Professional Documents
Culture Documents
P2-P3 Series Piston Pumps - Parker PDF
P2-P3 Series Piston Pumps - Parker PDF
Contents
General Information.......................................................................................................................................3
Series P2 Ordering Information.....................................................................................................................4
Series P3 Ordering Information.....................................................................................................................5
P2/P3 Technical Data....................................................................................................................................6
P2/P3 Performance Data.............................................................................................................................12
P2 Performance and Dimension Section.....................................................................................................13
Performance Data.................................................................................................................................14
Dimensional Data.................................................................................................................................23
P3 Performance and Dimension Section.....................................................................................................41
Performance Data.................................................................................................................................42
Dimensional Data.................................................................................................................................51
P2/P3 Operating and Installation.................................................................................................................62
Offer of Sale................................................................................................................................................63
The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance,
maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow
the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is
responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.
OFFER OF SALE
The items described in this document are hereby offered for sale by Parker-Hannifin Corporation, its subsidiaries or its authorized distributor. This offer and its acceptance
are governed by the provisions stated in the detailed "Offer of Sale" elsewhere in this document.
P2
Pump Displace- Rotation Shaft Mounting Controls Seals Torque Thru- Port Multiple Paint
Series ment Percent Flange Pressure Control Drive Location Pumps Option
of Max Setting Differential Setting
Displacement Pressure
Setting
Displacement,
Code
cm3/rev (in3/rev)
060 60 (3.7) Code Seal Type Code Paint Option
075 75 (4.6) Nitrile, single P Parker Black
N
105 105 (6.4) shaft seal U No Paint
145 145 (8.8) Nitrile, double
D shaft seal Code Multiple Pump Option
– “wet flange” 1 Single Pump
Code Rotation* Fluorocarbon, 2 Front Pump of Multiple Pumps
V single shaft
R Right (CW) seal 3 Middle Pump of Multiple Pumps
L Left (CCW) Fluorocarbon, 4 Rear Pump of Multiple Pumps
* Viewed from shaft end. double shaft
T
seal – “wet Code Port Location
Code Percent of Max. Displacement flange”
A Side Flanges, UNC
00 100% Stroke, standard factory setting
B Side Flanges, ISO 6149 (Metric)
XX Range is 70-99 (70% to 99%)
G* Rear Flanges, UNC
H* Rear Flanges, ISO 6149 (Metric)
Shaft Option * Available on P2060 only.
Code
Type 060 075 105 145
Code Thru-drive
B1 SAE B Spline(1) x
S1 No Thru-drive
B2 SAE BB Spline x
T1 Thru-drive with Cover
C1 SAE C Spline x x x x
A1 SAE A – 2-Bolt with SAE A Spline
C2 SAE CC Spline (2)
x x
B1 SAE B – 2-Bolt with SAE B Spline
C3 SAE C Spline (2)
x x x
B2 SAE B – 2-Bolt with SAE BB Spline
C5 SAE C Key x x x x
C2 SAE C – 2-Bolt with SAE CC Spline (145 only)
C6 SAE CC Key (2)
x x x
C3 SAE C – 4-Bolt with SAE C Spline
D1 SAE D Spline x x
C4 SAE C – 4-Bolt with SAE CC Spline (145 only)
D3 SAE D Key x
D3 SAE D – 4-Bolt with SAE D Spline (145 only)
(1)
060 non thru-drive only (2)
075 thru-drive version only
B
2-Bolt
Code Differential Pressure Setting
SAE C SAE C SAE C SAE C
C 20 Recommended Initial Factory Setting
4-Bolt 2/4-Bolt 2/4-Bolt 2-Bolt
SAE D 00 Use with PA Control only
D
4-Bolt XX Factory set in bar – Range 10-35
Code Pressure Compensator Setting P2 Torque Control Options TA, TB, TC, TD Ordering Guide
XX Factory set in bar times 10; Range 100-320 Maximum TA/TB Adj. Range TC/TD Adj. Range,
For example, 32 = 320 bar setting Rated 20%-60% 50%-90%
Model Torque of Max Torque of Max Torque
PA Std. max pressure control (Pmax), 100-320 bar (1450-4600 PSI) P2060 339 3004 68-204 600-1802 170-306 1502-2703
LA Load sensing (2 spool)/Pmax without bleed orifice P2075 424 3755 85-254 751-2253 212-382 1877-3379
LB Load sensing (2 spool)/Pmax with bleed orifice P2105 594 5257 119-356 1051-3154 297-535 2628-4731
TA (3)
Torque/LS/Pmax without bleed orifice, Torque range 20-60% of max P2145 820 7259 164-492 1451-4355 410-738 3629-6533
TB(3) Torque/LS/Pmax with bleed orifice, Torque range 20-60% of max The input torque limit is factory set at a percentage of the maximum rated input
torque. The percentage needs to be specified in Torque Control Setting (%) box
TC(3) Torque/LS/Pmax without bleed orifice, Torque range 50-90% of max of the ordering code. For example, for a P2075-TC pump with an input torque
TD(3) Torque/LS/Pmax with bleed orifice, Torque range 50-90% of max limit setting required of 300 Nm, divide 300 into 424, which equals 71%, so 71 is
specified in Torque Control Setting (%) box.
(3)
See table at left for information and example.
(4)
For Remote Pressure Compensator, order the “PA” model and remove plug from “X” port.
= Not Available
P3
Rotation
Pump Displace- Shaft Mounting Pressure Controls Differential Seals Torque Thru- Port Multiple Paint
Series ment Percant Flange Setting Pressure Control Drive Location Pumps Option
of Max Setting Setting
Displacement
Displacement,
Code
cm3/rev (in3/rev)
075 75 (4.6) Code Seal Type Code Paint Option
105 105 (6.4) Nitrile, single P Parker Black
N
145 145 (8.8) shaft seal U No Paint
Nitrile, double
D shaft seal
– “wet flange” Code Multiple Pump Option
Code Rotation* 1 Single Pump
Fluorocarbon,
R Right (CW) V single shaft 2 Front Pump of Multiple Pumps
L Left (CCW) seal 3 Middle Pump of Multiple Pumps
* Viewed from shaft end. Fluorocarbon, 4 Rear Pump of Multiple Pumps
double shaft
T
seal – “wet
Code Percent of Max. Displacement
flange” Code Port Location
100% Stroke, standard factory
00 A Side Flanges, UNC
setting
XX Range is 70-99 (70% to 99%) B Side Flanges, ISO 6149 (Metric)
= Not Available
Technical Data
P2 Series P3 Series
Frame size P2060 P2075 P2105 P2145 P3075 P3105 P3145
Max displacement cm³/rev 60 75 105 145 75 105 145
[cu in/rev] 3.66 4.58 6.41 8.85 4.58 6.41 8.85
Self-priming speed at 1 bar/14.5 psi abs.
