Professional Documents
Culture Documents
1 2 3 4 5 6 7 8 9 10 11 12
Sr.No Description of the Equipment I/C Amps. O/G Amps. KV / V KA B.B ( A) I/ C O/G BC Qty Area
KW/KVA/M
HP Remarks
VA
28.81 VCB-IEC-62271
28.81 VCB
9.60 VCB
9.60 VCB
9.60 VCB
9.60 VCB
9.60 VCB
11.59
9.60 VCB
6.3MVA TF
6.3
2.5
2
Motor rating
2
Motor rating
IEC 62305-3, IEC 60947
1000 kvar
1200kvar
400kvar
238.32
200 KVA
30 KVA
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
SCHEDULE OF QUANTITIES - CIVIL WORK
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in
width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5, including getting out the excavated soil and disposal of
2.00 surplus excavated soil as directed , with in AAI premises. Item2 9400.00 cum
All kinds of soil
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each
3.00 deposited layer by ramming and watering, lead with in AAI permise sand lift upto 1.5 m. Item3 112446.00 cum
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
4.00 All kinds of soil Item4 346171.00 cum
Supplying and filling in plinth with fine sand in pile foundations and under floors, including watering, ramming, consolidating and dressing complete.
5.00 Item5 15038.00 cum
Open timbering over areas including strutting, shoring etc. complete.
6.00 (Measurements to be taken of the face area timbered). Item6 20264.00 sqm
Depth upto 9.50 m
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal
7.00 of excavated earth with in AAI permises and lift upto 1.5 m, as directed by Engineer-in-Charge. Item7 30000.00 sqm
All kinds of soil.
Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
Along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of
8.00 300 mm including excavation channel along the wall & rodding etc. complete: Item8 9930.00 metre
With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
Treatment of soil under floors using chemical emulsion @ one liter per hole, 300 mm apart including drilling 12 mm diameter holes :
9.00 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration Item9 76210.00 sqm
Supplying chemical emulsion in sealed containers including delivery as specified.
10.00 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Item10 129614.00 liter
Providing & laying of Filter Media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRTH
11.00 specifications to a thickness of not less than 600 mm. Item11 2122.00 CUM
Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods,watering, rolling each layer with 1/2 tonne roller, or wooden or steel
12.00 rammers, and rolling every 3rd and topmost layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood Item12 1 CUM
banks,marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level
13.00 1:5:10 (1 Cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) Item13 3489.00 cum
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level
14.00 1:4:8 (1 Cement : 4 coarse sand (zone-III): 8 graded stone aggregate 40 mm nominal size) Item14 7076.00 cum
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level
15.00 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) Item15 2595.00 cum
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level
16.00 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Item16 12.00 cum
Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully
automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design
of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of
centering and shuttering including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,
improve workability without impairing strength and durability as per direction of the Engineer-in-charge.
17.00 Note : 1) Excess/less cement used than specified in this item is payable/ recoverable separately.. Item17 1865.00 cum
All works upto plinth level in M-10 grade plain cement concrete (cement content considered @ 220 kg/cum)
Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully
automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design
of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of
centering and shuttering including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,
improve workability without impairing strength and durability as per direction of the Engineer-in-charge.
18.00 Note : 1) Excess/less cement used than specified in this item is payable/ recoverable separately.. Item18 9375.00 cum
All works Above plinth level in M-10 grade plain cement concrete (cement content considered @ 220 kg/cum)
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm
19.00 thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & Item19 1948.00 sqm
dressing & finishing the top smooth.
Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, cover, plain
window sills, shelves, louvers, steps, stair cases, etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand),
20.00 cost of required centering, complete. Item20 71.00 cum
1:1.5:3 (1 Cement : 1.5 coarse sand ( Zone III) : 3 graded stone aggregate 20 mm nominal size)
Providing & laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design mix and manufactured in fully
automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design
of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of
centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/retard setting of
concrete, improve workability without imparing strength and durability as per direction of Engineer-in charge.
Note : (1) Excess/less cement used than specified in this item is payable/recoverable separately.
2. Fly ash confirming to grade 1 of IS 3812 (Part-1) only to be used as part replacement of OPC as per IS:456. Uniform blending with cement is to be
21.00 ensured in accordance with clauses 5.2 and 5.2.1 of IS : 456-2000 in the items of RMC Item21 348.00 CUM
All works up to plinth level
M-15 grade plain cement concrete ( cement content considered @ 240 kg/cum
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design
mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer,
manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying ,
excluding the cost of centering, shuttering and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103/
manufacturer's specifications/ approved design mix to accelerate/ retard setting of concrete, improve workability without impairing strength and
durability as per direction of the Engineer-in-charge..
22.00 (Note: Cement content considered in this item is 330 Kg/cum. Excess/less cement used as per design mix is payable /recoverable separately) Item22 93084.00 cum
All works upto plinth level.
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design
mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer,
manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying ,
excluding the cost of centering, shuttering and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to
accelerate/manufacturer's specifications/ approved design mix retard setting of concrete, improve workability without impairing strength and durability
as per direction of the Engineer-in-charge.
23.00 (Note: Cement content considered in this item is 330 Kg/cum. Excess/less cement used as per design mix is payable /recoverable separately) Item23 49255.00 cum
All works above plinth level upto floor V level .
Steel reinforcement for R.C.C. work ready to use " cut and bend " rebars of approved make from factory/ workshop to construction site including placing
in position and binding with binding wire all complete .
27.00 Upto Plinth Level Item27 14284893.00 Kg
Thermo-Mechanically Treated bars (Fe 500-D) or more
Steel reinforcement for R.C.C. work ready to use " cut and bend " rebars of approved make from factory/ workshop to construction site including placing
in position and binding with binding wire all complete .
28.00 Above Plinth Level Item28 10622378.00 Kg
Thermo-Mechanically Treated bars (Fe 500-D) or more
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
29.00 Foundations, footings, bases of columns etc. for mass concrete. Item29 40823.00 sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
30.00 Walls (any thickness) including attached pilasters buttresses , plinth and string courses etc Item30 62259.00 sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
31.00 Suspended floors, roofs, landings, balconies and access platform. Item31 85090.00 sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
32.00 Shelves (cast in situ) Item32 600.00 sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
33.00 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Item33 147037.00 sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
34.00 Columns, Pillars, Piers, Abutments, Posts and Struts. Item34 38965.00 sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
35.00 Stairs, (excluding landings) except spiral - staircases. Item35 3875.00 sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
36.00 Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the Item36 1200.00 sqm
like.
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
37.00 Edges of slab and breaks in floors and walls under 20 cms wide Item37 1200.00 metre
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
38.00 Weather shade, Chajjas, corbels etc., including edges. Item38 600.00 sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
39.00 Extra for shuttering in circular work (20% of respective centering and shuttering items) Item39 40000.00 sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
40.00 Vertical and horizontal fins individually or forming box louvers band, facias and eaves boars. Item40 600.00 sqm
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering / centering
at all levels, over a height of 3.50 m, for every additional height of 1 metre or part thereof (Plan area to be measured).
41.00 Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) Item41 338228.00 sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
42.00 Suspended floors, roofs, columns , landings, balconies and access platform. with water proof ply 12 mm thick. Item42 79500.00 sqm
Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC
structure, such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one
coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 liter per 240 running meter. Over the
primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the
43.00 engineer-in-charge. The product performance shall carry guaranteed for 5 years against any leakage. Item43 8805.00 metre
Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of
extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that
it provides floor to floor /floor to wall expansion control system for various vertical location in load application areas that accommodates multi directional
seismic movement without stress to it’s components. System shall consist of metal profiles with a universal. aluminum base member designed to
accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects
movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely
rotates / moves in all directions.
The Self – centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow
44.00 freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have Item44 1988.00 metre
watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in- Charge . (Material shall confirm to ASTM
6063.)
Floor joint upto 150mm gap
Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge.
The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material
shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in
office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight
45.00 aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall Item45 1380.00 metre
confirm to ASTM 6063.)
Wall joint upto 150mm gap
Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of
Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates asper ASTM
B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of
accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal
aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and
thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-
centering arrangement that freely rotates / moves in all directions.
The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow
freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact
46.00 of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in Item46 264.00 metre
the Joint System to have water tight joint is mandatory requirement. Material shall confirm to ASTM 6063.
Roof joint upto 150mm gap
Providing and fixing Expansion joint filler board of approved barand of Dawn colour between expansion joints, thickness built up using 10mm specifically
extruded high performance sheet minimum density 28 kg per cum and compression strength 0.21 Kg./Sqm when tested as per ASTM D-3575 including
using double sided adhesive SIL tape (manufactured by Supreme Industries Ltd. or approved equivalent) of 25x25x2 mm at four places per Sqm to the
casted surface to form the expansion joint filler board will become one side of the shuttering while the expansion joint is being created, including cost of
47.00 all materials, Transportation, cutting and placing to the required size, labour charges, sundries, wastage etc.at all levels complete as per drawings and as Item47 2386.00 sqm
per direction of Engineer-in-Charge.
150mm thick
Supplying and applying pre tested and approved water based concrete curing compound to concrete/ masonry surface, all as per manufacturer’s
48.00 specification and direction of Engineer-in-charge.( Not to be applied for shutter finish concrete surface) Item48 300450.00 sqm
Non Pigmented wet curing compound
49.00 Add or deduct for using extra cement in the items of design mix over and above the specified cement content therein Item49 200.00 quintal
50.00 Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof. Item50 200.00 cum
Providing and fixing parallel threaded couplers conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete
Reinforcement - Specification”, to reinforcement bars including threading, enlargement at connection by forging, protecting the prepared reinforcement
51.00 bars and related operations as required to complete the works per direction of Engineer-in-Charge. Item51 4137.00 each
Coupler for 16 mm diameter reinforcement bar
Providing and fixing parallel threaded couplers conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete
Reinforcement - Specification”, to reinforcement bars including threading, enlargement at connection by forging, protecting the prepared reinforcement
52.00 bars and related operations as required to complete the works per direction of Engineer-in-Charge. Item52 12412.00 each
Coupler for 20 mm diameter reinforcement bar
Providing and fixing parallel threaded couplers conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete
Reinforcement - Specification”, to reinforcement bars including threading, enlargement at connection by forging, protecting the prepared reinforcement
53.00 bars and related operations as required to complete the works per direction of Engineer-in-Charge. Item53 33102.00 each
Coupler for 25 mm diameter reinforcement bar
Providing and fixing parallel threaded couplers conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete
Reinforcement - Specification”, to reinforcement bars including threading, enlargement at connection by forging, protecting the prepared reinforcement
54.00 bars and related operations as required to complete the works per direction of Engineer-in-Charge. Item54 33102.00 each
Coupler for 28 mm diameter reinforcement bar
Providing and fixing parallel threaded couplers conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete
Reinforcement - Specification”, to reinforcement bars including threading, enlargement at connection by forging, protecting the prepared reinforcement
55.00 bars and related operations as required to complete the works per direction of Engineer-in-Charge. Item55 33102.00 each
Coupler for 32 mm diameter reinforcement bar
Providing and laying Reinforced cement concrete for construction of piers,abutments, portal frames, pier caps and bearing pedestals and seismic
arresters over pier/ abutment caps at all locations with specified grade using Ordinary Portland Cement (conforming to strength requirement of IS:8112)
including the cost of steel centering and shuttering etc. complete including testing of materials etc. for casting pier & pier cap in one/two stage, necessary
tools, plants, machinery and all related operations as required to complete the work as per drawings and Specifications with all leads, lifts and depths
true to level and position but excluding the cost of providing reinforcement. Reinforcement shall be measured and paid separately. Note:- Cement
content considered in this item is 480 Kg./Cum. Excess/ less cement used as per design mix is payable/ recoverable
56.00 separately. Item56 1.00 cum
Reinforced Cement Concrete -M-50
Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 7.5 in foundation and plinth including RCC band as required in,
57.00 Cement mortar 1:6 (1 Cement : 6 coarse sand) Item57 625.00 cum
Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor all level including
58.00 RCC band as required in all shapes and sizes in Cement mortar 1:6 (1 Cement : 6 coarse sand) Item58 7458.00 cum
Providing and laying autoclaved aerated cement blocks masonry with 100mm/150mm/200mm/250mm thick or as desired size/ thickness AAC blocks
conforming to IS 2185 Part 3 (1989) having density in oven dry condition 551 - 650 Kg/Cum, Grade -I, minimum Compressive strength 4 N/mm2, thermal
conductivity in air dry condition 0.23 W/mK in super structure above plinth level up to all floor level with RCC band at sill level and lintel level with
59.00 approved block laying polymer modified adhesive mortar (minimum 3-4mm thick) all complete as per direction of Engineering-Charge. (The payment of Item59 11275.00 cum
RCC band and reinforcement shall be made for separately).
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth including RCC band as required
60.00 in Item60 150.00 sqm
Cement mortar 1:4 (1 Cement : 4 coarse sand)
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level including RCC band as
61.00 required up to floor all level. Item61 617.00 sqm
Cement mortar 1:4 (1 cement :4 coarse sand).
Extra for providing and placing including drilling where as requred in position 2 Nos. 6 mm dia M.S. bars at every third course of half brick masonry
62.00 Item62 879.00 sqm
Providing and fixing 75 mm thick extruded polystyrene rigid insulation board of required size between cavity wall, complying with ISO 4898:2008 & ASTM
C 578-08b/15b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per IS 346),compressive strength of > 350 kPa
listed as per ASTM D 1621,density of 34-36 kg/cum as per ASTM D 1622, water absorption <1% by volume as per ASTM D 2842, oxygen index of 24.1 to
28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire retardant property as per DIN 4102, Part 1 of class B2 and as per
63.00 Item63 4274.00 sqm
ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge .
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with
dash fasteners of required dia & length including cut and groove ( hold fast lugs or dash fastener shall be paid for separately).
64.00 Second class teak wood Item64 40.00 cum
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480
N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per
65.00 direction of Engineer-in-charge. Item65 5356.00 Each
(Size-10x140mm)
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st
class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :
66.00 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Item66 2065.00 sqm
Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt/ suede finish with high density protective surface layer
and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.:
67.00 1.5 mm thick Item67 2142.00 sqm
Providing and fixing in position single leaf fire check doors and frames at all levels of approved make ( navior, sukrti, iCLEAN ) , design, finish, tested and
certified at CBRI, Roorkee or equivalent as approved. complete in all respect as per specifications and direction of Engineer-In-Charge and consisting of :-
a) Pressed male door frames manufactured from 1.6mm(16gauge) thick galvanised steel sheet confirming to IS 277(2003) of double rebate profile of size
minimum( 143mm X 57 mm) finished with 'H' -primer
b)minimum 46mm thick G.I. fire check door of 120 minutes fire rating conforming to BS:476 part 22 & IS : 364 part II fabricated with 2 nos. 1.2mm
thick(18 gauge) galvanised sheet with infill of fire rated properitory insulation filler bonded to both faces of sheet with lock seam joints at style edges and
internal reinforcement at top, bottom and style edges and internal reinforcement at top bottom and style edges for fire rating .
c)The door frames and door shutters shall be primed with 'H' primer and finished with PU/Powder coated . The shutter would be mounted with SS Ball
Bearing Hinges of size 100mm x 75mm x 3.0mm of Becker Fire Solutions ( 4Nos per leaf ),appropriate openings for vision panel glass. Prototype Test
certificate for a test carried out earlier at CBRI Roorkee or as approved equivalent for fire rating of doors, shall be attached along with manufacturers test
certificate.
d) All door shall be factory made including hardwares i.e. hinges, panic bar, door closer, lock, handles etc as desired with necessary reinforcement and
direction of Engineer in charge.
68.00 e) Minimum 5 mm thick Pyron /pyrobeck / Central/Saint Gobain Fire Rated Clear Non Wired Glass of 120 minutes rating one on each leaf of size 300 x Item68 98.00 sqm
300mm.
Single Leaf Door with vision with a guaranteed of 120 minutes fire rating (Please note :- The contractor should give the guarantee bond of fire rating).
Note:- Surface area of shutter including door frame in elevation (one side Only) shall be measured for payment..
Providing and fixing in position double, leaf fire check doors and frames at all levels of approved make ( navior, sukrti, iCLEAN ) , design, finish, tested and
certified at CBRI, Roorkee or equivalent as approved. complete in all respect as per specifications and direction of Engineer-In-Charge and consisting of :-
a) Pressed male door frames manufactured from 1.6mm(16gauge) thick galvanised steel sheet confirming to IS 277(2003) of double rebate profile of size
minimum( 143mm X 57 mm) finished with 'H' -primer
b)minimum 46mm thick G.I. fire check door of 120 minutes fire rating conforming to BS:476 part 22 & IS : 364 part II fabricated with 2 nos. 1.2mm
thick(18 gauge) galvanised sheet with infill of fire rated properitory insulation filler bonded to both faces of sheet with lock seam joints at style edges and
internal reinforcement at top, bottom and style edges and internal reinforcement at top bottom and style edges for fire rating .
c)The door frames and door shutters shall be primed with 'H' primer and finished with PU/Powder coated . The shutter would be mounted with SS Ball
Bearing Hinges of size 100mm x 75mm x 3.0mm of Becker Fire Solutions ( 4Nos per leaf ),appropriate openings for vision panel glass. Prototype Test
certificate for a test carried out earlier at CBRI Roorkee or as approved equivalent for fire rating of doors, shall be attached along with manufacturers test
certificate.
d) All door shall be factory made including hardwares i.e. hinges, panic bar, door closer, lock, handles etc as desired with necessary reinforcement and
direction of Engineer in charge.
69.00 e) Minimum 5 mm thick Pyron /pyrobeck / Central/Saint Gobain Fire Rated Clear Non Wired Glass of 120 minutes rating one on each leaf of size 300 x Item69 225.00 sqm
300mm.
Double Leaf Door with vision with a guaranteed of 120 minutes fire rating (Please note :- The contractor should give the guarantee bond of fire rating).
Note:- Surface area of shutter including door frame in elevation (one side Only) shall be measured for payment..
Providing and fixing stainless steel (grade 304) tower bolts of Yale 254 /Dline-Carl - F / Hafele/ DORMA make or approved equivalent with necessary
screws etc complete.
70.00 In stainless steel satin / polished finish Item70 1064.00 Each
250 x10 mm
Providing and fixing stainless steel (grade 304) tower bolts of Yale 152 Dline-Carl - F / Hafele/ DORMA make or approved equivalent with necessary
screws etc complete.
71.00 In stainless steel satin / polished finish Item71 1064.00 Each
150x10 mm
Providing and fixing stainless steel (grade 304) tower bolts of Yale 100/ Dline-Carl - F / Hafele/ DORMA make or approved equivalent with necessary
screws etc complete.
72.00 In stainless steel satin / polished finish Item72 105.00 Each
100x10 mm
Providing and fixing bright finished 100 mm mortise latch and lock with six levers in stainless steel satin finish and a pair of stainless steel lever handles of
73.00 make Hafele make (article no. 911.02.165, 916.96.006, 903.99.058) / Dorma (Pure 8100) /Yale make (article no. YTL-030+38P3+60MMDPSN-S) or Item73 283.00 Each
approved equivalent make with necessary s.s. screws etc. complete as per direction of Engineer in charge.
Providing and fixing bright finished 100 mm mortise latch in stainless steel satin finish with one dead bolt and pair of stainless steel (grade 304) lever
handles with necessary s.s. screws etc. complete Hafele make (article no. 911.02.165, 916.96.006, 903.99.058) / Dorma (Pure 8100) /Yale make (article
74.00 no. YTL-030+38P3+60MMDPSN-S) or approved equivalent make with necessary s.s. screws etc. complete as per direction of Engineer in charge. Item74 109.00 Each
Providing and fixing Stainless Steel (grade 304) floor door stoppers in stainless steel satin finish (Twin) of Dorma(TZ-5000)/Hafele make (article
75.00 no.937.13.53033/ Yale or equivalent) make with necessary ss screws etc. or approved equivalent make with necessary s.s. screws etc. complete as per Item75 1064.00 Each
direction of Engineer in charge.
Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the
body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1100 mm), with double speed adjustment with necessary accessories and screws
76.00 etc. complete. The manufacturer certificate for Life cycle of the door closer has to be 500000 cycle tested certificate has to be submitted by agency) . Item76 1043.00 Each
Dorma(TS-68)/Hafele make (article no.DCR 1824 FR/ Yale -931.84.659 or equivalent)
Providing and fixing wooden moulded beading to door and window frame with iron screws, plugs and priming coat on unexposed surface etc. complete.
77.00 ( 2nd class teak wood) Item77 4004.00 metre
50x20mm or 80x12.5mm as desired
Providing and fixing Toilet cubicles as under with door, pilaster and divider of 18mm thick board both side decorative compact laminate of required
colour ,shade and sizes as manufactured by Besco Merino or T Line or Greenlam Sturdo or equivalent as approved, including stainless steel
accessories ( SS-304 grade) like square top rail. Front panel and divider wall with stripe shoe touching floor (No gap shall be at bottom of divider/front
panel except door), knob, thumb turn and indicator, twin coat hook, door stopper, adjustable shoe, gravity hinges, and locking arrangement, SS channel
etc as desired. all complete as per drawings. The cubical unit shall be installed in approved finish, shades and colours as per specifications and direction
of Engineer in charge. The cubical unit shall be minimum 10 years guarantee for the board against any moisture and 5 years guarantee for the hardwares.
78.00 L-shape toilet cubicles of size 900mm (width) X 1500mm (depth) X 2100mm (height) with door ,External Laminate finish = Metallic Item78 232.00 Each
Providing and fixing Toilet cubicles as under with door, pilaster and divider of 18mm thick board both side decorative compact laminate of required
colour ,shade and sizes as manufactured by Besco Merino or T Line or Greenlam Sturdo or equivalent as approved, including stainless steel
accessories ( SS-304 grade) like square top rail. Front panel and divider wall with stripe shoe touching floor (No gap shall be at bottom of divider/front
panel except door), knob, thumb turn and indicator, twin coat hook, door stopper, adjustable shoe, gravity hinges, and locking arrangement, SS channel
etc as desired. all complete as per drawings. The cubical unit shall be installed in approved finish, shades and colours as per specifications and direction
of Engineer in charge. The cubical unit shall be minimum 5 years guarantee for the board against any moisture and 5 years guarantee for the hardwares.
79.00 I-shape toilet cubicles of size 900mm (width) X 1500mm (depth) X 2100mm (height) with door ,External Laminate finish = Metallic Item79 38.00 Each
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be
80.00 measured). Item80 2065.00 sqm
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured)
81.00 rectangular or square: Item81 1988.00 sqm
82.00 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).: Item82 1320.00 sqm
Providing and fixing aluminum tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to
83.00 required colour or shade, with necessary screws etc. complete : Item83 105.00 Each
250x10mm
Providing and fixing aluminum tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to
84.00 required colour or shade, with necessary screws etc. complete : Item84 208.00 Each
150x10mm
Providing and fixing in wall partition/lining medium density fibre board IS:14587:1998 marked, Pre-laminated one side decorative lamination and other
85.00 side balancing lamination, with necessary fixing arrangement and screws/ 3M tap etc. complete. Item85 250.00 sqm
18 mm thick
Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special
section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide
having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm center to center with dash fastener of 12.5 mm
dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other
flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610mm center to center by 6 mm
dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs
at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels
at the spacing of 300 mm centre to centre. . The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing
channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using
metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at
86.00 corner (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer Item86 350.00 sqm
in charge all complete.
75 mm overall thickness full height partition with 12.5 mm thick double skin fire rated gypsum board of approved make conforming to IS: 2095: part I
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.
87.00 125 mm Item87 334.00 Nos
Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the
88.00 side hung windows as per direction of Engineerin- charge complete. Item88 104.00 Nos
355 X 19 mm
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed
together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking
with push and pull operation complete, including fastners , nut bolt , scaffolding, the cost of providing and fixing necessary 27.5 cm long wire springs
89.00 manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 -part 1 and M.S. top cover of required thickness for rolling Item89 154.00 sqm
shutters.
80 x 1.20mm M.S. laths with 1.20mm thick top cover
90.00 Providing and fixing ball bearing for rolling shutters. Item90 52.00 Each
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of
91.00 grill to be measured).. Item91 49.00 sqm
Extra for Providing mechanical device chain and cranks operation for operating rolling shutters exceeding 10 sqm and upto 16.80 sqm in the area
92.00 Item92 154.00 sqm
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer
93.00 using structural steel etc. as required. Item93 16785.00 Kg
In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer
94.00 using structural steel etc. as required. Item94 123387.00 Kg
In gratings, frames, guard bar, ladders, railings, louvers, insert ,brackets, gates etc and similar works.
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works,including applying
95.00 priming coat of approved steel primer. Item95 23241.00 Kg
M.S. tube .
Providing, Fabricating, Assembling, Painting, Hoisting and Erecting in position including detailing of Tubular Structure, Purlins/ rafters consisting of MS
Steel tubular/hollow sections including , ISI marked from TATA/ SAIL / RINL/ Jindal/ Apollo/ Hi Tech or as approved make, conforming to IS 1161/4923,
Grade YST 310 and Rolled section & plates conforming to IS 2062 (Grade YST 250) in the profile shaped as per approved drawings with special plate
connector, pinion joints, Plates, hollow sections etc. using SAW/MAW/MIG welding process, including transportation, cutting, threading, machining, all
leads and lifts up to all heights, tools and plants and necessary scaffolding etc. required for all operations involved.
The structural members shall be painted ( external surface only) with 320 DFT anti-corrosive protection coating using as approved make with first coat of
primer barrier Zep grey 60 microns thick, second coat with Penguard express MIO red 180 microns thick and final coat of polyurethane paint 80 microns
thick (to be applied in two coats) with hard top XP white of which first coat shall be at ground and second coat after erection including touch-up of
damaged area of already painted surfaces if any, upto all heights including preparation of surface with grit/sand blasting upto Sa 2.5 grade (at least) of the
structural steel member and thorough cleaning of the surface before application of primer/paint.
96.00 The item shall be executed as per approved drawings and direction of the Engineer-in-Charge complete. (Note: The work shall be executed as per Item96 8622000.00 Kg
manufacturer's specifications wherever applicable, relevant code of practice and sound engineering practice).
(Please note that the quoted rate is inclusive of lifting as required by using cranes of adequate capicity and scaffolding or by any other means complete
in all respects.)
Providing, Fabricating, Assembling, Hoisting and Erecting in position including detailing of Tubular Structure for façade/ other location as per drawing/
site requirement work of MS Steel tubular/hollow sections including , ISI marked from TATA/ SAIL / RINL/ Jindal/ Apollo / Hi-tech or as approved make,
conforming to IS 1161/4923, Grade YST 310 and Rolled section & plates conforming to IS 2062 (Grade YST 250) in the profile shaped as per approved
drawings with special plate connector, pinion joints, Plates, hollow sections etc. using SAW/MAW/MIG welding process, including transportation, cutting,
threading, machining, all leads and lifts up to all heights, tools and plants and necessary scaffolding etc. required for all operations involved including
applying a priming coat of approved steel primer etc.as required .
The item shall be executed as per approved drawings and direction of the Engineer-in-Charge complete. (Note: The work shall be executed as per
manufacturer's specifications wherever applicable, relevant code of practice and sound engineering practice).
97.00 (Please note that the quoted rate is inclusive of lifting as required by using cranes of adequate capacity and scaffolding or by any other means complete Item97 1349498.00 Kg
in all respects.)
Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, angle , MS plate, Placed along the walls, ceiling
and floor in a grid pattern with spacing as per drawing both ways (vertically & horizontally) or at required spacing near opening, with necessary welding
at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening
98.00 for doors, windows, electrical conduits, switch boards etc. Including providing with two coats of approved steel primer etc. complete, all as per direction Item98 7500.00 Kg
of Engineer-in-charge.
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junction and corners , all
99.00 necessary fittings complete, including applying a priming coat of approved steel primer. Item99 100.00 sqm
Using M.S angles 40x40x6mm for diagonal braces.
100.00 Providing and fixing bolts of grade 10.9 conforming to IS 1367(Part 1/2/3) including nuts and washers complete. Item100 500.00 Kg
Structural Steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of
101.00 approved steel primer all complete Item101 3430.00 Kg
Structural Steel work in riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying
102.00 a priming coat of approved steel primer all complete. Item102 1.00 Kg
62 mm thick cement concrete flooring with concrete hardener topping under layer 50 mm thick cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size) and top layer 12 mm thick Hardcrete cement hardener consisting of mix 1:2 (1 cement hardener mix : 2
graded stone aggregate 6mm nominal size) by volume hardening compound is mixed @ 2 litre per 50 kg of cement or as per manufacturers
103.00 specifications. This included cost of cement slurry, but excluding the cost of nosing of steps etc. complete. Item103 4838.00 sqm
Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (1 Cement: 3 coarse sand) finished with a floating coat of neat cement.
104.00 18 mm thick Item104 379.00 sqm
Providing and fixing glass strips in joints of terrazo/ cement concrete floors.
105.00 40 mm wide and 4 mm thick Item105 14514.00 metre
Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab
106.00 including rubbing polishing and groove complete with base of cement mortar 1 : 4 ( 1 cement : 4 coarse sand) : Item106 5400.00 sqm
25 mm thick
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and
107.00 jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing polishing and groove complete. Item107 775.00 sqm
Epoxy Flooring
Surface Preparation Cleaning of surface free from dust. Dirt, moisture, oil & all foreign material from the floor. For floor cleaning all mechanized
equipments are to be used like scrubber, sanders, hot air blowers, vacuum cleaners, moisture test machine etc. Once cleaned, the surface is roughened
to prepare the surface for application of epoxy primer.
Levelling with self levelling epoxy screed Application of epoxy primer over prepared surface and then filling of cracks, crumbled joints small size damages
in the epoxy floor with epoxy mortar having high compressive strength. Epoxy primer should be applied at minimum 0.15kg/sqm . It should be so applied
so as to acheve level of – 1 mm from adjoining top level of epoxy floor surface once the epoxy screed (minimum 1.0mm thick) applied.
The epoxy resin based solvent free primer should have surface drying time of <4 hours and should have minimum solid content of 40% & should be
applied over uniform concrete floor surface.
Epoxy Coating – Providing and applying high strength, high solid epoxy mortar surface. The epoxy mortar should be applied to minimum thickness of
108.00 1mm and should have minimum hardness of 70-80, adhesive strength of >2Mpa(shall be applied as per manufacturer's specification). Item108 1340.00 sqm
Providing and applying solvent free epoxy self levelling topping to give smooth, uniform, excellent broom/anti skid finish. Epoxy self levelling topping,
should have minimum tensile strength of >15 Mpa; floor traffic in 24 hours and should be applied to minimum thickness of 1mm, as per munufacturer's
specification, complete as directed. Contractor shall give 5 years guarantee for epoxy floor .
Providing and laying Digital Placement of Color / 100% Solution Dyed Nylon 6.6 carpet tiles ( anti static ) Tufted level Loop Pile tiles shade and pattren as
approved make & size 500 x 500 mm / 600 x 600 mm with protective stain treatment(s), soil protection to repel and resist Stain and Anti Microbial
treatment, Appearance Retention Rating (CRI 101) for severe use with PVC free backing having min. face eight of 10 gsm conforming to ASTME – 648
109.00 Flooring Radiant Panel Class I grade including fixing with Volatile Organic Compound (VOC) Free Adhesive etc. complete as per drawing and directions of Item109 8716.00 sqm
Engineer-In-Charge.
.
Providing and laying full body / homogenous/ double charge Vitrified tiles ( Polish / satin Finish/ anti skid) in floor with different sizes ( thickness to be
specified by the manufacturer),with water absorption less than 0.08% and confirming to IS; 15622, of approved brand & manufacturer, in all colours and
shade, laid with cement based high polymer modified quick set tile adhesive ( water based ) conforming to IS; 15477 , in average 6mm thickness,
110.00 including grouting of joints .( payment for grouching of joints to be made separately) Item110 16982.00 sqm
satin finish Vitrified Tile
Size of Tile 600 x 600 mm
Providing and laying full body / homogenous/ double charge Vitrified tiles ( Polish / satin Finish/ anti skid) in floor with different sizes ( thickness to be
specified by the manufacturer),with water absorption less than 0.08% and confirming to IS; 15622, of approved brand & manufacturer, in all colours and
shade, laid with cement based high polymer modified quick set tile adhesive ( water based ) conforming to IS; 15477 , in average 6mm thickness,
including grouting of joints .( payment for groughting of joints to be made separately)
111.00 satin finish Vitrified Tile Item111 30494.00 sqm
Size of Tile 800 x 800 mm
Providing and laying full body / homogenous/ double charge Vitrified tiles ( Polish / satin Finish/ anti skid) in floor with different sizes ( thickness to be
specified by the manufacturer),with water absorption less than 0.08% and confirming to IS; 15622, of approved brand & manufacturer, in all colours and
shade, laid with cement based high polymer modified quick set tile adhesive ( water based ) conforming to IS; 15477 , in average 6mm thickness,
including grouting of joints .( payment for groughting of joints to be made separately)
112.00 satin finish Vitrified Tile Item112 28127.00 sqm
Size of Tile 1000 x 1000 mm
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and
conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps,dado laid with cement based high polymer
modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of
113.00 joints to be made separately). Item113 2693.00 sqm
Polish finish vitrified tile
Size of Tile 600 x 600 mm or 300x600mm
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and
conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, dado laid with cement based high polymer
modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of
114.00 joints to be made separately). Item114 5662.00 sqm
Polish finish vitrified tile
Size of Tile 800 x 800 mm or 800x1200mm
Providing and laying matt finished vitrified tile of size 100x100x16mm having water absorption less than 0.5% and conforming to IS: 5622 of approved
make in all colours and shades in out door floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4
115.00 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as Item115 2580.00 sqm
direction of Engineer-in-Charge.
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622
of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing
116.00 with grey cement slurry @ 3.30kg/sqm including pointing the joints with white cement and matching pigment etc., complete.. Item116 833.00 sqm
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all
colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm
117.00 thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement Item117 2901.00 sqm
mixed with pigment of matching shade complete.
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.5% and
conforming to IS: 15622, of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on
118.00 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with Item118 1969.00 sqm
matching pigments etc. complete as per direction of Engineer-in-Charge.
Providing and fixing 18mm thick gangsaw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window
sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4
coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing,groove, curing moulding and
119.00 polishing to edge to give high gloss finish etc. complete at all levels.. Item119 318.00 sqm
Granite of any colour and shade (Area of slab over 0.50 sqm)
Providing edge moulding to 18 mm thick marble/ granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc.
120.00 complete as per design approved by Engineer-in-charge. Item120 365.00 metre
Granite work
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ stone
121.00 work including necessary holes for pillar tabs etc including rubbing & polishing of cut edges etc complete Item121 289.00 Each
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete
as per the architectural drawings, laid over 15 mm (average) thick correction layer base of cement mortar 1:4 (1 cement: 4 coarse sand) followed by
laying and fixing with high polymer modified quick set adhesive of make Ferrouscrete / Pidilite/ Ardex Endura / MAPEI / MYK Laticrete or equivalent
with average 6mm thickness and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including
122.00 groove, rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Item122 9246.00 sqm
Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent as approved.
Providing and fixing machine cut, mirror/ eggshell polished , granite stone work for wall lining (veneer work) , dado, skirting, risers of steps etc., in
required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3
coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching
123.00 shade, including groove ,rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Item123 1538.00 sqm
18mm thick Granite in all shade / colour / size (Area of slab over 0.50 sqm) as approved by Engineer in charge.
Providing and laying Polished Engineered marble stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all
complete as per the architectural drawings, laid over 15 mm (average) thick correction layer base of cement mortar 1:4 (1 cement: 4 coarse sand)
followed by laying and fixing with high polymer modified quick set adhesive of make Ferrouscrete / Pidilite/ Ardex Endura / MAPEI / MYK Laticrete or
equivalent with average 6mm thickness and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade,
124.00 including groove,rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Item124 3516.00 sqm
18mm thick Engineered marble stone in all shade / colour / size (Area of slab over 0.50 sqm) as approved by Engineer in charge..
Providing and fixing machine cut, mirror/ eggshell polished , Engineered marble stone work for wall lining (veneer work) including dado, skirting, risers of
steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1
cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of
125.00 matching shade, including groove, rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Item125 1538.00 sqm
18mm thick Engineered marble stone in all shade / colour / size (Area of slab over 0.50 sqm) as approved by Engineer in charge...
Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of
approved shade, colour and texture in footpath, flooring in road side plazas, forecourt area, Kerb area and similar locations,laid over 15 mm (average)
thick correction layer base of cement mortar 1:4 (1 cement: 4 coarse sand) followed by laying and fixing with high polymer modified quick set adhesive
of make Ferrouscrete / Pidilite/ Ardex Endura / MAPEI / MYK Laticrete or equivalent with average 6mm thickness including grouting the joints with
126.00 white cement mixed with matching pigment, epoxy touch ups, groove etc. complete as per direction of Engineer-in-Charge. Item126 1102.00 sqm
30mm thick Granite in all shade / colour / size (Area of slab over 0.50 sqm) as approved by Engineer in charge.
Extra for Flamed/Sand blasted/ Leather finish finishing in place of polished marble/granite stone as per approved by Engineer in charge., complete at all
127.00 levels Item127 771.00 sqm
Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in
combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per
the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and
jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including
128.00 groove, rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Item128 6030.00 sqm
18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Bottochino, Fire Red or Dark Emperadore or equivalent as approved etc.
Providing and fixing machine cut, mirror / eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc.,
in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1cement : 3
coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching
129.00 shade, including groove,rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Item129 58.00 sqm
18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Bottochino, Fire Red or Dark Emperadore or equivalent as approved etc.
Providing & fixing in position Phenol bonded Bamboo wood flooring with planks of sizes 14mm thick, 1800mm length (minimum) and 130 mm
wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology
Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded poly
ethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of
130.00 size 1900mm x 44mm, wherever required. The bomboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Item130 2929.00 sqm
Eco friendly UV coating, all complete as per direction of Engineer in-charge.
Providing & fixing in position Phenol bonded Bamboo wood in wall skirting with planks of sizes 14mm thick, 1900mm length (minimum) and 85mm
wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology
Promotion Council (BMTPC). The skirting shall be fixed with SS screws & rawl plugs, over underlayment of 4mm thick, expanded poly ethylene foam
131.00 sheets having 40kg/cum density over prepared surface. The bomboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness Item131 163.00 sqm
1000 Kgf. with Eco friendly UV coating, all complete as per direction of Engineer in-charge.
Providing & fixing in position Phenol bonded Bamboo wood wall cladding at all height with planks of sizes 10mm thick, 1800mm length (minimum) and
130 mm wide (minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials &
Technology Promotion Council (BMTPC), with necessary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class
teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid
over backlayment of 1.00 mm thick expanded poly ethylene foam of density 40kg/cum in two layers, first layer on wall surface before fixing wooden
132.00 frame and second layer on frame under cladding. The bomboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. Item132 330.00 sqm
with Eco friendly UV coating, all complete as per direction of Engineer in-charge..
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial
emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and
grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete,
133.00 including providing skirting upto 150 mm height along the parapet walls in the same manner. Item133 3261.00 sqm
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand ( Zone III) : 4 graded stone aggregate) finished with a floating coat of neat cement, including
134.00 cement slurry, but excluding the cost of nosing of steps etc. complete. Item134 934.00 sqm
40 mm thick with 20 mm nominal size stone aggregate
Providing and laying aluminum dust buster matting (whipping & scrapping -moisture & dirt recessed ) for main entry as per manufacturer specifictions
135.00 and direction of Engineer in charge. Item135 126.00 sqm
Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto
1mx1m, fixed to structural steel frame work and / or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per
Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately)..
136.00 Red sand stone - 30mm thick gang saw cut stone . Item136 3004.00 sqm
Providing and fixing dry cladding at all heights with 30mm thick gang saw cut stone as approved fixed to RCC/ Masonry surface with the help of stainless
steel cramps of required shape and size, pins etc. and sealing the joints with approved weather sealant including grouting the frame work/cramps/pins,
maintaining the grooves in stone slabs as per the drawing and filling the same with non-staining, non-streaking silicon joint sealants of approved make,
including backer rod, drilling, anchoring, grouting, scaffolding, edge polishing, groove,chamfering to received tapered stone and providing and applying
coating on external surface of stone with solvent based silicone sealant of approved make as per manufacturer's specifications etc., all complete as per
architectural drawings and direction of Engineer in charge. (Only exposed surface will be measured for payment. The stainless steel cramps and pins shall
137.00 be paid for separately). Item137 9461.00 sqm
30mm thick Granite in all shade / colour / size (Area of slab over 0.50 sqm) as approved by Engineer in charge.
Providing and fixing adjustable stainless steel cramps of approved quality of Hilty or as approved equivalent make of required shape and size, adjustable
with stainless steel nuts, bolts and washer (total weight not less than 260 gms , Clamp of 304 grade wherein pin of 316 grade, clamp body min 5mm thick
and shall carry a dead load of 79.5 kgs at min offset, clamp available with variable offset lengths from 50-65mm or as desired for stone dry stone
cladding fixed at suitable location, including making necessary recesses in stone slab, drilling required holes etc. complete as per direction of the
Engineer-in-charge. Clamps shall be fastened by ETA Approved anchor suitable to be used on AAC blocks/CC hollow blocks/fly ash brick/ RCC Column /
138.00 beam work comprising of polyamide PA 6 grade sleeve and stainless steel (304) grade double threaded screw with hexagonal head. Item138 37395.00 Each
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of
hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.
139.00 600mm x 600mm tiles Item139 20278.00 sqm
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of
hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.
140.00 800mm x 800mm tiles Item140 38615.00 sqm
Providing and applying silicone based water repellent over the sand stone/ granite stone cladding for all height confirming to BS: 6477-1984 including
cleaning the surface making it free from dirt, oil grease , wax and all other contamination using mechanical tool , wire brush , compressed air followed by
141.00 water washing and as per the manufacturer specification and driection of Engineer-in-charge.. Item141 12216.00 sqm
Two or More coats .
Extra over and above C & C router design pattren for Dry sand stone cladding refer drawing no LKO-INT-08 with all respect as desired as per
142.00 manufacturer specifications and direction of Engineer in charge.( payment shall be paid of actual area of C & C router design pattren.) Item142 3004.00 sqm
Designing ,Providing and fixing KALZIP/ KINGSPAN RIGIDAL 65/400 “SELF SUPPORTED” CONCEALED FIX ALLUMINIUM STANDING SEAM ROOFING SYSTEM
OF KALZIP/ Kingspan Rigidal or equivalent as approved IN 0.9 MM THICK AA 3004 aluminum ALLOY, comprising of the following layers.
i) Top Layer – KALZIP/ Kingspan Rigidal 65/400 or equivalent profiled sheeting manufactured from aluminum alloy AlMnlMgl as specified in BSEN
1396:2007 – Quality AA 3004, minimum thickness of 0.9 mm and PVDF coating on the exposed surface and finish as approved by Engineer-in-Charge.
ii)The insulation shall be 125 mm thick (laid in two layers of 75 & 50 mm with vapour barrier (Reinforced on one side aluminum foil) fiberglass with
minimum density 24 kg/m3 or Rockwool with minimum density 64 kg/m3 to achieve minimum U value of 0.27 W/m2 K,and minimum R- Value of
insulation -3.70sqm-k/w with 10mm thick multipurpose cement board between two insulation layers as approved by Engineer-In-Charge.
iii) 1 layer of vapour control barrier – Polyethylene film of 0.20mm thick, heavy duty type.
iv) The perforated liner sheet (high rib) is manufactured from o.50mm base metal thickness (BMT) and 0.55mm total coated thickness (TCT) of Tata Blue
scopic/Lloydeck / Trimdek or equivalent . The perforation should be miniumum 22% with non woven acoustic paper for acoustic properties. The panel
shall be of 980-1015mm effective cover width, 28-30mm rib height, 190- 203 mm pitch, manufactured out of Hi tensile pre-painted Zincalume/Galvalume
steel-AZ150 (min. 150 gms/sq.mt total on both sides) having minimum yield strength of 550 MPa with Super durable Polyester /SMP or approved
equivalent quality paint coat as per AS/NZS 2728 Class 3.
v) The entire Double skin system is installed over the structure purlin. The measurement shall be based on finished/covered surface area. The contractor
shall prepare the shop drawings based on the drawings supplied by the Engineer-in-charge for approval. The rate shall includes for flashings, sealants and
work shall carried out by specialized agency. (The erection / fixing / installation shall be done by specialized agency as per approved list).
143.00 vi) Item includes supplying, installation and fixing of profiled aluminum sheeting including cost of system accessories insulation, vapour barrier, liner Item143 58915.00 sqm
sheet,cement board, fasteners, gaskets, brackets, screws, rivets, sealants, flashing at all location including sky light etc,grattings, inner closure fillers,
fixtures, all machineries and all taxes, i.e., custom duty,GST etc etc., complete as desired. The above work is to be carried out by a specialized agency
approved by the Engineer-in-Charge.
Aluminum gutter:
Providing and fixing of 2 mm thick aluminum gutter with double side vulcanised rubber Expansion joints at every 12m length. Necessary down take
spout with diameter upto 150/300 mm at required intervals & other accessories like Cover plate, end caps, bracket for gutter support as desired
spacing and welding at joints. The Girth of gutter would be upto 4200mm. Dye Penetration test to be conducted wherever aluminum welding has been
144.00 done complete job with all respect as per detailed drawings and as per the direction of Engineer-in-charge. Item144 1181.00 metre
Walkways Sysem:
Supplying & Fixing of safe Walkway system of make Kalzip, Latchways, Capital safety, Honeywell, Karam, Kartosar or approved equivalent make for
safe walking over the roof on standing seam profile roof system of KALZIP with a seam to seam distance of 400 mm. The Walkways are to be made in
FRP/uPVC with aluminum accessories, SS nut-bolts and fasteners. The system must confirm BS EN 516-2016. The rate includes supporting equipment
such as Ladder/Elevated Works Platform (EWP) /Lifting tool/Scaffolding etc and as per Technical Specifications for this item as detailed in this tender.
The walkways system shall be manufactured from FRP Pultruded Grating/uPVC The complete system shall be planned, designed and fixed at site to
146.00 cater all along the roof periphery like exhaust fan, louvers, skylights and gutters of the roof etc.,complete the job with all respect as desired and as per Item146 820.00 metre
the direction of Engineer-incharge.
Roof Hatch :
Supply and fixing of Roof Hatch (Nystrom or equivalent as approved Make) of Aluminium Mill Finish.The specification are as under:
Leaf – Single Leaf
Opening Size – 914 x 914 mm
Material – Aluminium Cover & Frame in 11 Gauge (2.3mm thick)
Cover – Hollow 25mm, concealed with Fibreglass insulation, fully welded at all corners, internally reinforced for 40 psf live load
148.00 Curb – Height 305mm with integral cap flashing, 25mm Fibre Board Insulation, fully welded at all corners, mounting flange for securing hatch to roof. Item148 2.00 each
EPDM Gasket – EPDM gasket fixed to the cover.
Hinge – Heavy duty Pintle Hinge with SS-316
Providing and fixing Lloyd Superdeck /LYSAGHT Ezydek or approved equivalent profile 1.2mm thick TCT colour coated galvanized steel having minimum
240-245MPa yield strength as per IS 513 with a crest height of 44 to 51 at a pitch distance of 130 to 316mm c/c having a cover width of 760 to 960mm.
The galvanization shall be minimum 275 gm per sqcm as per IS 277 with colour coating of polyester quality paint of 20 microns over the primer coat of 5
microns on the exposed side and 5 microns alkyde coat over 5 microns primer coat on the inner side/ hot dipped zinc coating of 275 gm/sqcm on both
149.00 sides confirming to AS 1397 and BS EN 10147:2000 complete the job with all respect as desired and as per the direction of Engineer-incharge.. Item149 4729.00 sqm
Providing and fixing roof cutout / sky light /canopy as per drawings with multicell Polycarbonate sheet as approved make of minimum thickness 20 mm
with 5 cells-6 wall structure having wall flange and supporting wall thickness as per manufacturer specifications. Extruded translucent panels with
vertical standing seam at both sides of panels with Snap-on connector to interlock the panels with a double tooth grip-lock mechanism or aluminium
system (with top plate and Bottom plate to be fixed with a self tapping screw) and EPDM gaskets to ensure maximum uplift capability including End-
cap/Aluminium U-Profile (mill finish) for ends. Panels /sheets shall be co-extruded UV protected with anti-glare color/ coating on one side to prevent
glare and shall face sun/ top. The panels shall be fixed to pre installed structural M.S.frame work and be secured with snap-on connectors at all levels
including all accessories like screws, washers, flashing, trims etc complete to make a water tight cutout / sky light/canopy including transportation, lift,
scaffolding, etc. conforming to specifications and directions of Engineer-in-Charge.
150.00 The Items includes supplying, Installation and fixing of multicell polycarbonate sheet over structural frame work, Labours, Scaffolding, all required Item150 3250.00 sqm
machineries for fixing, tools, weather sealants, aluminium channel, screws with pvc fillets, masking tape, protective tape, backer rods, bolts, gasket, etc.
complete in all respect as desired asper approved drawing/ direction of Engineer in charge.( M.S. Structural steel frame work shall be paid seperately the
respective item.)
Providing and fixing GI Clip in Metal Ceiling System of 600x600/ 600x1200 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20
mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre,
suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs
of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and
width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of
suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be
galvanized @ 120 gms/sqm (both side inclusive),fixing with clip in tiles into spring ‘T’ with
151.00 GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having Item151 57886.00 sqm
galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester
powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation .
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and
galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with
flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia
bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle
hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm
thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction
perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing
perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of
rawl plugs at 450 mm centre, with 25mm long dry wall screws @
230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230
mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes ,
152.00 finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per Item152 18278.00 sqm
manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter
channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with
12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I
Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size
595x595 mm of approved texture, design and patterns.having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance
of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal
conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped
galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 mm reveal profile (white/black),comprising of
main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42
mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per
sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of
153.00 size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help Item153 28527.00 sqm
of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as
per directions of the Engineer-in-Charge.
Note: With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles..
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have
Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in
true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm )
comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size
15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50
mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size
85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall
angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm
154.00 long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, Item154 2123.00 sqm
for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.
With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7)
Providing and fixing U Baffle Aluminum panel ceiling as approved make ( Hunter Douglas , Durlum, SAS, Lindner, New Age ) of approved RAL colour
consisting of panel size 200 mm deep X 50 mm width using minimum 0.7 mm thick aluminum and 360mm center to center as per drawings enclosed ,
Pure Polyester Powder Coated, Aluminum alloy AA 3105 (Al. Mg) for higher strength . Panels shall be connected using friction grip upper and lower
bracket on a special carrier of 30 mm wide x 30 mm high x 2 mm thick powder coated GI member as approved colour to form as cassette based on the
module of 360mm c/c which shall be downward accessible with a torsion springs/ or special bolted bracket hanger system in group of panel or as
desired.
Main Runners: All vertical baffles are attached to factory punched 30x30x2.0mm Thk black Powder coated G.I member with the special baffle
hangers/springs to form a module of 360mm C/C.
Cross Runners: 30 mm wide x 30 mm high x 2 mm thick powder coated GI member as approved colour designed to interlock baffle section on designated
spacing are spaced at 1200mm Center maximum.
Suspension System : The complete frame to be suspended using special bracket with M6 threaded rod as desired length or as per detailed drawings .
155.00 Paint Finish: All baffles to be Pure Polyester Powder Coated to RAL Shades as confirmed/approved by Engineer-in-charge.. Item155 17043.00 sqm
The panels shall be fixed to pre installed structural M.S.frame / RCC work at all levels including all accessories like Fasteners, Hangers, screws, washers,
etc at site complete with all respect as desired . conforming to specifications and directions of Engineer-in-Charge .Contractor shall give 10 years
guarantee for entire system including Pure Polyester Powder Coating.
The Items includes supplying, Installation and fixing of U Baffle Aluminum panel ceiling over MS structural frame / RCC work, Labours, Scaffolding all
required machineries for fixing tools, Fasteners, Hangers, screws, washers, etc complete in all respect as desired. ( M.S. structurer/ frame work shall be
paid seprately under relevant item )
Providing and fixing U Baffle Aluminum panel ceiling as approved make ( Hunter Douglas , Durlum, SAS, Lindner, New Age ) of approved RAL colour
consisting of panel size 200 mm deep X 50 mm width using minimum 0.7 mm thick aluminum and 200mm center to center as per drawings enclosed ,
Pure Polyester Powder Coated, Aluminum alloy AA 3105 (Al. Mg) for higher strength . Panels shall be connected using friction grip upper and lower
bracket on a special carrier of 30 mm wide x 30 mm high x 2 mm thick powder coated GI member as approved colour to form as cassette based on the
module of 360mm c/c which shall be downward accessible with a torsion springs/ or special bolted bracket hanger system in group of panel or as
desired.
Main Runners: All vertical baffles are attached to factory punched 30x30x2.0mm Thk black Powder coated G.I member with the special baffle
hangers/springs to form a module of 200mm C/C.
Cross Runners: 30 mm wide x 30 mm high x 2 mm thick powder coated GI member as approved colour designed to interlock baffle section on designated
spacing are spaced at 1200mm Center maximum.
Suspension System : The complete frame to be suspended using special bracket with M6 threaded rod as desired length or as per detailed drawings .
156.00 Paint Finish: All baffles to be Pure Polyester Powder Coated to RAL Shades as confirmed/approved by Engineer-in-charge.. Item156 1417.00 sqm
The panels shall be fixed to pre installed structural M.S.frame / RCC work at all levels including all accessories like Fasteners, Hangers, screws, washers,
etc at site complete with all respect as desired . conforming to specifications and directions of Engineer-in-Charge .Contractor shall give 10 years
guarantee for entire system including Pure Polyester Powder Coating.
The Items includes supplying, Installation and fixing of U Baffle Aluminum panel ceiling over MS structural frame / RCC work, Labours, Scaffolding all
required machineries for fixing tools, Fasteners, Hangers, screws, washers, etc complete in all respect as desired. ( M.S. structurer shall be paid
separately under relevant item )
Providing and fixing U Baffle Aluminum panel ceiling as approved make ( Hunter Douglas , Durlum, SAS, Lindner, New Age ) of approved wood grain finish
consisting of panel size 200 mm deep X 50 mm width using minimum 0.7 mm thick aluminum and 360mm center to center as per drawings enclosed ,
Pure Polyester Powder Coated, Aluminum alloy AA 3105 (Al. Mg) for higher strength . Panels shall be connected using friction grip upper and lower
bracket on a special carrier of 30 mm wide x 30 mm high x 2 mm thick powder coated GI member as approved colour to form as cassette based on the
module of 360c/c or as per manufacturer specifications, which shall be downward accessible with a torsion springs/ or special bolted bracket hanger
system in group of panel or as desired.
Main Runners: All vertical baffles are attached to factory punched 30x30x2.0mm thick black Powder coated G.I member with the special baffle
hangers/springs to form a module of 360mm C/C.
Cross Runners: 30 mm wide x 30 mm high x 2 mm thick powder coated GI member as approved colour designed to interlock baffle section on designated
spacing are spaced at 1200mm Center maximum.
Suspension System : The complete frame to be suspended using special bracket with M6 threaded rod as desired length or as per detailed drawings.
Paint Finish: All baffles to be Pure Polyester Powder Coated to Wood grain Finished as confirmed/approved by Engineer-in-charge.
157.00 The panels shall be fixed to pre installed structural M.S.frame/ RCC work at all levels including all accessories like Fasteners, Hangers, screws, washers, Item157 2906.00 sqm
etc at site complete with all respect as desired . conforming to specifications and directions of Engineer-in-Charge .Contractor shall give 10 years
guarantee for entire system including Pure Polyester Powder Coating.
The Items includes supplying, Installation and fixing of U Baffle Aluminum panel ceiling over MS structural frame / RCC work, Labours, Scaffolding all
required machineries for fixing tools, Fasteners, Hangers, screws, washers, etc complete in all respect as desired. ( M.S. structurer / frame work shall
be paid separately under relevant item )
Providing and fixing U Baffle Aluminum panel ceiling as approved make ( Hunter Douglas , Durlum, SAS ,Lindner ) of approved RAL colour Finish
consisting of panel size 500 mm deep X 100 mm width using minimum 1.2mm thick aluminum and 600mm center to center as per drawings enclosed ,
Pure Polyester Powder Coated, Aluminum alloy AA 3105 (Al. Mg) for higher strength . Panels shall be connected using friction grip upper and lower
bracket on a special carrier of 30 mm wide x 30 mm high x 2 mm thick powder coated GI member as approved colour to form as cassette based on the
module of 900c/c or as per manufacturer specifications, which shall be downward accessible with a torsion springs/ or special bolted bracket hanger
system in group of panel or as desired.
Main Runners: All vertical baffles are attached to factory punched 30x30x2.0mm thick black Powder coated G.I member with the special baffle
hangers/springs to form a module of 600mm C/C.
Cross Runners: 30 mm wide x 30 mm high x 2 mm thick powder coated GI member as approved colour designed to interlock baffle section on designated
spacing are spaced at 1200mm Center maximum.
Suspension System : The complete frame to be suspended using special bracket with M6 threaded rod as desired length or as per detailed drawings.
Paint Finish: All baffles to be Pure Polyester Powder Coated to RAL Shades as confirmed/approved by Engineer-in-charge.
158.00 The panels shall be fixed to pre installed structural M.S.frame/ RCC work at all levels including all accessories like Fasteners, Hangers, screws, washers, Item158 26423.00 sqm
etc at site complete with all respect as desired . conforming to specifications and directions of Engineer-in-Charge.
The Items includes supplying, Installation and fixing of U Baffle Aluminum panel ceiling over MS structural frame / RCC work, Labours, Scaffolding all
required machineries for fixing tools, Fasteners, Hangers, screws, washers, etc complete in all respect as desired. ( M.S. structurer shall be paid
separately under relevant item )
6 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make
159.00 including groove where ever required as per the direction of Engineer-In-Charge : Item159 46589.00 sqm
12 mm cement plaster of mix :
160.00 1:6 (1 Cement : 6 Coarse sand) including groove where ever required Item160 34303.00 sqm
15 mm cement plaster on the rough side of single or half brick wall of mix :
161.00 1:6 (1 Cement : 6 Coarse sand) including groove where ever required Item161 34303.00 sqm
20 mm cement plaster of mix :
162.00 1:4 (1 Cement : 4 Coarse sand) including groove where ever required Item162 100.00 sqm
18 mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1cement : 5 coarse sand) and a top layer 6mm thick cement plaster 1:3
163.00 (1 cement : 3 coarse sand) finished with rough with sponge including groove where ever required. Item163 14719.00 sqm
Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's
164.00 specification. Item164 16176.00 sqm
Two or more coats on new work
Painting with synthetic enamel paint ,having VOC ( Volatile Organic Compound ) content less than 150 gms/litre, of approved brand and manufacture,
165.00 including applying additional coats wherever required to achieve even shade colour. Item165 1108.00 sqm
Two or more coats on new work
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming
166.00 coat, preparation of surface, etc. complete.( a) on steel work Item166 446.00 sqm
Providing and finishing walls at all heights with textured exterior finish of following specifications:
i) One coat of priming coat of exterior primer @ 2.20 lit per 10 Sqm.
ii) Application of 2mm thick Texture materials of approved pattern/finish having a minimum specific gravity of 1.9kg / liter , solid contents in the range of
82-85%.
167.00 iii) Final coats (Two or more) of Exterior paint as approved and shade @3.28 liters/10sqm.all complete as per specifications and directions of Engineer-In- Item167 14719.00 sqm
Charge..
Providing and applying white cement based putty average thickness 1mm minimum two coat ,of approved brand and manufacturer ,over the plastered
168.00 wall surface to prepare the surface even and smooth complete. Item168 83325.00 sqm
Wall painting with premium acrylic emulsion paint of interior grade having VOC ( Volatile Organic Compound ) content less than 50grams/litre of
approved brand and manufacturer, including applying additional coats wherever required to achieve even shade colour.
169.00 Two or more coats on new work Item169 131594.00 sqm
Finishing walls with Premium Acrylic Smooth exterior paint for all height with silicone additives of required shade : New work (Two or more coats
170.00 applied @ 1.43 lit /10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10sqm). Item170 5457.00 sqm
Forming groove of uniform size from 12x12mm and upto 25x18mm in plastered surface as per approved pattern using wooden battens, nailed to
171.00 the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per Item171 394782.00 metre
specifications and direction of the Engineer-in-Charge.
Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content with water thinnable
172.00 cement primer on wall surface having VOC content less than 50grames/ litre. Item172 131594.00 sqm
Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as
173.00 vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work Item173 70556.00 sqm
on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z
sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary
filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminum sections shall be smooth, rust
free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing / paneling, C.P. brass /
stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be
177.00 paid for separately): Item177 3669.00 Kg
For fixed portion
Polyester powder coated aluminum (minimum thickness of polyester powder coating 50 micron).
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z
sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary
filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminum sections shall be smooth, rust
free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing / paneling, C.P. brass /
stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be
paid for separately):
178.00 For Openable portion Item178 2082.00 Kg
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required
including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).
Polyester powder coated aluminum (minimum thickness of polyester powder coating 50 micron).
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC/neoprene gasket, aluminum snap beading,
aluminum channel etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading, channel
179.00 shall be paid in basic item) Item179 362.00 sqm
With float glass panes of 5.50/6.0 mm thick .
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC/neoprene gasket, aluminum snap beading,
aluminum channel etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading, channel
180.00 shall be paid in basic item) Item180 250.00 sqm
With toughened float glass panes of 12 mm thick
Filling the gap in between aluminum frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality
181.00 as per architectural drawings and direction of Engineer-in-charge complete. Item181 54.00 metre
Upto 5mm depth and 5 mm width
Providing and fixing anodised aluminum (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15)
182.00 sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed Item182 14.00 kg
with dash fastener of required dia and size (Dash fastener to be paid for separately).
Providing and supplying aluminum extruded tubular and other aluminum sections as per the architectural drawings and approved shop drawings , the
aluminum quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of
183.00 required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for Item183 545985.00 Kg
fabrication of extruded aluminum frame work. Nothing extra shall be paid on this account).
184.00 Designing,Providing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for
linear as well as curvilinear portions of the building for all heights and all levels, including :
a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the
proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various
thicknesses, aluminum cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants,
flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection
against fire hazard including:
b) Fabricating and supplying serrated M.S. hot dip galvanised / aluminum alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to
accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel
framework of building structure using stainless steel anchor fasteners/ bolts, nylon separator to prevent bimetallic contacts with nuts and washers etc. of
stainless steel grade 316, of the required capacity and in required numbers..
c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone
sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer
rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass
d) Providing and fixing in position flashings of solid aluminum sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to
seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure
equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete.
This item includes cost of all inputs of designing, labour for fabricating and installation of aluminum grid, installation of glazed units, T&P, scaffolding and Item184 31056.00 sqm
other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified.
The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by
Engineer-in-charge.
Note:- 1. The cost of providing extruded aluminum frames, shadow boxes, extruded aluminum section capping for fixing in the grooves of the curtain
glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this subhead. However, for the purpose of
payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places.
Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified
laboratories accredited by NABL(National Accreditation Board for Testing and Calibration Laboratories),Department of Science & Technologies, India. Cost
of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and
importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories
1. Performance Laboratory Test for Air Leakage Test (-50pa to –300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing
limit 1 to 200 mVhr”.
2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml.”
3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml”
4. Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any failure) as per ASTME-330-
10 testing method for a range upto 50 mm”
5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test” Tests to be conducted on site
6. Onsite Test for Water Leakage for a pressure range 50 kPa to 240 kPa (35psi) upto 2000ml”
Designing,Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 36.50mm thick Laminated D.G.U. consisting of
outer high performance 8mm thick heat strengthen (HS) + 16mm air gap + Inner 12.50 Laminated ( 6mm +1.52+5.0 both glass heat strengthen ( HS)
insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer 8mm thick heatstrengthen high
performance glass , of approved colour and shade with reflective soft / hard coating on surface # 2 , spacer tube 16mm wide, Inner 12.50 Laminated
( 6mm +1.52+5.0 both glass heat strenghten ( HS), dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for
the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge.
The IGUs shall be assembled in the factory/ workshop of the glass processor.“(Payment for fixing of IGU Panels in the curtain glazing is included in cost of
relevant item )“For payment, only the actual area of glass on face # 1 of the glass panels (including the areas of the grooves and weather silicone
sealant)provided and fixed in position, shall be measured in sqm.“.
(i)Glass type A - 36.50mm thick Laminated D.G.U. consisting of outer high performance 8mm thick heat strengthen (HS)/ toughened glass + 16mm air
185.00 gap + Inner 12.50 Laminated ( 6mm +1.52+5.0 heat strenghten ( HS)/ toughened clear glass (properties shall visible Light transmittance (VLT) of minimum Item185 21767.00 sqm
39%, Light reflection internal 10 to 22%, light reflection external 10 to 22 %, SHGC less than or equal to 0.24 and U value of less than 1.70 W/m2 degree K
etc).
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable
panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel
plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings,
186.00 as per the approved shop drawings, as specified and as directed by the Engineer- in-Charge. Item186 250.00 sqm
187.00 Providing and fixing 3.0m & 3.50m high aluminum frame partitions with 12.0mm thick toughened clear glass as per elevation drawings / details enclosed Item187 10624.00 sqm
with extruded
188.00 Providing, built uptesting,
fabricating, sectionsinstalling
of approved make in
and fixing confirming to alloyWall
position Curtain 63400 withWPaluminum
6063 - T6Composite
with chemical Panel composition
Cladding, withand openmechanical
grooves properties
for linearas asper
well Item188 14431.00 sqm
IS:733:1983
as curvilinear and IS 1285:2002. as per elevation / detailanddrawings enclosed. All profiles shall be pure polyester Powder Coated to 50 - 60 microns in
Extra
approved andportions
overshade above
/ colour Cof&according
the building
C router , for pattren
design all heights
to IS:137871:1993 for aluminumall levels
/ I.S. :1868,
etc. including:
composite panelwith
shall be equalisation
fixed cladding
rawl refer and
plugs drawing
s.s. no-LKO-INT-06
screws orrequired, with clips
with fixing all respect
or as desired
expansion holdastoper
Structural
manufacturer analysis & design
specifications and preparation of shop drawings for pressure or rain screen principle as proper drainage of water
fasteners
189.00 make including
it watertight filling up and
including all direction gaps
necessary
checking
of Engineer
of all the at
in charge.(
junctions,
structural and top,payment
atfunctional
bottom shall be paid
and sides
design. with ofrequired
actual area EPDMof Cgasket
& C router
(as per design
approvedpattren.)
sample) i.e. EPDM Item189 4645.00 sqm
gaskets
Providing,shall be inserted
fabricating andbetween
supply and aluminum
fixing panelframes and beading
of aluminum for glass,panel
composite as well as fromininside
cladding and out
pan shape side around
in metallic colour theofperiphery
approvedofshades the glassmade to make
out of
the glazing
(5XXX series, airH-24
and BARE
wateraluminum
tight. Any coil openabletemper) aluminum
- 4mm frame
thick door including
aluminum composite handle,
paneldoor closer, door lock, doormaterial
(0.5mm+3mm+0.5mm) stopperconsisting
etc. shall be paid under
of 3mm thick the
Providing
same item. and fixing stainless
However cost of steel ( Grade
supplying and 304) of
fixing railing
any made of Hollow
openable frameless tubes,glass channels,
door area plates
shall etc.,
be includingand
measured welding,
paid grinding, as
separately buffing,
per polishing and
actual.
FR(AlMg1)
making grade mineral
curvature (wherever core(70%
required) non and combustible
fitting theMineral
same filled
with and 30% virgin
necessary polymer)
stainless steel sandwiched
nuts and between
bolts paneli/ccladding
complete, fixing sheet
the shallwith
railing be coil
necessary
Aluminum
coated, with Vertical
Kynar &500Horizontal
based PVDFsection ( divder-both
/ Lumiflon side glass frame)
based fluoropolymer F2K1
resin – 120mm x 110mm with minimum 2.3mmcolourthickness at the back side, 2.3mm
accessories
thickness in & stainless
front and steel
with dash
2.2mm fasteners
thick , stainless
sidepolymer
walls be steel
to(Service) bolts
to RCCetc.,
fixed coating beams of(Minimum70%
required size, ofonresin)
the coating
top of theof approved
floor or thedippedsideand shade
ofGalvanized
waist on face
slab with#brackets
suitable
1( Pencil hardness
190.00 arrangement as per ENapproval
13523-2 ofis HB-F) and
Engineer-in-charge, (formembranes
payment purpose on face/only #columns
2 as
weight
& steel
specified. beams
The
of stainless peel/ columns
of strength withof hot
ACP
shallshould be 150Nmm/mm M.S. . fixing Item190 38700.00 Kg
and stainless
Stainless steel steel nutsnuts,
screws, boltsbolts,
with PVC
washers,/ Teflon separator
cleats, weather silicone between
sealant, metal
backer to metal
rods etc. joints atsteel
“weather
members
junctions.
silicone Aluminum
sealant, backer
be considered
Top,
rods Bottom
etc.
excluding
Vertical section
accessories
F2K2- 120mm such as fasteners
x 77.5mm etc.)..
