Professional Documents
Culture Documents
Pantalla anterior
Bienvenido: u05agxt
Producto: NO SE HA ESCOGIDO NINGUN EQUIPO
Modelo: NO SE HA ESCOGIDO NINGUN EQUIPO
Configuración: NO SE HA ESCOGIDO NINGUN EQUIPO
Instrucción Especial
Hose Inspection Form {0374, 0599, 5057, 5057}
Número de medio -M0069606-00 Fecha de publicación -10/03/2016 Fecha de actualización -10/03/2016
i06618775
Caterpillar Products
All Machines
Work Tool
All
Introduction
Do not perform any procedure in this Special Instruction until you have read the information and you understand
the information.
Safety Section
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Personal injury can result from hydraulic oil pressure and hot oil.
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp&calledpage=/s… 1/14
11/12/2019 Búsqueda avanzada de texto completo - M0069606 - Hose Inspection Form {0374, 0599, 5057, 5057}
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
Personal injury or death can result from improperly checking for a leak.
Illustration 1 g00104545
Prevent the machine from movement. Park the machine on a level surface.
Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before you
service the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar
dealer.
This inspection form is intended to assist with identification and prioritization of failure modes associated with
hose assemblies and to increase your ability to identify and proactively resolve issues in order to minimize fluid
loss, machine downtime and avoid environmental impact.
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp&calledpage=/s… 2/14
11/12/2019 Búsqueda avanzada de texto completo - M0069606 - Hose Inspection Form {0374, 0599, 5057, 5057}
Various site conditions, the environment and machine age should always be considered when inspecting hose
assemblies.
When performing a machine walk-around, always follow local safety guidelines and wear the appropriate PPE.
Prior to inspection, turn off equipment power and release pressure from the accumulators along with the system
pressure. Make sure equipment is in a safe or neutral position, retract all cylinders, drop the load, and allow
enough time for cool down. Chock tires as necessary. NEVER touch a hydraulic hose that is under pressure.
Replacement indicator 1
Replacement indicator 2
Hose assembly is showing early signs of fatigue or wear and risk of failure is low.
Note: Where possible take photos to highlight areas of concern and attach to report.
Cover has worn through or has been damaged with exposure of the reinforcement layer.
Replace hose assembly urgently to ensure safety and minimize potential fluid loss/ contamination, machine
downtime and negative environmental impact.
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp&calledpage=/s… 3/14
11/12/2019 Búsqueda avanzada de texto completo - M0069606 - Hose Inspection Form {0374, 0599, 5057, 5057}
Illustration 2 g06052914
Illustration 3 g06052931
Illustration 4 g06052934
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp&calledpage=/s… 4/14
11/12/2019 Búsqueda avanzada de texto completo - M0069606 - Hose Inspection Form {0374, 0599, 5057, 5057}
Illustration 5 g06052939
Illustration 6 g06052947
Illustration 7 g06052949
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp&calledpage=/s… 5/14
11/12/2019 Búsqueda avanzada de texto completo - M0069606 - Hose Inspection Form {0374, 0599, 5057, 5057}
Illustration 8 g06052951
Illustration 9 g06052952
Illustration 10 g06052970
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp&calledpage=/s… 6/14
11/12/2019 Búsqueda avanzada de texto completo - M0069606 - Hose Inspection Form {0374, 0599, 5057, 5057}
Illustration 11 g06052974
Illustration 12 g06052979
Illustration 13 g06052982
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp&calledpage=/s… 7/14
11/12/2019 Búsqueda avanzada de texto completo - M0069606 - Hose Inspection Form {0374, 0599, 5057, 5057}
Illustration 14 g06052985
Illustration 15 g06052988
Illustration 16 g06052995
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp&calledpage=/s… 8/14
11/12/2019 Búsqueda avanzada de texto completo - M0069606 - Hose Inspection Form {0374, 0599, 5057, 5057}
Illustration 17 g06053003
Cover has minor cuts or cracks. Reinforcement is not exposed. Hose is still flexible.
Hose assembly is weeping fluid (e.g. through cover, around clamps, at connection points, etc.,).
Cover is blistered.
Protect hose with suitable guarding, re-route as needed, replace O-rings, clamps etc. Inspect before every shift to
ensure safety and minimize potential fluid loss/contamination, machine downtime and negative environmental
impact.
Illustration 18 g06053012
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp&calledpage=/s… 9/14
11/12/2019 Búsqueda avanzada de texto completo - M0069606 - Hose Inspection Form {0374, 0599, 5057, 5057}
Illustration 19 g06053014
Illustration 20 g06053021
Illustration 21 g06053025
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp&calledpage=/… 10/14
11/12/2019 Búsqueda avanzada de texto completo - M0069606 - Hose Inspection Form {0374, 0599, 5057, 5057}
Illustration 22 g06053032
Illustration 23 g06053035
Illustration 24 g06053036
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp&calledpage=/… 11/14
11/12/2019 Búsqueda avanzada de texto completo - M0069606 - Hose Inspection Form {0374, 0599, 5057, 5057}
Illustration 25 g06053039
Illustration 26 g06053042
Illustration 27 g06053044
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp&calledpage=/… 12/14
11/12/2019 Búsqueda avanzada de texto completo - M0069606 - Hose Inspection Form {0374, 0599, 5057, 5057}
Illustration 28 g06053046
List hoses below that need attention. Rate each hose based on severity / impact to safety, machine operation and
environmental impact.
Table 1
Hose Assembly Part Group Number or Rating Comments (Recommended
Number Location (Level) Actions)
Table 2
Machine Model: Date:
Machine ID: Machine Serial #:
Location: Service Meter:
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp&calledpage=/… 13/14
11/12/2019 Búsqueda avanzada de texto completo - M0069606 - Hose Inspection Form {0374, 0599, 5057, 5057}
Table 3
Comments:
Copyright 1993 - 2019 Caterpillar Inc. Wed Dec 11 2019 16:21:08 GMT-0500 (hora estándar de Colombia)
Todos los derechos reservados.
u05agxt
Red privada para licenciados del SIS.
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/fulltext/fulltextheaderinfoframeset.jsp&calledpage=/… 14/14