Professional Documents
Culture Documents
Manual
Ver: 7.16.0.2
[ ]Revision Pages
Notes
The contents described in this manual may be different from the version you are currently
using. If you are unable to resolve a problem using the manual please contact the
company's technical support department or supplier. The contents of this manual will be
updated from time to time, the Company reserves the right not to give notification of any
changes.
The Company does not assume any responsibility or any liability, loss or risk, direct or indirect
outcome from the use or application of any of the contents of this document arising from any
inaccuracies or omissions in this document. This manual may contain screen shots used in
day-to-day operations, the reporting, person and company names may be fictitious. Any
similarity in the name and address of the company or an individual in reality is purely
coincidental.
QCT 2019
1
Directory
Contents
1. Product Introduction..........................................................................................................................................3
1.1. Product Functions.................................................................................................................................. 3
1.2. Features Introduction............................................................................................................................ 3
1.3. System Architecture.............................................................................................................................. 4
2. CMSServer Deployment.................................................................................................................................. 6
2.1. CMSServer Minimum Requirements.................................................................................................. 6
2.2. Media Streaming Server....................................................................................................................... 6
2.3. Examples of System Deployment....................................................................................................... 7
2.3.1. 200 Vehicles/Devices.................................................................................................................7
2.3.2. 5000 Vehicles/Devices.............................................................................................................. 7
2.3.3. 50000 Vehicles/Devices............................................................................................................ 8
2.4. CMSServer Operating Processes....................................................................................................... 8
2.5. Login to System..................................................................................................................................... 9
3. Server Installation............................................................................................................................................. 9
4. Server Configuration.......................................................................................................................................17
4.1. CMSServer Server Port Description................................................................................................. 17
4.2. CMSServer System Configuration.................................................................................................... 17
4.2.1. Database view and configure................................................................................................. 17
4.2.2. DIY: logo and title customization............................................................................................19
4.2.3. CMSServer server modify network IP address....................................................................20
4.2.4. Modified CMSServer server web access port......................................................................21
4.2.5. SMS configuration.................................................................................................................... 22
4.2.6. Email configuration...................................................................................................................23
4.2.7. Storage configuration...............................................................................................................24
4.2.8. WIFI configuration.................................................................................................................... 25
4.3. CMSServer Introduction..................................................................................................................... 26
4.3.1. Login Server.............................................................................................................................. 26
4.3.2. Gateway Server........................................................................................................................ 27
4.3.3. Media Server................................................................................................................ 28
4.3.4. User Server............................................................................................................................... 29
4.3.5. WIFI Download Server.............................................................................................................30
4.3.6. Storage Server.......................................................................................................................... 31
5. Server Registration......................................................................................................................................... 32
5.1. Server registered version (free)................................................................................................... 33
5.2. Server registered version................................................................................................................... 33
6. How to upgrade the CMSserver................................................................................................................... 33
6.1. Web port................................................................................................................................................33
6.2. Backup database file........................................................................................................................... 34
6.3. Cover-Install the new CMSserver..................................................................................................... 35
7. Backup and restore data................................................................................................................................ 36
7.1. Storage location of Backup data....................................................................................................... 36
7.2. Backup data manually.........................................................................................................................37
7.2.1. Backup....................................................................................................................................... 37
7.2.2. Restore.......................................................................................................................................38
7.3. Backup data automatically................................................................................................................. 39
7.3.1. Backup....................................................................................................................................... 39
7.3.2. Restore.......................................................................................................................................40
7.4. Upload file to CMS/FTP...................................................................................................................... 41
7.5. Check the Port of FTP....................................................................................................................... 41
7.6. Set the alarm storage space.............................................................................................................. 42
7.7. Set the storage..................................................................................................................................... 42
7.8. Check the file........................................................................................................................................ 43
8. Set WIFI Auto-download function................................................................................................................. 44
8.1. Set AP linkage in CMS Server...........................................................................................................44
8.2. Set the Rule.......................................................................................................................................... 46
8.3. Check the status.................................................................................................................................. 48
9. Add multi wifi download services on same server..................................................................................... 49
9.1. Description............................................................................................................................................ 49
9.2. Add multi download services for wifi download...............................................................................49
2
9.3. Restart CMS server to run the new service.....................................................................................51
9.4. Set the new added service................................................................................................................. 51
9.5. Forward ports for new added services............................................................................................. 54
10. Https function.................................................................................................................................................54
11. WIFI Download server cascade..................................................................................................................56
1. Product Introduction
• Quickly locate and track vehicles quickly via GPS information, displays real-time
vehicle status display online and statistical interpretation of data collected
3
alarm, Motion detection alarm, Long idling time alarm, Temperature alarm, GPS
signal lost alarm, IO alarm (custom ), Electronic map lock alarm.