The fastening brackets of(aluminum
outer frame alloy ) with
6005 minimum
T5 / MS 2.0mm
with Hotthickness at the back
Dip Galvanised withside, 2.0mm
serrations andthickness
serratedinwashers
front with minimum
to arrest the 2.0mm
wind load thickness
movement,in
side walls to be fixed to vertical section F2K1 with stainless steel screws (Grade- S.S. 304) and 3.5mm
fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as thick aluminum brackets in such a way that
aluminum
per brackets
specification and shall not be
drawing Theseenitem in includes
vision panels,
cost forming
of all grid systems
material & labour ofcomponent,
required sizethe as cost
per elevation
of all mock drawings.
ups at Thecost
site, aluminum
of all sectionsofshall
samples the be
Providingrustandfree,
fixing 12 mmmitred thick toughened glass for SS Railling of approvedangle brand and manufacture, including SS fittings , necessary
requiredSSincluding
fixtures , making
191.00 smooth,
individual components
necessary holes
straight,for
etc , allaluminumtesting with
complete
and
in anjointed
approved
all
mechanically
rspect aslaboratory,
desired
with
and
aluminum
fielddirection
tests onof the / corner
assembled
Engineer-in-charge
bracketscurtain
working .
inside the frame
wall wherever
with aluminum composite panel cladding, Item191 1639.00 sqm
aluminumand
cleaning cleat angle,
protection of the curtain snap wallon beading for
with aluminum glazing with door
composite sealscladding
panel / wool pile etc.handing
till the all complete.The
over of the quoted rates
building forshall be deemed
occupation. Base toframe
be work
inclusive
Providing of the
and fixing
for ACP cladding cost of all aluminum,
3M™ Scotchal
is payable under the m.s.
electro galvanised
relevant cutaluminum brackets
Dusted /Crystal required
items (The for
acidContractor fixing
-etched look partitions as
shall) 7725SE-314/324 per
provide curtain walldesign /
Graphic detail
with Film and labour
over the
aluminum mentioned
designated
composite panel above
locations andshown
cladding, any
havingin
other
192.00 the
all theincidental
drawing
performance
in any operation
design, to complete
characteristics
colour and the work.
all pattern
complete or,asItems
as per cost
perthe includes of
thedirection
Architectural supplying,
thedrawings, Installation
Engineer-In-Charge.
as per item anddescription,
fixing of aluminum partition
as specified, as per sections with 12mm
the approved shopthick Item192 2656.00 sqm
toughened
drawings and clear glass, hardware,
as directed epdm gaskets, Labours,
by the Engineer-in-Charge. tools,for
However, including
the purpose cost of of sealants,
payment,brackets,
only the anchor
actual areafasteners,
on thes.s. screws,
external masking
face of thetape,
curtain wall
protective
Supply, tape,
installation, backer rods,
testing & bolts and
commissioning galvanised of m.s.
aluminum steel top brackets,
scaffolding scaffolding,
eassy
with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places." to assembleAll taxes
and and duties
dismantlable etc. complete
quick fit typein all respect
mobile as
quick per approved
access platform
drawings and
Aardwolf model direction
no SER of WN
Enginer
234 inmake charge. or as approved equivalent . The system shall be complete in all respect and direction of Engineer in-charge.
Glass - 12mm
System should thick
include toughened
the following clearitems.
glass. All the installed glass panels shall be free from any scrach / defects.
193.00 Telescopic cleaning pole 6m long - 1 no.. Item193 2.00 job
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top &
194.00 bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer- Item194 350.00 sqm
in-charge (Door handle, lock and stopper etc.to be paid separately).
Providing and fixing Assa Abloy YEH-01A /DORMA pull Handle TGDI-H 600back to back with 500mm CTC, adjustable fixing for glass, wood and metal
195.00 doors in satin stainless steel grade 304. The pull handles should have supporting washer with raised bevelling on the outer surface. Length =600mm, Item195 100.00 pair
32mm dia, -SS304 etc .complete as per direction of Engineer-in-Charge.
Providing, supplying and fixing of Frameless Swing Glass Door in glazing using 12mm thick toughened glass as approved make with aluminum rails of 65-
100mm high both at top and bottom as approved comprising of pivot with stainless steel cover including fixing of pivots floor springs, locks, handles
etc. as desired complete with all respects as per detailed drawings, manufacturers specifications and direction of Engineer in charge.
Single Leaf:- Swing Glass Door which includes one no. each of fittings such as EPF-712/PT24 - Top Pivot – 1 nos., EPF-724/ TP/TA - Top rail - 1nos., EPF-
725 - Bottom rail with lock and EPC – 1nos., Yale 'H' Pull Handle YEH-01A (600mm*32mm)/ DORMA TGDIH 600*32mm – 1 set , Floor spring ASSA ABLOY
AF224P/ DORMA BTS 75V with standard spindle conforming to EN 1154, tested for 500,000 cycles, non-handed unit suitable for doors up to 150 kg leaf
weight, with variable spring strength (size EN 2-4) and closing speed adjustment 145° -15° & 15°- 0°, fixed hold open at 90° and SS cover plate – 1set . The
top/bottom rail shall be of 65-100mm height and 28-40mm thick with SS cover on both sides complete. Featuring hydraulically fully controlled closing
196.00 cycle including cement box, Finish : Satin Stainless Steel. The above work complete in all respect as per approved drawings and to the satisfaction of Item196 250.00 sqm
Engineer-in-Charge .
single leaf door
Providing, supplying and fixing of Frameless Swing Glass Door in glazing using 12mm thick toughened glass as approved make with aluminum rails of 65-
100mm high both at top and bottom as approved comprising of pivot with stainless steel cover including fixing of pivots floor springs, locks, handles
etc. as desired complete with all respects as per detailed drawings, manufacturers specifications and direction of Engineer in charge.
Double Leaf:- Swing Glass Door which includes two no. each of fittings such as EPF-712/PT24 - Top Pivot – 2nos, EPF-724/TP/TA - Top door rail -2nos,
EPF-725 - Bottom door rail with lock and EPC 2 sets, Yale 'H' Pull Handle YEH-01A (600mm*32mm)/ DORMA TGDIH 600*32mm – 2 sets, Floor spring ASSA
ABLOY AF224P/DORMA BTS 75V with standard spindle conforming to EN 1154, tested for 500,000 cycles, non-handed unit suitable for doors up to 150 kg
leaf weight, with variable spring strength (size EN 2-4) and closing speed adjustment 145° -15° & 15°- 0°, fixed hold open at 90° and SS cover plate –
2sets. The top/bottom rail shall be of 65-100mm height and 28-40mm thick with SS cover on both sides complete . Featuring hydraulically fully
197.00 controlled closing cycle including cement box, Finish : Satin Stainless Steel. The above work complete in all respect as per approved drawings and to the Item197 250.00 sqm
satisfaction of Engineer-in-Charge .
Double leaf door
Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of
1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled
with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on
horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for
198.00 fixing of fire rated glazed shutter. The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired Item198 246.00 metre
shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded).
Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc
coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including
applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc
complete in all respect as per NBC 2016 , IS 16231 ( part-3) : 2016 and as per direction of Engineer-in-charge.
The glass shall be clear, toughened, interlayered, non-wired fire resistant having 11 mm thickness of approved brand with 120 minutes of fire resistance
both integrity & radiation control (EW120) and minimum 20 min of insulation (EI20) and having a sound reduction of 37dB and LT of 86%. Glass shall be
compliant to class 2(B)2 category of Impact Resistance as per EN 12600. The glass should be manufactured in UL & TUV audited Facility and including UL-
EU Certification.The maximum glazing size cannot be more than 1100 mm x 2200 mm (w x h) or 2.42 sq mts in total area. The test report for the complete
199.00 system (Glazed Door or Partition) will be considered valid only if it contains the stamp Item199 146.00 sqm
and signature of the authorized signatory from the glass manufacturer. (Actual glass size is to be measured at site for payments). .
Providing and fixing non load bearing fixed frame for fire resistant glazed Partition for 120 min Fire Rating, made out to a profile of dimension 60mm x 70
mm of 1.6 mm thick galvanised steel sheet as per test evidence suitable for fixing fire rated glass for 120 min of both integrity & radiation control
(EW120) & minimum 20 min of insulation (EI20).The profile has to be fixed to the supporting construction by means of anchor fasteners of size M10 x 80,
every 150 mm from the edges and every 500 mm (approx) c/c. Linear meaurement of frame shall be measured for payment. The frame shall be filled
200.00 with mineral wool insulation of density min 96kg/ m³. and finished with a approved fire resistant primer or Powder coating of not less than 30 micron in Item200 250.00 metre
desired shade as per NBC 2016 , is 16231 ( part-3) : 2016 and directions of Engineer - in- charge. .
Floor Mounted Trolley Fender : Fabrication, supply & installation of top mounted SS 304 grade floor mounted guard railing of Dorma/Ozone/ Rinox or
Equivalent make 300 mm high as per drawing made of 38 x 1.5 mm thk. SS tube mounted with SS modular laser cut vertical of 54 x 12 mm thk. mounted
on SS base plate of dia. 95 x 6 mm thk. fixed with the help of M8 CSK head anchors as per vendor detail. Vertical are spaced @ 1.5 mtr. regular intervals.
All SS components are in SS 304 grade with satin finish, made by using modern, automatic machines like CNC machine, laser cutting, water jets etc. The
rate shall includes cost & conveyance of materials, base plate screws, bolts, fabrication, any locking arrangements, transportation,cutting & making good
the floor/walls, loading & unloading, handling of machineries all electrical charges etc. labour charges , all leads and lift etc. complete as directed by
201.00 engineer incharge. (Please note that no welding of SS pipes will be allowed and work shall be done by a specialized agency on modular and component Item201 4939.00 Metre
basis).
Wall Mounted Trolley Fender : Fabrication, supply & installation of top mounted SS 304 grade wall mounted guard railing of Dorma/Ozone / Rinox / DLine
or Equivalent make as per drawing made of 38 x 1.5 mm thk. SS tube mounted with SS modular laser cut vertical of 54 x 12 mm thk. mounted on SS base
plate of dia. 95 x 6 mm thk. fixed with the help of M8 CSK head anchors as per vendor detail. Vertical are spaced @ 1.5 mtr. regular intervals. All SS
components are in SS 304 grade with satin finish, made by using modern, automatic machines like CNC machine, laser cutting, water jets etc. The rate
shall includes cost & conveyance of materials, base plate screws, bolts, fabrication, any locking arrangements, transportation,cutting & making good the
floor/walls, loading & unloading, handling of machineries all electrical charges etc. labour charges , all leads and lift etc. complete as directed by engineer
202.00 incharge. (Please note that no welding of SS pipes will be allowed and work shall be done by a specialized agency on modular and component basis). Item202 4939.00 Metre
Providing and fixing broom finish Stainless steel sheet ( 304 grade) Column / wall Cladding,skirting refer drawing made out of 1.2mm thick Stainless steel
sheet of extruded sections, fixing with frame ,screws, rubber beading (for holding screws ) etc. complete with all respect as desired as per drawing and
207.00 manufacturers specifications and direction of Engineer in charge.( payment shall be paid of actual area of cladding.) Item207 267.00 sqm
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement
compound consisting of applying :
a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for
4 hours.
208.00 b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure Item208 4623.00 sqm
for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of
pipes and masonry with polymer mixed slurry :
Providing ,supply & fixing 1.5mm thick self adhesive membrane with cross laminated HDPE, Bituthene CP Grace / Proofex GP Fosroc/ Colphene-3000 on
horizontal surface , Elongation ( ASTM D638 )- minimum 200%,Puncture resistance ( ASTM E154) minimum 200N, of approved make shall be fixed with
leveling surface. The membrane should be designed to be applied in elevated temperatures of 55 deg C and should confirm to BS 8102:2009. Adjacent
sheet shall be laid in similar manner with overlaps as per system requirement. The overlap joint shall be cleaned and sealed as per manufacturer's
specification, sealing corners, pile heads, and drains etc. or as desired side requirement and direction of Engineer in charge.
Note :-
(The all above operation excluding 25mm thcik CC 1:2:4 screed for protection layer before laying reinforement and concrete .) Contractor shall give 10
years guarantee for water proofings.The work shall be executed by authorized / manufacturer approved applicator.
209.00 Note : Material to be supplied with original manufacturer's Data sheet, Lable, MTC and Method statement. The client has right to inspect the Item209 50905.00 sqm
manufacturing facility of the original manufacturer.
Providing ,supply & fixing 1.5mm thick self adhesive membrane with cross laminated HDPE , approved makes Bituthene CP Grace / Proofex GP Fosroc /
Colphene-3000 on vertical surface Thickness 1.5mm, Elongation ( ASTM D638 )- Mininmum 200%,Puncture resistance ( ASTM E154) minimum 200N, of
approved make shall be fixed with leveling surface. The membrane should be designed to be applied in elevated temperatures of 55 deg C and should
confirm to BS 8102:2009.Adjacent sheet shall be laid in similar manner with overlaps as per system requirement. The overlap joint shall be cleaned and
sealed as per manufacturer's specification, sealing corners, pile heads, and drains etc. or as desired side requirement and direction of Engineer in charge.
The Membrane shall be covered upto 300mm height above G.L and stuck the membrane into a groove cut into the concrete surface and seal the groove
with a suitable bitumastic or liquid sealant or mortar.
The laid membrane shall be covered with 25mm thick expended polystrene board @ 24kg/ cum density spot stuck to the membrene before backfilling.
(The rates will also include cost for chipping away any surplus concrete, surface preparation, cleaning, laying protection board etc, complete as directed
by Engineer in charge. )Contractor shall give 10 years guarantee for water proofing’s.The work shall be executed by authorized / manufacturer approved
210.00 applicator. Item210 21592.00 sqm
Note : Material to be supplied with original manufacturer's Data sheet, Lable, MTC and Method statement. The client has right to inspect the
manufacturing facility of the original manufacturer.
Providing and laying waterproofing treatment by chemical injection grout process on walls and floor of water tank using 25mm dia M.S. nozzles inserted
minimum 1/3 thickness of walls, and 1/3 thickness of basement raft & U.G. Sump raft placed and fixed @ 0.7m c/c distance in both directions and @
0.75m c/c along construction joints, consisting of injecting cement slurries of different viscosities under pressure by pump using STP/ Penatron /KS 901
B ,pidicrete AM @ 225gm./50 kg. of cement or approved equivalent make conforming to IS:2645 and as per manufacturer's specifications and sealing of
nozzles after the injection operation with suitable admixture. Job includes providing and applying two coats of cementitious coatings in the ratio of 1:1 (1
parts of cement : 1 part pidicrete MPB) or approved equivalent make as per manufacturer's specifications, and applying 20mm thick cement plaster 1:4
211.00 (1 cement : 4 coarse sand) added with pidiproof LW @ 200 ml./50 kg. or equivalent as approved. The work shall be carried out as per specifications and Item211 2901.00 sqm
direction of Engineer-in-Charge.
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies,
terraces etc consisting of following operations: :
a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by
Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. :
b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed
with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1
cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and
treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound
conforming to IS : 2645 and approved by Engineering-charge.
d) Finishing the surface with 20 mm thick joint less cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound
conforming to IS : 2645 and approved by Engineering-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally
finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be
done in order and as directed and specified by the Engineer-in-Charge :
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
212.00 Note :- Item212 3229.00 sqm
(The incase of any leakage if the injection grouting or any type processes required for stopping of leakage, the same shall be done by the Contractor free
of cost with in appropriate time to avoid further damages .If the contractor fails to rectify the defects well in time, the same will be done by AAI at risk
and cost of the contractor.
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the
basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the
ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal
surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified
in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar
hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried
out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guaranteed for 10 years against any
215.00 leakage. Item215 833.00 sqm
For horizontal surface one coat @1.10 kg per sqm.
Note : All water proofing work ,Contractor shall give 5 years guarantee for water proofings.
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth,
216.00 dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus Item216 55507.00 sqm
earth with lead upto 50 meters.
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of
mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and
compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer in-Charge.
217.00 With material conforming to Grade-I (size range 75 mm to 0.075 mm ) having CBR Value-30 Item217 8757.00 cum
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification
including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base
218.00 course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve gap the desired density, complete as per Item218 11406.13 cum
specifications and directions of Engineer-in-Charge.
Construction of dry lean cement concrete sub base over a prepared subgrade with coarse and fine aggregate conforming to IS:383, the size of coarse
aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement
content not to be less than 150 Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less
than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne
219.00 vibratory roller, finishing and curing etc. complete as per direction of Engineer-in charge. Item219 7597.00 cum
Laying and spreading a layer of sand 6 mm thick (average) over dry rolled lean concrete layer including the cost of sand but including removal of pebbles,
220.00 rubbish etc. by screening if required etc complete, as directed by the Engineer in charge. Item220 304.00 cum
Providing and laying transparent Ist quality polythene sheet separation membrane of 400 microns thick on the base course with overlaps of not less
221.00 than 100mm longitudinally and 150mm transversely as per specification and as directed by Engineer-in-charge. Item221 50644.00 sqm
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse
sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars
with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required
slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/
expansion, construction & longitudinal joints ( 10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint
filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid
separately).
222.00 Note:- i) Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.Cement Item222 11395.00 cum
concrete manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer.
Note:- ii) Prior to start of work the job mix for PQC shall be got designed by the agency from the laboratory approved by AAI and the cost of mix design
shall be borne by the agency and nothing extra is payable on this account.
Providing and laying in position polysulphide sealant of approved make conforming to BS-5212-1990 or IS 11433-1995, in expansion / Construction /
dummy joints including rounding of edges applying 2 coats of approved primer compatible with the brand of polysulphide and preparing the surface and
applying masking tape along the edge of joints to prevent accidental spillage of sealant on top surface and to give neat finish to the sealant and removing
the masking tape after application of sealant etc. complete as per direction of Engineer-in-Charge & particular specifications. [note : for purpose of
payment, quantity (Length X Width X Depth) of sealant only will be measured.]
i) Expansion joints of size 25 mm wide and 10 mm deep over 30mm dia. Closed-cell Polyethylene foam back-up rod, as per manufacturers specifications
and sketch at Appendix-'A'.
ii) Construction joints of size 10 mm wide and 10 mm deep over 12 mm dia Closed-cell Polyethylene foam back-up rod, as per manufacturers
223.00 specifications and sketch at Appendix-'A'. Item223 11051250.00 cucm
iii) Dummy joints of size 10 mm wide and 10 mm deep over 12 mm dia. Closed-cell Polyethylene foam back-up rod, as per manufacturer's specifications
and sketch at Appendix-'A'.
Providing and fixing in position pre-moulded joint filler in expansion joints. per cm depth
224.00 Item224 670250.00 per cm width
per m length
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with
screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and
directions of Engineer-in charge.
225.00 (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately). Item225 9004.00 cum
Painting road surface marking with adequate no. of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on
bituminous surface/ PQC in white / yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete.
226.00 New work (Two or more coats) Item226 7185.00 sqm
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong
vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of
227.00 course sand, filling the joints with fine sand etc. Pavers without edge to be packed with cement mortar in order to hold sand bed all complete as per the Item227 9059.00 sqm
direction of Engineer-in-charge.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature,
jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall
not to more than 5mm), including excavation ,making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of
finished kerb edging shall be measured for payment).
228.00 (Precast C.C. kerb stone shall be approved by Engineer-in-charge). Item228 613.00 cum
Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate
229.00 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including Item229 1917.00 sqm
finishing the top smooth etc. complete and as per direction of Engineer-in-charge.
Providing and laying 70mm thick factory made cement concrete grass grid pavers block of M -30 grade made by block making machine with strong
230.00 vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse Item230 4396.00 sqm
sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level
231.00 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) Item231 1618.00 cum
Free float bearing-155 MT-Supplying, fitting/fixing in position true to line and level POT-PTFE bearing make Sanfield, Mageeba, Metco or approved
consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface
232.00 sliding against stainless steel mating surface, completre assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as Item232 604.00 each
per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete as per
drawing and approved technical specifications.
233.00 Providing and Fixing High tensile steel wires/strands including all accessories for pre-stressing system of make TATA, Freyssinet,Usha martin,VSL ,sanfield Item233 42.00 Ton
or approved , stressing operations and grouting complete as per drawing and MoRTH Technical specifications.HTS in PSC Girders
Providing and laying Bitumen Penetration Macadam with hard stone aggregate of quality, size and grading as specified, with bitumen of suitable
penetration grade, including required key aggregate as specified, spreading coarse aggregate with the help of self propelled/tipper tail mounted
aggregate spreador and applying bitumen by a pressure distributor and then spreading key aggregate with the help of aggregate spreador complete
including consolidation with road roller of 8 to 10 tonne capacity to acheive specified value of compaction and surface accuracy.
234.00 For 50 mm compacted thickness using coarse aggregate of size 50-20mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 Item234 17617.00 sqm
cum per 10 sqm. With paving asphalt grade VG-10 @ 50 kg/10 sqm
Providing and laying bitumen mastic wearing course ( as per specifications) with industrial bitumen of grade 85/25 confirming to IS : 702, prepared by
using mastic cooker and laid to required level and slope, including providing antiskid surface with bitumen precoated fine grained hard stone chippings of
approved size at the rate of 0.005 cum per 10 sqm and at approximate spacing of 10 cm centre to centre in both directions, pressed into surface
235.00 protruding 1 mm to 4 mm over mastic surface, including cleaning the surface, removal of debries etc. all complete. ( Considering bitumen using 10.2% as Item235 17617.00 sqm
per MORTH Specification)
25 mm thick
Providing and applying tack coat using bitumen emulsion confirming to IS : 8887, using emulsion pressure distributer including preparing the surface &
cleaning with mechanical boom.
236.00 With rapid setting bitumen emulsion Item236 4641.00 sqm
on W.B.M. / W.M.M. @ 0.4kg/sqm
Providing and appluing tack coat using bitumen emulsion confirming to IS : 8887, using emulsion pressure distributer including preparing the surface &
cleaning with mechanical boom.
237.00 With rapid setting bitumen emulsion Item237 17617.00 sqm
on bitumen surface @ 0.25kg/Sqm
Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by
tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling
with smooth wheeled vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications
238.00 and directions of Engineer-in-charge. Item238 1.00 cum
50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.5% (percentage by weight of total mix) prepared in Batch type Hot Mix
Plant of 100 to 120 TPH capacity.
Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and
filler, transported the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and
alignment and rolling with smooth wheeled , vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete
239.00 as per specifications and directions of Engineer-in-charge. Item239 1.00 cum
50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @2% ( percentage by
weight of Aggregate)prepared in Batch type Hot Mix Plant of 100 to 120 TPH capacity.
Providing and laying Bituminous concrete using crushed stone aggregates of specified grading premixed with bituminous binder and filler, transporting
the hot mix to site by tippers, laying with power finisher equipped with electronic sensor to the required grade, level and alignment and rolling with
smooth wheeled vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and
240.00 directions of Engineer-in-charge. Item240 1.00 Cum
40/50 mm compacted thickness with bitumen of grade VG-30 @5. 5% (percentage by weight of total mix) and lime filler @3% ( percentage by weight of
Aggregate)prepared in Batch type Hot Mix Plant of 100 to 120 TPH capacity.
Drainage Spouts in Superstructure including providing drip mouldings and also including supplying, fitting and fixing approved type of materials complete
241.00 as per drawing and Technical specification vide clause no. 2705 of MoRT&H’s Specification for Road & Bridge Works. Item241 280.00 each
Providing, fixing, testing and commissioning of UPVC rain water pipes (IS : 4985-1983, 6.00 Kg/cm2 pressure rating) including injection moulded fittings
(heavy duty) (plain or door) e.g. bends, junction, cowls, tees, offsets, access pieces etc. Clamps/Supports jointing with rubber ring/solvent cement joints
242.00 including cutting chase or holes in walls and floors and making good as required at Site. 110mm dia pipe Item242 1680.00 meter
243.00 Clearing grass and removal of the rubbish up to a distance of 50m outside the periphery of the area cleared. Item243 82079.00 Sqm
Trenching in ordinary soil up to a depth of cm including removal and stacking of serviceable materials and then disposing of surplus soil , by spreading
244.00 and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/ and Item244 49247.40 Cum
manure before and after flooding trench with water (excluding cost of imported earth , slude or manure).
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the
excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by
20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine
dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within
245.00 Item245 8256.13 Cum
a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately).
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 part of stacked
volume of earth after reduction by 20% :1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of
rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately)
246.00 Holes 120 cm dia , and 120 cm deep Item246 1931.00 each
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 part of stacked
volume of earth after reduction by 20% :1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of
rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately)
247.00 Holes 60 cm dia , and 60 cm deep Item247 17747.00 each
Supplying and stacking of Good earth at site including royalty and carriage with all lead and lifts, (earth measured in stacks will be reduced by 20% for
248.00 payment). Item248 39163.71 Cum
Supplying and stacking of cow dung manure/cattle manure at site including cost and carriage with all lead and lifts, (manure measured in stacks will be
249.00 reduced by 8% of payment) Item249 5623.93 Cum
Supplying and spreading of fertilizer & pesticides at site of work
250.00 DAP Item250 5426.53 Kg.
254.00 Rough dressing the trenched ground including breaking of clods. Item254 82079.00 per sqm
255.00 Flooding the ground with water including making Kiaries and dismantelling the same Item255 82079.00 per sqm
256.00 Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. Item256 82079.00 per sqm
257.00 Fine dressing the ground Item257 82079.00 per sqm
Grassing with selection no-1, grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds
258.00 and fit for mowing including supplying good earth if needed (the good earth shall be paid for separately) Item258 65843.00 Sqm
With grass Turf
259.00 Removal of garden rubbish including building rubbish, earth with or / and mulba excavated by mechanial transport with all lead and lift. Item259 300.00 per trip
Supplying of selection no-1 in turf form at site of work lush green, free from weeds with good and healthy i/c loading and un loading with all leads and
260.00 lifts. Item260 65843.00 per sqm
Preparation of mounds of various size and shape by available excavated /supplied earth in layers not exceeding 20 cm in depth, breaking clods,watering
261.00 of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. Item261 4378.80 Cum
262.00 Anthecophalus cadamba having height of 10-12ft stright & sturdy branches big poly bag well developed. Item262 50.00 Each
263.00 Azadirachta indica having height of 10-12ft stright & sturdy branches big poly bag well developed. Item263 10.00 Each
264.00 Bombax Malabaricum having height of 10-12ft stright & sturdy branches big poly bag well developed. Item264 10.00 Each
265.00 Bauhinia Blackie having height of 10-12ft stright & sturdy branches big poly bag well developed. Item265 20.00 Each
266.00 Butea frondosa having height of 10-12ft stright & sturdy branches big poly bag well developed. Item266 20.00 Each
267.00 Chukrasia Tabularis having height of 10-12ft stright & sturdy branches big poly bag well developed. Item267 9.00 Each
268.00 Cassia Fistula having height of 10-12ft stright & sturdy branches big poly bag well developed. Item268 250.00 Each
269.00 Chorisia speciosa having height of 10-12ft stright & sturdy branches big poly bag well developed. Item269 25.00 Each
270.00 Callistemon lanceolatus having height of 10-12ft stright & sturdy branches big poly bag well developed. Item270 19.00 Each
271.00 Dalbergia Sissoo having height of 10-12ft stright & sturdy branches big poly bag well developed. Item271 22.00 Each
272.00 Delonix regia having height of 10-12ft stright & sturdy branches big poly bag well developed. Item272 18.00 Each
273.00 Erythrina Indica having height of 10-12ft stright & sturdy branches big poly bag well developed. Item273 21.00 Each
274.00 Ficus Lyrata having height of 4-6 ft stright & sturdy branches big poly bag well developed. Item274 150.00 Each
275.00 Ficus virens having height of 10-12ft stright & sturdy branches big poly bag well developed. Item275 125.00 Each
276.00 Ficus infectoria having height of 10-12ft stright & sturdy branches big poly bag well developed. Item276 110.00 Each
277.00 Jacaranda mimosaefolia having height of 10-12ft stright & sturdy branches big poly bag well developed. Item277 21.00 Each
278.00 Lagerstroemia speciosa having height of 10-12ft stright & sturdy branches big poly bag well developed. Item278 19.00 Each
279.00 Lagerstroemia Floribunda having height of 10-12ft stright & sturdy branches big poly bag well developed. Item279 47.00 Each
280.00 Mangifera Indica having height of 10-12ft stright & sturdy branches big poly bag well developed. Item280 15.00 Each
281.00 Plumeria alba multi branched in height 6-8ft in poly bag well developed. Item281 250.00 Each
282.00 Plumeria Acutifolia multi branched in height 6-8 ft in poly bag well developed. Item282 140.00 Each
283.00 Salvadora oleoides having height of 10-12ft stright & sturdy branches big poly bag well developed. Item283 16.00 Each
284.00 Foxtail (palm) having height of 7-8 ft trunk with 60-70 leves well developed in big container pot bond condition. Item284 15.00 Each
285.00 Fishtail (palm) having height of 6-8 ft trunk with 60-70 leves well developed in big container pot bond condition. Item285 20.00 Each
286.00 Kentia palm having height of 8-10ft trunk with 60-70 leves well developed in big container pot bond condition. Item286 15.00 Each
287.00 Phoenix sylvestrix (date palm) having height of 8-10ft trunk with 60-70 leves well developed in big container pot bond condition. Item287 136.00 Each
288.00 Ptychosperma macarthurii having height of 8-10ft trunk with 60-70 leves well developed in big container pot bond condition. Item288 162.00 Each
289.00 Roystonea Regia having height of 8-10ft trunk with 60-70 leves well developed in big container pot bond condition. Item289 102.00 Each
290.00 Washingtonia filifera (palm) having height of 6-8ft trunk with 60-70 leves well developed in big container pot bond condition. Item290 88.00 Each
291.00 Washingtonia Robusta (palm) having height of 6-8ft trunk with 60-70 leves well developed in big container pot bond condition. Item291 26.00 Each
292.00 Areca palm ht of plants 90-120 cm with 60-70 leaves in in big size polybag well developed. Item292 777.00 Each
293.00 Chamaedorea elegans ht of plants 90-120 cm with 60-70 leaves in in big size polybag well developed. Item293 1365.00 Each
294.00 Cycas circinalis having trunk ht of 100-120 cm disease free fresh leaves in big size polybag well developed. Item294 225.00 Each
295.00 Casuarina topiary multi ball topiary well branched (bushy) of height 150-180 cm in big size polybag well developed. Item295 50.00 Each
296.00 Cycus revoluta having trunk ht of 45-60 cm with 75-90 disease free fresh leaves in big size polybag well developed. Item296 380.00 Each
297.00 Ficus Microcarpa multi ball topiary well branched (bushy) of height 150-180 cm in big size polybag well developed. Item297 50.00 Each
298.00 Melaleuca topiary single ball topiary well branched (bushy) of height 150-180 cm in big size polybag well developed. Item298 50.00 Each
299.00 Nolina ht of plants 90-100 cm in big size polybag well developed. Item299 40.00 Each
300.00 Phoenix roebelenii having trunk of 60-75 cm with 45 leaves in big size gunnybag well developed. Item300 90.00 Each
301.00 Raphis excelsa ht of plants 50-60 cm with 6-8 suckers in big size gunnybag well developed. Item301 775.00 Each
302.00 Buddha belly golden(B bel) ht of plants 150-180 cm in polybag size of 20 cm well developed. Item302 200.00 Each
303.00 Cassia biflora of height 80-90 cm in big size polybag well developed. Item303 577.00 Each
304.00 Calliandra haematocephala of height 80-90 cm in big size polybag well developed. Item304 628.00 Each
305.00 Caesalpinia pulcherrima ht of plants 90-120 cm in big size polybag well developed. Item305 560.00 Each
306.00 Ficus benjamina ht of plants 120-150 cm in big size polybag well developed. Item306 38.00 Each
307.00 Ensete maurelii ht of plants 90-120 cm in big size polybag well developed. Item307 310.00 Each
308.00 Golden bamboo of height 120-150 cm in polybag of size 35 cm.well developed. Item308 250.00 Each
309.00 Hamelia dwarf bushy ht of plants 35-45 cm in big size polybag well developed. Item309 2291.00 Each
310.00 Hibiscus pink tips ht of plants 50-60 cm in big size polybag well developed. Item310 250.00 Each
311.00 Hibiscus lafrance ht of plants 50-60 cm in big size polybag well developed. Item311 250.00 Each
312.00 Hibiscus snowflake ht of plants 50-60 cm in big size polybag well developed. Item312 2555.00 Each
313.00 Ixora ht of plants 90-100 cm in big size polybag well developed. Item313 802.00 Each
314.00 Lagerstroemia Indica ht of plants 90-100 cm in big size polybag well developed. Item314 618.00 Each
315.00 Bamboo multiplex ht of plants120-150 cm in polybag size of 20 cm well developed. Item315 250.00 Each
316.00 Nerium oleander dwarf ht of plants 90-100 cm in big size polybag well developed. Item316 201.00 Each
317.00 Plumbago Capensis of height 30-45 cm ingunnybag well developed. Item317 300.00 Each
318.00 Tecoma capensis of height 30-45 cm ingunnybag well developed. Item318 2230.00 Each
319.00 Tecoma gaudichaudi ht of plants 80-90 cm in big size gunnybag well developed. Item319 583.00 Each
320.00 Tabernaemontana coronaria dwarf ht of plants 50-60 cm bushy in big size gunnybag well developed. Item320 952.00 Each
321.00 Yucca sylvestrix well branched (bushy) of height 50-60 cm in poly bag of 30 cm size gunnybag well developed. Item321 50.00 Each
322.00 Yucca elephantipes well branched (bushy) of height 90-120 cm in poly bag of 30 cm size gunnybag well developed. Item322 50.00 Each
323.00 Alpinia variegata ht of plants 30-45 cm in poly bag. (11 Nos./sqmt) Item323 450.00 sqm
324.00 Dianella well developed of height 20-25 cm in polybag (24 Nos./sqmt) Item324 525.00 sqm
325.00 Dracaena pleomele reflexa ht of plants 30-45 cm in poly bag. (11 Nos./sqmt) Item325 150.00 sqm
326.00 Dracaena variegated tricolour ht of plants 30-45 cm in poly bag . (11 Nos./sqmt) Item326 150.00 sqm
327.00 Ficus longisland well developed of height 30-40 cm in poly bag of size 20 cm. (11 Nos./sqmt) Item327 2500.00 sqm
328.00 Ficus reginald well developed of height 30-40 cm in poly bag of size 20 cm. (11 Nos./sqmt) Item328 448.00 sqm
329.00 Heliconia ht of plants 30-45 cm in polybag (11 Nos./sqmt) Item329 484.00 sqm
330.00 Hamelia Patens well developed of height45-60cm in polybag (11 Nos./sqmt) Item330 1225.00 sqm
331.00 Iresine well developed of height 15-30 cm in poly bag of size 20 cm (24 Nos./sqmt Item331 150.00 sqm
332.00 Clerodendron inerme well developed of height 15- 30 cm in big poly bag (24 Nos./sqmt) Item332 1523.00 sqm
333.00 Lantana Sellowiana of height 30-45 cm in polybag. (11Nos./sqmt) Item333 1218.00 sqm
334.00 Lantana camara of height 30-45 cm in polybag. (11Nos./sqmt) Item334 250.00 sqm
335.00 Ophiopogon well developed of height 15-20 cm in polybag (24 Nos./sqmt) Item335 443.00 sqm
336.00 Philodendron selloum of height 30-45 cm in in polybag (11 Nos./sqmt) Item336 588.00 sqm
337.00 Syngonium white butterfly of height 15-30 cm in polybag. 24 Nos./sqmt) Item337 458.00 sqm
338.00 Spathiphyllum of height 15-30 cm in polybag. (11 Nos./sqmt) Item338 458.00 sqm
339.00 Red Fountain grass well develope of height 15-30 cm in polybag (11 Nos./sqmt) Item339 1071.00 sqm
340.00 Tabernaemontana coronaria "variegata"well developed of height 45-60 cm in polybag (11 Nos./sqmt) Item340 1228.00 sqm
341.00 w hite Fountain grass well develope of height 15-30 cm in polybag (11 Nos./sqmt) Item341 1267.00 sqm
342.00 Wedelia well developed of height 15-20 cm in polybag (24 Nos./sqmt) Item342 248.00 sqm
343.00 Yellow Fountain grass well develope of height 15-30 cm in polybag (11 Nos./sqmt) Item343 1402.00 sqm
Phoenix palm having height of 8-10ft stem hight
344.00 (Artificial plant Basic Cost Rs40000/-) Item344 20.00 nos
Ficus benjamina having height of 7-8 ft
345.00 (Artificial plant Basic Cost Rs 10000/-) Item345 50.00 nos
Supply and laying S.S.Dustbins with swing covers 2' high ,1'6" dia
346.00 (Basic Cost Rs.15000/-) Item346 100.00 nos
347.00 Supply of decorative pots (Yucaabe) 30" high , 30" dia (Basic Cost Rs.5000/-) Item347 100.00 nos
348.00 Supply of decorative pots (Yucaabe) 48" high , 20" dia (Basic Cost Rs.7500/-) Item348 100.00 nos
349.00 Supply of decorative pots (Yucaabe) 1200 dia (Basic Cost Rs.9900/-) Item349 100.00 nos
Providing and laying of Rocks of different sizes ( 20% of total qty in 2400 mm to 3000 mm in length in one side, 30% of total qty in 1200 mm to 1500 mm
and 50% of total qty in 600 mm to 1000 mm one side ) brought from outside and to be set with mechanically or manual means in areas as per drawings
350.00 or instruction of engg in charge. The setting should meet approval of engineer in charge and architect. (Basic Cost Rs.3000/ ton) Item350 62.05 Ton
Plantation of Trees & shrubs plant at site i/c watering and removal of unsaverieable material's as per direction of officer in charge (excluding cost of
351.00 plant & water) Item351 19678.00 Nos
Plantation of Ground Covers plant at site i/c watering and removal of unsaverieable material's as per direction of officer in charge (excluding cost of
352.00 plant & water) Item352 16236.00 Sqm
Complete maintenance of garden with entire garden features in the garden area i.c lawn, trees, shrubs, hedge etc and removal of all weeds, watering
mowing of lawn, pruning of trees/shrubs, clipping of hedge/edge top dressing of in garden area with good earth & manure once/twice in a year ,
application of chemical fertilizer etc as and when required nothing extra shall be paid on this account(excluding the cost of material which shall be
supplied by the department or paid extra) all the above operation done every month during maintenance period are as per direction of officer in charge.
(M/o Period for 12 months)
Cutting of designer hedge/edge removing of cut materials, cleaning, hoeing of hedge/edge bed watering manuring and applying insecticdes and
fungicides etc.
Topiary cutting/shaping of trees removing of cut materials, cleaning.
Complete maintenance of the entire garden feature in the garden area i.e. lawn trees, shrubs, hedge, flower beds, creepers etc. including hoeing, purning
replacement of plants, gap filling , watering , mowing , of lawn, clipping of hedge, removal of garden waste, applying insecticide, pesticide & fertilizer
(wheenever required) top dressing of lawn with good earth and manure and maintanance of other garden related works as directed by officer -in-charge
(Note:- Good earth , manure, fertilizer, insecticide pesticide etc. & All T&P articles & stock materials will be provided by the department.)
353.00 Weeding out of lawn by removal of all weeds and other wild growth with roots by forking including disposal of garden rubbish with all loads and lifts Item353 790116.00 Per sqm/ Per
complete as per direction and satisfaction of officer in charge of the work without top dressing. month
Cutting of Hedge/Edge including removing of cut material along with removal of rubbish for lead upto 50m and lift upto 1.5m as per direction of officer
incharge (Excluding the cost of material which shall be provided by the Department).
Maintenance of Lawn
Complete maintenance of garden with entire garden features in the garden area i.c lawn, trees, shrubs, hedge etc and removal of all weeds, watering
mowing of lawn, pruning of trees/shrubs, clipping of hedge/edge top dressing of in garden area with good earth & manure once/twice in a year ,
application of chemical fertilizer etc as and when required nothing extra shall be paid on this account(excluding the cost of material which shall be
supplied by the department or paid extra) all the above operation done every month during maintenance period are as per direction of officer in charge.
(M/o Period for 12 months)
Cutting of designer hedge/edge removing of cut materials, cleaning, hoeing of hedge/edge bed watering manuring and applying insecticdes and
fungicides etc.
Topiary cutting/shaping of trees removing of cut materials, cleaning.
Complete maintenance of the entire garden feature in the garden area i.e. lawn trees, shrubs, hedge, flower beds, creepers etc. including hoeing, purning
replacement of plants, gap filling , watering , mowing , of lawn, clipping of hedge, removal of garden waste, applying insecticide, pesticide & fertilizer
(wheenever required) top dressing of lawn with good earth and manure and maintanance of other garden related works as directed by officer -in-charge
(Note:- Good earth , manure, fertilizer, insecticide pesticide etc. & All T&P articles & stock materials will be provided by the department.)
Weeding out of lawn by removal of all weeds and other wild growth with roots by forking including disposal of garden rubbish with all loads and lifts
354.00 complete as per direction and satisfaction of officer in charge of the work without top dressing. Item354 23172.00 Each Per Month
Cutting of Hedge/Edge including removing of cut material along with removal of rubbish for lead upto 50m and lift upto 1.5m as per direction of officer
incharge (Excluding the cost of material which shall be provided by the Department).
Maintenance of trees
Trees up to 3 & 4 years
Complete maintenance of garden with entire garden features in the garden area i.c lawn, trees, shrubs, hedge etc and removal of all weeds, watering
mowing of lawn, pruning of trees/shrubs, clipping of hedge/edge top dressing of in garden area with good earth & manure once/twice in a year ,
application of chemical fertilizer etc as and when required nothing extra shall be paid on this account(excluding the cost of material which shall be
supplied by the department or paid extra) all the above operation done every month during maintenance period are as per direction of officer in charge.
(M/o Period for 12 months)
Cutting of designer hedge/edge removing of cut materials, cleaning, hoeing of hedge/edge bed watering manuring and applying insecticdes and
fungicides etc.
Topiary cutting/shaping of trees removing of cut materials, cleaning.
Complete maintenance of the entire garden feature in the garden area i.e. lawn trees, shrubs, hedge, flower beds, creepers etc. including hoeing, purning
replacement of plants, gap filling , watering , mowing , of lawn, clipping of hedge, removal of garden waste, applying insecticide, pesticide & fertilizer
(wheenever required) top dressing of lawn with good earth and manure and maintanance of other garden related works as directed by officer -in-charge
(Note:- Good earth , manure, fertilizer, insecticide pesticide etc. & All T&P articles & stock materials will be provided by the department.)
355.00 Weeding out of lawn by removal of all weeds and other wild growth with roots by forking including disposal of garden rubbish with all loads and lifts Item355 212964.00 Each Per Month
complete as per direction and satisfaction of officer in charge of the work without top dressing.
Cutting of Hedge/Edge including removing of cut material along with removal of rubbish for lead upto 50m and lift upto 1.5m as per direction of officer
incharge (Excluding the cost of material which shall be provided by the Department).
Maintenance of shrubs
Complete maintenance of garden with entire garden features in the garden area i.c lawn, trees, shrubs, hedge etc and removal of all weeds, watering
mowing of lawn, pruning of trees/shrubs, clipping of hedge/edge top dressing of in garden area with good earth & manure once/twice in a year ,
application of chemical fertilizer etc as and when required nothing extra shall be paid on this account(excluding the cost of material which shall be
supplied by the department or paid extra) all the above operation done every month during maintenance period are as per direction of officer in charge.
(M/o Period for 12 months)
Cutting of designer hedge/edge removing of cut materials, cleaning, hoeing of hedge/edge bed watering manuring and applying insecticdes and
fungicides etc.
Topiary cutting/shaping of trees removing of cut materials, cleaning.
Complete maintenance of the entire garden feature in the garden area i.e. lawn trees, shrubs, hedge, flower beds, creepers etc. including hoeing, purning
replacement of plants, gap filling , watering , mowing , of lawn, clipping of hedge, removal of garden waste, applying insecticide, pesticide & fertilizer
(wheenever required) top dressing of lawn with good earth and manure and maintanance of other garden related works as directed by officer -in-charge
(Note:- Good earth , manure, fertilizer, insecticide pesticide etc. & All T&P articles & stock materials will be provided by the department.)
356.00 Weeding out of lawn by removal of all weeds and other wild growth with roots by forking including disposal of garden rubbish with all loads and lifts Item356 194832.00 Per sqm/ Per
complete as per direction and satisfaction of officer in charge of the work without top dressing. month
Cutting of Hedge/Edge including removing of cut material along with removal of rubbish for lead upto 50m and lift upto 1.5m as per direction of officer
incharge (Excluding the cost of material which shall be provided by the Department).
Maintenance of Ground covers
Providing and Fixing Concealed in wall Flushing Cistern with dual flush Actuator Plate (plastic body in approved finish), flush-stop function, noise less float
valve and fast filling action with all component parts of high quality including fixing frame and set complete in all respects as per direction of the
362.00 engineer-in-charge Item362 245.00 Each
Make: (Kohler 77027IN-P-NA + 5413IN-P-CP), (Hindware Concealo), (Jaquar JCS-WHT-2400S)
Providing and Fixing star white vitreous china wash basin for under counter mounting, specially fabricated brackets painted white and connection pipe to
wall with C.P. wall flange and rubber adopter for waste connection complete, including cutting and making good the walls wherever required
363.00 Make: (Jaquar 2215IN-0), (Hindware Zen 10049), (Jaquar CNS-WHT-701) Item363 326.00 Each
Providing and Fixing vitreous china urinal with C.I. hangers, 15mm dia inlet to built in spreaders with inbuilt waste with C.P flange, complete including
cutting and making good the walls and floors wherever required
Make: (Kohler Cat No: 5017IN-ER-0), (Hindware Senso art 60018), Jaquar URS-WHT-132530)
364.00 Item364 127.00 Each
Providing and Fixing electrical/battery operated concealed automatic flushing system for urinals, including front S.S plate 125 x 125mm chrome sensor
with CP brass body, ball valve etc,complete in all respect including cutting and making good the walls wherever required
365.00 Make: (Kohler 8791T-C01-CP), (Hindware 500964), Jaquar SNR-CHR-51097) Item365 127.00 Each
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by
cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement :
2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
366.00 Granite Stone of approved shade Item366 209.00 Sqm
Providing and fixing Janitor sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and
367.00 brackets, cutting and making good the walls wherever required: Item367 24.00 Each
White glazed fire clay Janitor sink of size 600x450x 250mm
Providing and Fixing stainless steel sink double bowl single drain board Size 1740x515 mm with C.I. brackets, 40mm C.P. waste,C.P. brass chain and rubber
plug, CP Brass Waste coupling and C.P. wall flange rubber adapter for waste connection complete including cutting and making good the walls
wherever required.
368.00 Make: (NeelKanth Cat No: NK DBSD 12 G/M), (Jayna DBSD 02(DX) Item368 5.00 Each
Providing and Fixing 15 mm nominal bore CP Brass short body bib cock complete including cutting and making good the walls wherever required.
Make: (Kohler Cat No:16093IN-4-CP), (Hindware Contessa F330041), (Jaquar FLR-CHR-5047N)
369.00 Item369 245.00 Each
Providing and Fixing 15 mm nominal bore CP Brass long body bib cock complete including cutting and making good the walls wherever required
370.00 Make: (Hindware Immacula F110002), (Jaquar CON-CHR-107KN), (CERA F2006152) Item370 168.00 Each
Providing and Fixing CP Towel Rail fixed to PVC cleats with C.P. brass screws including cutting and making good the walls wherever required
371.00 Make: (Kohler K-97495T-CP) , (Jaquar ACN 1111NM), (Cera F5003103) Item371 5.00 Each
Providing and Fixing C.P. brass towel ring "Round" fixed to PVC cleats with C.P. brass screws including cutting and making good the walls wherever
372.00 required Item372 207.00 Each
Make: (Kohler cat no: 5631IN-CP), (Hindware Cat No: Contessa F880007), (Jaquar ACN-CHR-1121BN)
Providing and fixing SS liquid soap dispenser with push lever assembly with soap refill fixed in wall with Screws complete in all respect as per direction of
the engineer-in-charge
373.00 Make: (Kohler Cat No:5487K-CP), (EURONICS ES-09), (Jaquar ACN-CHR-1137N) Item373 324.00 Each
Providing and fixing CP Brass Bottle Trap of approved quality & make and as per the direction of Engineering- charge
374.00 Make: (Kohler Cat No: 7314IN-CP), (Hindware F850015), (Jaquar ALD CHR-769L300X190) Item374 487.00 Each
Providing and fixing C.P. brass angle valve quarter turn of approved quality conforming to IS:8931
375.00 15mm nominal bore Item375 828.00 Each
Make: (Kohler Cat No: 80154IN-4-CP), (Hindware Cat No: F310003), (Jaquar FLR-CHR-5053N)
Providing and fixing Jumbo toilet paper holder including cutting and making good the walls wherever required
376.00 Make: (EURONICS Cat no: EJ01), (Dolphy make) Item376 245.00 Each
Providing and fixing S.S. body tissue paper dispenser complete including cutting and making good the walls wherever required
Make: (Kohler Cat No: 5633IN-CP), (EURONICS EP 01), (UTEC UT-TVB 4000)
377.00 Item377 88.00 Each
Providing and fixing Health faucet with 1 metre long Flexible Tube and CP wall hook with PVC & SS Screws including cutting and making good the wall
378.00 wherever required complete as directed by the Engineer-in-charge Item378 245.00 Each
Make: (Kohler Cat No:12927IN-CP), (Hindware "F160068"), (Jaquar ALD-CHR-577)
Providing and fixing C.P Single lever concealed diverter for bath and shower with Button at Top complete as directed by Engineer-in-charge
Make: (CERA F1014702 F4010103), (Hindware Divertor F850090 & F110042), (Jaquar ALD-CHR-065 & FLR-CHR-5065K)
379.00 Item379 5.00 Each
Providing and Fixing CP Bath spout with wall flange complete as directed by Engineer-in-charge
381.00 Make: (Kohler Cat No: 8160IN-CP), (Hindware Immacula Series F110023), (Jaquar SPJ-CHR-429) Item381 5.00 Each
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
382.00 15 mm nominal bore Item382 10.00 Each
Providing and Fixing CP Grab bar 600 mm long with SS Screws over Rawl plugs complete for Handicapped Toilet as directed by Engineer-in-charge
383.00 Make: (Kohler Cat No: 10701D-CP), (EURONICS EGR 01), (Jaquar AHS-CHR-1507) Item383 30.00 Each
Providing and Fixing CP Hinged Arms (Sliding rail) for Handicapped Toilet with SS Screws over Rawl Plugs complete as per instructions of the engineer-in-
384.00 charge Item384 30.00 Each
Make: (Jaquar SHA-1187N)
Providing and Fixing straight / offset type flexible single body push fit type WC pan connector with inlet ring and integral single mould sealing fins made
of flexible EVA body to be fixed with manufacture supplied grease, including rubber bush / adaptor for use with C.I pipe as supplied with the pan
385.00 connector complete as directed by Engineer-in-charge Item385 245.00 Each
Make: (Geberit make), (Viega make),
Providing and fixing C.P cast brass Double coat hook as approved with C.P. brass screws complete as per instructions of the engineer-in-charge.
386.00 Make: (Kohler 15247IN-CP), (Hindware Contessa F880004), (Jaquar ACN-CHR-1161N) Item386 245.00 Each
Providing and Fixing central hole C.P. brass Sink Mixer including cutting and making good the walls wherever required complete in all respects as per
387.00 direction of the Engineer-in-charge Item387 9.00 Each
Make: (Kohler 37315IN-4-CP), (Hindware Immacula F110020), (Jaquar SOL-CHR-6309)
Providing and fixing automatic sensor faucet for cold water, for wash basin complete in all respect including basin mounted auto tap, with infrared
sensors with solenoid valves for cold water with electronic circuit and necessary accessories including cutting and making good the walls and floors as
388.00 per requirement and as per approved manufacturer’s make or equivalent Item388 326.00 Each
Make: (Kohler Cat No: 18057IN-ND-CP), (Hindware F240001), (Jaquar SNR-CHR-51021)
Providing and Fixing C.P brass Aerosol perfume dispenser, fixed to wooden cleats / Rawl Plug with C.P brass screws, complete including cutting and
389.00 making good the walls wherever required Item389 245.00 Each
Make: (EURONICS EA-03), (UTEC UT-630)
Providing on Fixing 'C' Class heavy duty 150 mm dia Mild Steel pipes conforming to IS-1239 including cutting, welding, nut-bolts, gasket, fitting viz.
bends, tees, reducers, crosses, flanges etc. and fixing the pipes on wall / ceiling / beam / floor with suitable MS clamps / structural supports/PCC block
390.00 and painting two coats of red oxide primer and two coats of synthetic enamel paint of approved shade complete as required and as specified. ( For Item390 150.00 metre
terrace rain water system)
Providing on Fixing 'C' Class heavy duty 200 mm dia Mild Steel pipes conforming to IS-3589 of thickness 6.3 mm including cutting, welding, nut-bolts,
gasket, fitting viz. bends, tees, reducers, crosses, flanges etc. and fixing the pipes on wall / ceiling / beam / floor with suitable MS clamps / structural
supports/PCC block and painting two coats of red oxide primer and two coats of synthetic enamel paint of approved shade complete as required and as
391.00 specified. ( For terrace rain water system) Item391 300.00 metre
Providing on Fixing 'C' Class heavy duty 250 mm dia Mild Steel pipes conforming to IS-3589 of thickness 6.3 mm including cutting, welding, nut-bolts,
gasket, fitting viz. bends, tees, reducers, crosses, flanges etc. and fixing the pipes on wall / ceiling / beam / floor with suitable MS clamps / structural
supports/PCC block and painting two coats of red oxide primer and two coats of synthetic enamel paint of approved shade complete as required and as
392.00 specified. ( For terrace rain water system) Item392 1660.00 metre
Providing on Fixing 'C' Class heavy duty 300 mm dia Mild Steel pipes conforming to IS-3589 of thickness 6.3 mm including cutting, welding, nut-bolts,
gasket, fitting viz. bends, tees, reducers, crosses, flanges etc. and fixing the pipes on wall / ceiling / beam / floor with suitable MS clamps / structural
supports/PCC block and painting two coats of red oxide primer and two coats of synthetic enamel paint of approved shade complete as required and as
393.00 specified. ( For terrace rain water system) Item393 1050.00 metre
394.00 Providing and Fixing 100 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 Item394 7146.00 metre
Providing and fixing 100mm dia. M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement
395.00 concrete blocks 10X10X10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and Item395 1500.00 Each
making good the walls etc.
Providing and fixing 100mm dia Bend of required degree with access door for Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per
396.00 IS:15905 , insertion rubber washer 3mm thick, bolts and nuts complete Item396 245.00 Each
Providing and fixing 100mm dia Plain Bend of required degree for Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
397.00 Item397 245.00 Each
Providing and fixing single equal plain junction of required degree for Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 :
398.00 Item398 744.00 Each
Providing and Fixing double equal plain junction of 100x100x100x100 mm size for Hubless centrifugally cast (spun) iron pipes epoxy coated inside &
399.00 outside IS:15905 Item399 74.00 Each
Providing and fixing 100mm dia door piece, insertion rubber washer 3 mm thick, bolts and nuts Centrifugally cast (spun) iron S&S IS: 3989 complete
400.00 Item400 130.00 Each
401.00 Providing and Fixing 100 mm dia Terminal guard for Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 Item401 125.00 Each
Providing and fixing shielded coupling for Hubless centrifugally
402.00 cast iron pipe 100 mm dia for SS 304 grade coupling with EPDM rubber gasket Item402 3530.00 Each
Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter:
403.00 100mm Item403 1250.00 Each
Providing and Fixing 100 mm inlet and 100 mm outlet for Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 of self
404.00 cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. Item404 503.00 Each
Providing and Fixing G.I. Reducing elbow of 100 x 50 mm in cement concrete 1:2:4 at all levels for floor drains (exlcuding cost of grating) for connection
405.00 to floor traps in sunken portions, complete as per drawings and as per approval of the engineer-in-charge. Item405 152.00 Each
Providing and Fixing 32 mm dia G.I. pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc.
406.00 Item406 619.00 metre
Providing and Fixing 40 mm dia G.I. pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc.
407.00 Item407 217.00 metre
Providing and Fixing 50 mm dia G.I. pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc.
408.00 Item408 206.00 metre
409.00 Painting of 32 mm dia G.I. Pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality. Item409 619.00 metre
410.00 Painting of 40 mm dia G.I. Pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality. Item410 217.00 metre
411.00 Painting of 50 mm dia G.I. Pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality. Item411 206.00 metre
Providing and fixing G.I. Inlet fittings with maximum 3 inlets 32,40 & 50 mm size fabricated from 100 mm dia G.I. pipes and welded G.I. sockets, fixed to
412.00 C.I. Trap with lead caulked joints and set in cement concrete(1:2:4) complete as directed by Engineer-in-charge. Item412 503.00 Each
413.00 Providing and Fixing SS Grating with frame and SS Screws casted heavy 125 mm dia complete as directed by Engineer-in-charge. Item413 655.00 Each
Providing and Fixing 250 mm dia Dome Grating for roof rain water pipe with all required accessories complete as directed by Engineer-in-charge.
414.00 Item414 45.00 Each
Providing and Fixing 300 mm dia Dome Grating for roof rain water pipe with all required accessories complete as directed by Engineer-in-charge.
415.00 Item415 35.00 Each
Providing and fixing 100 mm dia cast brass cleanout plug / floor cleanout with suitable insert keys for opening, male threaded joint with G.I.
416.00 socket caulked to spun soil pipe including cost of joint etc.complete as directed by Engineer-in-charge.. Item416 225.00 Each
Providing and fixing 150 mm dia cast brass cleanout plug / floor cleanout with suitable insert keys for opening, male threaded joint with G.I.
417.00 socket caulked to spun soil pipe including cost of joint etc.complete as directed by Engineer-in-charge.. Item417 22.00 Each
Providing and fixing 150 mm dia cast iron soil, waste and vent pipes as per IS:15905 (Hubless pipes) including all fittings with or without access of any
degree i.e bends, junctions, branches, end caps, reducers, cowls, offsets, access pieces, G.I. holder bats and clamps, stays, etc and jointing with stainless
steel 304 couplings with EPDM rubber gasket, including cutting holes in walls and floors and making good the same wherever required, all structural
418.00 supports as per approved specifications, complete, as per instructions of the Engineer-in-charge. Item418 2260.00 metre
Providing & laying cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 stone aggregate 20mm and down gauge) 75mm in bed and pipe.
419.00 For 150, 100mm, 75mm and 50mm dia pipes under floor including centering & shuttering wherever required. Item419 1222.00 metre
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5
m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each
deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
All Kinds of Soil
420.00 Pipes, cables etc, not exceeding 80 mm dia. Item420 2505.00 metre
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5
m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each
deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
421.00 All Kinds of Soil Item421 5170.00 metre
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
Providing and fixing 25mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc.
422.00 (internal work) Item422 135.00 metre
Exposed on wall
Providing and fixing 32 mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc.
423.00 (internal work) Item423 80.00 metre
Exposed on wall
Providing and fixing 40 mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc.
424.00 (internal work) Item424 310.00 metre
Exposed on wall
Providing and fixing 50 mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc.
425.00 (internal work) Item425 490.00 metre
Exposed on wall
Providing and fixing 65 mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc.
426.00 (internal work) Item426 550.00 metre
Exposed on wall
Providing and fixing 80 mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc.
427.00 (internal work) Item427 190.00 metre
Exposed on wall
Providing and fixing 100 mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc.
428.00 (internal work) Item428 2885.00 metre
Exposed on wall
Providing and fixing 150 mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc.
429.00 (internal work) Item429 1320.00 metre
Exposed on wall
430.00 Providing and fixing 50 mm dia G.I pipes Class "C" complete with G.I fittings including trenching and refilling etc. (External work) Item430 315.00 metre
431.00 Providing and fixing 65 mm dia G.I pipes Class "C" complete with G.I fittings including trenching and refilling etc. (External work) Item431 260.00 metre
432.00 Providing and fixing 80 mm dia G.I pipes Class "C" complete with G.I fittings including trenching and refilling etc. (External work) Item432 50.00 metre
433.00 Providing and fixing 100 mm dia G.I pipes Class "C" complete with G.I fittings including trenching and refilling etc. (External work) Item433 930.00 metre
Providing and fixing 15 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain
& brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement
and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
434.00 Concealed work, including cutting chases and making good the walls etc. Item434 3100.00 metre
Providing and fixing 20 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain
& brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement
and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
435.00 Concealed work, including cutting chases and making good the walls etc. Item435 1870.00 metre
Providing and fixing 25 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain
& brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement
and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
436.00 Concealed work, including cutting chases and making good the walls etc. Item436 790.00 metre
Providing and fixing 32 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain
& brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement
and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
437.00 Concealed work, including cutting chases and making good the walls etc. Item437 600.00 metre
Providing and fixing 40 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain
& brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement
and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
438.00 Concealed work, including cutting chases and making good the walls etc. Item438 1140.00 metre
Providing and fixing 50 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain
& brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement
and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
439.00 Concealed work, including cutting chases and making good the walls etc. Item439 410.00 metre
Providing and fixing 65 mm dia Chlorinated Polyvinyl Chloride (CPVC Schedule 40) pipes, having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent
cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
440.00 Concealed work, including cutting chases and making good the walls etc. Item440 130.00 metre
Providing and fixing 22 mm od Stainless Steel pipes (Grade SS-316) confirming to JIS 3448 standard complete with Press Type fittings with SC-Contur in
accordance with DVGW regulation W534 such as sockets, bends, elbows, tees, reducers, unions, Flanges, clamps/structural steel supports,hangers etc.
441.00 necessary adapters for GI to SS / other metals and for connections to CP fittings, jointing, sundries,cutting holes in walls/floors/slabs & making good, Item441 110.00 metre
complete in all respects.
Providing and fixing 35 mm od Stainless Steel pipes (Grade SS-316) confirming to JIS 3448 standard complete with Press Type fittings with SC-Contur in
accordance with DVGW regulation W534 such as sockets, bends, elbows, tees, reducers, unions, Flanges, clamps/structural steel supports,hangers etc.
442.00 necessary adapters for GI to SS / other metals and for connections to CP fittings, jointing, sundries,cutting holes in walls/floors/slabs & making good, Item442 460.00 metre
complete in all respects.
Providing and fixing 42 mm od Stainless Steel pipes (Grade SS-316) confirming to JIS 3448 standard complete with Press Type fittings with SC-Contur in
accordance with DVGW regulation W534 such as sockets, bends, elbows, tees, reducers, unions, Flanges, clamps/structural steel supports,hangers etc.
443.00 necessary adapters for GI to SS / other metals and for connections to CP fittings, jointing, sundries,cutting holes in walls/floors/slabs & making good, Item443 80.00 metre
complete in all respects.
Providing and fixing 54 mm od Stainless Steel pipes (Grade SS-316) confirming to JIS 3448 standard complete with Press Type fittings with SC-Contur in
accordance with DVGW regulation W534 such as sockets, bends, elbows, tees, reducers, unions, Flanges, clamps/structural steel supports,hangers etc.
444.00 necessary adapters for GI to SS / other metals and for connections to CP fittings, jointing, sundries,cutting holes in walls/floors/slabs & making good, Item444 60.00 metre
complete in all respects.
Providing and fixing 75 mm od Stainless Steel pipes (Grade SS-316) confirming to JIS 3448 standard complete with Press Type fittings with SC-Contur in
accordance with DVGW regulation W534 such as sockets, bends, elbows, tees, reducers, unions, Flanges, clamps/structural steel supports,hangers etc.
445.00 necessary adapters for GI to SS / other metals and for connections to CP fittings, jointing, sundries,cutting holes in walls/floors/slabs & making good, Item445 110.00 metre
complete in all respects.
Providing and fixing 90 mm od Stainless Steel pipes (Grade SS-316) confirming to JIS 3448 standard complete with Press Type fittings with SC-Contur in
accordance with DVGW regulation W534 such as sockets, bends, elbows, tees, reducers, unions, Flanges, clamps/structural steel supports,hangers etc.
446.00 necessary adapters for GI to SS / other metals and for connections to CP fittings, jointing, sundries,cutting holes in walls/floors/slabs & making good, Item446 610.00 metre
complete in all respects.
Providing and laying S & S Centrifugaly Cast (Spun) / Ductile Iron Pipes conforming to IS :8329:
447.00 100 mm dia Ductile Iron Class K-9 pipes Item447 890.00 metre
Providing and laying S & S Centrifugaly Cast (Spun) / Ductile Iron Pipes conforming to IS :8329:
448.00 150 mm dia Ductile Iron Class K-9 pipes Item448 350.00 metre
Providing push-on-joints of 100 mm dia for Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber
449.00 gasket : Item449 296.67 Joint
Providing push-on-joints of 150 mm dia for Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber
450.00 gasket : Item450 116.67 Joint
Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523 :
451.00 Up to 600 mm dia Item451 1.00 Quintal
Providing and fixing 25 mm dia G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work)
452.00 Item452 16.00 Each
Providing and fixing 32 mm dia G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work)
453.00 Item453 11.00 Each
Providing and fixing 40 mm dia G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work)
454.00 Item454 31.00 Each
Providing and fixing 50 mm dia G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work)
455.00 Item455 81.00 Each
Providing and fixing 65 mm dia G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work)
456.00 Item456 79.00 Each
Providing and fixing 80 mm dia G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work)
457.00 Item457 23.00 Each
Providing and fixing 100 mm dia G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work)
458.00 Item458 282.00 Each
Providing and fixing 150 mm dia G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work)
459.00 Item459 120.00 Each
460.00 Painting of 50 mm dia G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality Item460 315.00 metre
461.00 Painting of 65 mm dia G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality Item461 260.00 metre
462.00 Painting of 80 mm dia G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality Item462 50.00 metre
463.00 Painting of 100 mm dia G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality Item463 180.00 metre
Painting 25 mm dia G.I. pipes and fittings with synthetic enamel white paint
464.00 with two coats over a ready mixed priming coat, both of approved quality for new work Item464 110.00 metre
Painting 32 mm dia G.I. pipes and fittings with synthetic enamel white paint
465.00 with two coats over a ready mixed priming coat, both of approved quality for new work Item465 50.00 metre
Painting 40 mm dia G.I. pipes and fittings with synthetic enamel white paint
466.00 with two coats over a ready mixed priming coat, both of approved quality for new work Item466 260.00 metre
Painting 50 mm dia G.I. pipes and fittings with synthetic enamel white paint
467.00 with two coats over a ready mixed priming coat, both of approved quality for new work Item467 450.00 metre
Painting 65 mm dia G.I. pipes and fittings with synthetic enamel white paint
468.00 with two coats over a ready mixed priming coat, both of approved quality for new work Item468 500.00 metre
Painting 80 mm dia G.I. pipes and fittings with synthetic enamel white paint
469.00 with two coats over a ready mixed priming coat, both of approved quality for new work Item469 190.00 metre
Painting 100 mm dia G.I. pipes and fittings with synthetic enamel white paint
470.00 with two coats over a ready mixed priming coat, both of approved quality for new work Item470 2885.00 metre
Painting 150 mm dia G.I. pipes and fittings with synthetic enamel white paint
471.00 with two coats over a ready mixed priming coat, both of approved quality for new work Item471 1320.00 metre
472.00 Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in external work for 32 mm dia pipe Item472 110.00 metre
473.00 Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in external work for 40 mm dia pipe Item473 250.00 metre
474.00 Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in external work for 50 mm dia pipe Item474 895.00 metre
475.00 Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in external work for 65 mm dia pipe Item475 310.00 metre
476.00 Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in external work for 80 mm dia pipe Item476 710.00 metre
477.00 Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in external work for 100 mm dia pipe Item477 2360.00 metre
478.00 Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in external work for 150 mm dia pipe Item478 450.00 metre
Providing and fixing 20 mm dia forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard
479.00 chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 10 kg/cm2 etc. complete in all respect. Item479 8.00 Each
Providing and fixing 25 mm dia forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard
480.00 chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 10 kg/cm2 etc. complete in all respect. Item480 96.00 Each
Providing and fixing 32 mm dia forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard
481.00 chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 10 kg/cm2 etc. complete in all respect. Item481 53.00 Each
Providing and fixing 40 mm dia forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard
482.00 chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 10 kg/cm2 etc. complete in all respect. Item482 42.00 Each
Providing and fixing 50 mm dia forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard
483.00 chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 10 kg/cm2 etc. complete in all respect. Item483 27.00 Each
Providing and fixing 65 mm dia C.I. butterfly valves of approved make , wafer end type class PN 1.6 as per I.S:13095 or with integrally moulded linear of
484.00 nitrile or EPDM, SS Disc and steam lever operated including necessary nuts, bolts, gaskets, flanges etc., complete as directed by Engineer-in-charge. Item484 41.00 Each
Providing and fixing 80 mm dia C.I. butterfly valves of approved make , wafer end type class PN 1.6 as per I.S:13095 or with integrally moulded linear of
485.00 nitrile or EPDM, SS Disc and steam lever operated including necessary nuts, bolts, gaskets, flanges etc., complete as directed by Engineer-in-charge. Item485 4.00 Each
Providing and fixing 100 mm dia C.I. butterfly valves of approved make , wafer end type class PN 1.6 as per I.S:13095 or with integrally moulded linear of
486.00 nitrile or EPDM, SS Disc and steam lever operated including necessary nuts, bolts, gaskets, flanges etc., complete as directed by Engineer-in-charge. Item486 45.00 Each
Providing and fixing 150 mm dia C.I. butterfly valves of approved make , wafer end type class PN 1.6 as per I.S:13095 or with integrally moulded linear of
487.00 nitrile or EPDM, SS Disc and steam lever operated including necessary nuts, bolts, gaskets, flanges etc., complete as directed by Engineer-in-charge. Item487 1.00 Each
Providing & fixing 65 mm dia Non return valve of approved make CI body for PN 1.6 rating, conforming to IS:5312 complete in all respects.
488.00 Vertical Item488 8.00 Each
Providing & fixing 150 mm dia Non return valve of approved make CI body for PN 1.6 rating, conforming to IS:5312 complete in all respects.
