Professional Documents
Culture Documents
www.pfisterer.co.za info@pfisterer.co.za
25kV AC Local
Clevis/Square Tongue
Item No:54032541
Hook Tongue/Pipe End Fitting Square Tongue/Square Tongue
Item No:54033408 Item No:54032617
Large Round Tongue/Large Round Tongue
Item No:54033393
Clevis/Spade Fitting
Item No:54032553
Approved By
Material Revision
+0.5
+0.5
23 0
23 0
143 61 40
52.0
+0.5
17 0
Technical Data
One minute power frequency withstand voltage, 50Hz, wet = 205 kV
Lightning impulse withstand voltage, 1,2/50, pos. = 384 kV
Arcing distance = 580 mm
Minimum creepage distance = 1476 mm
Specified mechanical load (SML) = 54 kN
Number of sheds = 13
Material of fittings = Steel, h.d.g.
Description Unspecified Weight Substitute for
Weight (approx.) = 5.7 kg Tolerances
0, 1 kg
0,0 0.25
Tongue / Tongue in acc. to Drawing No. Oos London Stand - Off Insulator Assembly 0,00
Angles
0.1
1
Drawn By 22/05/2007 R.N
Material Revision
000
Galvanizing (h.d.g.) acc. to EN ISO 1461 Scale Drawing/Part Number
N.T.S.
144 034-017
This drawing and its contents are
confidential and exclusive property
of PFISTERER (PTY) LTD. No
publications, copies or ditribution
may be made without written concent
by PFISTERER (PTY) LTD. 588
545
41.0
+0.5
R10 0 8.0
61 143 40
+0.50
18 0
52.0
Technical Data
One minute power frequency withstand voltage, 50Hz, wet = 205 kV
Lightning impulse withstand voltage, 1,2/50, pos. = 384 kV
Arcing distance = 580 mm
Minimum creepage distance = 1476 mm
Specified mechanical load (SML) = 54 kN
Number of sheds = 13
Material of fittings = Steel, h.d.g.
Description Unspecified Weight Substitute for
Weight (approx.) = 5.7 kg Tolerances
0, 1 kg
= 0,0 0.25
R.N
Hook / Pipe End Fitting in acc. to Drawing No. Oos London Stand - Off Insulator Assembly 0,00
Angles
0.1
1
Drawn By 22/05/2007
22/05/2007 ALJ
25kV AC, Hook end, Pipe end Checked By
Material Revision
000
Galvanizing (h.d.g.) acc. to EN ISO 1461 Scale Drawing/Part Number
N.T.S.
144 034-019
This drawing and its contents are
confidential and exclusive property
of PFISTERER (PTY) LTD. No
publications, copies or ditribution
may be made without written concent
by PFISTERER (PTY) LTD.
629
545
+0.50 +0.50
18 0 18 0
45.0
143 61 40
52.0
+1
13 0
Technical Data
One minute power frequency withstand voltage, 50Hz, wet = 205 kV
Lightning impulse withstand voltage, 1,2/50, pos. = 384 kV
Arcing distance = 580 mm
Minimum creepage distance = 1476 mm
Specified mechanical load (SML) = 54 kN
Number of sheds = 13
Material of fittings = Steel, h.d.g.
Description Unspecified Weight Substitute for
Weight (approx.) = 5.7 kg Tolerances
0, 1 kg
0,0 0.25
Square Tongue / Square Tongue in acc. to Drawing No. CEE-TNC-24 Stand - Off Insulator Assembly 0,00
Angles
0.1
1
Drawn By 22/05/2007 R.N
25kV AC, Square tongue/tongue Checked By 22/05/2007 ALJ
Material Revision
000
Galvanizing (h.d.g.) acc. to EN ISO 1461 Scale Drawing/Part Number
N.T.S.
144 034-016
This drawing and its contents are
confidential and exclusive property
of PFISTERER (PTY) LTD. No
publications, copies or ditribution
may be made without written concent
by PFISTERER (PTY) LTD.