1. Login Server
2. Gateway Server
5. Storage Server
7. Web server
4
Users have the option of deploying 1 or 2 of the 7 Functional Servers stated above such as, Login
Servers, Multiple Gateways Servers, Media Streaming Servers, Multiple Users Management
Servers to provide Mobile DVR and Remote Client Services and features as GPS Location, Video
and Alarms.
Database Server: Used mainly as Storage Server, Configuration information and Alarm
events.
Login Server: For registration of various servers and to coordinate and manage
registered servers, Assign User Clients, Configure End Management Server, Allocation of
Gateway Server for MDVR devices, User Management, Gateway Servers, Server Load
Balancing.
Gateway Server: Provide vehicle access. Vehicle Gateway Server is used to establish a
communication link between the MDVR device and the server, sending vehicle location
and status information via this link.
Streaming Media Server: Provides media data forwarding function. Including Audio and
Video, Intercom, Remote Monitoring, Remote Capture, Configuration parameters, Search
and forwarding Download data.
Storage Server: For storing pictures, video capture and reduce costs.
WIFI Auto Download Server: When within the assigned access point range, the WIFI
enabled MDVR will automatically upload the video files onto the server.
Web Server: Provides GIS electronic map information, and provide links to the CMS
Backroom Control center, Front End management system login.
Remote Client Application: Provides real-time video preview, GPS positioning, electronic
map display, vehicle status monitoring, image capture, video search, video download and
playback, vehicle tracking playback, real-time alarm information monitoring, alarm statistics,
vehicle configuration parameters and other functions. The Remote Client is available as Web
Client, PC Windows Client, IOS and Android Version Clients, allowing users different ways to
login and manage their vehicle.
5
2. CMSServer Deployment
RAM 4G or more
CD Player DVR-ROM
LED Indicator lights for Computer, HDD and other Activities Status
Video Bandwidth
6
NOTE: As the MDVR device in a 3G network environment has
network bandwidth limitations. The maximum upload is using CIF
resolution video format.
7
2.3.3. 50000 Vehicles/Devices
Steps:
8
2.5. Login to System
Login to the management system (address: http://localhost IP), Local host CMSServer is
where the server resides, PC's IP address. CMSServer BackOffice management system
default login name and password are: admin /admin
3. Server Installation
Requirements:
Existing CMSServer installation can directly install the new version of the
CMSServer.
9
1. Double Click to run CMSServer installation.
10
4. Specify the target installation path, click "Next" to continue.
5. Select additional tasks (whether to create a desktop shortcut), and then click "Next" to
continue
11
Pic 3.4 Choose whether to create a desktop shortcut
12
Pic 3.5 Installation Process
13
Pic 3.6 Database Configuration Parameters
14
9. Click on “Next”to start Web Server Configuration Parameters
15
9. Click on “Finish” to activate CMSServer Server Control.
16
4. Server Configuration
User Management
6603 6603 Client Service Port
Server 6603 –TCP and UDP
WIFI Download
6610 Device Service Port 6610 - TCP
Server 6609 6610
6609 Client Service Port 6609–TCP and UDP
17
Note: The database configuration, installation package has already been configured for this
version of CMSServer.
For more detail about how to backup and restore the database, please refer to Sector 6 in
following text.
18
4.2.2. DIY: logo and title customization
Customization: You can make a 70*62 transparent PNG picture, and set as your Logo.
