Professional Documents
Culture Documents
Submitted by:
CARA, ELAINE N.
CATULAY, SHANE KRYSTAL B.
CHUA, KATHLYN AUDREY R.
CRESENCIA, LAICA ALETH M
CEIT-29-901E (Group 3)
MH/ 10:30-12:30P
Submitted to:
THEORY
A DC-DC converter is a power electronics device that accepts a DC input voltage and
also provides a DC output voltage. The output voltage of DC-to-DC converter can be greater
than the input voltage or vice versa. The converter output voltages are used to match the power
A buck converter is a DC-to-DC power converter that steps down voltage from its input to its
output. It is a class of switched-mode power supply typically containing at least two semiconductors
and at least one energy storage element, a capacitor, inductor, or the two in combination.
CIRCUIT DIAGRAM
MATERIALS:
1N5401 10k ohm Resistor
(2) 10uF Capacitor 100 ohm Resistor
LM317T 120 ohm Resistor
BD140 62k ohm Resistor
BC547 33k ohm Resistor
2k ohm Resistor 2k Variable Resistor
12k ohm Resistor Lamp 12V
WORK STATUS
simulated on the Multisim. The purpose of this is to know the expected output
4. Soldering. The components were placed on the PCB for soldering purposes.
5. Testing. The actual constructed circuit was tested to know if it is working and to
6. Chassis. For a more presentable work, the finish product is set on an acrylic
fiber.
TECHNICAL SPECIFICATIONS:
1N5401
BC547
BC140
LM317