Professional Documents
Culture Documents
P L A T E
&
F R A M E
P L A T E
&
F R A M E
Tranter PHE is a global heat transfer company with representatives around the world. We have
been at the forefront of plate heat exchanger technology for over 60 years and are a part of Dover
Corporation—a multibillion dollar, NYSE-traded, Fortune 200 diversified team of companies—offering
proprietary products and components for industrial and commercial applications around the world.
I S O 9 0 0 1 C E R T I F I E D
Plate & Frame
Heat Exchanger Technology
Tranter’s commitment to superior plate- Plate & Frame For Due to its high efficiency, the
type heat exchanger design has established Maximum Efficiency SUPERCHANGER unit can handle
it as a leader in the selection and specifi- temperature approaches of less than 2°F.
cation of a plate and frame heat exchanger The SUPERCHANGER heat exchanger It also offers “U” values significantly
for maximum performance and economy. is designed to provide maximum efficiency greater (> 1500 Btu/hr ft2 °F) than other
in transferring heat from one liquid to exchangers, due to the unique turbulence
Tranter, inc. has been in the forefront of another, or from steam to liquid. created by its corrugated plates, which
heat transfer technology, and has solved
It consists of a series of gasketed, eliminates stagnant areas in liquid flow
thousands of heat transfer problems in
embossed metal plates arranged alternately and promotes maximum heat transfer.
a variety of industries. Our complete
and bolted together between end frames This translates to a less expensive and
engineering and manufacturing expertise
to form channels through which hot and more compact heat exchanger, occupying
brings you equipment that meets the
cold media flow. The hot fluid flows on much less space.
highest standards of design excellence
and quality workmanship. one side of the plate while the cold fluid The unit’s velocity profile and induced
flows on the other, with the plate itself turbulence causes dirty product deposits
Our specialists stand ready to show providing the most effective to be continually removed from the heat
you how Tranter heat transfer
transfer surface during operation, thereby
technology can
reducing fouling.
2 provide efficient,
cost-effective Effective use of the
solutions to problems plate’s turbulence
arising from increased pro- can be made with
duction and budget demands. in-place cleaning
which allows back-
Sizing and specifying a
flushing water or
heat exchanger to efficiently
pumping cleaning
and economically satisfy a
solutions into the
specific duty is somewhat more
unit without disas-
complicated than commonly
sembling. Units can
envisioned. Many variables—
also be taken apart for
design pressure, flow rate,
cleaning the plate surfaces. Plates
pressure drop, nozzle
can be electropolished to make cleaning
velocity and material
means to easier, either manually or in-place.
compatibility, among
others—must be con- transfer heat from
sidered before the optimal unit one fluid to the other. Gaskets
for the specific requirement can mounted on the plates seal the
be determined. channels and provide flow direction.
The large SUPERCHANGER units shown here Primary power applications involve cooling of Cooling bleach solutions, digester heat recovery,
cool closed-loop water which is used in cooling condensate, turbine bearing oil, ash handling cooling white water and heat recovery from boiler
automatic welding machines. Other major automotive systems, oil sumps, etc. Many duties include blow down are some of the numerous applications
applications are heating wash, phosphate and secondary exchangers to a central cooling unit. in the pulp and paper industry.
rinse solutions, and temperature control of
paint, plating solutions, etc.
Precise Plate Selection
6
GCP-Low NTU UXP-Series
GFP GFP GCP-High NTU
Series Herringbone
Wide-Gap Series Washboard Series High NTU
UXP-Series Plates Mixed Plates furnishes the best overall system efficiency
and results in a lower cost unit.
UXP-Series plates have corrugations in In many applications, better heat transfer
a traditional herringbone or chevron performance can be achieved by units GXD plate technology utilizes two
pattern, offering a variety of thermal with mixed High and Low NTU plates assymetrical plate patterns to create six
lengths. They are used in a multitude having varying angles. In these duties, different flow channel configurations.
of applications, and are generally more fewer plates are required because thermal And, with more than one hundred
efficient with relatively clean solutions and hydraulic requirements can be available plate combinations, we can
due to greater induced turbulence almost exactly matched. better fit your specific heat transfer needs.
within the flow stream.
GXD-Series Plates A Variety of Sizes
SXP-Series Plates Especially when flows are unbalanced and The plate data chart on page 8 illustrates
SXP-Series plates complement UXP the allowable pressure drops are reasonably the multitude of sizes available in
plates. Their tighter pitch and smaller close, Tranter utilizes its GXD-Series plate each series.
interspace clearance generate greater “U” designs. Better accommodation of unequal
values and higher pressure ratings. flow rates, which optimizes pressure drop
and heat transfer rates for both fluids,
Illustrations shown here are not drawn to scale. NTU = thermal length.
