Professional Documents
Culture Documents
MetalMesh Isolators PDF
MetalMesh Isolators PDF
1200 Series
MET-L-FLEX Bushings
9300 Series Mounts
Cablemount Series
1200 MOUNT SERIES (1201/1202)
A P P L I C AT I O N S
• Electronic, pneumatic
and hydraulic devices
• Vehicular mounted equipment
• Industrial & military packaging
• Shipboard electronics
• Communications equipment
F E AT U R E S
• Axial to radial stiffness of 3:1 The high damping and nonlinear characteristics of MET-L-
• Rugged, reliable construction FLEX load carr ying element and limiter pads in the all metal
1201 and 1202 Series Isolators assure controlled shock and
• Stainless steel cushions
vibration isolation protection for mounted equipment.
• Vertical natural frequency
as low as 10 Hertz
Specifications
BENEFITS
• Natural Frequency 15-20 Hertz
• Isolators are not effected
by oil, dust water, ozone • Transmissibility at resonance 3.0-4.0
or atmospheric pressure • Resilient Element Metal Mesh
• High damping characteristics • Standard Materials Aluminum
• Weight 1201 = 1.5 oz.
LOAD RANGE
1202 = 4.2 oz.
• 1201 Series = 3 load ratings
to 10 lbs. per mount
Environmental Data
• 1202 Series = 4 load ratings • Operating temperature ranges of -130˚F to +375˚F.
to 40 lbs./mount
• Applicable to military standards.
• Resistant to dust, oils, oil-based solvents, salt water and sand.
LOAD RATING
Dimpled Non-Dimpled Load
Mounting Mounting Rating (lbs.)
1201-1 1201-1A 1-3
1201-2 1201-2A 2.5 - 5.5
1201-3 1201-3A 5 - 10
1202-1 1202-1A 2.5 - 6
1202-2 1202-2A 5.5 - 12.5
1202-3 1202-3A 10 - 20
1202-4 1202-4A 18 - 40
A P P L I C AT I O N S
• Shipboard, marine and
vehicle applications
• Fans & blowers
• Aerospace & military applications
• Motor/generator sets
F E AT U R E S
• Wide temperature range Barr y MET-L-FLEX Bushings are used wherever environmen-
• Metal mesh construction tal conditions could damage or destroy conventional
elastomeric bushings. They are used in the assembly
• Axial to radial stiffness of 0.8:1
and interconnection of mounting and structural elements.
• Non-linear spring rate
BENEFITS Specifications
• Isolators are not effected by oil, dust, • Natural Frequency 230 Hertz Vertical
water, ozone or atmospheric pressure
• Transmissibility at resonance 5.5
• Excellent vibration isolation
• Resilient Element Metal Mesh
• Rapid elimination of shock without
• Standard Materials Stainless Steel
damaging rebound
• Weight See Table
• No distortion set under sustained loads
Environmental Data
• Operating temperature ranges of -130˚F to +500˚F
(-90˚C to +260˚C).
• Resistant to dust, oils, oil-based solvents, extreme
temperatures, salt water and sand.
MET-L-FLEX BUSHINGS
Part # A B C D E F WEIGHT RECOMMENDED LOAD*
MG30425-1 .14 11/32 1/4 7/64 1/16 1/8 .03 10 lbs.
MG30428-1 .16 25/64 9/32 9/64 1/16 1/8 .05 12 lbs.
MG30431-1 .19 7/16 5/16 9/64 1/16 1/8 .06 16 lbs.
MG30441-1 .25 9/16 13/32 11/64 5/64 5/32 .11 27 lbs.
MG30450-1 .31 11/16 1/2 7/32 3/32 3/16 .21 42 lbs.
MG30462-1 .38 7/8 5/8 17/64 1/8 1/4 .42 64 lbs.
A P P L I C AT I O N S
• Airborne electronics
• Ideal for use in applications
where attitude of equipment
inoperation may vary, such
as missiles
F E AT U R E S
• Axial to radial stiffness of 1:1 Barr y 9300 Series isolators are versatile, double acting
• Rugged, reliable construction mountings for installation with electronic & electro-
mechanical equipment requiring protection against the
• All attitude isolators
vibration and shock encountered in airborne operations.
BENEFITS
• Isolators are not effected by oil, Specifications
dust, water, ozone atmospheric
pressure or temperature
• Natural Frequency 12-15 Hertz
• Transmissibility at resonance 4.0 Max
• Ideal for center of gravity type
suspensions • Resilient Element Springs & Metal Mesh
• Standard Materials Aluminum Housing
LOAD RANGE • Weight 9301 = 1.25 oz.
• 9300 Series = 17 load ratings 9302 = 2.75 oz.
to 16 lbs. per mount 9303 = 4.75 oz.
Environmental Data
• Operating temperature ranges of -130˚F to +375˚F
(-90˚C to +190˚C).
• Resistant to dust, oils, oil-based solvents, salt water and sand.
DIMENSIONS (INCHES)
Part # Load Range A B C D E F G H I J
9301-1 .5 - 1 lbs. 15/16 1 1/4 1 10-32 .141 3/64 51/64 11/2 5/16 3/8
9301-2 1 - 2 lbs.
9301-3 2 - 3 lbs.
9302-1 1-2 lbs. 1 7/32 1 3/4 1.375 1/4-20 .196 3/16 1 3/32 2 1/8 9/16
9303-2 3 - 5 lbs.
9303-3 5 - 7 lbs.
9303-4 7 - 10 lbs.
9303-7 10 - 13 lbs.
9304-1 1 - 2 lbs. 1 15/16 2 1/4 1.750 5/16 -24 .196 3/16 1 1/4 2 5/16 5/16 1/2
9304-2 7 - 11 lbs.
9304-3 11 - 16 lbs.
9304-4 4.5 - 7 lbs.
9304-5 2 - 3 lbs.
9304-6 3 - 4.5 lbs.
A P P L I C AT I O N S
• Shipboard navigational,
fire control & communications
equipment
• On/Off road vehicles
• Motor/Generator sets
• Extreme temperature
environments, such as
engine compartments
F E AT U R E S
• All-attitude mounting Cablemounts are designed to perform efficiently without
• Fail-safe design material or performance degradation in extremely hostile
environments. They are operational under wide extremes of
• Available in a wide range of sizes
temperature ranges and resist chemicals, oils and abrasives.
and load ranges for most applications
• High damping
Specifications
BENEFITS
• Natural Frequency 10-20 Hertz
• Performs efficiently without material
• Transmissibility at resonance 3.5
degradation in hostile environments
• Resilient Element Stainless steel cable
• Ideal for use in high temperature
and/or under corrosive conditions
• Standard Materials Aluminum mounting bars
• Many custom versions are available
Consult factory for more information
Environmental Data
• Operating temperature ranges of -400˚F to +700˚F
LOAD RANGE (-240˚C to +370˚C).
• 11 styles to accommodate up
• Applicable to military standards of MIL-STD-167
to 1,500 lbs. per mount (vibration), MIL-S-901 (shock) and MIL-E-16400.
• Resistant to dust, oils, oil-based solvents, salt water and sand.