Professional Documents
Culture Documents
de la Refinería de Talara
GENERAL
DOCUMENTO
CONTROLADO
T-00689 FECHA 05/10/16
Este documento es propiedad de Técnicas Reunidas. Su reproducción sin permiso previo por escrito esta estrictamente prohibida.
Proyecto de Modernización
de la Refinería de Talara
CONTENTS
1. PURPOSE .................................................................................................................. 3
2. SCOPE ....................................................................................................................... 3
3. INDEX......................................................................................................................... 3
Este documento es propiedad de Técnicas Reunidas. Su reproducción sin permiso previo por escrito esta estrictamente prohibida.
Proyecto de Modernización
de la Refinería de Talara
1. PURPOSE
The following documents are intended as a general guide to locate, define, and size
typical connections for equipment and piping.
2. SCOPE
This document covers the philosophy to follow for the piping systems and equipment
that require provisions for typical connections. These requirements supplement the
minimum requirements indicated by the Codes under which the piping systems or
equipment are to be designed
3. INDEX
This table shows in which Specification are included the different typical connections.
Este documento es propiedad de Técnicas Reunidas. Su reproducción sin permiso previo por escrito esta estrictamente prohibida.
Piping Class Index
Project: 02070
Revision: 02
N: new piping class
A215F CS 1500 RF 1.5 mm TYPE 5 D04 D04 V07 V04 P04 T01, T02 F03
A21F CS 150 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A23F CS 300 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A26F CS 600 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A29F CS 900 RF 1.5 mm TYPE 5 D04 D04 V07 V04 P04 T01, T02 F03
A2B1F CS 150 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A2B3F CS 300 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A2B6F CS 600 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A2B9F CS 900 RF 1.5 mm TYPE 5 D04 D04 V07 V04 P04 T01, T02 F03
A2C1F CS 150 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A2C3F CS 300 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A2CX1F CS 150 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A2X15F CS 1500 RF 1.5 mm TYPE 5 D04 D04 V07 V04 P04 T01, T02 F03
A2X1F CS 150 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A2X3F CS 300 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A2X6F CS 600 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A2X9F CS 900 RF 1.5 mm TYPE 5 D04 D04 V07 V04 P04 T01, T02 F03
A31F CS 150 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A33F CS 300 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A36F CS 600 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A3C1F CS 150 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A3C3F CS 300 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A3C6F CS 600 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A3H1F CS + NACE + HIC 150 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A3H3F CS + NACE + HIC 300 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A3H6F CS + NACE + HIC 600 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A3S1F CS + NACE 150 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A3S3F CS + NACE 300 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A3S9F CS + NACE 900 RF 3 mm TYPE 5 D04 D04 V07 V04 P04 T01, T02 F03
A3X3F CS 300 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A3X6F CS 600 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A3XH3F CS + NACE + HIC 300 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A3XS1F CS + NACE 150 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A3XS3F CS + NACE 300 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A3XS6F CS + NACE 600 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A3XS9F CS + NACE 900 RF 3 mm TYPE 5 D04 D04 V07 V04 P04 T01, T02 F03
A61F CS 150 RF 6 mm TYPE 7 D02 D02 V05 V02 P02 NO T01, T02 F04
A63F CS 300 RF 6 mm TYPE 7 D02 D02 V05 V02 P02 NO T01, T02 F04
Piping Class Index
Project: 02070
Revision: 02
N: new piping class
A6H15F CS + NACE + HIC 1500 RF 6 mm TYPE 6 NO D04 NO D04 NO V05 NO V04 NO P04 NO T01, T02 F05