627
545
+0.50
18 0 +0.50
18 0
45.0
52.0 143 61 40
50.0
+1
13 0
19.0
9.50
Technical Data
One minute power frequency withstand voltage, 50Hz, wet = 205 kV
Lightning impulse withstand voltage, 1,2/50, pos. = 384 kV
Arcing distance = 580 mm
Minimum creepage distance = 1476 mm
Specified mechanical load (SML) = 54 kN
Number of sheds = 13
Material of fittings = Steel, h.d.g.
Description Unspecified Weight Substitute for
Weight (approx.) = 5.7 kg Tolerances
0, 1 kg
0,0 0.25
Clevis in acc. to Drawing No. BBB0430 Stand - Off Insulator Assembly 0,00
Angles
0.1
1
Drawn By 22/05/2007 R.N
Square Tongue in acc. to Drawing No. CEE-TNC-24 25kV AC,Square Tongue / Clevis Checked By 22/05/2007 ALJ
(54032541) Approved By
771
545
+0.50
17 0
52.0
143 61 40
+0.5
23 0
74
One minute power frequency withstand voltage, 50Hz, wet = 205 kV 186
Lightning impulse withstand voltage, 1,2/50, pos. = 384 kV
Arcing distance = 580 mm
Minimum creepage distance = 1476 mm
Specified mechanical load (SML) = 54 kN
Number of sheds = 13
Material of fittings = Steel, h.d.g.
Description Unspecified Weight Substitute for
Weight (approx.) = 8.0 kg Tolerances
0, 1 kg
Stand - Off Insulator Assembly 0,0
0,00
0.25
0.1 Drawn By 22/05/2007 R.N
Spade and Tongue in acc. to Drawing No. BBB0430 25kV AC,Large Round Tongue / Angles 1
Checked By 22/05/2007 ALJ
N.T.S.
144 034-021
This drawing and its contents are
confidential and exclusive property
of PFISTERER (PTY) LTD. No
publications, copies or ditribution
may be made without written concent
by PFISTERER (PTY) LTD.
771
545
+0.50
13 0
51.0
143 61 40
+0.50
18 0
74
M12
Technical Data
One minute power frequency withstand voltage, 50Hz, wet = 205 kV 186
Lightning impulse withstand voltage, 1,2/50, pos. = 384 kV
Arcing distance = 580 mm
Minimum creepage distance = 1476 mm
Specified mechanical load (SML) = 54 kN
Number of sheds = 13
Material of fittings = Steel, h.d.g.
Description Unspecified Weight Substitute for
Weight (approx.) = 8.0 kg Tolerances
0, 1 kg
545
+1
13 0
52.0
143 61 40
+0.50
18 0
45.0
74
Spade in acc. to Drawing No.BBB0430 25kV AC,Square Tongue / Checked By 22/05/2007 ALJ
Spade Fitting Approved By
545
19.0
9.50
50.0
143 61 40
+0.50
18 0
75
M12
Technical Data 186
One minute power frequency withstand voltage, 50Hz, wet = 205 kV
Lightning impulse withstand voltage, 1,2/50, pos. = 384 kV
Arcing distance = 580 mm
Minimum creepage distance = 1476 mm
Specified mechanical load (SML) = 54 kN
Number of sheds = 13
Material of fittings = Steel, h.d.g.
Description Unspecified Weight Substitute for
Weight (approx.) = 8.0 kg Tolerances
0, 1 kg
0,0 0.25
Spade and Clevis in acc. to Drawing No.BBB0430 Stand - Off Insulator Assembly 0,00
Angles
0.1
1
Drawn By 22/05/2007 R.N
25kV AC,Clevis / Spade Fitting Checked By 22/05/2007 ALJ
Material Revision
000
Galvanizing (h.d.g.) acc. to EN ISO 1461 Scale Drawing/Part Number
N.T.S.
144 034-022
This drawing and its contents are
confidential and exclusive property
of PFISTERER (PTY) LTD. No
publications, copies or ditribution
may be made without written concent
by PFISTERER (PTY) LTD.
