Professional Documents
Culture Documents
ASTM Standards :
General Resources - Standards Partial List of ASTM Specifications
Please note that this list of ASTM specifications is provided for general reference only and may not be
complete or current. Reference to the release date of the specification has been intentionally left off so
that this list will not be used to check for the latest version of the document. Information provided by
ASTM International should be consulted to ensure accuracy. ASTM web site can be found at www.astm.org
D 5339, Standard Practice for Quality Assurance Plan for Structural Steel Fabrication for Highway
Structures.
D 5641, Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber.
D 5820, Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes.
D 5858, Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using
Layered Elastic Theory.
D 6087, Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground
Penetrating Radar.
D 6365, Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Tests.
E 94, Standard Guide for Radiographic Examination.
E 114, Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method.
E 125, Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings.
Page 40 of 45
RADIANT NDT TRAINING INSTITUTE UT FORMULA
E 127, Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference
Blocks.
E 142, Standard Method for Controlling Quality of Radiographic Testing.
E 155, Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings.
E 164, Standard Practice for Ultrasonic Contact Examination of Weldments.
E 165, Standard Test Method for Liquid Penetrant Examination.
E 186, Standard Reference Radiographs for Heavy-Walled (2 to 4 1/2-in. (51 to 114-mm)) Steel Castings.
E 192, Standard Reference Radiographs for Investment Steel Castings of Aerospace Applications.
E 213, Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing.
E 214, Standard Practice for Immersed Ultrasonic Examination by the Reflection Method Using Pulsed
Longitudinal Waves.
E 215, Standard Practice for Standardizing Equipment for Electromagnetic Examination of Seamless
Aluminum-Alloy Tube.
E 242, Standard Reference Radiographs for Appearances of Radiographic Images as Certain
Parameters Are Changed.
E 243, Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper and
Copper-Alloy Tubes.
E272, Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy
Castings.
E 273, Standard Practice for Ultrasonic Examination of the Weld Zone of Welded Pipe and Tubing.
E 280, Standard Reference Radiographs for Heavy-Walled (4 1/2 to 12-in. (114 to 305-mm)) Steel
Castings.
E 309, Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic
Saturation.
E 310, Standard Reference Radiographs for Tin Bronze Castings.
E 317, Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse- Echo
Examination Instruments and Systems Without the Use of Electronic Measurement Instruments.
E 329, Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials
Used in Construction.
E 376, Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current
(Electromagnetic) Test Methods.
E 1324, Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Examination
Instruments.
E 1359, Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies.
E 1390, Standard Guide for Illuminators Used for Viewing Industrial Radiographs. E 1411, Standard
Practice for Qualification of Radioscopic Systems.
E 1416, Standard Test Method for Radioscopic Examination of Weldments.
E 1417, Standard Practice for Liquid Penetrant Examination.
E 1418, Standard Test Method for Visible Penetrant Examination Using the Water-Washable Process.
E 1419, Standard Test Method for Examination of Seamless, GasFilled, Pressure Vessels Using
Acoustic Emission.
E 1441, Standard Guide for Computed Tomography (CT) Imaging.
E 1444, Standard Practice for Magnetic Particle Examination.
E 1452, Standard Practice for Preparation of Calibration Solutions for Spectrophotometric and for
Spectroscopic Atomic Analysis.
E 1453, Standard Guide for Storage of Media That Contains Analog or Digital Radioscopic Data.
E 1454, Standard Guide for Data Fields for Computerized Transfer of Digital Ultrasonic Testing Data
E 1475, Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Test Data.
E 1476, Standard Guide for Metals Identification, Grade Verification, and Sorting.
E 1495, Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded
Joints.
E 1496, Standard Test Method for Neutron Radiographic Dimensional Measurements.
E 1543, Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems.
Page 43 of 45
RADIANT NDT TRAINING INSTITUTE UT FORMULA
E 1570, Standard Practice for Computed Tomographic (CT) Examination.
E 1571, Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope.
E 1603, Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector
or Residual Gas Analyzer in the Hood Mode.
E 1606, Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for
Electrical Purposes.
E 1629, Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes.
E 1647, Standard Practice for Determining Contrast Sensitivity in Radioscopy.
