16 UNF 9/16"-18 UNF 3/4" -16 UNF 9/16"-18 UNF
SA E J514 IS O 11 9 2 6 - 1
R -A 1, 2 Y X X XD
A SA E J514 IS O 11 9 2 6 - 1 1" 1/16-12 UNF 3/4" -16 UNF 9/16"-18 UNF 9/16"-18 UNF 3/4" -16 UNF 9/16"-18 UNF
ISO 6 162 IS O 6 16 2
1 DN13 P N400 M 18x1.5 M 16x1.5 M 16x1.5 M 16x1.5 M 14x1.5
DIN 3 852 IS O 9 9 7 4 - 1
ISO 6 162 IS O 6 16 2 Ø21 Ø17 Ø17
2 DN13 P N400
B SP P IS O 1 17 9 - 1 [1/2" dia.] [3/8" dia.] [3/8" dia.]
Ø27 Ø21 Ø17 Ø17
3 B SP P IS O 1 17 9 - 1
[3/4" dia.] [1/2" dia.] [3/8" dia.] [3/8" dia.]
4 NF E48 050 IS O 9 9 7 4 - 1 M 27x2 M 18x1.5 M 16x1.5 M 16x1.5 M 16x1.5 M 14x1.5
R -A 1 A2 1, 2 Y X X XD
A SA E J514 IS O 11 9 2 6 - 1 1" 1/16-12 UNF 9/16"-18 UNF 3/4" -16 UNF 9/16"-18 UNF 9/16"-18 UNF 3/4" -16 UNF 9/16"-18 UNF
ISO 6 162 IS O 6 16 2
1 DN13 P N400 M 27x2 M 18x1.5 M 16x1.5 M 16x1.5 M 16x1.5 M 14x1.5
DIN 3 852 IS O 9 9 7 4 - 1
M 27x2
4 NF E48 050 IS O 9 9 7 4 - 1 M 27x2 M 18x1.5 M 16x1.5 M 16x1.5 M 16x1.5 M 14x1.5
M 22x1.5
M 10x1
IS O 9 9 7 4 - 1
M 14x1.5
Max. MS 450 [6 527] 450 [6 527]
bar [P SI] 1 [15] 30 [435] 30 [435] 120 [1740] 30 [435] 120 [1740]
pressures M SE 400 [5 802] 400 [5 802]
46 08/04/2009
POCLAIN HYDRAULICS MS hydrobases
Efficiency
MS02 - MSE02
MS11
MSE03
MSE11
MS05 - MSE05
MS08 - MSE08
The starting torque is taken to be approximately
85% of the first value for available pressure. For a
precise calculation, consult your
Poclain Hydraulics application engineer.
MS11 - MSE11
08/04/2009 47
MS hydrobases POCLAIN HYDRAULICS
OPTIONS
C D F P S
M S 1 1 1 1 2 3 1 2 3 1 2 3 4 1 2 3 4 5 6
0 0 0 0
M S E 1 1
You can accumulate more than one optional part. Consult your
Poclain Hydraulics sales engineer.
A-A
Designation
T4 Speed sensor installed 2
TR Speed sensor installed S
Predisposition for speed sensor 8
7 - Diamond™
Special treatment of the motor core which considerably increases its strength, making the motor much more tolerant to temporary instances of the
operating conditions being exceeded.
48 08/04/2009
POCLAIN HYDRAULICS MS hydrobases
E - Reinforced sealing
Requires reinforced seals and, for an unbraked motor, a rear reinforced plate (R08 - 8 [0.314]thick, instead of 4 [0.157]).
C D F P S
M S 1 1 1 1 2 3 1 2 3 1 2 3 4 1 2 3 4 5 6
R 1 1 E
M S E 1 1
MS02 - MSE02
H - High efficiency
Reinforced piston sealing to improve volumetric efficiency.
MSE03
For a precise calculation, consult your Poclain Hydraulics application engineer.
M - High speed
Under certain conditions, an increase in the maximum speed of 30% above the values indicated in the table on page 2 is possible.
MS05 - MSE05
T - Soft Shift™
Progressive displacement change (cushioned slide-valve)
MS08 - MSE08
MS11 - MSE11
08/04/2009 49
MS hydrobases POCLAIN HYDRAULICS
50 08/04/2009
08/04/2009
POCLAIN HYDRAULICS
MS hydrobases
51
MS11 - MSE11 MS08 - MSE08 MS05 - MSE05 MSE03 MS02 - MSE02
Thirteen subsidiaries and a worldwide network
of more than 150 distributors and partners …
08/04/2009
A15761G
A15762H
A15763J
A15764K
A15765L
Poclain Hydraulics reserves the right to make any modifications it deems necessary to the products described in this document
without prior notification.The information contained in this document must be confirmed by Poclain Hydraulics before any order is
submitted.
Illustrations are not binding.
The Poclain Hydraulics brand is the property of Poclain Hydraulics S.A.