2800 2500 2300 2200 3000 2600 2500
inlet pressure [rpm]
Max continuous pressure bar 320 320 320 320 320 320 320
[psi] 4600 4600 4600 4600 4600 4600 4600
Peak pressure bar 370 370 370 370 370 370 370
[psi] 5365 5365 5365 5365 5365 5365 5365
Minimum Inlet Pressure bar abs .8 .8 .8 .8 .8 .8 .8
at max speed [in Hg vacuum] 5.8 5.8 5.8 5.8 5.8 5.8 5.8
Maximum Inlet Pressure bar 10 10 10 10 1.5 1.5 1.5
[psi] 145 145 145 145 22.7 22.7 22.7
Maximum Case Drain Pressure bar .5 .5 .5 .5 1 1 1
continuous psi 7.75 7.75 7.75 7.75 14.5 14.5 14.5
Noise level at full flow, 1800 rpm,
and 250 bar (3600 psi) [dbA] 74 76 78 80 76 78 80
Weight with load sense control kg 37 44 63 78 42 62 76
[lbs] 81 97 139 172 92 136 167
Mass moment of inertia kg m2 .0061 .0101 .0168 .0241 .00106 .0177 .0264
(about axis of shaft)
Pressure Condition
Stand by to 250 bar to 50 bar to Stand by 300 bar to
250 bar stand by stand by to 300 bar stand by
Flow Condition
TA (ms) TR (ms) TR (ms) TA (ms) TR (ms)
Size 0-100% 100%-0 100%-0 0-100% 100%-0
P2060 60 35 35 70 40
P2075 80 35 35 70 40
P2105 100 35 35 80 40
P2145 120 35 35 100 40
P3075 80 35 35 70 35
P3105 100 35 35 80 35
P3145 110 35 35 100 35
20
15
10
0
0 5 10 15 20 25 30 35 40
Differential Setting (bar)
OUT
OUT
IN
IN
OUT OUT
IN IN
Bleed orifice
("LB" control only)
OUT OUT
IN
IN
Control Options
“TA”, “TB”, “TC” and “TD”
Torque limiting control with load sensing
and maximum pressure limiter Q
OUT OUT
IN
IN
Ripple Chamber
30
(435)
20
(290)
10
(145)
Speed (RPM)
The chart above refers to the “Ripple Chamber” technology that has been engi-
neered into the P2 and P3 series pumps. The ripple chamber reduces pressure
pulsation “ripple” at the outlet of the pump. This technology reduces the ripple by
40–60%. This leads to a significant reduction in overall system noise without
additional components or cost.
The ripple chamber is standard on all P2 and P3 series side ported pumps.
P2 Performance and
Dimension Section
113 113
(30) (30)
95 95
(25) (25)
80%
76
60%
57 57
(15) 60% (15) 50%
50%
30% 38
38 20% (10)
(10) 40%
14
14 (5)
(5)
0
0 0 70 140 210 275 345
0 70 140 210 275 345 (1000) (2000) (3000) (4000) (5000)
(1000) (2000) (3000) (4000) (5000)
Pressure Bar (PSI) Pressure Bar (PSI)
133 133
(35) (35)
113 113
(30) (30)
80%
95 95
(25) (25) 70%
Flow l/min (GPM)
76
(20) 76 60%
(20)
57 50%
(15) 57
60% (15)
38 50%
40% 38
(10)
(10)
14 30%
(5) 14
20%
(5)
0
0 70 140 210 275 345 0
(1000) (2000) (3000) (4000) (5000) 0 70 140 210 275 345
(1000) (2000) (3000) (4000) (5000)
Pressure Bar (PSI)
Pressure Bar (PSI)
189 189
(50) (50)
151 151
(40) (40)
80%
Flow l/min (GPM)
60%
76 76
60% (20)
(20)
50% 50%
0
0 0 70 140 210 275 345
0 70 140 210 275 345 (1000) (2000) (3000) (4000) (5000)
(1000) (2000) (3000) (4000) (5000)
Pressure Bar (PSI) Pressure Bar (PSI)
265 265
(70) (70)
227 227
(60) (60)
189 189
(50) (50) 80%
Flow l/min (GPM)
85 85
2500 RPM
Noise d(B)A
80 80
Noise d(B)A
2500 RPM
75 75
1500 RPM
1500 RPM
70 70
65 65
0 70 140 210 275 320 0 70 140 210 275 320
(1000) (2000) (3000) (4000) (4600) (1000) (2000) (3000) (4000) (4600)
85 85
2300 RPM
2200 RPM
Noise d(B)A
80 80
Noise (dBA)
75 75
70 70
65 65
0 70 140 210 275 320 0 70 140 210 275 320
(1000) (2000) (3000) (4000) (4600) (1000) (2000) (3000) (4000) (4600)
Pressure Bar (PSI) Pressure Bar (PSI)
P2060 Input Power - Full Stroke P2075 Input Power - Full Stroke
100 120
(134) 2800 RPM (161)
90 2500 RPM
(121) 2500 RPM
100
80 (134)
(107)
70
(94) 80
(107) 1800 RPM
1800 RPM
60
kW (HP)
kW (HP)
(80)
1500 RPM
1500 RPM
50 60
(67) (80)
1200 RPM
1200 RPM
40
(54) 1000 RPM 1000 RPM
40
30 (54)
(40)
600 RPM 600 RPM
20
(27) 20
(27)
10
(13)
0 0
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350
(725) (1450) (2175) (2900) (3625) (4350) (5075) (725) (1450) (2175) (2900) (3625) (4350) (5075)
Pressure Bar (PSI)
Pressure Bar (PSI)
P2105 Input Power - Full Stroke P2145 Input Power - Full Stroke
160 200
(215) (268)
180 2200 RPM
140 2300 RPM (241)
(188)
160
(215)
120 1800 RPM
(161) 140
1800 RPM (188)
100 1500 RPM
(134) 120
kW (HP)
kW (HP)
0 0
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350
(725) (1450) (2175) (2900) (3625) (4350) (5075) (725) (1450) (2175) (2900) (3625) (4350) (5075)
P2060 Input Power - Zero Stroke P2075 Input Power - Zero Stroke
14 16
(19) 2800 rpm (21)
14 2500 rpm
12 2500 rpm (19)
(17)
12
10 (17)
(13)
1800 rpm 10
(13)
kW (HP)
kW (HP)
8
(11) 1500 rpm
8
1200 rpm (11) 1800 rpm
6
(8) 1000 rpm 1500 rpm
6
(8) 1200 rpm
4 1000 rpm
(5) 600 rpm 4
(5) 600 rpm
2
(3) 2
(3)
0 0