GFP-Wide-Gap Plates Defeat
Clogging and Downtime
Plates are available in three models– Standard plate thickness
designated GFP-050, GFP-100 and is .8mm, with a 1mm
GFP-180, with heat transfer areas of option available.
5.3, 9.0 and 16.8 sq. ft., respectively.
A SUPERCHANGER heat exchanger Gasket Materials
utilizing Wide-Gap plates economical- NBR or EPDM gaskets
ly recovers heat from hard-to-handle are offered as standard.
waste streams in a variety of indus- GFP-057
Maximum temperature
tries, including pulp and paper, sugar with NBR or EPDM
processing, alcohol production, grain gaskets is 250°F.
processing, chemicals, textiles and
ethanol distilling.
The plate design is also excellent for
low pressure steam since the wide gap
will more readily accommodate the
high volumetric flows typical of low
8 pressure steam applications.
GFP-097
Plate Materials
Standard materials are 304SS,
316SS and titanium. Custom
requirements for Hastelloy C-276,
254SMO or other alloys which can
be cold formed can also be accom-
modated.
GFP-187
Key: H = High-NTU plates S = Same direction M = Mixed high- and low-NTU plates D = Different directions L = Low-NTU plates
Plate Model
GC-205 GC-505 GC-605
GC-206 GC-506 GC-606
Specification GC-207 GC-507 GC-707
Heat Transfer
2.8 5.92 5.92
Area, ft2
Plate Width
15.2 19.9 27.75
in.
Plate Length
37.1 53.4 47.1
in.
0.5 mm = 185 185 185
Maximum ASME Code
0.6 mm = 230 230 230
Pressure Stainless (PSI)
0.7 mm = 300 300 300
0.5 mm = 100 100 100
Maximum ASME Code
0.6 mm = 175 175 175
Pressure Titanium (PSI)
0.7 mm = 230 230 230
A Closer Look at Double-Wall
and GW-Series Plates
Double-Wall Plates (GD) The possibility of intermixing is virtually elimi-
The double-wall plate heat exchanger nated by nesting two plates together and welding Some popular industries and
is intended for use where the two the port holes. applications that utilize GD-Series
fluids on each side of the plates should plates include:
not mix—due to possible contamina- • pharmaceutical industry
tion or an undesirable reaction.
• food industry
If a leak through one of the plates or Fluid 1 • district heating
around one of the gaskets should Gaskets • cooling of transformer oil
occur, the fluid is vented to the out- • deionized water
side of the heat exchanger before any
intermixing can occur. The leak is
immediately evident even before Fluid 2
disassembly of the heat exchanger.
Heat Transfer
1.72 (0.16) 9.69 (0.90) 9.26 (0.86) 19.58 (1.82)
Area, ft2 (m2)
Plate Width
9.84 (250) 26.45 (672) 26.22 (666) 41.10 (1044)
in. (mm)
Plate Length
37.40 (950) 68.86 (1749) 71.46 (1815) 89.65 (2277)
in. (mm)
Maximum
2"* 8" 8" 14"
Connection Size
Maximum
212 400 400 Not fixed
Number of Plates
* Can use 3" if one side is elbowed 90˚.
A Wide Range of Choices
The broad range of materials currently Plate Choices nickel, alloys 825, 20Cb-3, B-2, C-276,
available for SUPERCHANGER plate and a variety of other materials.
and frame heat exchangers provides a SUPERCHANGER plates are pressed
in Wichita Falls, Texas, and produced in Plates are available in sizes ranging from
diverse selection for meeting an excep-
virtually any metal that can be cold- .34 sq. ft. to 36.27 sq. ft., and in thick-
tionally wide variety of individual needs.
formed, including stainless steels (304, nesses from 0.5mm (0.020 in.) to
316, 317, etc.), titanium, Monel®, 1.0mm (0.039 in.).