E 1648, Standard Reference Radiographs for Examination of Aluminum Fusion Welds.
E 1672, Standard Guide for Computed Tomography (CT) System Selection.
E 1695, Standard Test Method for Measurement of Computed Tomography (CT) System Performance.
E 1734, Standard Practice for Radioscopic Examination of Castings.
E 1735, Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film
Exposed to X-Radiation from 4 to 25 MV.
E 1736, Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels.
E 1742, Standard Practice for Radiographic Examination.
E 1774, Standard Guide for Electromagnetic Acoustic Transducers (EMATs).
E 1781, Standard Practice for Secondary Calibration of Acoustic Emission Sensors.
E 1814, Standard Practice for Computed Tomographic (CT) Examination of Castings.
E 1815, Standard Test Method for Classification of Film Systems for Industrial Radiography.
E 1816, Standard Practice for Ultrasonic Examinations Using Electromagnetic Acoustic Transducer
(EMAT) Techniques.
E 1817, Standard Practice for Controlling Quality of Radiological Examination by Using Representative
Quality Indicators (RQIs)
E 1862-97(2002)e1 Standard Test Methods for Measuring and Compensating for Reflected Temperature
Using Infrared Imaging Radiometers.
E 1888, Standard Test Method for Acoustic Emission testing of Pressurized Containers Made of
Fiberglass Reinforced Plastic with Balsa Wood Cores.
E 1897, Standard Test Methods for Measuring and Compensating for Transmittance of an Attenuating
Medium Using Infrared Imaging.
E 1901, Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-
Beam Ultrasonic Methods.
E 1930, Standard Test Method for Examination of Liquid Filled Atmospheric and Low Pressure Metal
Storage Tanks Using Acoustic Emission.
E 1931, Standard Guide for X-Ray Compton Scatter Tomography.
E 1932, Standard Guide for Acoustic Emission Examination of Small Parts.
E 1933, Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging
Radiometers.
E 1934, Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography.
E 1935, Standard Test Method for Calibrating and Meausring CT Density.
E 1936, Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization
Systems.
E 1955, Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded
ASTM E 390 Reference Radiographs.
E 1961, Standard Practice for Mechanized Ultrasonic Examination of Girth Welds Using Zonal
Discrimination with Focused Search Units.
E1962, Standard Test Method for Ultrasonic Surface Examinations Using Electromagnetic Acoustic
Transducer (EMAT) Techniques.
E 2001, Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and
Non-Metallic Parts.
E 2002, Standard Practice for Determining Total Image Unsharpness in Radiology.
E 2003, Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators.
E 2023, Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators.
E 2024, Standard Test Methods for Atmospheric Leaks Using a Thermal Conductivity Leak Detector.
Page 44 of 45
RADIANT NDT TRAINING INSTITUTE UT FORMULA
E 2033, Standard Practice for Computed Radiology (Photostimulable Luminescence Method).
E 2075, Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod.
E 2076, Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using
Acoustic Emission.
E 2096, Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using
Remote Field Testing.
E 2104, Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials
and Components.
E 2191, Standard Test Method for Examination of Gas-Filled Filament-Wound Composite Pressure
Vessels Using Acoustic Emission.
E 2192, Standard Guide for Planar Flaw Height Sizing by Ultrasonics.
E 2223, Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using
Angle Beam Ultrasonic.
F 629, Standard Practice for Radiography of Cast Metallic Surgical Implants.
F 846, Standard Guide for Testing Performance of Amusement Rides and Devices.
F 914, Standard Test Method for Acoustic Emission for Insulated Aerial Personnel Devices.
F 1430, Standard Test Method for Acoustic Emission Testing of Insulated Aerial Personnel Devices
with Supplemental Load Handling Attachments
F 1469, Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment
for Nondestructive Testing.
F 1512, Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate
Assemblies.
F 1797, Standard Test Method for Acoustic Emission Testing of Insulated Digger Derricks.
G 62, Standard Test Methods for Holiday Detection in Pipeline Coatings.