A6H1F CS + NACE + HIC 150 RF 6 mm TYPE 7 D02 D02 V05 V02 P02 NO T01, T02 F04
A6H3F CS + NACE + HIC 300 RF 6 mm TYPE 7 D02 D02 V05 V02 P02 NO T01, T02 F04
A6H9F CS + NACE + HIC 900 RF 6 mm TYPE 6 NO D04 NO D04 NO V05 NO V04 NO P04 NO T01, T02 F05
A6S15F CS + NACE 1500 RF 6 mm TYPE 6 NO D04 NO D04 NO V05 NO V04 NO P04 NO T01, T02 F05
A6S1F CS + NACE 150 RF 6 mm TYPE 7 D02 D02 V05 V02 P02 NO T01, T02 F04
A6XH1F CS + NACE + HIC 150 RF 6 mm TYPE 7 D02 D02 V05 V02 P02 NO T01, T02 F04
A71F CS 150 RF 7.5 mm TYPE 4 NO NO D03 NO NO D03 NO NO V05 NO NO V03 NO NO P03 NO T01, T02 F04
A91F CS 150 RF 7.9 mm TYPE 4 NO NO D03 NO NO D03 NO NO V05 NO NO V03 NO NO P03 NO T01, T02 F04
A93F CS 300 RF 7.9 mm TYPE 4 NO NO D03 NO NO D03 NO NO V05 NO NO V03 NO NO P03 NO T01, T02 F04
A9V1F CS 150 RF 7.9 mm TYPE 4 NO NO D03 NO NO D03 NO NO V05 NO NO V03 NO NO P03 NO T01, T02 F04
B21F LTCS 150 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
B23F LTCS 300 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
B3H1F LTCS + NACE + HIC 150 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
B3H3F LTCS + NACE + HIC 300 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
B3S1F LTCS + NACE 150 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
B3S3F LTCS + NACE 300 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
C21F Galv. CS 150 RF 1.5 mm TYPE 1 D01 D01 V06 V01 P01 T01 F01
E23F 1 1/4 Cr 1/2 Mo 300 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
E2B3F 1 1/4 Cr 1/2 Mo 300 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
E2X3F 1 1/4 Cr 1/2 Mo 300 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
E36F 1 1/4 Cr 1/2 Mo 600 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
E3X6F 1 1/4 Cr 1/2 Mo 600 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
E6X9F 1 1/4 Cr 1/2 Mo 900 RF 6 mm TYPE 6 NO D04 NO D04 NO V05 NO V04 NO P04 NO T01, T02 F05
F31F 2 1/4 Cr 1 Mo 150 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
F33F 2 1/4 Cr 1 Mo 300 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
F3B3F 2 1/4 Cr 1 Mo 300 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
F3X6F 2 1/4 Cr 1 Mo 600 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
F61F 2 1/4 Cr 1 Mo 150 RF 6 mm TYPE 3 NO D02 NO D02 NO V05 NO V02 NO P02 NO T01, T02 F04
H33F 5 Cr 1/2 Mo 300 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
H36F 5 Cr 1/2 Mo 600 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
Piping Class Index
Project: 02070
Revision: 02
N: new piping class
H63F 5 Cr 1/2 Mo 300 RF 6 mm TYPE 3 NO D02 NO D02 NO V05 NO V02 NO P02 NO T01, T02 F04
H66F 5 Cr 1/2 Mo 600 RF 6 mm TYPE 3 NO D02 NO D02 NO V05 NO V02 NO P02 NO T01, T02 F04
I31F 9 Cr 1 Mo 150 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
I33F 9 Cr 1 Mo 300 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
I36F 9 Cr 1 Mo 600 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
I63F 9 Cr 1 Mo 300 RF 6 mm TYPE 3 NO D02 NO D02 NO V05 NO V02 NO P02 NO T01, T02 F04
K1S1F 316 / 316L SS + NACE 150 RF 0.75 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
K1S3F 316 / 316L SS + NACE 300 RF 0.75 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
M11F 304 / 304L SS 150 RF 0.75 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
M13F 304 / 304L SS 300 RF 0.75 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
M16F 304 / 304L SS 600 RF 0.75 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
M1X3F 304 / 304L SS 300 RF 0.75 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
M21F 304 / 304L SS 150 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
M23F 304 / 304L SS 300 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
M2S1F 304 / 304L SS + NACE 150 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
M2S3F 304 / 304L SS + NACE 300 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
M3S1F 304 / 304L SS + NACE 150 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
M3S3F 304 / 304L SS + NACE 300 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
N16F 321 SS 600 RF 0.75 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
N19F 321 SS 900 RF 0.75 mm TYPE 5 D04 D04 V07 V04 P04 T01, T02 F03
N1X15F 321 SS 1500 RF 0.75 mm TYPE 5 D04 D04 V07 V04 P04 T01, T02 F03
N1X3F 321 SS 300 RF 0.75 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
N23F 321 SS 300 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
Q23F 304H SS 300 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