489.00 Vertical Item489 2.00 Each
Providing and Fixing 20 mm dia Pressure Reducing station for cold water supply comprising of 2 Nos. of brass ball valves on outlet and bye-pass and ball
valve with inbuilt strainers and a PRV (Diaphram type) unit with out going pressure gauge with flanged or union connection including safety valve. The
complete system is tested to a pressure not less than 15 Kg/Cm2 and suitable to reduce the pressure as per requirement including flanges/unions, nuts,
490.00 bolts and washers complete as required for applications. (Horizontal or vertical as applicable). Item490 9.00 Each
Providing and Fixing 25 mm dia Pressure Reducing station for cold water supply comprising of 2 Nos. of brass ball valves on outlet and bye-pass and ball
valve with inbuilt strainers and a PRV (Diaphram type) unit with out going pressure gauge with flanged or union connection including safety valve. The
complete system is tested to a pressure not less than 15 Kg/Cm2 and suitable to reduce the pressure as per requirement including flanges/unions, nuts,
491.00 bolts and washers complete as required for applications. (Horizontal or vertical as applicable). Item491 9.00 Each
Providing and Fixing 32 mm dia Pressure Reducing station for cold water supply comprising of 2 Nos. of brass ball valves on outlet and bye-pass and ball
valve with inbuilt strainers and a PRV (Diaphram type) unit with out going pressure gauge with flanged or union connection including safety valve. The
complete system is tested to a pressure not less than 15 Kg/Cm2 and suitable to reduce the pressure as per requirement including flanges/unions, nuts,
492.00 bolts and washers complete as required for applications. (Horizontal or vertical as applicable). Item492 10.00 Each
Providing and Fixing 40 mm dia Pressure Reducing station for cold water supply comprising of 2 Nos. of brass ball valves on outlet and bye-pass and ball
valve with inbuilt strainers and a PRV (Diaphram type) unit with out going pressure gauge with flanged or union connection including safety valve. The
complete system is tested to a pressure not less than 15 Kg/Cm2 and suitable to reduce the pressure as per requirement including flanges/unions, nuts,
493.00 bolts and washers complete as required for applications. (Horizontal or vertical as applicable). Item493 24.00 Each
Providing and Fixing 50 mm dia Pressure Reducing station for cold water supply comprising of 2 Nos. of brass ball valves on outlet and bye-pass and ball
valve with inbuilt strainers and a PRV (Diaphram type) unit with out going pressure gauge with flanged or union connection including safety valve. The
complete system is tested to a pressure not less than 15 Kg/Cm2 and suitable to reduce the pressure as per requirement including flanges/unions, nuts,
494.00 bolts and washers complete as required for applications. (Horizontal or vertical as applicable). Item494 11.00 Each
Providing and Fixing 65 mm dia Pressure Reducing station for cold water supply comprising of 2 Nos. of brass ball valves on outlet and bye-pass and ball
valve with inbuilt strainers and a PRV (Diaphram type) unit with out going pressure gauge with flanged or union connection including safety valve. The
complete system is tested to a pressure not less than 15 Kg/Cm2 and suitable to reduce the pressure as per requirement including flanges/unions, nuts,
495.00 bolts and washers complete as required for applications. (Horizontal or vertical as applicable). Item495 2.00 Each
Providing and Laying 25 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access
pieces etc. jointing with solvent cement complete. Rates includes any type of fittings required for the provision of Garden Hydrant point in main ring of
the Hydrant pipe in different location complete in with trenching, refilling and testing of joints complete as per direction of the engineer in charge
496.00 Item496 100.00 metre
Providing and Laying 32 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access
pieces etc. jointing with solvent cement complete. Rates includes any type of fittings required for the provision of Garden Hydrant point in main ring of
the Hydrant pipe in different location complete in with trenching, refilling and testing of joints complete as per direction of the engineer in charge
497.00 Item497 790.00 metre
Providing and Laying 40 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access
pieces etc. jointing with solvent cement complete. Rates includes any type of fittings required for the provision of Garden Hydrant point in main ring of
the Hydrant pipe in different location complete in with trenching, refilling and testing of joints complete as per direction of the engineer in charge
498.00 Item498 110.00 metre
Providing and Laying 50 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access
pieces etc. jointing with solvent cement complete. Rates includes any type of fittings required for the provision of Garden Hydrant point in main ring of
the Hydrant pipe in different location complete in with trenching, refilling and testing of joints complete as per direction of the engineer in charge
499.00 Item499 250.00 metre
Providing and Laying 63 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access
pieces etc. jointing with solvent cement complete. Rates includes any type of fittings required for the provision of Garden Hydrant point in main ring of
the Hydrant pipe in different location complete in with trenching, refilling and testing of joints complete as per direction of the engineer in charge
500.00 Item500 580.00 metre
Providing and Laying 75 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access
pieces etc. jointing with solvent cement complete. Rates includes any type of fittings required for the provision of Garden Hydrant point in main ring of
the Hydrant pipe in different location complete in with trenching, refilling and testing of joints complete as per direction of the engineer in charge
501.00 Item501 50.00 metre
Providing and Laying 90 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access
pieces etc. jointing with solvent cement complete. Rates includes any type of fittings required for the provision of Garden Hydrant point in main ring of
the Hydrant pipe in different location complete in with trenching, refilling and testing of joints complete as per direction of the engineer in charge
502.00 Item502 660.00 metre
Providing and Laying 110 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access
pieces etc. jointing with solvent cement complete. Rates includes any type of fittings required for the provision of Garden Hydrant point in main ring of
the Hydrant pipe in different location complete in with trenching, refilling and testing of joints complete as per direction of the engineer in charge
503.00 Item503 1290.00 metre
Providing and Laying 160 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access
pieces etc. jointing with solvent cement complete. Rates includes any type of fittings required for the provision of Garden Hydrant point in main ring of
the Hydrant pipe in different location complete in with trenching, refilling and testing of joints complete as per direction of the engineer in charge
504.00 Item504 100.00 metre
Constructing masonry chamber 30x30x50 cm with FPS bricks, inside with brick work in cement mortar 1:4 (1 cement : 4 Coarse sand) for stop cock,
with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 mix (1 cement : 5 fine sand and 10 graded stone aggregate 40 mm
505.00 nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement Item505 1.00 Each
complete as per standard design.
With common burnt clay FPS (non modular) bricks of class designation 7.5
Constructing masonry Chamber 30x30x60 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for Garden hydrant, with DI manhole
cover heavy duty size 300x300mm (inside) with hinged cover & lifting arrangement fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone 150mm
506.00 thick aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of Item506 54.00 Each
neat cement complete as per standard design :
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box
100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4
graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate
40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement
507.00 Item507 1.00 Each
complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box
100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate
40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement
508.00 Item508 7.00 Each
complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface
box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate
40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement
509.00 Item509 8.00 Each
complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
Providing and fixing 15 mm dia thermal insulation over hot water pipes in chase having Japanese Red Oxide Primer Coat with 6mm thick Kaiflex, nitrile or
approved equivalent thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber
having density of 60-90 Kg/m3 over pipes of following sizes including all required accessories complete as per Manufacture's specifications and finishing
510.00 complete in all respect as directed by Engineer-in-charge. Item510 20.00 Metre
Providing and fixing 20 mm dia thermal insulation over hot water pipes in chase having Japanese Red Oxide Primer Coat with 6mm thick Kaiflex, nitrile or
approved equivalent thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber
having density of 60-90 Kg/m3 over pipes of following sizes including all required accessories complete as per Manufacture's specifications and finishing
511.00 complete in all respect as directed by Engineer-in-charge. Item511 30.00 Metre
Providing and fixing 25 mm dia thermal insulation over hot water pipes in chase having Japanese Red Oxide Primer Coat with 6mm thick Kaiflex, nitrile or
approved equivalent thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber
having density of 60-90 Kg/m3 over pipes of following sizes including all required accessories complete as per Manufacture's specifications and finishing
512.00 complete in all respect as directed by Engineer-in-charge. Item512 20.00 Metre
Providing and fixing 32 mm dia 750 mm long hot dipped G.I. Puddle flanges for water tanks as per I.S. 1239 (Class C) with 6mm thick M.S. Plate of
513.00 suitable size and welded alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all details in all respects and as per drawing. Item513 2.00 Each
Providing and fixing 40 mm dia 750 mm long hot dipped G.I. Puddle flanges for water tanks as per I.S. 1239 (Class C) with 6mm thick M.S. Plate of
514.00 suitable size and welded alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all details in all respects and as per drawing. Item514 2.00 Each
Providing and fixing 50 mm dia 750 mm long hot dipped G.I. Puddle flanges for water tanks as per I.S. 1239 (Class C) with 6mm thick M.S. Plate of
515.00 suitable size and welded alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all details in all respects and as per drawing. Item515 3.00 Each
Providing and fixing 65 mm dia 750 mm long hot dipped G.I. Puddle flanges for water tanks as per I.S. 1239 (Class C) with 6mm thick M.S. Plate of
516.00 suitable size and welded alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all details in all respects and as per drawing. Item516 5.00 Each
Providing and fixing 80 mm dia 750 mm long hot dipped G.I. Puddle flanges for water tanks as per I.S. 1239 (Class C) with 6mm thick M.S. Plate of
517.00 suitable size and welded alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all details in all respects and as per drawing. Item517 10.00 Each
Providing and fixing 100 mm dia 750 mm long hot dipped G.I. Puddle flanges for water tanks as per I.S. 1239 (Class C) with 6mm thick M.S. Plate of
518.00 suitable size and welded alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all details in all respects and as per drawing. Item518 2.00 Each
Providing and fixing 150 mm dia 750 mm long hot dipped G.I. Puddle flanges for water tanks as per I.S. 1239 (Class C) with 6mm thick M.S. Plate of
519.00 suitable size and welded alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all details in all respects and as per drawing. Item519 2.00 Each
Providing and fixing 50 mm dia C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc
520.00 if required will be paid separately) : Item520 5.00 Each
Providing & fixing 80 mm dia butterfly valve (with motorized actuator) of rating PN 1.6, wafer type, in cast iron body with Ductile Iron disc, EPDM seal, SS
single piece shaft, conforming to IS-13095 of the following sizes complete with cast iron hand level companion flanges, bolts, nuts, washers & inserted
rubber gaskets, as required and as per enclosed specification, with single phase Electrical Actuator, of 15Nm- 400Nm Torque, made of aluminium alloy
521.00 (resistant to heat, acid , alkali, corrosion), and weather proof heavy duty motor, with stabilized start speed to effectively avoid water hammering, with Item521 5.00 Each
waterproofing seal (IP 67) for all housing seals, low noise level, built –in thermal protection complete as per approved type and specifications as per
instructions of the engineer - in - charge.
Providing & fixing 100 mm dia butterfly valve (with motorized actuator) of rating PN 1.6, wafer type, in cast iron body with Ductile Iron disc, EPDM seal,
SS single piece shaft, conforming to IS-13095 of the following sizes complete with cast iron hand level companion flanges, bolts, nuts, washers & inserted
rubber gaskets, as required and as per enclosed specification, with single phase Electrical Actuator, of 15Nm- 400Nm Torque, made of aluminium alloy
522.00 (resistant to heat, acid , alkali, corrosion), and weather proof heavy duty motor, with stabilized start speed to effectively avoid water hammering, with Item522 5.00 Each
waterproofing seal (IP 67) for all housing seals, low noise level, built –in thermal protection complete as per approved type and specifications as per
instructions of the engineer - in - charge.
Providing and fixing 80 mm dia insect-proof coupling to vent pipes of underground tank/overhead tank with threaded or flanged joints, including M.S.
523.00 flanges, nuts, bolts, 3mm thick rubber insertions complete. Item523 5.00 Each
Providing, fixing and testing, double flanged 50 mm dia Water Flow Meter complete with digital display provision & including Pulse generator and
524.00 Remote Totalizer complete in all respect as per manufacturers specification, instructions and approval as per engineer incharge. Item524 1.00 Each
Providing, fixing and testing, double flanged 65 mm dia Water Flow Meter complete with digital display provision & including Pulse generator and Remote
525.00 Totalizer complete in all respect as per manufacturers specification, instructions and approval as per engineer incharge. Item525 8.00 Each
Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto
1.5m, including getting out the excavated soil, and then returning soil as required, in layers not exceeding 20cm in depth including consolidating each
deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50 m.
All Kinds of Soil
526.00 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm Item526 1175.00 Metre
Extra for excavating trenches for pipes, cables, etc. in All Kinds soil exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic
item for depth upto 1.5 metre).
527.00 All Kinds of Soil Item527 1320.00 Metre
Pipes, cables etc., exceeding 80mm dia but not exceeding 300mm dia
Extra for excavating trenches for pipes, cables, etc. in All Kinds soil exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic
item for depth upto 1.5 metre).
528.00 All Kinds of Soil Item528 575.00 Metre
Pipes, cables etc., exceeding 300mm dia but not exceeding 600mm dia
Extra for excavating trenches for pipes, cables, etc. in All Kinds soils exceeding 3 m in depth but not exceeding 4.5 m. (Rate is over corresponding basic
item for depth upto 1.5 metre).
529.00 All Kinds of Soil Item529 525.00 Metre
Pipes, cables etc., exceeding 300mm dia but not exceeding 600mm dia
Providing and laying 200 mm dia non-pressure NP3 class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1
530.00 cement : 2 fine sand) including testing of joints etc. complete. Item530 600.00 metre
Providing and laying 250 mm dia non-pressure NP3 class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1
531.00 cement : 2 fine sand) including testing of joints etc. complete. Item531 200.00 metre
Providing and laying 300 mm dia non-pressure NP3 class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1
532.00 cement : 2 fine sand) including testing of joints etc. complete. Item532 50.00 metre
Providing and laying 400 mm dia non-pressure NP3 class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1
533.00 cement : 2 fine sand) including testing of joints etc. complete. Item533 280.00 metre
Providing and laying 500 mm dia non-pressure NP3 class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1
534.00 cement : 2 fine sand) including testing of joints etc. complete. Item534 270.00 metre
Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) all-round RCC/HDPE. pipes
535.00 including bed concrete as per standard design for 150 mm dia pipe Item535 120.00 metre
Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) all-round RCC/HDPE. pipes
536.00 including bed concrete as per standard design for 200 mm dia pipe Item536 1180.00 metre
Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) all-round RCC/HDPE. pipes
537.00 including bed concrete as per standard design for 250 mm dia pipe Item537 400.00 metre
Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) all-round RCC/HDPE. pipes
538.00 including bed concrete as per standard design for 300 mm dia pipe Item538 280.00 metre
Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) all-round RCC/HDPE. pipes
539.00 including bed concrete as per standard design for 400 mm dia pipe Item539 400.00 metre
Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) all-round RCC/HDPE. pipes
540.00 including bed concrete as per standard design for 450 mm dia pipe Item540 90.00 metre
Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) all-round RCC/HDPE. pipes
541.00 including bed concrete as per standard design for 500 mm dia pipe Item541 405.00 metre
Providing and laying 160 mm ODHigh density Polythene (HDPE Pipes) material grade PE - 80, working pressure rating PN 4 (0.4 maximum permissible
542.00 working pressure) confirming IS - 14333 jointed by Butt welding method including testing of joints etc. complete Item542 120.00 metre
Providing and laying 225 mm ODHigh density Polythene (HDPE Pipes) material grade PE - 80, working pressure rating PN 4 (0.4 maximum permissible
543.00 working pressure) confirming IS - 14333 jointed by Butt welding method including testing of joints etc. complete Item543 1000.00 metre
Providing and laying 250 mm ODHigh density Polythene (HDPE Pipes) material grade PE - 80, working pressure rating PN 4 (0.4 maximum permissible
544.00 working pressure) confirming IS - 14333 jointed by Butt welding method including testing of joints etc. complete Item544 200.00 metre
Providing and laying 350 mm ODHigh density Polythene (HDPE Pipes) material grade PE - 80, working pressure rating PN 4 (0.4 maximum permissible
545.00 working pressure) confirming IS - 14333 jointed by Butt welding method including testing of joints etc. complete Item545 230.00 metre
Providing and laying 400 mm ODHigh density Polythene (HDPE Pipes) material grade PE - 80, working pressure rating PN 4 (0.4 maximum permissible
546.00 working pressure) confirming IS - 14333 jointed by Butt welding method including testing of joints etc. complete Item546 120.00 metre
Providing and laying 450 mm ODHigh density Polythene (HDPE Pipes) material grade PE - 80, working pressure rating PN 4 (0.4 maximum permissible
547.00 working pressure) confirming IS - 14333 jointed by Butt welding method including testing of joints etc. complete Item547 90.00 metre
Providing and laying 500 mm ODHigh density Polythene (HDPE Pipes) material grade PE - 80, working pressure rating PN 4 (0.4 maximum permissible
548.00 working pressure) confirming IS - 14333 jointed by Butt welding method including testing of joints etc. complete Item548 135.00 metre
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of
300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design ::
549.00 150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Item549 40.00 Each
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of
300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design ::
550.00 180 x 150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Item550 5.00 Each
Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) with RCC Top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4
graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix ( 1 cement :4 coarse sand: 8 graded stone aggregate 40 nominal size), inside
plastering 12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand), finished with a floating coat of neat cement and making channels in cement
concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per
standard design .
551.00 'Inside size 90x80 cms and 45cms deep including Ductile Iron cover( D.I.) and frame(Heavy duty) 610x455mm internal dimensions total weight of cover Item551 47.00 Each
and frame to be not less then 38 kg (wt. of cover 23 kg and weight of frame 15 kg)
With common burnt clay FPS(non modular) bricks of class designation 7.5
Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) with RCC Top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4
graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix ( 1 cement :4 coarse sand: 8 graded stone aggregate 40 nominal size), inside
plastering 12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand), finished with a floating coat of neat cement and making channels in cement
concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per
standard design .
552.00 'Inside size 120x90 cm and 90 cm deep including D.I. cover and frame(Heavy duty) 500 mm internal diameter, total weight of cover and frame to be not Item552 12.00 Each
less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :
With common burnt clay FPS(non modular) bricks of class designation 7.5
553.00 Extra depth of manholes Size 90x80cms With FPS Bricks with class designation75 Item553 9.00 metre
554.00 Extra depth of manholes Size 120x90cms With FPS Bricks with class designation75 Item554 9.00 metre
Constructing Brick Masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 Coarse sand),
inside cement plaster 12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete
1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in Cement Concrete 1:2:4 ( 1
Cement : 2 Coarse Sand : 4 Graded Stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design.
External surface shall be finished with 15mm thick cement plaster 1:6 ( 1 cement : 6 Coarse sand) as per side conditions.
0.91m deep with Ductile Iron cover( D.I.) and frame(Heavy duty) and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming
555.00 to I.S:12592, total weight of cover and frame to be not less than 182Kg. fixed in cement concrete 1:2:4 mix (1 Cement: 2 Coarse sand: 4 Graded stone Item555 40.00 Each
aggregate 20mm nominal size) including centering, shuttering all complete.
With common burnt clay FPS(non modular) bricks of class designation 7.5
556.00 Extra depth for circular type Manhole 0.91 internal dia with F.P.S. Bricks class designation 75, depth beyond 0.91 m to 1.67 m Item556 20.00 metre
Constructing Brick Masonry circular manhole 1.22 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 Coarse sand),
cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6
mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in Cement Concrete 1:2:4 ( 1 Cement : 2
Coarse Sand : 4 Graded Stone Aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design. External
surface shall be finished with 15mm thick cement plaster 1:6 ( 1 cement : 6 Coarse sand) as per side conditions.
1.68m deep with Ductile Iron cover( D.I.) and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S:12592, total
557.00 weight of cover and frame to be not less than 182Kg. fixed in cement concrete 1:2:4 mix (1cement: 2 coarse sand: 4 graded stone aggregate 20mm Item557 15.00 Each
nominal size) including centering, shuttering all complete.
558.00 Extra depth for Circular type Manhole 1.22 m internal dia (at Bottom) With F.P.S bricks class designation 75, Depth beyond 1.68 to 2.29 m. Item558 8.00 metre
Constructing Brick Masonry circular manhole 1.52 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 Coarse sand), inside
cement plaster 12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6
mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in Cement Concrete 1:2:4 ( 1 Cement :
2 Coarse Sand : 4 Graded Stone Aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design .External
surface shall be finished with 15mm thick cement plaster 1:6 ( 1 cement : 6 Coarse sand) as per side conditions.
2.30m deep with Ductile Iron cover( D.I.) and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S:12592, total
559.00 weight of cover and frame to be not less than 182Kg. fixed in cement concrete 1:2:4 mix (1cement: 2 coarse sand: 4 graded stone aggregate 20mm Item559 44.00 Each
nominal size) including centering, shuttering all complete.
With common burnt clay FPS(non modular) bricks of class designation 7.5
Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m :
560.00 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Item560 22.00 metre
Providing & fixing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per I.S:10910 on 12 mm dia steel bar conforming to
I.S:1786 having minimum cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 165 mm space
between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length
on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacturer's
561.00 permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15cm cement concrete block 1:3:6 (1 cement: 3 Item561 1050.00 Each
coarse sand: 6 graded stone aggregate 20mm nominal size) complete as per design.
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast
563.00 R.C.C. horizontal grating with frame complete as per standard design : Item563 140.00 Each
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Construction of Grease trap of size 2 m x1 m (Internal) with effective depth of 1 m with Brick Masonry in Cement 1:4 (1 Cement: 4 Coarse sand) over a
bed of 150 mm thick PCC 1:5:10 (1 Cement: 5 Coarse sand: 10 graded stone aggregate 40 mm nominal size) including a baffle wall of Brick work,
covered with RCC slab of 150 mm thickness, of 1:2:4 mix (1 Cement: 2 Coarse sand: 4 graded stone aggregate of 20 mm nominal size) including centering,
565.00 shuttering and reinforcement complete with providing and fixing Foot rests @300 mm C to C with Two 600x600 mm D.I. Manhole Covers with Lifting Item565 2.00 Each
arrangement, including 150 mm dia Inlet & Outlet pipes complete .
566.00 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Item566 1000.00 Kg
Providing and Fixiing medium duty, water tight double sealed Ductile iron 560 mm dia. Circular Manhole cover and frames specially casted for placing
567.00 over the OH Water tanks with lifting and locking arrangements as per approved sample, complete in all respect including fixing in PCC as per site Item567 1000.00 Kg
Requirement .
Providing and fixing M.S. grating and preferably in 600mm long pieces, fabricated with 16x16mm square bars, @ 20mm clear spacing and welded to
angle iron 25x25x5mm and placed firmly on angle iron frame of 30x30x5mm with 25x3mm hold fasts approximately 75mm long welded at intervals of
568.00 500mm including two or more coats of synthetic enamel paint of approved quality and shade over one coats of primer and set in cement mortar 1:3 (1 Item568 5000.00 Kg
cement : 3 coarse sand) complete as per attached details for drain.
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from
different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required
for the job, all complete as per direction of Engineer -in-charge, beyond 90 m & upto 150 metre depth below ground level.
569.00 All types of soil Item569 960.00 Metre
500 mm dia
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming
570.00 to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge For Item570 720.00 Metre
200 mm nominal size dia
Supplying, assembling, lowering and fixing in vertical position in borewell unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS:
571.00 12818, including hire &labour charges, ittings & accessories etc. all complete, for all depths, as per direction of Engineer-in charge. For 200mm nominal Item571 240.00 Metre
size dia
Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per
572.00 actual requirement, all complete as per direction of Engineerin- charge. Item572 120.00 Cum
Development of Tubewell in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content
(beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of
well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples
573.00 & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories Item573 320.00 Hour
etc., all as per requirement and direction of Engineer-in-charge.
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per
574.00 requirement, all complete for borewell of 200 mm dia Item574 8.00 Each
Providing and fixing 200 mm dia M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary
575.00 bolts & nuts of required size complete. Item575 8.00 Each
576.00 Providing and fixing 200 mm dia Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). Item576 8.00 Each
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from
different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required
for the job, all complete as per direction of Engineer -in-charge, beyond 90 m & upto 150 metre depth below ground level.
All types of soil
577.00 Item577 3840.00 Metre
500 mm dia
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming
578.00 to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge For Item578 2880.00 Metre
200 mm nominal size dia
Supplying, assembling, lowering and fixing in vertical position in borewell 200 mm dia unplasticized PVC medium well screen (RMS) pipes with ribs,
579.00 conforming to IS: 12818, including hire &labour charges, ittings & accessories etc. all complete, for all depths, as per direction of Engineer-in charge. Item579 960.00 Metre
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all
580.00 complete as per direction of Engineer-in-charge. Item580 256.00 Cum
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness,
581.00 for all leads & lifts, all complete as per direction of Engineer-incharge. Item581 256.00 Cum
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads &
582.00 lifts, all complete as per direction of Engineer -in-charge. Item582 256.00 Cum
Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per
583.00 actual requirement, all complete as per direction of Engineerin- charge. Item583 320.00 Cum
Providing and fixing factory made precast RCC perforated drain covers,having concrete of strength not less than M-25, of size 1000 x 450x50 mm,
reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm
584.00 c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. Item584 64.00 Each
Development of Rainy well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content
(beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of
well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples
585.00 & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories Item585 1280.00 Hour
etc., all as per requirement and direction of Engineer-in-charge.
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per
586.00 requirement, all complete for borewell of 200 mm dia Item586 32.00 Each
Providing and fixing 200 mm dia M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary
587.00 bolts & nuts of required size complete. Item587 32.00 Each
Providing and fixing 200 mm dia Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).
588.00 Item588 32.00 Each
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
589.00 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size). Item589 68.80 Cum
Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level,
590.00 including the cost of required centering, shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded Item590 150.40 Cum
stone aggregate 20 mm nominal size).
591.00 12 mm cement plaster finished with a floating coat of neat cement : 1:3 (1 cement : 3 fine sand) Item591 4160.00 Sqm
Construction of brick masonry desilting chamber of size 200x100x60cm (effective depth) before rainy well with 75 class designation bricks in cement
mortar 1:4 (1 cement : 4 coarse sand) , foundation concrete 1:4:8 mix (1 cement : 4 coarse sand; 8 graded stone aggregate 40mm nominal size), inside
and outside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement inside and rough
592.00 plaster on outside, including fixing of grating , neatly finished complete in all respects including neccessary excavation, refilling and disposal of surplus Item592 32.00 Each
earth, complete as per attached Sketch.
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with
593.00 cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. Item593 1694.00 sqm
Red Sand Stone
594.00 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. Item594 820.00 metre
595.00 Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre. Item595 874.00 sqm
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. per 50 kg
596.00 Item596 2500.00 cement
Demolishing R.C.C. work manually/ by mechanical means including cutting & stacking of steel bars and disposal of unserviceable material within
597.00 AAI site premises as per direction of Engineer - in- charge. Item597 350.00 cum
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within AAI
598.00 site premises as per direction of Engineer-in-charge. Item598 500.00 cum
In cement mortar
Providing and fixing 6mm thick bevelled edge mirror of superior glass of approved quality and approved make with VHP tap (3M) & 25mm dia stainless
599.00 steel stud and 10mm brush finish stainless steel trims machine cut in required size and shape as approved shade colour etc complete at all levels as per Item599 505.00 sqm
detailed drawings and direction of Engineer in Charge.
Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in
600.00 200G Virgin Polythene Bags fixed to wall with screw, rawl plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Item600 500.00 sqm
Engineer-in-Charge
Providing and fixing counters (Reception ,Wash basin or other similar location) with 12 mm thick antibacterial anti fungal, boiling water resistant heat
resistant, impact resistant, insulative non conductive, stain resistant, scratch resistant, Green Guard certified Acrylic solid surface of approved make (LG
Himac, Dupoint, Neonnex or equivalent as approved) in approved colour and design, confirming to relevant standards, and having minimum Specific
Gravity 1.65 g/cm3, fixed over MS supporting structure with all mechanical fixtures as per manufacturer's specification and guideline, including fascia and
back splash area as per approved drawings and design, including fixing of solid acrylic surface over 12 mm thick (BWP) with suitable Low VOC adhesive,
601.00 moulding of edges, buffing of surface, making of holes for plumbing fixtures, flushing of joints, necessary hardware, silicon sealants, etc. all complete as Item601 306.00 Sqm
per direction of Engineer In charge. The plan and elevation area (horizontal and vertical) excluding wash basin area will be measured for payment.
Extra over above item , for providing oval shaped wash basin of size 550 x 430 x200 mm in vanity counter, made of moulded surface of 12 mm thick
602.00 Acrylic solid of same specification as above, and in approved colour and design, all complete as per drawings, specification and direction of Engineer in Item602 293.00 Each
charge
Providing and fixing Urinal Partition of 12mm thick board both side decorative compact laminate of required colour ,shade and sizes as manufactured
603.00 by Merino or Greenlam or T Line or approved equivalent including all stainless steel accessories/ fittings ( SS-304 grade) like L clamp with ss screws etc Item603 125.00 Each
as desired. all complete as per drawing and direction of Engineer in charge. (size =(450x900)mm
Providing and fixing wall cladding with 12 mm thick antibacterial anti fungal, boiling water resistant heat resistant, impact resistant, insulative non
conductive, stain resistant, scratch resistant, Green Guard certified Acrylic solid surface of approved make (LG Himac, Dupoint, Neonnex or equivalent as
approved) in approved colour and design, confirming to relevant standards, and having minimum Specific Gravity 1.65 g/cm3, fixed with aluminum frame
over wall in true line and level, as per manufacturer's specification , drawings and design, including suitable Low VOC adhesive, buffing of surface,
making of holes for plumbing fixtures, flushing of joints, necessary hardware, silicon sealants, etc. all complete as desired and direction of Engineer In
604.00 charge. Note :-Only surface area of acrylic solid surface panel alongwith its groove shall be measured for payment. Item604 1198.00 Sqm
Extra over and above C & C router design pattern for Acrylic solid surface wall cladding refer drawing with all respect as desired as per manufacturer
605.00 specifications and direction of Engineer in charge.( payment shall be paid of actual area of C & C router design pattern.) Item605 1198.00 sqm
Fabrication, Supply & Installation of SS Bollard as Approved make of Stainless Steel 304 grade Bollard , Height-900mm, Diameter – 114mm,thickness of
bollard -2mm , Base plate dia –210mm, Fixed to floor with Chemical fasteners as per refer drawing LKO-INT-36/37 and manufacturer specifications
606.00 complete with all respect as desired and direction of Engineer in charge. Item606 147.00 each
Providing, making and placing in position Check-in counters made up from 19mm thick block board covered with 1.00mm thick laminate of approved
make/ shade having hard wood base of specified section including fixing of 12mm thick acrylic polymer solid surface of corian (LG Himac, Dupoint,
607.00 Neonnex or equivalent as approved) at the designated location with necessary fixtures ,fittings etc. complete as shown in the drawing and as per the Item607 72.00 each
direction of the Engineer-In-Charge. Refer Drg. No LKO_TD_B_DEC_0100_DW_0005_10
Providing, making and placing in position Ticket Counter made up from 19mm thick block board covered with 1.00mm thick laminate of approved make/
shade having hard wood base of specified section including fixing of 12mm thick acrylic polymer solid surface of corian (LG Himac, Dupoint, Neonnex or
608.00 equivalent as approved) at the designated location with necessary fixtures ,fittings etc. complete as shown in the drawing and as per the direction of the Item608 16.00 each
Engineer-In-Charge .Refer Drg. No LKO_TD_B_DEC_0100_DW_0005_01/11/12
Providing, making and placing in position Immigration counters made up from 19mm thick block board covered with 1.00mm thick laminate of approved
make/ shade having hard wood base of specified section including fixing of 12mm thick acrylic polymer solid surface of corian (LG Himac, Dupoint,
Neonnex or equivalent as approved) at the designated location with necessary fixtures ,fittings etc. complete as shown in the drawing and as per the
609.00 direction of the Engineer-In-Charge .Refer Drg. No LKO_TD_B_DEC_0100_DW_0005_09 Item609 36.00 each
Providing, making and placing in position Custom Counter made up from 19mm thick block board covered with 1.00mm thick laminate of approved
make/ shade having hard wood base of specified section including fixing of 12mm thick acrylic polymer solid surface of corian (LG Himac, Dupoint,
610.00 Neonnex or equivalent as approved) at the designated location with necessary fixtures ,fittings etc. complete as shown in the drawing and as per the Item610 6.00 each
direction of the Engineer-In-Charge .Refer Drg. No LKO_TD_B_DEC_0100_DW_0005_14
Providing, making and placing in position Information Desk made up from 19mm thick block board covered with 1.00mm thick laminate of approved
make/ shade having hard wood base of specified section including fixing of 12mm thick acrylic polymer solid surface of corian (LG Himac, Dupoint,
611.00 Neonnex or equivalent as approved) at the designated location with necessary fixtures ,fittings etc. complete as shown in the drawing and as per the Item611 4.00 each
direction of the Engineer-In-Charge.Refer Drg. No LKO_TD_B_DEC_0100_DW_0005_13
Providing, making and placing in position Inspection Desk made up from 19mm thick block board covered with 1.00mm thick laminate of approved
make/ shade having hard wood base of specified section including fixing of 12mm thick acrylic polymer solid surface of corian (LG Himac, Dupoint,
612.00 Neonnex or equivalent as approved) at the designated location with necessary fixtures ,fittings etc. complete as shown in the drawing and as per the Item612 20.00 each
direction of the Engineer-In-Charge.Refer Drg. No LKO_TD_B_DEC_0100_DW_0005_04
Providing, making and placing in position Writing Desk ( twin sided) made up from 19mm thick block board covered with 1.00mm thick laminate of
approved make/ shade having hard wood base of specified section including fixing of 12mm thick acrylic polymer solid surface of corian (LG Himac,
Dupoint, Neonnex or equivalent as approved) at the designated location with necessary fixtures ,fittings etc. complete as shown in the drawing and as
613.00 per the direction of the Engineer-In-Charge.Refer Drg. No LKO_TD_B_DEC_0100_DW_0005_08 Item613 16.00 each
Providing and fixing in position security check inspection & X-ray Monitoring table of following sizes consisting of 19mm thick Commercial board of BWR
grade covered with 12mm thick corian of approved shade pasted over the CBB with adhesive and all necessary screws etc. complete as shown drawing
614.00 No. MT/ID-32 and as per direction of the Engoneer-in-Charge.Drg. No LKO_TD_B_DEC_0100_DW_0005_05 Item614 30.00 each
Providing, making and placing in position security check & stamping table Pedestal ( gents) made up from 19mm thick block board including fixing of
12mm thick acrylic polymer solid surface of approved shade(LG Himac, Dupoint, Neonnex or equivalent as approved) and 1.0mm thick white Laminate on
the under faces of the Desk at the designated location with rounded edges with necessary fixtures ,fittings etc.complete as shown in the drawing and as
615.00 per the direction of the Engineer-In-Charge.Refer Drg. No LKO_TD_B_DEC_0100_DW_0005_07 Item615 23.00 each
Providing, Fabricating and installation in position of Security check for ladies (Frisking Booth ) comprising frame work of SS Section 50 x 50x 3mm over the
12mm thick M.S base Plate fixed to the floor with the help of the fasteners.The frame work is covered with 12mm thick Toughened Glass screwed to the
SS frame work with the help of 25 dia SS studs,the toughened glass shall have 3 mm thick fasara film Matte crystal ( SH2 MACRX ) patsed internally, the
frisking booth shall be a complete unit in itself with all necessary fittings, fixtures etc.complete as shown in the Drg. MT/ID-30 and as per the direction of
616.00 Item616 13.00 each
the Engineer-In-Charge.Refer Drg. No LKO_TD_B_DEC_0100_DW_0005_06
"Fabrication, supply and installation of Binnacle consisting of M.S Frame work of tubular sections (M.S frame to be paid seprately in relevant item )
covered with 12mm thick ply board of F.R grade all around,6mm thick toughened fritted glass is fixed to the 12mm ply board of FR grade with the help of
( GE WINSEL-20/Dow Corning-786 ).The top of the AC riser shall have 6mm thick solid acrylic surface of approved colour over 12mm thick ply board of FR
grade fixed to the MS frame work as shown in the drawing no.ID-10,Base of the binnacle shall have skirting 300 wide and 1.2 mm thick stainless steel
sheet of extruded sections fixed with screws,rubber beading ( for holding screws ) etc. to the RCC base complete with fabrication to shape as required
with necessary anchors,bolts,clips,counter sunk screws,washers packing,silicone sealant,backer rod etc. as required for installation as per the approved
617.00 shop drawing and instruction of the Engineer-in-Charge. Item617 120.00 each
( Note:- M.S framing to be paid seperately. Jet Diffuser, LCD Display,and Light fixure are not included in scope However, provisions for fixing the same are
to be made.) Refer Drg. No LKO_TD_B_DEC_0100_DW_0000_09
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos
rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced
barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I.barbed wire tied to angle iron, all complete as
per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with
618.00 tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) Item618 500.00 metre
Providing and erecting 2.0 metre high temporary barricading at site as per drawing/ direction of Engineer-in-Charge which includes writing and painting,
arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution
tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one
location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for
damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without
619.00 prior approval of Engineer-in-Charge. Item619 2800.00 metre
(Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall
remain to be the property of the contractor on completion of the work).
Supplying and Laying Drain Boards Soprema , Ovidrain, Fosroc or as approved equivalent with factory prefixed geotextile) consisting of High Density
Polyethylene nodular sheet with height of 7-8mm, with geotextile (pre attached to the nodular sheet from the factory). The drain board should be
confirming to compressive resistance of minimum 180 KN/sqm. Drain Board rolls to be overlapped 100 mm on sides and ends by peeling prefixed
geotextile from the nodular sheet ,fixing the nodular sheet into each other and overlapping the geotextile. The overlapped geotextile and any other open
620.00 ends to be sealed with 50 mm self adhesive tape to prevent soil intrusion into the laid system. Drain boards to be laid over the waterproofing membrane Item620 9658.00 metre
and covered with soil all complete as per direction of Engineer in charge.
Providing and fixing Vitreous China waterless unrinals of size 336.5mm x 495.3mm x 3302mm. Make Zeroflush (Model No 2F 501) or approved
equivalent make . The quoted rate shall include thecost of wall hung fixture i.e. waterless urinal pot, one unit integrated wall hanger, fastning hardware ,
621.00 built in centre draining receptacle to accept the vertical draft , drain insert , mounting template, drain tube , rubber flange gasket and elastomer trap Item621 24.00 each
complete as per manufacturers specification and directions of Engineers-in-charge.
Boring, providing & installation bored cast in situ reinforced concrete piles of grade M-25 of specified diameter and length below pile cap to carry a safe
working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary
casing of appropriate length for setting out and removal of same and the length of pile to be embedded in the pile cap etc by crawler mounted telescopic
boom hydraulic piling Rig all complete, including removal of excavated earth with all it's lifts & leads. ( length of pile for payment shall be measured upto
622.00 bottom of pile cap) Item622 1.00 metre
Note : Truck mounted rotary/TMR/Tube well boring machine shall not be used.
1000 mm dia piles
Boring, providing & installation bored cast in situ reinforced concrete piles of grade M-25 of specified diameter and length below pile cap to carry a safe
working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary
casing of appropriate length for setting out and removal of same and the length of pile to be embedded in the pile cap etc by crawler mounted telescopic
boom hydraulic piling Rig all complete, including removal of excavated earth with all it's lifts & leads. ( length of pile for payment shall be measured upto
623.00 bottom of pile cap) Item623 9856.00 metre
Note : Truck mounted rotary/TMR/Tube well boring machine shall not be used.
1200 mm dia piles
Vertical load testing of Piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method &
preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-
charge.
624.00 Group of two or more piles up to 50 ton safe capacity Item624 9.00 each
Initial Test(Test load 2.5 times the safe capacity)
Vertical load testing of Piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method &
preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-
charge.
625.00 Group of two or more piles up to 50 ton safe capacity Item625 9.00 each
Routine Test (Test load 1.5 times the Safe capacity)
Lateral load testing of Single Pile in accordance with IS Code of Practice IS:2911 (Part IV) for determining safe allowable lateral load on pile:
626.00 Upto 50 tonne capacity pile Item626 9.00 each
Lateral load testing of Single Pile in accordance with IS Code of Practice IS:2911 (Part IV) for determining safe allowable lateral load on pile:
627.00 Above 50 tonne and upto 100 tonne capacity pile Item627 9.00 each
Integrity testing of Pile using low strain/Sonic Integrity test/Sonic Echo Test Method in accordance with IS-14893 including surface preparation of pile top
628.00 by removing soil, mud, dust & chipping lean concrete lumps etc and use of Computerised equipment & high skill trained personnel for conducting the Item628 1.00 each
test and submission of results, all complete as per direction of Engineer-in-charge.
7 Set
652.00 S/F TP MCB isolator: item681
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as
required.
0 0
652.01 40 amps item682 201 Set
652.02 63 amps item683 267 Set
653.00 S/F 'C' series, SP MCB: item684
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing
MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
4572 Set
654.00 S/F 'B' series, SP MCB blanking plate: item685
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
100 Nos.
655.00 Supplying and fixing following rating, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB item686
complete with connections, testing and commissioning etc. as required.
0 0
655.01 40 amps (double pole) item687 8 Nos.
655.02 63 amps (TPN) item688 10 Nos.
656.00 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 item689
mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
0 0
656.01 40 amps (double pole) item690 208 Nos.
656.02 63 amps (double pole) item691 267 Nos.
657.00 All Em. Lighting DB's shall be IP-55/66,UV resistant as per IEC 61439,flame retardent, self extinguishing material for outdoor/harsh environment like item692
resistant to weather influences (humidity, temprature, water sprays)
0 0
657.01 6 way TPN DB (Flame retardant enclosure as per specs. & report) item693
INCOMER
1 No. 40A 4 pole MCB (10 KA)
OUTGOINGS
18nos. 16A / 20A / 25A /32A SP MCB's (10KA) as required
DB as described above
24 Nos.
657.02 8 way TPN DB (Flame retardant enclosure as per specs. & report) item694
INCOMER
1 No. 40A 4 pole MCB (10 KA)
OUTGOINGS
24 nos. 16A / 20A / 25A /32A SP MCB's (10KA) as required
DB as described above
3 Nos.
657.03 12 way TPN DB (Flame retardant enclosure as per specs. & report) item695
INCOMER
1 No. 40A 4 pole MCB (10 KA)
OUTGOINGS
24 nos. 16A / 20A / 25A /32A SP MCB's (10KA) as required
DB as described above
1 Nos.
658.00 All VTPN DB's, shall be pre assembled with vertical bus bars & IP-55/66,UV resistant as per IEC 61439 ,suitable for outdoor/harsh environment like item696
resistant to weather influences (humidity, temprature, water sprays), chemical resistance etc.
0 0
658.01 12 way VTPN DB item697
INCOMER
1 No. 100A 4 pole MCCB (16 KA) with earth fault protection
OUTGOINGS
36 nos. modules 25A /32A/63A SP/TP MCB's (10KA) as required
DB as described above
2 Nos.
658.02 12 way VTPN DB item698
INCOMER
1 No. 125A 4 pole MCCB (16 KA) with earth fault protection
OUTGOINGS
36 nos. modules 25A /32A/63A SP/TP MCB's (10KA) as required
DB as described above
1 Nos.
659.00 Providing and fixing 40/63 Amps DP contactors for switching operation of lighting circuit through BMS including providing and fixing sheet steel enclosure item699
and interconnecting with Daylight/lux sensor earthing etc. as required.
90 Set
LIGHTING FIXTURES & ACCESSORIES 0.00 0
B INTERNAL LIGHTING FIXTURES SUPPLY & INSTALLATION 0 0.00
660.00 Supply, Installation, testing and commissioning of Recess LED 600x600mm fitting made of zinc-coated steel, fixture should have minimum efficacy at item700
System level (Not Chip Level) >=120lumens/watt, 3000lm, Life of fixture 50000hrs@L70B50 Lumen maintenance, CCT up to 4000, CRI >80, PF >0.95,
UGR<16 and an operating Voltage Range of 140 - 270 V. Minimum Internal Surge Protection 2.5KV. The fixture should comply with the parameters as per
IS10322 and IEC60598, EMC / EMI compliance, Maximum Wattages 24W, Minimum system Lumens 3000. Philips Models RC600B LED30S840 PSU
W60L60 /Trilux Model Troffer X Panel-NW ET01 / Bajaj WAFFEL LED WITH 3000Lm (4000k) or equivalent model from the approved list of makes.
1198 Nos.
661.00 Supply, Installation, testing and commissioning of Recess LED 600x600mm fitting made of zinc-coated steel , fixture should have minimum efficacy at item701
System level (Not Chip Level) >=120lumens/watt, 4000lm, Life of fixture 50000hrs@L70B50 Lumen maintenance, CCT up to 4000, CRI >80, PF >0.95,
UGR<16 and an operating Voltage Range of 140 - 270 Internal Surge Protection 2.5KV. The fixture should comply with the parameters as per IS10322 and
IEC60598, EMC / EMI compliance, Maximum Wattages 32W, Minimum system Lumens 3000. Philips Models RC600B LED40S840 PSU W60L60 / Trilux
Model Troffer X Panel -NW ET01 / Bajaj WAFFEL LED WITH 4000Lm (4000K) or equivalent model from the approved list of makes.
229 Nos.
662.00 Supply, Installation, testing and commissioning of Recess LED 600x600mm fitting made of zinc-coated steel with Smart Pyramid Optics (SPO), fixture item702
should have minimum efficacy at System level (Not Chip Level) >=120lumens/watt, 4000lm, Life of fixture 50000hrs@L70B50 Lumen maintenance, CCT
up to 4000, CRI >80, PF >0.95, UGR<16 and an operating Voltage Range of 140 - 270 Internal Surge Protection 2.5KV. The fixture should comply with the
parameters as per IS10322 and IEC60598, EMC / EMI compliance, Maximum Wattages 32W, Minimum system Lumens 3000. Philips Models RC600B
LED40S840 PSD W60L60 / Trilux Model Troffer X Panel -NW ETDD 01 / Bajaj WAFFEL LED WITH 4000Lm (4000K) DALI or equivalent model from the
approved list of makes. (Dali Dimmable)
100 Nos.
663.00 Supply, Installation, testing and commissioning of LED Recessed Downlighter with a nominal system lumen output of 2200 lumens and a minimum system item703
efficacy of 110 lm/W. The luminaire should have a color temperature of 4000K and CRI>80. The luminaire shall meet IP20 rating with THD<10% and PF >
0.95. The luminaire housing should made of die-cast aluminum with a aluminium coated plastic diffuser. The luminaire should have high gloss mirror
optics. The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance, maximum wattage 19W (including
driver).Similar to Philips Make DN470B C LED20S/840 PSU / Trilux Orion LED ET / Bajaj DOVEE LED PRO 2000Lm (4000k) or equivalent model from the
approved list of makes.
1378 Nos.
664.00 Supply, Installation, testing and commissioning of LED Recessed Downlighter with a nominal system lumen output of 2200 lumens and a minimum system item704
efficacy of 110 lm/W. The luminaire should have a color temperature of 4000K and CRI>80. The luminaire shall meet IP20 rating with THD<10% and PF >
0.95. The luminaire housing should made of die-cast aluminum with a aluminium coated plastic diffuser. The luminaire should have high gloss mirror
optics. The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance, maximum wattage 19W (including
driver).Similar to Philips Make DN470B C LED20S/840 PSD / Trilux Orion LED ETDD / DOVEE LED PRO 2000Lm (4000k) DALI or equivalent model from the
approved list of makes.(Dali Dimmable)
740 Nos.
665.00 Supply, Installation, testing and commissioning of LED Recessed Downlighter with a nominal system lumen output of 4200 lumens and a minimum item705
system efficacy of 120 lm/W. The luminaire should have a color temperature of 4000K and CRI>80. The luminaire shall meet IP20 rating with THD<10%
and PF > 0.95. The luminaire housing should made of die-cast aluminum with a Polycarbonate aluminum coated reflector. The luminaire should have high
gloss mirror optics. The luminaire should have the provision for DALI dimmability. The fixture should comply with the parameters as per IS10322 and
IEC60598, EMC / EMI compliance, maximum wattage 36W (including driver).Similar to Philips Make DN570B LED40S/840 PSED-E C WH / Trilux Orion LED
ETDD / Bajaj DRONE LED 4200Lm (4000k) DALI or equivalent model from the approved list of makes (DaliDimmable).
564 Nos.
666.00 Supply, Installation, testing and commissioning of LED Recessed Downlighter with a nominal system lumen output of 2400 lumens and a minimum system item706
efficacy of 120 lm/W. The luminaire should have a color temperature of 4000K and CRI>80. The luminaire shall meet IP20 rating with THD<10% and PF >
0.95. The luminaire housing should made of die-cast aluminum with a Polycarbonate aluminum coated reflector. The luminaire should have high gloss
mirror optics. The luminaire should have the provision for DALI dimmability. The fixture should comply with the parameters as per IS10322 and IEC60598,
EMC / EMI compliance, maximum wattage 24W (including driver).Similar to Philips Make DN570 LED24S/840 PSEU-E C WH / Trilux Orion LED ET / Bajaj
DRONE LED 2400 Lm (4000K) or equivalent model from the approved list of makes.
236 Nos.
667.00 Supply, Installation, testing and commissioning of LED Recessed Downlighter with a nominal system lumen output of 2400 lumens and a minimum system item707
efficacy of 120 lm/W. The luminaire should have a color temperature of 4000K and CRI>80. The luminaire shall meet IP20 rating with THD<10% and PF >
0.95. The luminaire housing should made of die-cast aluminum with a Polycarbonate aluminum coated reflector. The luminaire should have high gloss
mirror optics. The luminaire should have the provision for DALI dimmability. The fixture should comply with the parameters as per IS10322 and IEC60598,
EMC / EMI compliance, maximum wattage 24W (including driver).Similar to Philips Make DN570 LED24S/840 PSED-E C WH / Trilux Orion LED ETDD or
equivalent model from the approved list of makes. (Dali Dimmable)
480 Nos.
668.00 Supply, Installation, testing and commissioning of LED Recessed Downlighter with a nominal system lumen output of 1200 lumens and a minimum system item708
efficacy of 110 lm/W. The luminaire should have a color temperature of 4000K and CRI>80. The luminaire shall meet IP20 rating with THD<10% and PF >
0.95. The luminaire housing should made of die-cast aluminum with a aluminium coated plastic diffuser. The luminaire should have high gloss mirror
optics. The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance, maximum wattage 11W (including
driver).Similar to Philips Make DN460B C LED11S/840 PSU / Trilux Ambiella Plus IND G3 LED 1000-840 ET / Bajaj DOVEE LED PRO (4000k) or equivalent
model from the approved list of makes.
1031 Nos.
669.00 Supply, Installation, testing and commissioning of LED Recessed Downlighter with a nominal system lumen output of 800 lumens and a minimum system item709
efficacy of 110 lm/W. The luminaire should have a color temperature of 4000K and CRI>80. The luminaire shall meet IP20 rating with THD<10% and PF >
0.95. The luminaire housing should made of pressure die-cast aluminum with a high efficiency diffuser. The fixture should comply with the parameters as
per IS10322 and IEC60598, EMC / EMI compliance, maximum wattage 7W (including driver).Similar to Philips Make Green perform series / Trilux
Ambiella IND G3 LED 640-840 ET / Bajaj DOVEE LED PRO 800Lm (4000k) or equivalent model from the approved list of makes.
240 Nos.
670.00 Supply, Installation, testing and commissioning of of LED 4ft Batten with a nominal system lumen output of 4000 lumens and a minimum system efficacy item710
of 100 lm/W. The luminaire shall have a rated system lifetime of 40,000 burning hours at L70. The luminaire should have a color temperature of 6500K
and CRI>80. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The luminaire housing should made of CRCA with a PC glossy diffuser.
The total power consumption should not exceed 38W (including driver). Similar to Philips Make ENDURALED BATTEN "BN 108C LED 40S PSU CDL WH" /
Trilux TRL OTA 3600 - 860 ET IP 20 / Bajaj BCLAB LED 4200Lm (6500k) or equivalent model from the approved list of makes.
2491 Nos.
671.00 Supply, Installation, testing and commissioning of of LED 4ft Batten with a nominal system lumen output of 2000 lumens and a minimum system efficacy item711
of 100 lm/W. The luminaire shall have a rated system lifetime of 40,000 burning hours at L70. The luminaire should have a color temperature of 6500K
and CRI>80. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The luminaire housing should made of CRCA with a PC glossy diffuser.
The total power consumption should not exceed 19W (including driver). Similar to Philips Make ENDURALED BATTEN "BN 108C LED 20S PSU CDL WH" /
Trilux TRL OTA 1800 - 860 ET IP 20 or equivalent model from the approved list of makes.
714 Nos.
672.00 Supply, Installation, testing and commissioning of High Pressure Die Cast Aluminium Alloy housing LED High Bay Luminaire of 75watt 9000 system lumen item712
specially designed heat sinks dust free. System wattage Max 75watt. for high ceiling heights having beam Angle 60 deg / 110Degree,PMMA material
Penuts Lenses for effective light distribution, Luminous flux (Lumen)9000.Corelated Color Temp 4000k,CRI>80,Maintenance of lumen L70 (Hrs)
50K@L70,Ambient temperature (Ta) 45Degree,optics narrow or widebeam optics, optical cover glass. Aluminium PDC Housing. Protection of Fixture:-
IP65,IK08,Class I, power factor >0.95, Surge protection 4KV,Votage range 120-277V AC, Lumen standard /Test certificate as per IEC 60598 and IS10322. LM
79 and LM80 reports need to be submitted from a NABL/UL Approved Laboratory. The luminaire should be DALI Dimmable. Driver should be as per BIS
approved. Spare driver should be easily replaceable at the site. Similar to Philips Maxoled BY415 LED90S FG PSD / Trilux LBL 10400 ETDD 120D / OSRAM
ROBLITZ HB SE S B840 WB VS1 or equivalent model from the approved list of makes. The fixtures shall be supplied with the painting and coating similar
to the baffles/ceiling pattern required at site. (Fixtures shall also be supplied with junction box suitable for looping loop out of 3x4 sq. mm power cable
and 2x1.5 sq.mm wire for dimming automation controls.)
928 Nos.
673.00 Supply, Installation, testing and commissioning of High Pressure Die Cast Aluminium Alloy housing LED High Bay Luminaire of 128watt 16500 system item713
lumen specially designed heat sinks dust free. System wattage Max 128watt. for high ceiling heights having beam Angle 60 deg / 110Degree,PMMA
material Penuts Lenses for effective light distribution, Luminous flux (Lumen)16500.Corelated Color Temp 4000k,CRI>80,Maintenance of lumen L70 (Hrs)
50K@L70,Ambient temperature (Ta) 45Degree,optics narrow or widebeam optics, optical cover glass. Aluminium PDC Housing. Protection of Fixture:-
IP65,IK08,Class I, power factor >0.95, Surge protection 4KV,Votage range 120-277V AC, Lumen standard /Test certificate as per IEC 60598 and IS10322. LM
79 and LM80 reports needs to be submitted from a NABL/UL Approved Laboratory. The luminaire should be DALI Dimmable. Driver should be as per BIS
approved. Spare driver should be easily replaceable at the site. Similar to Philips Maxoled BY415 LED160S FG PSD / Trilux LBL 15600 ETDD 120D / OSRAM
ROBLITZ HB SE L B840 WB VS1 or equivalent model from the approved list of makes. The fixtures shall be supplied with the painting and coating similar to
the baffles/ceiling pattern required at site. (Fixtures shall also be supplied with junction box suitable for looping loop out of 3x4 sq. mm power cable and
2x1.5 sq.mm wire for dimming automation controls.)
788 Nos.
674.00 Supply, Installation, testing and commissioning of Surface Mounted Linear LED 60 mm wide fitting with housing made of Extruded Aluminum and item714
anodized finish. The diffuser should be Extruded Polycarbonate and the heat sink should be made of CRCA. The luminaire should have options for
standalone (8ft) unit lengths and should also have provision for continuous mounting. LED Used shall be SMD type and fixture should have minimum
efficacy at System level (Not Chip Level) >=110lumens/watt, Life of fixture 50000hrs@L70B50 Lumen maintenance, CCT choice available in 4000K and
6500K, CRI >80, SDCM<5, PF >0.95, THD<10%, an operating Voltage Range of 140 - 270 V, 50Hz, and should have class B serviceability . Minimum Internal
Surge Protection 2.5KV. The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance, Maximum Wattages 38W,
Minimum system Lumens 4400 for a 8ft luminaire. Philips Model Pure line Slim SP780 X LED44S-4000 PSU W6L224 OD SI / Trilux LCL H 2400 OTA 75 LED
4000-840 ET / Bajaj BPTXn LED 8F 4400Lm (4000 & 6500k) or equivalent model from the approved list of makes.
1029 Nos.
675.00 Supply, Installation, testing and commissioning of Surface Mounted Linear LED 60 mm wide fitting with housing made of Extruded Aluminum and item715
anodized finish. The diffuser should be Extruded Polycarbonate and the heat sink should be made of CRCA. The luminaire should have options for
standalone (8ft) unit lengths and should also have provision for continuous mounting. LED Used shall be SMD type and fixture should have minimum
efficacy at System level (Not Chip Level) >=110lumens/watt, Life of fixture 50000hrs@L70B50 Lumen maintenance, CCT choice available in 4000K and
6500K, CRI >80, SDCM<5, PF >0.95, THD<10%, an operating Voltage Range of 140 - 270 V, 50Hz, and should have class B serviceability . Minimum Internal
Surge Protection 2.5KV. The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance, Maximum Wattages 38W,
Minimum system Lumens 4400 for a 8ft luminaire. Philips Model Pure line Slim SP780 X LED44S-4000 PSU W6L224 OD SI / Trilux LCL H 2400 OTA 75 LED
4000-840 ET / Bajaj BPTXn LED 8F 4400Lm (4000 & 6500k) IP65 or equivalent model from the approved list of makes. The fixture shall be contained in the
IP-65 rated enclosure as per standards.
560 Nos.
676.00 Supply, Installation, testing and commissioning of Surface Mounted Linear LED 60 mm wide fitting with housing made of Extruded Aluminum and item716
anodized finish. The diffuser should be Extruded Polycarbonate and the heat sink should be made of CRCA. The luminaire should have options for
standalone (4ft) unit lengths and should also have provision for continuous mounting. LED Used shall be SMD type and fixture should have minimum
efficacy at System level (Not Chip Level) >=110lumens/watt, Life of fixture 50000hrs@L70B50 Lumen maintenance, CCT choice available in 4000K and
6500K, CRI >80, SDCM<5, PF >0.95, THD<10%, an operating Voltage Range of 140 - 270 V, 50Hz, and should have class B serviceability . Minimum Internal
Surge Protection 2.5KV. The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance, Maximum Wattages 19W,
Minimum system Lumens 2200 for a 4ft luminaire. Philips Model Pure line Slim SP780 X LED22S-4000 PSU W6L112 OD SI / Trilux LCL H 1200 OTA 75 LED
2000-840 ET / Bajaj BPTXn LED 4F NW 2000Lm (4000 & 6500k) or equivalent model from the approved list of makes.
150 Nos.
677.00 Supply, Installation, testing and commissioning of Surface Mounted Linear LED 60 mm wide fitting with housing made of Extruded Aluminum and item717
anodized finish. The diffuser should be Extruded Polycarbonate and the heat sink should be made of CRCA. The luminaire should have options for
standalone (4ft) unit lengths and should also have provision for continuous mounting. LED Used shall be SMD type and fixture should have minimum
efficacy at System level (Not Chip Level) >=110lumens/watt, Life of fixture 50000hrs@L70B50 Lumen maintenance, CCT choice available in 4000K and
6500K, CRI >80, SDCM<5, PF >0.95, THD<10%, an operating Voltage Range of 140 - 270 V, 50Hz, and should have class B serviceability . Minimum Internal
Surge Protection 2.5KV. The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance, Maximum Wattages 19W,
Minimum system Lumens 2200 for a 4ft luminaire. Philips Model Pure line Slim SP780 X LED22S-4000 PSU W6L112 OD SI / Trilux LCL H 1200 OTA 75 LED
2000-840 ET / Bajaj BPTXn LED 4F NW 2000Lm (4000 & 6500k) IP65 or equivalent model from the approved list of makes. The fixture shall be contained
in the IP-65 rated enclosure as per standards.
12 Nos.
678.00 Supply, Installation, testing and commissioning of Surface Mounted Linear LED 60 mm wide fitting with housing made of Extruded Aluminum and item718
anodized finish. The diffuser should be Extruded Polycarbonate and the heat sink should be made of CRCA. The luminaire should have options for
standalone (8ft) unit lengths and should also have provision for continuous mounting. LED Used shall be SMD type and fixture should have minimum
efficacy at System level (Not Chip Level) >=110lumens/watt, Life of fixture 50000hrs@L70B50 Lumen maintenance, CCT choice available in 4000K and
6500K, CRI >80, SDCM<5, PF >0.95, THD<10%, an operating Voltage Range of 140 - 270 V, 50Hz, and should have class B serviceability . Minimum Internal
Surge Protection 2.5KV. The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance, Maximum Wattages 46W,
Minimum system Lumens 5200 for a 8ft luminaire. Philips Model Pure line Slim SP780 X LED52S-4000 PSD W6L224 OD SI / Trilux LCL H 2400 OTA 75 LED
5200-840 ETDD 01 / Bajaj BPTX LED8F 5200Lm (4000 & 6500k) DALI or equivalent model from the approved list of makes. (Dali dimmable)
1043 Nos.
679.00 Supply, Installation, testing and commissioning of Surface Mounted Linear LED 60 mm wide fitting with housing made of Extruded Aluminum and item719
anodized finish. The diffuser should be Extruded Polycarbonate and the heat sink should be made of CRCA. The luminaire should have options for
standalone (4ft) unit lengths and should also have provision for continuous mounting. LED Used shall be SMD type and fixture should have minimum
efficacy at System level (Not Chip Level) >=110lumens/watt, Life of fixture 50000hrs@L70B50 Lumen maintenance, CCT choice available in 4000K and
6500K, CRI >80, SDCM<5, PF >0.95, THD<10%, an operating Voltage Range of 140 - 270 V, 50Hz, and should have class B serviceability . Minimum Internal
Surge Protection 2.5KV. The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance, Maximum Wattages 23W,
Minimum system Lumens 2600 for a 4ft luminaire. Philips Model Pure line Slim SP780 X LED26S-4000 PSD W6L112 OD SI / Trilux LCL H 1200 OTA 75 LED
2600-840 ETDD 01 / BPTXn LED 4F NW 2000Lm (4000 & 6500k) DALI or equivalent model from the approved list of makes. (Dali dimmable)
50 Nos.
680.00 Supply, Installation, testing and commissioning of Linear profiles for cove lighting with Low profile housing height of 21 mm (.86 in), including mounting item720
clips. The housing should be of Extruded polycarbonate, white finish. The lens should be of clear polycarbonate. The luminaire should have options for
standalone (1ft/4ft) unit lengths and should also have provision for continuous mounting with 110 degrees beam angle. LED Used shall be SMD type and
fixture should have minimum efficacy at System level (Not Chip Level) >=100lumens/watt, Life of fixture 50000hrs@L70B50 Lumen maintenance, CCT
choice available in 4000K and 3000K, CRI >80, SDCM<3, PF >0.9, THD<10%, an operating Voltage Range of 140 - 270 V, 50Hz. The luminaire should be
suitable to work in damp location, IP40 and IK08 rated. The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI
compliance, Maximum Wattages 10.5W, Minimum system Lumens 1100 for a 4ft luminaire. Philips Model Vaya cove LP G2, 1219mm / Trilux LED Cove
1200 or equivalent model from the approved list of makes. The luminaire should have UL, cUL, CE, FCC Class B, CB, SELV approbations.
3121 M
681.00 Supply, Installation, testing and commissioning of LED linear luminaire suitable for surface mounted cove application, powder coated extruded item721
aluminium/standard alloy housing, comprising of LED’s of approved make with Constant current output Switchable electronic driver with THD<10%,
Power factor 0.95 or higher, having a system level lumen of 280 lumens 2.5 watt with luminaire efficacy of not less than 100 lm/W, CRI>80, IP rating - IP20
or higher, Service Life of luminaire minimum 50,000 burning hours, with 5 years warranty on complete fitting (including driver, LED and accessories etc.)
from the actual date of completion of work, etc. as per specifications as required. (Similar to Philips Catalogue No Vaya Cove LP G2, 305mm / Trilux LED
Cove 300 or equivalent model from the approved list of makes.)
100 M
682.00 Supply ,Installation, testing and commissioning of LED 4ft x 1ft panel suitable for recessed mounting, powder coated extruded aluminium/standard alloy item722
housing, comprising of LED’s of approved make (Nichia/Cree/Philips Lumiled/Sharp/Seoul) with Constant current output Switchable electronic driver with
THD<10%, Power factor 0.95 or higher, having a system level lumen of 3200 lumens (30W) with luminaire efficacy of not less than 95 lm/W, CRI>80, IP
rating - IP20 or higher, Service Life of luminaire minimum 50,000 burning hours, with 5 years warranty on complete fitting (including driver, LED and
accessories etc.) from the actual date of completion of work, etc. as per specifications as required. (Similar to Philips Catalogue No RC380B LED32S-XXXX
L120W30 PSU OD / Trilux Enterio IND M46 OA LED 3600 840 ET / Bajaj BZRSLL GX 304W CW or equivalent model from the approved list of makes.)
50 Nos.
683.00 Supply, Installation, testing and commissioning of LED bulkhead suitable for surface/wall mounting, powder coated extruded aluminium/standard alloy item723
housing, comprising of LED’s of approved makes with Constant current output Switchable electronic driver with THD<10%, Power factor 0.95 or higher,
having a system level lumen of 600 lumens with luminaire efficacy of not less than 95 lm/W, CRI>80, IP rating - IP65 or higher, Service Life of luminaire
minimum 50,000 burning hours, with 5 years warranty on complete fitting (including driver, LED and accessories etc.) from the actual date of completion
of work, etc. as per specifications as required. (Similar to Philips Catalogue No WT202W LED6S XX PSU S2 PC / Trilux OPTIMA LED BULKHEAD / Bajaj
BIBWP LED or equivalent model from the approved list of makes.)
132 Nos.
684.00 Supply, Installation, testing and commissioning of 1200mm ceiling fans complete with double ball bearing, motor, blades, canopies, capacitor etc. item724
suitable for operation on 230 volts, 50 Hz., 1 phase, AC supply complete as required. ceiling fan, including wiring the down rods of standard length (upto
30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan
box etc. as required.
10 Nos.
685.00 Supplying,installation,testing and commissioning of Passive Infrared(PIR) technology based occupancy sensor having high preformance, non regulating item725
programmable type, suitable for connected load upto 10 A, for mounting height up to 2.8 meter and for 5 meter diameter coverage area along with
necessary fixing arrangements i/c programming at site etc. complete as required.
30 Nos.
686.00 Supplying, installation, testing and commissioning of High frequency dual technology based occupancy sensor having high performance, non regulating item726
programmable type, suitable for connected load upto 10 A, for mounting height up to 2.6 meter and for 5m X 15m coverage area along with necessary
fixing arrangements i/c programming at site etc. complete as required.
30 Nos.
687.00 Supplying, installation, testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs item727
for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with
12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required.(1 output per phase and
suitable for single phase supply)
20 Nos.
688.00 Supplying, installation, testing and commissioning of Dimming system complete with dimmers, controllers, server, network gateway, sensors required as item728
per number of dimmable fixtures as per site requirement & consisting of the followings.
0 0
688.01 Supply, Installation, Testing & Commissioning of DALI controllers with 1 universe per controller to control 64 lights per universe and maximum of 64 item729
preset scenes complete in all respect as required per site.
40 Nos.
688.02 Supply, Installation, Testing & Commissioning of Relay controller with 12 channels with switched feed-through outputs @ 10 A for each channel complete item730
in all respect as required per site.
6 Nos.
688.03 Supply, Installation, Testing & Commissioning of Astronomical timer for the timer application. Network power supply to feed the power to the network item731
complete in all respect as required per site.
1 Nos.
688.04 Supply, Installation, Testing & Commissioning of Networked Daylight Sensors for the detection of ambient lux level and maintain the required lux level item732
accordingly complete in all respect as required per site.
70 Nos.
688.05 Network gateway to connect to the BMS and integrate. item733 2 Nos.
688.06 Envision Manager software to monitor the energy consumption at the dashboard item734 1 Nos.
688.07 Supply, Installation, Testing & Commissioning of Touch Panel to Control ALL Area with GUI complete in all respect as required per site. item735 2 Nos.
688.08 Supply, Installation, Testing & Commissioning of System Power Supply to boost the system power complete in all respect as required per site. item736
1 Lot
688.09 Supply, Installation, Testing & Commissioning of Local Enclosure with Protection Devices complete in all respect as required per site. item737 5 Nos.
688.10 Supplying, installation, testing & commissioning of LED Aviation light luminaries including required driver/ control box, protections, above the highest item738
point of terrace level and making good the same. It should switch ON automatically as required in night time & OFF in day time including FRLS copper
control wiring etc. complete in all respect as required & as approved by the Engineer Incharge. (Cat . No. Bajaj BGAV 302 LED or equivalent from
approved makes/ CLIENT). (fixing height may please be considerd as per the site requirement).
4 Nos.
C LIGHTNING PROTECTION SYSTEM 0 0
689.00 Supply, Installation, and Fixing of clamp for (500 mm) air terminal, Material Stainless Steel (V4A), Complied to standard EN 62561-1 complete in all item739
respect as required.
20 Nos.
690.00 Supply, Installation, and Fixing of Angle rod with two saddle clamp for Solar panel, Material Al, Complied to standard EN 62661 - 2 complete in all respect item740
as required.
20 Nos.
691.00 Supply, Installation, and Fixing of Air Terminal 2mtr.Trapezoidal Dia (Ø16 / 10 mm), Material Al, Complying to standard EN 62561-2 complete in all respect item741
as required.
225 Nos.
692.00 Supply, Installation, and Fixing of Clamp for connecting air terminal rod to 8mm Conductor, Material Al, Clamping range 8-10mm & 2x8-10 mm, Complied item742
to standard EN 62561-1 complete in all respect as required.
20 Nos.
693.00 Supply, Installation, and Fixing of Clamp for connecting air terminal rod to 8mm Conductor, Material Al, Clamping Range 16 mm & 2x8-10 mm, Complied item743
to standard EN 62561-1 complete in all respect as required.
225 Nos.
694.00 Supply, Installation, and Fixing of Universal Clamp, Material Stainless steel, Clamping range Rd 8-10 mm, Complied to standard EN 62561-2 complete in all item744
respect as required.
400 Nos.
695.00 Supply, Installation, and Fixing of Al Round Conductor on roof (Ø 8mm), Diameter 8 mm, Material AlMgSi, Complied to standard EN 62561-2 complete in item745
all respect as required.
4300 M
696.00 Supply, Installation, and Fixing of Al Down Conductor Holder for Metal / Roof Sheet with accessories Stainless Steel Self-Threaded Screw With washer, item746
Complying to standard EN 62561-1 complete in all respect as required.
4300 Nos.
697.00 Supply, Installation, and Fixing of Al Round Conductor for Down Conductor (Ø 8mm), Material AlMgSi, Complying to standard EN 62561-2 complete in all item747
respect as required.