G 158, Standard Guide for Three Methods of Assessing Buried Steel Tanks. R0027- Standards
Related to Nondestructive Testing Developed by ASTM Committees Other Than Committee
E-7 (This is not an ASTM standard)
Page 45 of 45
RADIANT NDT TRAINING INSTITUTE UT FORMULA
ASTM Standards :
General Resources - Standards Partial List of ASTM Specifications
Please note that this list of ASTM specifications is provided for general reference only and may not be
complete or current. Reference to the release date of the specification has been intentionally left off so
that this list will not be used to check for the latest version of the document. Information provided by
ASTM International should be consulted to ensure accuracy. ASTM web site can be found at www.astm.org
D 5339, Standard Practice for Quality Assurance Plan for Structural Steel Fabrication for Highway
Structures.
D 5641, Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber.
D 5820, Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes.
D 5858, Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using
Layered Elastic Theory.
D 6087, Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground
Penetrating Radar.
D 6365, Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Tests.
E 94, Standard Guide for Radiographic Examination.
E 114, Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method.
E 125, Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings.
Page 40 of 45
RADIANT NDT TRAINING INSTITUTE UT FORMULA
E 127, Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference
Blocks.
E 142, Standard Method for Controlling Quality of Radiographic Testing.
E 155, Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings.
E 164, Standard Practice for Ultrasonic Contact Examination of Weldments.
E 165, Standard Test Method for Liquid Penetrant Examination.
E 186, Standard Reference Radiographs for Heavy-Walled (2 to 4 1/2-in. (51 to 114-mm)) Steel Castings.
E 192, Standard Reference Radiographs for Investment Steel Castings of Aerospace Applications.
E 213, Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing.
E 214, Standard Practice for Immersed Ultrasonic Examination by the Reflection Method Using Pulsed
Longitudinal Waves.
E 215, Standard Practice for Standardizing Equipment for Electromagnetic Examination of Seamless
Aluminum-Alloy Tube.
E 242, Standard Reference Radiographs for Appearances of Radiographic Images as Certain
Parameters Are Changed.
E 243, Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper and
Copper-Alloy Tubes.
E272, Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy
Castings.
E 273, Standard Practice for Ultrasonic Examination of the Weld Zone of Welded Pipe and Tubing.
E 280, Standard Reference Radiographs for Heavy-Walled (4 1/2 to 12-in. (114 to 305-mm)) Steel
Castings.
E 309, Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic
Saturation.
E 310, Standard Reference Radiographs for Tin Bronze Castings.
E 317, Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse- Echo
Examination Instruments and Systems Without the Use of Electronic Measurement Instruments.
E 329, Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials
Used in Construction.
E 376, Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current
(Electromagnetic) Test Methods.
E 1324, Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Examination
Instruments.
E 1359, Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies.
E 1390, Standard Guide for Illuminators Used for Viewing Industrial Radiographs. E 1411, Standard
Practice for Qualification of Radioscopic Systems.
E 1416, Standard Test Method for Radioscopic Examination of Weldments.
E 1417, Standard Practice for Liquid Penetrant Examination.
E 1418, Standard Test Method for Visible Penetrant Examination Using the Water-Washable Process.
E 1419, Standard Test Method for Examination of Seamless, GasFilled, Pressure Vessels Using
Acoustic Emission.
E 1441, Standard Guide for Computed Tomography (CT) Imaging.
E 1444, Standard Practice for Magnetic Particle Examination.
E 1452, Standard Practice for Preparation of Calibration Solutions for Spectrophotometric and for
Spectroscopic Atomic Analysis.
E 1453, Standard Guide for Storage of Media That Contains Analog or Digital Radioscopic Data.
E 1454, Standard Guide for Data Fields for Computerized Transfer of Digital Ultrasonic Testing Data
E 1475, Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Test Data.
E 1476, Standard Guide for Metals Identification, Grade Verification, and Sorting.
E 1495, Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded
Joints.
E 1496, Standard Test Method for Neutron Radiographic Dimensional Measurements.
E 1543, Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems.
Page 43 of 45
RADIANT NDT TRAINING INSTITUTE UT FORMULA
E 1570, Standard Practice for Computed Tomographic (CT) Examination.
E 1571, Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope.
E 1603, Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector
or Residual Gas Analyzer in the Hood Mode.
E 1606, Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for
Electrical Purposes.
E 1629, Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes.
E 1647, Standard Practice for Determining Contrast Sensitivity in Radioscopy.
