Professional Documents
Culture Documents
(D) Inclined at an angle less than 90° to the direction of tool travel
In metal cutting operations, the shear angle is the angle made by the shear plane with the
In order to prevent tool from rubbing the work _________ on tools are provided.
(A) Aluminium
In metal machining, the zone where the maximum heat is generated due to the plastic deformation of metal, is called
(D)
Which tool has longer life?───
a)
a. continuous chipsq
b. discontinuous chips
c. Built-up chips
d. all of the above with some proportion
In the metal cutting process, when the compression limit of the metal in front of the
cutting tool has been exceeded then it is separated from workpiece and flows
a. elastically
b. plastically
c. rigidly
d. none of the above
b. The point at which the cutting tool reaches, beyond which it will not function
satisfactorily until it is reground, is called as
c. a. tool wear
b. tool failure
c. too diffusion
d. none of the above
Workpiece material
Cutting speed
Depth of cut
In machining operation, Uncut chip thickness t0= 0.8 mm and Chip thickness tc=1.2 mm. The correct
option for the chip thickness ratio (r) is
0.4
0.66
0.83
1.5
Nose
Flank
Face
Cutting edge
(A) Ceramics
(D) Carriage