3500 M
698.00 Supply, Installation, and Fixing of Al Down Conductor Holder for Metal / Roof Sheet with accessories Stainless Steel Self-Threaded Screw With washer, item748
Complying to standard EN 62561-1 complete in all respect as required.
3500 Nos.
699.00 Supply, Installation, and Fixing of Test Clamp, Material StSt, Complying to standard EN 62561-1 complete in all respect as required. item749 100 Nos.
700.00 Supply, Installation, and Fixing of GI Strip for Down Conductor to earth (25x6 mm) complete in all respect as required. item750 500 M
701.00 Supply, Installation, and Fixing of GI Strip holder (25x6 mm) complete in all respect as required. item751 200 Nos.
702.00 Supply, Installation, and Fixing of 17.2 mm Copper bonded UL listed rod of 3 mtr length complete in all respect as required. item752 100 Nos.
703.00 Supply, Installation, and Fixing of Environment friendly, RoHS certified, low resistivity Ground Enhancement material in 22.6 Kg pack to fill the bore area item753
around the rod complete in all respect as required.
100 Nos.
704.00 Supply, Installation, and Fixing of StSt 316 grade clamp to terminate the load on earth electrode complete in all respect as required. item754 100 Nos.
705.00 Supply, Installation, and Fixing of Poly Plastic Pit Cover complete in all respect as required. item755 100 Nos.
706.00 Supply, Installation, and Fixing of GI Strip 25x6mm for Interconnecting Earth Pits complete in all respect as required. item756 1000 M
D EXTERNAL ROAD LIGHTING 0 0
707.00 Supply, assembly, erection, connecting, testing & commissioning of standard 10.0 metre high (above ground) GRP Pole (Pressures as per IS 875 Part-3), item757
with stiffeners, chain, Allen bolt, single arm bracket, foundation bolts, pre fabricated plate, template, accessories, nut and washers, factory finish, Base
plate. The column shall also be provided with flush door at the bottom with proper strengthening to the cut-out of the door opening, an outdoor IP-66
rated junction/ looping box with Heavy duty 3 phase & Neutral, 32 Amp connector with 10A DP MCB, double earthing arrangements, including all
accessories complete as required as per specifications & approved by the Engineer Incharge.
192 Nos.
708.00 Supply, Installation, testing and commissioning of Epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LED including item758
135 W LED sand control gear compartments, frame with heat resistant toughened clear glass fixed with SS screws. LED specification – make - CREE LED /
Equivalent, Colour temp. – 5700K ± 300K, Lens – make – Led Link / Equivalent, with 10kV external surge protecter, Input voltage range: 140–310V AC.
Side entry mounting for 50 to 60 mm OD pipe bracket. BRTFG 135W LED HXE / Philips BRP322 LED 138 CW HE NR PC S3 XT or equivalent as per approved
list of make.
192 Nos.
709.00 Supply, Installation, Testing and Commissioning of LED Post Top having Top Red Illuminated for Aesthetic & Night Lilly Appearance with a system lumen item759
output of 7000 lumens in symmetric distribution, and a minimum system efficacy of 100 lm/W, Along with 0.7m Standard Pole, The luminaire shall have a
rated system lifetime of 50,000 burning hours at L70. System wattage 70W, The luminaire should have a color temperature of 5700K and CRI > 70 and
IK10 with IEC 60598 certification. The luminaire shall meet IP66 with THD < 10% and PF > 0.9. Operating Voltage 140-270VAC,The luminaire shall have
closed diffused optics with polycarbonate diffuser board. The total power consumption should not exceed 70W (including driver). Similar to Philips City
cube post top series 70W / Trilux Tx Heritage 67 W or equivalent (Including 7 Meter Pole as per OEM/Lighting manufacturer)
16 Nos.
710.00 Supply, Installation, Testing and Commissioning of LED Post Top having Top Red Illuminated for Aesthetic & Night Lilly Appearance with a system lumen item760
output of 7000 lumens in symmetric distribution, and a minimum system efficacy of 100 lm/W, Along with 0.7m Standard Pole, The luminaire shall have a
rated system lifetime of 50,000 burning hours at L70. System wattage 70W, The luminaire should have a color temperature of 5700K and CRI > 70 and
IK10 with IEC 60598 certification. The luminaire shall meet IP66 with THD < 10% and PF > 0.9. Operating Voltage 140-270VAC,The luminaire shall have
closed diffused optics with polycarbonate diffuser board. The total power consumption should not exceed 70W (including driver). Similar to Philips City
cube post top series 70W/ Trilux Tx Heritage 67 W or equivalent (Including 5 Meter Pole as per OEM/Lighting manufacturer)
20 Nos.
711.00 Supply, Installation, Testing and Commissioning of LED Post Top having Top Red Illuminated for Aesthetic & Night Lilly Appearance with a system lumen item761
output of 7000 lumens in symmetric distribution, and a minimum system efficacy of 100 lm/W, Along with 0.7m Standard Pole, The luminaire shall have a
rated system lifetime of 50,000 burning hours at L70. System wattage 35W, The luminaire should have a color temperature of 5700K and CRI > 70 and
IK10 with IEC 60598 certification. The luminaire shall meet IP66 with THD < 10% and PF > 0.9. Operating Voltage 140-270VAC,The luminaire shall have
closed diffused optics with polycarbonate diffuser board. The total power consumption should not exceed 35W (including driver). Similar to Philips City
cube post top series 35W / Trilux Tx Heritage 40 W or equivalent (Including 3 Meter Pole as per OEM/Lighting manufacturer)
28 Nos.
712.00 Supply of 20M high mast shaft in two sections suitable for wind speed as per specifications, with raising lowering system comprising, head frame, item762
luminaries carriage suitable to install 12 nos luminaries in symmetrical arrangement, double 4
Nos.
713.00 sounder item763 0 0
713.01 Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template. item764 4 Set
713.02 Supply of non-integral floodlight luminaries type BGENF22R with two nos 400 W SV T lamps and its control gear boxes. item765 32 Nos.
713.03 Supply of LED floodlight type (BARFEG 350W LED or equivalent) item766 32 Nos.
713.04 Supply of LED type single dome aviation obstruction light. item767 4 Nos.
713.05 Supply of outdoor stand mounted feeder pillar with 63A TPN MCB incomer, single dial time switch, 45A TP contactor for the automatic switching of item768
luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals.
4 Nos.
714.00 LANDSCAPE LIGHT FITTINGS item769 0 0
714.01 Supply, installation, testing & commissioning of Ground recessed uplighter 2 MODULES LED 1180 lumen, 7 degree beam angle, 3000K color temp, IP67 item770
230V, Rated luminaire luminous flux: 848lm, Rated input power: 16W, adjustable optics +-15 degree, Electronic ballast 220/ 240V 50Hz, "Copper Free"
Aluminium die cast housing in EN AB-44100 with high resistance against corrosion. Stone wash surface treatment prior to painting process. 2 mm thick
front trim in Stainless Steel - Grade AISI 316L with 2,5 -3% molybdenum content, with high resistance against corrosion. A4 grade Stainless Steel screws
with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Similar to Simes - Zip S.8850W.19 or
CNC Inset IN006-12/ Trilux 8521Res2l/ 1500-830 1G1 ET 05/ or from approved equivalent.
170 Nos.
714.02 Supply, installation, testing & commissioning of Inground recessed 9 MODULES LED 945 lumen, 28 degree beam angle, 3000K color temp, IP67 230V , item771
Rated luminaire luminous flux: 758lm, Rated input power: 10.5W, adjustable optics +-10 degree, Electronic ballast 220÷240V 0/50/60Hz, "Copper Free"
Aluminium die cast housing in EN AB-44100 with high resistance against corrosion. Stone wash surface treatment prior to painting process. 2 mm thick
front trim in Stainless Steel - Grade AISI 316L with 2,5 -3% molybdenum content, with high resistance against corrosion. A4 grade Stainless Steel screws
with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Similar to Simes - MEGA PLANO 260mm
S.5468W or CNC Inset IN006-10/ Trilux 8511RMS1L/ 1000-830 1G1 ET (13W 1000lm, beam angle 30°) or from approved equivalent.
40 Nos.
714.03 Supply, installation, testing & commissioning of Cylindrical Bollard Light, die-cast aluminium cap (low copper content) & extruded aluminium pole, item772
polycarbonate diffuser,double layer coating for high resistance to corrosion,first layer of epoxy powder, second layer polyester powder,compliance with
EN 60598-1 standards, LED 3000K, min. 2750lm , height 1000mm,360 degree emission,anthracite finish, IP 65/66. : Bega-77792/ Trilux 8851 RB/ 2000-
730 2G1S ET28W or from approved equivalent.
90 Nos.
714.04 Supply, installation, testing & commissioning of In ground-recessed luminaire with swivel mounted and rotatable LED optical system, luminaire made of item773
Stainless Steel, Safety Class 1, Protection IP68, Can take pressure load of 2000Kg, Impact Strenght IK10,Beam Angle 26 degree Luminaire Luminous flux
1410lumens, Module Luminous Flux 3240lumens,Dia 300mm Depth 225mm, Adjustable +/- 30degrees. Similar to Bega-77130K3/ Trilux 8521RM2R/1800-
830 1G1 ET (20W 1800lm) beam angle 30° or from approved equivalent.
30 Nos.
714.05 Supply, installation, testing & commissioning of In ground-recessed luminaire with swivel mounted and rotatable LED optical system, luminaire made of item774
Stainless Steel, Safety Class 1, Protection IP68, Can take pressure load of 2000Kg, Impact Strenght IK10Beam angle 64 degree, Luminaire Luminous flux
282lumens, Module Luminous Flux 560lumens,Dia 155mm Depth 160mm, Adjustable +/- 30 degrees. Similar to Bega-77066K3 / Trilux 8501RB2L/500-
840 1G1 ETD 05 (5W 500lm, beam angle 50°)or equivalent.
60 Nos.
714.06 Supply, installation, testing & commissioning of Inground Recessed Uplighter with integral driver with minimum system efficacy of 72 lm/ W. The item775
luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 3000K and CRI > 75, 24
degree beam angle. The luminaire shall meet IP67 rating and IK10 with THD < 20% and PF > 0.9. The luminaire Housing should be of die-cast aluminum
with Cover of stainless steel, gasket made of heat resistant silicone rubber. The total power consumption should not exceed 16W (including driver).
Similar to Philips Make Vaya Uplite "BBP330 9xLED-HP/WW 220-240V 24 " / Trilux 8521RMS1L/1350-830 1G1 ET 05 (13W 1000lm, beam angle 30°)
40 Nos.
714.07 Supply, installation, testing & commissioning of Inground Recessed Uplighter with integral driver with a system lumen output of 1138lm lumens and a item776
minimum system efficacy of 72 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color
temperature of 3000K and CRI > 75, 12 degree beam angle. The luminaire shall meet IP67 rating and IK10 with THD < 20% and PF > 0.9. The luminaire
Housing should be of die-cast aluminum with Cover of stainless steel, gasket made of heat resistant silicone rubber. The total power consumption should
not exceed 16W (including driver). Similar to Philips Make Vaya Uplite "BBP330 9xLED-HP/WW 220-240V 12 " / Trilux 8511RES2L/1000-830 1G1 ET (13W
1000lm, beam angle 10°) or equivalent
40 Nos.
714.08 Supply, installation, testing & commissioning of LED based Architectural Flood light, housing made up of Compact die-cast aluminium with powdercoated item777
finish and tampered lens. The fixture should have a minimum system efficacy of 83 lumen/ Watt and a minimum system lumen output of 5656 lumens
and maximum system wattage of 68 Watts. The fix ture shall have a CRI of minimum 80, CCT of 3000K and 20/40 degree beam angle. The fixture shall be
designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP66 (lamp and gear Compartment) and Mechanical Impact
Resistance Rating of IK 09.The fixture driver should have an operating voltage range of 140-270 V, PF >0.9 and THD<20%. The fixture should comply with
the parameters as per IS10322. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Similar to
Trilux COMBIAL 30-RB8R/7500-730 1G1W ET (71W 7500lm) / Vaya Flood MP, 3000K or equivalent.
15 Nos.
715.00 Providing, laying, fixing, connecting and testing of undernoted sizes of GI strip/GI wire from earth electrode to equipment loop and earthing system, in item778
trenches, on surfaces, along pole or along M.S. support, etc. including excavation where required for laying the copper strip/ GI strip and filling back
complete, conforming to relevant IS and all as specified.
0 0
715.01 GI wire 8 SWG item779 8000 Metre
715.02 GI wire 6 SWG item780 6500 Metre
715.03 Hot dip GI strip 25mmx 5mm on surface or in recess item781 1000 Metre
716.00 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking item782
arrangement and watering pipe etc. with charcoal/ coke and salt as required.
30 Set
717.00 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II item783
complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand
cushioning and protective covering etc., complete as required.
0 0
717.01 63 mm dia (OD-63 mm & ID-51 mm nominal) item784 1500 M
717.02 90 mm dia (OD-90 mm & ID-76 mm nominal) item785 1800 M
717.03 120 mm dia (OD-120 mm & ID-103 mm nominal) item786 800 M
717.04 160 mm dia (OD-160 mm & ID-135 mm nominal) item787 1000 M
EXTERNAL ELECTRICAL WORKS 0 0
E HT PANELS 0 0.00
718.00 33 KV HT PANEL BOARD - MAIN RECEIVING SUBSTATION (LOC: NEAR METER ROOM) item788 0 0
Supply, Installation, Testing & Commissioning of indoor type, floor mounted, metal clad, fully-partitioned, totally enclosed 33kV Switch Board VCB panel
as per IS/IEC 62271 as amended up to date and as per specifications, having 03Nos. VCBs arranged in configuration 01no. Incomer, 02no.Outgoings as per
SLD. Panel shall house breakers having totally enclosed, fully interlocked, horizontal isolation, horizontal drawout on floor, vacuum interrupters with trip
free mechanism, motorised charged (230VAC) and auto/manual tripping/closing continuous duty coils (24VDC), ON/OFF indicators, in-built spring
charging handle, hand trip device and mechanical anti-pumping arrangement, suitable for 33 KV, 3-Phase, 50Hz A.C. supply with fault level of 1500MVA,
associated CTs/PTs, bus-bars, cable-chambers all enclosed inside arc-proof chambers made from corrosion resistant Galvanized/Aluzinc sheets 2mm thick
enclosure, complete with capability to handle short time current of 26.3kA for 03 sec, Internal Arc 26.3 kA for 01 sec (AFLR as per IEC) also as per site
requirement and as per local electricity authority complete. The panel shall be complete with interconnections, space heaters, earthing, etc. and
equipped with following switchgears and accessories including making capacity earth switch on each feeder, connections suitable for cable upto 2Rx3C x
300sqmm XLPE cable of 33KV grade (cable entry from bottom). MP based (O/C + E/F) with HT switchgear including suitable protection relays, metering,
LED indications, push buttons, busbars, copper FRLS control wiring with minimum 2.5sq.mm etc. as per the requirement detailed in the tender
documents/ SLD etc. complete with self contained, fully interlocked, rack in and rack out mechanism, AL bus bars with PVC heat shrinkable sleeves of
800 Amps capacity also featured with mechanical ON/OFF indicator as required. The panel shall be complete in all respects including foundation frame,
bolting, grouting and shall be installed with sufficient clearance from side/rear/top as per safety guidelines. (The panel shall be SCADA/BMS compatible ).
0 0
The panel shall be complete with suitable surge protection device required for the suitable voltage level and withstanding current. The panel shall be
housed with in-built gas suppression system including suitable piping, actuation arrangement, nozzles and associated panels complete as per
specifications and standards.
0 0
01 no. Incomer VCB Panels, each comprising of 0 0
33kV, 630A, 26.3kA/3-sec Vacuum Circuit Breaker as per IEC-62271 and as prescribed above. 0 0
Set of 03nos. current transformers 33kV, 200-100/5/5A, Core1: Class 5P10, 15VA, Core2: Class 0.5, 15VA 0 0
Set of 03nos. Fixed PTs, Single Phase having ratio 33kV/rt3:110V/rt3, 100VA, Class 0.5 with Digital Voltmeter (Acc.Cl.0.5) having selector switches and
protection HV fuses LV MPCB for HT metering upto 36KV
0 0
Lockable Local-Remote Switch, Breaker Control Switch (T-N-C), space heater with thermostat, DC & AC control circuit through MCB, 0 0
LEDs for RYB, spring charge, DC Supply healthy, Breaker ON/OFF and TEST/ SERVICE position; 6-Window Annunciator along with Hooter 0 0
(i) Multifunction Meter (Acc.Cl.0.5) with Max. Demand Indication, Modbus communicable for SCADA/BMS integration,
(ii) Digital Ammeter (Acc.Cl.0.5) with selector switches,
(iii) Digital KWH meter (Acc.Cl.0.5) with selector switches
0 0
Numerical Main Protection Relay, drawout type, generally confirming to IEC60255, having with microprocessor based protection scheme for detecting,
indicating and tripping the breaker on critical faults like
(i) directional over-current, earth-fault in the three phases,
(ii) negative sequence currents due to line-to-line or conductor-break faults,
(iii) residual and three-phase under-voltages/over-voltages,
(iv) circuit-breaker-failure alarm,
(v) tripping-circuit-failures and inter-panel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol.
The relay shall be integrated with the feeder, capturing status like Breaker On/Off/Spring. Chrgd/Test/Service/AC-Fail, Line-Current, Line-Voltage etc. and
display the same locally on back-lit LCD screen, remotely on IEC61850 platform on ethernet.
0 0
Master-Trip and Trip-Circuit Supervision shall be provided preferably as part of main-protection relay or otherwise separately, pluggable relays for contact
multiplication, anti-pumping, spring-charging indication etc. where applicable shall be provided. The panel shall be complete with FRLS wiring, Terminal
Blocks, cable-ducts, isolation MCBs, LED's illumination, power-socket and space-heater as per requirement.
0 0
02nos. Outgoing VCB Panels each comprising of 0 0
33kV, 630A, 26.3kA/3-sec Vacuum Circuit Breaker as per IEC-62271, as prescribed above. 0 0
Set of 03nos. Current Transformers 33kV, 200-100/5-5A, Core1: Class 5P10, 15VA, Core2: Class 0.5, 15VA 0 0
Lockable Local-Remote Switch, Breaker Control Switch (T-N-C), space heater with thermostat, DC & AC control circuit through MCB, 0 0
LEDs for RYB, spring charge, DC Supply healthy, Breaker ON/OFF and TEST/ SERVICE position; 8-Window Annunciator along with Hooter 0 0
(i) Multifunction Meter (Acc.Cl.0.5) with Max. Demand Indication, Modbus communicable for SCADA/BMS integration
(ii) Digital Ammeter (Acc.Cl.0.5)
(iii) Digital Voltmeter (Acc.Cl.0.5)
0 0
Numerical Main Protection Relay, drawout type, generally confirming to IEC60255, having with microprocessor based protection scheme for detecting,
indicating and tripping the breaker on critical faults like
(i) directional over-current, earth-fault in the three phases,
(ii) negative sequence currents due to line-to-line or conductor-break faults,
(iii) circuit-breaker-failure alarm,
(iv) tripping-circuit-failures and inter-panel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol.
The relay shall be integrated with the feeder, capturing status like Breaker On/Off/Spring. Chrgd/Test/Service/AC-Fail, Line-Current, Line-Voltage etc. and
display the same locally on back-lit LCD screen, remotely on IEC61850 platform on ethernet.
0 0
Master-Trip and Trip-Circuit Supervision shall be provided preferably as part of main-protection relay or otherwise separately, Pluggable Relays for contact
multiplication, anti-pumping, spring-charging indication etc. where applicable shall be provided. The panel shall be complete with FRLS wiring, Terminal
Blocks, cable-trays, isolation MCBs, LED illumination, power-socket and space-heater as per requirement.
0 0
Busbars 0 0
800 amps TP,36 KV Al. Bus bar with heat shrinkable insulated sleeves in self-supported, insulator-free design to withstand full short circuit currents upto
26.3 kA for three second of suitable size as per panel configuration.
0 0
230V, single phase 2 wire AC to 24V DC Batteries charger with semiconductor/IGBT full wave rectifier with auto /manual float cum boost facility
complete with 24V DC, 120 AH sealed maintenance free batteries including one no. distribution board having 32 Amps DP MCB as incomer and 8 Nos.
20/16A DP MCB's (D.C. duty) as outgoing complete as required and as per technical specifications.
0 0
33 KV HT PANEL BOARD - MAIN RECEIVING SUBSTATION AS ABOVE 1 Nos.
719.00 33 KV HT MAIN PANEL BOARD - MAIN RECEIVING SUBSTATION (LOC: SERVICE YARD) item789 0 0
Supply, Installation, Testing & Commissioning of indoor type, floor mounted, metal clad, fully-partitioned, totally enclosed 33kV Switch Board VCB panel
as per IS/IEC 62271 as amended up to date and as per specifications, having 07 Nos. VCBs arranged in configuration 02 nos. Incomer, 02 nos. Bus coupler,
03 nos. outgoings as per SLD. Panel shall house breakers having totally enclosed, fully interlocked, horizontal isolation, horizontal drawout on floor,
vacuum interrupters with trip free mechanism, motorised charged (230VAC) and auto/manual tripping/closing continuous duty coils (24VDC), ON/OFF
indicators, in-built spring charging handle, hand trip device and mechanical anti-pumping arrangement, suitable for 33 KV, 3-Phase, 50Hz A.C. supply with
fault level of 1500MVA, associated CTs/PTs, bus-bars, cable-chambers all enclosed inside arc-proof chambers made from corrosion resistant
Galvanized/Aluzinc sheets 2mm thick enclosure, complete with capability to handle short time current of 26.3kA for 03 sec, Internal Arc 26.3 kA for 01
sec (AFLR as per IEC) also as per site requirement and as per local electricity authority complete. The panel shall be completed with interconnections,
space heaters, earthing, etc. and equipped with following switchgears and accessories including making capacity earth switch on each feeder,
connections suitable for cable upto 2Rx3C x 300sqmm XLPE cable of 33KV on incomer & outgoing 1Rx3C x 300sqmm of same grade (cable entry from
bottom). MP based (O/C + E/F) with HT switchgear including suitable protection relays, metering, LED indications, push buttons, busbars, copper FRLS
control wiring with minimum 2.5sq.mm etc. as per the requirement detailed in the tender documents/ SLD etc. complete with self contained, fully
interlocked, rack in and rack out mechanism, AL bus bars with PVC heat shrinkable sleeves of 800 Amps capacity also featured with mechanical ON/OFF
indicator as required. The panel shall be completed in all respects including foundation frame, bolting, grouting and shall be installed with sufficient
clearance from side/rear/top as per safety guidelines. (The panel shall be SCADA/BMS compatible with required no. of NO/NC potential free contacts)
0 0
The panel shall be complete with suitable surge protection device required for the suitable voltage level and withstanding current. The panel shall be
housed with in-built gas suppression system including suitable piping, actuation arrangement, nozzles and associated panels complete as per
specifications and standards.
0 0
02nos. Incomer VCB Panels, each comprising of 0 0
33kV, 630A, 26.3kA/3-sec Vacuum Circuit Breaker as per IEC-62271, as prescribed above. 0 0
Set of 03nos. Current Transformers 33kV, 200-100/5-5A, Core1: Class 5P10, 15VA, Core2: Class 0.5, 15VA 0 0
Set of 03nos. Fixed PTs, Single Phase having ratio 33kV/rt3:110V/rt3, 100VA, Class 0.5 with Digital Voltmeter (Acc.Cl.0.5) having selector switches and
protection HV fuses LV MPCB for HT metering upto 36KV
0 0
Lockable Local-Remote Switch, Breaker Control Switch (T-N-C), space heater with thermostat, DC & AC control circuit through MCB, 0 0
LEDs for RYB, spring charge, DC Supply healthy, Breaker ON/OFF and TEST/ SERVICE position; 6-Window Annunciator along with Hooter 0 0
(i) Multifunction Meter (Acc.Cl.0.5) with Max. Demand Indication, Modbus communicable for SCADA/BMS integration,
(ii) Digital Ammeter (Acc.Cl.0.5)
(iii) Digital KWH meter (Acc.Cl.0.5)
0 0
Numerical Main Protection Relay, drawout type, generally confirming to IEC60255, having with microprocessor based protection scheme for detecting,
indicating and tripping the breaker on critical faults like
(i) directional over-current, earth-fault in the three phases,
(ii) negative sequence currents due to line-to-line or conductor-break faults,
(iii) residual and three-phase under-voltages/over-voltages,
(iv) circuit-breaker-failure alarm,
(v) tripping-circuit-failures and interpanel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol.
The relay shall be integrated with the feeder, capturing status like Breaker On/Off/Spring. Chrgd/Test/Service/AC-Fail, Line-Current, Line-Voltage etc. and
display the same locally on back-lit LCD screen, remotely on IEC61850 platform on ethernet.
0 0
Master-Trip and Trip-Circuit Supervision shall be provided preferably as part of main-protection relay or otherwise separately, Pluggable Relays for contact
multiplication, anti-pumping, spring-charging indication etc. where applicable shall be provided. The panel shall be complete with FRLS wiring, Terminal
Blocks, cable-ducts, isolation MCBs, led illumination, power-socket and space-heater as per requirement.
0 0
03nos. Outgoing VCB Panels as Trafo Feeders, each comprising of 0 0
Set of 03nos. Current Transformers 33kV, 150-80/5-5, Core1: Class 5P10, 15VA, Core2: Class 0.5, 15VA, Core03: Class PS, 15VA 0 0
Lockable Local-Remote Switch, Breaker Control Switch (T-N-C), space heater with thermostat, DC & AC control circuit through MCB, 0 0
LEDs for spring charge, DC Supply healthy, Breaker ON/OFF and TEST/ SERVICE position; 12-Window Annunciator along with Hooter with suitable labels
for WTI/OTI/Buccholz Alarm/Gas alarm/Trip
0 0
(i) Multifunction Meter (Acc.Cl.0.5) with Max. Demand Indication, Modbus communicable for SCADA/BMS integration,
(ii) Digital Ammeter (Acc.Cl.0.5)
(iii) Digital KWH meter (Acc.Cl.0.5)
0 0
Numerical Main Protection Relay, drawout type, generally confirming to IEC60255, having microprocessor based protection scheme for detecting,
indicating and tripping the breaker on critical faults like
(i) Differential/Unit protection of Transformer
(ii) Restricted Earth Fault for solidly grounded transformer on Secondary side
(iii) Over-Current & Earth-Fault detection for both Transformer primary and secondary
(iv) Negative sequence faults due to line-to-line or conductor break
(v) Three-phase under/over-voltage protection
(vi) Transformer auxiliary protections
(vii) circuit-breaker-failure alarm,
(viii) tripping-circuit-failures and interpanel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol. The relay shall
be integrated with the feeder, capturing statuses like Breaker On/Off//Test/Service/AC-Fail, Buccholz/OTI/WTI Alarm/Gas pressure/Trip, Line-Current,
Bus-Voltage etc. and display the same locally on back-lit LCD screen as SLD/mimic with power & frequency measurements, remotely on station bus over
IEC61850 platform and locally on LAN over in-built WebHMI without requiring any special software (free or chargeable).
0 0
Aux. relays like Master-Trip and Trip-Circuit Supervision shall be provided preferably as part of main-protection relay or otherwise separately, Pluggable
Relays for contact multiplication, anti-pumping, spring-charging indication etc. where applicable shall be provided. The panel shall be complete with FRLS
wiring, Terminal Blocks, cable-ducts, isolation MCBs, led illumination, power-socket and space-heater as per requirement.
0 0
02nos. Bus Coupler Panels, each comprising of 0 0
33kV, 630A, 26.3kA/3-sec Vacuum Circuit Breaker as per IEC-62271 including associated Bus riser panels 0 0
Set of 03nos. Fixed PTs, Single Phase having ratio 33kV/rt3:110V/rt3, 100VA, Class 0.5 with Digital Voltmeter (Acc.Cl.0.5) having selector switches and
protection HV fuses LV MPCB for HT metering upto 36KV
0 0
Lockable Local-Remote Switch, Breaker Control Switch (T-N-C), space heater with thermostat, DC & AC control circuit through MCB, 0 0
LEDs for spring charge, DC Supply healthy, Breaker ON/OFF and TEST/ SERVICE position; 0 0
Numerical Main Protection Relay, drawout type, generally confirming to IEC60255,with microprocessor based protection scheme for detecting, indicating
and tripping the breaker on critical faults like
(i) Synchro-Check and Energizing Check b/w bus-voltages on either side of coupler
(ii) circuit-breaker-failure alarm,
(iii) tripping-circuit-failures and interpanel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol.
The relay shall be integrated with the feeder, capturing statuses like Breaker On/Off//Test/Service/AC-Fail, Line-Voltage etc. and display the same locally
on back-lit LCD screen as SLD/mimic with voltage & frequency measurements, remotely on station bus over IEC61850 platform and locally on LAN over in-
built WebHMI without requiring any special software (free or chargeable).
0 0
Aux. relays like Master-Trip and Trip-Circuit Supervision shall be provided preferably as part of main-protection relay or otherwise separately, Pluggable
Relays for contact multiplication, anti-pumping, spring-charging indication etc. where applicable shall be provided. The panel shall be complete with FRLS
wiring, Terminal Blocks, cable-trays, isolation MCBs, led illumination, power-socket and space-heater as per requirement.
0 0
01no. Bus PT Panels comprising of 0 0
The BusPT panel shall be installed in the remaining bus-section(s) which does not have any other BusPT connected to it. 0 0
Set of 03nos. Fixed PTs, Single Phase having ratio 33kV/rt3:110V/rt3, 100VA, Class 0.5 with Digital Voltmeter (Acc.Cl.0.5) having selector switches and
protection HV fuses LV MPCB for HT metering upto 36KV
0 0
LEDs for R-Y-B 0 0
The panel shall be complete with FRLS wiring, Terminal Blocks, cable-trays, isolation MCBs, CFL illumination, power-socket and space-heater with
thermostat as per requirement.
0 0
Busbars 0 0
800 amps TP,36 KV Al. Bus bar with heat shrinkable insulated sleeves in self-supported, insulator-free design to withstand full short circuit currents upto
26.3 kA for three second of suitable size as per panel configuration.
0 0
230V, single phase 2 wire AC to 24V DC Batteries charger with semiconductor/IGBT full wave rectifier with auto /manual float cum boost facility
complete with 24V DC, 120 AH sealed maintenance free batteries including one no. distribution board having 32 Amps DP MCB as incomer and 8 Nos.
20/16A DP MCB's (D.C. duty) as outgoing complete as required and as per technical specifications.
0 0
33 KV HT MAIN PANEL BOARD - MAIN RECEIVING SUBSTATION AS ABOVE 1 Nos.
720.00 Supply, installation (inclusive all civil works for making of foundation), testing & commissioning of 33 KV 4 pole structure( poles shall be suitable for item790
marine environment & insulating properties, suitable di-electric strength, load bearing capacities required for this application) for receiving 33KV
overhead supply line & for termination of 33KV load side O/G cable; complete with 33KV pin / disc insulators, all cross - members / supports with
hardwares, GI stay wires, complete with 3 nos. single pole Lightning Arrester, station type, heavy duty, lighting arrestor suitable for 33KV solidly earthed
neutral system complete with suitable bimetallic connectors for wire/ cable connections, all accessories etc. and 33KV 630A TP gang operated off-load
AB switch with extended handle upto pole bottom, ground earthing of structure, required pipe for incoming & outgoing 33KV cables, clamping complete
in every aspect with all accessories etc. complete as required & approved by the local electricity board authority.
1 Set
721.00 11 KV MAIN HT PANEL BOARD (LOC: SERVICE YARD) item791 0 0
Supply, Installation, Testing & Commissioning of indoor type, floor mounted, metal clad, fully-partitioned, totally enclosed 11kV Switch Board VCB panel
as per IS/IEC 62271 as amended up to date and as per specifications, having 13 Nos. VCBs arranged in configuration 03 nos. Incomer, 02 nos. Bus coupler,
08 nos. outgoings as per shall house breakers having totally enclosed, fully interlocked, horizontal isolation, horizontal drawout on floor, vacuum
interrupters with trip free mechanism, motorised charged (230VAC) and auto/manual tripping/closing continuous duty coils (24VDC), ON/OFF indicators,
in-built spring charging handle, hand trip device and mechanical anti-pumping arrangement, suitable for 11 KV, 3-Phase, 50Hz A.C. supply with fault level
of 500MVA, associated CTs/PTs, bus-bars, cable-chambers all enclosed inside arc-proof chambers made from corrosion resistant Galvanized/Aluzinc
sheets 2mm thick enclosure, complete with capability to handle short time current of 26.3kA for 03 sec, Internal Arc 26.3 kA for 01 sec (AFLR as per IEC)
also as per site requirement and as per local electricity authority complete. The panel shall be completed with interconnections, space heaters, earthing,
etc. and equipped with following switchgears and accessories including making capacity earth switch on each feeder, connections suitable for cable upto
2Rx3C x 300sqmm XLPE cable of 11KV grade (cable entry from bottom). MP based (O/C,SC + E/F) with HT switchgear including suitable protection relays,
metering, LED indications, push buttons, busbars, copper FRLS control wiring with minimum 2.5sq.mm etc. as per the requirement detailed in the tender
documents/ SLD etc. complete with self contained, fully interlocked, rack in and rack out mechanism, AL bus bars with PVC heat shrinkable sleeves of
800 Amps capacity also featured with mechanical ON/OFF indicator as required. The panel shall be completed in all respects including foundation frame,
bolting, grouting and shall be installed with sufficient clearance from side/rear/top as per safety guidelines.(The panel shall be SCADA/BMS compatible
with required no. of NO/NC potential free contacts).
0 0
The panel shall be complete with suitable surge protection device required for the suitable voltage level and withstanding current. The panel shall be
housed with in-built gas suppression system including suitable piping, actuation arrangement, nozzles and associated panels complete as per
specifications and standards.
0 0
03nos. Incomer VCB Panels each comprising of 0 0
11kV, 630A, 26.3kA/3-sec Vacuum Circuit Breaker as per IEC-62271, as prescribed above. 0 0
Set of 03nos. Current Transformers 11kV, 400-200/5-5A, Core1: Class 5P10, 15VA, Core2: Class 0.5,15VA 0 0
Set of 03nos. Current Transformers 11kV, 400/5, Class PS, 5VA for REF Protection 0 0
Set of 03nos. Fixed PTs, Single Phase having ratio 11kV/rt3:110V/rt3, 100VA, Class 0.5 with Digital Voltmeter (Acc.Cl.0.5) having selector switches and
protection HV fuses LV MPCB for HT metering upto 12KV
0 0
Lockable Local-Remote Switch, Breaker Control Switch (T-N-C), space heater with thermostat, DC & AC control circuit through MCB, 0 0
LEDs for RYB, spring charge, DC Supply healthy, Breaker ON/OFF and TEST/ SERVICE position; 12-Window Annunciator along with Hooter 0 0
(i) Multifunction Meter (Acc.Cl.0.5) with Max. Demand Indication, Modbus communicable for SCADA/BMS integration,
(ii) Digital Ammeter (Acc.Cl.0.5)
(iii) Digital KWH meter (Acc.Cl.0.5)
0 0
Numerical Main Protection Relay, drawout type, generally confirming to IEC60255, having microprocessor based protection scheme for detecting,
indicating and tripping the breaker on critical faults like
(i) directional over-current , earth-fault in three phases,
(ii) negative sequence currents due to line-to-line or conductor-break faults,
(iii) residual and three-phase under-voltages/over-voltages,
(iv) Synchro-Check and Energizing Check b/w voltages on bus-side and line-side
(v) circuit-breaker-failure alarm,
(vi) tripping-circuit-failures and interpanel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol.
The relay shall be integrated with the feeder, capturing status like Breaker On/Off/Spring. Chrgd/Test/Service/AC-Fail, Line-Current, Line-Voltage etc. and
display the same locally on back-lit LCD screen, remotely on IEC61850 platform on ethernet.
0 0
Aux. relays like Master-Trip and Trip-Circuit Supervision shall be provided preferably as part of main-protection relay or otherwise separately, Pluggable
Relays for contact multiplication, anti-pumping, spring-charging indication etc. where applicable shall be provided. The panel shall be complete with FRLS
wiring, Terminal Blocks, cable-ducts, isolation MCBs, led illumination, power-socket and space-heater as per requirement.
0 0
06nos. Outgoings, 02no. Spares VCB Panel each comprising of 0 0
11kV, 630A, 26.3kA/3-sec Vacuum Circuit Breaker Panel as per IEC-62271,as prescribed above. 0 0
Set of 03nos. Current Transformers 11kV, 300-150/5-5A, Core1: Class 5P10, 15VA, Core2: Class 0.5, 15VA ( 4 nos.) 0 0
Set of 03nos. Current Transformers 11kV, 200-100/5-5A, Core1: Class 5P10, 15VA, Core2: Class 0.5, 15VA ( 4 nos.) 0 0
Lockable Local-Remote Switch, Breaker Control Switch (T-N-C), space heater with thermostat, DC & AC control circuit through MCB, 0 0
LEDs for spring charge, DC Supply healthy, Breaker ON/OFF and TEST/ SERVICE position; 06-Window Annunciator along with Hooter 0 0
(i) Multifunction Meter (Acc.Cl.0.5) with Max. Demand Indication, Modbus communicable for SCADA/BMS integration,
(ii) Digital Ammeter (Acc.Cl.0.5) with selector switches
0 0
Numerical Main Protection Relay, drawout type, generally confirming to IEC60255, having 04CT Inputs with microprocessor based protection scheme for
detecting, indicating and tripping the breaker on critical faults like
(i) non-directional over-current , earth-fault in the three phases,
(ii) negative sequence currents due to line-to-line or conductor-break faults,
(iii) circuit-breaker-failure alarm,
(iv) tripping-circuit-failures and interpanel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol.
The relay shall be integrated with the feeder, capturing status like Breaker On/Off/Spring. Chrgd/Test/Service/AC-Fail, Line-Current, Line-Voltage etc. and
display the same locally on back-lit LCD screen, remotely on IEC61850 platform on ethernet.
0 0
Master-Trip and Trip-Circuit Supervision shall be provided preferably as part of main-protection relay or otherwise separately, Pluggable Relays for contact
multiplication, anti-pumping, spring-charging indication etc. where applicable shall be provided. The panel shall be complete with FRLS wiring, Terminal
Blocks, cable-ducts, isolation MCBs, led illumination, power-socket and space-heater as per requirement.
0 0
02nos. Bus Coupler Panels, each comprising of 0 0
11kV, 630A, 26.3kA/3-sec Vacuum Circuit Breaker Panel as per IEC-62271, including associated Bus Riser panels 0 0
Numerical Main Protection Relay, drawout type, generally confirming to IEC60255,with microprocessor based protection scheme for detecting, indicating
and tripping the breaker on critical faults like
(i) Synchro-Check and Energizing Check b/w bus-voltages on either side of coupler
(ii) circuit-breaker-failure alarm,
(iii) tripping-circuit-failures and interpanel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol.
The relay shall be integrated with the feeder, capturing status like Breaker On/Off/Spring. Chrgd/Test/Service/AC-Fail, Line-Current, Line-Voltage etc. and
display the same locally on back-lit LCD screen, remotely on IEC61850 platform on ethernet.
0 0
Lockable Local-Remote Switch, Breaker Control Switch (T-N-C), space heater with thermostat, DC & AC control circuit through MCB, 0 0
LEDs for spring charge, DC Supply healthy, Breaker ON/OFF and TEST/ SERVICE position; 0 0
The panel shall be complete with FRLS wiring, Terminal Blocks, cable-ducts, isolation MCBs, led illumination, power-socket and space-heater as per
requirement.
0 0
Busbars 0 0
800 amps TP,12 KV Al. Bus bar with heat shrinkable insulated sleeves in self-supported, insulator-free design to withstand full short circuit currents upto
26.3 kA for three second of suitable size as per panel configuration.
0 0
11 KV MAIN HT PANEL BOARD (LOC: SERVICE YARD) AS ABOVE 1 Nos.
722.00 11 KV HT PANEL BOARD HVAC YARD (LOC: SERVICE YARD) item792 0 0
Supply, Installation, Testing & Commissioning of indoor type, floor mounted, metal clad, fully-partitioned, totally enclosed 11kV Switch Board VCB panel
as per IS/IEC 62271 as amended up to date and as per specifications, having 10 Nos. VCBs arranged in configuration 04 nos. Incomer, 02 nos. Bus coupler,
04 nos. outgoings as per specs. & sld shall house breakers having totally enclosed, fully interlocked, horizontal isolation, horizontal drawout on floor,
vacuum interrupters with trip free mechanism, motorised charged (230VAC) and auto/manual tripping/closing continuous duty coils (24VDC), ON/OFF
indicators, in-built spring charging handle, hand trip device and mechanical anti-pumping arrangement, suitable for 11 KV, 3-Phase, 50Hz A.C. supply with
fault level of 350MVA, associated CTs/PTs, bus-bars, cable-chambers all enclosed inside arc-proof chambers made from corrosion resistant
Galvanized/Aluzinc sheets 2mm thick enclosure, complete with capability to handle short time current of 18.4kA for 03 sec, Internal Arc 18.4 kA for 01
sec (AFLR as per IEC) also as per site requirement and as per local electricity authority complete. The panel shall be completed with interconnections,
space heaters, earthing, etc. and equipped with following switchgears and accessories including making capacity earth switch on each feeder,
connections suitable for cable upto 3C x 300sqmm XLPE cable of 11KV grade (cable entry from bottom).MP based (O/C,SC + E/F) with HT switchgear
including suitable protection relays, metering, LED indications, push buttons, busbars, copper FRLS control wiring with minimum 2.5sq.mm etc. as per the
requirement detailed in the tender documents/ SLD etc. complete with self contained, fully interlocked, rack in and rack out mechanism, AL bus bars with
PVC heat shrinkable sleeves of 800 Amps capacity also featured with mechanical ON/OFF indicator as required. The panel shall be completed in all
respects including foundation frame, bolting, grouting and shall be installed with sufficient clearance from side/rear/top as per safety guidelines.(The
panel shall be SCADA/BMS compatible with required no. of NO/NC potential free contacts).
0 0
The panel shall be complete with suitable surge protection device required for the suitable voltage level and withstanding current. The panel shall be
housed with in-built gas suppression system including suitable piping, actuation arrangement, nozzles and associated panels complete as per
specifications and standards.
0 0
04nos. Incomer VCB Panels each comprising of 0 0
11kV, 630A, 18.4kA/3-sec Vacuum Circuit Breaker as per IEC-62271, as prescribed above. 0 0
Set of 03nos. Current Transformers 11kV,200/100/5-5A, Core1: Class 5P10, 15VA, Core2: Class 0.5,15VA 0 0
Set of 03nos. Fixed PTs, Single Phase having ratio 11kV/rt3:110V/rt3, 100VA, Class 0.5 with Digital Voltmeter (Acc.Cl.0.5) having selector switches and
protection HV fuses LV MPCB for HT metering upto 12KV
0 0
Lockable Local-Remote Switch, Breaker Control Switch (T-N-C), space heater with thermostat, DC & AC control circuit through MCB, 0 0
LEDs for RYB, spring charge, DC Supply healthy, Breaker ON/OFF and TEST/ SERVICE position; 6-Window Annunciator along with Hooter 0 0
(i) Multifunction Meter (Acc.Cl.0.5) with Max. Demand Indication, Modbus communicable for SCADA/BMS integration,
(ii) Digital Ammeter (Acc.Cl.0.5)
(iii) Digital KWH meter (Acc.Cl.0.5)
0 0
Numerical Main Protection Relay, drawout type, generally confirming to IEC60255, having microprocessor based protection scheme for detecting,
indicating and tripping the breaker on critical faults like
(i) directional over-current , earth-fault in three phases,
(ii) negative sequence currents due to line-to-line or conductor-break faults,
(iii) residual and three-phase under-voltages/over-voltages,
(iv) Synchro-Check and Energizing Check b/w voltages on bus-side and line-side
(v) circuit-breaker-failure alarm,
(vi) tripping-circuit-failures and interpanel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol.
The relay shall be integrated with the feeder, capturing status like Breaker On/Off/Spring. Chrgd/Test/Service/AC-Fail, Line-Current, Line-Voltage etc. and
display the same locally on back-lit LCD screen, remotely on IEC61850 platform on ethernet.
0 0
Aux. relays like Master-Trip and Trip-Circuit Supervision shall be provided preferably as part of main-protection relay or otherwise separately, Pluggable
Relays for contact multiplication, anti-pumping, spring-charging indication etc. where applicable shall be provided. The panel shall be complete with FRLS
wiring, Terminal Blocks, cable-ducts, isolation MCBs, led illumination, power-socket and space-heater as per requirement.
0 0
03nos. Outgoings, 01no. Spares VCB Panel 0 0
11kV, 630A, 18.4kA/3-sec Vacuum Circuit Breaker Panel as per IEC-62271,as prescribed above. 0 0
Set of 03nos. Current Transformers 11kV, 150-80/5-5A, Core1: Class 5P10, 15VA, Core2: Class 0.5, 15VA 0 0
Lockable Local-Remote Switch, Breaker Control Switch (T-N-C), space heater with thermostat, DC & AC control circuit through MCB, 0 0
LEDs for spring charge, DC Supply healthy, Breaker ON/OFF and TEST/ SERVICE position; 12-Window Annunciator along with Hooter with suitable labels
for WTI/OTI/Buccholz Alarm/Gas alarm/Trip
0 0
(i) Multifunction Meter (Acc.Cl.0.5) with Max. Demand Indication, Modbus communicable for SCADA/BMS integration,
(ii) Digital Ammeter (Acc.Cl.0.5) with selector switches
0 0
Numerical Main Protection Relay, drawout type, generally confirming to IEC60255, having microprocessor based protection scheme for detecting,
indicating and tripping the breaker on critical faults like
(i) Restricted Earth Fault for solidly grounded transformer on Secondary side
(ii) Over-Current & Earth-Fault detection for both Transformer primary and secondary
(iii) Negative sequence faults due to line-to-line or conductor break
(iv) Three-phase under/over-voltage protection
(v) Transformer auxiliary protections
(vi) circuit-breaker-failure alarm,
(vii) tripping-circuit-failures and interpanel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol. The relay shall
be integrated with the feeder, capturing statuses like Breaker On/Off//Test/Service/AC-Fail, Buccholz/OTI/WTI Alarm/Gas pressure/Trip, Line-Current,
Bus-Voltage etc. and display the same locally on back-lit LCD screen as SLD/mimic with power & frequency measurements, remotely on station bus over
IEC61850 platform and locally on LAN over in-built WebHMI without requiring any special software (free or chargeable).
0 0
Master-Trip and Trip-Circuit Supervision shall be provided preferably as part of main-protection relay or otherwise separately, Pluggable Relays for contact
multiplication, anti-pumping, spring-charging indication etc. where applicable shall be provided. The panel shall be complete with FRLS wiring, Terminal
Blocks, cable-ducts, isolation MCBs, led illumination, power-socket and space-heater as per requirement.
0 0
02nos. Bus Coupler Panels, each comprising of 0 0
11kV, 630A, 18.4kA/3-sec Vacuum Circuit Breaker Panel as per IEC-62271, including associated Bus Riser panels 0 0
Numerical Main Protection Relay, drawout type, generally confirming to IEC60255,with microprocessor based protection scheme for detecting, indicating
and tripping the breaker on critical faults like
(i) Synchro-Check and Energizing Check b/w bus-voltages on either side of coupler
(ii) circuit-breaker-failure alarm,
(iii) tripping-circuit-failures and interpanel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol.
The relay shall be integrated with the feeder, capturing status like Breaker On/Off/Spring. Chrgd/Test/Service/AC-Fail, Line-Current, Line-Voltage etc. and
display the same locally on back-lit LCD screen, remotely on IEC61850 platform on ethernet.
0 0
Lockable Local-Remote Switch, Breaker Control Switch (T-N-C), space heater with thermostat, DC & AC control circuit through MCB, 0 0
LEDs for spring charge, DC Supply healthy, Breaker ON/OFF and TEST/ SERVICE position; 0 0
The panel shall be complete with FRLS wiring, Terminal Blocks, cable-ducts, isolation MCBs, led illumination, power-socket and space-heater as per
requirement.
0 0
BusPT Panel, each comprising of 0 0
The BusPT panel shall be installed in the remaining bus-section(s) which does not have any other BusPT connected to it. 0 0
Set of 03nos. Fixed PTs, Single Phase having ratio 11kV/rt3:110V/rt3, 100VA, Class 0.5 with Digital Voltmeter (Acc.Cl.0.5) having selector switches and
protection HV fuses LV MPCB for HT metering upto 12KV
0 0
LEDs for R-Y-B 0 0
The panel shall be complete with FRLS wiring, Terminal Blocks, cable-trays, isolation MCBs, led illumination, power-socket and space-heater with
thermostat as per requirement.
0 0
Busbars 0 0
800 amps TP,12 KV Al. Bus bar with heat shrinkable insulated sleeves in self-supported, insulator-free design to withstand full short circuit currents upto
18.4 kA for three second of suitable size as per panel configuration.
0 0
11 KV MAIN HT PANEL BOARD (LOC: SERVICE YARD) AS ABOVE 1 Nos.
723.00 11 KV HT PANEL BOARD-CHANGEOVER For Terminal (LOC: SERVICE YARD) item793 0 0
Supply, Installation, Testing & Commissioning of indoor type, floor mounted, metal clad, fully-partitioned, totally enclosed 11kV Switch Board VCB panel
as per IS/IEC 62271 as amended up to date and as per specifications, having 3 Nos. VCBs arranged in configuration 02 nos. Incomer, 01 nos. outgoings as
per shall house breakers having totally enclosed, fully interlocked, horizontal isolation, horizontal drawout on floor, vacuum interrupters with trip free
mechanism, motorised charged (230VAC) and auto/manual tripping/closing continuous duty coils (24VDC), ON/OFF indicators, in-built spring charging
handle, hand trip device and mechanical anti-pumping arrangement, suitable for 11 KV, 3-Phase, 50Hz A.C. supply with fault level of 350MVA, associated
CTs/PTs, bus-bars, cable-chambers all enclosed inside arc-proof chambers made from corrosion resistant Galvanized/Aluzinc sheets 2mm thick enclosure,
complete with capability to handle short time current of 18.4kA for 03 sec, Internal Arc 18.4 kA for 01 sec (AFLR as per IEC) also as per site requirement
and as per local electricity authority complete. The panel shall be completed with interconnections, space heaters, earthing, etc. and equipped with
following switchgears and accessories including making capacity earth switch on each feeder, connections suitable for cable upto 2Rx3C x 300sqmm XLPE
cable of 11KV grade (cable entry from bottom). MP based (O/C,SC + E/F) with HT switchgear including suitable protection relays, metering, LED
indications, push buttons, busbars, copper FRLS control wiring with minimum 2.5sq.mm etc. as per the requirement detailed in the tender documents/
SLD etc. complete with self contained, fully interlocked, rack in and rack out mechanism, AL bus bars with PVC heat shrinkable sleeves of 800 Amps
capacity also featured with mechanical ON/OFF indicator as required. The panel shall be completed in all respects including foundation frame, bolting,
grouting and shall be installed with sufficient clearance from side/rear/top as per safety guidelines. (The panel shall be SCADA/BMS compatible with
required no. of NO/NC potential free contacts).
0 0
The panel shall be complete with suitable surge protection device required for the suitable voltage level and withstanding current. The panel shall be
housed with in-built gas suppression system including suitable piping, actuation arrangement, nozzles and associated panels complete as per
specifications and standards.
0 0
02nos. Incomer VCB Panels each comprising of 0 0
11kV, 630A, 18.4kA/3-sec Vacuum Circuit Breaker as per IEC-62271, as prescribed above. 0 0
Set of 03nos. Current Transformers 11kV,250/125/5-5A, Core1: Class 5P10, 15VA, Core2: Class 0.5,15VA 0 0
Set of 03nos. Fixed PTs, Single Phase having ratio 11kV/rt3:110V/rt3, 100VA, Class 0.5 with Digital Voltmeter (Acc.Cl.0.5) having selector switches and
protection HV fuses LV MPCB for HT metering upto 12KV
0 0
Lockable Local-Remote Switch, Breaker Control Switch (T-N-C), space heater with thermostat, DC & AC control circuit through MCB, 0 0
LEDs for RYB, spring charge, DC Supply healthy, Breaker ON/OFF and TEST/ SERVICE position; 6-Window Annunciator along with Hooter 0 0
(i) Multifunction Meter (Acc.Cl.0.5) with Max. Demand Indication, Modbus communicable for SCADA/BMS integration,
(ii) Digital Ammeter (Acc.Cl.0.5)
(iii) Digital KWH meter (Acc.Cl.0.5)
0 0
Numerical Main Protection Relay, drawout type, generally confirming to IEC60255, having microprocessor based protection scheme for detecting,
indicating and tripping the breaker on critical faults like
(i) directional over-current , earth-fault in three phases,
(ii) negative sequence currents due to line-to-line or conductor-break faults,
(iii) residual and three-phase under-voltages/over-voltages,
(iv) Synchro-Check and Energizing Check b/w voltages on bus-side and line-side
(v) circuit-breaker-failure alarm,
(vi) tripping-circuit-failures and interpanel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol.
The relay shall be integrated with the feeder, capturing status like Breaker On/Off/Spring. Chrgd/Test/Service/AC-Fail, Line-Current, Line-Voltage etc. and
display the same locally on back-lit LCD screen, remotely on IEC61850 platform on ethernet.
0 0
Aux. relays like Master-Trip and Trip-Circuit Supervision shall be provided preferably as part of main-protection relay or otherwise separately, Pluggable
Relays for contact multiplication, anti-pumping, spring-charging indication etc. where applicable shall be provided. The panel shall be complete with FRLS
wiring, Terminal Blocks, cable-ducts, isolation MCBs, led illumination, power-socket and space-heater as per requirement.
0 0
01nos. Outgoings, VCB Panel 0 0
11kV, 630A, 18.4kA/3-sec Vacuum Circuit Breaker Panel as per IEC-62271,as prescribed above. 0 0
Set of 03nos. Current Transformers 11kV, 150-80/5-5A, Core1: Class 5P10, 15VA, Core2: Class 0.5, 15VA 0 0
Lockable Local-Remote Switch, Breaker Control Switch (T-N-C), space heater with thermostat, DC & AC control circuit through MCB, 0 0
LEDs for spring charge, DC Supply healthy, Breaker ON/OFF and TEST/ SERVICE position; 6-Window Annunciator along with Hooter with suitable labels
0 0
(i) Multifunction Meter (Acc.Cl.0.5) with Max. Demand Indication, Modbus communicable for SCADA/BMS integration,
(ii) Digital Ammeter (Acc.Cl.0.5)
0 0
Numerical Main Protection Relay, drawout type, generally confirming to IEC60255, having microprocessor based protection scheme for detecting,
indicating and tripping the breaker on critical faults like
(ii) non directional Over-Current & Earth-Fault detection for both Transformer primary and secondary
(iii) Negative sequence faults due to line-to-line or conductor break
(iv) Three-phase under/over-voltage protection
(v) Transformer auxiliary protections
(vi) circuit-breaker-failure alarm,
(vii) tripping-circuit-failures and interpanel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol. The relay shall
be integrated with the feeder, capturing statuses like Breaker On/Off//Test/Service/AC-Fail, Trip, Line-Current, Bus-Voltage etc. and display the same
locally on back-lit LCD screen as SLD/mimic with power & frequency measurements, remotely on station bus over IEC61850 platform and locally on LAN
over in-built WebHMI without requiring any special software (free or chargeable).
0 0
Master-Trip and Trip-Circuit Supervision shall be provided preferably as part of main-protection relay or otherwise separately, Pluggable Relays for contact
multiplication, anti-pumping, spring-charging indication etc. where applicable shall be provided. The panel shall be complete with FRLS wiring, Terminal
Blocks, cable-ducts, isolation MCBs, led illumination, power-socket and space-heater as per requirement.
0 0
Busbars 0 0
800 amps TP,12 KV Al. Bus bar with heat shrinkable insulated sleeves in self-supported, insulator-free design to withstand full short circuit currents upto
18.4kA for three second of suitable size as per panel configuration.
0 0
11 KV HT PANEL BOARD-CHANGEOVER For Terminal (LOC: SERVICE YARD) AS ABOVE 2 Nos.
724.00 11 KV HT PANEL BOARD TERMINAL-3 (LOC: BASEMENT T-3) item794 0 0
Supply, Installation, Testing & Commissioning of indoor type, floor mounted, metal clad, fully-partitioned, totally enclosed 11kV Switch Board VCB panel
as per IS/IEC 62271 as amended up to date and as per specifications, having 8 Nos. VCBs arranged in configuration 02 nos. Incomer, 02 nos. Bus coupler,
04 nos. outgoings as per shall house breakers having totally enclosed, fully interlocked, horizontal isolation, horizontal drawout on floor, vacuum
interrupters with trip free mechanism, motorised charged (230VAC) and auto/manual tripping/closing continuous duty coils (24VDC), ON/OFF indicators,
in-built spring charging handle, hand trip device and mechanical anti-pumping arrangement, suitable for 11 KV, 3-Phase, 50Hz A.C. supply with fault level
of 350MVA, associated CTs/PTs, bus-bars, cable-chambers all enclosed inside arc-proof chambers made from corrosion resistant Galvanized/Aluzinc
sheets 2mm thick enclosure, complete with capability to handle short time current of 18.4kA for 03 sec, Internal Arc 18.4 kA for 01 sec (AFLR as per IEC)
also as per site requirement and as per local electricity authority complete. The panel shall be completed with interconnections, space heaters, earthing,
etc. and equipped with following switchgears and accessories including making capacity earth switch on each feeder, connections suitable for cable upto
2Rx3C x 300sqmm XLPE cable of 11KV grade (cable entry from Top). MP based (O/C,SC + E/F) with HT switchgear including suitable protection relays,
metering, LED indications, push buttons, busbars, copper FRLS control wiring with minimum 2.5sq.mm etc. as per the requirement detailed in the tender
documents/ SLD etc. complete with self contained, fully interlocked, rack in and rack out mechanism, AL bus bars with PVC heat shrinkable sleeves of
800 Amps capacity also featured with mechanical ON/OFF indicator as required. The panel shall be completed in all respects including foundation frame,
bolting, grouting and shall be installed with sufficient clearance from side/rear/top as per safety guidelines.(The panel shall be SCADA/BMS compatible
with required no. of NO/NC potential free contacts).
0 0
The panel shall be complete with suitable surge protection device required for the suitable voltage level and withstanding current. The panel shall be
housed with in-built gas suppression system including suitable piping, actuation arrangement, nozzles and associated panels complete as per
specifications and standards.
0 0
02 nos. Incomer VCB Panels each comprising of 0 0
11kV, 630A, 18.4kA/3-sec Vacuum Circuit Breaker as per IEC-62271, as prescribed above. 0 0
Set of 03nos. Current Transformers 11kV,250/150/5-5A, Core1: Class 5P10, 15VA, Core2: Class 0.5,15VA 0 0
Set of 03nos. Fixed PTs, Single Phase having ratio 11kV/rt3:110V/rt3, 100VA, Class 0.5 with Digital Voltmeter (Acc.Cl.0.5) having selector switches and
protection HV fuses LV MPCB for HT metering upto 12KV
0 0
Lockable Local-Remote Switch, Breaker Control Switch (T-N-C), space heater with thermostat, DC & AC control circuit through MCB, 0 0
LEDs for RYB, spring charge, DC Supply healthy, Breaker ON/OFF and TEST/ SERVICE position; 6-Window Annunciator along with Hooter 0 0
(i) Multifunction Meter (Acc.Cl.0.5) with Max. Demand Indication, Modbus communicable for SCADA/BMS integration,
(ii) Digital Ammeter (Acc.Cl.0.5)
(iii) Digital KWH meter (Acc.Cl.0.5)
0 0
Numerical Main Protection Relay, drawout type, generally confirming to IEC60255, having microprocessor based protection scheme for detecting,
indicating and tripping the breaker on critical faults like
(i) directional over-current , earth-fault in three phases,
(ii) negative sequence currents due to line-to-line or conductor-break faults,
(iii) residual and three-phase under-voltages/over-voltages,
(iv) Synchro-Check and Energizing Check b/w voltages on bus-side and line-side
(v) circuit-breaker-failure alarm,
(vi) tripping-circuit-failures and interpanel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol.
The relay shall be integrated with the feeder, capturing status like Breaker On/Off/Spring. Chrgd/Test/Service/AC-Fail, Line-Current, Line-Voltage etc. and
display the same locally on back-lit LCD screen, remotely on IEC61850 platform on ethernet.
0 0
Aux. relays like Master-Trip and Trip-Circuit Supervision shall be provided preferably as part of main-protection relay or otherwise separately, Pluggable
Relays for contact multiplication, anti-pumping, spring-charging indication etc. where applicable shall be provided. The panel shall be complete with FRLS
wiring, Terminal Blocks, cable-ducts, isolation MCBs, led illumination, power-socket and space-heater as per requirement.
0 0
03nos. Outgoings, 01no. Spares VCB Panel 0 0
11kV, 630A, 18.4kA/3-sec Vacuum Circuit Breaker Panel as per IEC-62271,as prescribed above. 0 0
Set of 03nos. Current Transformers 11kV, 150-80/5-5A, Core1: Class 5P10, 15VA, Core2: Class 0.5, 15VA 0 0
Lockable Local-Remote Switch, Breaker Control Switch (T-N-C), space heater with thermostat, DC & AC control circuit through MCB, 0 0
LEDs for spring charge, DC Supply healthy, Breaker ON/OFF and TEST/ SERVICE position; 12-Window Annunciator along with Hooter with suitable labels
for WTI/ Alarm/
0 0
(i) Multifunction Meter (Acc.Cl.0.5) with Max. Demand Indication, Modbus communicable for SCADA/BMS integration,
(ii) Digital Ammeter (Acc.Cl.0.5) with selector switches
0 0
Numerical Main Protection Relay, drawout type, generally confirming to IEC60255, having microprocessor based protection scheme for detecting,
indicating and tripping the breaker on critical faults like
(i) Restricted Earth Fault for solidly grounded transformer on Secondary side
(ii) Over-Current & Earth-Fault detection for both Transformer primary and secondary
(iii) Negative sequence faults due to line-to-line or conductor break
(iv) Three-phase under/over-voltage protection
(v) Transformer auxiliary protections
(vi) circuit-breaker-failure alarm,
(vii) tripping-circuit-failures and interpanel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol. The relay shall
be integrated with the feeder, capturing statuses like Breaker On/Off//Test/Service/AC-Fail, WTI Alarm/Trip, Line-Current, Bus-Voltage etc. and display the
same locally on back-lit LCD screen as SLD/mimic with power & frequency measurements, remotely on station bus over IEC61850 platform and locally on
LAN over in-built WebHMI without requiring any special software (free or chargeable).
0 0
Master-Trip and Trip-Circuit Supervision shall be provided preferably as part of main-protection relay or otherwise separately, Pluggable Relays for contact
multiplication, anti-pumping, spring-charging indication etc. where applicable shall be provided. The panel shall be complete with FRLS wiring, Terminal
Blocks, cable-ducts, isolation MCBs, led illumination, power-socket and space-heater as per requirement.
0 0
02nos. Bus Coupler Panels, each comprising of 0 0
11kV, 630A, 26.3kA/3-sec Vacuum Circuit Breaker Panel as per IEC-62271, including associated Bus Riser panels 0 0
Numerical Main Protection Relay, drawout type, generally confirming to IEC60255,with microprocessor based protection scheme for detecting, indicating
and tripping the breaker on critical faults like
(i) Synchro-Check and Energizing Check b/w bus-voltages on either side of coupler
(ii) circuit-breaker-failure alarm,
(iii) tripping-circuit-failures and interpanel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol.
The relay shall be integrated with the feeder, capturing status like Breaker On/Off/Spring. Chrgd/Test/Service/AC-Fail, Line-Current, Line-Voltage etc. and
display the same locally on back-lit LCD screen, remotely on IEC61850 platform on ethernet.
0 0
Lockable Local-Remote Switch, Breaker Control Switch (T-N-C), space heater with thermostat, DC & AC control circuit through MCB, 0 0
LEDs for spring charge, DC Supply healthy, Breaker ON/OFF and TEST/ SERVICE position; 0 0
The panel shall be complete with FRLS wiring, Terminal Blocks, cable-ducts, isolation MCBs, led illumination, power-socket and space-heater as per
requirement.
0 0
Bus PT Panel, each comprising of 0 0
The BusPT panel shall be installed in the remaining bus-section(s) which does not have any other BusPT connected to it. 0 0
Set of 03nos. Fixed PTs, Single Phase having ratio 11kV/rt3:110V/rt3, 100VA, Class 0.5 with Digital Voltmeter (Acc.Cl.0.5) having selector switches and
protection HV fuses LV MPCB for HT metering upto 12KV
0 0
LEDs for R-Y-B 0 0
The panel shall be complete with FRLS wiring, Terminal Blocks, cable-trays, isolation MCBs, led illumination, power-socket and space-heater with
thermostat as per requirement.
0 0
Busbars 0 0
800 amps TP,12 KV Al. Bus bar with heat shrinkable insulated sleeves in self-supported, insulator-free design to withstand full short circuit currents upto
26.3 kA for three second of suitable size as per panel configuration.
0 0
11 KV HT PANEL BOARD TERMINAL-3 (LOC: BASEMENT T-3) AS ABOVE 1 Nos.
725.00 11 KV (18.4KA) HT PANEL 1 No. INCOMING/OUTGOING BOARD 18.3KA FOR DG SETS IN DG ROOM item795 0 0
Supply, Installation, Testing & Commissioning of indoor type, floor mounted, metal clad, fully-partitioned, totally enclosed 11kV Switch Board VCB panel
as per IS/IEC 62271 as amended up to date and as per specifications, having 1 Nos. Incoming/Outgoing VCBs arranged & shall house breakers having
totally enclosed, fully interlocked, horizontal isolation, horizontal drawout on floor, vacuum interrupters with trip free mechanism, motorised charged
(230VAC) and auto/manual tripping/closing continuous duty coils (24VDC), ON/OFF indicators, in-built spring charging handle, hand trip device and
mechanical anti-pumping arrangement, suitable for 11 KV, 3-Phase, 50Hz A.C. supply with fault level of 350MVA, associated CTs/PTs, bus-bars, cable-
chambers all enclosed inside arc-proof chambers made from corrosion resistant Galvanized/Aluzinc sheets 2mm thick enclosure, complete with capability
to handle short time current of 18.4kA for 03 sec, Internal Arc 18.4 kA for 01 sec (AFLR as per IEC) also as per site requirement and as per local electricity
authority complete. The panel shall be completed with interconnections, space heaters, earthing, etc. and equipped with following switchgears and
accessories including making capacity earth switch on each feeder, connections suitable for cable upto 1Rx3C x 300sqmm XLPE cable of 11KV grade
(cable entry from Bottom). MP based (O/C,SC + E/F) with HT switchgear including suitable protection relays, metering, LED indications, push buttons,
busbars, copper FRLS control wiring with minimum 2.5sq.mm etc. as per the requirement detailed in the tender documents/ SLD etc. complete with self
contained, fully interlocked, rack in and rack out mechanism, AL bus bars with PVC heat shrinkable sleeves of 800 Amps capacity also featured with
mechanical ON/OFF indicator as required. The panel shall be completed in all respects including foundation frame, bolting, grouting and shall be installed
with sufficient clearance from side/rear/top as per safety guidelines.(The panel shall be SCADA/BMS compatible with required no. of NO/NC potential
free contacts).
0 0
The panel shall be complete with suitable surge protection device required for the suitable voltage level and withstanding current. The panel shall be
housed with in-built gas suppression system including suitable piping, actuation arrangement, nozzles and associated panels complete as per
specifications and standards.
0 0
01 nos. Incomer/Outgoing VCB Panels each comprising of 0 0
11kV, 630A, 18.4kA/3-sec Vacuum Circuit Breaker as per IEC-62271, as prescribed above. 0 0
Set of 03nos. Current Transformers 11kV,100/150/5-5A, Core1: Class 5P10, 15VA, Core2: Class 0.5,15VA 0 0
Set of 03nos. Fixed PTs, Single Phase having ratio 11kV/rt3:110V/rt3, 100VA, Class 0.5 with Digital Voltmeter (Acc.Cl.0.5) having selector switches and
protection HV fuses LV MPCB for HT metering upto 12KV
0 0
Lockable Local-Remote Switch, Breaker Control Switch (T-N-C), space heater with thermostat, DC & AC control circuit through MCB, 0 0
LEDs for RYB, spring charge, DC Supply healthy, Breaker ON/OFF and TEST/ SERVICE position; 6-Window Annunciator along with Hooter 0 0
(ii) Digital Ammeter (Acc.Cl.0.5) 0 0
Numerical Main Protection Relay, drawout type, generally confirming to IEC60255, having microprocessor based protection scheme for detecting,
indicating and tripping the breaker on critical faults like
0 0
(i) directional over-current , earth-fault in three phases, 0 0
(ii) circuit-breaker-failure alarm 0 0
11 KV (18.4KA) HT PANEL 1 No. INCOMING/OUTGOING BOARD 18.3KA FOR DG SETS IN DG ROOM WITH SPECS. SAME AS ABOVE 3 Nos.
726.00 Earth Truck item796
Breaker Truck: The breaker earth trolley shall be fabricated from steel, providing a sturdy vehicle for the circuit breaker and its operating and tripping
mechanism. The contacts shall be made only after the breaker is inserted into service position. Interlocking should prevent contacts from being
disconnected if circuit breaker is tried to be moved from service position. (For 33kV)
2 Nos.
727.00 Earth Truck item797
Breaker Truck: The breaker earth trolley shall be fabricated from steel, providing a sturdy vehicle for the circuit breaker and its operating and tripping
mechanism. The contacts shall be made only after the breaker is inserted into service position. Interlocking should prevent contacts from being
disconnected if circuit breaker is tried to be moved from service position. (For 11kV)
4 Nos.
728.00 Battery & Battery Charger item798
230V, single phase 2 wire AC to 24V DC Batteries charger with semiconductor/IGBT full wave rectifier with auto /manual float cum boost facility
complete with 24V DC, 180 AH sealed maintenance free batteries including one no. distribution board having 63 Amps DP MCCB as incomer and 16 Nos.