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350
(725) (1450) (2175) (2900) (3625) (4350) (5075) (725) (1450) (2175) (2900) (3625) (4350) (5075)
P2105 Input Power - Zero Stroke P2145 Input Power - Zero Stroke
16 25
(21) (36)
2300 rpm
14
(19)
20 2200 rpm
(27)
12
(17) 1800 rpm
10 1800 rpm
1500 rpm 15
kW (HP)
kW (HP)
(13)
(20)
1500 rpm
8 1200 rpm
(11)
1000 rpm 10 1200 rpm
6 (13)
(8) 1000 rpm
600 rpm
600 rpm
4
(5)
5
(7)
2
(3)
0 0
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350
(725) (1450) (2175) (2900) (3625) (4350) (5075) (725 (1450) (2175) (2900) (3625) (4350) (5075)
100 100
Volumetric Volumetric
Overall
Overall
90 90
Efficiency (%)
Efficiency (%)
80 80
70 70
60 60
50 50
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350
(725) (1450) (2175) (2900) (3625) (4350) (5075) (725) (1450) (2175) (2900) (3625) (4350) (5075)
100 100
Volumetric Volumetric
Overall
Overall
90 90
Efficiency (%)
Efficiency (%)
80 80
70 70
60 60
50 50
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350
(725) (1450) (2175) (2900) (3625) (4350) (5075) (725) (1450) (2175) (2900) (3625) (4350) (5075)
P2060 Outlet Flow - Full Stroke P2075 Outlet Flow - Full Stroke
180 200
(48) (53)
2800 rpm 2500 rpm
160 180
(42) (48)
2500 rpm
160
140
Flow L/min (GPM)
P2105 Outlet Flow - Full Stroke P2145 Outlet Flow - Full Stroke
300 350
(79) (92)
2200 rpm
300
250 (79)
(66) 2300 rpm
Flow L/min (GPM)
1800 rpm
250
200 (66)
(53) 1800 rpm 1500 rpm
200
1500 rpm (53)
150 1200 rpm
(40)
1200 rpm 150 1000 rpm
(40)
100 1000 rpm
(26) 100
(26) 600 rpm
600 rpm
50
(13) 50
(13)
0 0
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350
(725) (1450) (2175) (2900) (3625) (4350) (5075) (725) (1450) (2175) (2900) (3625) (4350) (5075)
P2060 Drain Flow at Zero Stroke P2075 Drain Flow at Zero Stroke
5.0 14
(1.30) (3.7)
2500 rpm
4.5 2800 rpm
(1.20) 12
(3.2)
4.0
(2.6)
(.92)
3.0 600 rpm
(.79) 8
(2.1)
600 rpm
2.5
(.66)
6
2.0 (1.6)
(.53)
1.5 4
(.40) (1.0)
1.0
(.26) 2
0.5 (.53)
(.13)
0 0
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350
(725) (1450) (2175) (2900) (3625) (4350) (5075) (725) (1450) (2175) (2900) (3625) (4350) (5075)
P2105 Drain Flow at Zero Stroke P2145 Drain Flow at Zero Stroke
9 20
(2.4) (5.3)
2200 rpm
8 2300 rpm 18
(2.1) (4.8)
7 16
(4.2)
Flow L/min (GPM)
(1.8)
14
6 600 rpm (3.7)
(1.6)
12
5 (3.2)
(1.3) 600 rpm
10
4 (2.6)
(1.0)
8
(2.1)
3
(.79) 6
(1.6)
2
(.53) 4
(1.0)
1
(.26) 2
(.53)
0 0
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350
(725) (1450) (2175) (2900) (3625) (4350) (5075) (725) (1450) (2175) (2900) (3625) (4350) (5075)
100% 2500
3000
2800
2250
2600
2000
2400
2200 1750
2000
1500
Sea Level .6 .8 1.0 1.2 Sea Level .6 .8 1.0 1.2
Sea Level (-6) (-4) (-2) 0 (2) (4) Sea Level (-6) (-4) (-2) 0 (2) (4)
Elevation M(ft.) Elevation M(ft.)
1220 (4000) (-4) (-2) (0) (2) (4) (6) 1220 (4000) (-4) (-2) (0) (2) (4) (6)
2440 (8000) (-2) (0) (2) (4) (6) (8) 2440 (8000) (-2) (0) (2) (4) (6) (8)
3660 (12000) (0) (2) (4) (6) (8) (10) 3660 (12000) (0) (2) (4) (6) (8) (10)
85%
Shaft Speed (RPM)
100%
Shaft Speed (RPM)
2500 2500
100%
2250 2250
2000 2000
1750 1750
1500 1500
Sea Level .6 .8 1.0 1.2 Sea Level .6 .8 1.0 1.2
Sea Level (-6) (-4) (-2) 0 (2) (4) Sea Level (-6) (-4) (-2) 0 (2) (4)
Elevation M(ft.) Elevation M(ft.)
1220 (4000) (-4) (-2) (0) (2) (4) (6) 1220 (4000) (-4) (-2) (0) (2) (4) (6)
2440 (8000) (-2) (0) (2) (4) (6) (8) 2440 (8000) (-2) (0) (2) (4) (6) (8)
3660 (12000) (0) (2) (4) (6) (8) (10) 3660 (12000) (0) (2) (4) (6) (8) (10)
9.5
(.37)
50˚
2 Places
81
(3.19)
101.6/101.55
(4.000/3.998)
146.1
(5.75) 15
B.C. (.59)
12.5
(.492) Outlet
Gauge
Port
o/ 127.00/126.95
(5.000/4.998) 50
(1.97)
114.5
(4.51)
TOP VIEW
Outlet Port Thread Size Lifting Hook
1" 4 Bolt Flange See Chart 235 (3/8-16 Thread)
High Pressure (9.25)
Series (Code 62)
66
(2.59)
81
73 Ripple Chamber Plug (3.19)
(2.87) 90
DO NOT REMOVE 114 (3.54)
(4.49)
114
(4.49)
71
Rotation Arrow Optional (2.80)
51 52 Drain 109
(2.00) (2.05) Ripple Chamber Plug (4.29)
DO NOT REMOVE Port
73 73 See Chart 126
(2.87) (2.87) (4.96)
163
76 85 (6.41)
(3.30) (3.45)
BOTTOM VIEW
Thread Size
See Chart
Inlet Port
2" 4 Bolt Flange
Standard Pressure
Series (Code 61)
224
(8.82)
264
(10.39)
Parker Hannifin Corporation
Hydraulic Pump Division
24 Marysville, Ohio USA
Catalog HY28-1559-01/PT Variable Displacement Piston Pumps
Dimensional Data Series P2
9.5
(.37)
50˚
2 Places
81
(3.19)
101.6/101.55
(4.000/3.998)
146.1
(5.75) 15
B.C. (.59)
114.5 127
(4.51) (5.0)
Inlet gauge port.
See table page 23.