E 1648, Standard Reference Radiographs for Examination of Aluminum Fusion Welds.
E 1672, Standard Guide for Computed Tomography (CT) System Selection.
E 1695, Standard Test Method for Measurement of Computed Tomography (CT) System Performance.
E 1734, Standard Practice for Radioscopic Examination of Castings.
E 1735, Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film
Exposed to X-Radiation from 4 to 25 MV.
E 1736, Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels.
E 1742, Standard Practice for Radiographic Examination.
E 1774, Standard Guide for Electromagnetic Acoustic Transducers (EMATs).
E 1781, Standard Practice for Secondary Calibration of Acoustic Emission Sensors.
E 1814, Standard Practice for Computed Tomographic (CT) Examination of Castings.
E 1815, Standard Test Method for Classification of Film Systems for Industrial Radiography.
E 1816, Standard Practice for Ultrasonic Examinations Using Electromagnetic Acoustic Transducer
(EMAT) Techniques.
E 1817, Standard Practice for Controlling Quality of Radiological Examination by Using Representative
Quality Indicators (RQIs)
E 1862-97(2002)e1 Standard Test Methods for Measuring and Compensating for Reflected Temperature
Using Infrared Imaging Radiometers.
E 1888, Standard Test Method for Acoustic Emission testing of Pressurized Containers Made of
Fiberglass Reinforced Plastic with Balsa Wood Cores.
E 1897, Standard Test Methods for Measuring and Compensating for Transmittance of an Attenuating
Medium Using Infrared Imaging.
E 1901, Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-
Beam Ultrasonic Methods.
E 1930, Standard Test Method for Examination of Liquid Filled Atmospheric and Low Pressure Metal
Storage Tanks Using Acoustic Emission.
E 1931, Standard Guide for X-Ray Compton Scatter Tomography.
E 1932, Standard Guide for Acoustic Emission Examination of Small Parts.
E 1933, Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging
Radiometers.
E 1934, Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography.
E 1935, Standard Test Method for Calibrating and Meausring CT Density.
E 1936, Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization
Systems.
E 1955, Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded
ASTM E 390 Reference Radiographs.
E 1961, Standard Practice for Mechanized Ultrasonic Examination of Girth Welds Using Zonal
Discrimination with Focused Search Units.
E1962, Standard Test Method for Ultrasonic Surface Examinations Using Electromagnetic Acoustic
Transducer (EMAT) Techniques.
E 2001, Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and
Non-Metallic Parts.
E 2002, Standard Practice for Determining Total Image Unsharpness in Radiology.
E 2003, Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators.
E 2023, Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators.
E 2024, Standard Test Methods for Atmospheric Leaks Using a Thermal Conductivity Leak Detector.
Page 44 of 45
RADIANT NDT TRAINING INSTITUTE UT FORMULA
E 2033, Standard Practice for Computed Radiology (Photostimulable Luminescence Method).
E 2075, Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod.
E 2076, Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using
Acoustic Emission.
E 2096, Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using
Remote Field Testing.
E 2104, Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials
and Components.
E 2191, Standard Test Method for Examination of Gas-Filled Filament-Wound Composite Pressure
Vessels Using Acoustic Emission.
E 2192, Standard Guide for Planar Flaw Height Sizing by Ultrasonics.
E 2223, Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using
Angle Beam Ultrasonic.
F 629, Standard Practice for Radiography of Cast Metallic Surgical Implants.
F 846, Standard Guide for Testing Performance of Amusement Rides and Devices.
F 914, Standard Test Method for Acoustic Emission for Insulated Aerial Personnel Devices.
F 1430, Standard Test Method for Acoustic Emission Testing of Insulated Aerial Personnel Devices
with Supplemental Load Handling Attachments
F 1469, Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment
for Nondestructive Testing.
F 1512, Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate
Assemblies.
F 1797, Standard Test Method for Acoustic Emission Testing of Insulated Digger Derricks.
G 62, Standard Test Methods for Holiday Detection in Pipeline Coatings.
