Professional Documents
Culture Documents
ZGMn13 Standard PDF
ZGMn13 Standard PDF
The commonly used heat treatment method is solution treatment, that is, the steel is heated to 1050 to 1100 DEG
C., the heat is removed to eliminate the as-cast microstructure, a single-phase austenite structure is obtained,
and then the water is quenched to maintain the structure at normal temperature. After heat treatment, the
strength, plasticity, and toughness of the steel are greatly improved, so this kind of heat treatment method is
often referred to as water toughness treatment.
Standard:
China GB Standard GB/T 5680-1998(Now GB/T 5680-1998 has been replaced by GB/T 5680-2010)
Steel grade and chemical composition (mass fraction) of high manganese cast steel (%)
Steel grade C Si Mn P ≤ S ≤ Cr Mo
ZGMn13 1.00~1.45 0.30~1.00 11.0~14.0 0.090 0.040 — —