15
(.59)
TOP VIEW
Lifting Hook
(3/8-16 UN-2B Thread)
66
(2.60)
101
Signal Port (3.98)
184
(7.24)
REAR VIEW
92
66
(3.62) SIDE VIEW
(2.60)
49 45 252
(1.93) (1.77) (9.92)
78
(3.07)
29
(1.14)
141
(5.55) 144
(5.67)
124
(4.88) "Weep Hole"
104 Both Sides
(4.09) 96 Seal Option
(3.78) D&V
76
(3.00)
Outlet Port
1" 4 Bolt Flange
High Press Series
Inlet Port (Code 62) 90
104 (3.54)
2" 4 Bolt Flange (4.09)
Standard Press Thread Size
See Table 114
Series (Code 61) (4.89)
Thread Size
See Table
39 71
(1.53) 50 Outlet Optional (2.80)
(1.97) Gauge Drain 109
Port Port (4.29)
79.3 79.3 See table. 121
(3.12) (3.12) (4.76)
163
(6.41)
211
(2.31)
BOTTOM VIEW
241
(9.49)
hru-Shaft
T A B C D E F F G G Pump
Option UNC Metric UNC Metric Weight
82.625/ SAE-A Spline
A1 264 82.575 106.38 N/A 9 Tooth 3/8-16 UNC-2B THD M10 x 1.5 THD N/A N/A 36.2 kg
(10.4) (3.252/ (4.19) 16/32 Pitch (80 lbs)
3.250)
101.676/ SAE-B Spline
B1 297 101.625 146.05 N/A 13 Tooth 1/2-13 UNC-2B THD M12 x 1.75 THD N/A N/A 38.9 kg
(11.7) (4.002/ (5.75) 16/32 Pitch (86 lbs)
4.000)
101.676/ SAE-BB Spline
B2 297 101.625 146.05 N/A 15 Tooth 1/2-13 UNC-2B THD M12 x 1.75 THD N/A N/A 38.9 kg
(11.7) (4.002/ (5.75) 16/32 Pitch (86 lbs)
4.000)
127.076/ SAE-C Spline
C1 C3 299 127.025 180.98 114.5 14 Tooth 5/8-11 UNC-2B THD M16 x 2 THD 1/2-13 UNC-2B THD M12 x 1.75 THD 40.2 kg
(11.8) (5.002/ (7.125) (4.58) 12/24 Pitch (89 lbs)
5.000)
E E
F
C
B
B
C1 & C3 CONFIGURATION A
264
(10.39)
F
C
D
B
E
D
Max Thru-Drive Torque is 336 Nm (2980 lb in)
76
SAE C 2 Bolt (3.00)
Mounting Holes Outlet
2 Places Gauge
17.58 (.692) Diameter Port
32.4
(1.28) 62
(2.44)
194 127.00 (5.00)
(7.63) 126.95 (4.99)
62
(2.44)
81
(3.19)
114.5
194 (4.51)
(7.64)
127.00 (5.00)
126.95 (4.99)
123 Inlet
(4.84) Gauge
Port
SAE C 4 Bolt
Mounting Holes
CCW Pump will 146
14.35 (.565) Diameter 88.2
(3.47)
have inlet and (5.75) 248.5
(9.78)
outlet gauge ports 114.5 270.5
(4.51) (10.65)
reversed.
Outlet Port
1" High Press
Series
4 Bolt Flange
(Code 62)
67.5
(2.66)
201
(7.91)
REAR VIEW Signal Port
"A" SAE-4 Straight Thread O-Ring Port 7/16-20 UNC
"B" ISO 6149 Straight Thread O-Ring Port, M12 x 1.5
112
(4.41)
84.5 Diff Press Adj SIDE VIEW
(3.33) 9.1 Bar (131psi)
55 52 Per Turn
(2.17) (2.05) Sensitivity 102.5
(4.04)
60.5
Press Comp Adj (2.38)
145 154 63.5 Bar
(5.71) (6.06) (921 psi)
Per Turn
130 Sensitivity
(5.12) Weep hole
for D & T
99
(.390)
81
77.5 (3.19)
(3.05)
81
(3.19)
123 95
(4.84) (3.19)
Inlet Port
2" Standard Press Series
4 Bolt Flange (Code 61)
"A"
1/2-13 UNC
"B"
M12X1.75
TOP VIEW
67.5
(2.66)
84.5
(3.33)
112
(4.41)
55
(2.17)
84.5
(3.33)
Diff Press Adj
9.1 BAR (132 PSI) SIDE VIEW
39 52 Per Turn
(1.54) (2.04) Sensitivity 4mm Hex 102.5
(4.04)
145
(5.71)
Outlet Port
1" High Press Series
4 Bolt Flange
(Code 62)
Inlet
Gauge
Port
Optional
Drain Port
51 51 248.5
(2.00) (2.00) (9.78)
81.8 81.8
(3.22) (3.22)
Inlet Port BOTTOM VIEW
2" Standard Press Series
4 Bolt Flange
(Code 61)
270.5
(10.65)
F
B
B
106.38
(4.19) Pumps will be assembled with flange adapters as shown.
Options B1, B2, C1 and C3 can be rotated 90º.
C1 & C3 CONFIGURATION
F
C D
E
B
88
(3.46)
A
D Ref
Max Thru-Drive Torque is 336 Nm (2973 lb in)
Parker Hannifin Corporation
Hydraulic Pump Division
Marysville, Ohio USA 31
Catalog HY28-1559-01/PT Variable Displacement Piston Pumps
Dimensional Data Series P2
SAE C 4-Bolt
194 Mounting
(7.64) Flange 103 97
(4.06) (3.82)
114.5
(4.51)
102
(4.02)
181
(7.125)
Inlet Gauge
Port
114.5 277
(4.5) (10.91)
146
(5.75)
68
(2.69)
REAR VIEW
112 Signal Port 216
(4.41) (8.50)
85
(3.25) Diff Pressure Adj
55
(2.17)
52
(2.05)
9.1 BAR (131PSI) /Turn
Sensitivity 294
SIDE VIEW
(11.57)
Pressure Comp
Adjustment 118
(4.65)
63.5 BAR (921PSI)/
Turn Sensitivity
175
(6.89)
151
(5.94)
120 Weep Hole
(4.72) D&T Option
98 97
(3.86) (3.82)
126.98
102
(4.02)
150 115
(5.91) (4.53)
150
Rotation (5.91)
Arrow
Inlet Port
2-1/2 Inch High Press
Series 4 Bolt Flange
(Code 61)
277
(10.91)
323
(12.72)
E E
A
323
C1 & C3 CONFIGURATION (12.72)
C
D
Outlet Gauge
12.7
(.50)
ø 152.40/152.35 82
(6.000/5.998) (3.23)
161.65
(6.36)
90
(3.54)
20
(.79)
Inlet Gauge
289
161.65 (11.38)
(6.36)
112
(4.41) 12.7
(.50)
127.00/126.95
(5.000/4.998)
15
(.59)
CCW Pump will
have inlet and
outlet gauge ports
180.98 reversed.