G 158, Standard Guide for Three Methods of Assessing Buried Steel Tanks. R0027- Standards
Related to Nondestructive Testing Developed by ASTM Committees Other Than Committee
E-7 (This is not an ASTM standard)
Page 45 of 45
RADIANT NDT TRAINING INSTITUTE UT FORMULA
ASTM Standards :
General Resources - Standards Partial List of ASTM Specifications
Please note that this list of ASTM specifications is provided for general reference only and may not be
complete or current. Reference to the release date of the specification has been intentionally left off so
that this list will not be used to check for the latest version of the document. Information provided by
ASTM International should be consulted to ensure accuracy. ASTM web site can be found at www.astm.org
D 5339, Standard Practice for Quality Assurance Plan for Structural Steel Fabrication for Highway
Structures.
D 5641, Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber.
D 5820, Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes.
D 5858, Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using
Layered Elastic Theory.
D 6087, Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground
Penetrating Radar.
D 6365, Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Tests.
E 94, Standard Guide for Radiographic Examination.
E 114, Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method.
E 125, Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings.
Page 40 of 45
RADIANT NDT TRAINING INSTITUTE UT FORMULA
E 127, Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference
Blocks.
E 142, Standard Method for Controlling Quality of Radiographic Testing.
E 155, Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings.
E 164, Standard Practice for Ultrasonic Contact Examination of Weldments.
E 165, Standard Test Method for Liquid Penetrant Examination.
E 186, Standard Reference Radiographs for Heavy-Walled (2 to 4 1/2-in. (51 to 114-mm)) Steel Castings.
E 192, Standard Reference Radiographs for Investment Steel Castings of Aerospace Applications.
E 213, Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing.
E 214, Standard Practice for Immersed Ultrasonic Examination by the Reflection Method Using Pulsed
Longitudinal Waves.
E 215, Standard Practice for Standardizing Equipment for Electromagnetic Examination of Seamless
Aluminum-Alloy Tube.
E 242, Standard Reference Radiographs for Appearances of Radiographic Images as Certain
Parameters Are Changed.
E 243, Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper and
Copper-Alloy Tubes.
E272, Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy
Castings.
E 273, Standard Practice for Ultrasonic Examination of the Weld Zone of Welded Pipe and Tubing.
E 280, Standard Reference Radiographs for Heavy-Walled (4 1/2 to 12-in. (114 to 305-mm)) Steel
Castings.
E 309, Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic
Saturation.
E 310, Standard Reference Radiographs for Tin Bronze Castings.
E 317, Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse- Echo
Examination Instruments and Systems Without the Use of Electronic Measurement Instruments.
E 329, Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials
Used in Construction.
E 376, Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current
(Electromagnetic) Test Methods.
E 1324, Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Examination
Instruments.
E 1359, Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies.
E 1390, Standard Guide for Illuminators Used for Viewing Industrial Radiographs. E 1411, Standard
Practice for Qualification of Radioscopic Systems.
E 1416, Standard Test Method for Radioscopic Examination of Weldments.
E 1417, Standard Practice for Liquid Penetrant Examination.
E 1418, Standard Test Method for Visible Penetrant Examination Using the Water-Washable Process.
E 1419, Standard Test Method for Examination of Seamless, GasFilled, Pressure Vessels Using
Acoustic Emission.
E 1441, Standard Guide for Computed Tomography (CT) Imaging.
E 1444, Standard Practice for Magnetic Particle Examination.
E 1452, Standard Practice for Preparation of Calibration Solutions for Spectrophotometric and for
Spectroscopic Atomic Analysis.
E 1453, Standard Guide for Storage of Media That Contains Analog or Digital Radioscopic Data.
E 1454, Standard Guide for Data Fields for Computerized Transfer of Digital Ultrasonic Testing Data
E 1475, Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Test Data.
E 1476, Standard Guide for Metals Identification, Grade Verification, and Sorting.
E 1495, Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded
Joints.
E 1496, Standard Test Method for Neutron Radiographic Dimensional Measurements.
E 1543, Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems.
Page 43 of 45
RADIANT NDT TRAINING INSTITUTE UT FORMULA
E 1570, Standard Practice for Computed Tomographic (CT) Examination.
E 1571, Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope.
E 1603, Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector
or Residual Gas Analyzer in the Hood Mode.
E 1606, Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for
Electrical Purposes.
E 1629, Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes.
E 1647, Standard Practice for Determining Contrast Sensitivity in Radioscopy.