20/16A DP MCB's (D.C. duty) as outgoing complete as required and as per technical specifications.
1 Set
729.00 11 KV HT PANEL BOARD - DG SYNC PANEL. (LOC: Service Yard) item799 0 0
Supply, Installation, Testing & Commissioning of indoor type, floor mounted, metal clad, fully-partitioned, totally enclosed 11kV Switch Board VCB panel
as per IS/IEC 62271 as amended up to date and as per specifications, having 13 Nos. VCBs arranged in configuration 06 nos. Incomer, 02 nos. Bus coupler,
05 nos. outgoings as per shall house breakers having totally enclosed, fully interlocked, horizontal isolation, horizontal drawout on floor, vacuum
interrupters with trip free mechanism, motorised charged (230VAC) and auto/manual tripping/closing continuous duty coils (24VDC), ON/OFF indicators,
in-built spring charging handle, hand trip device and mechanical anti-pumping arrangement, suitable for 11 KV, 3-Phase, 50Hz A.C. supply with fault level
of 500MVA, associated CTs/PTs, bus-bars, cable-chambers all enclosed inside arc-proof chambers made from corrosion resistant Galvanized/Aluzinc
sheets 2mm thick enclosure, complete with capability to handle short time current of 26.3kA for 03 sec, Internal Arc 26.3 kA for 01 sec (AFLR as per IEC)
also as per site requirement and as per local electricity authority complete. The panel shall be completed with interconnections, space heaters, earthing,
etc. and equipped with following switchgears and accessories including making capacity earth switch on each feeder, connections suitable for cable upto
3C x 300sqmm XLPE cable of 11KV grade (cable entry from bottom). MP based (O/C + E/F) with HT switchgear including suitable protection relays,
metering, LED indications, push buttons, busbars, copper FRLS control wiring with minimum 2.5sq.mm etc. as per the requirement detailed in the tender
documents/ SLD etc. complete with self contained, fully interlocked, rack in and rack out mechanism, AL bus bars with PVC heat shrinkable sleeves of
800 Amps capacity also featured with mechanical ON/OFF indicator as required. The panel shall be completed in all respects including foundation frame,
bolting, grouting and shall be installed with sufficient clearance from side/rear/top as per safety guidelines. (The panel shall be SCADA/BMS compatible
with required no. of NO/NC potential free contacts)
0 0
The panel shall be complete with suitable surge protection device required for the suitable voltage level and withstanding current. The panel shall be
housed with in-built gas suppression system including suitable piping, actuation arrangement, nozzles and associated panels complete as per
specifications and standards.
0 0
06nos. Incomer VCB Panels each comprising of 0 0
11kV, 630A, 26.3kA/3-sec Vacuum Circuit Breaker as per IEC-62271,as described above. 0 0
Set of 03nos. Current Transformers 11kV, 250-125/5-5, Core1: Class 5P10, 15VA, Core2: Class 0.5, 15VA, PS class 15VA 0 0
Set of 03nos. Fixed PTs, Single Phase having ratio 11kV/rt3:110V/rt3, 100VA, Class 0.5 with Digital Voltmeter (Acc.Cl.0.5) having selector switches and
protection HV fuses LV MPCB for HT metering upto 12KV
0 0
Lockable Local-Remote Switch, Breaker Control Switch (T-N-C), space heater with thermostat, DC & AC control circuit through MCB, 0 0
LEDs for RYB, spring charge, DC Supply healthy, Breaker ON/OFF and TEST/ SERVICE position; 12-Window Annunciator along with Hooter 0 0
(i) Multifunction Meter (Acc.Cl.0.5) with Max. Demand Indication, Modbus communicable for SCADA/BMS integration,
(ii) Digital Ammeter (Acc.Cl.0.5) with selector switches
(iii) Digital KWH meter (Acc.Cl.0.5) with selector switches
0 0
Numerical Main Protection Relay, drawout type, generally confirming to IEC60255, having microprocessor based protection scheme for detecting,
indicating and tripping the breaker on critical faults like
(i) Differential protection (ii) Restricted earth fault relay , Reverse power relay
(iii) Over-Current & Earth-Fault detection for both Transformer primary and secondary
(iv) Negative sequence faults due to line-to-line or conductor break
(v) Three-phase under/over-voltage protection
(vi) Transformer auxiliary protections
(vii) circuit-breaker-failure alarm,
(viii) tripping-circuit-failures and interpanel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol. The relay shall
be integrated with the feeder, capturing statuses like Breaker On/Off//Test/Service/AC-Fail, Line-Current, Bus-Voltage etc. and display the same locally on
back-lit LCD screen as SLD/mimic with power & frequency measurements, remotely on station bus over IEC61850 platform and locally on LAN over in-
built WebHMI without requiring any special software (free or chargeable).
0 0
Master-Trip and Trip-Circuit Supervision shall be provided preferably as part of main-protection relay or otherwise separately, Pluggable Relays for contact
multiplication, anti-pumping, spring-charging indication etc. where applicable shall be provided. The panel shall be complete with FRLS wiring, Terminal
Blocks, cable-ducts, isolation MCBs, led illumination, power-socket and space-heater as per requirement.
0 0
05nos. Outgoing VCB Panels (1 spare), each comprising of 0 0
11kV, 630A, 26.3kA/3-sec Vacuum Circuit Breaker Panel as per IEC-62271, as prescribed above. 0 0
Set of 03nos. Current Transformers 11kV, 250-125/5-5A, Core1: Class 5P10, 15VA, Core2: Class 0.5, 15VA(3 nos.) 0 0
Lockable Local-Remote Switch, Breaker Control Switch (T-N-C), space heater with thermostat, DC & AC control circuit through MCB, 0 0
LEDs for spring charge, DC Supply healthy, Breaker ON/OFF and TEST/ SERVICE position; 06-Window Annunciator along with Hooter 0 0
(i) Multifunction Meter (Acc.Cl.0.5) with Max. Demand Indication, Modbus communicable for SCADA/BMS integration,
(ii) Digital Ammeter (Acc.Cl.0.5) with selector switches
(iii) Digital KWH meter (Acc.Cl.0.5) with selector switches
0 0
Numerical Main Protection Relay, drawout type, generally confirming to IEC60255 with microprocessor based protection scheme for detecting, indicating
and tripping the breaker on critical faults like
(i) non-directional over-current or earth-fault in any of the three phases,
(ii) negative sequence currents due to line-to-line or conductor-break faults,
(iii) circuit-breaker-failure alarm,
(iv) tripping-circuit-failures and interpanel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol.
The relay shall be integrated with the feeder, capturing status like Breaker On/Off/Spring. Chrgd/Test/Service/AC-Fail, Line-Current, Line-Voltage etc. and
display the same locally on back-lit LCD screen, remotely on IEC61850 platform on ethernet.
0 0
Master-Trip and Trip-Circuit Supervision shall be provided preferably as part of main-protection relay or otherwise separately, Pluggable Relays for contact
multiplication, anti-pumping, spring-charging indication etc. where applicable shall be provided. The panel shall be complete with FRLS wiring, Terminal
Blocks, cable-ducts, isolation MCBs, led illumination, power-socket and space-heater as per requirement.
0 0
02nos. Bus Coupler Panels, each comprising of 0 0
11kV, 800A, 26.3kA/3-sec Vacuum Circuit Breaker Panel as per IEC-62271-100, including associated Bus Riser panels 0 0
Set of 03nos. Fixed PTs, Single Phase having ratio 11kV/rt3:110V/rt3, 100VA, Class 0.5 with Digital Voltmeter (Acc.Cl.0.5) having selector switches and
protection HV fuses LV MPCB for HT metering upto 12KV
0 0
Numerical Main Protection Relay, drawout type, generally confirming to IEC60255, having 05PT Inputs with microprocessor based protection scheme for
detecting, indicating and tripping the breaker on critical faults like
(i) Synchro-Check and Energizing Check b/w bus-voltages on either side of coupler
(ii) circuit-breaker-failure alarm,
(iii) tripping-circuit-failures and interpanel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol.
The relay shall be integrated with the feeder, capturing statuses like Breaker On/Off//Test/Service/AC-Fail, Line-Voltage etc. and display the same locally
on back-lit LCD screen as SLD/mimic with voltage & frequency measurements, remotely on station bus over IEC61850 platform and locally on LAN over in-
built WebHMI without requiring any special software (free or chargeable).
0 0
Lockable Local-Remote Switch, Breaker Control Switch (T-N-C), space heater with thermostat, DC & AC control circuit through MCB, 0 0
LEDs for spring charge, DC Supply healthy, Breaker ON/OFF and TEST/ SERVICE position; 0 0
Master-Trip and Trip-Circuit Supervision shall be provided preferably as part of main-protection relay or otherwise separately, Pluggable Relays for contact
multiplication, anti-pumping, spring-charging indication etc. where applicable shall be provided. The panel shall be complete with FRLS wiring, Terminal
Blocks, cable-ducts, isolation MCBs, led illumination, power-socket and space-heater as per requirement.
0 0
01nos. BusPT Panels, each comprising of 0 0
The BusPT panel shall be installed in the remaining bus-section(s) which does not have any other BusPT connected to it. 0 0
Set of 03nos. Fixed PTs, Single Phase having ratio 11kV/rt3:110V/rt3, 100VA, Class 0.5 with Digital Voltmeter (Acc.Cl.0.5) having selector switches and
protection HV fuses LV MPCB for HT metering upto 12KV
0 0
LEDs for R-Y-B 0 0
The panel shall be complete with FRLS wiring, Terminal Blocks, cable-trays, isolation MCBs, led illumination, power-socket and space-heater with
thermostat as per requirement.
0 0
Busbars 0 0
800 Amps, TP, 12KV AL. Bus bar with heat shrinkable insulated sleeves in self-supported, insulator-free design to withstand full short circuit currents upto
26.3 kA for three second of suitable size as per panel configuration
0 0
11 KV HT PANEL BOARD - DG SYNC PANEL. (LOC: Service Yard) AS ABOVE 1 Nos.
730.00 METERING, RELAY & CONTROL PANEL FOR 11 kV DG SYNCHRONIZING PANELS item800 0 0
Supply, installation, testing and commissioning of 11KV relay & remote control panel indoor type for incoming feeder and outgoing feeder. The panel
shall be with back access double door arrangement, dust and vermin proof, IP-43 class protection and fabricated from CRCA sheet steel of 2 mm thick for
frame work and covers, 3 mm thick for gland, plates i/c cleaning & finishing complete with 9 tank process for powder coating in approved shade,,
including internal wiring using 1.1kV FRLS insulated multistrand cable (2.5sqmm for CT/PT circuit, 1.5sqmm for Control circuit), numbered and colour
coded as per IS-5578 having suitable entry for cable consisting of the following:-
0 0
6 No. Incoming feeder for DG Synch. Panel and each incoming comprises of the following : 0 0
Digital multi function meter , accuracy class 0.5 facility with following parameters maximum demand load, Kilo Watt Hour (KWh), kVA, kW, along with
Current, Power factor, Voltage, Frequency and including RS-485 communication port for SCADA/BMS connectivity. .
0 0
Control & Push Button 0 0
Lockable type, Trip/Neutral/Close (TNC) Switch 0 0
Lockable type local/Remote Switch 0 0
Main Protection Relay should have provision of tripping of breaker in case of failure of TNC switch. 0 0
Push buttons for DC fail accept and test 0 0
LED Indicating lamp 0 0
Breaker - On/Off/Trip/Spring Charged 0 0
R/Y/B Phase 0 0
Trip circuit healthy & Trip Circuit fails alarm 0 0
DC Control Supply healthy & fails alarm 0 0
AC Supply Available 0 0
Other items 0 0
Hooter with audible alarm with Bell 0 0
LED Illumination lamp ON / OFF with limit Switch 0 0
Space heater with thermostat / RCBO, 30 mA 0 0
6/16 amps 5 Pin switch socket outlet 0 0
Control terminal as required 0 0
Tripping and Control circuit operating at 24 VDC, Spring charging, space heater, CFL illumination circuit, operating at 230VAC, suitably isolated and
protected via fuses/MCBs
0 0
Excitation Ammeter & Voltmeter 0 0
Temperature scanner 0 0
Multi function numeric relay with RS-485 communication ports for the following: 0 0
Check synchronizing Relay (25) 0 0
Under Voltage relay (27) 0 0
Reverse power relay (32) 0 0
Loss of excitation relay (40) 0 0
Current unbalance (46) 0 0
Thermal over load (49) 0 0
Breaker failure protection (50 BF) 0 0
Voltage restrained instantaneous over current protection (50V) , high set shall be provided on all phases. 0 0
Voltage restrained IDMT over current protection (51V) , low set shall be provided on all phases. 0 0
Ground fault protection Device No.50N, high set shall be provided and Device No.51 N, low set shall be provided. 0 0
Over Voltage Relay (59) 0 0
Under / Over frequency (81) 0 0
Trip Supervision relay (95) 0 0
Numeric generator differential Bias % with dual adjustable slop protection relay (87G) 0 0
Lockout relay (86) 0 0
Engine cranking relay 0 0
Emergency Push Button. 0 0
Control wiring for Synchronizing Module (for Synchronizing System) 0 0
Audio visual annunciation windows with, accept, reset & test, start stop push buttons. 0 0
16 Window Solid state Annunciator for each DG sets 0 0
Set fails to start (only alarm), Over current (breaker trip), Earth Fault (Breaker trip), Excitation Failure (Engine should be stop with breaker trip), Reverse
Power (Breaker trip), Over speed (Breaker will trip with engine stop command), Low Lube Oil pressure (Breaker will trip with engine stop command), High
Water Temperature (Breaker will trip with engine stop command, Over / Under Voltage (Breaker trip), Bearing Temperature high (breaker will trip with
engine stop command), Under / Over Frequency (Breaker trip), Winding Temperature High Breaker with trip with engine stop command), Differential
Fault (Engine / Alternator field shall cut off)
0 0
2 No. Bus Coupler (each comprises of the following :) 0 0
Digital ammeter , accuracy class 0.5 facility with following parameters and including RS-485 communication port for SCADA/BMS connectivity for
monitoring with following measuring parameter:
0 0
Control & Push Button 0 0
Lockable type, Trip/Neutral/Close (TNC) Switch 0 0
Lockable type local/Remote Switch 0 0
Main Protection Relay should have provision of tripping of breaker in case of failure of TNC switch. 0 0
Push buttons for DC fail accept and test 0 0
LED Indicating lamp 0 0
Breaker - On/Off/Trip/Spring Charged 0 0
R/Y/B Phase 0 0
Trip circuit healthy & Trip Circuit fails alarm 0 0
DC Control Supply healthy & fails alarm 0 0
AC Supply Available 0 0
Other items 0 0
Hooter with audible alarm with Bell 0 0
LED Illumination lamp ON / OFF with limit Switch 0 0
Space heater with switch / RCBO, 30 mA 0 0
6/16 amps 5 Pin switch socket outlet 0 0
Control terminal as required 0 0
Tripping and Control circuit operating at 24 VDC, Spring charging, space heater, LED illumination circuit, operating at 230VAC, suitably isolated and
protected via fuses/MCBs
0 0
Lock out relay ( 86) with manual reset facility 0 0
5 Nos. Outgoings (each comprises of the following :) 0 0
Digital ammeter , accuracy class 0.5 facility with following parameters and including RS-485 communication port for SCADA/BMS connectivity for
monitoring with following measuring parameter:
0 0
Control & Push Button 0 0
Lockable type, Trip/Neutral/Close (TNC) Switch 0 0
Lockable type local/Remote Switch 0 0
Main Protection Relay should have provision of tripping of breaker in case of failure of TNC switch. 0 0
Push buttons for DC fail accept and test 0 0
LED Indicating lamp 0 0
Breaker - On/Off/Trip/Spring Charged 0 0
R/Y/B Phase 0 0
Trip circuit healthy & Trip Circuit fails alarm 0 0
DC Control Supply healthy & fails alarm 0 0
AC Supply Available 0 0
Other items 0 0
Hooter with audible alarm with Bell 0 0
LED Illumination lamp ON / OFF with limit Switch 0 0
space heater with switch / RCBO, 30 mA 0 0
6/16 amps 5 Pin switch socket outlet 0 0
Control terminal as required 0 0
Tripping and Control circuit operating at 24 VDC, Spring charging, space heater, LED illumination circuit, operating at 230VAC, suitably isolated and
protected via fuses/MCBs
0 0
Flush-Mounted, Numerical based, 3 Over Current+ 1 Earth Fault Feeder Protection Relay, providing Over Current (Low Set: 10 to 250% and High Set: 20
to 2500%), Earth-Fault (Low Set: 10 to 200% and High Set: 50 to 1250%), Circuit breaker Control, Trip Circuit Supervision, Local HMI and user-
programmable 4DI/6DO for future deployment of interlocking/changeover scheme. Relay should be communicable on MODBUS protocol. 1 Set
0 0
Lock out relay ( 86) with manual reset facility 0 0
6 window annunciation for Audio visual with including Accept, Test & reset PB’s for Over current protection & earth fault trip. 0 0
METERING, RELAY & CONTROL PANEL FOR 11 kV DG SYNCHRONIZING PANELS AS ABOVE 1 Nos.
731.00 Neutral Isolation Panel for 11 kV DG sets: item801
6 No. Neutral Isolating Switch for I/c & 3 No. Bus Section
Each comprising of following :
1 No. 400 amps single Pole 11 KV vacuum contactor for neutral isolation
One set of Al. bus bars
On/Off indicating lamps including all accessories
Auto/Manual switch
NIS Panel described as above complete as per specification
1 Nos.
732.00 Neutral Grounding Panel for DG Set comprising of the following: item802
The register element shall be made of un breakable corrosion proof. Punched stainless steel grid of Ferro chrome aluminium alloy. The resistor shall be
suitable for the DG sets as required and for the 50 Amps neutral to earth current with temperature rise not exceeding 760 deg. C for 10 sec. The
resistance element shall be supported on suitable insulating base housed in 2 mm thick galvanized sheet steel self-supporting, free standing cubical with
louvers on sides. The unit shall be complete with connection, terminals glands plates etc. The register element shall be made of un breakable corrosion
proof. Punched stainless steel grid of Ferro chrome aluminium alloy.
NGR Panel described as above complete as per specification
6 Nos.
733.00 Neutral Grounding Panel (NGR) for 33/11 kV, 6.3 MVA TR Set comprising of the following: item803
The register element shall be made of un breakable corrosion proof. Punched stainless steel grid of Ferro chrome aluminium alloy. The resistor shall be
suitable for the Transformers as required and for the 50 Amps neutral to earth current with temperature rise not exceeding 760 deg. C for 10 sec. The
resistance element shall be supported on suitable insulating base housed in 2 mm thick galvanized sheet steel self-supporting, free standing cubical with
louvers on sides. The unit shall be complete with connection, terminals glands plates etc. The register element shall be made of un breakable corrosion
proof. Punched stainless steel grid of Ferro chrome aluminium alloy.
NGR Panel described as above complete as per specification
3 Nos.
B TRANSFORMERS 0 0
734.00 OIL TYPE OUTDOOR TYPE TRANSFORMER (Location Service Yard) item804 0 0
Supply, Installation, Testing & Commissioning of 6.3 MVA 3 phase, 33KV/ 11 kV outdoor, ester oil filled type Power Transformer, Dyn 11 vector group
connection, having impedance as per IS ,Transformer winding & Insulation : CRGO type Prime grade core, 99.9% pure copper winding and neutral
brought out for earthing/NGR, paper insulated Insulation & cooling : Class E insulation(or as per manufacturer i.e. thermal upgraded paper), Oil natural,
Air Natural, (K/ONAN) type cooling. Suitable for continuously rated for full load, temperature rise not exceeding 55 deg C by thermometer in oil or 65
deg C by resistance. ON load tap changer on HT side with 1.25% step each, range (–) 15% and (+) 5% along with RTCC Panel. Primary side cable
termination box shall be suitable for 33 KV, 3C X 300 Sqmm XLPE cable and 11 kV side terminal box shall be suitable for termination of 11 kV, 2 x 3C x 300
sq.mm XLPE AL. cables. Losses of the transformers shall be as per CBIP as well as loading as per IS 6600 and as per best industry engineering standards.
0 0
i. The transformer shall be supplied with following Fitting & Accessories: 0 0
All standard fitting viz Humidistat for Alarm and Trip 0 0
Transformer Oil Temperature Alarm & Tripping 0 0
Winding temperature relay unit with Alarm and trip 0 0
Oil Level Low Alarm with trip 0 0
Electronic temperature controlled with RTD. 0 0
Gas Pressure Relays 0 0
OLTC Oil Surge Relay 0 0
3 No. 1 phase, 30 kV, 10 kA discharge current, class-II Surge arresting device for protection against lightning including Structural support for mounting
lightning arrestor on the body above HT bushing.
0 0
Buchholz relay of double float type with high gas pressure alarm & trip suitable for 24 volts DC supply. With wiring upto marshalling Box & RTCC Panel
0 0
1 No. 600/5A, 5P10,10 VA, Protection class, CT after Neutral trifurcation point for backup earth fault protection (51S). 0 0
Outdoor type Marshalling box with RS-485 communication port for BMS integration to monitor all transformer parameters or having 4 No. potential free
contact for alarm, trip & annunciation (one for BMS and one for control system).
0 0
The transformers shall have bi-directional rollers, winding temperature indicator, oil temperature indicator and Buchholz relay with wiring up to the
marshalling box and RTCC Panel complete. The transformers shall have first filling of oil, weather proof HT cable box. The transformer shall have suitable
disconnecting chamber at the ends with min 8mm thick non-magnetic gland plate, including M. S. channel and suitable size foundation complete with
earth terminals / lifting lugs and other standard accessories as required, as per relevant IS to successfully test & commission the Power Transformer as
described above and technical specification.
0 0
OIL TYPE OUTDOOR TYPE TRANSFORMER ( Location Service Yard) AS ABOVE 3 Nos.
735.00 DRY TYPE INDOOR TYPE TRANSFORMER (Location- T3 Basement) item805
Supply, Installation, Testing & Commissioning of Cast resin Dry type 2500 kVA, 11/0.433 kV 3 Phase, 50Hz, Dyn 11 vector group copper wound class F
insulation or higher, having impedance as per IS, associated with winding temperature indicator / controller temperature detector indoor type
Transformer with impedance as per IS, The transformer shall be provided with +10% to -10% in steps of 2.5 % each Off load tap changer on HT side,
having cable end boxes on HV side suitable for 3 x 300 sq.mm. XLPE cable of 11kV grade and 4000 Amp. bus trunking arrangement of LV side with neutral
brought out separately , supplying and grouting of suitable MS channels and suitable size foundation with all accessories for mounting arrangement and
confirming to IS 2026 & 11171 : 1985 & as per specification attached complete in all respects as required at site. (Location Basement) Losses of the
transformers shall be as per ECBC and as well as equivalent BEE star rated amended upto date.
The transformers shall have bi-directional rollers, winding temperature indicator with wiring up to the marshalling box complete. . The transformer shall
have 8mm thick non-magnetic gland plate, including M. S. channel and suitable size foundation complete with earth terminals / lifting lugs and other
standard accessories as required, as per relevant IS to successfully test & commission the transformer as described above and technical specification
DRY TYPE INDOOR TYPE TRANSFORMER (Location- T3 Basement) AS ABOVE
3 Nos.
736.00 OIL TYPE OUTOOR TYPE TRANSFORMER (Location- Service Yard) item806 0 0
Supply, installation assembling, transporting, Loading, testing and commissioning of Outdoor oil type 2000 kVA 11/0.433 KV, 3 Phase, 50Hz, Dyn11 vector
group, BEE star rated, copper wound, class A or higher insulation level, associated with Oil and winding temperature indicator/ controller actuated by
means of resistance temperature detector embedded in LV windings Associated buccholz protection arrangement, Oil conservator as per IS 2026 and
losses as per IS 1180 Level-2, Outdoor type transformer with approximately 6.25% impedance maximum allowable losses as per ECBC updation, tappings
for off load operation on HV side in steps of -10 to 10 % in steps of 2.5 %.The transformer shall be provided with winding temperature alarm & trip
protection, having cable end boxes on HV side suitable for 3cx 300 Sqmm XLPE cable of 11KV grade and arrangement on LV side suitable for 3200A
sandwiched type bus duct with neutral brought out separately and including all control wiring as per specification attached complete in all respects as
required at site.) (Location services yard).
0 0
i. The transformer shall be supplied with following Fitting & Accessories: 0 0
All standard fitting viz Humidistat for Alarm and Trip 0 0
Transformer Oil Temperature Alarm & Tripping 0 0
Winding temperature relay unit with Alarm and trip 0 0
Oil Level Low Alarm with trip 0 0
Electronic temperature controlled with RTD. 0 0
Gas Pressure Relays 0 0
Buchholz relay of double float type with high gas pressure alarm & trip suitable for 24 volts DC supply. With wiring upto marshalling Box
0 0
1 No. 150/5A, 5P10,10 VA, Protection class, CT after Neutral trifurcation point for backup, Restricted earth fault protection(51S). 0 0
Outdoor type Marshalling box with RS-485 communication port for SCADA/BMS integration to monitor all transformer parameters or having 2 No.
potential free contact for alarm, trip & annunciation (one for BMS and one for control system).
0 0
The transformers shall have bi-directional rollers, winding temperature indicator, oil temperature indicator and Buchholz relay with wiring up to the
marshalling box complete. The transformers shall have first filling of oil, weather proof HT cable box. The transformer shall have suitable disconnecting
chamber at the ends with min 8mm thick non-magnetic gland plate , including M. S. channel and suitable size foundation complete with earth terminals
/ lifting lugs and other standard accessories as required, as per relevant IS to successfully test & commission the transformer as described above and
technical specification
0 0
OIL TYPE OUTOOR TYPE TRANSFORMER (Location- Service Yard) AS ABOVE 3 Nos.
C HSD STORAGE SYSTEM 0 0
737.00 HSD TANK item807
Design, Supply, unloading, placement, Testing & Commissioning of 20 KL capacity HSD underground storage tank (Mild Steel horizontal cylindrical) with
MS shell made out of 6mm thick and end plate 10mm thick suitable for under ground application complete with provision for filling, delivery and vent
pipe, Dip Gauge, Float & Board Type Level Indicator, Man Hole and bucket filter including all accessories etc. as per IS 10987, Tar Epoxy anti rust coating
on the entire outer surface of the tank including excavation, making suitable civil structure & filling of sand etc. complete as required. Tank shall be tested
at works under hydrostatic pressure of 5 PSI before being painted with two coats of Red Oxide primer as required as per specifications and obtaining all
the required statutory approvals including from Chief Explosive Authority.
2 Set
738.00 Supply, erection, testing & commissioning of Float & Board Type Level Indicator with all accessories etc. complete as required. item808 2 Nos.
739.00 Supply, installation, testing & commissioning of Flame Proof positive displacement type HSD Supply Gear pump with flameproof electric motor duly item809
approved by CCE. HSD pump set suitable for operation on 415V, 50Hz AC supply having capacity of 50 lpm @ 20 mtr head with manufacturers
recommended HP/ KW capacity with flameproof electric motor, coupling, coupling guard, companion flange, MS base frame, foundation, foundation
bolts, nut-bolts with flame proof emergency push buttons etc. including earthing complete as required.
2 Set
740.00 Supply, installation, testing and commissioning of emergency MS epoxy box containing isolation valve for fuel line (65 NB plug valve) and also containing item810
remote switch for disabling operation of the fuel oil pump outside. The box shall have breakable glass cover with pad lock arrangement. The box size
shall be 200 x 400 x 150 mm deep. The cost shall be inclusive of isolation valve complete including providing & fixing of flame proof 2 set of ON/OFF
push button station.
2 Set
741.00 Supply, installation, testing & commissioning of Calibrated HSD buffer/ service tank, rectangular MS (IS:226) construction with 990 liters capacity item811
complete with flanged inlet & outlet, overflow, drain, vent, mechanical level indicator, 450mm dia Access hole on top with cover, flame arrestor. Tank will
be made out of 3mm MS sheet and will be provided with structural support to keep tank base at (Approx. 1500mm) above FFL with access ladder
arrangement, painting etc. complete as required as per the system requirement.
1 Set
742.00 Supplying, installation, testing & commissioning of MS pipes of heavy class ERW piping (Class-C) conforming to IS 1239 of following sizes and materials item812
cut to required lengths and installed with necessary bends, supports and clamps, anti-vibration mounting, etc. but excluding valves, strainers and gauges
etc. adequately supported on rigid supports/ concealed on floor, painting with two coats of synthetic enamel paint after primer coat etc. complete as
required.
0 0
742.01 80 mm dia item813 20 M
742.02 65 mm dia item814 60 M
742.03 50 mm dia item815 120 M
742.04 40 mm dia item816 40 M
742.05 25 mm dia item817 80 M
743.00 Supply, erection, testing & commissioning of underground piping MS pipes of heavy class ERW piping (Class-C) conforming to IS 1239 of following sizes item818
and materials cut to required lengths and installed with necessary bends, supports and clamps, including anti rust, corrosion proof 4mm thick tape
wrapping, complete in all respect including digging & back filling if required etc. complete.
0 0
743.01 80 NB App. item819 20 M
743.02 65 NB App. item820 20 M
743.03 50 NB App. item821 20 M
VALVES, STRAINERS & Pressure Gauge, Flow meter 0 0
744.00 Supply , installation, testing & commissioning of following sizes of Ball Valve of CS Ball Valve Flanged End 150Lbs, Fire Safe antistic, Teflon sealing, with item822
matching flanges, G.I. nuts-bolts & gaskets etc. complete as required.
0 0
744.01 80 mm dia item823 4 Nos.
744.02 65 mm dia item824 4 Nos.
744.03 50 mm dia item825 8 Nos.
744.04 40 mm dia item826 2 Nos.
744.05 25 mm dia item827 20 Nos.
745.00 Providing, Fixing, Testing and Commissioning of Non - Return Valve with Dual Plate of C I body, SS plates, flanged ends & PN 16 pressure rating for HSD item828
system complete etc. as required.
0 0
745.01 65 mm dia item829 2 Nos.
745.02 50 mm dia item830 2 Nos.
746.00 Providing, Fixing, Testing and Commissioning Foot Valve of 65mm dia, CI body, flanged ends with required accessories etc. complete as required. item831
2 Set
747.00 Providing, Fixing, Testing and Commissioning of HSD Oil Pot-Strainer, CI body, SS strainer, flanged ends etc. complete as required. item832 0 0
747.01 80 mm dia item833 1 Nos.
747.02 65 mm dia item834 2 Nos.
747.03 25 mm dia item835 1 Nos.
748.00 Providing, Fixing, Testing and Commissioning of dial type SS construction glycerine filled Pressure gauge (0 - 07 kg/cm2 range, dial size 100 mm) with item836
isolating valve and accessories etc. complete as required.
2 Nos.
749.00 Providing, Fixing, Testing and Commissioning of HSD Oil Flow Meter of CI body, flanged ends with Totalizer etc. complete as required. item837 0 0
749.01 80 mm dia item838 1 Nos.
749.02 50 mm dia item839 1 Nos.
749.03 25 mm dia item840 1 Nos.
750.00 Providing and Fixing of 80mm dia GM collection assembly fitted with lockable brass cap suitable for local oil tanker including necessary supports, Flexible item841
Hose Pipe (Standard Length of 3.75Mtr) etc. complete as required.
1 Set
751.00 Providing & fixing level indicators, controllers for UG oil storage tanks, including wiring, cabling, probes with all other accessories ready for working item842
complete as required. Level indication shall be compatible for BMS system. Complete interface, logic controls for two UGT HSD storage tanks, one Buffer
tank & six day oil tanks complete. Providing and fixing flame proof level controllers (suitable for upper ,medium and lower stages) for day oil storage
tanks, buffer tank, UG tanks, solenoid valves, automation controls, including wiring, copper FRLS cabling, probes with all other accessories ready for
automatic operation of fuel oil pump/s complete as system requirement.
1 Job
752.00 Providing & fixing pressure switch online to start/ stop the pump at set pressure complete with all associated work. item843 1 Set
753.00 Providing, Fixing of NO SMOKING / Danger sign boards of size 300mm x 250mm made of 2mm thick MS Sheet including painting / sign writing etc. item844
complete as required
4 Set
754.00 Pressure testing to 150 P.S.I. and flushing HSD oil pipe, manifold and pressure gauge with nitrogen before commissioning etc. as required by Engineer in item845
charge.
1 Job
755.00 Providing, Fixing, Testing and Commissioning of Foot Valve, angle check valves with required accessories for HSD tanks etc. complete as required. item846
0 0
755.01 65 mm dia (foot valve) item847 2 Nos.
755.02 65 mm dia (angle check valve) item848 2 Nos.
756.00 Statutory fees towards obtaining statutory approval license, NOC, etc. for 2 no. 20 KL U.G fuel tank & for complete fuel pipe line scheme from concerned item849
local Authority/ departments shall be born by the contractor.
1 Job
D DG SETS & EQUIPMENTS 0 0
757.00 Supplying, loading, testing of Diesel Generating set having Prime Power Rating of 2000 KVA, without acoustic 11000 volts at 1500 RPM, 0.8 lagging item850
power factor suitable for 50 HZ, 3 phase system and as per Latest amendments of MOEF and CPCB. The DG sets shall be suitable for being overloaded
upto 10% of the rated capacity for 1 hour in every 12 hours and consisting of the followings: The DG set shall be suitable for above 0.85 loading factor
with net output shall be 2000kVA as per site conditions.
0 0
A. DIESEL ENGINE: 0 0
Diesel engine 4 stroke water cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 50 Degree C, 50%RH & at 1000
MSL and conforming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine
will be fitted complete with all the required accessories
0 0
Type: Multi-cylinder water cooled with heat exchanger/ cooling tower, Turbo charged with charge air cooling. 0 0
Fuel injection :As per manufacturer 0 0
Engine Starting : Battery starting. 0 0
Starting position : Universal. Auto/Manual 0 0
The Engines shall include:
• Flywheel with guard.
• Flexible connection.
• Bellow / expansion joints
• Air cleaner
• Blower fan
• Electronic governor with electronic fuel injection system
• Fuel and lube oil filters and pumps
• Day Fuel tank with visual level indicators etc.
• Silencer as per latest amendments of MOEF/CPCB
• Safety controls
• Instrument panel
• Exhaust piping to let out the exhaust at mandatory height above the canopy including support arrangement and insulation with cladding inside the
canopy etc.
0 0
B. ALTERNATOR; 0 0
Synchronous alternator rated at 2000 KVA, 11000 volts at 1500 RPM, 3 phase 50 HZ, AC supply with 0.8 lagging power factor at 50 Degree C, 50% RH &
at 1000 Meter MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self excited & self-regulated through AVR conforming to
IS:4722/BS 2613 suitable for tropical condition and with class-H insulation.
0 0
Type : Brushless. 0 0
Actual Power 2000 KVA at 50 deg C. 0 0
Frequency : 50 Cycles/sec. 0 0
Supply system :3 phases & neutral 0 0
Connection : Star. 0 0
Rated rpm. : 1500 rpm. 0 0
Casing protection : As per IP-23 0 0
Insulation : Class `H/F'. 0 0
Power factor : 0.8. 0 0
Controller : Type Woodward/EMCP/DEIF for synch. operations 0 0
C. ACCESSORIES: 0 0
The Diesel Engine shall be equipped with minimum following/ as indicated in the specifications, devices/ accessories built-in type including all standard
fittings.
0 0
Fuel supply pump with manual venting pump. 0 0
Turbo charger with air filter (dry/oil bath type) and damper. 0 0
Charge air cooler. 0 0
Suction fuel filter 0 0
Lube oil filter. 0 0
Hour meter and RPM indicator. 0 0
Battery Starting Mechanism. 0 0
Instrument/Indication panel complete with the followings; 0 0
a) Starting Switch with key. 0 0
b) Lub. Oil Temp. gauge. 0 0
c) Lub. Oil pressure gauge. 0 0
d) Water Temp. gauge. 0 0
Control devices for safety and monitoring along with indicators. 0 0
Common base/foundation frame. 0 0
Automatic voltage regulator (AVR). 0 0
Daily service fuel tank of 990 liters capacity(as per manufacturers) fabricated out of CRC 4 mm thick MS sheet complete with all standard accessories and
fuel piping between fuel tank and diesel engine with MS Class C pipe of suitable dia. complete with valves, level indication, flow switch & twin fuel filters
with fuel injectors with potential free contacts for giving signal to existing BMS/Digital system and accessories as required as per specifications.
0 0
Anti vibration pads 0 0
12/24V DC Starting system comprising of starter motors: Voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries
(-nos. x, --Amp. Hour capacity maintenance free as per manufacturer standards ) for minimum 6 no. consecutive starts as required as per specifications.
0 0
The cost of initial charge of lubricants, coolant etc. 0 0
Dry exhaust manifold of suitable dia, welded blank MS C Class pipe confirming to IS:3589 cut to required lengths (max. 2 mtrs) and installed with
necessary bends, supports and clamps, anti-vibration mountings, insulation of exhaust system with mineral wool/Rockwool, 50mm thick wire mesh and
aluminium cladding etc. Flexible stainless steel below as required as per specifications with critical grade type exhaust silencer.
0 0
The DG sets shall include the cost of all accessories, fittings, protections, instruments, safety controls, alarms, indications etc. complete as per
specifications, as required
0 0
Diesel Generating set (2000 KVA) as described above. 6 Set
758.00 Providing and fixing in position mild steel exhaust pipe complete with fittings, supports (angels & channels), cutting, bending, welding, 75 mm thick 96 item851
kg/ cu.m density, mineral wool or equal insulation covered with 24 SWG. Aluminium sheet cladding etc. complete as required & approved by the
Engineer Incharge.
0 0
758.01 450 mm dia "5.2mm thick" item852 300 M
758.02 250 mm dia "5.2mm thick" item853 50 M
759.00 Providing and fixing in position following size of heavy duty stainless steel flanged expansion bellows with G.I. nut bolt washers for DG fume piping item854
complete with GI nut bolt washers etc. complete as required.
0 0
759.01 450 mm dia item855 12 Set
760.00 Providing & fixing for MS support structure for exhaust fume pipes from DG Sets (Exhaust pipe to be measured and paid for separately) along horizontal item856
and vertical runs upto the height (as per CPCB norms) including cutting, welding etc. and applying two coats of red oxide and two coats of synthetic
enamelled paint of colour and shade as directed by consultant. The design of the support structure shall be done by the contractor and shall be as per
CPCB norms approved , also to get the approval from the client/ consultant before execution etc. as required.
25000 KG
761.00 Supplying, fixing acoustic lining on ceiling of DG Set rooms with 100 mm thick, density 75 kg/cu.m resin bonded glass fiber insulation friction fixed in item857
610mm X 610 mm frame work made of 25x100x25 mm made out of 0.6mm thick GI sheet U shaped channel and covered with reinforced fiber glass
tissue and finished with 0.80 mm perforated aluminium sheet etc. complete as required and as per specifications.( Insertion loss shall be achived as per
CPCB , CPCB-2 guidelines amended up to date).
680 Sqm
762.00 Supplying, fixing 2.0 mm thick MS sheet with suitable frame work , clamps fixed on wall / sides with openable nuts bolts with acoustic lining on this item858
frame work with 100 mm thick, density 75 kg/cu.m resin bonded glass fiber insulation friction fixed in 610mm X 610 mm frame work made of 25X100X25
mm made out of 0.6mm thick GI sheet U shaped channel and covered with reinforced fiber glass tissue and finished with 0.80 mm perforated aluminium
sheet etc. complete as required and as per specifications.( Insertion loss shall be achived as per CPCB , CPCB-2 guidelines amended up to date).
700 Sqm
E DG COOLING TOWERS, PUMPS & ACCESSORIES 0 0
763.00 DG COOLING TOWER item859
Supply, installing, testing & commissioning of FRP induced draft cooling tower for DG sets. The cooling tower shall be complete with basin, casing,
distribution system, filling, louvers, HDP supports, fan, motor, float valve, quick fill and makeup and drain connections, foundations / structures /
fasteners GI ladder etc. as required. Motor shall be TEFC weather proof and suitable for 415 ±10% volts, 50 cycles, 3 phase power supply isolator at
cooling tower shall be provided in weather proof (IP-55) panel. Quoted price to include cost of thermometer (dia type)at inlet and outlet of cooling
tower.
Cooling Tower suitable for 2000 KVA DG sets having flow rate @ 20degF Delta T and 84 deg F WB Temperature. Cooling Tower water outlet temperature
shall be 90degF and inlet temperature of water to the Cooling Tower shall be 110degF. Quantity indicated includes one no. standby.
Note : Maximum amplitude of vibration permitted should be 3 microns at 6” away from the point of contact.
6 Set
764.00 COOLING WATER PUMPS item860
Supply, installing, testing & commissioning of Monobloc centrifugal pumps, having factory fitted mechanical seal mounted on a common base with
electric motor for circulation of Engine cooling water between engine and cooling tower. The pump motor shall be suitable for 415±10% volts, 50 cycles,
3 phase power supply having efficiency class IE3. The quoted price shall include cost of vibration isolation pads at each cooling tower water pump
performance characteristics shall be as follows:
Water Flow Rate : 1760 LPM
Pump Head : 25 M
Cooling Tower Pumps as described above including 1 No standby.
6 Nos.
765.00 CONDENSING WATER PIPING item861
Providing and fixing in position the following MS class ‘C’ pipes cut to required lengths and installed with all welded joints. Providing and fixing in position
the necessary fittings like expansion bellow, elbows, tees and reducers, sockets, supports and including all accessories complete as required
0 0
765.01 400 mm dia MS pipes item862 202 M
765.02 250 mm dia MS pipes item863 33 M
765.03 200 mm dia MS pipes item864 95 M
765.04 150 mm dia MS pipes item865 5 M
765.05 100 mm dia MS pipes item866 5 M
765.06 80 mm dia MS pipes item867 45 M
765.07 50 mm dia MS pipes item868 220 M
766.00 Providing and fixing in position the following butterfly valves : item869 0 0
766.01 450 mm dia MS Valves. item870 3 Nos.
766.02 250 mm dia MS Valves. item871 1 Nos.
766.03 200 mm dia MS Valves. item872 30 Nos.
766.04 150 mm dia MS Valves. item873 1 Nos.
766.05 100 mm dia MS valves item874 1 Nos.
766.06 50 mm dia MS valves item875 6 Nos.
767.00 Providing and fixing in position the following check valves : item876 0 0
767.01 200 mm dia valves item877 6 Nos.
767.02 100 mm dia valves item878 1 Nos.
768.00 Providing and fixing in position the following balancing valves item879 0 0
768.01 200 mm dia MS Valves. item880 12 Nos.
768.02 100 mm dia MS valves. item881 1 Nos.
769.00 Providing and fixing in position following ‘Y’ strainer : item882 0 0
769.01 200 mm dia strainers item883 6 Nos.
769.02 100 mm dia strainers. item884 1 Nos.
770.00 Supporting and fixing in position following pot strainer item885 0 0
770.01 450 mm dia item886 1 Nos.
770.02 150 mm dia item887 1 Nos.
771.00 Providing and fixing in position following ball valves item888
50 mm dia
12 Nos.
772.00 Providing and fixing in position the industrial type pressure gauges with gun metal valves. item889 24 Nos.
773.00 Providing and fixing in position the mercury-in- glass industrial type thermometers. item890 12 Nos.
774.00 Providing and fixing in position flexible connections of suitable pressure rating to be installed at Heat Exchanger, pump suction and discharge. item891
200 mm dia
24 Nos.
F PROTECTIVE EARTHING 0 0
Earthmat 0 0
775.00 Supply, laying, testing and commissioning of 50 mm dia GI rod for earth mat (at 700mm or deeper or as per the final approved design as per the site item892
condition) as per specifications including lap (of not less than 150mm) & cross weld joints and providing bitumen coat at every joint as required. Risers
from earth mat to be brought out as per approved drawings and specifications. (Cost of risers not included in this item).
500 M
776.00 Supply, laying, testing and commissioning of 30 mm dia GI rod, laying of vertical earth electrodes 3 m deep from earth mat including weld joints with item893
earth mat as per approved drawings and specifications. The weld joints to be provided with bitumen coats.
32 M
777.00 Supply and creating of advance maintenance free Chemical Gel Earthing of Dual Pipe Technology (GI) of 3mtr long 50mm dia of outer shell (MS) with the item894
25mm dia of inner shell (MS) of 80-100 microns galvanized earth electrode filled with highly conducting metallic compounds with the permanent
sealing’s at both the ends with the lead terminal of 32x10mm size at the top along with 50 Kgs of chemical mixture of Resistance Lowering Grounding
Minerals. The loss on ignition by mass of the chemical compound shall be less than 20%. The chemical compound should be tested and certified by any
International accredited and BIS (Bureau of Indian Standards) accredited laboratory. The earth electrode shall be duly tested & certified by CPRI (Central
Power Research Institute), Govt of India. The chemical earth electrode manufacturer shall be an ISO 9001:2008 & ISO 14001:2004 certified organization.
The Earth pit should be covered with heavy duty polyplastic weather proof chamber etc. as required & approved by the Engineer In charge.
2 Nos.
778.00 Supply and creating of advance maintenance free Chemical Gel Earthing of Dual Pipe Technology (GI) of 3mtr long 80mm dia of outer shell (MS) with the item895
50mm dia of inner shell (MS) of 80-100 microns galvanized earth electrode filled with highly conducting metallic compounds with the permanent sealings
at both the ends with the lead terminal of 50 x 10mm size at the top along with 50 Kgs of chemical mixture of Resistance Lowering Grounding Minerals.
The loss on ignition by mass of the chemical compound shall be less than 20%. The chemical compound should be tested and certified by any
International accredited and BIS (Bureau of Indian Standards) accredited laboratory. The earth electrode shall be duly tested & certified by CPRI (Central
Power Research Institute), Govt of India. The chemical earth electrode manufacturer shall be an ISO 9001: 2008 & ISO 14001: 2004 certified organization.
The Earth pit should be covered with heavy duty polyplastic weather proof chamber etc. as required & approved by the Engineer In charge.
50 Nos.
779.00 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking item896
arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2 Nos.
780.00 Supply and fixing of following Cu wire including all necessary fixing accessories and effecting connections, jointing with brazing etc. complete as required item897
& approved by the Engineer Incharge.
0 0
780.01 1 x 10 Sq.mm PVC insulated copper flexible cable item898 120 M
780.02 1 x 35 Sq.mm PVC insulated copper flexible cable item899 190 M
780.03 1 x 50 Sq.mm PVC insulated copper flexible cable item900 280 M
781.00 Supply and laying, Testing and commissioning of copper/GI Strips/wire for interconnecting the earthing stations ,panels, DBs etc. of the following sizes in item901
built up trenches /surface/wall/ground complete with holes & fixing, jointing / terminating accessories as per specifications & drawing as required.
(Quantity shall be paid as per the actual measurement as executed, however direct measurement shall not exceed the quantity indicated in drawing
approved)
Note-1: In case of non-availability of any of the sizes mentioned above, next higher size available in market shall be provided at the same rate.
Note-2: No additional payment will be made for providing Main Earth Terminals (made out of GI/Cu strips from within the above sizes). The METs will
required to be fixed on walls as required and will be required to be provided with 12/16/20mm holes for connections of individual equipments including
of other contractors'.
0 0
781.01 75mmx 10mm G.I. strip on surface or in recess item902 1100 M
781.02 50mmx 6mm Copper strip on surface or in recess item903 670 M
781.03 50mmx 6mm G.I. strip on surface or in recess item904 5400 M
781.04 32mmx 5mm G.I. strip on surface or in recess item905 2440 M
781.05 25mmx 5 mm GI strip on surface or in recess item906 1660 M
781.06 6 SWG G.I wire on surface or in recess item907 2580 M
G H.T. CABLE LAYING & TERMINATIONS 0 0
782.00 Supplying of the following sizes of 33/11KV KV Alum. (E), Armoured XLPE HT power cable as per IS7098(part-2)-1985 amended up-to-date, as per item908
specifications.
0 0
782.01 33 KV (E), 3C x 300 Sq. mm XLPE Aluminium Armoured cable item909 3053 M
782.02 11 KV (E), 3C x 300 Sq. mm XLPE Aluminium Armoured cable item910 2353 M
782.03 11 KV (E), 3C x 240 Sq. mm XLPE Aluminium Armoured cable item911 144 M
783.00 Laying of one number XLPE power cable of 33 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and item912
refilling the trench etc. as required.
Above 120 sq. mm and upto 400 sq. mm
70 M
784.00 Laying of one number XLPE power cable of 33 kV grade of following size in the existing RCC/ HUME/ METAL/ Cable tray pipe as required. item913
Above 120 sq. mm and upto 400 sq. mm
2983 M
785.00 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of following size direct in ground including excavation, sand item914
cushioning, protective covering and refilling the trench etc. as required.
Above 120 sq. mm and upto 400 sq. mm
70 M
786.00 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of following size in the existing RCC/ HUME/ METAL/ Cable Tray item915
pipe as required.
Above 120 sq. mm and upto 400 sq. mm
2427 M
787.00 supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following item916
size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required.
300 sq. mm
18 Set
788.00 Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following item917
size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required.
300 sq. mm
6 Set
789.00 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following item918
size of 3 core, XLPE aluminium conductor cable of 33 kV grade as required.
0 0
789.01 300 sq. mm item919 54 Set
789.02 240 sq. mm item920 8 Set
790.00 Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following item921
size of 3 core, XLPE aluminium conductor cable of 33 kV grade as required.
300 sq. mm
6 Set
791.00 Providing, laying and fixing of following dia R.C.C. pipe NP3 class complete with R.C.C. collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) for item922
road crossings including excavation and refilling etc. complete as required.
0 0
791.01 150 mm dia. item923 300 M
791.02 300 mm dia. item924 1600 M
792.00 Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 item925
graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size),
inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete
as per standard design :
Inside size 150 x 150 cm and 150 cm deep including RCC cover with frame (heavy duty).
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
40 Nos.
Total 0 0
H BUS TRUNKING SYSTEM 0 0
SANDWITCH TYPE RISING MAIN 0 0.00
793.00 Supplying, installing by suspension on ceiling/along the wall, testing and commissioning of following capacity Sandwich Type Rising Mains for use on 3 item926
phase 4 wire 415 V, 50Hz A.C. supply with metal clad enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick
steel sheet duly powder coated in convenient sections complete with 4 Nos. aluminium bus bars having current density of 130 A/ sq. cm at nominal
current rating, necessary joints, elbow joints & expansion joints and bends, fire barrier at each floor, provision of tapping at every meter, adopter box and
copper flexible for joints, continuous earthing with 2 Nos. aluminium strip of suitable size (one on each side) including, G.I. clamping brackets,
suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required.
Note: The bus trunking shall be measured along the length of enclosure. The Aluminium strips which will go inside L.T. panels & end termination boxes of
transformers shall not be into measurement of bus trunking quantity.
0 0
793.01 800 Amp. Outdoor (IP-65) (4P) Aluminium bus trunking having Neutral =100% + 2 nos. of 50x6 mm external Aluminium earth strip item927 67 M
793.02 1000 Amp. Outdoor (IP-65) (4P) Aluminium bus trunking having Neutral =100% + 2 nos. of 50x6 mm external Aluminium earth strip item928 700 M
793.03 1250 Amp. Outdoor (IP-65) (4P) Aluminium bus trunking having Neutral =100% + 2 nos. of 50x6 mm external Aluminium earth strip item929 268 M
793.04 1600 Amp. Outdoor (IP-65) (4P) Aluminium bus trunking having Neutral =100% + 2 nos. of 50x 6 mm external Aluminium earth strip . item930 288 M
793.05 2000 Amp. Indoor (IP-55) (4P) Aluminium bus trunking having Neutral =100% + 2 nos. of 50x 6 mm external Aluminium earth strip. item931 52 M
793.06 2500 Amp. Indoor (IP-55) (4P) Aluminium bus trunking having Neutral =100% + 2 nos. of 50x 6 mm external Aluminium earth strip. item932 52 M
793.07 3200 Amp. Indoor (IP-55) (4P) Aluminium bus trunking having Neutral =100% + 2 nos. of 50x 6 mm external Aluminium earth strip. item933 335 M
793.08 4000 Amp. Indoor (IP-55) (4P) Aluminium bus trunking having Neutral =100% + 2 nos. of 50x 6 mm external Aluminium earth strip. item934 116 M
I LT CABLES & EARTHING 0 0
794.00 Supply of following size of 1.1 kv grade FRLS multicore aluminium conductor XLPE insulated and PVC sheathed armoured cable as per IS: 7098:1988 (Part- item935
I) with upto date amendments.
0 0
794.01 4 core, 35 Sq.mm. item936 8425 M
794.02 4 core, 25 Sq.mm. item937 7265 M
794.03 4 core, 16 Sq.mm. item938 4282 M
794.04 3½ core X 300 Sq.mm. item939 10827 M
794.05 3½ core X 240 Sq.mm. item940 3955 M
794.06 3½ core X 185 Sq.mm. item941 4715 M
794.07 3½ core X 150 Sq.mm. item942 1233 M
794.08 3½ core X 120 Sq.mm. item943 1364 M
794.09 3½ core X 95 Sq.mm. item944 2805 M
794.10 3½ core X 70 Sq.mm. item945 1037 M
794.11 3½ core, 50 Sq.mm. item946 1564 M
794.12 3 core, 95 Sq.mm. item947 556 M
794.13 3 core, 50 Sq.mm. item948 237 M
794.14 3 core, 35 Sq.mm. item949 742 M
794.15 3 core, 25 Sq.mm. item950 2279 M
794.16 3 core, 16 Sq.mm. item951 2890 M
794.17 3 core, 10 Sq.mm. item952 1710 M
794.18 3 core, 6 Sq.mm. item953 443 M
794.19 3 core, 4 Sq.mm. item954 287 M
795.00 Supply of following size of 1.1kv grade FRLS multicore copper conductor XLPE insulated and PVC sheathed armoured cable as per IS : 7098:1988 with item955
upto date amendments.
0 0
795.01 1 core, 185 Sq.mm. item956 433 M
795.02 4 core, 16 Sq.mm. item957 3334 M
795.03 4 core, 10 Sq.mm. item958 3482 M
795.04 4 core, 6 Sq.mm. item959 3090 M
795.05 3 core, 4 Sq.mm. item960 3605 M
795.06 3 core, 2.5 Sq.mm. item961 2575 M
796.00 Supply of following size of 1.1kv grade FRLS copper conductor XLPE insulated and PVC sheathed unarmoured cable as per IS : 7098:1988 with upto date item962
amendments.
0 0
796.01 1 core, 16 Sq.mm. unarm cable item963 100 M
796.02 3 core, 4 Sq.mm. armourd cable item964 400 M
796.03 3 core, 6 Sq.mm. armourd cable item965 400 M
797.00 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. Tagging item966
on both the ends will be done with aluminium tags etc. complete as required.
0 0
797.01 Upto 35 sq. mm (clamped with 1mm thick saddle) item967 28617 M
797.02 Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) item968 4649 M
797.03 Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp) item969 4971 M
797.04 Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp) item970 11087 M
798.00 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand item971
cushioning, protective covering and refilling the trench etc. as required. Tagging on both the ends will be done with aluminium tags etc. complete as
required.
0 0
798.01 Upto 35 sq. mm item972 7519 M
798.02 Above 35 sq. mm and upto 95 sq. mm item973 1240 M
798.03 Above 95 sq. mm and upto 185 sq. mm item974 1216 M
798.04 Above 185 sq. mm and upto 400 sq. mm item975 2956 M
799.00 Supplying and making indoor end termination with brass single compression gland (Heavy duty type) and aluminium lugs for following size of PVC item976
insulated and PVC sheathed / XLPE aluminium conductor armoured cable of 1.1 KV grade as required.
0 0
799.01 4 core, 35 Sq.mm. item977 130 Set
799.02 4 core, 25 Sq.mm. item978 170 Set
799.03 4 core, 16 Sq.mm. item979 116 Set
799.04 3½ core X 300 Sq.mm. item980 120 Set
799.05 3½ core X 240 Sq.mm. item981 48 Set
799.06 3½ core X 185 Sq.mm. item982 50 Set
799.07 3½ core X 150 Sq.mm. item983 16 Set
799.08 3½ core X 120 Sq.mm. item984 22 Set
799.09 3½ core X 95 Sq.mm. item985 38 Set
799.10 3½ core X 70 Sq.mm. item986 26 Set
799.11 3½ core, 50 Sq.mm. item987 20 Set
799.12 3 core, 95 Sq.mm. item988 24 Set
799.13 3 core, 50 Sq.mm. item989 2 Set
799.14 3 core, 35 Sq.mm. item990 16 Set
799.15 3 core, 25 Sq.mm. item991 42 Set
799.16 3 core, 16 Sq.mm. item992 102 Set
799.17 3 core, 10 Sq.mm. item993 82 Set
799.18 3 core, 6 Sq.mm. item994 14 Set
799.19 3 core, 4 Sq.mm. item995 22 Set
800.00 Supply and making end termination with double brass compression gland and Copper thimbles for XLPE insulated and PVC sheathed copper conductor item996
cable of 1.1kv grade of the following sizes as required.
0 0
800.01 1 core, 185 Sq.mm. item997 32 Set
800.02 4 core, 16Sq.mm. item998 114 Set
800.03 4 core, 10Sq.mm. item999 166 Set
800.04 4 core, 6 Sq.mm. item1000 50 Set
800.05 3 core, 4 Sq.mm. item1001 200 Set
800.06 3 core, 2.5 Sq.mm. item1002 200 Set
800.07 1 core, 16 Sq.mm. unarm cable item1003 6 Set
800.08 3 core, 4 Sq.mm. armourd cable item1004 20 Set
800.09 3 core, 6 Sq.mm. armourd cable item1005 20 Set
801.00 Supply, laying, testing and commissioning of following FRLS PVC Copper armoured shielded/ unshielded control cable in trenches /on existing cable item1006
trays/ walls including the cost of saddles, gutties, clamps, lugs etc.as required.
0 0
801.01 12C x 2.5 sq.mm shielded cable item1007 1000 M
801.02 6C x 2.5 sq.mm item1008 600 M
801.03 3C x 2.5 sq.mm item1009 1200 M
801.04 3C x 1.5 sq.mm item1010 500 M
802.00 Supplying and making indoor end termination with brass double compression gland (flame proof type) and copper lugs for following size of PVC insulated item1011
and PVC sheathed copper conductor armoured cable of 1.1 KV grade as required.
0 0
802.01 12 Core x 2.5 Sqmm. item1012 40 Set
802.02 6 Core x 2.5 Sqmm. item1013 18 Set
802.03 3 Core x 2.5 Sq.mm item1014 60 Set
802.04 3 core X 1.5 sq. mm item1015 20 Set
802.05 3 core X 25 Sq.mm. cooper conductor armoured cable item1016 32 Set
802.06 3 core X 16 Sq.mm. cooper conductor armoured cable item1017 190 Set
802.07 3 core X 10 Sq.mm. cooper conductor armoured cable item1018 246 Set
802.08 3 core X 6 Sq.mm. cooper conductor armoured cable item1019 16 Set
803.00 Supplying, laying, connecting ,terminating on both side testing & commissioning of following size of 1.1 kv grade single/multicore copper conductor Fire item1020
Survival Cables, as per BS7846, Mica Tape Insulated overall shielded, XLPE Insulated, Armored, Halogen Free Sheathed, LPCB Certified for required sizes-
as per specifications including complete ,on existing cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing
bolts, complete on as required. Tagging on both the ends will be done with aluminium tags etc. complete as required. (For fire fighting main panel and
smoke fans)
0.00 0
803.01 3 core X 25 Sq.mm. cooper conductor armoured cable item1021 2392 M
803.02 3 core X 16 Sq.mm. cooper conductor armoured cable item1022 7507 M
803.03 3 core X 10 Sq.mm. cooper conductor armoured cable item1023 8061 M
803.04 3 core X 6 Sq.mm. cooper conductor armoured cable item1024 786 M
Total 0 0
J Cable Tray 0 0
804.00 Supply and installation of following size of (Hot dip) GI Ladder type cable trays in convenient sections, joined with connectors including horizontal and item1025
vertical bends, reducers, tees, cross members, clamps, connection pieces and other accessories as required, duly suspended from the ceiling with GI
suspenders including GI bolts & GI nuts, etc. complete as required.
0 0
804.01 300mm 50mm 1.6mm thickness item1026 186 M
804.02 450mm 50mm 1.6mm thickness item1027 436 M
804.03 600mm 60mm 2mm thickness item1028 1010 M
804.04 750mm 75mm 2mm thickness item1029 6 M
804.05 1000mm 75mm 2.0mm thickness item1030 8168 M
804.06 1200mm 75mm 2.0mm thickness item1031 98 M
805.00 Supply and installing of following size of (Hot dip) GI Perforated type cable trays in convenient sections, joined with connectors including horizontal and item1032
vertical bends, reducers, tees, cross members, clamps, connection pieces and other accessories as required, duly suspended from the ceiling GI
suspenders including GI bolts & GI nuts including fabrication, etc. complete as required.
0 0
805.01 150mm 50mm 1.6mm thickness item1033 13846 M
805.02 300mm 50mm 1.6mm thickness item1034 5386 M
805.03 450mm 50mm 1.6mm thickness item1035 280 M
805.04 600mm 60mm 2mm thickness item1036 2514 M
805.05 750mm 75mm 2mm thickness item1037 6 M
805.06 1000mm 75mm 2.0mm thickness item1038 122 M
806.00 Fabricating, Supply and installing of following size of FRP Ladder type cable trays in convenient sections, joined with connectors including horizontal and item1039
vertical bends, reducers, tees, cross members, clamps, connection pieces and other accessories as required, duly fixed on existing angle iron brackets
including GI bolts & nuts, including fabrication, powder coated etc. as per specification as required. (For Tunnel)
0 0
806.01 450 mm widthx100mm depth item1040 38 M
806.02 600 mm widthx100mm depth item1041 38 M
806.03 1000mm widthx100mm depth item1042 726 M
807.00 Supply and fixing of Wire mesh Cable tray shall be designed and tested as per IEC 61537.The Mesh cable tray shall be of Electro Galvanised confirming item1043
to DIN E 12329 for Indoor closed and dry atmospheric application. Wire mesh cable tray should be of self interlocking system for connecting the
consecutive length of 3mtr tray without additional connectors. The Diameter of the steel wire shall be minimum 3.5 mm for trays upto 150 mm and
minimum 4.5 mm for trays up to 600 mm Width. The Wire mesh cable tray shall be supplied with the standard length of 3 Mtr including suspending
from ceiling with full threaded GI rods, connection pieces, G.I. nut bolts, G.I. washers, fasteners etc. complete as required. (supports / suspenders will
be from same make of cable tray).
0 0
807.01 300 mm width x 55mm Height item1044 200 M
807.02 150 mm width x 35mm Height item1045 200 M
K GI Raceway & Junction boxes (IP 55) 0 0
808.00 Supply, assembly and laying of under floor trunking made out of 1.6mm thick GI sheet complete with jointing sleeve, horizontal bends, vertical bends, item1046
level adjustment components and closer, vertical elbow, covers, access outlet. etc. complete with all other accessories under floor installation including
cutting and chasing the floor/ or on surface, making good the same, placing in position and cleaning from inside complete etc. as required.
0 0
808.01 300 mm x 38 mm (3 compartment) item1047 4290 M
808.02 150 mm x 38 mm (2 compartment) item1048 496 M
808.03 100 mm x 38 mm (2 compartment) item1049 440 M
808.04 50 mm x 38 mm (1 compartment) item1050 440 M
809.00 Providing and fixing 400 x 400 x 50 mm deep GI (hot dip galvanized) floor raceways junction box made out of 1.6 mm thick sheet steel as per specification. item1051
242 Nos.
810.00 Providing and fixing 250 x 250 x 50 mm deep GI (hot dip galvanized) raceways made out of 1.6 mm thick sheet steel junction box as per specification. item1052
72 Nos.
811.00 Providing and fixing 150 x 150 x 50 mm deep GI (hot dip galvanized) raceways made out of 1.6 mm thick sheet steel junction box as per specification. item1053
62 Nos.
812.00 Providing and fixing 100 x 100 x 50 mm deep GI (hot dip galvanized) raceways made out of 1.6 mm thick sheet steel junction box as per specification. item1054
62 Nos.
813.00 Providing and fixing 350 x 350 x 60-75 mm deep Gl (hot dip galvanized) raceways made out of 1.6 mm thick sheet steel cross over box complete as item1055
requried as per specification .
792 Nos.
814.00 Providing and fixing 300 x 200 x 50 mm deep Gl (hot dip galvanized) raceways made out of 1.6 mm thick sheet steel vertical access box complete as item1056
requried as per specification.
298 Nos.
815.00 Supply and fixing of pop up box with steel finish for under floor trunking on floor including connection & accessories etc. as required. item1057 194 Nos.
L LT PANELS 0 0
A. ALL LT PANELS SPECIFIC INCLUSIONS: 0 0
The outgoing feeders as indicated in SLD shall have suitable range of followings (except capacitor feeders). 0 0
ALL Digital electronic MFM and KWH meter shall be provided with RS 485 port/RJ-45 communication port compatible for BMS & Three phase indicating
lamps protected by 2 amps SP MCBs.
0 0
All ACB's shall be suitable for minimum 65/50 kA as specified in the items (Icu=Ics=Icw for 1 sec.) 0 0
All MCCB's shall be suitable for unless otherwise specified in the item (Icu=Ics= 1 sec=100%.) 0 0
Wiring with space heater, thermostat and control MCB's shall be provided for all vertical sections of main LT panel. 0 0
All breakers shall be interlocked as per schematic diagram through PLC with Auto load management control. 0 0
All incoming as well as outgoing feeders shall have pad locking facility. 0 0
Suitable danger board shall be provided. 0 0
All MCCB’s shall be provided with front rotary handle and operating mechanism for door interlock with Pad locking of MCCB’s handles in “OFF” Position.
0 0
The Panel fabricator shall provide Al./ Copper Bus-bars link from Breakers wherever more than two nos. of cables are terminated in the breakers.
0 0
All incoming and outgoing air circuit breakers shall be placed on middle portion of the vertical in single tier formation. 0 0
Additional set of C.T.s, potential free contacts, connectors, contactors with wiring etc. are to be provided for BMS including space required for various
transducers in Main Switch Board sections. Only transducers shall be supplied by BMS contractor.
0 0
All distribution sub panels shall be provided with class 1.0 accuracy meters as well as CTs. 0 0
All hinged door shall be earthed through 2.5 sq mm tinned braided copper wire. 0 0
Panels shall be Powder Coated with Siemens grey paint shade no. RAL-7032 of IS-5. 0 0
All of the following panels enclosure shall be type tested assembly as per IEC:61439 0 0
All motor feeders MCCBs shall be of motor duty. 0 0
Supporting/Base rigid steel framework. 0 0
TPN ACB’s / MCCB’s shall mean 3 pole ACB’s / MCCB’s with adequate size of neutral link. 0 0
Final rating & various parameter, in addition to the specified above shall be selected on the bases of ambient conditions at site, approved equipments
rating, client specific requirements, standards specified in the tender, requirement for the NOC from various statutory authorities, BCA/AAI guidelines &
as per detail designed stage calculations.
0 0
All Panel including front operated panel/rooms shall be equipped with automatic fire suppression system as specified in the tender specifications &
other statutory requirements.
0 0
All Back access panel shall be housed with encapsulated Spark gap based class-1/type-1 SPD with in built fuse for each incomer at each Bus Section of
100kA 10/350mS as per IS/IEC 62305-3 LPL-I. All front operated panel/Sub panels shall be housed with Mov based class-2/type-2 SPD with in built fuse
for each incomer at each Bus Section of In 10kA & Irms 20kA 5/20mS as per IS/IEC 62305-3 LPL-I.
0 0
B BACK ACCESS PANELS WITH ACB's 0 0
Design, fabrication, assembly, wiring and supply, erection , testing and commissioning of front operated dead front cubicle type compartmentalised as
per Form 3B, rear access free standing, dust and vermin proof (IP 43 ingress protection) main switchboards conforming to IEC-61439 suitable for use at
433 volts, 3 phase 4 wire 50 Hertz system suitable for a symmetrical fault level of 65/50kA (specified with the panel) at 433 volts, fabricated from 2 mm
outer thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable
angle/channel/T/flat sections including 3 mm thick gland plates on top and bottom and including lifting hooks and including earth strip of required size
with 2 nos. earthing terminals and including powder coated paint finish of approved shade over metal surface cleaned and treated with nine tank process
complete with interconnections etc. as per specifications, as required and as below. The incoming and outgoing feeders shall be accommodated in a
modular arrangement, detachable gland plates, adequate size cable alley, Sign writing, Painting, Earthing, Numbering, Danger plate, including PVC
insulated copper FRLS wires of minimum 1.5sq.mm & 2.5sq.mm for CT's etc. complete as required as per specifications and drawing attached. A fairly
uniform coating of 80 or better microns shall be provided.
0 0
(Note: The contractor may select the next higher fault rating of ACB/MCCB if it is not readily available ,without any extra cost.) 0 0
Each Panel Shall be equipped with Automatic fire suppression system, having linear Pneumatic heat detection tube based with Novec 1230. The system
shall be LPCB approved & coordination with Fire alarm system etc., suitable for the panel size accordance with specifications, NEC-2011,NBC ammended
up to date.
0 0
816.00 MAIN LT PANEL Service Yard item1058 0 0
Incomers: 0 0
i) 3200 Amp. 4 Pole ACB - 3 set (For 3 nos. transformers) 0 0
Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu=Icw) Electrical Draw Out Motorised operated, fitted with interlocked
door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS/IEC-
60947 as amended up-to-date complete with Independent Electrical & manual spring closing mechanism, Microprocessor release (EMI & EMC certified)
for over current, earth fault & short circuit protection, Shunt trip coil 24V D.C / 220V A.C, Breaker Control Switch - 16A, Test terminal block set, circuits as
per standard practice, auxiliary contactors with contacts (minimum 4NO+4NC) for positive interlocking of the breakers, necessary electrical interlocking
with PLC auto controls etc. as required including following accessories and suitable terminals to receive bus duct connections.