(7.125)
Lifting Hook
3/8-16 UN-2B
Outlet Port
1-1/4 Inch High Press
Series 4 Bolt Flange 70
(Code 62) (2.76)
REAR VIEW
220
114 Signal Port (8.66)
(4.49)
87 Diff Pressure 302/292.5
SIDE VIEW
(3.43) Adjustment (11.89/11.52)
58 54 9.1 BAR(132PSI)/ Optional Diff Press 121
(2.28) (2.13) Turn Sensitivity Test Port (-4 SAE) (4.76)
98
Pressure Comp (3.86)
64
186 Adjustment (2.52)
(7.32) 63.5 BAR
(921PSI)/
162 Turn Sensitivity
(6.38)
181 131
(7.13) (5.16) 142
109 (84.33)
102
(4.29) (4.02)
Ripple
Chamber Plug
DO NOT 110
REMOVE (4.33)
Weep Hole
164 Both Sides
(6.46) Seal Option
D&T
Rotation Arrow
82
57 59 (3.23)
(2.24) (2.32) Optional Drain Port
127
100 100
(3.94) (3.94) (5.00)
207
107 118 (8.15)
(4.21) (4.65)
284
BOTTOM VIEW
(11.18)
Dimensons will be reversed on a
counterclockwise pump.
Thread - See Table
118
(4.65)
Inlet Port
2-1/2 Inch Std Press 107
Series 4 Bolt Flange (4.21)
(Code 61)
330
(13.00)
A
329.5
(12.97)
E
F
B B
F
G
B
D C D
B
E
D D
55.6
(2.19) 62.0 75.6
(2.44) (2.98)
38.1 44.4
(1.50) (1.75)
31.75/31.70
"C5" Shaft Option (1.25/1.24) "C6" Shaft Option
SAE "C" Keyed SAE "CC" Keyed "D3" Shaft Option
Maximum Input Torque: Maximum Input Torque: SAE D Keyed
641 Nm (5677 lb in) 1217 Nm (10777 lb in) Maximum Input Torque:
1701 Nm (15057 lb in)
Torque Control
Options "TA","TB","TC & "TD"
200 Nm (1770 lb in) Per Turn
Approximate Sensitivity B
P3 Performance and
Dimension Section
95 95
(25) (25)
70%
76 76
(20) 60%
(20)
57 57 50%
(15) (15)
60%
50% 38
38
(10)
(10) 40%
14
14 30% (5)
(5)
20% 0
0 0 70 140 210 275 345
0 70 140 210 275 345
(1000) (2000) (3000) (4000) (5000)
(1000) (2000) (3000) (4000) (5000)
Pressure (PSI)
Pressure (PSI)
189 189
(50) (50)
151 151
Flow l/min (GPM)
(40) (40)
Flow l/min (GPM)
80%
0
0 70 140 210 275 345
0
0 70 140 210 275 345 (1000) (2000) (3000) (4000) (5000)
(1000) (2000) (3000) (4000) (5000)
Pressure (PSI)
Pressure (PSI)
265 265
(70) (70)
227 227
(60) (60)
189 189
Flow l/min (GPM)
0 0
0 70 140 210 275 345 0 70 140 210 275 345
(1000) (2000) (3000) (4000) (5000) (1000) (2000) (3000) (4000) (5000)
P3075 Noise Characteristics at Max Displacement P3145 Noise Characteristics at Max Displacement
85
90 85
90 2200 RPM
2500 RPM
80 80
85 85
Noise d(B)A Noise d(B)A
2500 RPM
75
80 75
80
1500 RPM
1500 RPM
70
75 70
75
1500 RPM
1500 RPM
65
70 65
70
0 70 140 210 275 320 0 70 140 210 276 320
(1000) (2000) (3000) (4000) (4600) (1000) (2000) (3000) (4000) (4600)
80
85
Noise d(B)A Noise d(B)A
2500 RPM
75
80 1500 RPM
70
75 1500 RPM
65
70
0 70 140 210 275 320
(1000) (2000) (3000) (4000) (4600)
Pressure Bar
65 (PSI)
0 70 140 210 275 320
(1000) (2000) (3000) (4000) (4600)
Parker Hannifin Corporation
Pressure Bar Hydraulic Pump Division
44 Marysville, Ohio USA
(PSI)
Catalog HY28-1559-01/PT Variable Displacement Piston Pumps
Performance Data Series P3
P3075 Input Power - Full Stroke P3105 Input Power - Full Stroke
140 180
(188) (241)
3000 RPM
160
120 (215) 2600 RPM
(161)
2500 RPM 140
(188)
100
(134) 120
(161)
1800 RPM
kW (HP)
kW (HP)
80 1800 RPM 100
(107)
(134)
1500 RPM
1500 RPM
60 80
(80) (107) 1200 RPM
1200 RPM
0 0
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350
(725) (1450) (2175) (2900) (3625) (4350) (5075) (725) (1450) (2175) (2900) (3625) (4350) (5075)
Pressure Bar (PSI) Pressure Bar (PSI)
250
(335)
2500 RPM
200
(268)
(201)
1500 RPM
50 600 RPM
(67)
0
0 50 100 150 200 250 300 350
(725) (1450) (2175) (2900) (3625) (4350) (5075)
Pressure Bar (PSI)
P3075 Input Power - Zero Stroke P3105 Input Power - Zero Stroke
20 25
(27) 3000 rpm (36) 2600 rpm
18
(24)
16 20
(21) 2500 rpm (27)
14
(19)
1800 rpm
12 1800 rpm 15
kW (HP)
kW (HP)
(17) (20)
1500 rpm 1500 rpm
10 1200 rpm
(13) 1000 rpm 1200 rpm
8 600 rpm 10 1000 rpm
600 rpm
(11) (13)
6
(8)
4 5
(5) (7)
2
(3)
0 0
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350
(725) (1450) (2175) (2900) (3625) (4350) (5075) (725) (1450) (2175) (2900) (3625) (4350) (5075)
Pressure Bar (PSI) Pressure Bar (PSI)
35
(47)
2500 rpm
30
(40)
25
(36)
1800 rpm
kW (HP)
20
(27)
1500 rpm
15 1200 rpm
(20) 1000 rpm
600 rpm
10
(13)
5
(7)
0
0 50 100 150 200 250 300 350
(725) (1450) (2175) (2900) (3625) (4350) (5075)
Pressure Bar (PSI)
100 100
Volumetric
Volumetric
Overall Overall
90 90
Efficiency (%)
Efficiency (%)
80 80
70 70
60 60
50 50
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350
(725) (1450) (2175) (2900) (3625) (4350) (5025) (725) (1450) (2175) (2900) (3625) (4350) (5025)
100
Volumetric
Overall
90
Efficiency (%)
80
70
60
50
0 50 100 150 200 250 300 350
(725) (1450) (2175) (2900) (3625) (4350) (5025)
Pressure Bar (PSI)
P3075 Outlet Flow - Full Stroke P3105 Outlet Flow - Full Stroke
250 300
(66) (79)
200
(53) 1800 rpm
150
(40) 1800 rpm
1500 rpm
150
1500 rpm (40)
1200 rpm
100
(26) 1200 rpm
100 1000 rpm
