Professional Documents
Culture Documents
Chapter 8 Exercise 1
1. Open AutoCAD 2012 with a double-click on its shortcut icon in the Windows desktop.
2. Open the Imperial drawing.
3. Construct the three-view drawing as shown in Fig. 8.20, but change the front view to a sectional view A-
A.
4. At the command line enter h and when the Hatch ribbon appears left-click Ans131 in the Pattern
panel. The command line prompts asks for an internal point to be picked. Pick the two areas to be
hatched. When the hatching takes place right-click.
7. The resulting three-view drawing with the front view in section is shown below.
8. Place memory stick in a USB port and save your drawing to the file name 8_Exercise01.dwg
9. Left-click the Close button of the drawing window.
Chapter 8 Exercise 2
1. Open AutoCAD 2012 with a double-click on its shortcut icon in the Windows desktop.
2. Open the template acadiso.dwt.
3. Following a similar procedure as for Exercise 1 construct the required drawing - shown on Page 2.
4. Save your drawing with the file name 8_Exercise02.dwg to your memory stick.
5. Left-click the Close button of the drawing window.
Material accompanying Introduction to AutoCAD 2012, ISBN 9780080969473. Copyright © 2011, Alf Yarwood. Published
by Elsevier Ltd. All rights reserved.
Page 2
Chapter 8 Exercise 3
1. Open AutoCAD 2012 with a double-click on its shortcut icon in
the Windows desktop.
2. Open the template acadiso.dwt.
3. Open the Layer Properties Manager palette with a click on
the Layer Properties icon in the Home/Layers panel.
4. In the dialog left-click the Delete Layer icon and delete all layers
other than layer 0. The layers will be deleted
when the OK button of the dialog is clicked.
5. Make new layers, all with lines Continuous:
HATCH01: blue and HATCH02: magenta.
6. Construct the drawing as described by the stages
in Fig. 8.22.
7. Save your drawing with the file name
8_Exercise03.dwg to your memory stick.
8. Left-click the Close button of the drawing
window.
Material accompanying Introduction to AutoCAD 2012, ISBN 9780080969473. Copyright © 2011, Alf Yarwood. Published
by Elsevier Ltd. All rights reserved.
Page 3
Chapter 8 Exercise 4
1. Open AutoCAD 2012 with a double-click on its shortcut icon in the Windows desktop.
2. Open the template acadiso.dwt.
3. Make new layers, all with lines Continuous: Layer 1: black: HATCH01: green: HATCH02: cyan:
HATCH03: red: HATCH04: blue.
4. Construct the outlines of the drawing.
5. Hatch as required.
6. Save your drawing with the file name 8_Exercise04.dwg to your memory stick.
7. Left-click the Close button of the drawing window.
Chapter 8 Exercise 5
1. Open AutoCAD 2012 with a double-click on its shortcut icon in the Windows desktop.
2. Open the template acadiso.dwt.
3. Delete all layers other than layer 0 and make new layers, all with Continuous linetype: Roof01: red;
Roof02: Magenta; Roof03: magenta; Wall01: color 40; Wall02: colour 241; Wall03: colour 8.
Material accompanying Introduction to AutoCAD 2012, ISBN 9780080969473. Copyright © 2011, Alf Yarwood. Published
by Elsevier Ltd. All rights reserved.
Page 4
Chapter 8 Exercise 6
1. Open AutoCAD 2012 with a double-click on its shortcut icon in the Windows desktop.
2. Open the template acadiso.dwt.
3. Open the Layer Properties Manager palette and delete all layers other than layer 0. Make new layers,
all with Continuous linetype; Roof: magenta; Wall: red; Hatch: colour 8.
4. Construct the outlines of the drawing on layer 0.
5. Make the layer Hatch current and construct plines as shown (next page).
6. Make the layer Wall current and make sure the Outer method is on in the Options panel flyout of the
Hatch ribbon, fill the area as shown with hatching of a pattern BRICK to a scale of 0.7.
7. Turn the layer Hatch off.
8. Make the layer Roof current. Open the Hatch panel again and hatch the roof areas using the pattern
ANGLE to a scale of 1.
9. Save your drawing with the file name 8_Exercise06.dwg to your memory stick.
10. Left-click the Close button of the drawing window.
Material accompanying Introduction to AutoCAD 2012, ISBN 9780080969473. Copyright © 2011, Alf Yarwood. Published
by Elsevier Ltd. All rights reserved.
Page 5
Material accompanying Introduction to AutoCAD 2012, ISBN 9780080969473. Copyright © 2011, Alf Yarwood. Published
by Elsevier Ltd. All rights reserved
Page 6
Chapter 8 Exercise 7
1. Open AutoCAD 2012 with a double-click on its shortcut icon in the Windows desktop.
2. Open the template acadiso.dwt.
3. Follow the instructions given in Exercise 7 of Chapter 8 with the exception that a new layer color magenta
is created on which the drawing is constructed.
4. Save your drawing with the file name 8_Exercise07.dwg to your memory stick.
5. Left-click the Close button of the drawing window.
Additional exercises
Material accompanying Introduction to AutoCAD 2012, ISBN 9780080969473. Copyright © 2011, Alf Yarwood. Published
by Elsevier Ltd. All rights reserved.
Page 7
Material accompanying Introduction to AutoCAD 2012, ISBN 9780080969473. Copyright © 2011, Alf Yarwood. Published
by Elsevier Ltd. All rights reserved.
Page 8
Material accompanying Introduction to AutoCAD 2012, ISBN 9780080969473. Copyright © 2011, Alf Yarwood. Published
by Elsevier Ltd. All rights reserved.
Page 9
Material accompanying Introduction to AutoCAD 2012, ISBN 9780080969473. Copyright © 2011, Alf Yarwood. Published
by Elsevier Ltd. All rights reserved.