E 1648, Standard Reference Radiographs for Examination of Aluminum Fusion Welds.
E 1672, Standard Guide for Computed Tomography (CT) System Selection.
E 1695, Standard Test Method for Measurement of Computed Tomography (CT) System Performance.
E 1734, Standard Practice for Radioscopic Examination of Castings.
E 1735, Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film
Exposed to X-Radiation from 4 to 25 MV.
E 1736, Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels.
E 1742, Standard Practice for Radiographic Examination.
E 1774, Standard Guide for Electromagnetic Acoustic Transducers (EMATs).
E 1781, Standard Practice for Secondary Calibration of Acoustic Emission Sensors.
E 1814, Standard Practice for Computed Tomographic (CT) Examination of Castings.
E 1815, Standard Test Method for Classification of Film Systems for Industrial Radiography.
E 1816, Standard Practice for Ultrasonic Examinations Using Electromagnetic Acoustic Transducer
(EMAT) Techniques.
E 1817, Standard Practice for Controlling Quality of Radiological Examination by Using Representative
Quality Indicators (RQIs)
E 1862-97(2002)e1 Standard Test Methods for Measuring and Compensating for Reflected Temperature
Using Infrared Imaging Radiometers.
E 1888, Standard Test Method for Acoustic Emission testing of Pressurized Containers Made of
Fiberglass Reinforced Plastic with Balsa Wood Cores.
E 1897, Standard Test Methods for Measuring and Compensating for Transmittance of an Attenuating
Medium Using Infrared Imaging.
E 1901, Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-
Beam Ultrasonic Methods.
E 1930, Standard Test Method for Examination of Liquid Filled Atmospheric and Low Pressure Metal
Storage Tanks Using Acoustic Emission.
E 1931, Standard Guide for X-Ray Compton Scatter Tomography.
E 1932, Standard Guide for Acoustic Emission Examination of Small Parts.
E 1933, Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging
Radiometers.
E 1934, Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography.
E 1935, Standard Test Method for Calibrating and Meausring CT Density.
E 1936, Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization
Systems.
E 1955, Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded
ASTM E 390 Reference Radiographs.
E 1961, Standard Practice for Mechanized Ultrasonic Examination of Girth Welds Using Zonal
Discrimination with Focused Search Units.
E1962, Standard Test Method for Ultrasonic Surface Examinations Using Electromagnetic Acoustic
Transducer (EMAT) Techniques.
E 2001, Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and
Non-Metallic Parts.
E 2002, Standard Practice for Determining Total Image Unsharpness in Radiology.
E 2003, Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators.
E 2023, Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators.
E 2024, Standard Test Methods for Atmospheric Leaks Using a Thermal Conductivity Leak Detector.
Page 44 of 45
RADIANT NDT TRAINING INSTITUTE UT FORMULA
E 2033, Standard Practice for Computed Radiology (Photostimulable Luminescence Method).
E 2075, Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod.
E 2076, Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using
Acoustic Emission.
E 2096, Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using
Remote Field Testing.
E 2104, Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials
and Components.
E 2191, Standard Test Method for Examination of Gas-Filled Filament-Wound Composite Pressure
Vessels Using Acoustic Emission.
E 2192, Standard Guide for Planar Flaw Height Sizing by Ultrasonics.
E 2223, Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using
Angle Beam Ultrasonic.
F 629, Standard Practice for Radiography of Cast Metallic Surgical Implants.
F 846, Standard Guide for Testing Performance of Amusement Rides and Devices.
F 914, Standard Test Method for Acoustic Emission for Insulated Aerial Personnel Devices.
F 1430, Standard Test Method for Acoustic Emission Testing of Insulated Aerial Personnel Devices
with Supplemental Load Handling Attachments
F 1469, Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment
for Nondestructive Testing.
F 1512, Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate
Assemblies.
F 1797, Standard Test Method for Acoustic Emission Testing of Insulated Digger Derricks.
G 62, Standard Test Methods for Holiday Detection in Pipeline Coatings.
G 158, Standard Guide for Three Methods of Assessing Buried Steel Tanks. R0027- Standards
Related to Nondestructive Testing Developed by ASTM Committees Other Than Committee
E-7 (This is not an ASTM standard)
Page 45 of 45