U2S1F DUPLEX UNS S32205 NACE 150 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
U2S3F DUPLEX UNS S32205 NACE 300 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
Y2S1F Alloy 20 (UNS N08020) 150 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
NACE
A2CX3F CS 300 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A2J1F CS 150 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A3J1F CS 150 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A3JH1F CS + NACE + HIC 150 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A3JH3F CS + NACE + HIC 300 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A3JS1F CS + NACE 150 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A3XH6F CS + NACE + HIC 600 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
A6JH1F CS + NACE + HIC 150 RF 6 mm TYPE 7 D02 D02 V05 V02 P02 NO T01, T02 F04
Piping Class Index
Project: 02070
Revision: 02
N: new piping class
A6S3F CS + NACE 300 RF 6 mm TYPE 7 D02 D02 V05 V02 P02 NO T01, T02 F04
A6XH3F CS + NACE + HIC 300 RF 6 mm TYPE 7 D02 D02 V05 V02 P02 NO T01, T02 F04
A9V3F CS 300 RF 7.9 mm TYPE 4 NO NO D03 NO NO D03 NO NO V05 NO NO V03 NO NO P03 NO T01, T02 F04
B26F LTCS 600 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
B3S6F LTCS + NACE 600 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
F3B3F 2 1/4 Cr 1 Mo 300 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
M1J1F 304 / 304L SS 150 RF 0.75 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
M1J3F 304 / 304L SS 300 RF 0.75 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
N1X6F 321 SS 600 RF 0.75 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
N1X9F 321 SS 900 RF 0.75 mm TYPE 5 D04 D04 V07 V04 P04 T01, T02 F03
PE00T HDPE - FF 0 mm
U2JS3F DUPLEX UNS S32205 NACE 300 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
N A3JS3F CS + NACE 300 RF 3 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
N A6JH3F CS + NACE + HIC 300 RF 6 mm TYPE 7 D02 D02 V05 V02 P02 NO T01, T02 F04
N M2J1F 304 / 304L SS Dual Quality 150 RF 1.5 mm TYPE 2 D02 D02 V07 V02 P02 T01, T02 F02
DESIGN NOTES
- To identify a typical drain connection, type, size and material specification will be required.
- The characteristics for typical drain connection components will be those indicated in the
material specification assigned for the typical connection.
- Any fitting to be installed which is not included as a typical connection component, will be
considered part of the header.
- Any typical drain connection not included in this document and required for a specific
service, will be defined, numbered and included.
CONSTRUCTION NOTES
- The characteristics for typical drain connection components will be those indicated in the
material specification assigned for the typical connection.
- The most suitable orientation of valve stems will be determined on Site, unless specified
otherwise.
- The branch block valves will be located as close as possible to the header, bearing in mind
that they must be positioned outside the insulation area in order to allow for easy handling,
and that the minimum distance between welds is 50 mm.
Este documento es propiedad de Técnicas Reunidas. Su reproducción sin permiso previo por escrito esta estrictamente prohibida.
Proyecto de Modernización
de la Refinería de Talara
DESIGN NOTES
- To identify a typical vent connection, type, size and material specification will be required.
- The characteristics of typical vent connection components will be those indicated in the
material specification assigned for the typical connection.
- Any fitting to be installed which is not included as a typical connection component, will be
considered part of the header.
- Any typical vent connection not included in this document and required for a specific
service, will be defined, numbered and included.
CONSTRUCTION NOTES
- The characteristics of typical vent connection components will be those indicated in the
material specification assigned for the typical connection.
- The most suitable orientation of valve stems will be determined on Site, unless specified
otherwise.
- The branch block valves will be located as close as possible to the header, bearing in mind
that they must be positioned outside the insulation area in order to allow for easy handling,
and that the minimum distance between welds is 50 mm.