Upload the PNG picture first by Select, input the title and other information if you need, then click
the Modify. It’s better to reset the Web server.
19
4.2.3. CMSServer server modify network IP address
The CMSserver will detect the all available IP address automatically. If it’s wrong, you can input
by manual , and click OK to modify it. Then select the LAN or WAN IP according to your test
environment.
20
4.2.4. Modified CMSServer server web access port
Here you can modify the web service port configuration 80 port has been occupied, as
shown below: 80, 88, 8080, 8088.
Four ports for selection, if you change it , make sure forward the new ports on the
router or firewall.
New CMS system support Https function also, we will explain in sector 8 Https function.
21
4.2.5. SMS configuration
SMS function need customers local SMS module supplier support and install on the server’s
PC. Besides , we also need to debug our firmware.
For SMS function out of china area, you need pay Amazon cloud for this service.
22
4.2.6. Email configuration
You should apply an Email account by yourself in local country, such as Gmail. Some E-
mail supplier don’t support the third party login function. Then input the mail account and
password, check the SMTP port.
Notice: If it sends too much E-mails everyday, it maybe blocked the email account by the mail
supplier, please ask supplier for help.
Attention ;
1. We suggest you apply Gmail, some email suppliers don’t support this function.
2. If this Email account sending too many mails, the email suppliers may block it.
3. Input the correct mail address and password, SMTP port and type.
23
4.2.7. Storage configuration
Storage server is used for saving the files from the device’s live streaming if the vehicle break the rule
(need set the rule first), or upload the alarm files in the device(also need set the alarm file and setting
on the device first) at real-time.
Reserve space: When the new file cover the old file , set a reverse space for HDD.
Warn Space: Set a space for warning .
Save days, Day(N): Normal file; Day(A): Alarm files.
Store Real time video: Yes or No.
Split time: Video’s saving time range.
File format: Grec or Mp4 for option.
Task Count:128 is maximum.
Attention :
1. If there is no WIFI AP, such as the vehicle is running outside, these videos will be upload by SIM
card directly if you have set them.It will cost lots of data of SIM card.
2. For the rule setting, if there is no SIM card signal, the video will not be uploaded.
24
4.2.8. WIFI configuration
WIFI download is used for uploading the recorded files in the SD/HDD, when the vehicle arrived
in the WIFI coverage area.
Reserve space: When the new file cover the old file, set a reverse space for HDD
Warn Space: Set a space for warning.
Save days, Day(N): Normal file; Day(A): Alarm files;
Download parameters:
Days: Decide how many days’ file to be downloaded.1 day means today.
File/Device: Simultaneously download files(videos)for one Device.
Mode : Max device mode or Max file mode.
Max device : The maximum device number for uploading.
Max file :The maximum file numbers for uploading.
The WIFI download speed is about 1-2MB/s for one device, the total speed is dependent on the
Router’s configuration (For 1300M router, the total speed is about 12MB/s). We suggest download
alarms’ file only!
25
4.3. CMSServer Introduction
From the main CMSServer Server window, select "Login Server", "Service Configuration" button
and then click on the top of the interface, log on to the server can be configured in the form of
pop-up network parameters, as shown below:
Client Access Port : Registered Client Users connect to the server through this port.
Default is 6605, it is recommended not to modify.
One or 2 servers can be deployed on the CMSServer system and log on to the server,
one of them as the primary server, another as Login (Backup) server. When the Login
server fails, the Login server by switching to a virtual IP, will not affect the normal use of
the device and the client.
26
4.3.2. Gateway Server
1.From the main CMSServer Server window, select "Gateway Server", Click "Service
Configuration" button which on the top of the interface, then you can configure your gateway
server parameter , as shown below:
Server port: Client Access the Login Server service port, default 6605, does not propose
to modify.
27
Server ID:Each Gateway Server has a unique number. The system can deploy one or
more Gateway Servers, Login Server uses the unique number to distinguish between
different gateway server, the unique number must be the same as the ID of the gateway
server, and server management information defined in CMSServer BackOffice
Management System.