0 0
LED indication lamps for RYB, breaker 'ON/ OFF/ TRIP', spring charged, DC control supply healthy etc. with 2Amp control MCBs 0 0
Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) 0- 3200A, class - 1.0 accuracy , showing V, A, PF, Hz, KW,
KWH, KVAR , Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of 3200/5 Amp ratio, 15 VA Class 1.0 metering.
0 0
Microprocessor release/s based relay/s (EMI & EMC certified) for over current, earth fault & short circuit protection, Under voltage with definite time
,Trip ckt. supervision, Master trip relays along with dual core CT of current transformers of 3200/5A ratio, 15 VA class-5P10 protection - 1 set.
0 0
Suitable size & set of CT's for APFC Relay (class 1.0 15VA) & a set of neutral CT's for REF protection 0 0
Terminals to receive 3200A Al. Bus duct suitable & complete required as per site 0 0
Bus Bar : 0 0
3 Sections of Electrolytic high conductivity Aluminium extensible three phase and neutral busbars rated at 4000 amps , & auxiliary Bus Bars of suitable
capacity insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints having a maximum current density as per Indian standards
suitable to with stand symmetrical fault level of 50 kA at 433 volts i/c DMC/SMC bus bars supports at required intervals complete for cross section, size
supports & their spacing etc. The neutral busbar is to be of full capacity.
0 0
Bus couplers 0 0
3200 Amp 4 pole ACB - 2 set. 0 0
a)Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu =Icw) upto 433V) Electrical Draw Out Motorised operated, fitted
with interlocked door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact,
conforming to IS/IEC-60947 as amended up-to-date complete with following accessories for each ACB
0 0
b) Independent Electrical / manual spring closing mechanism - I No. 0 0
c) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB, test terminal block set, circuits as per
standard practice, auxiliary contacts for positive interlocking of the breakers as required.
0 0
Interlocking: 0 0
Electrical Interlocking through advance contacts / contactors in MCCB/ACB's (Incomers & Bus couplers) should be provided to ensure that only one
supply is available at a time on each section of bus and to eliminate any possibility of accidentally approaching two supplies at one bus section as per
single line diagram enclosed.
0 0
Outgoings: 0 0
A All ACB (Ics=lcu=Icw ) with microprocessor release with O/L, S/C & earth fault protection & followings shall be applicable to each. 0 0
a) Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu =Icw) upto 433V) Manual Draw Out, fitted with interlocked door,
automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS/IEC-60947 as
amended up-to-date complete with following accessories for each ACB with solid neutral link
0 0
b) Independent manual spring closing mechanism - I No. 0 0
c) Microprocessor release(EMI & EMC certified) for with O/C S/C & earth fault protection - I set. 0 0
d)Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0 accuracy , showing V, A, PF, Hz,
KW, KWH, KVAR , Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 15 VA Class 1.0 metering.
0 0
e) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB, test terminal block set, circuits as per
standard practice, auxiliary contacts for positive interlocking of the breakers as required.
0 0
f) Shunt trip coil 24VDC/220V A.C. 0 0
g) Terminals to receive suitable Al. Bus duct/cabling arrangement complete required as per site. 0 0
i) 2 Nos. - 2000 Amp. 50kA TP+N MDO ACB with suitable terminals to receive bus duct connections for each. (2 Capacitor Banks + 1 no. space provision )
0 0
ii) 2 Nos. - 1600 Amp. 50kA TP+N MDO ACB with suitable terminals to receive bus duct connections for each.( 2 Nos. AC panel + 1 no. Space provision)
0 0
iii) 5 Nos. - 1600 Amp. 50kA 4P MDO ACB with suitable terminals to receive bus duct connections for each.( 4 Nos. CHILLERS + 1 spare ) 0 0
iv) 4 No. - 1000 Amp. 50kA 4P MDO ACB with suitable terminals to receive bus duct connections for each. ( 3 Nos. HWG + 1 spare) 0 0
iv) 1 No. - 1000 Amp. 50kA TP+N MDO ACB with suitable terminals to receive bus duct connections for each. Capacitor Bank-2 0 0
B All MCCB (Ics=lcu) with microprocessor release with O/L, S/C& earth fault protection & followings shall be applicable to each. 0 0
All outgoing with microprocessor based release MCCB for O/C, S/C & earth fault protection of following capacity and rating, 50 KA (Ics=Icu upto 433 V )
with Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0 accuracy , showing V, A, PF,
KW, KWH Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 15 VA Class 1.0 metering. ,
Spreader links and phase barrier, solid neutral link complete with wiring , connections etc.
0 0
i) 4 Nos. - 630 Amp. TPN 50kA MCCB ( 1-STP, 2-DG Aux. Spare ) 0 0
ii) 6 Nos. - 400 Amp. TPN 50kA MCCB ( 2-PHE, 2-F.F, 2 spare ) 0 0
iii) 6 Nos. - 250 Amp. TPN 50kA MCCB ( Service yard ventilation, External development , L&P panel , Project Office panel + 2 spare ) 0 0
PLC 0 0
1 no. 32-bit microprocessor based PLC with MMI for auto load Management of Main LT Panel as required with,Transformer incomers ACB's and Bus
couplers ACB's, electrical interlocking etc. as required and complete interfacing with DG Panel.
0 0
Necessary interlocking with PLC auto controls such that 3 Nos. T/F incomer, 2 No Bus couplers shall be successfully operational in all possible
combinations.
0 0
The Switchboard with Logic control panel shall be complete with all interconnections, risers, internal wiring, labels, control/circuit fuses etc. complete as
required.
0 0
Battery & Battery Charger 0 0
Supplying, installing, testing and commissioning of 230 V, Single Phase, 50 HZ, AC operated suitable capacity (capacity to be decided after selecting the
Makes of Material for switchgears) AH battery with Battery Charger for DC supply of following rating with Boost and trickle charging facility and
protection from over charging a DC DB with required numbers of outgoing DP MCB's plus 2 Nos. of 16 Amp. DP MCB's as spare feeders complete as
required and as per specifications.
0 0
MAIN LT PANEL (HVAC/SERVICE YARD) AS ABOVE 1 Set
817.00 HVAC PUMP PANEL item1059 0 0
Incomers: 0 0
i) 1600 Amp. 4 Pole ACB - 2 set 0 0
Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu=Icw) Electrical Draw Out Motorised operated, fitted with interlocked
door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS/IEC-
60947 as amended up-to-date complete with Independent Electrical & manual spring closing mechanism, Microprocessor release (EMI & EMC certified)
for over current, earth fault & short circuit protection, Shunt trip coil 24V D.C / 220V A.C, Breaker Control Switch - 16A, Test terminal block set, circuits as
per standard practice, auxiliary contactors with contacts (minimum 4NO+4NC) for positive interlocking of the breakers, necessary electrical interlocking as
required including following accessories and suitable terminals to receive bus duct connections.
0 0
LED indication lamps for RYB, breaker 'ON/ OFF/ TRIP', spring charged, DC control supply healthy etc. with 2Amp control MCBs 0 0
Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) 0- 1600A, class - 1.0 accuracy , showing V, A, PF, Hz, KW,
KWH, KVAR , Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of 1600/5 Amp ratio, 15 VA Class 1.0 metering.
0 0
Microprocessor release/s based relay/s (EMI & EMC certified) for over current, earth fault & short circuit protection, Under voltage with definite time
,Trip ckt. supervision, Master trip relays along with dual core CT of current transformers of 1600/5A ratio, 15 VA class-5P10 protection - 1 set.
0 0
Terminals to receive1600A Al. Bus duct suitable & complete required as per site 0 0
Bus Bar : 0 0
2 Sections of Electrolytic high conductivity Aluminium extensible three phase and neutral busbars rated at 2000 amps , & auxiliary Bus Bars of suitable
capacity insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints having a maximum current density as per Indian standards
suitable to with stand symmetrical fault level of 50 kA at 433 volts i/c DMC/SMC bus bars supports at required intervals complete for cross section, size
supports & their spacing etc. The neutral busbar is to be of full capacity.
0 0
Interlocking: 0 0
Electrical Interlocking through advance contacts / contactors in MCCB's (Incomers & Bus couplers) should be provided to ensure that only one supply is
available at a time on each section of bus and to eliminate any possibility of accidentally approaching two supplies at one bus section as per single line
diagram enclosed.
0 0
Outgoings: 0 0
All MCCB (Ics=lcu) with microprocessor release with O/L, S/C& earth fault protection & followings shall be applicable to each. 0 0
All outgoing with microprocessor based release MCCB for O/C, S/C & earth fault protection of following capacity and rating, 50 KA (Ics=Icu upto 433 V )
with Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0 accuracy , showing V, A, PF,
KW, KWH Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 15 VA Class 1.0 metering. ,
Spreader links and phase barrier, solid neutral link complete with wiring , connections etc.
0 0
i) 5 Nos. - 250 Amp. TPN 50kA MCCB ( 4 Nos. CDW Pump, 1 spare ) 0 0
ii) 5 Nos. - 200 Amp. TPN 50kA MCCB ( 4 Nos. CHWSP ,1 spare) 0 0
iii) 10 Nos. - 100 Amp. TPN 50kA MCCB ( 4 Nos. CHWPP, 4 Nos. HWP, 2 spare) 0 0
iv) 10 Nos. - 125 Amp. TPN 50kA MCCB ( 8 Nos. CT fans, 2 spare) 0 0
v) 3 Nos. - 32 Amp. TPN 50kA MCCB ( 2 Nos. PMS pumps, 1 spare) 0 0
8 set - Fully automatic Star Delta starter with suitable incomer of MCCB along with rotary handle for operating 15 kw motors/ fan capacity, complete
with contactors, overload protection relay, current sensing type single phase preventer, ON/ OFF indications, push buttons, auto / manual / off selector
switch, suitable Digital Ammeter with cast resin suitable rating CT's and all other accessories with suitable rating PVC insulated FRLS single core copper
conductor cable etc. complete as required.
0 0
4 set - Fully automatic Star Delta starter with suitable incomer of MCCB along with rotary handle for operating 25 kw motors/ fan capacity, complete
with contactors, overload protection relay, current sensing type single phase preventer, ON/ OFF indications, push buttons, auto / manual / off selector
switch, suitable Digital Ammeter with cast resin suitable rating CT's and all other accessories with suitable rating PVC insulated FRLS single core copper
conductor cable etc. complete as required.
0 0
4 set - Fully automatic Star Delta starter with suitable incomer of MCCB along with rotary handle for operating 22 kw motors/ fan capacity, complete
with contactors, overload protection relay, current sensing type single phase preventer, ON/ OFF indications, push buttons, auto / manual / off selector
switch, suitable Digital Ammeter with cast resin suitable rating CT's and all other accessories with suitable rating PVC insulated FRLS single core copper
conductor cable etc. complete as required.
0 0
4 set - Fully automatic Star Delta starter with suitable incomer of MCCB along with rotary handle for operating 70 kw motors/ fan capacity, complete
with contactors, overload protection relay, current sensing type single phase preventer, ON/ OFF indications, push buttons, auto / manual / off selector
switch, suitable Digital Ammeter with cast resin suitable rating CT's and all other accessories with suitable rating PVC insulated FRLS single core copper
conductor cable etc. complete as required.
0 0
HVAC PUMP PANEL (HVAC/SERVICE YARD) AS ABOVE 1 Set
818.00 MAIN LT PANEL T-3 BASEMENT item1060 0 0
Incomers: 0 0
i) 4000 Amp. 4 Pole ACB - 3 set (For 3 nos. transformers) 0 0
Air Circuit Breaker Horizontal drawout type of fault breaking capacity 65KA (Ics=lcu=Icw) Electrical Draw Out Motorised operated, fitted with interlocked
door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS/IEC-
60947 as amended up-to-date complete with Independent Electrical & manual spring closing mechanism, Microprocessor release (EMI & EMC certified)
for over current, earth fault & short circuit protection, Shunt trip coil 24V D.C / 220V A.C, Breaker Control Switch - 16A, Test terminal block set, circuits as
per standard practice, auxiliary contactors with contacts (minimum 4NO+4NC) for positive interlocking of the breakers, necessary electrical interlocking
with PLC auto controls etc. as required including following accessories and suitable terminals to receive bus duct connections.
0 0
LED indication lamps for RYB, breaker 'ON/ OFF/ TRIP', spring charged, DC control supply healthy etc. with 2Amp control MCBs 0 0
Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) 0- 4000A, class - 1.0 accuracy , showing V, A, PF, Hz, KW,
KWH, KVAR , Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of 4000/5 Amp ratio, 15 VA Class 1.0 metering.
0 0
Microprocessor release/s based relay/s (EMI & EMC certified) for over current, earth fault & short circuit protection, Under voltage with definite time
,Trip ckt. supervision, Master trip relays along with dual core CT of current transformers of 4000/5A ratio, 15 VA class-5P10 protection - 1 set.
0 0
Suitable size & set of CT's for APFC Relay (class 0.5, 15VA) & a set of neutral CT's for REF protection 0 0
Terminals to receive 4000A Al. Bus duct suitable & complete required as per site 0 0
Bus Bar : 0 0
3 Sections of Electrolytic high conductivity Aluminium extensible three phase and neutral busbars rated at 5000 amps , & auxiliary Bus Bars of suitable
capacity insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints having a maximum current density as per Indian standards
suitable to with stand symmetrical fault level of 65 kA at 433 volts i/c DMC/SMC bus bars supports at required intervals complete for cross section, size
supports & their spacing etc. The neutral busbar is to be of full capacity.
0 0
Bus couplers 0 0
4000 Amp 4 pole ACB - 2 set. 0 0
a)Air Circuit Breaker Horizontal drawout type of fault breaking capacity 65KA (Ics=lcu =Icw) upto 433V) Electrical Draw Out Motorised operated, fitted
with interlocked door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact,
conforming to IS/IEC-60947 as amended up-to-date complete with following accessories for each ACB.
0 0
b) Independent Electrical / manual spring closing mechanism - I No. 0 0
c) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB, test terminal block set, circuits as per
standard practice, auxiliary contacts for positive interlocking of the breakers as required.
0 0
Interlocking: 0 0
Electrical Interlocking through advance contacts / contactors in MCCB/ACB's (Incomers & Bus couplers) should be provided to ensure that only one
supply is available at a time on each section of bus and to eliminate any possibility of accidentally approaching two supplies at one bus section as per
single line diagram enclosed.
0 0
Outgoings: 0 0
A All ACB (Ics=lcu=Icw ) with microprocessor release with O/L, S/C & earth fault protection & followings shall be applicable to each. 0 0
a) Air Circuit Breaker Horizontal drawout type of fault breaking capacity 65KA (Ics=lcu =Icw) upto 433V) Manual Draw Out, fitted with interlocked door,
automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS/IEC-60947 as
amended up-to-date complete with following accessories for each ACB with solid neutral link
0 0
b) Independent manual spring closing mechanism - I No. 0 0
c) Microprocessor release(EMI & EMC certified) for with O/C S/C & earth fault protection - I set. 0 0
d)Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0 accuracy , showing V, A, PF, Hz,
KW, KWH, KVAR , Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 15 VA Class 1.0 metering.
0 0
e) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB, test terminal block set, circuits as per
standard practice, auxiliary contacts for positive interlocking of the breakers as required.
0 0
f) Shunt trip coil 24VDC/220V A.C. 0 0
g) Terminals to receive suitable Al. Bus duct/cabling arrangement complete required as per site. 0 0
i) 3 Nos. - 3200 Amp. 65kA TP+N MDO ACB with suitable terminals to receive bus duct connections for each. (3 Em. Panels + 1 no. space provision)
0 0
ii) 3 Nos. - 2500 Amp. 65kA TP+N MDO ACB with suitable terminals to receive bus duct connections for each. (2 Capacitor Banks + 1 no. spare)
0 0
ii) 1 No. - 1000 Amp. 65kA TP+N MDO ACB with suitable terminals to receive bus duct connections for each. (1 Capacitor Bank) 0 0
iii) 5 Nos. - 1600 Amp. 65kA TP+N MDO ACB with suitable terminals to receive bus duct connections for each. (2 Nos. Main AHU panel + 2 Nos. Main
Power Panel +1 no. spare)
0 0
iv) 5 Nos. - 1250 Amp. 65kA 4P MDO ACB with suitable terminals to receive bus duct connections for each. ( 2 Nos. Main Lighting Panel + 2 Nos. Main
Lifts & Esc. Panel + 1 no. Spare)
0 0
v) 3 Nos. - 1000 Amp. 65kA 4P MDO ACB with suitable terminals to receive bus duct connections for each. ( Main M.B Retail f,1,2 + 2 Nos. PBB panel+ 1
spare +1 Space )
0 0
B vi) 3 Nos. - 800 Amp. 65kA 4P MDO ACB with suitable terminals to receive bus duct connections for each. (2 Nos. BHS Panel +1 spare) 0 0
All MCCB (Ics=lcu) with microprocessor release with O/L, S/C & earth fault protection & followings shall be applicable to each. 0 0
All outgoing with microprocessor based release MCCB for O/C, S/C & earth fault protection of following capacity and rating, 65 KA (Ics=Icu upto 433 V )
with Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0 accuracy , showing V, A, PF,
KW, KWH Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 15 VA Class 1.0 metering. ,
Spreader links and phase barrier, solid neutral link complete with wiring , connections etc.
0 0
i) 3 Nos. - 400 Amp. TPN 65kA MCCB ( ELV Services + 1 Spare) 0 0
ii) 3 Nos. - 250 Amp. TPN 65kA MCCB (1 External Dev. Panel, 1 Pump Panel, 1 spare) 0 0
PLC 0 0
1 no. 32-bit microprocessor based PLC with MMI for auto load Management of Main LT Panel as required with , Transformer incomers ACB's and Bus
couplers ACB's, electrical interlocking etc. as required and complete interfacing with DG Panel.
0 0
Necessary interlocking with PLC auto controls such that 3 Nos. T/F incomer, 2 No Bus couplers shall be successfully operational in all possible
combinations.
0 0
The Switchboard with Logic control panel shall be complete with all interconnections, risers, internal wiring, labels, control/circuit fuses etc. complete as
required.
0 0
Battery & Battery Charger 0 0
Supplying, installing, testing and commissioning of 230 V, Single Phase, 50 HZ, AC operated suitable capacity (capacity to be decided after selecting the
Makes of Material for switchgears) AH battery with Battery Charger for DC supply of following rating with Boost and trickle charging facility and
protection from over charging a DC DB with required numbers of outgoing DP MCB's plus 2 Nos. of 16 Amp. DP MCB's as spare feeders complete as
required and as per specifications.
0 0
MAIN LT PANEL (T-3 BASEMENT) AS ABOVE 1 Set
819.00 MAIN EMERGENCY PANEL item1061 0 0
Incomers: 0 0
i) 3200 Amp. 4 Pole ACB - 3 set (For 3 nos.) 0 0
Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu=Icw) Electrical Draw Out Motorised operated, fitted with interlocked
door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS/IEC-
60947 as amended up-to-date complete with Independent Electrical & manual spring closing mechanism, Microprocessor release (EMI & EMC certified)
for over current, earth fault & short circuit protection, Shunt trip coil 24V D.C / 220V A.C, Breaker Control Switch - 16A, Test terminal block set, circuits as
per standard practice, auxiliary contactors with contacts (minimum 4NO+4NC) for positive interlocking of the breakers, necessary electrical interlocking
with PLC auto controls etc. as required including following accessories and suitable terminals to receive bus duct connections.
0 0
LED indication lamps for RYB, breaker 'ON/ OFF/ TRIP', spring charged, DC control supply healthy etc. with 2Amp control MCBs 0 0
Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) 0- 3200A, class - 1.0 accuracy , showing V, A, PF, Hz, KW,
KWH, KVAR , Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of 3200/5 Amp ratio, 15 VA Class 1.0 metering.
0 0
Microprocessor release/s based relay/s (EMI & EMC certified) for over current, earth fault & short circuit protection, Under voltage with definite time
,Trip ckt. supervision, Master trip relays along with dual core CT of current transformers of 3200/5A ratio, 15 VA class-5P10 protection - 1 set.
0 0
Terminals to receive 3200A Al. Bus duct suitable & complete required as per site 0 0
Bus Bar : 0 0
3 Sections of Electrolytic high conductivity Aluminium extensible three phase and neutral busbars rated at 4000 amps , & auxiliary Bus Bars of suitable
capacity insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints having a maximum current density as per Indian standards
suitable to with stand symmetrical fault level of 50 kA at 433 volts i/c DMC/SMC bus bars supports at required intervals complete for cross section, size
supports & their spacing etc. The neutral busbar is to be of full capacity.
0 0
Bus couplers 0 0
3200 Amp 4 pole ACB - 2 set. 0 0
a)Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu =Icw) upto 433V) Electrical Draw Out Motorised operated, fitted
with interlocked door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact,
conforming to IS/IEC-60947 as amended up-to-date complete with following accessories for each ACB.
0 0
b) Independent Electrical / manual spring closing mechanism - I No. 0 0
c) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB, test terminal block set, circuits as per
standard practice, auxiliary contacts for positive interlocking of the breakers as required.
0 0
Interlocking: 0 0
Electrical Interlocking through advance contacts / contactors in MCCB/ACB's (Incomers & Bus couplers) should be provided to ensure that only one
supply is available at a time and to eliminate any possibility of accidentally approaching two supplies at one bus section as per single line diagram
enclosed.
0 0
Outgoings: 0 0
A All ACB (Ics=lcu=Icw ) with microprocessor release with O/L, S/C & earth fault protection & followings shall be applicable to each. 0 0
a) Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu =Icw) upto 433V) Manual Draw Out, fitted with interlocked door,
automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS/IEC-60947 as
amended up-to-date complete with following accessories for each ACB with solid neutral link
0 0
b) Independent manual spring closing mechanism - I No. 0 0
c) Microprocessor release(EMI & EMC certified) for with O/C S/C & earth fault protection - I set. 0 0
d)Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0 accuracy , showing V, A, PF, Hz,
KW, KWH, KVAR , Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 15 VA Class 1.0 metering.
0 0
e) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB, test terminal block set, circuits as per
standard practice, auxiliary contacts for positive interlocking of the breakers as required.
0 0
f) Shunt trip coil 24VDC/220V A.C. 0 0
g) Terminals to receive suitable Al. Bus duct/cabling arrangement complete required as per site. 0 0
i) 2 Nos. - 2500 Amp. 50kA TP+N MDO ACB with suitable terminals to receive bus duct connections for each. (2 Smoke ext. Panels + 1 no. space provision)
0 0
ii) 3 Nos. - 1600 Amp. 50kA TP+N MDO ACB (2 UPS I/P panel Feeders + 1 no. spare) 0 0
B All MCCB (Ics=lcu) with microprocessor release with O/L, S/C & earth fault protection & followings shall be applicable to each. 0 0
All outgoing with microprocessor based release MCCB for O/C, S/C & earth fault protection of following capacity and rating, 35 KA (Ics=Icu upto 433 V )
with Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0 accuracy , showing V, A, KW
with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 5 VA Class 1.0 metering. , Spreader links and phase barrier, solid
neutral link complete with wiring , connections etc.
0 0
i) 5 No. - 400 Amp. TPN 50kA MCCB (4 Nos. Ventilation panels, 1 spare) 0 0
ii) 4 No. - 200 Amp. TPN 50kA MCCB (3 Nos. Pressn. panels, 1 spare) 0 0
iii) 3 Nos. - 100 Amp. TPN 50kA MCCB (2 Nos. F.F P panels, 1 spare) 0 0
PLC 0 0
Necessary interlocking with micro PLC auto controls such that 3 Nos. incomers, 2 No Bus couplers shall be successfully operational in all possible
combinations.
0 0
The Switchboard with Logic control panel shall be complete with all interconnections, risers, internal wiring, labels, control/circuit fuses etc. complete as
required.
0 0
MAIN EMERGENCY PANEL (T-3 BASEMENT) AS ABOVE 1 Set
820.00 MAIN LIGHTING PANEL item1062 0 0
Incomers: 0 0
i) 1250 Amp. 4 Pole ACB - 2 set 0 0
Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu=Icw) Electrical Draw Out Motorised operated, fitted with interlocked
door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS/IEC-
60947 as amended up-to-date complete with Independent Electrical & manual spring closing mechanism, Microprocessor release (EMI & EMC certified)
for over current, earth fault & short circuit protection, Shunt trip coil 24V D.C / 220V A.C, Breaker Control Switch - 16A, Test terminal block set, circuits as
per standard practice, auxiliary contactors with contacts (minimum 4NO+4NC) for positive interlocking of the breakers, necessary electrical interlocking.
as required including following accessories and suitable terminals to receive bus duct connections.
0 0
LED indication lamps for RYB, breaker 'ON/ OFF/ TRIP', spring charged, DC control supply healthy etc. with 2Amp control MCBs 0 0
Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) 0- 1250A, class - 1.0 accuracy , showing V, A, PF, Hz, KW,
KWH, KVAR , Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of 1250/5 Amp ratio, 15 VA Class 1.0 metering.
0 0
Microprocessor release/s based relay/s (EMI & EMC certified) for over current, earth fault & short circuit protection, Under voltage with definite time
,Trip ckt. supervision, Master trip relays along with dual core CT of current transformers of 1250/5A ratio, 15 VA class-5P10 protection - 1 set.
0 0
Terminals to receive 1250A Al. Bus duct suitable & complete required as per site 0 0
Bus Bar : 0 0
2 Sections of Electrolytic high conductivity Aluminium extensible three phase and neutral busbars rated at 1600 amps , & auxiliary Bus Bars of suitable
capacity insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints having a maximum current density as per Indian standards
suitable to with stand symmetrical fault level of 50 kA at 433 volts i/c DMC/SMC bus bars supports at required intervals complete for cross section, size
supports & their spacing etc. The neutral busbar is to be of full capacity.
0 0
Bus couplers 0 0
1250 Amp 4 pole ACB - 1 set. 0 0
a)Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu =Icw) upto 433V) Electrical Draw Out Motorised operated, fitted
with interlocked door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact,
conforming to IS/IEC-60947 as amended up-to-date complete with following accessories for each ACB.
0 0
b) Independent Electrical / manual spring closing mechanism - I No. 0 0
c) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB, test terminal block set, circuits as per
standard practice, auxiliary contacts for positive interlocking of the breakers as required.
0 0
Interlocking: 0 0
Electrical Interlocking through advance contacts / contactors in MCCB/ACB's (Incomers & Bus couplers) should be provided to ensure that only one
supply is available at a time and to eliminate any possibility of accidentally approaching two supplies at one bus section as per single line diagram
enclosed.
0 0
Outgoings: 0 0
A All MCCB (Ics=lcu) with microprocessor release with O/L, S/C & earth fault protection & followings shall be applicable to each. 0 0
All outgoing with microprocessor based release MCCB for O/C, S/C & earth fault protection of following capacity and rating, 35 KA (Ics=Icu upto 433 V )
with Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0 accuracy , showing V, A, KW
with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 5 VA Class 1.0 metering. , Spreader links and phase barrier, solid
neutral link complete with wiring , connections etc.
0 0
i) 14 Nos. - 125 Amp. TPN 35kA MCCB ( Floor Lighting Panels & spares ) 0 0
ii) 20 Nos. - 100 Amp. TPN 35kA MCCB ( Floor Lighting Panels & spares ) 0 0
Necessary interlocking 2 Nos. Incomers shall be successfully operational in all possible combinations. 0 0
The Switchboard with Logic control panel shall be complete with all interconnections, risers, internal wiring, labels, control/circuit fuses etc. complete as
required.
0 0
MAIN LIGHTING PANEL (T-3 BASEMENT) AS ABOVE 1 Set
821.00 MAIN POWER PANEL item1063 0 0
Incomers: 0 0
i) 1600 Amp. 4 Pole ACB - 1 set 0 0
Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu=Icw) Electrical Draw Out Motorised operated, fitted with interlocked
door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS/IEC-
60947 as amended up-to-date complete with Independent Electrical & manual spring closing mechanism, Microprocessor release (EMI & EMC certified)
for over current, earth fault & short circuit protection, Shunt trip coil 24V D.C / 220V A.C, Breaker Control Switch - 16A, Test terminal block set, circuits as
per standard practice, auxiliary contactors with contacts (minimum 4NO+4NC) for positive interlocking of the breakers, necessary electrical interlocking.
as required including following accessories and suitable terminals to receive bus duct connections.
0 0
LED indication lamps for RYB, breaker 'ON/ OFF/ TRIP', spring charged, DC control supply healthy etc. with 2Amp control MCBs 0 0
Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) 0- 1600A, class - 1.0 accuracy , showing V, A, PF, Hz, KW,
KWH, KVAR , Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of 1600/5 Amp ratio, 15 VA Class 1.0 metering.
0 0
Microprocessor release/s based relay/s (EMI & EMC certified) for over current, earth fault & short circuit protection, Under voltage with definite time
,Trip ckt. supervision, Master trip relays along with dual core CT of current transformers of 1600/5A ratio, 15 VA class-5P10 protection - 1 set.
0 0
Terminals to receive 1600A Al. Bus duct suitable & complete required as per site 0 0
1600A, 4P ATS (Automatic Transfer Switch) Stand-Alone with By-Pass arrangement With Over lapping Neutral, for 415V, 50hz supply with complete in-
phase monitor and On-line maintenance bypass isolation switch, tested for short time WCR of 42KA for 18 cycles & 100KA for 3 cycles as per UL-1008
With Indicating Lamps & Micro Processor controller etc. complete as required.- 3 Set
0 0
ii) 3 Set of three phase indicating lamps along with 2A SP MCB backup protection. 0 0
Bus Bar : 0 0
Electrolytic high conductivity Aluminium extensible three phase and neutral busbars rated at 2000 amps , & auxiliary Bus Bars of suitable capacity
insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints having a maximum current density as per Indian standards suitable to
with stand symmetrical fault level of 35 kA at 433 volts i/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports &
their spacing etc. The neutral busbar is to be of full capacity.
0 0
Outgoings: 0 0
A All MCCB (Ics=lcu) with microprocessor release with O/L, S/C & earth fault protection & followings shall be applicable to each. 0 0
All outgoing with microprocessor based release MCCB for O/C, S/C & earth fault protection of following capacity and rating, 35 KA (Ics=Icu upto 433 V )
with Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0 accuracy , showing V, A, KW
with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 5 VA Class 1.0 metering. , Spreader links and phase barrier, solid
neutral link complete with wiring , connections etc.
0 0
i) 11 Nos. - 160 Amp. TPN 35kA MCCB ( Floor Power Panels & spares ) 0 0
ii) 3 Nos. - 100 Amp. TPN 35kA MCCB ( Floor Power Panels & spares ) 0 0
The Switchboard panel shall be complete with all interconnections, risers, internal wiring, labels, control/circuit fuses etc. complete as required.
0 0
MAIN POWER PANEL (T-3 BASEMENT) AS ABOVE 1 Set
822.00 MAIN AHU PANEL item1064 0 0
Incomers: 0 0
i) 1600 Amp. 4 Pole ACB - 2 set 0 0
Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu=Icw) Electrical Draw Out Motorised operated, fitted with interlocked
door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS/IEC-
60947 as amended up-to-date complete with Independent Electrical & manual spring closing mechanism, Microprocessor release (EMI & EMC certified)
for over current, earth fault & short circuit protection, Shunt trip coil 24V D.C / 220V A.C, Breaker Control Switch - 16A, Test terminal block set, circuits as
per standard practice, auxiliary contactors with contacts (minimum 4NO+4NC) for positive interlocking of the breakers, necessary electrical interlocking.
as required including following accessories and suitable terminals to receive bus duct connections.
0 0
LED indication lamps for RYB, breaker 'ON/ OFF/ TRIP', spring charged, DC control supply healthy etc. with 2Amp control MCBs 0 0
Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) 0- 1600A, class - 1.0 accuracy , showing V, A, PF, Hz, KW,
KWH, KVAR , Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of 1600/5 Amp ratio, 15 VA Class 1.0 metering.
0 0
Microprocessor release/s based relay/s (EMI & EMC certified) for over current, earth fault & short circuit protection, Under voltage with definite time
,Trip ckt. supervision, Master trip relays along with dual core CT of current transformers of 1600/5A ratio, 15 VA class-5P10 protection - 1 set.
0 0
Terminals to receive 1600A Al. Bus duct suitable & complete required as per site 0 0
Bus Bar : 0 0
2 Sections of Electrolytic high conductivity Aluminium extensible three phase and neutral busbars rated at 1600 amps , & auxiliary Bus Bars of suitable
capacity insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints having a maximum current density as per Indian standards
suitable to with stand symmetrical fault level of 50 kA at 433 volts i/c DMC/SMC bus bars supports at required intervals complete for cross section, size
supports & their spacing etc. The neutral busbar is to be of full capacity.
0 0
Bus couplers 0 0
1600 Amp 4 pole ACB - 1 set. 0 0
a)Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu =Icw) upto 433V) Electrical Draw Out Motorised operated, fitted
with interlocked door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact,
conforming to IS/IEC-60947 as amended up-to-date complete with following accessories for each ACB.
0 0
b) Independent Electrical / manual spring closing mechanism - I No. 0 0
c) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB, test terminal block set, circuits as per
standard practice, auxiliary contacts for positive interlocking of the breakers as required.
0 0
Interlocking: 0 0
Electrical Interlocking through advance contacts / contactors in MCCB/ACB's (Incomers & Bus couplers) should be provided to ensure that only one
supply is available at a time and to eliminate any possibility of accidentally approaching two supplies at one bus section as per single line diagram
enclosed.
0 0
Outgoings: 0 0
A All MCCB (Ics=lcu) with microprocessor release with O/L, S/C & earth fault protection & followings shall be applicable to each. 0 0
All outgoing with microprocessor based release MCCB for O/C, S/C & earth fault protection of following capacity and rating, 35 KA (Ics=Icu upto 433 V )
with Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0 accuracy , showing V, A, KW
with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 5 VA Class 1.0 metering. , Spreader links and phase barrier, solid
neutral link complete with wiring , connections etc.
0 0
i) 12 Nos. - 250 Amp. TPN 35kA MCCB ( Floor AHU Panels & spares ) 0 0
ii) 7 Nos. - 160/200 Amp. TPN 35kA MCCB ( Floor AHU Panels & spares ) 0 0
iii) 8 Nos. - 100 Amp. TPN 35kA MCCB ( Floor AHU Panels & spares ) 0 0
Necessary interlocking 2 Nos. Incomers shall be successfully operational in all possible combinations. 0 0
The Switchboard panel shall be complete with all interconnections, risers, internal wiring, labels, control/circuit fuses etc. complete as required.
0 0
MAIN AHU PANEL (T-3 BASEMENT) AS ABOVE 1 Set
823.00 MAIN SMOKE EXT. PANEL item1065 0 0
Incomers: 0 0
i) 2500 Amp. 4 Pole ACB - 1 set 0 0
Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu=Icw) Electrical Draw Out Motorised operated, fitted with interlocked
door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS/IEC-
60947 as amended up-to-date complete with Independent Electrical & manual spring closing mechanism, Microprocessor release (EMI & EMC certified)
for over current, earth fault & short circuit protection, Shunt trip coil 24V D.C / 220V A.C, Breaker Control Switch - 16A, Test terminal block set, circuits as
per standard practice, auxiliary contactors with contacts (minimum 4NO+4NC) for positive interlocking of the breakers, necessary electrical interlocking.
as required including following accessories and suitable terminals to receive bus duct connections.
0 0
LED indication lamps for RYB, breaker 'ON/ OFF/ TRIP', spring charged, DC control supply healthy etc. with 2Amp control MCBs 0 0
Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) 0- 2500A, class - 1.0 accuracy , showing V, A,KW with 3
Nos. cast resin current transformers of dual core CT's of 2500/5 Amp ratio, 15 VA Class 1.0 metering.
0 0
Microprocessor release/s based relay/s (EMI & EMC certified) for over current, earth fault & short circuit protection, Under voltage with definite time
,Trip ckt. supervision, Master trip relays along with dual core CT of current transformers of 2500/5A ratio, 15 VA class-5P10 protection - 1 set.
0 0
Terminals to receive 2500A Al. Bus duct suitable & complete required as per site 0 0
2500A, 4P ATS (Automatic Transfer Switch) Stand-Alone with By-Pass arrangement With Over lapping Neutral, for 415V, 50hz supply with complete in-
phase monitor and On-line maintenance bypass isolation switch, tested for short time WCR of 42KA for 18 cycles & 100KA for 3 cycles as per UL-1008
With Indicating Lamps & Micro Processor controller etc. complete as required.- 3 Set
0 0
ii) 3 Set of three phase indicating lamps along with 2A SP MCB backup protection. 0 0
Bus Bar : 0 0
Electrolytic high conductivity Aluminium extensible three phase and neutral busbars rated at 2500 amps , & auxiliary Bus Bars of suitable capacity
insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints having a maximum current density as per Indian standards suitable to
with stand symmetrical fault level of 50 kA at 433 volts i/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports &
their spacing etc. The neutral busbar is to be of full capacity.
0 0
Outgoings: 0 0
A All MCCB (Ics=lcu) with microprocessor release with O/L, S/C & earth fault protection & followings shall be applicable to each. 0 0
All outgoing with microprocessor based release MCCB for O/C, S/C & earth fault protection of following capacity and rating, 35 KA (Ics=Icu upto 433 V )
with Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0 accuracy , showing V, A, KW
with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 5 VA Class 1.0 metering. , Spreader links and phase barrier, solid
neutral link complete with wiring , connections etc.
0 0
i) 5 Nos. - 630 Amp. TPN 35kA MCCB ( Floor Smoke ext. Panels & spares ) 0 0
ii) 3 Nos. - 400 Amp. TPN 35kA MCCB ( Floor Smoke ext. Panels & spares ) 0 0
iii) 3 Nos. - 250 Amp. TPN 35kA MCCB ( Floor Smoke ext. Panels & spares ) 0 0
iv) 7 Nos. - 160 Amp. TPN 35kA MCCB ( Floor Smoke ext. Panels & spares ) 0 0
v) 3 Nos. - 100 Amp. TPN 35kA MCCB ( Floor Smoke ext. Panels & spare ) 0 0
The Switchboard panel shall be complete with all interconnections, risers, internal wiring, labels, control/circuit fuses etc. complete as required.
0 0
MAIN SMOKE EXT. PANEL (T-3 BASEMENT) AS ABOVE 1 Set
824.00 MAIN BHS PANEL item1066 0 0
Incomers: 0 0
i) 800 Amp. 4 Pole ACB - 1 set 0 0
Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu=Icw) Electrical Draw Out Motorised operated, fitted with interlocked
door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS/IEC-
60947 as amended up-to-date complete with Independent Electrical & manual spring closing mechanism, Microprocessor release (EMI & EMC certified)
for over current, earth fault & short circuit protection, Shunt trip coil 24V D.C / 220V A.C, Breaker Control Switch - 16A, Test terminal block set, circuits as
per standard practice, auxiliary contactors with contacts (minimum 4NO+4NC) for positive interlocking of the breakers, necessary electrical interlocking.
as required including following accessories and suitable terminals to receive bus duct connections.
0 0
LED indication lamps for RYB, breaker 'ON/ OFF/ TRIP', spring charged, DC control supply healthy etc. with 2Amp control MCBs 0 0
Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) 0- 800A, class - 1.0 accuracy , showing V, A,KW with 3 Nos.
cast resin current transformers of dual core CT's of 800/5 Amp ratio, 15 VA Class 1.0 metering.
0 0
Microprocessor release/s based relay/s (EMI & EMC certified) for over current, earth fault & short circuit protection, Under voltage with definite time
,Trip ckt. supervision, Master trip relays along with dual core CT of current transformers of 800/5A ratio, 15 VA class-5P10 protection - 1 set.
0 0
Terminals to receive 800A Al. Bus duct suitable & complete required as per site 0 0
800A, 4P ATS (Automatic Transfer Switch) Stand-Alone with By-Pass arrangement With Over lapping Neutral, for 415V, 50hz supply with complete in-
phase monitor and On-line maintenance bypass isolation switch, tested for short time WCR of 36KA for 18 cycles & 50KA for 3 cycles as per UL-1008 With
Indicating Lamps & Micro Processor controller etc. complete as required.- 3 Set
0 0
ii) 3 Set of three phase indicating lamps along with 2A SP MCB backup protection. 0 0
Bus Bar : 0 0
Electrolytic high conductivity Aluminium extensible three phase and neutral busbars rated at 1000 amps , & auxiliary Bus Bars of suitable capacity
insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints having a maximum current density as per Indian standards suitable to
with stand symmetrical fault level of 50 kA at 433 volts i/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports &
their spacing etc. The neutral busbar is to be of full capacity.
0 0
Outgoings: 0 0
A All MCCB (Ics=lcu) with microprocessor release with O/L, S/C & earth fault protection & followings shall be applicable to each. 0 0
All outgoing with microprocessor based release MCCB for O/C, S/C & earth fault protection of following capacity and rating, 35 KA (Ics=Icu upto 433 V )
with Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0 accuracy , showing V, A, KW
with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 5 VA Class 1.0 metering. , Spreader links and phase barrier, solid
neutral link complete with wiring , connections etc.
0 0
i) 3 Nos. - 250 Amp. TPN 35kA MCCB ( Floor BHS panels & spares ) 0 0
ii) 4 Nos. - 100 Amp. TPN 35kA MCCB ( Floor BHS panels & spares ) 0 0
iii) 2 Nos. - 400 Amp. TPN 35kA MCCB ( Floor BHS panels & spares ) 0 0
The Switchboard panel shall be complete with all interconnections, risers, internal wiring, labels, control/circuit fuses etc. complete as required.
0 0
MAIN BHS PANEL (T-3 BASEMENT) AS ABOVE 1 Set
825.00 MAIN LIFTS & ESC. PANEL item1067 0 0
Incomers: 0 0
i) 1250 Amp. 4 Pole ACB - 1 set 0 0
Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu=Icw) Electrical Draw Out Motorised operated, fitted with interlocked
door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS/IEC-
60947 as amended up-to-date complete with Independent Electrical & manual spring closing mechanism, Microprocessor release (EMI & EMC certified)
for over current, earth fault & short circuit protection, Shunt trip coil 24V D.C / 220V A.C, Breaker Control Switch - 16A, Test terminal block set, circuits as
per standard practice, auxiliary contactors with contacts (minimum 4NO+4NC) for positive interlocking of the breakers, necessary electrical interlocking.
as required including following accessories and suitable terminals to receive bus duct connections.
0 0
LED indication lamps for RYB, breaker 'ON/ OFF/ TRIP', spring charged, DC control supply healthy etc. with 2Amp control MCBs 0 0
Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) 0- 1250A, class - 1.0 accuracy , showing V, A, PF, Hz, KW,
KWH, KVAR , Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of 1250/5 Amp ratio, 15 VA Class 1.0 metering.
0 0
Microprocessor release/s based relay/s (EMI & EMC certified) for over current, earth fault & short circuit protection, Under voltage with definite time
,Trip ckt. supervision, Master trip relays along with dual core CT of current transformers of 1250/5A ratio, 15 VA class-5P10 protection - 1 set.
0 0
Terminals to receive 1250A Al. Bus duct suitable & complete required as per site 0 0
1250A, 4P ATS (Automatic Transfer Switch) Stand-Alone with By-Pass arrangement With Over lapping Neutral, for 415V, 50hz supply with complete in-
phase monitor and On-line maintenance bypass isolation switch, tested for short time WCR of 36KA for 18 cycles & 50KA for 3 cycles as per UL-1008 With
Indicating Lamps & Micro Processor controller etc. complete as required.- 3 Set
0 0
ii) 3 Set of three phase indicating lamps along with 2A SP MCB backup protection. 0 0
Bus Bar : 0 0
Electrolytic high conductivity Aluminium extensible three phase and neutral busbars rated at 1500 amps , & auxiliary Bus Bars of suitable capacity
insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints having a maximum current density as per Indian standards suitable to
with stand symmetrical fault level of 50 kA at 433 volts i/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports &
their spacing etc. The neutral busbar is to be of full capacity.
0 0
Outgoings: 0 0
A All MCCB (Ics=lcu) with microprocessor release with O/L, S/C & earth fault protection & followings shall be applicable to each. 0 0
All outgoing with microprocessor based release MCCB for O/C, S/C & earth fault protection of following capacity and rating, 35 KA (Ics=Icu upto 433 V )
with Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0 accuracy , showing V, A, PF,
KW, KWH Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 5 VA Class 1.0 metering. , Spreader
links and phase barrier, solid neutral link complete with wiring , connections etc.
0 0
i) 6 Nos. - 400 Amp. TPN 35kA MCCB ( Floor Panels & Spare ) 0 0
ii) 2 Nos. - 63 Amp. TPN 35kA MCCB ( Floor Panels & Spare ) 0 0
The Switchboard panel shall be complete with all interconnections, risers, internal wiring, labels, control/circuit fuses etc. complete as required.
0 0
MAIN LIFT & ESC. PANEL (T-3 BASEMENT) AS ABOVE 1 Set
826.00 MAIN RETAIL METER BOARDS PANEL item1068 0 0
Incomers: 0 0
i) 1000 Amp. 4 Pole ACB - 1 set 0 0
Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu=Icw) Electrical Draw Out Motorised operated, fitted with interlocked
door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS/IEC-
60947 as amended up-to-date complete with Independent Electrical & manual spring closing mechanism, Microprocessor release (EMI & EMC certified)
for over current, earth fault & short circuit protection, Shunt trip coil 24V D.C / 220V A.C, Breaker Control Switch - 16A, Test terminal block set, circuits as
per standard practice, auxiliary contactors with contacts (minimum 4NO+4NC) for positive interlocking of the breakers, necessary electrical interlocking.
as required including following accessories and suitable terminals to receive bus duct connections.
0 0
LED indication lamps for RYB, breaker 'ON/ OFF/ TRIP', spring charged, DC control supply healthy etc. with 2Amp control MCBs 0 0
Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) 0- 1000A, class - 1.0 accuracy , showing V, A, PF, Hz, KW,
KWH, KVAR , Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of 1000/5 Amp ratio, 15 VA Class 1.0 metering.
0 0
Microprocessor release/s based relay/s (EMI & EMC certified) for over current, earth fault & short circuit protection, Under voltage with definite time
,Trip ckt. supervision, Master trip relays along with dual core CT of current transformers of 1000/5A ratio, 15 VA class-5P10 protection - 1 set.
0 0
Terminals to receive 1000A Al. Bus duct suitable & complete required as per site 0 0
1000A, 4P ATS (Automatic Transfer Switch) Stand-Alone with By-Pass arrangement With Over lapping Neutral, for 415V, 50hz supply with complete in-
phase monitor and On-line maintenance bypass isolation switch, tested for short time WCR of 36KA for 18 cycles & 50KA for 3 cycles as per UL-1008 With
Indicating Lamps & Micro Processor controller etc. complete as required.- 3 Set
0 0
ii) 3 Set of three phase indicating lamps along with 2A SP MCB backup protection. 0 0
Bus Bar : 0 0
Electrolytic high conductivity Aluminium extensible three phase and neutral busbars rated at 1200 amps , & auxiliary Bus Bars of suitable capacity
insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints having a maximum current density as per Indian standards suitable to
with stand symmetrical fault level of 50 kA at 433 volts i/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports &
their spacing etc. The neutral busbar is to be of full capacity.
0 0
Outgoings: 0 0
A All MCCB (Ics=lcu) with microprocessor release with O/L, S/C & earth fault protection & followings shall be applicable to each. 0 0
All outgoing with microprocessor based release MCCB for O/C, S/C & earth fault protection of following capacity and rating, 35 KA (Ics=Icu upto 433 V )
with Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0 accuracy , showing V, A, KW
with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 5 VA Class 1.0 metering. , Spreader links and phase barrier, solid
neutral link complete with wiring , connections etc.
0 0
i) 3 Nos. - 250 Amp. TPN 35kA MCCB ( Retail Meter Board Panels & Spares ) 0 0
ii) 4 Nos. - 400 Amp. TPN 35kA MCCB ( Retail Meter Board Panels & Spares ) 0 0
The Switchboard panel shall be complete with all interconnections, risers, internal wiring, labels, control/circuit fuses etc. complete as required.
0 0
MAIN RETAIL METER BOARDS PANEL (T-3 BASEMENT) AS ABOVE 1 Set
827.00 MAIN PBB PANEL item1069 0 0
Incomers: 0 0
i) 1000 Amp. 4 Pole ACB - 2 set 0 0
Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu=Icw) Electrical Draw Out Motorised operated, fitted with interlocked
door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS/IEC-
60947 as amended up-to-date complete with Independent Electrical & manual spring closing mechanism, Microprocessor release (EMI & EMC certified)
for over current, earth fault & short circuit protection, Shunt trip coil 24V D.C / 220V A.C, Breaker Control Switch - 16A, Test terminal block set, circuits as
per standard practice, auxiliary contactors with contacts (minimum 4NO+4NC) for positive interlocking of the breakers, necessary electrical interlocking.
as required including following accessories and suitable terminals to receive bus duct connections.
0 0
LED indication lamps for RYB, breaker 'ON/ OFF/ TRIP', spring charged, DC control supply healthy etc. with 2Amp control MCBs 0 0
Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) 0- 1000A, class - 1.0 accuracy , showing V, A, PF, Hz, KW,
KWH, KVAR , Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of 1000/5 Amp ratio, 15 VA Class 1.0 metering.
0 0
Microprocessor release/s based relay/s (EMI & EMC certified) for over current, earth fault & short circuit protection, Under voltage with definite time
,Trip ckt. supervision, Master trip relays along with dual core CT of current transformers of 1000/5A ratio, 15 VA class-5P10 protection - 1 set.
0 0
Terminals to receive 1000A Al. Bus duct suitable & complete required as per site 0 0
Bus Bar : 0 0
2 Sections of Electrolytic high conductivity Aluminium extensible three phase and neutral busbars rated at 1200 amps , & auxiliary Bus Bars of suitable
capacity insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints having a maximum current density as per Indian standards
suitable to with stand symmetrical fault level of 50 kA at 433 volts i/c DMC/SMC bus bars supports at required intervals complete for cross section, size
supports & their spacing etc. The neutral busbar is to be of full capacity.
0 0
Bus couplers 0 0
1000 Amp 4 pole ACB - 1 set. 0 0
a)Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu =Icw) upto 433V) Electrical Draw Out Motorised operated, fitted
with interlocked door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact,
conforming to IS/IEC-60947 as amended up-to-date complete with following accessories for each ACB.
0 0
b) Independent Electrical / manual spring closing mechanism - I No. 0 0
c) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB, test terminal block set, circuits as per
standard practice, auxiliary contacts for positive interlocking of the breakers as required.
0 0
Interlocking: 0 0
Electrical Interlocking through advance contacts / contactors in MCCB/ACB's (Incomers & Bus couplers) should be provided to ensure that only one
supply is available at a time and to eliminate any possibility of accidentally approaching two supplies at one bus section as per single line diagram
enclosed.
0 0
Outgoings: 0 0
A All MCCB (Ics=lcu) with microprocessor release with O/L, S/C & earth fault protection & followings shall be applicable to each. 0 0
All outgoing with microprocessor based release MCCB for O/C, S/C & earth fault protection of following capacity and rating, 35 KA (Ics=Icu upto 433 V )
with Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0 accuracy , showing V, A, KW
with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 5 VA Class 1.0 metering. , Spreader links and phase barrier, solid
neutral link complete with wiring , connections etc.
0 0
i) 8 Nos. - 400 Amp. TPN 35kA MCCB ( Floor PBB Panels & spares ) 0 0
Necessary interlocking 2 Nos. Incomers shall be successfully operational in all possible combinations. 0 0
The Switchboard with Logic control panel shall be complete with all interconnections, risers, internal wiring, labels, control/circuit fuses etc. complete as
required.
0 0
MAIN PBB PANEL (T-3 BASEMENT) AS ABOVE 1 Set
828.00 UPS INPUT PANEL item1070 0 0
Incomers: 0 0
i) 1600 Amp. 4 Pole ACB - 2 set 0 0
Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu=Icw) Electrical Draw Out Motorised operated, fitted with interlocked
door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS/IEC-
60947 as amended up-to-date complete with Independent Electrical & manual spring closing mechanism, Microprocessor release (EMI & EMC certified)
for over current, earth fault & short circuit protection, Shunt trip coil 24V D.C / 220V A.C, Breaker Control Switch - 16A, Test terminal block set, circuits as
per standard practice, auxiliary contactors with contacts (minimum 4NO+4NC) for positive interlocking of the breakers, necessary electrical interlocking.
as required including following accessories and suitable terminals to receive bus duct connections.
0 0
LED indication lamps for RYB, breaker 'ON/ OFF/ TRIP', spring charged, DC control supply healthy etc. with 2Amp control MCBs 0 0
Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) 0- 1600A, class - 1.0 accuracy , showing V, A, PF, Hz, KW,
KWH, KVAR , Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of 1600/5 Amp ratio, 15 VA Class 1.0 metering.
0 0
Microprocessor release/s based relay/s (EMI & EMC certified) for over current, earth fault & short circuit protection, Under voltage with definite time
,Trip ckt. supervision, Master trip relays along with dual core CT of current transformers of 1600/5A ratio, 15 VA class-5P10 protection - 1 set.
0 0
Terminals to receive 1600A Al. Bus duct/Cables suitable & complete required as per site 0 0
Bus Bar : 0 0
2 Sections of Electrolytic high conductivity Aluminium extensible three phase and 200 % neutral busbars rated at 2000 amps , & auxiliary Bus Bars of
suitable capacity insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints having a maximum current density as per Indian
standards suitable to with stand symmetrical fault level of 50 kA at 433 volts i/c DMC/SMC bus bars supports at required intervals complete for cross
section, size supports & their spacing etc. The neutral busbar is to be of full capacity.
0 0
Bus couplers 0 0
1600 Amp 4 pole ACB - 1 set. 0 0
a)Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu =Icw) upto 433V) Electrical Draw Out Motorised operated, fitted
with interlocked door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact,
conforming to IS/IEC-60947 as amended up-to-date complete with following accessories for each ACB.
0 0
b) Independent Electrical / manual spring closing mechanism - I No. 0 0
c) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB, test terminal block set, circuits as per
standard practice, auxiliary contacts for positive interlocking of the breakers as required.
0 0
Interlocking: 0 0
Electrical Interlocking through advance contacts / contactors in MCCB/ACB's (Incomers & Bus couplers) should be provided to ensure that only one
supply is available at a time and to eliminate any possibility of accidentally approaching two supplies at one bus section as per single line diagram
enclosed.
0 0
Outgoings: 0 0
A All MCCB (Ics=lcu) with microprocessor release with O/L, S/C & earth fault protection & followings shall be applicable to each. 0 0
All outgoing with microprocessor based release MCCB for O/C, S/C & earth fault protection of following capacity and rating, 35 KA (Ics=Icu upto 433 V )
with Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0 accuracy , showing V, A, KW
with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 5 VA Class 1.0 metering. , Spreader links and phase barrier, solid
neutral link complete with wiring , connections etc.
0 0
i) 6 Nos. - 400 Amp. TPN 35kA MCCB ( UPS Output Panels & spares ) 0 0
Necessary interlocking 2 Nos. Incomers shall be successfully operational in all possible combinations. 0 0
The Switchboard with Logic control panel shall be complete with all interconnections, risers, internal wiring, labels, control/circuit fuses etc. complete as
required.
0 0
UPS INPUT PANEL (T-3 BASEMENT) AS ABOVE 1 Set
829.00 Capacitor Panels item1071 0 0
Incomers: 0 0
1000 kVAR HYBRID CAPACITOR PANEL for 2000KVA Transformer 0 0
Design, fabrication, assembly, wiring, supply, erection , testing and commissioning of Hybrid Solution to achieve 0.99 Lag and THDI / THD V less than
5%.The Solution should have an incomer of ACB as specified below, 433V, +/ 10 % 50Hz, 3 phase, 50KA , 3 Phase, 3 Wire System. The enclosure system
shall be of certified design as per IEC 62208 and IS 16636. The enclosure system should have a minimum of IK 10 certification (external mechanical
impacts) in accordance with IEC 62262. The degree of protection of enclosures system shall be IP42 or as per manufacturer, in accordance with IEC
60529.The switching device of the active compensation system shall be IGBT based. The active compensation system should be certified by a third party
UL or Equ. The active compensation system should filter harmonics from 2nd to 51st individual harmonic order and shall be selectable for the entire
range. The active compensation system should have feature to improve PF correction as well. The active compensation system should have a Multi
master and Master Slave operation. The active compensation system should have Target Settable feature of THDI and THD V%. The active compensation
system shall have Auto disconnection feature if ambient temperature exceeds 50 Deg C. Response time shall be 25 micro Sec. The switching device of the
passive compensation system shall be Thyristor Based. The capacitor bank shall compromise of capacitor units, de tuning reactors, PF controllers, circuit
breakers etc.
0 0
The PF controller shall be microprocessor based and shall be able to sense the reactive current requirement of the network and shall switch ON / OFF the
required stages of a capacitor bank. The Capacitor Bank shall be of type tested design as IS 16636.
0 0
The capacitor units shall be rated at 525 V. The capacitor and reactor combination represents a series resonant circuit. The circuit should be tuned such
that the series resonant frequency should be below the lowest harmonic order expected to be present in the electrical network. If the lowest harmonic
order expected to be present in the electrical network is likely to the 150Hz (3rd order harmonics) then the series de-tuning reactors should be of 135Hz (
2.7 tuning order) with a relative impedance 14%.
0 0
The Hybrid Solution should comprise of Active filter i.e. 700A and Passive i.e.( 500kVAr. Incomer should be 2000A, 50kA ACB.
The Active harmonic filtershall be 2 nos of 350A (or as per manufacturer).
· The de-tuned capacitor bank should have the following step ratings: 2 x 50 + 4 x 100kVAr. Integrated DSP controller which shall control both the
capacitors as well as Active Filter.(or as per panel manufacturer) . Capacitor shall be as per MPP low loss as per standards.
· Each stage of the capacitor bank should have suitable overload and short circuit protection.
· The Solution should have surge arrestors and over temperature protection.
0 0
The system should be with compatible with Grid Power OR D.G. Power Supply. 0 0
The capacitor banks should be of type tested design and temperature rise test report of the capacitor bank performed at an independent laboratory
should be submitted along with the offer.
0 0
The Hybrid Solution described as above complete in all respect as per specification enclosed, up to the entire satisfaction of engineer In Charge. The OEM
shall preferably manufacturer PFC components and switchgear. Switchgears shall be as per followings and as per specifications.
0 0
i) 2000 Amp.TP ACB - 1 set 0 0
Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu=Icw) Electrical Draw Out Motorised operated, fitted with interlocked
door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS/IEC-
60947 as amended up-to-date complete with Independent Electrical & manual spring closing mechanism, Microprocessor release (EMI & EMC certified)
for over current, earth fault & short circuit protection, Shunt trip coil 24V D.C / 220V A.C, Breaker Control Switch - 16A, Test terminal block set, circuits as
per standard practice, auxiliary contactors with contacts (minimum 4NO+4NC) for positive interlocking of the breakers, necessary electrical interlocking
with PLC auto controls etc. as required including following accessories and suitable to receive bus duct connections.
0 0
LED indication lamps for RYB, breaker 'ON/ OFF/ TRIP', spring charged, DC control supply healthy etc. with 2Amp control MCBs 0 0
Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) 0- 2000A, class - 1.0 accuracy , showing V, A, PF, Hz, KW,
KWH, KVAR , Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of 2000/5 Amp ratio, 15 VA Class 1.0 metering.
0 0
Microprocessor release/s based relay/s (EMI & EMC certified) for over current, earth fault & short circuit protection, Under voltage with definite time
,Trip ckt. supervision, Master trip relays along with dual core CT of current transformers of 2000/5A ratio, 15 VA class-5P10 protection - 1 set.
0 0
Terminals to receive 2000A Al. Bus duct suitable & complete required as per site. 0 0
Bus Bar : 0 0
Electrolytic high conductivity Aluminium extensible three phase and neutral busbars rated at 2000 amps , & auxiliary Bus Bars of suitable capacity
insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints having a maximum current density as per Indian standards suitable to
with stand symmetrical fault level of 50 kA at 433 volts i/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports &
their spacing etc. The neutral busbar is to be of full capacity.
0 0
ii) MCCB 0 0
800A Microprocessor based release TP MCCB for O/C, S/C & earth fault protection of following capacity and rating, 35 KA (Ics=Icu upto 433 V ) with Set
of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0 accuracy , showing V, A, PF, KW, KWH
Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 15 VA Class 1.0 metering. , Spreader links
and phase barrier, solid neutral link complete with wiring , connections etc.
0 0
CAPACITOR PANEL (HVAC/SERVICE YARD) AS ABOVE 3 Set
830.00 1200kVAR HYBRID CAPACITOR PANEL for 2500KVA Transformer item1072 0 0
The Hybrid Solution should comprise of Active filter i.e. 840A and Passive i.e. (600 kVAr.) Incomer should be 2500A, 50kA, ACB.
·The Active harmonic filtershall be 3 nos of 280A (or as per manufacturer). Integrated DSP controller which shall control both the
capacitors as well as Active Filter.(or as per panel manufacturer)
· The de-tuned capacitor bank should have the following step ratings: 4 x 50 + 4 x 100kVAr. Capacitor shall be as per MPP low loss as per standards.
· Each stage of the capacitor bank should have suitable overload and short circuit protection.
· The Solution should have surge arrestors and over temperature protection.
0 0
The system should be with compatible with Grid Power OR D.G. Power Supply. 0 0
The capacitor banks should be of type tested design and temperature rise test report of the capacitor bank performed at an independent laboratory
should be submitted along with the offer.
0 0
The Hybrid Solution described as above complete in all respect as per specification enclosed, up to the entire satisfaction of engineer In Charge. The OEM
shall preferably manufacturer PFC components and switchgear. Switchgears shall be as per followings and as per specifications.
0 0
i) 2500 Amp.TP ACB - 1 set 0 0
Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu=Icw) Electrical Draw Out Motorised operated, fitted with interlocked
door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS/IEC-
60947 as amended up-to-date complete with Independent Electrical & manual spring closing mechanism, Microprocessor release (EMI & EMC certified)
for over current, earth fault & short circuit protection, Shunt trip coil 24V D.C / 220V A.C, Breaker Control Switch - 16A, Test terminal block set, circuits as
per standard practice, auxiliary contactors with contacts (minimum 4NO+4NC) for positive interlocking of the breakers, necessary electrical interlocking
with PLC auto controls etc. as required including following accessories and suitable to receive bus duct connections.
0 0
LED indication lamps for RYB, breaker 'ON/ OFF/ TRIP', spring charged, DC control supply healthy etc. with 2Amp control MCBs 0 0
Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) 0- 2500A, class - 1.0 accuracy , showing V, A, PF, Hz, KW,
KWH, KVAR , Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of 2500/5 Amp ratio, 15 VA Class 1.0 metering.
0 0
Microprocessor release/s based relay/s (EMI & EMC certified) for over current, earth fault & short circuit protection, Under voltage with definite time
,Trip ckt. supervision, Master trip relays along with dual core CT of current transformers of 2500/5A ratio, 15 VA class-5P10 protection - 1 set.
0 0
Terminals to receive 2500A Al. Bus duct suitable & complete required as per site. 0 0
Bus Bar : 0 0
Electrolytic high conductivity Aluminium extensible three phase and neutral busbars rated at 2500 amps , & auxiliary Bus Bars of suitable capacity
insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints having a maximum current density as per Indian standards suitable to
with stand symmetrical fault level of 50 kA at 433 volts i/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports &
their spacing etc. The neutral busbar is to be of full capacity.
0 0
ii) MCCB 0 0
1000A Microprocessor based release TP MCCB for O/C, S/C & earth fault protection of following capacity and rating, 35 KA (Ics=Icu upto 433 V ) with Set
of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0 accuracy , showing V, A, PF, KW, KWH
Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 15 VA Class 1.0 metering. , Spreader links
and phase barrier, solid neutral link complete with wiring , connections etc.
0 0
CAPACITOR PANEL (T-3 BASEMENT) AS ABOVE 2 Set
831.00 400kVAR CAPACITOR PANEL For Stand by Transformers item1073 0 0.00
The Solution should comprise (400 kVAr including Detuned filter reactors) Incomer should be 1000A, 50kA, ACB.
· The de-tuned capacitor bank should have the following step ratings: 4 x 50 + 2 x 100kVAr. Capacitor shall be as per MPP low loss as per standards.
· Each stage of the capacitor bank should have suitable overload and short circuit protection.
· The Solution should have surge arrestors and over temperature protection.
0 0.00
The system should be with compatible with Grid Power OR D.G. Power Supply. 0 0.00
The capacitor banks should be of type tested design and temperature rise test report of the capacitor bank performed at an independent laboratory
should be submitted along with the offer.
0 0.00
The Solution described as above complete in all respect as per specification enclosed, up to the entire satisfaction of engineer In Charge. The OEM shall
preferably manufacturer PFC components and switchgear. Switchgears shall be as per followings and as per specifications.
0 0.00
i) 1000 Amp.TP ACB - 1 set 0 0.00
Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu=Icw) Electrical Draw Out Motorised operated, fitted with interlocked
door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS/IEC-
60947 as amended up-to-date complete with Independent Electrical & manual spring closing mechanism, Microprocessor release (EMI & EMC certified)
for over current, earth fault & short circuit protection, Shunt trip coil 24V D.C / 220V A.C, Breaker Control Switch - 16A, Test terminal block set, circuits as
per standard practice, auxiliary contactors with contacts (minimum 4NO+4NC) for positive interlocking of the breakers, necessary electrical interlocking
with PLC auto controls etc. as required including following accessories and suitable to receive bus duct connections.
0 0.00
LED indication lamps for RYB, breaker 'ON/ OFF/ TRIP', spring charged, DC control supply healthy etc. with 2Amp control MCBs 0 0.00
Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) 0- 1000A, class - 1.0 accuracy , showing V, A, PF, Hz, KW,
KWH, KVAR , Total harmonic distortion with 3 Nos. cast resin current transformers of dual core CT's of 1000/5 Amp ratio, 15 VA Class 1.0 metering.
0 0.00
Microprocessor release/s based relay/s (EMI & EMC certified) for over current, earth fault & short circuit protection, Under voltage with definite time
,Trip ckt. supervision, Master trip relays along with dual core CT of current transformers of 1000/5A ratio, 15 VA class-5P10 protection - 1 set.
0 0.00
Terminals to receive 1000A Al. Bus duct suitable & complete required as per site. 0 0.00
Bus Bar : 0 0.00
Electrolytic high conductivity Aluminium extensible three phase and neutral busbars rated at 1200 amps , & auxiliary Bus Bars of suitable capacity
insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints having a maximum current density as per Indian standards suitable to
with stand symmetrical fault level of 50 kA at 433 volts i/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports &
their spacing etc. The neutral busbar is to be of full capacity.
0 0.00
CAPACITOR PANEL AS ABOVE 2 Set
832.00 FRONT OPERATED PANELS item1074
Supply, installation, testing and commissioning of dust, damp and vermin proof cubicle free floor, indoor type factory built sheet steel enclosed modular
bolted construction extendable Front operated Panel, suitable for operation on 415 ±10% volts, 50 Hz AC 3 phase 4 wire supply system fabricated out of
Form 3b compartmentalised design IP-43 and covered with CRCA sheet steel of 2mm thick for frame work and 1.6mm thick for doors/ covers, 3mm thick
for gland plates i/c cleaning & finishing complete with 9 tank process for powder coating in approved shade, having extensible type TPN Aluminium bus
bars of high conductivity, DMC/SMC bus bar supports, bottom base channel of section not less than ISMC 75mm, fabrication shall be done in
transportable sections, entire panel shall have a common tinned copper earth bar of suitable size with 2 nos earth studs, including control wiring with
1.5sqmm. PVC insulated FRLS copper conductor Single Core cable for voltage & 2.5sq.mm for current circuits, cable alleys, cable gland plates in two half,
danger notice plates, etc. necessary metering protections & indications and mounted with the following switch gears as per drawing and technical
specifications etc. complete as required. The Panel shall be TTA assembly as per IEC 61439.
Each Panel Shall be equipped with Automatic fire suppression system, suitable for the panel size accordance with the electrical specifications, NEC-
2011,NBC ammended up to date. All panel incomers shall be with microprocessor based unless otherwise specified.
0 0
832.01 UPS OUTPUT PANEL item1075 0 0
Incomers: 0 0
i)400 Amp. 4 Pole MCCB - 4 set 0 0
All outgoing with microprocessor based release MCCB for O/C, S/C & earth fault protection front operating handle of following capacity and rating, 35 KA
(Ics=Icu upto 433 V ) with Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0
accuracy , showing V, A, KW with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 5 VA Class 1.0 metering. , Spreader links
and phase barrier, solid neutral link complete with wiring , connections etc.
0 0
LED indication lamps for RYB, breaker 'ON/ OFF/ TRIP', spring charged, DC control supply healthy etc. with 2Amp control MCBs 0 0
Bus Bar : 0 0
4 Sections of Electrolytic high conductivity Aluminium extensible three phase and 200 % neutral busbars rated at 500 amps , & auxiliary Bus Bars of
suitable capacity insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints having a maximum current density as per Indian
standards suitable to with stand symmetrical fault level of 35 kA at 433 volts i/c DMC/SMC bus bars supports at required intervals complete for cross
section, size supports & their spacing etc. The neutral busbar is to be of full capacity.
0 0
Bus couplers 0 0
800 Amp 4 pole MCCB - 1 set. 0 0
a)MCCB of fault breaking capacity 35KA (Ics=lcu =Icw) upto 433V) conforming to IS/IEC-60947 as amended up-to-date complete for each MCCB.
0 0
Interlocking: 0 0
Electrical Interlocking through advance contacts / contactors in MCCB's (Incomers & Bus couplers) through static transfer switches and parallel kit to be
supplied with UPS should be provided to ensure healthy supply available at a time.
0 0
Outgoings: 0 0
A All MCCB (Ics=lcu) with microprocessor release with O/L, S/C & earth fault protection & followings shall be applicable to each. 0 0
All outgoing with microprocessor based release MCCB for O/C, S/C & earth fault protection of following capacity and rating, 35 KA (Ics=Icu upto 433 V )
with Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0 accuracy , showing V, A, KW
with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 5 VA Class 1.0 metering. , Spreader links and phase barrier, solid
neutral link complete with wiring , connections etc.
