You are on page 1of 2

Department of Education

Region IX, Zamboanga Peninsula


Division of Zamboanga del Sur
TORIBIO MINOR NATIONAL HIGH SCHOOL
Summative test: EIM-11
Name and Section: ____________________________________Date: ______________
Subject: ________________________________Score: _______
TEST 1: MULTIPLE CHOICE
DIRECTION: Circle the letter with a correct answer
1.What is the unit measure of electric current?
A. Kilowatt B. Ampere C. Volts D. Ohms
2. A protected device used to automatically blows and cuts the current when trouble in the circuit or overload occurs.
a. switch B. resistance C. circuit breaker D. Capacitance
3. Which material use to cover electric wires which may be made from plastic rubber or asbestos.
A. Conductor B. Insulator C. Plastic D. Ceramic
4. a measuring tool use to measure the length of an object in centimeter and in inches.
A. wire gauge B. ruler c. pull push rule d. wire stripper
5. The instrument use to measure the amount of electrical current intensity in a circuit.
A. voltmeter B. ammeter C. micrometer D. ohmmeter
6. A pocket sized tool used to test the line wire or circuit if there is current in it.
A. test light B. wire gauge C. multi –tester D. pull push rule
7. It is used to measure voltage , resistance and current of the circuit.
A. voltmeter B. micrometer C. ohmmeter D. ammeter
8. This has a cross tip resembling a positive sign used to drive screws with cross slots heads.
A. Philips Screw Driver B. test light C. allen screw driver D. stubby screw
9. This is used for cutting and holding fine wires .
A. Long Nose Pliers B. combination pliers C. side cutting pliers D. wire stripper
10. The needle shape pointer rod that moves over the scale of a meter...
A. Pointer B. Range selector knob C. test probe D. scale
Test II; DIRECTION: Fill the blank with the correct answer.
_____________________11. A rectangular shape metallic or plastic material in which flush type
convenience outlet and switch are attached.
___________________12. A tool used in driving or pulling out nails.
___________________13. Electrical materials used to hold and anchor electrical conduits in its proper position.
___________________14. An instrument used to measure the amount of electrical current intensity in a circuit.
___________________15. Is used to zero in the pointer before measuring resistance.
___________________16. The standard number or diameter of wire for receptacle and convenience outlet layout.
___________________17. Defines the relationship between voltage current and resistance.
___________________18. An instrument used to measure the diameter of a magnetic wire.
___________________19. A device acts as a convenient source of electrical energy for current consuming appliances.
___________________20. A device inserted to convenience outlet to conduct electric current.

TEST III- ENUMERATION:


1-5. Give 5 parts of a multi-tester
6-9. Give four examples of Personal Protective equipment (PPE )
10-12. 3 types of hammer
13-17. Give 5 examples of electrical tools
18-20. give 3 examples of measuring tools and instrument.

You might also like