Client Access Port: Through this port to provide service for the Client and Media, default
is 6607 ,does not propose to modify.
Device Access Port: Through this port to provide instruction registration service for car
DVR. Default setting is 6608, does not propose to modify.
1. From the main CMSServer Server window, select "Login Server", "Service
Configuration" button and then click on the top of the interface, media server can be
configured in the form of pop-up network parameters, as shown below:
28
Login Server Address: Login Server uses the PC's Server IP address. If the Media server
and Login Server are on the same PC, you can enter 127.0.0.1, where the Media and Login
Server resides on the same LAN, the IP configuration should be the LAN IP Address. If the
enter log on to the server where the LAN IP address, and vice versa, enter log on to the
server where the PC's public IP address, and enter the Windows service to modify the
properties on the media server login tab); 127.0.0.1 address is not valid in a particular case
must input CMSServer server where PC's IP.
Server port: Client Access the Login Server service port, default 6605, not advised to
change.
Server ID : Each Media Server has a unique number. The system can deploy one or more
Media Servers, Login Server uses the unique number to distinguish between different Media
server, the unique number must be the same as the ID of the Media Server, and server
management information defined in CMSServer BackOffice Management System;
Client Access Port: Through this port to provide Media forwarding service,default is 6604 ,
does not propose to modify.
1. From the main CMSServer Server window, select "Login Server", "Service
Configuration" button and then click on the top of the interface, user server can be
configured in the form of pop-up network parameters, as shown below:
Login Server Address: Login Server uses the PC's Server IP address. If the User
server and Login Server are on the same PC, you can enter 127.0.0.1, where the User
and Login Server resides on the same LAN, the IP configuration should be the LAN IP
Address. If the enter log on to the server where the LAN IP address, and vice versa enter
log on to the server where the PC's public IP address, and enter the Windows service to
modify the properties on the User Server login tab); 127.0.0.1 address is not valid in a
particular case must input CMSServer server where PC's IP.
Server port: Client Access the Login Server service port, default is 6605, do not advise
to change.
29
Pic 4.3.4 User Server Configuration Parameters
Server ID:Each User Server has a unique number. The system can deploy one or more
User Servers, Login Server uses the unique number to distinguish between different User
server, the unique number must be the same as the ID of the User server, and server
management information defined in CMSServer BackOffice Management System.
Client Access Port: Through this port to provide registration and update data service,
default is 6603 ,do not propose to modify.
30
Pic 4.3.5 WIFI download Server Configuration Parameters
Login Server Address: Login Server uses the PC's Server IP address. If the WIFI Download
Server and Login Server are on the same PC, you can enter 127.0.0.1, where the WIFI
Download Server and Login Server resides on the same LAN, the IP configuration should be
the LAN IP Address. If the enter log on to the server where the LAN IP address, and vice
versa enter log on to the server where the PC's public IP address, and enter the Windows
service to modifDownload Server login tab); 127.0.0.1 address is not valid in a particular case
must input CMSServer server where PC's IP.
Server port: Client Access the Login Server service port, default 6605, not advised to
change.
Server ID:Each WIFI Download Server has a unique number. The system can deploy one or
more WIFI Download Servers, Login Server uses the unique number to distinguish between
different WIFI Download Server, the unique number must be the same as the ID of the WIFI
Download Server, and server management information defined in CMSServer BackOffice
Management System.
31
Pic 4.3.6 Storage Server Configuration Parameters
Login Server Address: Login Server uses the PC's Server IP address. If the Storage Server and
Login Server are on the same PC, you can enter 127.0.0.1, where the Storage Server and Login
Server resides on the same LAN, the IP configuration should be the LAN IP Address. If the enter
log on to the server where the LAN IP address,and vice versa enter log on to the server
where the PC's public IP address, and enter the Windows service to modify the
properties on the WIFI Download Server login tab); 127.0.0.1 address is not valid in a
particular case must input CMSServer server where PC's IP.
Server port: Client Access the Login Server service port, default 6605, not advised to
change.