1000 rpm (26)
600 rpm
50 600 rpm
(13) 50
(13)
0 0
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350
(725) (1450) (2175) (2900) (3625) (4350) (5025) (725) (1450) (2175) (2900) (3625) (4350) (5075)
Pressure Bar (PSI) Pressure Bar (PSI)
400
(106)
300
(79)
1800 rpm
250
(66)
1500 rpm
200
(53)
1200 rpm
150 1000 rpm
(40)
100
(26) 600 rpm
50
(13)
slope-l slope-h
0
0 50 100 150 200 250 300 350
(725) (1450) (2175) (2900) (3625) (4350) (5075)
Pressure Bar (PSI)
P3075 Control Drain Flow at Zero Stroke P3105 Control Drain Flow at Zero Stroke
10 14
(2.6) 600 rpm (3.7)
9 3000 rpm 600 rpm
(2.4) 12 2600 rpm
(3.2)
8
Flow L/min (GPM)
(2.1)
6
(1.6) 8
(2.1)
5
(1.3)
6
4 (1.6)
(1.0)
3 4
(.79) (1.0)
2
(.53)
2
1 (.53)
(.26)
0 0
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350
(725) (1450) (2175) (2900) (3625) (4350) (5075) (725) (1450) (2175) (2900) (3625) (4350) (5075)
Pressure Bar (PSI) Pressure Bar (PSI)
14
(3.7)
600 rpm
12 2500 rpm
(3.2)
Flow L/min (GPM)
10
(2.6)
8
(2.1)
6
(1.6)
4
(1.0)
2
(.53)
0
0 50 100 150 200 250 300 350
(725) (1450) (2175) (2900) (3625) (4350) (5075)
Pressure Bar (PSI)
2750 2500
2250
2500
2000
2250
1750
2000 1500
Sea Level .6 .8 1.0 1.2 Sea Level .6 .8 1.0 1.2
Sea Level (-6) (-4) (-2) 0 (2) (4) Sea Level (-6) (-4) (-2) 0 (2) (4)
Elevation M(ft.) Elevation M(ft.)
1220 (4000) (-4) (-2) (0) (2) (4) (6) 1220 (4000) (-4) (-2) (0) (2) (4) (6)
2440 (8000) (-2) (0) (2) (4) (6) (8) 2440 (8000) (-2) (0) (2) (4) (6) (8)
3660 (12000) (0) (2) (4) (6) (8) (10) 3660 (12000) (0) (2) (4) (6) (8) (10)
2500
conditions, at the desired elevation.
2250
For example, for the P3075, at 3000 RPM, and 100% dis-
placement (75 cc/r), the minimum acceptable inlet pres- 2000
sure at sea level is 0 psig. For these same speed displace-
ment conditions, at 4000 feet, the minimum acceptable 1750
76
Alternate Vent Port (3.00)
(1/4 Inch Port)
81
(3.19)
123
(4.84)
146 245
(5.75) (9.65)
Bolt Pattern For Alternate Location #2
SAE C 2 Bolt Mounting For Airbleed Valve
Rotated 30 From Vertical
10
(.39)
68 71
(2.68) (2.80)
Control Drain
Signal Port
158
(6.22)
201
REAR VIEW (7.91)
82
(3.23) 95
120 (3.74)
(4.72)
BOTTOM VIEW
276
(10.87)
240
(9.45) 127
(5.00)
Oulet Port
1 Inch High Press
Series 4 Bolt Flange
(Code 62)
Inlet Port
2 Inch Std Press
Series 4 Bolt Flange
(Code 61) Parker Hannifin Corporation
Hydraulic Pump Division
52 Marysville, Ohio USA
Catalog HY28-1559-01/PT Variable Displacement Piston Pumps
Dimensional Data Series P3
B B
F
106.38
(4.19)
C1 & C3 CONFIGURATION
C D
D A
Max Thru-Drive Torque is 429 Nm (3800 lb in)
95
(7.68)
Inlet Gauge
SAE-C 2-Bolt Port/Vent
Mounting Holes Fill
2 Places
12.5
103 (.49)
(4.05)
Mounting Flange
SAE-C 4-Bolt
114.5
(4.51)
146
(5.75)
REAR VIEW
112 Diff Pressure
85
(4.41)
Adjustment SIDE VIEW
(3.35) 9.1 BAR (131 PSI)/ Optional Diff Pressure
55 52 Turn Sensitivity Test Port 1/4 Inch Port
(2.17) (2.05) 297
Pressure (11.69)
Comp 117
(4.61)
Adjustment
63.5 BAR
175 (921 PSI)/
(6.89) Turn Sensitivity
126.98
93
(3.66)
115
108 (4.53)
150 (4.25)
(5.87)
147
(5.79)
Rotation Arrow
BOTTOM VIEW
Inlet Port
2-1/2 Inch Std Press
Series 4 Bolt Flange
Outlet Port (Code 61)
1-1/4 Inch High Press
Series 4 Bolt Flange
(Code 62)
148
(5.83)
265
(10.43)
310
(12.20)
E
F
E
B
B
C1 & C3 CONFIGURATION A
G
D C
Max Vol A
SAE C 2-BOLT MOUNTING FLANGE 7.8 CC/Turn Sensitivity
Min Displacement:
Inlet Gauge or 100 CCDJ
Vent/Fill Port
12.70(.50)
12.20(.48)
112
(4.41)
127.00 (5.00)
126.95 (4.998)
15
(.59)
Optional Location
For Airbleed Valve
181
(7.125)
112
(4.41)
12.70
(.50)
20
(.79)
161.65 281
(6.36) (11.06) Optional Location For
Airbleed Valve
70
73 (2.76)
(2.87)
Rotation Arrow
94
(3.70) 125
109 (4.92)
(4.29) 161
(6.34)
57 82
(2.24) Inlet Gauge Port (3.23)
100 127
(3.94) (5.00)
114 208
(4.49) (8.19)
270
(10.63)
281
(11.06)
BOTTOM VIEW
Thread - See Table
Outlet Port
1-1/4 Inch High Press 107
Series 4 Bolt Flange (4.21)
(Code 62)
107
(4.21)
A
330
(12.99)
***NOTE***
Maximum Thru-Drive Torque Capability is
Limited to 1217 Nm (10777 lb in)
F
B
E
B
C C
G G
B E
D C D
E
B
D
D
62.0 75.6
(2.44) (2.98)
38.1 44.4
(1.50) (1.75)
31.75/31.70
"C5" Shaft Option (1.25/1.24) "C6" Shaft Option
SAE "C" Keyed SAE "CC" Keyed "D3" Shaft Option
Maximum Input Torque: Maximum Input Torque: SAE D Keyed
641 Nm (5677 lb in) 1217 Nm (10777 lb in) Maximum Input Torque:
1701 Nm (15057 lb in)
TA TB TC TD
200 Nm (1770 lb in)
of Torque Per Turn B
Installation Instructions
1. When mounting the pump on a system where the fluid level is above the pump inlet (L-shaped or over-
head reservoir) the pump case must be full of fluid before starting. This can be accomplished by loosening
an inlet gauge port plug or opening the inlet line and allowing gravity to pre-fill the inlet line and case.