0 0
i) 3 Nos. - 800 Amp. TPN 35kA MCCB ( UPS Main Distribution & spares ) 0 0
ii) 2 Nos. - 100 Amp. TPN 35kA MCCB ( UPS Sub distribution utility & spares ) 0 0
Necessary interlocking between Nos. Incomers shall be successfully operational in all possible combinations. 0 0
The Switchboard with Logic control panel shall be complete with all interconnections, risers, internal wiring, labels, control/circuit fuses etc. complete as
required.
0 0
UPS OUTPUT PANEL (T-3 BASEMENT) AS ABOVE 1 Set
832.02 UPS DISTRIBUTION PANEL item1076 0 0
Incomers: 0 0
i)800 Amp. 4 Pole MCCB - 2 set 0 0
All outgoing with microprocessor based release MCCB for O/C, S/C & earth fault protection, front operating handle of following capacity and rating, 35
KA (Ics=Icu upto 433 V ) with Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0
accuracy , showing V, A, KW with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 5 VA Class 1.0 metering. , Spreader links
and phase barrier, solid neutral link complete with wiring , connections etc.
0 0
LED indication lamps for RYB, breaker 'ON/ OFF/ TRIP', spring charged, DC control supply healthy etc. with 2Amp control MCBs 0 0
Bus Bar : 0 0
2 Sections of Electrolytic high conductivity Aluminium extensible three phase and neutral busbars rated at 1000 amps , & auxiliary Bus Bars of suitable
capacity insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints having a maximum current density as per Indian standards
suitable to with stand symmetrical fault level of 35 kA at 433 volts i/c DMC/SMC bus bars supports at required intervals complete for cross section, size
supports & their spacing etc. The neutral busbar is to be of full capacity.
0 0
Bus couplers 0 0
800 Amp 4 pole MCCB - 1 set. 0 0
a)MCCB of fault breaking capacity 35KA (Ics=lcu =Icw) upto 433V) conforming to IS/IEC-60947 as amended up-to-date complete for each MCCB.
0 0
Interlocking: 0 0
Electrical Interlocking through advance contacts / contactors in MCCB's (Incomers & Bus couplers) through static transfer switches and parallel kit to be
supplied with UPS should be provided to ensure healthy supply available at a time.
0 0
Outgoings: 0 0
A All MCCB (Ics=lcu) with microprocessor release with O/L, S/C & earth fault protection & followings shall be applicable to each. 0 0
All outgoing with microprocessor based release MCCB for O/C, S/C & earth fault protection of following capacity and rating, 35 KA (Ics=Icu upto 433 V )
with Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class - 1.0 accuracy , showing V, A, KW
with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 5 VA Class 1.0 metering. , Spreader links and phase barrier, solid
neutral link complete with wiring , connections etc.
0 0
i) 6 Nos. - 160 Amp. TPN 35kA MCCB ( UPS Floor Panels & spares ) 0 0
ii) 7 Nos. - 100 Amp. TPN 35kA MCCB ( UPS Floor Panels & spares ) 0 0
UPS OUTPUT PANEL (T-3 BASEMENT) AS ABOVE 1 Set
833.00 SERVICE YARD L&P PANEL item1077 0 0
Incomers: 0 0
i) 1 No. 250Amps. 4P MCCB '35ka, Icu=Ics with micro processor based release having O/L ,S/C earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 250/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 300 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
i) 5 Nos. - 63 Amp. 16kA TPN, thermal release MCCB (Ics=lcu) with following accessories for each MCCB. 0 0
ii) 4 Nos. - 40 Amp. 16kA TPN, thermal release MCCB (Ics=lcu) with following accessories for each MCCB. 0 0
iii) 4 Nos. - 40 Amp. double pole, MCB 'C' (10ka) 0 0
Service Yard L&P panel as above 1 Set
834.00 SERVICE YARD VENTILATION PANEL item1078 0 0
Incomers: 0 0
i) 1 No. 250Amps. 4P MCCB '36ka, Icu=Ics with micro processor based release having O/L ,S/C earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 250/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 300 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
i) 10 Nos. - 40/63 Amp. Motor duty MCCB (Ics=lcu) with following accessories for each MCCB. 0 0
ii) 2 Nos. - 40 Amp. four pole, MCB 'C' (10ka) with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
iii) 2 Nos. - 32 Amp. double pole, MCB 'C' (10ka) 0 0
Service Yard Ventilation panel as above 1 Set
835.00 SERVICE YARD EXT. DEV. PANEL item1079 0 0
Incomers: 0 0
i) 1 No. 250Amps. 4P MCCB '36ka, Icu=Ics with micro processor based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 250/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 300 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
i) 1 Nos. - 100 Amp. 16ka TPN, thermal release MCCB (Ics=lcu) with following accessories for each MCCB. 0 0
ii) 6 Nos. - 63 Amp. 16ka four pole, thermal release MCCB (Ics=lcu) with following accessories for each MCCB. 0 0
iii) 4 Nos. - 40 Amp. four pole, MCB 'C' (10ka) 0 0
Service Yard Ext. panel as above 1 Set
836.00 T-3 EXT. DEV. PANEL item1080 0 0
Incomers: 0 0
i) 1 No. 250Amps. 4P MCCB '36ka, Icu=Ics with micro processor based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 250/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 300 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
i) 1 Nos. - 100 Amp. 16ka TPN, thermal release MCCB (Ics=lcu) with following accessories for each MCCB. 0 0
ii) 5 Nos. - 63 Amp. 16ka four pole, thermal release MCCB (Ics=lcu) with following accessories for each MCCB. 0 0
iii) 4 Nos. - 40 Amp. four pole, MCB 'C' (10ka) 0 0
T-3 Ext. panel as above 1 Set
837.00 BASEMENT LIGHTING PANEL ( Location- Basement) item1081 0 0
Incomers: 0 0
i) 1 No. 125Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
1 No. 125 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 150/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 150 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
12 Nos. - 40/63 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB with KHW meter 0 0
Lighting panel as above 1 Set
838.00 AR. LEVEL LEVEL LIGHTING PANEL-1 ( Location Electrical Room AR-1) item1082 0 0
Incomers: 0 0
i) 1 No. 100Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
1 No. 100 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 125 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
7 Nos. - 40 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB with KHW meter 0 0
Lighting panel as above 1 Set
839.00 AR. LEVEL LIGHTING PANEL-2 ( Location Electrical Room AR-2) item1083 0 0
Incomers: 0 0
i) 1 No. 125Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
1 No. 125 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 150/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 150 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
12 Nos. - 40 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB with KHW meter 0 0
Lighting panel as above 1 Set
840.00 AR. LEVEL LIGHTING PANEL-3 (Location Electrical Room AR-5) item1084 0 0
Incomers: 0 0
i) 1 No. 125Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
1 No. 125 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 150/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 150 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
10 Nos. - 40 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB with KHW meter 0 0
Lighting panel as above 1 Set
841.00 AR. LEVEL LIGHTING PANEL-4 (Location Electrical Room AR-7) item1085 0 0
Incomers: 0 0
i) 1 No. 100Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
1 No. 100 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 125 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
7 Nos. - 40 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB with KHW meter 0 0
Lighting panel as above 1 Set
842.00 AR.LEVEL LIGHTING PANEL-5 (Location Electrical Room AR-6) item1086 0 0
Incomers: 0 0
i) 1 No. 100Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
1 No. 100 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 150/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 125 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
10 Nos. - 40 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB with KHW meter 0 0
Lighting panel as above 1 Set
843.00 MZ. LEVEL LIGHTING PANEL-1 (Location Electrical Room MZ-2) item1087 0 0
Incomers: 0 0
i) 1 No. 100Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
1 No. 100 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 125 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
8 Nos. - 40 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB with KHW meter 0 0
Lighting panel as above 1 Set
844.00 MZ LEVEL LIGHTING PANEL-2 (Location Electrical Room MZ-3) item1088 0 0
Incomers: 0 0
i) 1 No. 100Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
1 No. 100 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 125 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
5 Nos. - 40 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB with KHW meter 0 0
Lighting panel as above 1 Set
845.00 MZ. LEVEL LIGHTING PANEL-3 (Location Electrical Room MZ-5) item1089 0 0
Incomers: 0 0
i) 1 No. 100Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
1 No. 100 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 125 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
6 Nos. - 40 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB with KHW meter 0 0
Lighting panel as above 1 Set
846.00 DEPARTURE LEVEL LIGHTING PANEL-1 (Location Electrical Room DP-1) item1090 0 0
Incomers: 0 0
i) 1 No. 125Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
1 No. 125 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 150/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 150 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
6 Nos. - 40/63 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB with KHW meter 0 0
Lighting panel as above 1 Set
847.00 DEPARTURE LEVEL LIGHTING PANEL-2 (Location Electrical Room DP-3) item1091 0 0
Incomers: 0 0
i) 1 No. 125Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
1 No. 125 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 150/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 150 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
7 Nos. - 40/63 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB with KHW meter 0 0
Lighting panel as above 1 Set
848.00 DEPARTURE LEVEL LIGHTING PANEL-3 (Location Electrical Room DP-5) item1092 0 0
Incomers: 0 0
i) 1 No. 125Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
1 No. 125 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 150/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 150 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
8 Nos. - 40/63 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB with KHW meter 0 0
Lighting panel as above 1 Set
849.00 DEPARTURE LEVEL LIGHTING PANEL-4 (Location Electrical Room DP-8) item1093 0 0
Incomers: 0 0
i) 1 No. 125Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
1 No. 125 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 150/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 150 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
8 Nos. - 40/63 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB with KHW meter 0 0
Lighting panel as above 1 Set
850.00 Truss Lighting Panel item1094 0 0
INCOMER 0 0
i) 1 No. 100Amps. 4P MCCB '25ka, Icu=Ics with micro processor release with operating handle, spreader links, ON indicating lamp with 2A backup MCB
having O/L ,S/C, earth fault protection equipped with the following:
0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
BUSBARS 0 0
100 Amp TPN busbars of high conductivity electrolytic quality aluminium alloy. 0 0
INSTRUMENTS 0 0
OUTGOING 0 0
Note- All MCCB's shall be with adjustable O/L protection. 0 0
6 Nos. 25 Amp 4P MCB (10 KA) . 0 0
6 Nos. 25 Amp 3P AC contactor with suitable NO/NC contacts 0 0
Truss Panel as above 1 Set
851.00 BASEMENT POWER PANEL-1 (Location Basement) item1095 0 0
Incomers: 0 0
i) 1 No. 160Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 160/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 200 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
7 Nos. - 63 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
Power panel as above 1 Set
852.00 ARRIVAL LEVEL POWER PANEL-1 (Location Electrical Room AR-2 ) item1096 0 0
Incomers: 0 0
i) 1 No. 100 Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 150 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
5 Nos. - 40/63 Amp. TPN, MCCB 16kA with 'ON LED indication lamps backed up with 2Amp back up control MCB 0 0
Power panel as above 1 Set
853.00 ARRIVAL LEVEL POWER PANEL-2 (Location Electrical Room AR-5 ) item1097 0 0
Incomers: 0 0
i) 1 No. 160 Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 160/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 200 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
7 Nos. - 63 Amp. TPN, MCCB 16kA with 'ON LED indication lamps backed up with 2Amp back up control MCB 0 0
Power panel as above 1 Set
854.00 ARRIVAL LEVEL POWER PANEL-3 (Location Electrical Room AR-6 ) item1098 0 0
Incomers: 0 0
i) 1 No. 160 Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 160/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 200 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
6 Nos. - 63 Amp. TPN, MCCB 16kA with 'ON LED indication lamps backed up with 2Amp back up control MCB 0 0
Power panel as above 1 Set
855.00 MEZZ. LEVEL POWER PANEL-1 (Location Electrical Room MZ-2 ) item1099 0 0
Incomers: 0 0
i) 1 No. 160 Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 160/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 200 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
8 Nos. - 63 Amp. TPN, MCCB 16kA with 'ON LED indication lamps backed up with 2Amp back up control MCB 0 0
Power panel as above 1 Set
856.00 MEZZ. LEVEL POWER PANEL-2 (Location Electrical Room MZ-5) item1100 0 0
Incomers: 0 0
i) 1 No. 160 Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 160/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 200 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
5 Nos. - 63 Amp. TPN, MCCB 16kA with 'ON LED indication lamps backed up with 2Amp back up control MCB 0 0
2 Nos. - 100 Amp. TPN, MCCB 16kA with 'ON LED indication lamps backed up with 2Amp back up control MCB 0 0
Power panel as above 1 Set
857.00 DEPARTURE LEVEL POWER PANEL-1 (Location Electrical Room DP-1) item1101 0 0
Incomers: 0 0
i) 1 No. 160 Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 160/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 200 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
6 Nos. - 63 Amp. TPN, MCCB 16kA with 'ON LED indication lamps backed up with 2Amp back up control MCB 0 0
Power panel as above 1 Set
858.00 DEPARTURE LEVEL POWER PANEL-2 (Location Electrical Room DP-4) item1102 0 0
Incomers: 0 0
i) 1 No. 160 Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 160/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 200 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
7 Nos. - 63 Amp. TPN, MCCB 16kA with 'ON LED indication lamps backed up with 2Amp back up control MCB 0 0
Power panel as above 1 Set
859.00 DEPARTURE LEVEL POWER PANEL-3,4 (Location Electrical Room DP-8,7) item1103 0 0
Incomers: 0 0
i) 1 No. 100 Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 160 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
4 Nos. - 63 Amp. TPN, MCCB 16kA with 'ON LED indication lamps backed up with 2Amp back up control MCB 0 0
Power panel as above 2 Set
860.00 BASEMENT UPS PANEL item1104 0 0
Incomers: 0 0
i) 1 No. 100 Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 150 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
10 Nos. - 40 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB with KHW meter 0 0
UPS panel as above 1 Set
861.00 AR. LEVEL UPS PANEL-1,3 (Location Electrical Room AR-2,AR-7) item1105 0 0
Incomers: 0 0
i) 1 No. 160 Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 160/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 200 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
8 Nos. - 40 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
UPS panel as above 1 Set
862.00 AR. UPS PANEL-2 (Location Electrical Room AP-5) item1106 0 0
Incomers: 0 0
i) 1 No. 100 Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 125 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
6 Nos. - 40/63 Amp. TPN, MCCB 16kA with 'ON ' LED indication lamps backed up with 2Amp back up control MCB 0 0
UPS panel as above 1 Set
863.00 MZ. LEVEL UPS PANEL-3 (Location Electrical Room AR-5) item1107 0 0
Incomers: 0 0
i) 1 No. 160 Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 160/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 200 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
7 Nos. - 40 Amp. TPN, MCCB 16kA with 'ON ' LED indication lamps backed up with 2Amp back up control MCB 0 0
UPS panel as above 1 Set
864.00 MZ. LEVEL UPS PANEL-1,2 (Location Electrical Room MZ-1,MZ-4) item1108 0 0
Incomers: 0 0
i) 1 No. 100 Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 125 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
6 Nos. - 40 Amp. TPN, MCCB 16kA with 'ON ' LED indication lamps backed up with 2Amp back up control MCB 0 0
UPS panel as above 2 Set
865.00 DEP. UPS PANEL-2 (Location Electrical Room DP-3) item1109 0 0
Incomers: 0 0
i) 1 No. 100 Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 150 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
8 Nos. - 40/63 Amp. TPN, MCCB 16kA with 'ON ' LED indication lamps backed up with 2Amp back up control MCB 0 0
UPS panel as above 1 Set
866.00 DEP. UPS PANEL-1,3 (Location Electrical Room DP-1,DP-5) item1110 0 0
Incomers: 0 0
i) 1 No. 160 Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 160/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 200 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
6 Nos. - 40/63 Amp. TPN, MCCB 16kA with 'ON ' LED indication lamps backed up with 2Amp back up control MCB 0 0
UPS panel as above 2 Set
867.00 DEP. UPS PANEL-4 (Location Electrical Room DP-7) item1111 0 0
Incomers: 0 0
i) 1 No. 160 Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 160/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 200 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
15 Nos. - 40/63 Amp. TPN, MCCB 16kA with 'ON ' LED indication lamps backed up with 2Amp back up control MCB 0 0
UPS panel as above 1 Set
868.00 AHU Panel-1 Basement item1112 0 0
Incomers: 0 0
i) 1 No. 250 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 250/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
1 No. 250 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 300 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
3 Nos. - 100 Amp. TPN, MCCB 16kA with 'ON ' LED indication lamps backed up with 2Amp back up control MCB 0 0
5 Nos. - 40/63 Amp. TPN, MCCB 16kA with 'ON ' LED indication lamps backed up with 2Amp back up control MCB 0 0
AHU panel as above 1 Set
869.00 AHU Panel-2 Basement item1113 0 0
Incomers: 0 0
i) 1 No. 100 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
1 No. 100 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 150 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
7 Nos. - 32 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
AHU panel as above 1 Set
870.00 AHU Panel-1 AR. item1114 0 0
Incomers: 0 0
i) 1 No. 250 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 250/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
1 No. 250 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 300 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
4 Nos. - 32 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
3 Nos. - 63 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
AHU panel as above 1 Set
871.00 AHU Panel-2 AR. item1115 0 0
Incomers: 0 0
i) 1 No. 160 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 160/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
1 No. 160 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 200 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
1 Nos. - 32 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
6 Nos. - 40/63 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
AHU panel as above 1 Set
872.00 AHU Panel-3 AR. item1116 0 0
Incomers: 0 0
i) 1 No. 63 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following: 0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 100 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
2 Nos. - 32 and 2 Nos. 40 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
AHU panel as above 1 Set
873.00 AHU Panel-1 MZ. item1117 0 0
Incomers: 0 0
i) 1 No. 250 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 250/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
1 No. 250 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 300 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
7 Nos. - 32 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
5 Nos. - 63 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
AHU panel as above 1 Set
874.00 AHU Panel-2 MZ. item1118 0 0
Incomers: 0 0
i) 1 No. 100 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
1 No. 100 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 150 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
3 Nos. - 32/40 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
2 Nos. - 63 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
AHU panel as above 1 Set
875.00 AHU Panel-3 MZ. item1119 0 0
Incomers: 0 0
i) 1 No. 160 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 160/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
1 No. 160 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 200 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
2 Nos. - 32 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
5 Nos. - 63 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
AHU panel as above 1 Set
876.00 AHU Panel-4 MZ. item1120 0 0
Incomers: 0 0
i) 1 No. 100 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
1 No. 100 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 150 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
4 Nos. - 32 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
4 Nos. - 63 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
AHU panel as above 1 Set
877.00 AHU Panel-1 Departure item1121 0 0
Incomers: 0 0
i) 1 No. 250 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 250/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
1 No. 250 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 300 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
5 Nos. - 32/40 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
2 Nos. - 63 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
1 Nos. - 100 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
AHU panel as above 1 Set
878.00 AHU Panel-2 Departure item1122 0 0
Incomers: 0 0
i) 1 No. 160 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 160/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
1 No. 160 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 200 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
5 Nos. - 32/40 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
3 Nos. - 63 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
AHU panel as above 1 Set
879.00 AHU Panel-3 Departure item1123 0 0
Incomers: 0 0
i) 1 No. 100 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/5 Amp ratio,
15 VA Class 1.0 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 150 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
2 Nos. - 32/40 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
3 Nos. - 63 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
AHU panel as above 1 Set
880.00 AHU Panel-4 Departure item1124 0 0
Incomers: 0 0
i) 1 No. 100 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
1 No. 100 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 150 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
5 Nos. - 32/40 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
2 Nos. - 63 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
AHU panel as above 1 Set
881.00 AHU Panel-5 Departure item1125 0 0
Incomers: 0 0
i) 1 No. 250 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 250/ 5 Amp ratio,
15 VA Class 1.0 metering.
0 0
1 No. 250 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 300 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
2 Nos. - 40 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
5 Nos. - 63 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
AHU panel as above 1 Set
882.00 Basement Ventilation Panel-1 item1126 0 0
Incomers: 0 0
i) 1 No. 400 Amps. 4P MCCB '25ka, Icu=Ics with microprocessor based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 400/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 500 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
14 Nos. - 63 Amp. TPN, motor duty MCCB with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
Vent. panel as above 1 Set
883.00 Basement Ventilation Panel-2 item1127 0 0
Incomers: 0 0
i) 1 No. 315 Amps. 4P MCCB '25ka, Icu=Ics with microprocessor based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 400/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 400 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
10 Nos. - 63 Amp. TPN, motor duty MCCB with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
4 Nos. - 32 Amp. TPN, motor duty MCCB with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
Vent. panel as above 1 Set
884.00 Basement Ventilation Panel-3 item1128 0 0
Incomers: 0 0
i) 1 No. 315 Amps. 4P MCCB '25ka, Icu=Ics with microprocessor based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 400/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 400 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
14 Nos. - 63 Amp. TPN, motor duty MCCB with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
Vent. panel as above 1 Set
885.00 Basement Ventilation Panel-4 item1129 0 0
Incomers: 0 0
i) 1 No. 315 Amps. 4P MCCB '25ka, Icu=Ics with microprocessor based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 400/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 400 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
8 Nos. - 63 Amp. TPN, motor duty MCCB with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
4 Nos. - 32 Amp. TPN, motor duty MCCB with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
Vent. panel as above 1 Set
886.00 Smoke Ext. Panel-1 Ar. item1130 0 0
Incomers: 0 0
i) 1 No. 100 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 125 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
1 Nos. - 63 Amp. TPN, MCCB with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
5 Nos. - 40/32 Amp. TPN, motor duty MCCB with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
Smoke ext. panel as above 1 Set
887.00 Smoke Ext. Panel-2 Ar. item1131 0 0
Incomers: 0 0
i) 1 No. 63 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following: 0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 100 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
5 Nos. - 40 Amp. TPN, motor duty MCCB with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
Smoke ext. panel as above 1 Set
888.00 Smoke Ext. Panel-1 MZ. item1132 0 0
Incomers: 0 0
i) 1 No. 100 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 125 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
14 Nos. - 40 Amp. TPN, motor duty MCCB with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
Smoke ext. panel as above 1 Set
889.00 Smoke Ext. Panel-2,3 MZ. item1133 0 0
Incomers: 0 0
i) 1 No. 160 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 160/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 150 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
10 Nos. - 32/40 Amp. TPN, motor duty MCCB with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
Smoke ext. panel as above 2 Set
890.00 Smoke Ext. Panel- Immigration item1134 0 0
Incomers: 0 0
i) 1 No. 160 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 160/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 200 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
7 Nos. - 40 Amp. TPN, motor duty MCCB with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
2 Nos. - 63 Amp. TPN, motor duty MCCB with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
Smoke ext. panel as above 1 Set
891.00 Smoke Ext. Panel- DOM BRH-1 MZ. item1135 0 0
Incomers: 0 0
i) 1 No. 250 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 250/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 300 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
17 Nos. - 63 Amp. TPN, motor duty MCCB with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
Smoke ext. panel as above 1 Set
892.00 Smoke Ext. Panel- DOM BRH-2 Arrival item1136 0 0
Incomers: 0 0
i) 1 No. 200 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 200/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 250 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
9 Nos. - 63 Amp. TPN, motor duty MCCB with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
Smoke ext. panel as above 1 Set
893.00 Smoke Ext. Panel- INT. MZ. item1137 0 0
Incomers: 0 0
i) 1 No. 400 Amps. 4P MCCB '25ka, Icu=Ics with microprocessor based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 400/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 400 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
17 Nos. - 63 Amp. TPN, motor duty MCCB with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
Smoke ext. panel as above 1 Set
894.00 Smoke Ext. Panel- Departure-1,2,3,4 item1138 0 0
Incomers: 0 0
i) 1 No. 630 Amps. 4P MCCB '25ka, Icu=Ics with microprocessor based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 630/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 700 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
23 Nos. - 63 Amp. TPN, motor duty MCCB with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
Smoke ext. panel as above 4 Set
895.00 Smoke Ext. Panel- Departure-5 item1139 0 0
Incomers: 0 0
i) 1 No. 400 Amps. 4P MCCB '25ka, Icu=Ics with microprocessor based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 400/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 500 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
15 Nos. - 63 Amp. TPN, motor duty MCCB with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
Smoke ext. panel as above 1 Set
896.00 Pressurization panel-1,3 item1140 0 0
Incomers: 0 0
i) 1 No. 160 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 160/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 200 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
10 Nos. - 32/40 Amp. TPN, motor duty MCCB with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
4 Nos. - 63 Amp. TPN, motor duty MCCB with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
Smoke ext. panel as above 2 Set
897.00 Pressurization panel-2 item1141 0 0
Incomers: 0 0
i) 1 No. 160 Amps. 4P MCCB '25ka, Icu=Ics with thermal based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 160/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 200 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating,16 KA (Ics=Icu upto 433 V ) with front operating handle, Spreader links and phase barrier, solid neutral link complete with wiring ,
connections etc.
0 0
12 Nos. - 32/40 Amp. TPN, motor duty MCCB with 'ON/OFF' LED indication lamps backed up with 2Amp back up control MCB 0 0
Smoke ext. panel as above 1 Set
898.00 Meter Board Retail -Apron-1 item1142 0 0
Incomers: 0 0
i) 1 No. 250Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 250/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 300 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoings shall have space provision for suitable rating dual source KWH meter, associated earthing, CT's, for required no. outgoing, each in sealable
compartment . All outgoing shall be provided with required control cable, inter-connection etc. with suitable size of wires complete as required. as
required.
0 0
23 Nos. 63A TPN MCB (10 KA) with three phase dual source prepaid metre in Sealable compartment with each MCB in lockable compartment .
0 0
23 Nos. one line display in the field at end point for display of balance units/recharge amount. 0 0
Meter Board panel as above 1 Set
899.00 Meter Board Retail -Apron-2 item1143 0 0
Incomers: 0 0
i) 1 No. 200Amps. 4P MCCB '25ka, Icu=Ics with micro processor release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 200/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 250 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoings shall have space provision for suitable rating dual source KWH meter, associated earthing, CT's, for required no. outgoing, each in sealable
compartment .All outgoing shall be provided with required control cable, inter-connection etc. with suitable size of wires complete as required. as
required.
0 0
10 Nos. 63A TPN MCB (10 KA) with three phase dual source prepaid metre in Sealable compartment with each MCB in lockable compartment .
0 0
10 Nos. one line display in the field at end point for display of balance units/recharge amount. 0 0
Meter Board panel as above 1 Set
900.00 Meter Board Retail - Departure-1 item1144 0 0
Incomers: 0 0
i) 1 No. 400Amps. 4P MCCB '25ka, Icu=Ics with microprocessor based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 400/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 500 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoings shall have space provision for suitable rating dual source KWH meter, associated earthing, CT's, for required no. outgoing, each in sealable
compartment .All outgoing shall be provided with required control -connection etc. with suitable size of wires complete as required. as required.
0 0
12 Nos. 63A TPN MCB (10 KA) with three phase dual source prepaid metre in Sealable compartment with each MCB in lockable compartment .
0 0
4 Nos. 100A TPN MCCB (16 KA) with three phase dual source prepaid metre in Sealable compartment with each MCCB in lockable compartment .
0 0
16 Nos. one line display in the field at end point for display of balance units/recharge amount. 0 0
Meter Board panel as above 1 Set
901.00 Meter Board Retail - Departure-2 item1145 0 0
Incomers: 0 0
i) 1 No. 400Amps. 4P MCCB '25ka, Icu=Ics with microprocessor based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 400/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 500 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoings shall have space provision for suitable rating dual source KWH meter, associated earthing, CT's, for required no. outgoing, each in sealable
compartment .All outgoing shall be provided with required control -connection etc. with suitable size of wires complete as required. as required.
0 0
13 Nos. 63A TPN MCB (10 KA) with three phase dual source prepaid metre in Sealable compartment with each MCB in lockable compartment .
0 0
6 Nos. 100A TPN MCCB (16 KA) with three phase dual source prepaid metre in Sealable compartment with each MCCB in lockable compartment .
0 0
19 Nos. one line display in the field at end point for display of balance units/recharge amount. 0 0
Meter Board panel as above 1 Set
902.00 Meter Board Retail - Departure-3 item1146 0 0
Incomers: 0 0
i) 1 No. 400Amps. 4P MCCB '25ka, Icu=Ics with microprocessor based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 400/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 500 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoings shall have space provision for suitable rating dual source KWH meter, associated earthing, CT's, for required no. outgoing, each in sealable
compartment .All outgoing shall be provided with required control -connection etc. with suitable size of wires complete as required. as required.
0 0
17 Nos. 63A TPN MCB (10 KA) with three phase dual source prepaid metre in Sealable compartment with each MCB in lockable compartment .
0 0
6 Nos. 100A TPN MCCB (16 KA) with three phase dual source prepaid metre in Sealable compartment with each MCCB in lockable compartment .
0 0
23 Nos. one line display in the field at end point for display of balance units/recharge amount. 0 0
Meter Board panel as above 1 Set
903.00 PBB Panel-1 item1147 0 0
Incomers: 0 0
i) 1 No. 400Amps. 4P MCCB '25ka, Icu=Ics with microprocessor based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
1 No. 400 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 400/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 500 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating, -- KA (Ics=Icu upto 433 V ) with Set of Digital flush type calibrated KWH meters suitable rating class - 1.0 accuracy , showing KW with
3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 5 VA Class 1.0 metering. , Spreader links and phase barrier, solid neutral
link complete with wiring , connections etc.
0 0
6 Nos. - 125 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB with KHW meter 0 0
PBB panel-1 as above 1 Set
904.00 PBB Panel-2,3 item1148 0 0
Incomers: 0 0
i) 1 No. 400Amps. 4P MCCB '25ka, Icu=Ics with microprocessor based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
1 No. 400 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 400/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 500 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating, -- KA (Ics=Icu upto 433 V ) with Set of Digital flush type calibrated KWH meters suitable rating class - 1.0 accuracy , showing KW with
3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 5 VA Class 1.0 metering. , Spreader links and phase barrier, solid neutral
link complete with wiring , connections etc.
0 0
7 Nos. - 125 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB with KHW meter 0 0
PBB panel-2,3 as above 2 Set
905.00 Lift & Esc. Panel-1 to 2 item1149 0 0
Incomers: 0 0
i) 1 No. 400Amps. 4P MCCB '25ka, Icu=Ics with microprocessor based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
1 No. 400 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 400/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 500 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating, -- KA (Ics=Icu upto 433 V ) with Set of Digital flush type calibrated KWH meters suitable rating class - 1.0 accuracy , showing KW with
3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 5 VA Class 1.0 metering. , Spreader links and phase barrier, solid neutral
link complete with wiring , connections etc.
0 0
13 Nos. - 63 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
Lift & Esc. Panel as above 2 Set
906.00 Lift & Esc. Panel-3 to 5 item1150 0 0.00
Incomers: 0 0.00
i) 1 No. 250Amps. 4P MCCB '25ka, Icu=Ics with microprocessor based release having O/L ,S/C, earth fault protection equipped with the following:
0 0.00
1 No. 250 Amp 415 volts, Four Pole, 25KA, ATS series with inbuilt controller having AMF panel features etc. complete as Incomer. 0 0.00
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0.00
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 250/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0.00
Bus Bar : 0 0.00
TPN aluminium extensible type main bus bars of minimum of 300 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0.00
Outgoings: 0 0.00
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating, -- KA (Ics=Icu upto 433 V ) with Set of Digital flush type calibrated KWH meters suitable rating class - 1.0 accuracy , showing KW with
3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 5 VA Class 1.0 metering. , Spreader links and phase barrier, solid neutral
link complete with wiring , connections etc.
0 0.00
8 Nos. - 63 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0.00
Lift & Esc. Panel as above 3 Set
907.00 ELV UPS Input Panel-1,2 item1151 0 0
Incomers: 0 0
i) 2 No. 400Amps. 4P MCCB '25ka, Icu=Ics with microprocessor based release having O/L ,S/C, earth fault protection equipped with the following:
0 0
a) 3 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 200/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
Electrical Interlocking through advance contacts / contactors in MCCB's (Incomers & Bus couplers) through static transfer switches and parallel kit to be
supplied with UPS should be provided to ensure healthy supply available at a time.
0 0
Bus Bar : 0 0
TPN aluminium extensible type main bus bars of minimum of 500 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoings: 0 0
All outgoing with thermal magnetic based adjustable release MCCB with front operating handle for O/C, S/C & earth fault protection of following
capacity and rating, -- KA (Ics=Icu upto 433 V ) with Set of Digital flush type calibrated KWH meters suitable rating class - 1.0 accuracy , showing KW with
3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 5 VA Class 1.0 metering. , Spreader links and phase barrier, solid neutral
link complete with wiring , connections etc.
0 0
4 Nos. - 100 Amp. TPN, MCCB 16kA with 'ON' LED indication lamps backed up with 2Amp back up control MCB 0 0
ELV UPS Input Panel as above 2 Set
908.00 Utility Tunnel Light & Power Panel item1152 0 0
INCOMER 0 0
i) 1 No. 100Amps. 4P MCCB '25ka, Icu=Ics with thermal based release with operating handle, spreader links, ON indicating lamp with 2A backup MCB
having O/L ,S/C, earth fault protection equipped with the following:
0 0
b) Set of Digital flush type class 1.0 accuracy multifunction meter , showing V, A, KW etc. and 3 Nos. cast resin current transformers of 100/ 5 Amp ratio,
15 VA Class 0.5 metering.
0 0
BUSBARS 0 0
150 Amp TPN busbars of high conductivity electrolytic quality aluminium alloy. 0 0
INSTRUMENTS 0 0
OUTGOING 0 0
5 Nos. 63 Amp 4P MCB ( 10 kA) 0 0
5 Nos. 40 Amp TPN MCB (10 kA). 0 0
Tunnel Panel as above 2 Set
909.00 External Lighting Feeder pillars item1153
Supply, assembly, erection, connecting, testing & commissioning of LT weather proof dust and vermin proof, outdoor feeder pillar/ panel board (as per
site requirement) double door type, fabricated out of board/panel shall be made out of modular Polycarbonate thermoplastic enclosure for environment
friendly, recyclable, UV resistant, halogen & silicon free, anti acid & anti corrosive. The gasket material shall be Polyurethane; while the gasket shall be
internally embedded. Panel shall be openable with locking arrangement/ front operated if panel board type. Panel shall be IP-65 or higher rated and
enclosure shall be type tested as per IEC -61439 etc. The feeder pillars shall be complete with 3 phase and neutral bus bars of capacities as described
below and moulded case circuit breakers (MCCBs) with adjustable overload relay, copper FRLS control wiring with 1.5 sq.mm, duly painted complete with
earth bus, aluminium bus bar, numbering & sign writing, interconnection etc. & CPRI test reports for short circuit, dielectric strength mechanical
protection IK-08 and temperature rise.
0 0
909.01 External Lighting Feeder pillars-1,2 item1154 0 0
Incomer 0 0
i) 1 No. 100Amps. 4P MCCB '25ka, Icu=Ics with thermal based release with operating handle, spreader links, ON indicating lamp with 2A backup MCB
having O/L ,S/C, earth fault protection equipped with the following:
0 0
BUSBARS 0 0
150 Amp 4P busbars of high conductivity electrolytic quality aluminium alloy. 0 0
OUTGOING 0 0
Note- All MCCB's shall be with adjustable O/L protection. 0 0
6 sets of 40 Amps,4P , MCB with 40 Amps, 4P Contractor. 0 0
0-24 hour Astronomical timer auto/manual by pass selector switches, push buttons, LED indications etc. 0 0
1 No. 63 Amp, 4P MCB 0 0
3 Nos. 63 Amp DP RCCB's of 300 mA leakage current. 0 0
3 Nos. 63 Amps DP contractor. 0 0
11 Nos. 20 Amps SP MCB. 0 0
6 Nos. 6 Amps SP MCB 0 0
External Lighting Feeder pillars-1,2 described as above. 2 Set
909.02 External Lighting Feeder pillars-3,4 item1155 0 0
Incomer 0 0
i) 1 No. 100Amps. 4P MCCB '25ka, Icu=Ics with thermal based release with operating handle, spreader links, ON indicating lamp with 2A backup MCB
having O/L ,S/C, earth fault protection equipped with the following:
0 0
BUSBARS 0 0
150 Amp 4P busbars of high conductivity electrolytic quality aluminium alloy. 0 0
OUTGOING 0 0
Note- All MCCB's shall be with adjustable O/L protection. 0 0
6 sets of 40 Amps,4P , MCB with 40 Amps, 4P Contractor. 0 0
0-24 hour timer auto/manual by pass selector switches 0 0
2 No. 63 Amp, 4P MCB 0 0
6 Nos. 63 Amp DP RCCB's of 300 mA leakage current. 0 0
6 Nos. 63 Amps DP contractor. 0 0
10 Nos. 20 Amps SP MCB. 0 0
4 Nos. 6 Amps SP MCB 0 0
External Lighting Feeder pillars-3,4 described as above. 2 Set
910.00 HSD Panel item1156 0 0
Supply, installation, testing and commissioning of dust, damp and water proof cubicle free floor, outdoor type (IP 65) double door, factory built sheet
steel HSD Pump Control Panel, suitable for auto/manual operation of two nos of Fuel Pumps working on 415 ±10% volts, 50 Hz AC, 3 phase 4 wire supply
system fabricated out of CRCA sheet steel of 2mm thick for frame work and 1.6mm thick for doors/ covers, 3mm thick for gland plates i/c cleaning &
finishing complete with 9 tank process for powder coating in approved shade, having TPN Aluminium bus bars of high conductivity, DMC/SMC bus bar
supports, entire panel shall have a common tinned copper earth bar of suitable size, neutral links, including copper FRLS control wiring, cable alleys, cable
gland plates in two half, danger notice plates, etc. necessary metering, protections & indications, audio and visual alarm for low / high HSD oil level
indication, relays, protections, and mounted with the following switch gears, including all civil works like excavation, PCC, brick work pedestal, plastering,
refilling etc. complete as required. (MCC For HSD System)
0 0
Incoming: 0 0
1 No. 63Amps. 4P MCCB '35ka, with thermal magnetic release having O/L & S/C protection equipped with the following 0 0
1 No. 0 to 500 V 96 Sqmm Digital voltmeter with inbuilt selector switch 0 0
1 Set of 96 Sqmm Digital flush type (0-100A), class 1.0 accuracy ammeter and 3 Nos. cast resin current transformers of 60/ 5 Amp ratio, 10 VA Class 1.0
metering.
0 0
R,Y,B . Phase indication LED lamps with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB 0 0
Bus Bars: 0 0
TPN aluminium extensible type main bus bars of minimum of 100 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars
supports at required intervals complete.
0 0
Outgoing 0 0
i. 2 Nos. 32 A TP MPCB with overload and short-circuit protection having rotary operating mechanism, 3 HP DOL Starter for HSD pumps motor (including
1 No. standby). Each compartment shall contain 0-30 amps direct operated ammeter, Auto / Manual selector switch, ON/Off / Trip indicating lamps with
control MCB’s complete as required (if one pump fail to starts then other pumps starts automatically).
0 0
ii. 1 No. 32 A TP MPCB with overload and short-circuit protection having rotary operating mechanism, as spare. 0 0
Note: 0 0
i. Potential free contacts to be provided to remote starting facilities of pumps through BMS 1 Set
911.00 ELECTRICAL SYSTEM - Fire Fighting item1157 0.00 0
Design, manufacture, supply, installation, testing and commissioning of the fire pump control panel, front operated cubicle construction, Floor mounted
type, fabricated out of 2mm thick CRCA Sheet, Compartmentalized with hinged lockable doors, dust and vermin proof, Powder coated of approved shade
after 7 tank treatment, Cable alley, inter-connections, having Switch gear and accessories mounting, internal wiring, earth terminals, Top/ Bottom cable
entry, numberings etc. suitable for operation of 415 volts, 3 phase 4 wire 50 Hz AC Supply with enclosure protection class IP 42 complete as required
and as specified with the following:
0.00 0
NOTE:- This panel will be of same design and specificartions as other panels in Sub-station work. 0.00 0
Fire Pump Control Panel 0.00 0
i) Incomer 0 0
a) Two (2) Nos. 400 A, 50 KA, Four pole MCCB with micro processor based relay for short circuit and over current .Each incomer shall be provided with the
following.
0 0
- One (1) No. Multi Function Meter with one set (3 Nos.) of CTs of ratio 630/5A Class 1.0, 15VA. 0 0
- One set ( 3 nos.) Phase indication lamps with control MCB. 0 0
- One set ( 3 nos.) ON/OFF/TRIP indication lamp 0 0
ii) Busbar : 0 0
600A , 50kA TP + N Al. Busbar insulated with heat shrinkable sleeves and shall be colour coded. The neutral busbar shall be 50% rated. 0 0
Separate earth busbar of 32 x 6 mm of GI. shall be provided on the rear bottom of the panel. 0 0
iii) Bus Coupler : 0 0
a) One (1) No. 400A , 50 KA ,Four pole , MCCB with ON/OFF indication lamp and TNC control switch, 0 0
iv) Outgoings : 0 0
a) For Main fire and sprinklers pumps -2 Nos. 0.00 0
250 Amps. TP+N MCCB ( Motor Duty) 35 KA with rotary handle on door. 0.00 0
Ammeter (0-250 Amps) with selector Switch & CT's etc. 0.00 0
Set of ON / OFF indication Lamps protected by MCB. 0.00 0
Suitable HP fully soft starter suitable for pump motor 75 KW with over load protection & current sensing type complete with all accessories and internal
wiring for automatic operation.
0.00 0
Set of Selector switches for Auto / Manual /OFF operation. 0.00 0
Set of ON & OFF Push Buttons 0.00 0
b) For Jockey pumps -2 Nos. 0.00 0
63 Amps. TP+N MCCB, 25 KA (motor duty) with rotary handle on door. 0.00 0
Ammeter (0-63 Amps) with selector Switch & CT's etc. 0.00 0
Set of LED ON / OFF indication Lamps protected by MCB. 0.00 0
Suitable HP fully soft starter suitable for pump motor 12.5 KW with over load protection & current sensing type complete with all accessories and
internal wiring for automatic operation.
0.00 0
Set of Selector switches for Auto / Manual / OFF operation. 0.00 0
Set of ON & OFF Push Buttons. 0.00 0
c) Diesel Engine Control - For 104 BHP -2 No. 0.00 0
Auto / Manual selector switch & 3 attempt starting device, timers and relays, push buttons, start / stop in manual mode etc. 0.00 0
LED Indication lamp for High / Low Lube oil pressure , High Water Temp and Engine ON indication. 0.00 0
Battery charger suitable for 12/24V DC ,180AH with boost and tickle circuits,selector switches, 0-30 V DC Voltmeter , 0-20 Amp DC Ammeter etc.
0.00 0
All standard relays and accessories for automatic operation of diesel engine. 0.00 0
d) For Water Curtain pump -1 No. 0.00 0
160 Amps. TP with nuetral link MCCB ( Motor Duty) 35 KA with rotary handle on door. 0.00 0
Ammeter (0-200 Amps) with selector Switch & CT's etc. 0.00 0
Set of ON / OFF indication Lamps protected by MCB. 0.00 0
Suitable HP fully automatic Star delta starter suitable for pump motor 37.5 KW with over load protection & current sensing type single phase preventor
complete with all accessories and internal wiring for automatic operation.
0.00 0
Set of Selector switches for Auto / Manual /OFF operation. 0.00 0
Fire Pump Control Panel as above 1 Set
0 0 0
912.00 PUMPS AND EQUIPMENTS item1158 0 0
For WTP Pump Room
Design, manufacture, supply, installation, testing and commissioning of the Plumbing panel, front operated, cubicle construction, Floor mounted type 2 0 0
mm thick and top /bottom gland plate thickness 3 mm, CRCA Sheet, Compartmentalized with hinged lockable doors, dust and vermin proof, Powder
coated finish with 9 tank process of approved shade, Cable alley, inter-connections, having Switch gear and accessories mounting, internal wiring, earth
terminals, Top/ Bottom cable entry, numberings etc. suitable for operation of 415 volts, 3 phase, 50 Hz, AC Supply with enclosure protection class IP 52
complete as required and as specified with the following:
INCOMER 0 0
Each Incomer shall consit of : 0 0
250 Amps, Three pole, 35 KA MCCB with rotary handle on door. 0 0
Voltmeter (0-500 Volts) with selector Switch & protected by MCB's. 0 0
Ammeter (0-300 Amps) with selector Switch &CT's etc. 0 0
Set of (R,Y,B) LED phase and ON & OFF indication Lamps. 0 0
BUSBAR 0 0
1 Set 415Volt, 300 Amps Three Phase and neutral busbars of aluminium complete with Heat shrinkalbe colour coded sherve. 0 0
OUTGOING 0 0
Domestic Water Supply hydropneumatic pumps set 4 Nos. (3w+1s) pumps 0 0
160Amps. TP with nuetral link MCCB ( Motor Duty) with rotary handle on door suitable for 72 HP and for Connection to Built up Hydro Panel.---1No. 0 0
Water level indicators and controllers :The hydrostatic pressure sensor (Water level indicator) is working on hydrostatic pressure measurement
principle made of Stainless Steel for installation in storage tanks, and capable of providnig 4 to 20 mA analog signal compatible with PLC signal inputs
and all control outputs to MCC panel (Plumbing/Water supply),complete as per working requirements for equipment detailed below.
107 Set
N MISCELLANEOUS - SUB STATION ITEMS 0 0
918.00 Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm item1167
angle iron, 60 cm long and fixing the same in ground as required for HT/LT 33/11KV, 1.1KV cable route marking including PCC base as required all as
specified & approved by Engineer Incharge.
30 Nos.
919.00 Supplying and laying ISI marked following electric insulating mats of 33/11/3.3 KV working voltage grade of approved make as per IS-15652-2007 item1168
amended up-to-date complete as required & approved by Engineer Incharge.
0 0
919.01 2.0mm thick 3.3kv working voltage level grade. item1169 80 Sqm.
919.02 2.5mm thick 11kv working voltage level grade. item1170 40 Sqm.
919.03 3mm thick 33kv working voltage level grade. item1171 20 Sqm.
920.00 Supplying of fire buckets of 10 liters Capacity of approved quality, painted white from inside and red outside and having inscription "FIRE" in white item1172
conforming to I.S. 2546/1974 duly amended upto date complete as required & approved by Engineer Incharge.
18 Nos.
921.00 Supplying and fixing of MS pedestal stand heavy duty with rain protection cover as required suitable for supporting Six fire buckets as required for fire item1173
fighting system & approved by Engineer Incharge.
3 Set
922.00 Supplying and fixing carbon dioxide (CO2) type fire extinguishers conforming to IS 15683 with cylinder duly charged of capacity 4.5kgs. including fixing item1174
clamps, brackets, bolts and nuts etc. as required & approved by the Engineer Incharge.
12 Nos.
923.00 Supplying and fixing 10kg capacity Modular Automatic Fire Extinguishers dry chemical powder nitrogen type pre-set at works ranging from 57 deg C/ 68 item1175
deg C/ 79 deg C fire extinguishers conforming to IS 15683 including fixing clamps, brackets, bolts and nuts etc. complete as required & approved by the
Engineer Incharge.
6 Nos.
924.00 shock treatment/ restoration charts written in Hindi/ local language and English duly framed and covered with 3.0 mm glass as required. item1176 6 Set
925.00 First Aid Box made of 16 SWG MS Sheet duly painted within inside and outside surfaces with one coat of primer and two coats of synthetic paint of item1177
required shade comprising the following minimum but not limited.
0 0
925.01 minimum 1 No. band aid bandage 150mm, 1 No. Savlon Soap 30 ml, 1 No bottle Betadine 30 ml, 1 No Packet dressing material etc. as required. item1178
2 Set
925.02 HT 36 KV rubber gloves as per IS 4770-1991 item1179 2 Set
925.03 HT 12 KV rubber gloves as per IS 4770-1991 item1180 2 Set
926.00 Supplying of Caution Boards manufactured out of 16 SWG, MS sheet of 450mmx 300mm size duly painted white and having `MAN ON LINE' and 'DO NOT item1181
SWITCH ON' written in Red complete with hanging arrangement as required and & approved by the Engineer Incharge.
4 Nos.
927.00 Providing and fixing HT Danger Notice Plate of 250mmx 200mm made of mild steel at least 1.6mm thick and vitreous enamelled, white on both sides and item1182
with inscription in letters, figures and conventional signal red colour on front side as required & approved by the Engineer Incharge.
4 Nos.
928.00 Providing and fixing LT Danger Notice Plate of 200mmx 200mm made of mild steel at least 1.6mm thick and vitreous enamelled, white on both sides and item1183
with inscription in letters, figures and conventional signal red colour on front side as required & approved by the Engineer Incharge.
4 Nos.
929.00 Supplying & fixing of fire sealants to shafts, ceiling, cut-outs etc. with 2 hour fire rated composition as per specifications, NEC2011, relevant IS & as per item1184
approved makes of material & making good the same complete with accessories as required per site
50 Sqm
P UPS SYSTEM 0 0
930.00 Supply, Installation, Testing and Commissioning of following rated high performance IGBT based fully microprocessor controlled (three phase Input & item1185
three phase Output) online UPS system suitable for input and output parameters as per specifications. The UPS shall have Separate Galvanic Isolation
Transformer External K13 Copper Wound (After Static Switch) transformer. The UPS shall be provided in powder coated fan cooled enclosure painted in
colour as per specifications. The UPS shall be modular type suitable for normal, emergency, recharge, by-pass and maintenance mode including bypass
arrangement. The system be expandable in such a manner that addition of another module of similar capacity can double the system output with
common by-pass. The UPS shall have a microprocessor based display and control panel. UPS shall have own batteries with 30 minute battery back-up
with batteries having High Performance, Hot swappable/scalable, user replaceable ,internally fused pluggable type Battery modules. Complete system
must be provided as per specifications approved drawing and as per site requirement including inter connecting cables from battery to UPS, UPS to panel
with single core copper cabling etc. UPS shall work on parallel/ hot redundancy mode, cost of supporting kit shall be included. supports for complete
system as approved by the Engineer in charge complete in all respect.
0 0.00
930.01 200 KVA UPS described as above (N+1 mode) item1186 4 Set
930.02 30 KVA UPS described as above (N+1 mode) item1187 6 Set
931.00 Supply & installation of following rated KVA solar inverter input three phase (415 V ± 10%) output three phase (415 V ± 10%) with sealed maintenance item1188
free batteries suitable for 30 minutes backup including providing suitable size of 14 gauge MS battery rack suitably painted.
5 KVA described as above
1 Set
M Prepaid metering system 0 0
932.00 Supply, Installation & Testing of Prepayment Meters as per “IS 15884: 2010” by “BUREAU OF INDIAN STANDARDS” for AC Direct Connected Static item1189
Prepayment Meters for Active Energy” released on February, 2010. Three Phase Liberty Prepayment Meter 10A-60A with Dual register facility with Home
display/ Freedom Unit. Meter should have inbuilt disconnect switches as per BIS requirement with Overload and Low balance alarm facility
95 Nos.
933.00 Supply, Installation & Testing of Prepayment Meters are compliance of specification “IS 15884: 2010” by “BUREAU OF INDIAN STANDARDS” for AC Direct item1190
Connected Static Prepayment Meters for Active Energy” released on February, 2010. Single Phase Liberty Prepayment Meter 10A-60A with Dual register
facility with Home display/ Freedom Unit. Meter should have inbuilt disconnect switches as per BIS requirement with Overload and Low balance alarm
facility with Supply, Installation, testing & Commissioning of DG sensing Switch Mode Power Supply Unit for discrimination receivers for sensing of DG
15 Nos.
934.00 Supply, Installation, testing & Commissioning PC for Local server with 8 GB RAM, 1 TB Hard Disk, Oracle Client, DVD Drive, 2.0/3.0/4.0 USB Ports of item1191
Standard make alongwith Keyboard, mouse, mouse pad etc complete with UPS of 800 VA with 20 min. back up, Laser Color jet Printer
1 Set
935.00 Supply, Installation, testing , Commissioning of Vending software certified by (ISO/IEC 27001) & Training of the vending System for Tariff designing as per item1192
BIS guidelines & Customer Data Base definition(Vending Services and training, Annual charges for Vending services (Per consumer Meter) shall not be
extra paid).
110 Nos.
936.00 Supply, Installation, testing , Commissioning of Token Printer with Serial Port ( Epson make).Tokens are meter specified and encrypted with triple des item1193
technology. Also the vending system is ISO/IEC 27001 compliance with certification.
1 Nos.
V AUTOMATIC ADDRESSABLE FIRE DETECTION AND ALARM SYSTEM 0 0
FIRE ALARM SYSTEM 0 0
937.00 Supply, Installation, Testing & Commissioning of Microprocessor based 10 loop minimum (5.1" touch screen LCD display), Networkable analogue item1194
addressable type fire alarm control panel with minimum 600 character display, The panel should be equipped with sufficient numbers of loop with 10-
20% spare capacity having seamless integrated voice evacuation with amplifier as per the quantity and fire fighting telephone system rail mounted with
each loop shall have a capacity of 250 analog addressable devices in one loop. Four access levels, capable of taking Flash Scan devices, flash EPROM
sufficient numbers of programmable relay controls for controlling AHUs, pressurization fans, ventilation fans at fire pump room, monitoring of fire
sprinkler and fire hydrant pump, addressable 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24
hours normal working and then be capable of operating the system for 2 hours during an emergency conditions as required. The Panel shall have
BACKNET CARD for integration. (UL 9th Edition Approved and NFPA/ EN54 or latest amended upto date)
5 Nos.
938.00 Supply, Installation , Testing & Commissioning of the GUI based main network Fire Detection must be capable of graphically representing each facility item1195
being monitored with floor plans and icons depicting the actual locations of the various systems; and / or sensors’ locations. The GUI software shall be
located in control room in one of the Floors and shall monitor all the Floor Fire Detection, Digital voice evacuation system and 2 way communication
panel connected with each other through fibre optics. The software shall provide the facility to Monitor, Control all the Digital voice evacuation system as
well as 2 way communication from main control room using voice signals over Fire Network along with the Fire detection signal. The software shall be
capable of broadcasting on Voice over IP. (UL 9th Edition Approved and NFPA compliant)
a. Operator work station with PC having Intel Pentium I7 Processor including Serial ports (RS232) and USB ports and following accessories etc. complete
with software all as specified.
b. 8 Gigabytes of RAM memory
c. 2 TB of hard disk space
d. DVD ROM
e. 21” LED colour monitor
f. Mouse with Mouse Pad
g. Standard Key Board
h. Latest Windows Operating System
i. Compatible Fire Alarm System Control Software
j. Laser Printer colour A4- 1 No
k. Software for Automatic Fire Detection and Alarm System
l. Software for Aspiration Based Smoke Detection System
m. UPS 800 VA or better
3 Nos.
939.00 Supply, Installation , Testing & Commissioning of Network Repeater Panel with 640 characters; The LCD shall Display all events / detectors, devices status item1196
of complete systems in the networked, The NRP shall be equipped with 5.1" touch screen / QWERTY/ alphanumeric Keypad. Mounting options include an
annunciator box, and blank modules are required for mounting. (UL 9th Edition Approved and NFPA compliant/ EN54 or latest amended upto date)
3 Nos.
940.00 Supply, Installation , Testing & Commissioning of Analog addressable Photoelectric Laser type detector/very early warning detector with mounting item1197
based LED, Address Switch to programme the detectors. (UL 9th Edition Approved and NFPA 76/318 compliant/ EN54 or latest amended upto date)
5 Nos.
941.00 Supply, Installation, Testing & Commissioning of Automatic Analog addressable multicriteria detector (smoke+heat) with auto floating sensitivity (to item1198
avoid resetting manually), mounting base LED, Address/ Electronic Switch to programme the detectors. (UL 9th Edition Approved and NFPA compliant/
EN54 or latest amended upto date)
98 Nos.
942.00 Supply, Installation, Testing & Commissioning of Automatic Analog addressable smoke detector with auto floating sensitivity, mounting base LED, item1199
Address/ Electronic Switch to programme the detectors complete as required. (UL 9th Edition Approved and NFPA compliant/ EN54 or latest amended
upto date)
5880 Nos.
943.00 Supply, Installation, Testing & Commissioning of Automatic Analog addressable heat detector with rate of rise and fixed, mounting base LED, Address/ item1200
Electronic Switch to programme the detectors complete as required. (UL 9th Edition Approved and NFPA compliant/ EN54 or latest amended upto date)
15 Nos.
944.00 Supply, Installation, Testing & Commissioning of Automatic Analog addressable duct detector with auto floating sensitivity, mounting base LED, Address/ item1201
Electronic Switch to programme the detectors complete as required. (UL 9th Edition Approved and NFPA compliant/ EN54 or latest amended upto date)
10 Nos.
945.00 Supplying, installation, testing & commissioning of Response Indicator which consists of steady glowing LED. This LED shall be mounted within a M.S. box item1202
and connected in parallel to the built in indicator of the detector as per specifications. The RI shall come "ON" as soon as the detector activates complete
in all respects as per specification.
2524 Nos.
946.00 Supply, Installation, Testing and Commissioning of Addressable type Manual call (Pull down type) Station complete with, all accessories as per item1203
specifications. (UL 9th Edition Approved/ EN54 and NFPA compliant or latest amended upto date) complete as required.
309 Nos.
947.00 Supply, Installation, Testing & Commissioning of supply with sounder with 20 Hz to 20KHz operating frequency with minimum 8 distinct sound patterns/ item1204
multitone to indicate Exit doors and direct occupants for safe and fast evacuation , complete with MS Powder coated Junction Box for mounting on
Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling as specified in NFPA 72 - 2007 edition. (UL Listed/ EN54 or latest amended
upto date)
309 Nos.
948.00 Supply, Installation , Testing & Commissioning of Strobe Light as per the system requirement. (UL Listed/ EN54 or latest amended upto date) item1205
309 Nos.
949.00 Supply, Installation, Testing and Commissioning of 2 way communication Fire Fighter's Telephone Jack fitted on wall including the cost of breaking and item1206
making good the wall wherever required, complete in all respects as per specifications. (UL 9th Edition Approved and NFPA compliant/ EN54 or latest
amended upto date) complete as required.
309 Nos.
950.00 Supply, Installation, Testing and Commissioning of 2 way communication Fire Fighter's Handset complete with all accessories as per specifications. item1207
5 Nos.
951.00 Supply, Installation, Testing and Commissioning of fault isolator for isolating shorted, dewired and loose circuits between two successive fault isolators item1208
with automatic resetting arrangement complete in all respects as per specifications. (UL 9th Edition Approved and NFPA / EN 54 compliant) complete as
required.
294 Nos.
952.00 Supply, Installation, Testing and Commissioning of Addressable monitor modules for Sprinkler Flow Switch as required. (UL 9th Edition Approved and item1209
NFPA compliant/ EN54 or latest amended upto date) complete as required.
216 Nos.
953.00 Supplying, Installing, Testing and Commissioning of addressable Control Module with relay etc. for Sounder, AHU, Fire Dampers, Smoke Ventilation item1210
complete as required and as per specifications. (UL 9th Edition Approved and NFPA compliant/ EN54 or latest amended upto date) complete as required.
294 Nos.
954.00 Supplying, Installing, Testing and Commissioning of Intelligent Addressable Beam detector with transmitter & receiver with complete addressable item1211
modules capable of being addressed electronically. (UL 9th Edition Approved and NFPA compliant/ EN54 or latest amended upto date) complete as
required.
47 Nos.
W ASPIRATION DETECTION SYSTEM 0 0
955.00 Supply, installation, testing and commissioning of addressable aspiration detector with BLUE LED Based Aspiration Detection Unit for area coverage of item1212
28000 Sq. Feet with sensitivity ranging as per specifications along with 8 relay outputs, 3 stage filtration with TCP/IP network capability. The unit should
be UL and FM approved complete as per specifications. The cost will include monitored Power Supply Unit for above detector 230 V AC to 24 V DC 1.5
Amp with 24 hour battery backup in normal condition and 30 minutes in alarm condition etc. complete with as per specifications. (UL 9th Edition
Approved/ EN54 and NFPA compliant or latest amended upto date)
78 Nos.
956.00 Supply, installation, testing and commissioning of capillary Sampling Points with length upto 1.5 mtrs. including accessories etc. complete in all respect, as item1213
per specifications.
676 Nos.
957.00 Supply, installation, testing and commissioning of Sampling holes complete in all respect, as per specifications. item1214 5830 Nos.
958.00 Supply, installation, testing and commissioning of 25 mm OD Fire Retardant CPVC PIPE complete in all respect with Tees, Bends complete as per system item1215
requirement.
17485 Ms
959.00 Supply, installation, testing and commissioning of End Caps for 25 mm OD Fire Retardant CPVC PIPE complete in all respect as per system requirement. item1216
295 Ms
960.00 Providing, laying, connecting, testing & commissioning twisted pair shielded pvc insulated cable 2core 1.5sq.mm ISI marked for fire telephone jack system item1217
including all accessories complete as required.
6180 M
961.00 Providing and laying, connecting, testing & commissioning of 2 Core 1.5 Sq. mm , Glass Mica taped, with Cross Linked Halogen Free insulation, overall item1218
screened, HFLS, sheathed, fire resistant copper conductor twisted pair cable. The cable shall have C/W/Z rating to withstand temperature of 950°C
complete with all accessories, terminations, glands etc. as per specification in all respect (FM Approved) as per BS 6387, BS 50200, basic design as per BS
7629.
73028 M
962.00 Dismantling from existing terminal building, reinstalling in new terminal building, connecting, testing & commissioning of existing fire alarm panel of item1219
existing terminal building including all required accessories complete as per the system requirement & approved by the engineer incharge.
1 Job
X AUTOMATIC BI-PARTING SLIDING DOOR 0 0
963.00 Providing and fixing of frameless Automatic bi-parting sliding door as approved for clear opening (size 2400x2000)mm modular design, including internal item1220
cover, eagle sensors on both sides, Electro mechanical lock, light barriers and programmer switch complete, With Operator Dimensions (L x H x T): not
exceeding 4200x190x100 mm. The track profile should be separate from the main profile for enabling reduction in vibration. Microprocessor control, self-
learning, reversing when obstruction is encountered. Microprocessor-controlled control unit. It should be Self-learning, with adjustable parameters for
opening and closing speed, hold-open time and opening and closing force. Class of protection IP 20. The glasses shall be of 12mm clear toughened
frameless with polished edges. The system shall have constant power supply 230V, 50/60Hz (by others), for various opening sizes all complete as per
design and instructions of Engineer-in-Charge.
30 Nos.
TOTAL AUTOMATIC BI-PARTING SLIDING DOOR WORK 0 0
PACKAGE: (B) - HVAC WORKS 0 0
A HVAC Work A 0.00 0.00
964.00 WATER COOLED CENTRIFUGAL CHILLERS WITH VFD: 964 0 0
Supplying, Installing, testing & commissioning of centrifugal water chilling machines (AHRI certified) having actual capacity of 1000 TR at site condition,
suitable for operation on refrigerant R-134a comprising of the following complete as per specification & as required.
0 0
i) - Single / Multiple centrifugal type compressor semi-hermetic complete with automatic capacity control, safety switches, speed increasing gears, forced
feed lubrication system etc. as per specifications.
0 0
ii) - The unit shall be designed to unload upto 20% of its rated capacity at Constant Condenser Water Entering Temperature & at AHRI conditions. The
compressor shall have mechanism for stable operation at part loads.
0 0
iii) - Suitable capacity squirrel cage induction motor suitable for operation on 415 ±10% V, 50HZ, AC Supply. 0 0
iv) - Unit mounted factory fitted / Free standing(UL listed) with interconnection of power and control at site with copper cable, air/liquid/refrigerant
cooled with heat balancing Variable Frequency Drive (IP 55) with active harmonic filters to limit THID to 5% at equipment level and suitable for
compressor motor complete with ammeter with CTs, overload protection, under voltage protection, protection against phase reversal and independent
single phase preventors etc. complete as required. VFD shall be separate with each compressor. in case free standing, VFD's shall be sourced along with
the chilling unit from same source.
0 0
v) - Necessary drive arrangement 0 0
vi) - 1 Set- Lubrication device consisting of Automatic Electric Oil Pump, oil cooler, head tank, oil strainer, automatic pressure regulating valve, oil heater,
thermal switch etc. as per specifications.
0 0
vii) - 1 No. matching Water Shell & Tube Cooled Condenser of MS shell, integrally finned copper tubes. 0 0
viii) - Automatic Tube Cleaning System for condenser. 0 0
ix) - 1 No. matching shell & tube chiller of M.S. shell, copper tubes. 0 0
x) - 1 Lot - Refrigerant piping fittings, valves & accessories to interconnect compressor, condenser, chillers & expansion valve. 0 0
xi) - 1 Set - Microprocessor based control panel complete with accessories as per specifications & shall be BMS compatible. 0 0
xii) - Lot - Refrigerant line accessories comprising of safety valves, angle valves, liquid line indications, liquid level control etc. 0 0
xiii) - Lot - Water flow switches for condenser and chiller, water drain and air purge valves wherever required. 0 0
xiv) - Lot- Suction line & chiller insulation duly insulated at manufacturer works as required. 0 0
Lot- Frame work for mounting the above condenser, chiller compressor and motor with base plate complete with antivibration pads/springs including
PCC/RCC foundation as per OEM recommendation.
0 0
xvi) - Lot- Initial/first charge of refrigerant gas and compressor oil. 0 0
xviii) - Lot- Necessary vibration isolation mountings for the chilling unit as per manufacturer's drawing. 0 0
Chiller: 0 0
Chilled Water In - 56°F (13.3°C) 0 0
Chilled Water Out - 44°F (6.7°C) 0 0
Chilled Water Flow - 2000 USGPM 0 0
Chiller Fouling Factor (as per IS 16590 : 2017) - 0.00025 ft2.h.oF / Btu 0 0
Condenser: 0 0
Condenser Water In - 89°F (31.7°C) 0 0
Condenser Water Out - 99°F (37.2°C) 0 0
Condenser Water Flow - 3000 USGPM 0 0
Condenser Fouling Factor (as per IS 16590 : 2017) - 0.0005 ft2.h.°F/Btu 0 0
Minimum COP at AHRI conditions - 6.3 0 0
Maximum IPLV at AHRI conditions - 0.38 0 0
Maximum NPLV at above conditions - 0.39 0 0
Actual Capacity - 1000 TR 0 0
(3 Working + 1 Standby) 4 Nos.
965.00 CHILLER PLANT MANAGER 965
a) - Supply, installation, testing and commissioning of CHILLER PLANT MANAGER as per specifications to control and monitor chillers and other auxiliary
equipment in the plant room and to provide output in Bacnet over IP. The cost to be inclusive of supplying & installing all necessary accessories as
required to complete the installation. All necessary sensors and cabling shall be included.
0 0
i) - Water Cooled Chillers of 1000 TR - 4 Nos. (3W+1S) 0 0
ii) - Hot Water Generators of 500 KW - 4 Nos. (3W+1S) 0 0
iii) - Condenser Water Pumps - 4 Nos. (3W+1S) 0 0
iv) - Primary Chilled Water Pumps - 4 Nos.(3W+1S) 0 0
v) - Variable Secondary Chilled Water Pumps - 4 Nos.(3W+1S) 0 0
vi) - Variable Hot Water Pumps - 4 Nos. (3W+1S) 0 0
vii) - Cooling Towers - 4 Nos.(3W+1S) 0 0
viii) Twin Pump Pressuriation Unit with Pressureless Expansion tank with built-in De-aerator & automatic water makeup - 2 Set 0 0
b) - Supply, installation, testing and commissioning of CHILLER PLANT OPTIMIZER along with chiller optimiser including all sensors and software with open
protocol. The plant Manager should have minimum I/O point as per attached summary and details given below
0 0
c) - Supplying, Installing, Testing & Commissioning of the Central Control Stations consisting of Operator Workstation Intel I7 +Processor(Latest
Technology) with min 1 TB HDD, min 8 GB RAM, 2 GB Enhanced graphic Card, DVD Combo Drive, Ethernet Port with Dual Screen Ports. With Windows
XP Pro /Windows 8.1 License suitable to BMS software or any latest version of OS with Anti virus As per Specification. MS office package to be provided
Location: HVAC Plant Room - 1 Lot.
0 0
d) - 24" colour monitor flat screen LED display with complete wall mounted /table mounted Brackets as per specifications- 1 Lot. 0 0
e) - SOFTWARES 0 0
i) - Supply, installation, testing & commissioning of the Software for CPO System as per technical Specifications with minimum 5 nos. of web license.
Supervisory controller should be directly Integrated with BMS server on BACnet over IP. Software shall have the capacity to accommodate hard points as
per IO summary.
0 0
ii) - Supply, installation, testing and commissioning of software interface with PUMPS / Cooling Tower VFD (16 Nos.) for two way flow of data between
CPO and panels. The price shall include the necessary integrator required for integration and also the networking of all chiller panels. All VFD's will be
integrated on Open Protocol over IP with CPO (VFD quantity are mention in IO Summary)- 1 Lot
0 0
iii) - Supply, installation, testing and commissioning of software interface for Energy Meter (24 Nos. ) for Chillers, Primary Pumps, condenser water Pumps
and Cooling Towers .The price shall include the necessary integrator / gateway required for integration. All EMs will be integrated on open Protocol over
IP with CPO ( Load Optimizer /Energy meter quantity are mention in IO Summary)- 1 Lot
0 0
f) - CPO SYSTEM DEVICES 0 0
Supply, Installation, testing & Commissioning of equipment for CPO Stand alone Microprocessor based 32 Bit, UL Listed DDC Controllers with BACnet
testing lab certified (BTL) & Network & Supervisory controller on BACnet/IP units for connecting all field DDC controllers as per the specifications for hard
wired IO points. The contractor shall decide upon the number of controllers, depending on his Controller capacity. Expandable modules for
Inputs/Outputs. Plug in relays of OMRON/FINDER make, DDC shall be with all accessories & shall be suitable for future expansion. Contractor shall furnish
quantity and unit rate for each type of controller considered by him. The above shall be housed in IP45, lockable ,Standard Power Supply, Secure MS
powder coated Cabinets to be supplied along with the DDC Controllers Connecting Cables. The CPO should be seamlessly Integrated with BMS on Bacnet
Over IP Protocol. Necessary cabling from field devices to plant Optimizer shall be included- 1 Lot.
0 0
g) - SENSORS & FIELD DEVICES 0 0
Supply, Installation, testing & Commissioning of following equipment for BAS 0 0
i) - Pressure transmitters for measuring pressure in water (0-16 Kg/cm. sq). Price should be with all necessary fittings & Accessories to install the same as
per Specification- 2 Nos.