625
545
+0.5
+0.5 18 0
18 0
143 61 40
50.0
51.0
+0.5
13 0 19.0
9.50
Technical Data
One minute power frequency withstand voltage, 50Hz, wet = 205 kV
Lightning impulse withstand voltage, 1,2/50, pos. = 384 kV
Arcing distance = 580 mm
Minimum creepage distance = 1476 mm
Specified mechanical load (SML) = 54 kN
Number of sheds = 13 kN
Material of fittings = Steel, h.d.g.
Description Unspecified Weight Substitute for
Weight (approx.) = 5.7 kg Tolerances
0, 1 kg
Material Revision
000
Galvanizing (h.d.g.) acc. to EN ISO 1461 Scale Drawing/Part Number
N.T.S.
144 034-018
This drawing and its contents are
confidential and exclusive property
of PFISTERER (PTY) LTD. No
publications, copies or ditribution
may be made without written concent
by PFISTERER (PTY) LTD.
648
401
30
20
+1.5
13 0
95 24
+0.8
18 - 0.8
Technical Data
Material Revision
SML in acc. to IEC 61109
Scale Drawing/Part Number
1220 152
1145
40
+1
13 0
94 110
52.0
130 61
74
45.0 74
+0.5
18 0
M12
186
Technical Data
One minute power frequency withstand voltage, 50Hz, wet = 380 kV
Lightning impulse withstand voltage, 1,2/50, pos. = 744 kV
Arcing distance = 1080 mm
Minimum creepage distance = 2784 mm
Specified mechanical load (SML) = 22.3 kN
Number of sheds = 22
Material of fittings = Steel, h.d.g.
Description Unspecified Weight Substitute for
Weight (approx.) = 13.2 kg Tolerances
0, 1 kg
Material Revision
000
Galvanizing (h.d.g.) acc. to EN ISO 1461 Scale Drawing/Part Number
N.T.S.
144 034-015
Spanish Railway
510
410
Text Text
Placement Placement
132 102
R40
0
49 - 1
+1
21 - 0.5
Date Stamp
35 Placement 33
70
+1 +1
33 0 28 0
0
19 - 1
Technical Data
One minute power frequency withstand voltage, 50Hz, wet = 95 kV
Lightning impulse withstand voltage, 1,2/50, pos. = 250 kV
Arcing distance = 461 mm Date Stamp
Minimum creepage distance = 1238 mm
Specified mechanical load (SML) = 135 kN
Routine test load (RTL) in acc. to IEC 61109
Number of sheds = 10 Description Unspecified
Tolerances
Weight Substitute for
46 116 146
Text Placement
74
35
M16X90 U-Bolt Text Placement Text Placement
70
Nut & Washer
(all stainless steel)
350 (10x35) 40
110
Technical Data
One minute power frequency withstand voltage, 50Hz, wet = 95 kV
Lightning impulse withstand voltage, 1,2/50, pos. = 250 kV
Arcing distance = 454 mm
Minimum creepage distance = 1241 mm
Specified Cantilever load (SCL) = 6 kN
Maximum design cantilever load (MDCL) = 1.5 kN Text Placement Text Placement
Specified tensile load (STL) = 60 kN
Routine test load (RTL) in acc. to IEC 61952
Number of sheds (Large/Small) = 6/5 Date Stamp
Material of fittings = Steel, HDG
Weight (approx.) = 6 kg Description Unspecified Weight Substitute for
Tolerances
0, 1 kg
Product manufactured in accordance to CEI 61952 (IEC 61952) 25kV Silicone insulator 0,0
0,00
0.25
0.1 Drawn By 29/03/2007 N.C
Angles 1
with tube / tube connection Checked By
Material : Approved By
Insulator = E-CR-Glassfibre rod with HTV Silicone rubber housing AM-25-1-1200 (S) Material Revision
004
End Fittings = SG 42 Hot Dip Galvanised Scale Drawing/Part Number
70 46 Rubber inserts
76 PCD
35 Text Text Aluminium
Placement Placement
12
13
108
Clamp Range
18- 22
Date Stamp
Placement
146 116
46 395
502
Date Stamp
Placement
Technical Data
Base Fitting = Steel, Hot Dip Galvanised acc. to EN ISO 1461 C8-200-III (S) Material Revision
002
Head Fitting = Aluminium Alloy with rubber inserts Scale Drawing/Part Number
17.5
74.0
R25
Text Text