Heat Transfer Area .34 .64 .75 .75 .86 .91 .94 1.29 1.29 1.45 1.46
Per Plate(ft2)
Model GWP-080 GXD-018 UXP-100 GCP-026 GXD-026 GFP-030 GXD-037 UXP-200 GXD-042 GFP-050 GCP-051
Heat Transfer Area 1.73 1.94 2.15 2.80 2.91 3.38 3.98 4.04 4.74 5.32 5.81
Per Plate(ft2)
Model GXD-051 GCP-060 GXD-060 UXP-060 GXD-064 SXP-070 GFP-080 UXP-400 GFP-100 GCD-010 GWP-500
12
Heat Transfer Area 5.92 5.92 6.03 6.10 6.89 7.24 7.64 8.18 8.96 8.97 9.26
Per Plate(ft2)
Model GWP-400 SXP-400 GXD-085 GXD-091 GXD-100 UXP-110 GXD-118 SXP-140 GXD-140 GXD-145 GFP-180
Heat Transfer Area 9.69 9.69 9.80 9.80 10.87 11.79 12.70 13.69 15.72 16.47 16.80
Per Plate(ft2)
Model UXP-800 GWP-900 GXD-180 GXD-205 GLP-230 UXP-960 GXD-265 GLP-330 GXD-325 GLP-430
Heat Transfer Area 18.30 19.58 20.56 23.04 25.50 28.74 29.71 35.19 36.27 44.90
Per Plate(ft2)
Frame Choices
Tranter offers both solid and reinforced end frames
which can be ASME Code stamped up to a design pressure
of 400 psig. Standard frames are constructed with baked epoxy
enamel painted carbon steel, zinc plated tightening bolts and
aluminum shrouds. Compact versions with no support column
are available on some units. Stainless steel tightening bolts and
connecting frames are optional.
Nozzle Choices
Tranter offers ASA loose flange type
nozzles as standard on reinforced end
frames, and studded port connections
as standard on solid end frames.
In addition, threaded pipe, sanitary
and Victaulic connections are available.
Flanged
Studded port
Threaded pipe
Gaskets on GXD-Series
plates are located in
the neutral axis.
No Cross-contamination Sanitary
With Gasket/Bleed
Port Design
Due to the gasket/bleed port design, fluids Gaskets on all other
plates are located in
will not intermix (other than a through- tapered grooves.
plate failure) when the plates are properly
gasketed and the unit is assembled in
accordance with prescribed instructions
and design specifications. Liquid flowing Flanged Nozzle Cross Section
Fully glued or SPOTGLUED® gaskets,
on the surface of each plate flows on the
which require less downtime to install, Loose Lap
inside of the boundary gasket. Should Joint Flange
remove or clean, can be specified for most
one of the liquids leak beyond a boundary
units. SUPERLOCK® glueless gaskets
gasket, it will flow to the outside of
are available on several models.
the unit through the bleed ports, Continuous
MSS Stub End
preventing intermixing. Pressure
Weld
Gasket Choices
SUPERCHANGER plate gaskets are Seal Plate
specially molded elastomers to assure
Tack Welds
superior performance.
SPOTGLUED gaskets SUPERLOCK gaskets End Frame
World-class Manufacturing,
Superior Testing and Servicing
ISO 9001 Certification Tranter can custom-design a unit with
the specific number, size, material and
Tranter–Texas Division is ISO certified, configuration of plates to meet your
adhering to the highest standards in exact needs. If your needs change, the
designing, manufacturing and testing unit can be easily modified by simply
SUPERCHANGER plate and frame adding or removing plates.
heat exchangers.
SUPERCHANGER heat exchangers Each Unit is Thoroughly
are computer designed and analyzed Tested
by technical specialists who generate a
After assembly, each SUPERCHANGER
complete proposal providing optimum
unit is hydrostatically tested, both single
designs and alternatives. Quotations are
and double sides, at the required
prepared on a timely basis with all tech-
test pressures.
nical information required for evaluation. GTAW and GMAW welding processes are utilized on
A number of additional tests, including nozzles and end frame reinforcing bars, respectively.
SUPERCHANGER unit components
process simulation and fatigue tests, can
are manufactured by state of the art
be performed to guarantee a unit fills your
14 production technology, and assembled
strict operational requirements.
by the most knowledgeable, experienced
craftsmen using the best equipment and
fabrication techniques available.
Draw depths of
plate chevrons
are meticulously
monitored.
16
Data Required
Customer Phone
Address Fax
Specific Gravity
2nd Temperature Cp @ ˚F Cp @ ˚F
Temperature In ˚F
Temperature Out ˚F
Note: For fluids other than water or steam, properties should be furnished for FASTEST and most ACCURATE sizing.
Notes:
Notes:
I S O 9 0 0 1 C E R T I F I E D
Tranter PHE, Inc. ▲ Texas Division ▲ P.O. Box 2289 ▲ Wichita Falls, Texas 76307
(940) 723-7125 ▲ Fax (940) 723-5131
http://www.tranterphe.com
Tranter, Inc. also manufactures PLATECOIL® prime surface, MAXCHANGER® compact all-welded plate,
ULTRAMAX™ all-welded plate, WIDEMAX™ all-welded wide-gap plate and SUPERMAX™ plate and shell.