Este documento es propiedad de Técnicas Reunidas. Su reproducción sin permiso previo por escrito esta estrictamente prohibida.
Proyecto de Modernización
de la Refinería de Talara
DESIGN NOTES
- To identify a typical pressure connection, type, size and material specification will be
required.
- The characteristics of typical pressure connection components will be those indicated in the
material specification assigned for the typical connection.
- Any fitting to be installed which is not included as a typical connection component, will be
considered part of the header.
- Any typical pressure connection not included in this document and required for a specific
service, will be defined, numbered and included.
CONSTRUCTION NOTES
- The characteristics of typical pressure connection components will be those indicated in the
material specification assigned for the typical connection.
- The most suitable orientation of valve stems will be determined on Site, unless specified
otherwise.
- Typical valve connections will be located as close as possible to the header bearing in mind
that they must be positioned outside the insulation area in order to allow for easy handling.
- When a blind flange is required for a pressure connection, this will be drilled on site. The
instrument subcontractor will perform this operation.
Este documento es propiedad de Técnicas Reunidas. Su reproducción sin permiso previo por escrito esta estrictamente prohibida.
Proyecto de Modernización
de la Refinería de Talara
DESIGN NOTES
- Enough space will be left for installation and disassembly of the instrument.
- To identify a typical temperature connection, type, size and material specification will be
required.
- Any fitting to be installed which is not included in this document, will be considered part of
the header.
- Any typical temperature connection not included in this document and required for a
specific service, will be defined, numbered and included.
CONSTRUCTION NOTES
Este documento es propiedad de Técnicas Reunidas. Su reproducción sin permiso previo por escrito esta estrictamente prohibida.
Proyecto de Modernización
de la Refinería de Talara
DESIGN NOTES
- Enough space will be left for installation and disassembly of the instrument.
- To identify a typical flow connection, type, size and material specification will be required.
- The characteristics of typical flow connection components will be those indicated in the
material specification assigned for the typical connection.
- Any fitting to be installed which is not included in this document, will be considered part of
the header.
- Any typical flow connection not included in this document and required for a specific
service, will be defined, numbered and included.
CONSTRUCTION NOTES
- The characteristics of typical flow connection components will be those indicated in the
material specification assigned for the typical connection.
- Unless specified otherwise, the most suitable orientation of valve stems will be determined
on Site.
- The Instrument Department will be responsible for the supply of orifice plates.
Este documento es propiedad de Técnicas Reunidas. Su reproducción sin permiso previo por escrito esta estrictamente prohibida.
Proyecto de Modernización
de la Refinería de Talara
DESIGN NOTES
- To identify a typical drip pocket connection, type, size and material specification will be
required.
- The characteristics of typical drip pocket connection components will be those indicated in
the material specification assigned for the typical connection.
- Any fitting to be installed which is not included in this document, will be considered part of
the header.
- Any typical drip pocket connection not included in this document and required for a specific
service, will be defined, numbered and included.
CONSTRUCTION NOTES
- The characteristics of typical drip pocket connection components will be those indicated in
the material specification assigned for the typical connection.
Este documento es propiedad de Técnicas Reunidas. Su reproducción sin permiso previo por escrito esta estrictamente prohibida.
Proyecto de Modernización
de la Refinería de Talara
DESIGN NOTES
- To identify a typical steam trap connection, type, size and material specification will be
required.
- The characteristics of typical steam trap connection components will be those indicated in
the material specification assigned for the typical connection.
- For 150# and 300#, trap valve stations shall be used, being the following configuration:
- The steam trap configuration for higher ratings will follow the typical connection as shown
below.
- Any fitting to be installed which is not included in this document, will be considered part of
the header.
- Any typical steam trap connection not included in this document and required for a specific
service, will be defined, numbered and included.
CONSTRUCTION NOTES
- The characteristics of typical steam trap connection components will be those indicated in
the material specification assigned for the typical connection.
Este documento es propiedad de Técnicas Reunidas. Su reproducción sin permiso previo por escrito esta estrictamente prohibida.