Placement Placement
35 25
Technical Data Date stamp
Placement
Text
One minute power frequency withstand voltage, 50Hz, wet = 95 kV Placement Text 12
Placement
Lightning impulse withstand voltage, 1,2/50, pos. = 250 kV 22
Arcing distance = 454 mm
Minimum creepage distance = 1241 mm 12
500
160
395 15
P.C.D 127
70
35
R3
Technical Data
One minute power frequency withstand voltage, 50Hz, wet = 95 kV
Lighting impulse withstand votage, 1,2/50, pos. = 250 kV
Arcing distance = 454 mm
Minimum creepage distance = 1241 mm
Specified Cantilever load (SCL) = 6 kN
Maximum design cantilever load (MDCL) = 2 kN
Specified tensil load (STL) = 40 kN
Number of Sheds (Small/Large) = 5/6
Material of fittings = Steel, HDG
Weight (approx) = 8.0 kg Description Unspecified Weight Substitute for
Tolerances
0, 1 kg
N.T.S.
144 034-011
This drawing and its contents are
confidential and exclusive property
of PFISTERER (PTY) LTD. No
publications, copies or ditribution
may be made without written concent
by PFISTERER (PTY) LTD.
771
545
+0.50
21 0
52
143 61 40
+0.50
18 0
74
M12
Technical Data
One minute power frequency withstand voltage, 50Hz, wet = 205 kV 186
Lightning impulse withstand voltage, 1,2/50, pos. = 384 kV
Arcing distance = 580 mm
Minimum creepage distance = 1476 mm
Specified mechanical load (SML) = 54 kN
Number of sheds = 13
Material of fittings = Steel, h.d.g.
Description Unspecified Weight Substitute for
Weight (approx.) = 8.0 kg Tolerances
0, 1 kg
25kV AC Stand-Off Insulator Assembly 0,0
0,00
0.25
0.1 Drawn By 05/07 R.N
SML in acc. to IEC 61109 c/w Gautrain Tongue / Spade Fitting Angles 1
Checked By 05/07
GT-TE-COM-0022
Galvanizing (h.d.g.) acc. to EN ISO 1461 Approved By
Material Revision
000
Scale Drawing/Part Number
126
315
13 - 27
120
150
18(typ) 10
12°
120 160
45
27
54
172
222
Technical Data
One minute power frequency withstand voltage, 50Hz, wet = 114 kV
Lightning impulse withstand voltage, 1,2/50, pos. = 255 kV
Arcing distance = 350 mm
Minimum creepage distance = 1118 mm Description Unspecified Weight Substitute for
Specified cantilever load (SCL) = 3 kN Tolerances
0, 1 kg
Maximum design cantilever load (MDCL) = 1.5 kN 36kV Side Mount Post Insulator 0,0
0,00
0.25
0.1 Drawn By 05/07 R.N
Number of small/large sheds = 5/5 c/w Gain Base (154) Angles 1
Checked By 05/07 ALJ
GT-TE-COM-0021 Approved By
Material Revision
SCL and MDCL are in acc. to IEC 61952 000
Scale Drawing/Part Number
126
315
13 - 27
120
150
18(typ) 10
12°
120 160
45
27
54
224
274
Technical Data
One minute power frequency withstand voltage, 50Hz, wet = 114 kV
Lightning impulse withstand voltage, 1,2/50, pos. = 255 kV
Arcing distance = 350 mm
Minimum creepage distance = 1118 mm Description Unspecified Weight Substitute for
Specified cantilever load (SCL) = 3 kN Tolerances
0, 1 kg
Maximum design cantilever load (MDCL) = 1.5 kN 36kV Side Mount Post Insulator 0,0
0,00
0.25
0.1 Drawn By 05/07 R.N
Number of small/large sheds = 5/5 c/w Gain Base (203 - 206) Angles 1
Checked By 05/07 ALJ
GT-TE-COM-0099 Approved By
Material Revision
SCL and MDCL are in acc. to IEC 61952 000
Scale Drawing/Part Number
15 545
18
147
74
M12
186
Technical Data
One minute power frequency withstand voltage, 50Hz, wet = 205 kV
Lightning impulse withstand voltage, 1,2/50, pos. = 384 kV
Arcing distance = 580 mm
Minimum creepage distance = 1476 mm
Specified mechanical load (SML) = 54 kN
Number of sheds = 13
Material of fittings = Steel, h.d.g.
