Professional Documents
Culture Documents
Csa (Computer System Architecture)
Csa (Computer System Architecture)
कृपया -पु तका, ओएमआर शीट एवं उ र–पु तका म दये गए Carefully read the instructions given on Question Paper,
OMR Sheet and Answer Sheet.
िनदश को यान पूवक पढ़।
-पु तका क भाषा अं ेजी है । पर ाथ केवल अं ेजी भाषा म ह Question Paper is in English language. Candidate can answer
in English language only.
उ र कर सकता है ।
इस मॉ यूल/पेपर के दो भाग है ।भाग एक म चार और भाग दो म There are TWO PARTS in this Module/Paper. PART ONE
contains FOUR questions and PARTTWO contains FIVE
पाँच है ।
questions.
भाग एक‘वैक पक’ कार का है जसके कुल अंक 40 है तथा भाग PARTONE is Objective type and carries 40 Marks.
PARTTWO is subjective type and carries 60 Marks.
दो,‘ य परक’ कार है और इसके कुल अंक 60 है ।
भाग एक के िलए अिधकतम समय सीमा एक घ टा िनधा रत क गई Maximum time allotted for PART ONE is ONE HOUR.
Answer bookfor PART TWO will be supplied atthe table
है ।भाग दो क उ र-पु तका,भाग एक क उ र-पु तका जमा कराने के
when the answer sheet for PART ONE is returned.
प ात द जाएगी। तथा प, िनधा रत एक घंटे से पहले भाग एक पूरा However, candidateswho complete PART ONE earlier than
करने वाले पर ाथ भाग एक क उ र-पु तका िनर क को स पने के one hour, can collect the answer book for PART TWO
immediately after handing over the answer sheet for
तुरंत बाद,भाग दो क उ र-पु तका ले सकते ह। PARTONE.
पर ाथ ,उप थित-प का पर ह ता र कए बना अथवा अपनी Candidate cannot leave the examination hall/room
without signing on the attendance sheet or handing
उ र-पु तका, िनर क को स पे बना, पर ा हाल नह ं छोड़ सकता
over his Answer sheet to the invigilator. Failing in
ह।ऐसा नह करने पर,पर ाथ को इस मॉ यूल/पेपर म अयो य doing so, will amount to disqualification of candidate
घो षत कर दया जाएगा। in this Module/Paper.
-पु तका को खोलने के िनदश िमलने के प ात एवं उ र दे ने से After receiving the instruction to open the booklet and
before answering the questions, the candidate should
पहले उ मीदवार यह जाँच कर यह सुिन त कर ले क -पु तका
ensure that the Question booklet is complete in all respect.
येक से संपण
ू है ।
appropriate one and enter in the 1.8 PLC stands for ________
(A) Program logic code
“OMR” answer sheet supplied with
(B) Programmable logic device
the question paper, following (C) Performance logo code
instructions therein. (110) (D) Programmable light contact
1.9 Each stage in pipelining should be
1.1 The instruction -> Add LOCA,R0 does, completed within ____ cycle.
(A) Adds the value of LOCA to R0 and (A) 1 (B) 2
stores in the temp register (C) 3 (D) 4
(B) Adds the value of R0 to the address of 1.10 What is used by an assembly language to
LOCA represent each low-level machine
(C) Adds the values of both LOCA and R0 operation or opcode?
and stores it in R0 (A) Variable (B) Mnemonic
(D) Adds the value of LOCA with a value (C) Labels (D) All of the options
in accumulator and stores it in R0
2. Each statement below is either TRUE
1.2 In case of, Zero-address instruction
method, the operands are stored in or FALSE. Choose the most
(A) Registers (B) Accumulators appropriate one and enter your
(C) Push down stack (D) Cache choice in the “OMR” answer sheet
supplied with the question paper,
1.3 _______ is used to store data in registers.
(A) D flip-flop following instructions therein. (110)
(B) JK flip-flop
(C) RS flip-flop 2.1 Fetch cycle is also a type of instruction
(D) None of the options cycle.
2.2 Address bus is bidirectional.
1.4 The SRAM’s are basically used as ______.
2.3 The read and write memory of a computer
(A) Registers (B) Caches
is called ROM.
(C) TLB (D) Buffer
2.4 PC holds the address of the data which is
1.5 ______ are used to overcome the difference to beexecuted next.
in data transfer speeds of various devices. 2.5 Stack pointer is not a sequence of memory
(A) Speed enhancing circuitry locations defined by the user.
(B) Bridge circuits
2.6 Control bus is a group of lines used for the
(C) Multiple Buses
purpose of data flow.
(D) Buffer registers
2.7 A stack can be placed in a portion of a
1.6 The instruction, Add R1,R2,R3 in RTN is large memory.
_______. 2.8 LIFO is a stack organization.
(A) R3=R1+R2+R3
(B) R3<-[R1]+[R2]+[R3] 2.9 ROM is a volatile memory.
(C) R3=[R1]+[R2]
2.10 1011-1001-1001 = -0011.
(D) R3<-[R1]+[R2]
Page 2 SPACE FOR ROUGH WORK A4-R4-01-19
3. Match words and phrases in column X with the closest related meaning/
word(s)/phrase(s) in column Y. Enter your selection in the “OMR” answer sheet
supplied with the question paper, following instructions therein. (110)
X Y
3.10 Name the type of memory that can be erased J. To detect errors
with the electric discharge.
K. DMA
M. 1
4.3 ________is a digital circuit that converts information into coded form.
organization. (8+7)