When mounting the pump on a system where the fluid level is below the pump inlet (JIC reservoir) the
following start-up procedure is recommended. Put approximately 16 ounces of fluid in the pump case to
lubricate parts during priming. Remove plug (7/16-20 SAE-4) from air bleed drain port and connect an
unrestricted line to tank below minimum fluid level. Start motor and run until pump primes or a maxi-
mum of 30 seconds. If pump does not prime in 30 seconds, stop motor (shaft rotating) and repeat until
pump primes.
2. Do not apply side loads to the pump drive shaft. If side loading is necessary contact your Parker represen-
tative.
3. Pump and motor shaft alignment must be within .25 millimeters (0.010 inches) TIR using standard float-
ing coupling (no end loading).
4. The P2/P3 series of pumps are uni-directional and must be driven in the direction indicated by the arrow
on the back of the rear cover.
5. Check all inlet connections to be sure they are airtight. An air leak in the inlet line can cause the pump
case to drain down and lose prime during succeeding start-ups.
6. The pressure compensator is factory set and can be lowered for start-up. Clockwise rotation increases the
compensator setting and counter clockwise rotation decrease the compensator setting. Pump compensa-
tor should be set with the system deadheaded.
7. The differential pressure adjustment and torque control adjustment are factory set - readjustment is not
recommended, contact your Parker representative.
The items described in this document and other documents and descriptions provided by Parker Hannifin Corporation, Hydraulics Group, and its authorized distributors (“Seller”) are
hereby offered for sale at prices to be established by Seller. This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and Conditions.
Buyer’s order for any item described in its document, when communicated to Seller verbally, or in writing, shall constitute acceptance of this offer. All goods or work described will be
referred to as “Products”.
1. Terms and Conditions. Seller’s willingness to offer Products, or accept an order 11. Buyer’s Obligation; Rights of Seller. To secure payment of all sums due or other-
for Products, to or from Buyer is expressly conditioned on Buyer’s assent to these wise, Seller shall retain a security interest in the goods delivered and this agreement
Terms and Conditions and to the terms and conditions found on-line at www.parker. shall be deemed a Security Agreement under the Uniform Commercial Code. Buyer
com/saleterms/. Seller objects to any contrary or additional term or condition of Buyer’s authorizes Seller as its attorney to execute and file on Buyer’s behalf all documents
order or any other document issued by Buyer. Seller deems necessary to perfect its security interest. Seller shall have a security
2. Price Adjustments; Payments. Prices stated on the reverse side or preceding interest in, and lien upon, any property of Buyer in Seller’s possession as security for the
pages of this document are valid for 30 days. After 30 days, Seller may change prices payment of any amounts owed to Seller by Buyer.
to reflect any increase in its costs resulting from state, federal or local legislation, price 12. Improper Use and Indemnity. Buyer shall indemnify, defend, and hold Seller
increases from its suppliers, or any change in the rate, charge, or classification of any harmless from any claim, liability, damages, lawsuits, and costs (including attorney
carrier. The prices stated on the reverse or preceding pages of this document do not fees), whether for personal injury, property damage, patent, trademark or copyright
include any sales, use, or other taxes unless so stated specifically. Unless otherwise infringement or any other claim, brought by or incurred by Buyer, Buyer’s employees,
specified by Seller, all prices are F.O.B. Seller’s facility, and payment is due 30 days from or any other person, arising out of: (a) improper selection, improper application or other
the date of invoice. After 30 days, Buyer shall pay interest on any unpaid invoices at the misuse of Products purchased by Buyer from Seller; (b) any act or omission, negligent
rate of 1.5% per month or the maximum allowable rate under applicable law. or otherwise, of Buyer; (c) Seller’s use of patterns, plans, drawings, or specifications
3. Delivery Dates; Title and Risk; Shipment. All delivery dates are approximate and furnished by Buyer to manufacture Product; or (d) Buyer’s failure to comply with these
Seller shall not be responsible for any damages resulting from any delay. Regardless of terms and conditions. Seller shall not indemnify Buyer under any circumstance except
the manner of shipment, title to any products and risk of loss or damage shall pass to as otherwise provided.
Buyer upon tender to the carrier at Seller’s facility (i.e., when it’s on the truck, it’s yours). 13. Cancellations and Changes. Orders shall not be subject to cancellation or
Unless otherwise stated, Seller may exercise its judgment in choosing the carrier and change by Buyer for any reason, except with Seller’s written consent and upon terms
means of delivery. No deferment of shipment at Buyers’ request beyond the respective that will indemnify, defend and hold Seller harmless against all direct, incidental and
dates indicated will be made except on terms that will indemnify, defend and hold Seller consequential loss or damage. Seller may change product features, specifications,
harmless against all loss and additional expense. Buyer shall be responsible for any designs and availability with notice to Buyer.
additional shipping charges incurred by Seller due to Buyer’s changes in shipping, 14. Limitation on Assignment. Buyer may not assign its rights or obligations under
product specifications or in accordance with Section 13, herein. this agreement without the prior written consent of Seller.
4. Warranty. Seller warrants that the Products sold hereunder shall be free from 15. Entire Agreement. This agreement contains the entire agreement between the
defects in material or workmanship for a period of eighteen months from the date of Buyer and Seller and constitutes the final, complete and exclusive expression of the
delivery to Buyer. The prices charged for Seller’s products are based upon the exclu- terms of the agreement. All prior or contemporaneous written or oral agreements or
sive limited warranty stated above, and upon the following disclaimer: DISCLAIMER negotiations with respect to the subject matter are herein merged.