Server ID:Each Storage Server has a unique number. The system can deploy one or
more Storage Servers, Login Server uses the unique number to distinguish between
different Storage Server, the unique number must be the same as the ID of the Storage
Server, and server management information defined in CMSServer BackOffice
Management System.
5. Server Registration
Free server version and the registered version only difference is to manage the number
of vehicles. The free version can manage 10 vehicles.The registered version can manage
the number of vehicles to be determined based on the serial number to developers.
32
5.1. Server registered version (free)
The free version of the CMSServer server without the server registration operation, data
can be configured to use.
2.The software registration interface at this time you can see the signature of this server,
as shown above the red box shown
3. When mouse click "Copy to clipboard" signature copied to the clipboard, and fill our
form (include the Signature, WAN IP address, vehicle numbers) and send to us.
4. When we received your requirement ,will register for you in 2 workdays.
5. Refresh it, you will see the new license numbers.
33
6.2. Backup database file
34
It will display success ,and path for the backup file.
Check the files in GPSDBBackup\REPAIR .
If the backup file is OK, you can exit the CMSserver now. Must wait until the program close by
itself!
35
Click the rest steps until it’s finished.
36
7.2. Backup data manually
7.2.1. Backup
We suggest backup the Base data only, the big data will cost a very long time. After finished, it will
show “Backup success”.
37
5. Check the files in GPSDBBackup\REPAIR.
Notice:All the manually backup files will be saved in the REPAIR folder.
If user wants to transfer and save the backup files, backup the database manually first , and then
copy the REPAIR folder to other USB flash driver/sd card/HDD.
7.2.2. Restore
38
2.Click Database→Advanced→Restore Data, select the type(Base or Big Data), choose the days,
specify the storage path.
Number of days : System default range is 0-180days. If you want to restore one year before (more
than 180 days ) .For example : Now you need to restore last year’s data, 2017/01/01-2017/06/30, but
it’s more than 180 days from now . You can change the CMS Server ‘s PC date to 2017/07/01 at a
free time. After restoring, remember to change it back .
3.Click OK, it will begin to restore the data. That will take some minutes.
4.After that, you can login the CMS server with client software or web to check the data.
7.3.1. Backup
Besides the manually backup file, the other method is automatically backup file in History Backup.
As long as the Server is running, it will backup the files automatically at the setting time.
39
1.Open the CMS server Control.
2.Click History Backup ,set the time ,and choose the period.
3.Click OK, it will backup the files at the setting time automatically.
The files will be saved in the GPSDBBackup folder .
7.3.2. Restore
When restore the backup data , the system will chose the files in REPAIR folder first, which means
the manually backup data is in priority. It will restore the automatically backup data only when
there is no REPAIR folder.
40
If the real-time database was damaged and the manually backup data are very old, you had to use
the automatically backup data .
1. At this time, please change the REPAIR folder name to avoid the confusion ( in case of the system
restore the old manually backup data first ).
2. The other operation please refer to 2.2 How To Restore The Files, it’s the same .
41
7.6. Set the alarm storage space.
Set a bigger size for saving the alarm videos and snapshot picture. It dependents the requirement.
You can set as 4GB, 5GB or other size according to your requirement.
Then click FORMAT icon, the SD/HDD will format the disk, and get a partition.
42
For FTP of CMSserver
IP is CMSserver’s IP address. Port: 2121
User: admin Password: cmsserverv6
For FTP server of your own built, input the info you had created.
For FTP, check the files in GPS_FTP, files will be named by device ID.
For CMS storage server, it will be shown in the gStorage folder, file will be named by device ID.
43
In the gStorage folder, the video format is Grec, and picture is JPG format.
Go to Server – Download Site, click EDIT to change the SSID to the SSID of AP.
44
SSID: It’s your device connect WIFI’s name, must be same. This WIFI could be the bus stop or
garage’s WIFI signal.
When the vehicle enter the WFI coverage area, the device will connect it. Then the server will detect
this connection status. And execute the WIFI download .
The download server Number must be same WiFi Download server’s config in Server ID.
45
8.2. Set the Rule
Login server web page .
Go to Rules - Rule Maintenance – WI-FI Download, and add a rule.