Weight (approx.) = 8.0 kg
Description Unspecified Weight Substitute for
Tolerances
Maximum deflection @ 2000mm with 50kg = 30mm 0, 1 kg
(Assuming zero deflection in interconnection) Stand - Off Insulator Assembly 0,0 0.25
R.N
0,00 0.1 Drawn By 06/07
25kV AC, 4 Hole Flange Base (PCD 110) / Angles 1
Material Revision
SML in acc. to IEC 61109
Scale Drawing/Part Number
N.T.S.
Galvanizing (h.d.g.) acc. to EN ISO 1461 144 034-032
3kV DC Insulators
18 18
50 58 112 9.50
+0.5
13 0
19.0
50.0
51.0
Technical Data
One minute power frequency withstand voltage, 50Hz, wet = 65 kV
Lightning impulse withstand voltage, 1,2/50, pos. = 175 kV
Arcing distance = 248 mm
Minimum creepage distance = 406 mm
Specified mechanical load (SML) = 54 kN
Number of sheds = 4
Material of fittings = Steel, h.d.g.
Description Unspecified Weight Substitute for
Weight (approx.) = 5.5 kg Tolerances
0, 1 kg
0,0 0.25
Small Round Tongue / Clevis End Fitting in acc. to Drawing BBB0430 Compression - Tension insulator 0,00
Angles
0.1
1
Drawn By 22/05/2007 R.N
Clevis / Small Round Tongue Checked By 22/05/2007 ALJ
SML in acc. to IEC 61109 54 016897 Approved By
Material Revision
000
Galvanizing (h.d.g.) acc. to EN ISO 1461 Scale Drawing/Part Number
N.T.S.
144 034-025
This drawing and its contents are
confidential and exclusive property
of PFISTERER (PTY) LTD. No
publications, copies or ditribution
may be made without written concent
by PFISTERER (PTY) LTD.
317 152
233
+0.5
13 0
+0.5
18 0
45.0
74
M12
Technical Data
One minute power frequency withstand voltage, 50Hz, wet = 65 kV 186
Lightning impulse withstand voltage, 1,2/50, pos. = 175 kV
Arcing distance = 248 mm
Minimum creepage distance = 406 mm
Specified mechanical load (SML) = 54 kN
Number of sheds = 4
Material of fittings = Steel,h.d.g Description Unspecified
Tolerances
Weight Substitute for
233
+0.5
18 0
+0.5
18 0
45.0
30
112 50 58
52.0
+0.5 19.0
13 0
9.50
50.0
Technical Data
143
30
20
+1.5 0 +2
13 0 20 - 2 38 0
16.0
91 24
+0.8
18 - 0.8
Technical Data
One minute power frequency withstand voltage, 50Hz, wet = 55 kV
Lightning impulse withstand voltage, 1,2/50, pos. = 143 kV
Arcing distance = 170 mm
Minimum creepage distance = 400 mm
Specified mechanical load (SML) = 70 kN
Routine test load (RTL) = 55 kN
Number of sheds = 4 Description Unspecified Weight Substitute for
Tolerances
Material of fittings = Steel, h.d.g. 0, 1 kg
Material Revision
SML and RTL are in acc. to IEC 61109
Scale Drawing/Part Number