OF WARRANTY: THIS WARRANTY COMPRISES THE SOLE AND ENTIRE 16. Waiver and Severability. Failure to enforce any provision of this agreement will
WARRANTY PERTAINING TO PRODUCTS PROVIDED HEREUNDER. SELLER not waive that provision nor will any such failure prejudice Seller’s right to enforce that
DISCLAIMS ALL OTHER WARRANTIES, EXPRESS AND IMPLIED, INCLUDING provision in the future. Invalidation of any provision of this agreement by legislation or
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. other rule of law shall not invalidate any other provision herein. The remaining provisions
5. Claims; Commencement of Actions. Buyer shall promptly inspect all Products of this agreement will remain in full force and effect.
upon delivery. No claims for shortages will be allowed unless reported to the Seller 17. Termination. This agreement may be terminated by Seller for any reason and at
within 10 days of delivery. No other claims against Seller will be allowed unless asserted any time by giving Buyer thirty (30) days written notice of termination. In addition, Seller
in writing within 60 days after delivery or, in the case of an alleged breach of warranty, may by written notice immediately terminate this agreement for the following: (a) Buyer
within 30 days after the date within the warranty period on which the defect is or should commits a breach of any provision of this agreement (b) the appointment of a trustee,
have been discovered by Buyer. Any action based upon breach of this agreement or receiver or custodian for all or any part of Buyer’s property (c) the filing of a petition
upon any other claim arising out of this sale (other than an action by Seller for any for relief in bankruptcy of the other Party on its own behalf, or by a third party (d) an
amount due to Seller from Buyer) must be commenced within thirteen months from assignment for the benefit of creditors, or (e) the dissolution or liquidation of the Buyer.
the date of tender of delivery by Seller or, for a cause of action based upon an alleged 18. Governing Law. This agreement and the sale and delivery of all Products here-
breach of warranty, within thirteen months from the date within the warranty period on under shall be deemed to have taken place in and shall be governed and construed
which the defect is or should have been discovered by Buyer. in accordance with the laws of the State of Ohio, as applicable to contracts executed
6. LIMITATION OF LIABILITY. UPON NOTIFICATION, SELLER WILL, AT ITS OPTION, and wholly performed therein and without regard to conflicts of laws principles. Buyer
REPAIR OR REPLACE A DEFECTIVE PRODUCT, OR REFUND THE PURCHASE irrevocably agrees and consents to the exclusive jurisdiction and venue of the courts of
PRICE. IN NO EVENT SHALL SELLER BE LIABLE TO BUYER FOR ANY SPECIAL, Cuyahoga County, Ohio with respect to any dispute, controversy or claim arising out
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF, OR of or relating to this agreement. Disputes between the parties shall not be settled by
AS THE RESULT OF, THE SALE, DELIVERY, NON-DELIVERY, SERVICING, USE arbitration unless, after a dispute has arisen, both parties expressly agree in writing to
OR LOSS OF USE OF THE PRODUCTS OR ANY PART THEREOF, OR FOR ANY arbitrate the dispute.
CHARGES OR EXPENSES OF ANY NATURE INCURRED WITHOUT SELLER’S 19. Indemnity for Infringement of Intellectual Property Rights. Seller shall have
WRITTEN CONSENT, EVEN IF SELLER HAS BEEN NEGLIGENT, WHETHER IN no liability for infringement of any patents, trademarks, copyrights, trade dress, trade
CONTRACT, TORT OR OTHER LEGAL THEORY. IN NO EVENT SHALL SELLER’S secrets or similar rights except as provided in this Section. Seller will defend and
LIABILITY UNDER ANY CLAIM MADE BY BUYER EXCEED THE PURCHASE indemnify Buyer against allegations of infringement of U.S. patents, U.S. trademarks,
PRICE OF THE PRODUCTS. copyrights, trade dress and trade secrets (“Intellectual Property Rights”). Seller will
7. Contingencies. Seller shall not be liable for any default or delay in performance if defend at its expense and will pay the cost of any settlement or damages awarded in an
caused by circumstances beyond the reasonable control of Seller. action brought against Buyer based on an allegation that a Product sold pursuant to this
8. User Responsibility. The user, through its own analysis and testing, is solely Agreement infringes the Intellectual Property Rights of a third party. Seller’s obligation to
responsible for making the final selection of the system and Product and assuring that defend and indemnify Buyer is contingent on Buyer notifying Seller within ten (10) days
all performance, endurance, maintenance, safety and warning requirements of the after Buyer becomes aware of such allegations of infringement, and Seller having sole
application are met. The user must analyze all aspects of the application and follow control over the defense of any allegations or actions including all negotiations for settle-
applicable industry standards and Product information. If Seller provides Product or ment or compromise. If a Product is subject to a claim that it infringes the Intellectual
system options, the user is responsible for determining that such data and specifications Property Rights of a third party, Seller may, at its sole expense and option, procure for
are suitable and sufficient for all applications and reasonably foreseeable uses of the Buyer the right to continue using the Product, replace or modify the Product so as to
Products or systems. make it noninfringing, or offer to accept return of the Product and return the purchase
9. Loss to Buyer’s Property. Any designs, tools, patterns, materials, drawings, confi- price less a reasonable allowance for depreciation. Notwithstanding the foregoing, Seller
dential information or equipment furnished by Buyer or any other items which become shall have no liability for claims of infringement based on information provided by Buyer,
Buyer’s property, may be considered obsolete and may be destroyed by Seller after or directed to Products delivered hereunder for which the designs are specified in whole
two consecutive years have elapsed without Buyer placing an order for the items which or part by Buyer, or infringements resulting from the modification, combination or use in
are manufactured using such property. Seller shall not be responsible for any loss or a system of any Product sold hereunder. The foregoing provisions of this Section shall
damage to such property while it is in Seller’s possession or control. constitute Seller’s sole and exclusive liability and Buyer’s sole and exclusive remedy for
10. Special Tooling. A tooling charge may be imposed for any special tooling, including infringement of Intellectual Property Rights.
without limitation, dies, fixtures, molds and patterns, acquired to manufacture Products. 20. Taxes. Unless otherwise indicated, all prices and charges are exclusive of excise,
Such special tooling shall be and remain Seller’s property notwithstanding payment of sales, use, property, occupational or like taxes which may be imposed by any taxing
any charges by Buyer. In no event will Buyer acquire any interest in apparatus belonging authority upon the manufacture, sale or delivery of Products.
to Seller which is utilized in the manufacture of the Products, even if such apparatus 21. Equal Opportunity Clause. For the performance of government contracts and
has been specially converted or adapted for such manufacture and notwithstanding where dollar value of the Products exceed $10,000, the equal employment opportunity
any charges paid by Buyer. Unless otherwise agreed, Seller shall have the right to alter, clauses in Executive Order 11246, VEVRAA, and 41 C.F.R. §§ 60-1.4(a), 60-741.5(a),
discard or otherwise dispose of any special tooling or other property in its sole discretion and 60-250.4, are hereby incorporated.
at any time.