Click Assignment and link the rule to device , and save the settings.
You can choose “Assigned” to see the device linkage.
Time Range : It’s the recorded files’ time . For example, if you select 12:00-14:00, it will down this
range’s recorded files in the HDD/SD.
Alarm Type: We suggest upload the alarm’s file only. At present, the MDVR supports I/O, G-
sensor, Motion detection.
46
47
8.3. Check the status
Restart the system first.
Click the WIFI Config to check the download status. If the setting is correct & device is online, and
some videos in the device’s SD/HDD, it will begin to download after some minutes.
48
9. Add multi wifi download services on same server
9.1. Description
Sometimes we will need to link multiple SSID with download server on same server PC, but
CMS Server supports to link one download service Download Server with only one SSID
Download Site in default. We can follow the steps in the manual to link multiple SSID with
the same server PC.
The number 2 means to run 2 WIFI download services on current server. You can change it to
another number if you need to run more WIFI download services. Usually one WIFI download
service will link with one SSID.
49
******************************************************
Ignore the info here if you only need to add wifi download services.
If you need to add other services and wifi download services at same time, you can add the
description like below:
[COUNT]
GPSDownSvr=2
GPSStorageSvr=3
This means to run 2 wifi download services and 3 storage services on current server.
Services description:
**************************************************************************
50
9.3. Restart CMS server to run the new service
Click Exit System to exit CMS server, and double click on CMSServer Control to run it again.
Then you will see the service we added.
51
1. Go to CMS Server control panel, select the new added service, choose Service
Config to set it.
2.Set a new ServerID in Register Parameters for the service, and set new ports in
Network Parameters for the service.
Please make sure the new ports are not occupied by other programs on server PC.
Every new added service will need new Server ID and new ports.
2. Login server management page,go to Server -- Download Server to add a new download
server for the new added download service. Save the changes.
Tips :If we add more download services, we will need to add more download server.
IDNO:Please set a new ID for the new server.
Download Site:Choose a SSID to link it with the new download server.
LAN Address:Please set LAN IP of server.
Wi-Fi Address(Device):Please set WAN address of the server. Please use LAN IP if the
server is not used on Internet.
WAN Address(Device)2:Please set WAN address of the server. Please use LAN IP if
the server is not used on Internet.
WAN Port(Device):Please use same port we have set for the new service in CMS Server
control panel.
WAN Address(Client)1:Please set WAN address of the server. Please use LAN IP if the
server is not used on Internet.
WAN Address(Client)2:Please set WAN address of the server. Please use LAN IP if the
server is not used on Internet.
WAN Port(Client):Please use same port we have set for the new service in CMS Server
control panel.
52
2. The server will be online automatically and service in CMS server control panel will be
running.
53
9.5. Forward ports for new added services
Please open ports we added for new services with TCP&UDP in firewall/router to make sure
the server can be accessed from Internet.
54
3.Open Web&FTP configure, tick enable Https, choose port and enter certification password, click OK.
4.After web service run success, you can use web link access it.
Https://domain name:port
55
11. WIFI Download server cascade
Sometimes, we need local download server to save the files except for a main server. For example,
you have a main server in the cloud, and also want to save the files directly in local server which is
closed to vehicles.
1. Install the sub-server on the site, change the WIFI download parameters.
Attention: sub-server also need static WAN and LAN IP(If it’s deployed in the router) address.
A.Just keep WIFI download server, watchdog running , Stop other programs.
B.Login server IP, should be the Main-server’s WAN IP.
C.Server ID: Must be same with the main server.
D.Forward the ports 6605, 6609, 6610 on the router.
Tips: If you just need to test this function in the same router, should change the WIFI download ports
with other ,such as 7709, 7710.
Attention:
1. If the sub-server is a independence WAN IP, input the sub-server’s WAN IP in all blanks.
2. If the sub-server has a fixed LAN IP, please input the LAN IP in the LAN Address, and input WAN
IP in other blanks.
56
3. Restart the WIFI Download server in the sub-server .
4. Check the download status in WIFI Download Configuration.
57