Professional Documents
Culture Documents
ASPA Shoring Props System is a versatile types capable of handling virtually any slab forming project. Can be used on
all types of building construction or for any type where an adjustable load bearing member is required.
The high tensile steel pin is located through a slot in the outer section and a hole on the inner section for coarse adjustment.
the cast collar located below the pin gives fine adjustment for leaving or striking.
The Flexible height adjustment the system is suited:
● To support slab formwork at any height
● To build slab tables for large slab surfaces
● To support concrete beams or prefabricated slabs
Features:
● The quick lowering system releases the stress in the
prop with one strike of a hammer blow
● Extendable in height with different sizes of props
● Modular design for ver cal buildings of virtually
any required height Shoring System Advantage:
● Poten al wind load can be transferred into The same components are used for different application and the
the props number and position of the props is determined by the system.
● Tripod as assembly auxiliary for props The most important requirements of a building can be meet easily
● Different sizes, models with covering all loads and and flexibly:
measurements. ● Ground plan layout
● Manufactured with high resistannce steel tubes. ● Building type
● Slab thickness
● Concrete finish
● Floor height
SHORING PROPS Components
Shoring Props
Prop for shoring with level plate available for
shoring in various length, and with the option of the classic
sleeve, on iron or cast iron, or with the external thread.
Available colors are red, navy blue andgray, or there is the
possibility for weather resistance of electroplated or
hot dip galvanization .
Props is versatile available in different sizes which provide a range of
propping heights. Props are multi functional and can be used to
back‐prop both beams and slabs until the concrete has cured.
They are also widely used to support floor centres on which decking
plates are placed to form light slabs suitable for low cost housing
developments. The floor centres are adjustable to cater for different
widths between walls.
Props 30
Extension Range Weight (kg)
Eurex 30/250 (147‐250) 15.33
Eurex 30/300 (172‐300) 17.21
Eurex 30/350 (197‐350) 21.18
Eurex 30/400 (222‐400) 25.44
Props 20
Extension Range Weight (kg)
Eurex 20/250 (147‐250) 13.95
Eurex 20/300 (172‐300) 15.83
Eurex 20/350 (197‐350) 18.37
Eurex 20/400 (222‐400) 23.76
Eurex 20/550 (297‐550) 35.11
ECO‐Props
Extension Range Weight (kg)
ECO‐Prop (175‐312) 13.75
ECO‐Prop (198‐335) 15.92
ECO‐Prop (259‐395) 17.58
ECO‐Prop (320‐487) 21.85
SHORING PROPS Components
Aluminum Beam Wedge Prop Head
Length Weight (kg)
5.9m Alsik Beam 19.47
4.9m Alsik Beam 16.17 Weight (kg)
4.5m Alsik Beam 14.85 16.67
3.9m Alsik Beam 12.87
3.3m Alsik Beam 10.89
2.9m Alsik Beam 9.57
2.5m Alsik Beam 8.25
2.0m Alsik Beam 6.60 U‐head
1.5m Alsik Beam 4.95
H20 Beam Weight (kg)
2.75
Length Weight (kg)
5.9m H20 Beam 29.50
4.9m H20 Beam 24.50
4.5m H20 Beam 22.50
3.9m H20 Beam 19.50 H20 Supporting Head
3.3m H20 Beam 16.50
2.9m H20 Beam 14.50
2.5m H20 Beam 12.50
2.0m H20 Beam 10.00 Weight (kg)
1.5m H20 Beam 7.50 1.54
Railing Clamp
Tripod
Weight (kg)
8.55
Weight (kg)
9.12