0 0
ii) - Water Differential pressure switches across the pumps for indicating the pumps Run status. Price should be with all necessary fittings & Accessories
to install the same as per Specification- 17 Nos.
0 0
iii) - Water Differential pressure Transmitter (0-8 Kg/cm. sq) across the Evaporator for measuring the flow. Price should be with all necessary fittings &
Accessories to install the same as per Specification- 4 Nos.
0 0
iv) - Water Differential pressure Transmitter (0-2 Kg/cm. sq) across hydraulically furthest AHUs. Price should be with all necessary fittings & Accessories
to install the same as per Specification- 1 Nos.
0 0
v) - Level transmitter suitable for mounting in cooling tower basin for high-low level monitoring as per technical Specification- 4 Nos. 0 0
vi) - Immersion Temperature Sensor with Thermowell as per technical Specification- 16 Nos. 0 0
vii) - Outside Air Temperature &Humidity Sensor as per technical Specification- 1 No. 0 0
viii) - 2 C x 1.5 Sqmm ATC Shielded armoured cable - 1000 RMT. 0 0
ix) - 2 Pair 18 AWG Shielded ATC armoured communication cable - 500 RMT. 0 0
Chiller Plant Manager as above 1 Job
966.00 ELECTRIC HOT WATER GENERATOR : 966
Supply, installation, testing & commissioning of package type Electric Hot Water Generator constructed out of MS sheet (as per specifications) having top
openable cover for easy access and removal of heaters. The HWG shall be suitable for indoor mounting. The generator shall be provided with minimum
75 mm thick fibre glass insulation finished with 0.8mm/22G aluminium cladding sheet. The heater shall be electrical resistance type, copper tube with
chromium plating. The generator shall be complete with water flow switch, pressure gauge with ball valve, master and bank thermostats, rubber flexible
connections at suction and discharge, drain valve etc. The generator shall be suitable for 3 phase, 415+/- 10% V, 50 Hz, AC supply. The generator shall
complete with self-contained incoming isolation, ammeter, voltmeter, contactors for heater banks in 10 steps complete with manual/auto switches.
(Heater Bank to be provided with minimum 10 steps.)
Flow Rate - 380 USGPM
Water ‘IN’ temperature - 45 deg C
Water ‘OUT’ temperature - 50 deg C
Capacity (3 Working ) - 500 KW
3 Nos.
967.00 PRIMARY PUMPS: 967
Supply, installing, testing & commissioning of Centrifugal Horizontal, End-Suction, Top Discharge Primary Chilled Water Pumps, complete with CI body,
bronze or gun metal impeller with stainless steel shaft, bronze or gun metal shaft sleeve, mechanical shaft seals and flexible coupled with electric motor
for re-circulation of water for the central air conditioning system. The pump shall be flexible coupled protected by OSHA compliant coupling guard. All
pumps shall be aligned properly as required. The pump motor shall be TEFC squirrel cage induction motor having efficiency class IE3 (as per IS 12615)
with class 'F' insulation, 1500 RPM synchronous speed, operating on 415 V +/- 10%, 3 phase, 50 Hz AC supply. The motor shall be non- overloading type.
Pumps will be with performance characteristics as given below. The pump and motor shall be mounted on a common base plate. Pump set shall be
complete with thermal insulation same as chilled water pipes, aluminium cladding at suction and discharge, necessary anti vibration pads, MS base plate,
coupling guard, and all other accessories complete as required. .
Chilled Water Primary Pumps
Water Flow Rate - 2000 USGPM
Head - 12 M of Water
RPM - 1450
Efficiency - 80% or more
(3 Working & 1 Standby)
4 Nos.
968.00 SECONDARY CHILLED WATER/HOT WATER PUMPS WITH VFDS : 968 0 0
Supply, installing, testing & commissioning of Centrifugal Horizontal, End-Suction, Top Discharge Secondary Chilled / Hot Water Pumps with VFD,
complete with CI body, bronze or gun metal impeller with stainless steel shaft, bronze or gun metal shaft sleeve, mechanical shaft seals and flexible
coupled with electric motor for re-circulation of water for the central air conditioning system. The pump shall be flexible coupled protected by OSHA
compliant coupling guard. All pumps shall be aligned properly as required. The pump motor shall be TEFC squirrel cage induction motor efficiency class
IE3 (as per IS 12615) with class 'F' insulation, 1500 RPM synchronous speed, operating on 415 V +/- 10%, 3 phase, 50 Hz AC supply. The motor shall be
non- overloading type. Pumps will be with performance characteristics as given below. The pump and motor shall be mounted on a common base plate.
Pump set shall be complete with thermal insulation same as chilled water pipes, cladding, rubber flexible connections (PN-16) at suction and discharge,
necessary anti vibration pads, MS base plate, coupling guard, and all other accessories complete as required.
0 0
i) - Electrical control panel capable of cyclic operation of pumps - Pump working sequence should change after every operation. Control panel with
programmable logic controller (PLC) with inbuilt PID controller, digital display (showing electrical parameters like Voltage, Current and Power
consumption (both kW and kW.hr.) as well as % speed indication and /or % frequency indication) with fluorescent screen with two lines of min. 20
character each and equipped with function keys and service keys. 3 phase, 415 ± 10% Volts, AC, Air-cooled IP-55 Variable Speed Drive for each pump of
suitable capacity rating having standard function of BI loop, energy saving catching a spinning load with speed search, auto hunting jog preset speeds,
controlled stop on loss of supply powerloss side through, DDC injection breaking fast stop.
0 0
ii) - Microprocessor based control panel shall have suitable hardware & software, compatible with BMS so that it can be integrated directly with standard
communication open protocol using backnet / Modbus as well as open IP
0 0
iii) - All pumps shall be provided with individual VFD for each pump. Control panel should also consist of cooling fan. 0 0
iv) - VFD shall have provision for manual setting of cooling / heating mode. 0 0
v) - One panel for each set of secondary pumps will be provided. 0 0
vi) - Differential Pressure Sensors & Transmitters as required. 0 0
vii) - Suitable flanged suction and delivery connections. 0 0
viii) - The entire system along with pumps & VFD as described above shall be sourced from single manufacturer only. 0 0
The system shall be complete in all aspects and suitable for following configuration 0 0
968.01 SECONDARY CHILLED WATER PUMPS 968.01
Water Flow Rate - 2000 USGPM
Head - 35 M of Water
RPM - 1450
Efficiency - 80% or more
(3 Working & 1 Standby)
4 Nos.
968.02 HOT WATER PUMPS 968.02
Water Flow Rate - 380 USGPM
Head - 25 M of Water
RPM - 1450
Efficiency - 80% or more
(3 Working & 1 Standby)
4 Nos.
969.00 CONDENSER WATER PUMPS: 969
Supply, installing, testing & commissioning of Centrifugal Horizontal, End-Suction, Top Discharge Condenser Water Pumps, complete with CI body, bronze
or gun metal impeller with stainless steel shaft, bronze or gun metal shaft sleeve, mechanical shaft seals and flexible coupled with electric motor for re-
circulation of water for the central air conditioning system. The pump shall be flexible coupled protected by OSHA compliant coupling guard. All pumps
shall be aligned properly as required. The pump motor shall be TEFC squirrel cage induction motor efficiency class IE3 (as per IS 12615) with class 'F'
insulation, 1500 RPM synchronous speed, operating on 415 V ± 10%, 3 phase, 50 Hz AC supply. The motor shall be non- overloading type. Pumps will be
with performance characteristics as given below. The pump and motor shall be mounted on a common base plate. Pump set shall be complete with
rubber flexible connections (PN-16) at suction and discharge, necessary anti vibration pads, MS base plate, coupling guard, and all other accessories
complete as required.
Water Flow Rate - 3000 USGPM
Head - 30 M of Water
RPM - 1450
Efficiency - 80% or more
(3 Working & 1 Standby)
4 Nos.
970.00 COOLING TOWER: 970
Supplying, installing, testing & commissioning of "CTI" certified FRP Induced draft twin cell cooling towers. Fan and motor shall be suitable for VFD. Each
tower shall be complete with direct driven fans, FRP basin, casing, distribution system, filling, louvers, HDG supporters, GI ladders, cement concrete
foundation, steel/masonry supporting structure, anti vibration mounting etc. TEFC motors class IE3 (as per IS 12615) with IP-55 weather protection,
suitable for 415±10% Volt, 50 cycles 3 phase power supply meeting criterion as per ASHRAE standard 90.1-2007 and high efficiency. Isolator enclosed in
weather proof panel with MCCB and emergency power-off push buttons (EPO) at cooling tower and earthing shall also be included. Tower for air-
conditioning system shall be selected on the basis of water IN temperature 99°F - OUT temperature 89°F and ambient wet bulb 84°F. Selected cooling
tower shall be certified for test procedure as per CTI ATC-105 & CTI STD-201. The cooling tower shall be as follows:
Cooling Tower as described above suitable for 1000 TR Water Cooled Chillers.
Heat Rejection Capacity - Suitable for 15,000,000 Btu/Hr
Water Flow rate - 3000 USGPM
Condenser Water In - 99°F (37.2°C)
Condenser Water Out - 89°F (31.7°C)
(3 Working & 1 Standby)
4 Nos.
971.00 AIR HANDLING UNITS : 971 0 0
Supply, Installation, Testing and commissioning of factory built floor mounted double skin type horizontal/vertical air handling units “EUROVENT
CERTIFIED” having minimum efficiency grade "A" made of 25 ± 2 mm thick panels fabricated with aluminium extruded thermal break profile sections
consisting of pre-plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation of density 40 ±
2 kg/m3 factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as
required, minimum 2 bend GSS/PVC eliminators, cooling/heating coil sections with aluminium finned copper tubes (tubes thickness not less than 0.5
mm) cooling coil of 6 row and heating coil 2 row deep, filter section with 50 mm thick metal viscous/ washable synthetic type air prefilters (MERV-8), and
Electronic Air Cleaner complete with washable pre-filter, charging section and collector section capable of removing particulates as small as 0.01 microns
including microscopic haze particles, smoke, dust, mould spores and bacteria in supply air stream(wherever applicable scheduled separately), fire rated
flexible connection, belt drive package with TEFC drive motor of efficiency class IE3 (as per IS 12615) suitable for 415 ± 10% V, 50Hz, 3 Phase AC supply
suitably designed for variable frequency drive applications, drain connections, stainless steel (18G) drain pan with PUF insulation, auto purge valve
wherever required, necessary vibration isolation arrangement etc. complete as per specification and of following capacities.
0 0
i) - Supply air centrifugal fan with efficiency more than 75%. 0 0
ii) - Face velocity across filters shall be 500 FPM & across coil shall be 500 FPM. 0 0
iii) - Fan belt drive package. The fan and motor shall be mounted on aluminium extruded section. 0 0
iv) - Fan outlet velocity not exceeding 9.2 m/s (1800 FPM). 0 0
v) - Static pressure of AHU shall be checked by Vendor. 0 0
vi) - Sound level at 1 m distance to not exceed 60 dBA. Sound attenuators in supply & return air streams shall be provided if required to meet the
specified sound level in both supply & return air ducts.
0 0
vii) - Fire rated flexible connection shall be double canvas sleeve with sandwitch of 25 mm thick fiber glass insulation. 0 0
Note: 0 0
a) - Coil shall be designed for following parameters: 0 0
Chilled Water IN / OUT - 44 / 56 °F 0 0
Hot Water IN / OUT - 50 / 45 °C 0 0
b) - Cooling / Heating capacity shall be as per approved heat load. 0 0
c) - Coil selection shall be got approved. 0 0
Air moving capacity shall be as follows: 0 0
971.01 4500 CFM, 8.0 TR, WH = NA KW, SP= 50 mmwg 971.01 1 Nos.
971.02 5000 CFM, 11.0 TR, WH = 13 KW, SP= 70 mmwg 971.02 1 Nos.
971.03 6000 CFM, 17.0 TR, WH = 14 KW, SP= 70 mmwg (I/C space provision for Electronic Air Cleaner) 971.03 1 Nos.
971.04 6000 CFM, 11.0 TR, WH = 16 KW, SP= 70 mmwg (I/C space provision for Electronic Air Cleaner) 971.04 1 Nos.
971.05 6500 CFM, 21.0 TR, WH = 14 KW, SP= 70 mmwg (I/C space provision for Electronic Air Cleaner) 971.05 1 Nos.
971.06 7500 CFM, 23.0 TR, WH = 19 KW, SP= 70 mmwg (I/C space provision for Electronic Air Cleaner) 971.06 1 Nos.
971.07 7500 CFM, 23.0 TR, WH = 19 KW, SP= 70 mmwg (I/C space provision for Electronic Air Cleaner) 971.07 1 Nos.
971.08 7500 CFM, 23.0 TR, WH = 19 KW, SP= 70 mmwg (I/C space provision for Electronic Air Cleaner) 971.08 1 Nos.
971.09 8500 CFM, 14.0 TR, WH = 14 KW, SP= 70 mmwg 971.09 1 Nos.
971.10 9000 CFM, 22.0 TR, WH = 30 KW, SP= 70 mmwg 971.1 1 Nos.
971.11 10500 CFM, 24.0 TR, WH = 27 KW, SP= 70 mmwg 971.11 1 Nos.
971.12 10000 CFM, 23.0 TR, WH = 22 KW, SP= 70 mmwg 971.12 1 Nos.
971.13 10000 CFM, 24.0 TR, WH = 38 KW, SP= 70 mmwg 971.13 1 Nos.
971.14 11000 CFM, 24.0 TR, WH = 25 KW, SP= 70 mmwg 971.14 1 Nos.
971.15 11000 CFM, 28.0 TR, WH = 38 KW, SP= 70 mmwg 971.15 1 Nos.
971.16 12000 CFM, 31.0 TR, WH = 27 KW, SP= 70 mmwg (I/C space provision for Electronic Air Cleaner) 971.16 1 Nos.
971.17 13000 CFM, 28.0 TR, WH = 32 KW, SP= 70 mmwg (I/C space provision for Electronic Air Cleaner) 971.17 1 Nos.
971.18 13000 CFM, 28.0 TR, WH = 32 KW, SP= 70 mmwg 971.18 1 Nos.
971.19 13500 CFM, 27.0 TR, WH = 30 KW, SP= 70 mmwg (I/C space provision for Electronic Air Cleaner) 971.19 1 Nos.
971.20 14000 CFM, 34.0 TR, WH = 52 KW, SP= 70 mmwg (I/C space provision for Electronic Air Cleaner) 971.2 2 Nos.
971.21 16000 CFM, 40.0 TR, WH = 40 KW, SP= 70 mmwg (I/C space provision for Electronic Air Cleaner) 971.21 1 Nos.
971.22 16000 CFM, 40.0 TR, WH = 36 KW, SP= 70 mmwg 971.22 1 Nos.
971.23 17000 CFM, 37.0 TR, WH = 38 KW, SP= 70 mmwg (I/C space provision for Electronic Air Cleaner) 971.23 1 Nos.
971.24 17000 CFM, 37.0 TR, WH = 38 KW, SP= 70 mmwg 971.24 1 Nos.
971.25 18000 CFM, 43.0 TR, WH = 39 KW, SP= 70 mmwg 971.25 2 Nos.
971.26 18000 CFM, 31.0 TR, WH = 49 KW, SP= 70 mmwg (I/C space provision for Electronic Air Cleaner) 971.26 2 Nos.
971.27 18000 CFM, 46.0 TR, WH = 63 KW, SP= 70 mmwg 971.27 1 Nos.
971.28 19000 CFM, 38.0 TR, WH = 50 KW, SP= 70 mmwg 971.28 1 Nos.
971.29 20000 CFM, 72.0 TR, WH = 59 KW, SP= 70 mmwg 971.29 1 Nos.
971.30 20000 CFM, 50.0 TR, WH = 50 KW, SP= 70 mmwg 971.3 1 Nos.
971.31 20000 CFM, 36.0 TR, WH = 37 KW, SP= 70 mmwg 971.31 2 Nos.
971.32 21500 CFM, 46.0 TR, WH = 50 KW, SP= 70 mmwg 971.32 1 Nos.
971.33 25000 CFM, 54.0 TR, WH = NA KW, SP= 65 mmwg 971.33 1 Nos.
971.34 26500 CFM, 67.0 TR, WH = 60 KW, SP= 70 mmwg 971.34 1 Nos.
971.35 27000 CFM, 54.0 TR, WH = 65 KW, SP= 70 mmwg 971.35 1 Nos.
971.36 27500 CFM, 58.0 TR, WH = 63 KW, SP= 70 mmwg 971.36 1 Nos.
971.37 28000 CFM, 66.0 TR, WH = 83 KW, SP= 70 mmwg 971.37 2 Nos.
971.38 28000 CFM, 58.0 TR, WH = 64 KW, SP= 70 mmwg 971.38 1 Nos.
971.39 30000 CFM, 77.0 TR, WH = 65 KW, SP= 70 mmwg 971.39 1 Nos.
971.40 30000 CFM, 78.0 TR, WH = 68 KW, SP= 70 mmwg 971.4 1 Nos.
971.41 30000 CFM, 55.0 TR, WH = NA KW, SP= 65 mmwg 971.41 1 Nos.
971.42 33000 CFM, 66.0 TR, WH = 118 KW, SP= 70 mmwg (I/C space provision for Electronic Air Cleaner) 971.42 2 Nos.
971.43 35000 CFM, 79.0 TR, WH = 72 KW, SP= 70 mmwg 971.43 2 Nos.
971.44 35000 CFM, 74.0 TR, WH = 57 KW, SP= 70 mmwg 971.44 1 Nos.
971.45 35000 CFM, 67.0 TR, WH = 58 KW, SP= 70 mmwg 971.45 4 Nos.
972.00 AIR HANDLING UNITS with Mixing Box: 972 0 0
Supply, Installation, Testing and commissioning of factory built floor mounted double skin type horizontal/vertical air handling units “EUROVENT
CERTIFIED” having minimum efficiency grade "A" made of 50 ± 4 mm thick panels fabricated with aluminium extruded thermal break profile sections
consisting of pre-plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation of density 40 ±
2 kg/m3 factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as
required, minimum 2 bend GSS/PVC eliminators, cooling/heating coil sections with aluminium finned copper tubes (tubes thickness not less than 0.5
mm) cooling coil of 6 row and heating coil 2 row deep, filter section with 50 mm thick metal viscous/ washable synthetic type air prefilters (MERV-8), fire
rated flexibel connection, belt drive package with TEFC drive motor of efficiency class IE3 (as per IS 12615) suitable for 415 ± 10% V, 50Hz, 3 Phase AC
supply suitably designed for variable frequency drive applications, Mixing box, drain connections, stainless steel (18G) drain pan with PUF insulation, auto
purge valve wherever required, necessary vibration isolation arrangement etc. complete as per specification and of following capacities.
0 0
i) - Supply air centrifugal fan with efficiency more than 75%. 0 0
ii) - Face velocity across filters shall be 500 FPM & across coil shall be 500 FPM. 0 0
iii) - Fan belt drive package. The fan and motor shall be mounted on aluminium extruded section. 0 0
iv) - Fan outlet velocity not exceeding 9.2 m/s (1800 FPM). 0 0
v) - Static pressure of AHU shall be checked by Vendor. 0 0
vi) - Sound level at 1 m distance to not exceed 60 dBA. Sound attenuators in supply & return air streams shall be provided if required to meet the
specified sound level in both supply & return air ducts.
0 0
vii) - Fire rated flexible connection shall be double canvas sleeve with sandwitch of 25 mm thick fiber glass insulation. 0 0
Note: 0 0
a) - Coil shall be designed for following parameters: 0 0
Chilled Water IN / OUT - 44 / 56 °F 0 0
Hot Water IN / OUT - 50 / 45 °C 0 0
b) - Cooling / Heating capacity shall be as per approved heat load. 0 0
c) - Coil selection shall be got approved. 0 0
Air moving capacity shall be as follows: 0 0
972.01 33500 CFM, 65.0 TR, WH = 52 KW, SP= 75 mmwg 972.01 1 Nos.
972.02 35000 CFM, 67.0 TR, WH = 58 KW, SP= 75 mmwg 972.02 4 Nos.
972.03 43000 CFM, 86.0 TR, WH = 67 KW, SP= 75 mmwg 972.03 2 Nos.
973.00 TREATED FRESH AIR UNITS : 973 0 0
Supply, Installation, Testing and commissioning of factory built floor mounted double skin type horizontal treated fresh air units “EUROVENT CERTIFIED”
having minimum efficiency grade "A" made of 50 ± 4 mm thick panels fabricated with aluminium extruded thermal break profile sections consisting of
pre-plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation of density 40 + 2 kg/m3
factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required,
minimum 2 bend GSS/PVC eliminators, cooling/heating coil sections with aluminium finned copper tubes (tubes thickness not less than 0.5 mm) cooling
coil of 6 row and heating coil 2 row deep, with Electronic Air Cleaner complete with washable pre-filter, fire rated flexible connection, charging section
and collector section capable of removing particulates as small as 0.01 microns including microscopic haze particles, smoke, dust, mould spores and
bacteria in supply air stream(scheduled separately), belt drive package with TEFC drive motor of efficiency class IE3 (as per IS 12615) suitable for 415 ±
10% V, 50Hz, 3 Phase AC supply suitably designed for variable frequency drive applications , drain connections, stainless steel (18G) drain pan with PUF
insulation, mixing box for fresh air duct connection, auto purge valve wherever required, necessary vibration isolation arrangement etc. complete as per
specification and of following capacities.
0 0
i) - Supply air centrifugal fan with efficiency more than 75%. 0 0
ii) - Face velocity across filters shall be 500 FPM & across coil shall be 500 FPM. 0 0
iii) - Fan belt drive package. The fan and motor shall be mounted on aluminium extruded section. 0 0
iv) - Fan outlet velocity not exceeding 9.2 m/s (1800 FPM). 0 0
v) - Static pressure of AHU shall be checked by Vendor. 0 0
vi) - Sound level at 1 m distance to not exceed 60 dBA. Sound attenuators in supply & return air streams shall be provided if required to meet the
specified sound level in both supply & return air ducts.
0 0
vii) - Fire rated flexible connection shall be double canvas sleeve with sandwitch of 25 mm thick fiber glass insulation. 0 0
Note: 0 0
a) - Coil shall be designed for following parameters: 0 0
Chilled Water IN / OUT - 44 / 56 °F 0 0
Hot Water IN / OUT - 50 / 45 °C 0 0
b) - Cooling / Heating capacity shall be as per approved heat load. 0 0
c) - Coil selection shall be got approved. 0 0
Air moving capacity shall be as follows: 0 0
973.01 TFA AR-01 OA = 18500 CFM, SA = 18500 CFM, 26.0 TR, WH = NA KW, SP= 65 mmwg 973.01 1 Nos.
973.02 TFA AP-01 OA = 21000 CFM, SA = 21000 CFM, 115.0 TR, WH = 147.0 KW, SP= 80 mmwg 973.02 1 Nos.
974.00 Supply, installation, testing and commissioning of Factory built Ceiling Suspended double skin type chilled water air handling units “EUROVENT 974
CERTIFIED” having minimum efficiency grade "A" made of 25 ± 2 mm thick panels consisting of pre plasticized G.I. casing of thickness 0.6 mm outside
layer and 0.6mm thick inside layer with polyurethane foam (PUF) insulation of density 40 + 2 kg/m3 factory injected between them by injection
moulding machine, complete with blower section with blower suitable for static pressure as required, cooling/heating coil sections with aluminium
finned copper tubes (tubes thickness not less than 0.5 mm) cooling coil of 4 row and heating coil 2 row deep, filter section with 50 mm thick metal
viscous/ washable synthetic type air prefilters (MERV-8), belt drive package with TEFC drive motor of efficiency class IE3 (as per IS 12615) suitable for 415
± 10% V, 50Hz, 3 Phase AC supply, drain connections with drain valve, stainless steel (18 G) drain pan with PUF insulation, fire rated flexible connection,
Descaling valve, auto air purge valve, necessary vibration isolation arrangement, fire retardant canvas connection along with suitable size of girder / pipes
for support etc., complete as per specifications and of following capacities. (The item shall include suitable rating TPN Isolator/starter arrangement
nearby with required cabling, interconnections etc. required to make the system complete working at site)
0 0
i) - Supply air centrifugal fan with efficiency more than 75%. 0 0
ii) - Face velocity across filters & coil shall be 500 FPM. 0 0
iii) - Fan belt drive package. The fan and motor shall be mounted on aluminium extruded section. 0 0
iv) - Fan outlet velocity not exceeding 9.2 m/s (1800 FPM). 0 0
v) - Static pressure of AHU shall be checked by Vendor. 0 0
vi) - Sound level at 1 m distance to not exceed 60 dBA. Sound attenuators in supply & return air streams shall be provided if required to meet the
specified sound level in both supply & return air ducts.
0 0
vii) - Height of Ceiling Suspended AHU upto 5000 CFM should not exceed 600 mm. 0 0
viii) - Fire rated flexible connection shall be double canvas sleeve with sandwitch of 25 mm thick fiber glass insulation. 0 0
Note: 0 0
a) - Coil shall be designed for following parameters: 0 0
Chilled Water IN / OUT - 44 / 56 °F 0 0
Hot Water IN / OUT - 50 / 45 °C 0 0
b) - Cooling / Heating capacity shall be as per approved heat load. 0 0
c) - Coil selection shall be got approved. 0 0
Air moving capacity shall be as follows: 0 0
974.01 1600 CFM/4.0 TR /WH-NA /SP= 40 mmwg 974.01 2 Nos.
974.02 1800 CFM/4.0 TR /WH-3.5 KW/SP= 45 mmwg 974.02 1 Nos.
974.03 1800 CFM/4.0 TR /WH-NA /SP= 40 mmwg 974.03 2 Nos.
974.04 2000 CFM/5.0 TR /WH-2.5 KW/SP= 45 mmwg 974.04 1 Nos.
974.05 2000 CFM/4.0 TR /WH-NA /SP= 40 mmwg 974.05 1 Nos.
974.06 2500 CFM/4.0 TR /WH-NA /SP= 40 mmwg 974.06 4 Nos.
974.07 3000 CFM/10.0 TR /WH-NA /SP= 40 mmwg 974.07 4 Nos.
974.08 4000 CFM/7.5 TR /WH-NA /SP= 40 mmwg 974.08 4 Nos.
974.09 4200 CFM/10.0 TR /WH-10 KW/SP= 40 mmwg 974.09 2 Nos.
974.10 5000 CFM/14.0 TR /WH-NA /SP= 40 mmwg 974.1 1 Nos.
974.11 7000 CFM/14.0 TR /WH-NA /SP= 40 mmwg 974.11 1 Nos.
975.00 Supply, Installation, testing & commissioning of horizontal FAN COIL UNITS(2 PIPE SYSTEMS), blow through type, with centrifugal fan, 3 speed motor, 3 975
rows cooling coil section, cleanable synthetic media filters, SS condensate drain pan with 9mm thick nitrile rubber insulation, GI casing with insulation,
coil connections through copper pipes, condensate drain connections, wiring, control wiring in conduit up to thermostat boxes mounted on wall,
Anchors, Hangers, Vibration isolators, fire rated flexible connection at blower discharge, air vent, ball valve set with and without strainer, cooling
thermostat with three speed controller for blower motor. Fan coil unit shall be provided with valve package comprising of pressure independent
Balancing cum Control Valve with integrated 2 way motorized actuator in a single body for modulating operation suitable for static pressure of 1600 kPa
and actuator shall be capable of withstanding 400 kPa shut off pressure, suitable for 24 V AC incoming power supply. Fan coil unit shall be suitable for 230
± 10% 50 Hz single phase power supply. Thermostat will be mounted on the wall at suitable location. Internal wiring between FCU and thermostat shall
be included. same valves shall be provided for hot water coil of similar pressure rating and specifications as described above.
0 0
975.01 1.0 TR nominal capacity - 400 CFM 975.01 20 Nos.
975.02 1.5 TR nominal capacity - 600 CFM 975.02 10 Nos.
975.03 2.0 TR nominal capacity - 800 CFM 975.03 5 Nos.
975.04 2.5 TR nominal capacity - 1000 CFM 975.04 5 Nos.
975.05 3.0 TR nominal capacity - 1200 CFM 975.05 1 Nos.
975.06 1.5 TR nominal capacity - 600 CFM ( High static Type) 975.06 14 Nos.
975.07 2.0 TR nominal capacity - 800 CFM ( High static Type) 975.07 4 Nos.
975.08 2.5 TR nominal capacity - 1000 CFM ( High static Type) 975.08 4 Nos.
975.09 3.0 TR nominal capacity - 1200 CFM ( High static Type) 975.09 6 Nos.
976.00 Supply, installation, testing and commissioning of the Ceiling mounted 4-way directional air discharge Hydronic Cassette units with centrifugal fan, 3 976
speed motor, 3 rows cooling coil section, cleanable synthetic media filters, SS condensate drain pan with 9mm thick nitrile rubber insulation, powder
coated galvanized steel housing, coil connections through copper pipes, condensate drain connections, wiring, control wiring in conduit up to thermostat
boxes mounted on wall, Anchors, Hangers, ball valve set with and without strainer, cooling thermostat with three speed controller for blower motor. The
unit shall be provided with valve package comprising of pressure independent Balancing cum Control Valve with integrated 2 way motorized actuator in a
single body for modulating operation suitable for static pressure of 1600 kPa and actuator shall be capable of withstanding 400 kPa shut off pressure,
suitable for 24 V AC incoming power supply. Fan coil unit shall be suitable for 230 ± 10% 50 Hz single phase power supply. Thermostat will be mounted on
the wall at suitable location. Internal wiring between FCU and thermostat is included. Same valve along with other valves shall be provided for hot water
coil of similar pressure rating and specifications as described above.
0 0
976.01 1 TR nominal capacity - 400 CFM 976.01 7 Nos.
976.02 2 TR nominal capacity - 600 CFM 976.02 56 Nos.
977.00 VARIABLE FREQUENCY DRIVE: 977
Supply, Installation, testing & commissioning of HVAC dedicated VFDs(including KWH display) with minimum IP 55 enclosures & disconnect, complying
with the tender specifications and having:
i) - THiD (IEEE519-1992) - 10%
ii) - EMC filter category - C1
iii) - PID controller feedback loops - 1
The system shall be complete in all respects and suitable for following motor rating:
0 0
977.01 37.0 KW 977.01 8 Nos.
977.02 22.0 KW 977.02 7 Nos.
977.03 18.5 KW 977.03 11 Nos.
977.04 15.0 KW 977.04 12 Nos.
977.05 11.0 KW 977.05 18 Nos.
977.06 7.5 KW 977.06 4 Nos.
977.07 5.5 KW 977.07 7 Nos.
977.08 4.0 KW 977.08 3 Nos.
977.09 3.0 KW 977.09 4 Nos.
978.00 HEAT RECOVERY VENTILATION UNIT 978
Supplying, installing, testing and commissioning of double skin type Heat Recovery Ventilation Units with heat recovery wheel, made of 25 ± 2 mm thick
panels consisting of pre plasticized G.I. casing of thickness 0.8 mm outside layer and 0.8 mm thick inside layer with polyurethane foam (PUF) insulation of
density 40 ± 2 kg/m3 factory injected between them by injection moulding machine. The unit shall comprise of filter section with Electronic Air Cleaner
complete with washable pre-filter, charging section and collector section capable of removing particulates as small as 0.01 microns including microscopic
haze particles, smoke, dust, mould spores and bacteria in supply air stream(scheduled separately) & pre-filter (MERV 8) in return air stream, heat
recovery wheel, fresh air inlet / exhaust air outlet, fire retardant flexible duct connection & aluminium volume control damper at air inlet & discharge,
exhaust & supply fan sections with DIDW backward curve fans (efficiency not less than 75%) suitable for static pressure as required, belt drive package
with TEFC drive motor of efficiency class IE3 (as per IS 12615) suitable for 415 ± 10% V, 50Hz, 3 Phase AC supply (the supply fan motor shall be suitably
designed for variable frequency drive applications), necessary vibration isolation arrangement etc. complete as per specification and of following
capacities. The unit shall be interconnected in a manner so as to receive exhaust air from toilets which shall be passed through HRW and transfer sensible
and latent cooling to incoming fresh air. The fresh air shall be mechanically supplied through vertical duct into each specified AHU rooms installed on
various floors. Minimum sensible & latent heat transfer efficiency of heat recovery system shall be 80%.
i) - The heat recovery unit shall be designed for ambient temperature of DBT=107.8 F & WBT=73 F for summer and DBT=92.8 deg F & WBT=84.45 F for
monsoon and exhaust air temperature of DBT=78 deg F & RH=60%.
ii) - Face velocity across filters & coil shall be 500 FPM.
iii) - Fan outlet velocity not exceeding 9.2 m/s (1800 FPM).
iv) - GI Volume control dampers shall be at air inlet & outlet openings of the unit.
v) - Static pressure shall be checked by Vendor.
Air moving capacities are as follows:
0 0
978.01 Supply Air - 34000CFM (80mmwg S.P.), Exhaust Air - 23500 CFM ( 80mmwg S.P.) 978.01 1 Nos.
978.02 Supply Air - 31000CFM (80mmwg S.P.), Exhaust Air - 23500 CFM ( 80mmwg S.P.) 978.02 1 Nos.
979.00 PRESSURE INDEPENDENT MOTORIZED BALANCING CUM CONTROL VALVE ( FOR COOLING APPLICATION): 979
Supply, installation, testing & commissioning of following sizes insulated electronic, self-balancing, pressure independent type dynamic balancing valve
with integrated 2 way modulating control valve in a single body. The actuator shall be capable of accepting upto 10V DC and upto 20 mA electric signal
and shall provide similar transduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50 mm
valves and 7 Bar for 65 mm & above. Valves should have pressure rating of 16 Bar minimum. The valves & actuators for AHU’s units shall be
compatible with Building Automation System.
0 0
979.01 100 mm dia Valves 979.01 7 Nos.
979.02 80 mm dia Valves 979.02 24 Nos.
979.03 65 mm dia Valves 979.03 17 Nos.
979.04 50 mm dia Valves 979.04 13 Nos.
979.05 40 mm dia Valves 979.05 8 Nos.
979.06 32 mm dia Valves 979.06 6 Nos.
979.07 25 mm dia Valves 979.07 24 Nos.
980.00 PRESSURE INDEPENDENT MOTORIZED BALANCING CUM CONTROL VALVE (FOR HEATING APPLICATION): 980
Supply, installation, testing & commissioning of following sizes insulated electronic, self-balancing, pressure independent type dynamic balancing valve
with integrated 2 way modulating control valve in a single body. The actuator shall be capable of accepting upto 10V DC and upto 20 mA electric signal
and shall provide similar transduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50 mm
valves and 7 Bar for 65 mm & above. Valves should have pressure rating of 16 Bar minimum. The valves & actuators for AHU’s units shall be
compatible with Building Automation System.
0 0
980.01 80 mm dia Valves 980.01 4 Nos.
980.02 65 mm dia Valves 980.02 4 Nos.
980.03 50 mm dia Valves 980.03 32 Nos.
980.04 40 mm dia Valves 980.04 7 Nos.
980.05 32 mm dia Valves 980.05 8 Nos.
980.06 25 mm dia Valves 980.06 2 Nos.
980.07 20 mm dia Valves 980.07 2 Nos.
981.00 THERMOSTAT (FOR COOLING & HEATING): 981
Supply, installation, testing and commissioning of THERMOSTAT for simultaneous cooling and heating. The thermostat shall be electronic room
temperature controller with digital display , capable of providing individual space temperature control for cooling / heating application. The controller
shall produce a dual output to cooling and heating coils in response to load change in rooms. The controller shall be designed to modulate two control
devices such as 2 way motorized valves in sequence i.e. either cooling / heating in 4 pipe system.
59 Nos.
982.00 THERMOSTAT ( FOR COOLING ONLY) : 982
Supply, installation, testing and commissioning of THERMOSTAT for cooling application. The thermostat shall be electronic room temperature controller
with digital display , capable of providing individual space temperature control for cooling application. The controller shall produce a single output to
cooling coils in response to load change in rooms. The controller shall be designed to modulate the control devices installed in chilled water system.
40 Nos.
983.00 Supply, installation, testing and commissioning of Floor Mounted, Bottom/Top discharge Chilled water type Single/Twin circuit Precision Air conditioners 983
of 49 KW Actual Sensible capacity & 10700 CFM (Actual sensible Capacity at return air temperature of 24 deg C DB & 50% RH and Chilled water
Inlet/Outlet temperature of 6.6 Deg C/13.3 Deg C.
The Indoor unit shall comprise of In-Floor/in-cabinet Evaporator Fan complete with Backward curved type with EC motor, chilled water cooling coil,
Microprocessor controllers, G4 Filter,2 way valve, Internal power and Control wiring, Power and Control contacts and Other Electrical accessories as per
specification.
The unit shall be suitable for operation on 415 Volts, 50 Hz, 3 Phase, 4 Wire AC supply. Each unit should be having individual display panel, which shall
display date, time, actual & set values, operating conditions, signal faults, collective faults, limiting values and PAC wellness alarm / service alarm to
reduce the down time and unit memory shall hold the 400 most recent events with ID number, time and date stamp for each event.
15.0 TR (2 W+2 S)
4 Nos.
984.00 DRY SCRUBBER: 984
Supply, Installation, Testing and Commissioning of Scrubber each comprising of extract air intake section, electrostatic precipitation technology, dry type
air cleaner to remove oil, smoke and fumes from exhaust air, as per the Specifications. The Unit shall Comprise of :
a)-Backward Inclined SISW Fan complete with TEFC Induction Motor, Belt Drive Assembly, Base Frame, Motor Base, Vibration Isolators and other
accessories like Belt Guard etc. Fan casing shall be of pre-platicized G.I construction made of 16 G thickness. Impeller shall be especially designed for
kitchen exhaust application wherein minimum backward inclined blades to be considered to facilitate easy cleaning and should be epoxy based powder
coated. Drain Plug shall also be provided. Motor shall be suitable for 415+10% volts, 50 cycles, 3 Phase AC supply.
b)-Electrostatic section shall be made of 16 gauge galvanised sheet, high bake epoxy powder coated, washable type aluminium mesh filters, stainless
steel spiked ionizers to create high voltage DC field, aluminum collector plates which should be alternatively charged positive and negative with large
collecting area with 14" deep cell, to work as magnet for charged smoke and oil particles. Average efficiency of 90-95% in single pass as per ASHRAE test
method. Electrostatic Precipitator should be able to charge particles from 0.01 micron to 10 microns through solid state power supply. Collector cell
should be of permanent type and incorporate slide out facility for easy removal for cleaning. Power supplies shall be 100% solid state UL Listed, Module
of capacity 3900 CFM & above shall be equipped with Pulse width modulating (PWM). The system should be fitted with interlock switch for safety .The
units should be BMS compatible for Run,Wash,Fault feedback, dry contact point. The system should allow connection to a fan section to achieve 500
FPM velocity across the air cleaner. The units should be with Auto Wash and V Shaped Adsorber Module feature as per specification.Operating Voltage :
220V, 50 Hz
Ionizing Voltage : 12.0 to 13 KVDC
Collector Cell Voltage : 6 to 6.5 KVDC
ESP Power Consumption : Not more than 85W per 7500CFM.
22500 CFM / 100 mm SP
1 Nos.
985.00 EVAPORATIVE COOLING SYSTEM (FILL TYPE) : 985
Supplying, installing, testing and commissioning of floor mounted CELLULOSE FILL AIR-WASHER complete with double skin construction fabricated out of
extruded aluminium sections with 0.8 mm thick pre-plasticised GI sheet on out side and 0.8 mm thick plane GI sheet inside with 25 mm thick insulation,
40 Kg/m3 density PUF insulation in between. The unit shall comprise of supply fan sections with DIDW backward curve fans (efficiency not less than 75%)
suitable for static pressure as required, minimum 2 bend GSS/PVC eliminators, belt drive package with TEFC drive motor of efficiency class IE3 (as per IS
12615) suitable for 415 ± 10% V, 50Hz, 3 Phase AC supply, giving 95% adiabatic saturation efficiency at 500 FPM air velocity across pads, factory
assembled and complete with 16 gauge GI casing for Air washer section, 18G SS-304 water tank, Cellulose fill, water distribution header, PVC piping,
butterfly valves, for quick fill, isolation of tank, pumps and brass strainers, Y strainers, fire rated flexible duct connections & aluminium volume control
damper at blower discharge and necessary fittings, belt drive package, necessary vibration isolation arrangement etc. complete as per specification and
of following capacities. The fan and motor shall be mounted on aluminium extruded section.
The quoted price shall also include provision of GSS partitions duly reinforced at intake side of air washer and GSS louvers with bird-screen synthetic
washable filters and four bend PVC drift eliminators. The price shall also include horizontal monoblock pumps of suitable rating, factory mounted on mild
steel channel base with electric motor for circulation of water. Pumps shall be aligned and suitable for 415±10% volts, 50 cycles 3 phase power supply.
One No. 3 phase isolator switch in weather proof enclosure shall be provided near motor.
0 0
985.01 DG Room 50,000 CFM, SP= 50 mm wg 985.01 5 Nos.
985.02 WTP 46,000 CFM, SP= 50 mm wg 985.02 1 Nos.
985.03 HVAC Plant Room 53,000 CFM, SP= 50 mm wg 985.03 1 Nos.
985.04 STP Plant Room 15,000 CFM, SP= 40 mm wg 985.04 1 Nos.
986.00 EXHAUST AIR AXIAL FLOW FANS : 986
Supplying, installation, testing and commissioning of AMCA Certified (For Air and Sound Performance) ceiling hung / floor mounted exhaust air vane axial
flow fans of following capacity with GSS casing/ standard M.S. construction and aluminium alloy impellers with high efficiency aero-foil sections, blades,
the impeller directly driven by TEFC induction motor should be of high efficiency class IE3 (as per IS 12615) suitable for 3 Phase 50 Hz 415V ± 10 %, of
class 'H' insulation, fire rated flexible connection etc. including all accessories complete as required and as per specifications. Motor shall be of high
temperature resistance "Class H Smoke Spill" 250° C for 2 hrs. Motor make shall be same as mentioned on the fire certificate. Fan total efficiency should
not be less than 70%, noise level should not be more than 75 db @ 3 m distance when measured in hemispherical reverberant room conditions. All the
fans shall be hot dip galvanized with minimum 220 GSM Zinc Coating and complete with bird screen at inlet. Suitable TP isolator within MS enclosure
should be provided. Gravity louvers will be provided at the discharge of the fan so as to avoid reverse flow. Static pressure shall be checked/verified by
contractor prior to order. Entire fan model & AMCA Seal shall appear in technical submittal of fan. Air moving capacity shall be as follows:
0 0
986.01 HT Room (Basement Mezzanine) 4000 CFM, SP= 20 mm wg 986.01 1 Nos.
986.02 33 KV RMU (service Yard) 6000 CFM, SP= 20 mm wg 986.02 1 Nos.
986.03 Corridor-1 (Arrival Level) 6500 CFM, SP= 20 mm wg 986.03 2 Nos.
986.04 Transformer Room (Basement Mezzanine) 8000 CFM, SP= 20 mm wg 986.04 1 Nos.
986.05 33 KV Room (service Yard) 10000 CFM, SP= 25 mm wg 986.05 1 Nos.
986.06 Corridor-1 (Mezzanine Level) 13000 CFM, SP= 25 mm wg 986.06 2 Nos.
986.07 STP Plant Room 15,000 CFM, SP= 25 mm wg 986.07 1 Nos.
986.08 LT Panel Room (service Yard) 16000 CFM, SP= 25 mm wg 986.08 1 Nos.
986.09 Corridor-5 (Mezzanine Level) 18500 CFM, SP= 25 mm wg 986.09 2 Nos.
986.10 11 KV Room (service Yard) 20000 CFM, SP= 25 mm wg 986.1 1 Nos.
986.11 Corridor-3 & Gate Rooms (Mezzanine Level) 20000 CFM, SP= 25 mm wg 986.11 4 Nos.
986.12 STP Equalisation Tank 20000 CFM, SP= 25 mm wg 986.12 1 Nos.
986.13 Services Tunnel 20000 CFM, SP= 20 mm wg 986.13 1 Nos.
986.14 WTP 23000 CFM, SP= 25 mm wg 986.14 2 Nos.
986.15 Corridor-4 (Mezzanine Level) 24000 CFM, SP= 25 mm wg 986.15 2 Nos.
986.16 DG Room 25000 CFM, SP= 25 mm wg 986.16 10 Nos.
986.17 Corridor-2 (Mezzanine Level) 26000 CFM, SP= 25 mm wg 986.17 2 Nos.
986.18 AC Plant Room 26500 CFM, SP= 25 mm wg 986.18 2 Nos.
986.19 Corridor-2 (Arrival Level) 27000 CFM, SP= 25 mm wg 986.19 1 Nos.
986.20 Immigration Area (Arrival Level) 27500 CFM, SP= 25 mm wg 986.2 4 Nos.
986.21 Services Tunnel 30000 CFM, SP= 20 mm wg 986.21 1 Nos.
986.22 LT Panel/ UPS/ Battery/ BMS/ Office (Basement Mezzanine) 31000 CFM, SP= 25 mm wg 986.22 1 Nos.
986.23 Departure Level 36500 CFM, SP= 25 mm wg 986.23 58 Nos.
986.24 Basement Zone - 06,07,08 & 09 40000 CFM, SP= 25 mm wg 986.24 8 Nos.
986.25 Basement Zone - 10 46000 CFM, SP= 25 mm wg 986.25 2 Nos.
986.26 Arrival concourse (Arrival Level) 50500 CFM, SP= 25 mm wg 986.26 14 Nos.
986.27 Basement Zone - 01,02,03,04 & 05 53000 CFM, SP= 25 mm wg 986.27 10 Nos.
987.00 SUPPLY AIR AXIAL FLOW FANS : 987
Supplying, installation, testing and commissioning of AMCA Certified (For Air and Sound Performance) ceiling hung / floor mounted supply air vane axial
flow fans of following capacity with GSS casing/ standard M.S. construction and aluminium alloy impellers with high efficiency aero-foil sections, blades,
the impeller directly driven by TEFC induction motor should be of high efficiency class IE3 (as per IS 12615) suitable for 3 Phase 50 Hz 415V ± 10 %, of
class 'F' insulation, fire rated flexible connection etc. including all accessories complete as required and as per specifications. Fan total efficiency should
not be less than 70 %, noise level should not be more than 75 db @ 3 m distance when measured in hemispherical reverberant room conditions. All the
fans shall be hot dip galvanized with minimum 220 GSM Zinc Coating and complete with bird screen at inlet. Suitable TP isolator within MS enclosure
should be provided. Gravity louvers will be provided at the discharge of the fan so as to avoid reverse flow. Static pressure shall be checked/verified by
contractor prior to order. Entire fan model & AMCA Seal shall appear in technical submittal of fan. Air moving capacity shall be as follows:
0 0
987.01 HT Room (Basement Mezzanine) 4000 CFM, SP= 20 mm wg 987.01 1 Nos.
987.02 Transformer Room (Basement Mezzanine) 8000 CFM, SP= 20 mm wg 987.02 1 Nos.
987.03 Corridor-1 (Apron Level) 13000 CFM, SP= 25 mm wg 987.03 1 Nos.
987.04 Corridor-1 & 2 (Arrival Level) 13000 CFM, SP= 25 mm wg 987.04 6 Nos.
987.05 Corridor-5 (Arrival Level) 18500 CFM, SP= 25 mm wg 987.05 2 Nos.
987.06 Corridor-3 & Gate Rooms (Arrival Level) 20000 CFM, SP= 25 mm wg 987.06 2 Nos.
987.07 STP Equalisation Tank 28500 CFM, SP= 25 mm wg 987.07 1 Nos.
987.08 Corridor-2 (Apron Level) 22000 CFM, SP= 25 mm wg 987.08 1 Nos.
987.09 Corridor-4 (Arrival Level) 24000 CFM, SP= 25 mm wg 987.09 2 Nos.
987.10 Immigration Area (Apron Level) 26500 CFM, SP= 25 mm wg 987.1 2 Nos.
987.11 LT Panel/ UPS/ Battery/ BMS/ Office (Basement Mezzanine) 31000 CFM, SP= 25 mm wg 987.11 1 Nos.
987.12 Arrival concourse (Apron Level) 35000 CFM, SP= 25 mm wg 987.12 4 Nos.
987.13 Departure Level 36500 CFM, SP= 25 mm wg 987.13 36 Nos.
987.14 Basement Zone - 06,07,08 & 09 40000 CFM, SP= 25 mm wg 987.14 8 Nos.
987.15 Basement Zone - 10 46000 CFM, SP= 25 mm wg 987.15 2 Nos.
987.16 Basement Zone - 01,02,03,04 & 05 53000 CFM, SP= 25 mm wg 987.16 10 Nos.
988.00 PRESSURISATION AXIAL FLOW FANS : 988
Supplying, installation, testing and commissioning of AMCA Certified (For Air and Sound Performance) ceiling hung / floor mounted supply air
vane/tube axial flow fans of following capacity with GSS casing/ standard M.S. construction and aluminium alloy impellers with high efficiency aero-
foil sections, blades, the impeller directly driven by TEFC induction motor should be of high efficiency class IE3 (as per IS 12615) suitable for 3 Phase 50
Hz 415V ± 10 %, of class 'F' insulation, fire rated flexible connection etc. including all accessories complete as required and as per specifications. Fan
total efficiency should not be less than 70 %, noise level should not be more than 85 db @ 3 m distance when measured in hemispherical reverberant
room conditions. All the fans shall be hot dip galvanized with minimum 220 GSM Zinc Coating and complete with bird screen at inlet. Suitable TP
isolator within MS enclosure should be provided. Gravity louvers will be provided at the discharge of the fan so as to avoid reverse flow. Static pressure
shall be checked/verified by contractor prior to order. Entire fan model & AMCA Seal shall appear in technical submittal of fan. Air moving capacity
shall be as follows:
0 0
988.01 Staircase 12 to 15 12000 CFM, SP= 15 mm wg 988.01 4 Nos.
988.02 Staircase 01 to 11 18000 CFM, SP= 20 mm wg 988.02 11 Nos.
988.03 Lift Lobby 01 to 11 18000 CFM, SP= 20 mm wg 988.03 11 Nos.
989.00 INLINE FANS : 989
Supplying, installing, testing & commissioning of INLINE FANS AMCA Certified (For Air and Sound Performance) suitable for installing in any position in
vertical or horizontal ducts. The casing shall be double skin, internally acoustically lined and constructed of galvanised steel. The inline fan shall be with
backward/forward curve centrifugal impeller fitted with maintenance free external rotor motor, flexible connections at the discharge & inlet. The motor
shall be suitable for 220±10% volt single phase 50 cycles AC supply. Quoted price shall be inclusive of electronic speed regulator and wiring between fan
& speed regulator for single phase fans. Incase of 3 phase fans quoted price shall be inclusive of DOL starter panel with cabling between starter panel and
fan. The incoming power supply to speed regulator / starter panel shall be provided by electrical contractor.
The fan shall have low sound level exceeding not more than 45 DBA at three meter distance.
0 0
989.01 100 CFM/5 mm SP 989.01 1 Nos.
989.02 200 CFM/5 mm SP 989.02 2 Nos.
989.03 400 CFM/10 mm SP 989.03 1 Nos.
989.04 1300 CFM/15 mm SP 989.04 1 Nos.
989.05 1500 CFM/15 mm SP 989.05 2 Nos.
990.00 FAN SECTION 990
Supply, installation, testing and commissioning of factory built double skin type floor mounted exhaust air units made of 25 mm thick panels consisting of
pre plasticized G.I. casing of thickness 0.6 mm outside layer and 0.6mm thick min. Plane GI inside layer with polyurethene foam (PUF) insulation of
density 40 ± 2 kg/m3 factory injected between them by injection moulding machine,complete with blower section with blower DIDW forward curved
centrifugal fan with vibration isolators and fire retardant canvass connection , squirrel cage induction motor belt driven package with TEFC drive motor
(IE-3 ), mounted within the housing and all other accessories as per specifications and as required. Fan section shall be of suitable Static pressure as
required. The fan motor shall be suitable for 415 ± 10% Volts, 50Hz, AC power supply.
0 0
990.01 2500 CFM/30 mm SP 990.01 2 Nos.
990.02 5000 CFM/30 mm SP 990.02 1 Nos.
991.00 PROPELLER FANS : 991
Supplying, installing, testing and commissioning of direct driven PROPELLER FANS for exhaust air as shown in drawings. Each fan shall be complete with
permanent split capacitor or shaded pole motor, mounting plate, accessories like wire guard, bird screen and fixed louvers for weather protection as
required. The Motor shall be suitable to run on 1 Phase /50 Hz /220 V electrical power.
0 0
991.01 450 mm dia 991.01 1 Nos.
991.02 300 mm dia 991.02 1 Nos.
992.00 CENTRAL AIR CLEANER SYSTEM 992
Supply installation, testing &commissioning of central air cleaner/Electronic Air cleaner a hybrid air purification system that improves the indoor air
quality through reducing harmful pollutants like particulate matter (PMx), PM 2.5, allergens, pollen, smoke, based on trap & kill technology. It should be a
Monobloc structured interconnectable units to form array of air cleaners specifically designed for integration in Return Air path, to centrally capture and
kill germs and to improve indoor air quality. It should be equivalent to H-13 efficiency/MERV 14 or better with low pressure drop of 0.25" wg @ 2.5 m/s.
The multistage filter should be enclosed inside powder coated steel casing/ Galvanized steel cabinet and should be self contained. It should have IMS
(Intelligent maintenance system) which can be monitored on BMS. The minimum life of central air cleaner unit should be more than 07 years without any
consumable parts. The units shall meet 2006/95/EC, 2013/35/EU, 2004/108/EC and 2014/30/EU or IEC 335-2-65:93 for Electrical safety and EMC
tests done and certified by an international agency. It should have RoHS or SGBC compliance for non-hazardous materials. The central air cleaner units
must have a valid ANSI/ASHRAE 52.2 test report to verify filtration efficiency. The system must not emit Ozone, and maximum exposure concentration of
ozone should not exceed 0.01 ppm.
0 0
992.01 Capacity 1708 CFM having minimum dimension 670mm X 610 mm 992.01 180 Nos.
992.02 Capacity 854 CFM having minimum dimension 610mm X 350 mm 992.02 50 Nos.
993.00 CHILLED / HOT / CD WATER PIPING: 993
Supplying, laying, fixing, testing and commissioning of following nominal sizes of chilled / Hot / CD water piping inside the building (with necessary
clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.)
0 0
Note:-The Pipes of sizes 150 mm & below shall be M.S. ‘C’ class as per IS: 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class
as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia
and above.
0 0
993.01 700 mm dia 993.01 231 M
993.02 600 mm dia 993.02 1004 M
993.03 500 mm dia 993.03 160 M
993.04 450 mm dia 993.04 246 M
993.05 400 mm dia 993.05 273 M
993.06 350 mm dia 993.06 336 M
993.07 300 mm dia 993.07 168 M
993.08 250 mm dia 993.08 1489 M
993.09 200 mm dia 993.09 777 M
993.10 150 mm dia 993.1 397 M
993.11 125 mm dia 993.11 1015 M
993.12 100 mm dia 993.12 1852 M
993.13 80 mm dia 993.13 2153 M
993.14 65 mm dia 993.14 1567 M
993.15 50 mm dia 993.15 2234 M
993.16 40mm dia 993.16 513 M
993.17 32 mm dia 993.17 823 M
993.18 25 mm dia 993.18 902 M
993.19 20 mm dia 993.19 344 M
994.00 INSULATED VALVES: 994
Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water piping duly insulated to the same specifications
as the connected piping and adequately supported as per specifications.
MANUAL BUTTERFLY VALVES:
Supplying, fixing, testing and commissioning of BUTTERFLY VALVE (MANUAL) with CI body SS Disc, Nitrile Rubber Seal & O-Ring, PN-16 pressure rating
for chilled water circulation as specified
0 0
994.01 600 mm dia 994.01 3 Nos.
994.02 300 mm dia 994.02 24 Nos.
994.03 250 mm dia 994.03 9 Nos.
994.04 200 mm dia 994.04 14 Nos.
994.05 150 mm dia 994.05 2 Nos.
994.06 125 mm dia 994.06 32 Nos.
994.07 100 mm dia 994.07 32 Nos.
994.08 80 mm dia 994.08 58 Nos.
994.09 65 mm dia 994.09 52 Nos.
994.10 50 mm dia 994.1 106 Nos.
995.00 INSULATED VALVES: 995
Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water piping duly insulated to the same specifications as
the connected piping and adequately supported as per specifications.
MOTORIZED BUTTERFLY VALVES:
Supplying, fixing, testing and commissioning of following sizes motorized butterfly valve with CI Body, SS Disc, O-ring and minimum PN-16 pressure rating,
conforming to BS 5155, IS 13095, with IP-55 actuator, capable of accepting upto 10V DC, & upto 20 mA electric signal and providing similar transduced
feedback output to control system as required. (Third party BMS compatible)
300 mm dia
4 Nos.
996.00 INSULATED VALVES: 996
Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water piping duly insulated to the same specifications
as the connected piping and adequately supported as per specifications.
BALANCING VALVE:
Supplying, fixing, testing and commissioning of BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM
coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled water circulation as specified.
0 0
996.01 300 mm dia 996.01 6 Nos.
996.02 250 mm dia 996.02 2 Nos.
996.03 200 mm dia 996.03 7 Nos.
996.04 150 mm dia 996.04 1 Nos.
996.05 125 mm dia 996.05 11 Nos.
996.06 100 mm dia 996.06 9 Nos.
996.07 80 mm dia 996.07 1 Nos.
996.08 65 mm dia 996.08 5 Nos.
996.09 50 mm dia 996.09 7 Nos.
997.00 INSULATED VALVES: 997
Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water piping duly insulated to the same specifications
as the connected piping and adequately supported as per specifications.
NON RETURN VALVE:
Supplying & fixing in position of NON - RETURN VALVE with duel plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating
for chilled water circulation including insulation as specified.
0 0
997.01 300 mm dia 997.01 8 Nos.
997.02 125 mm dia 997.02 4 Nos.
998.00 INSULATED VALVES: 998
Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water piping duly insulated to the same specifications
as the connected piping and adequately supported as per specifications.
Y - STRAINER:
Supplying & fixing in position of Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled water circulation including
insulation as specified.
0 0
998.01 300 mm dia 998.01 8 Nos.
998.02 125 mm dia 998.02 4 Nos.
998.03 100 mm dia 998.03 6 Nos.
998.04 80 mm dia 998.04 26 Nos.
998.05 65 mm dia 998.05 22 Nos.
998.06 50 mm dia 998.06 50 Nos.
999.00 INSULATED VALVES: 999
Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water piping duly insulated to the same specifications
as the connected piping and adequately supported as per specifications.
BALL VALVE WITH & WITHOUT STRAINER:
BALL VALVE set with & without strainer having bronze body, flanged end type, PN 16 pressure rating for chilled water circulation as specified.
confirming to technical specification including nut, bolts washer, gaskets etc.
0 0
999.01 40 mm dia 999.01 16 Set
999.02 32 mm dia 999.02 16 Set
999.03 25 mm dia 999.03 16 Set
999.04 20 mm dia 999.04 102 Set
1000.00 INSULATED VALVES: 1000
Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water piping duly insulated to the same specifications
as the connected piping and adequately supported as per specifications.
BALL VALVE:
BALL VALVE with bronze body , flanged end type, PN 16 pressure rating for chilled water circulation as specified. Confirming to technical specification
including nut, bolts washer, gaskets etc.
0 0
1000.01 40 mm dia 1000.01 20 Nos.
1000.02 32 mm dia 1000.02 52 Nos.
1000.03 25 mm dia 1000.03 20 Nos.
1001.00 PRESSURE GAUGES: 1001
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required
38 Nos.
1002.00 THERMOMETERS: 1002
Providing & fixing in position the mercury in glass industrial type thermometers.
14 Nos.
1003.00 Providing & fixing in position Binder test points at chilled water pipelines i.e. inlet & outlet of air handling units. 1003 242 Nos.
1004.00 Providing Digital thermometers with probe suitable for binder test point application. 1004 1 Nos.
1005.00 Providing Dial type pressure gauge with probe suitable for binder test point application. 1005 1 Nos.
1006.00 AUTO AIR VENTS: 1006
Supply, installation, testing and commissioning of Auto air vents valve 25mm dia confirming to technical specification including nut, bolts washer, gaskets
etc.
16 Nos.
1007.00 FLEXIBLE CONNECTIONS : 1007
Supplying, fixing, testing and commissioning of Flexible connector for following Dia. pipe having PN 16 working pressure with anti vacuum rings complete
with flanges, nuts, bolts, seal etc.to be installed at chillers, primary & secondary pumps suction and discharge.
0 0
1007.01 300 mm dia. 1007.01 24 Nos.
1007.02 125 mm dia. 1007.02 14 Nos.
1008.00 VALVES WITHOUT INSULATION: 1008
Supplying, fixing, testing & commissioning of following valves, gauges & strainers for condenser water circulation as per specifications.
MANUAL BUTTERFLY VALVES:
BUTTERFLY VALVE (MANUAL) with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified.
0 0
1008.01 700 mm dia 1008.01 3 Nos.
1008.02 350 mm dia 1008.02 12 Nos.
1008.03 200 mm dia 1008.03 4 Nos.
1008.04 100 mm dia 1008.04 1 Nos.
1008.05 50 mm dia 1008.05 8 Nos.
1009.00 VALVES WITHOUT INSULATION: 1009
Supplying, fixing, testing & commissioning of following valves, gauges & strainers for condenser water circulation as per specifications.
MOTORIZED BUTTERFLY VALVES:
Supplying, fixing, testing and commissioning of following sizes Motorized Butterfly Valve with CI Body, SS Disc, O - ring and minimum PN-16 pressure
rating, conforming to BS 5155, IS 13095, with IP-55 actuator, capable of accepting upto 10V DC, and upto 20 mA electric signal and providing similar
transduced feedback output to control system as required. (Third party BMS compatible)
0 0
1009.01 350 mm dia 1009.01 4 Nos.
1009.02 250 mm dia 1009.02 16 Nos.
1010.00 VALVES WITHOUT INSULATION: 1010
Supplying, fixing, testing & commissioning of following valves, gauges & strainers for condenser water circulation as per specifications.
BALANCING VALVE:
BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out
pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified.
0 0
1010.01 350 mm dia 1010.01 4 Nos.
1010.02 250 mm dia 1010.02 8 Nos.
1011.00 VALVES WITHOUT INSULATION: 1011
Supplying, fixing, testing & commissioning of following valves, gauges & strainers for condenser water circulation as per specifications.
NON - RETURN VALVE:
NON - RETURN VALVE with dual plate of CI body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified.
350 mm dia
4 Nos.
1012.00 VALVES WITHOUT INSULATION: 1012
Supplying, fixing, testing & commissioning of following valves, gauges & strainers for condenser water circulation as per specifications.
Y - STRAINER:
Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer circulation including insulation as specified.
350 mm dia
4 Nos.
1013.00 VALVES WITHOUT INSULATION: 1013
Supplying, fixing, testing & commissioning of following valves, gauges & strainers for condenser water circulation as per specifications.
BALL VALVE:
BALL VALVE with bronze body , flanged end type, PN 16 pressure rating for chilled water circulation as specified. Confirming to technical specification
including nut, bolts washer, gaskets etc.
0 0
1013.01 32 mm dia 1013.01 20 Nos.
1013.02 25 mm dia 1013.02 23 Nos.
1014.00 VALVES WITHOUT INSULATION: 1014
Supplying, fixing, testing & commissioning of following valves, gauges & strainers for condenser water circulation as per specifications.
POT STRAINER:
POT STRAINER (PN16) confirming to technical specification including nut, bolts washer, gaskets etc.:
700 mm dia
1 Nos.
1015.00 PRESSURE GAUGES: 1015
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required
16 Nos.
1016.00 THERMOMETERS: 1016
Providing & fixing in position the mercury in glass industrial type thermometers.
8 Nos.
1017.00 AUTO AIR VENTS: 1017
Supply, installation, testing and commissioning of Auto air vents valve 25mm dia confirming to technical specification including nut, bolts washer, gaskets
etc.
4 Nos.
1018.00 FLEXIBLE CONNECTIONS : 1018
Supplying, fixing, testing and commissioning of Flexible connections for following Dia. pipe having PN 16 working pressure with anti vacuum rings
complete with flanges, nuts, bolts, seal etc.to be installed at condenser water pumps suction and discharge .
350 mm dia.
16 Nos.
1019.00 GI DRAIN PIPES: 1019
Supplying, fixing, testing and commissioning of medium class GI condensate drain pipes on wall of following size duly insulated with upto 50 mm dia. 9
mm thick & above 50 mm dia. 19 mm thick closed cell nitrile rubber insulation in the form of pre-formed pipe sections and along with necessary clamps,
fittings such as bends, tees etc. adequately supported as per specifications and as required.
0 0
1019.01 40 mm dia 1019.01 110 M
1019.02 32 mm dia 1019.02 350 M
1019.03 25 mm dia 1019.03 170 M
1019.04 20 mm dia 1019.04 360 M
1020.00 UPVC DRAIN PIPES: 1020
Providing and fixing in position the following Rigid UPVC pipes for condensate drain with upto 50 mm dia. 9 mm thick & above 50 mm dia. 19 mm thick
closed cell nitrile rubber tubing secured with adhesive as per approved specification cut to required length, including the necessary fittings, supports as
per specifications.
0 0
1020.01 25 mm dia 1020.01 50 M
1020.02 20 mm dia 1020.02 330 M
1021.00 Dirt Separator 1021
Supply, installation, Testing and commissioning of Dirt separator In-line for removal of dirt particles within chilled water system. The acceptable design
shall incorporate a separating element to force water into tranquillity zones for dirt removal or a tube mesh construction made of copper wire and the
flow to be guided through an area with a greater cross-section than the connection dimensions in order to reduce the flow. Dirt particles shall be
removed via a valve on the base of the vessel whilst ferrous particles down to 4 µm shall be captured by a magnetic device. It It shall be able to remove 5-
10 µm dirt particles. The magnet shall be retractable to enable ferrous particles to be released and discharged through the drain valve. Dirt separator
shall be manufactured and designed in accordance with Pressure Equipment Directive PED 97/23/EC or 2014/68/EU. The cylindrical vessel shall be
manufactured from welded steel. Inlet and outlet of the unit shall be via horizontally-opposed, coaxial flanged connections in accordance withPN 16. It
shall be suitable for glycol solution upto 50%, Temperature range -10 C to 110 C The maximum permissible flow velocity shall be 3 m/s. The Dirt
Separator shall be sized appropriate to the maximum operating pressure and flow velocity of the system. Given System Flow 8000 USGPM. Inlet and
outlet of the unit (Dia-600 mm).
1 Nos.
1022.00 Dirt Separator 1022
Supply, installation,Testing and commissioning of Dirt separator In-line for removal of dirt particles within hot water system. The acceptable design shall
incorporate a separating element to force water into tranquillity zones for dirt removal or a tube mesh construction made of copper wire and the flow to
be guided through an area with a greater cross-section than the connection dimensions in order to reduce the flow. Dirt particles shall be removed via a
valve on the base of the vessel whilst ferrous particles down to 4 µm shall be captured by a magnetic device. It It shall be able to remove 5-10 µm dirt
particles. The magnet shall be retractable to enable ferrous particles to be released and discharged through the drain valve. Dirt separator shall be
manufactured and designed in accordance with Pressure Equipment Directive PED 97/23/EC or 2014/68/EU. The cylindrical vessel shall be manufactured
from welded steel. Inlet and outlet of the unit shall be via horizontally-opposed, coaxial flanged connections in accordance withPN 16. It shall be suitable
for glycol solution upto 50%, Temperature range -10 C to 110 C The maximum permissible flow velocity shall be 3 m/s. The Dirt Separator shall be sized
appropriate to the maximum operating pressure and flow velocity of the system. Given System Flow 1520 USGPM. Inlet and outlet of the unit (Dia-250
mm).
1 Nos.
1023.00 Twin Pump Pressuriation Unit with Pressureless Expansion tank with built-in De-aerator & automatic water makeup: 1023 0 0
Supply, installation, testing & commissioning of pressurization system comprising pressureless expansion tank, twin pump pessurization unit, controls,
pipings & fittings and controller, skid mounted system For Chilled Water Circuit.
System pressure shall be regulated within ± 0.2 bar (2.9 psi) of the set pressure. Expansion pressurization and deaeration of the system to be provided by
an integrated pump with pressureless expansion tank(s)
for Approximate system volume = 310,000ltr
at Max ambient temp. 43 Deg C
and total Static Height 22 meters.
The whole system duly tested from factory conforming to international standards PED-97/23/EC.
The system shall consist of minimum following components & features:
a) Twin pump Pressurization Unit(orientation verticle/horizontal), Solenoid Valve, Flow regulator valve, Safety relief valve, Pressure sensor, Pipe fittings
c/w Controller & display.
b)Pressureless Expansion Tank c/w high quality butyl rubber bladder, weight sensor, capable of removing dissolved gases and air bubbles.
c) Flexible Connection: to connect Pressureless Expansion Tank(s) with Pressurisation unit.
d) Backflow Preventer c/w strainer and shut-off valve.
e) Controller with IP 54 rating, display unit showing system content, system pressure and status of the main operating components in realtime. top up
function, flood limitor/shut down function in event of serious leak.
In case of any fault controller shall display the fault code and generate the alarm.
f) Unit shall be able to automatically fill in the required makeup water into the tank when the volume goes below the set limit
0 0
Note: The contractor shall submit calculations for total system volume and tank sizing calculations. 1 Set
0 0 0
1024.00 Twin Pump Pressuriation Unit with Pressureless Expansion tank with built-in De-aerator & automatic water makeup: 1024 0 0
Supply, installation, testing & commissioning of pressurization system comprising pressureless expansion tank, twin pump pessurization unit, pipings &
fittings and controller, skid mounted system For Hot Water Circuit.
System pressure shall be regulated within ± 0.2 bar (2.9 psi) of the set pressure. Expansion pressurization and deaeration of the system to be provided by
an integrated pump with pressureless expansion tank(s)
for Approximate system volume = 44,000ltr
at Max ambient temp. 50 Deg C
and total Static Height 22 meters.
The whole system duly tested from factory conforming to international standards PED-97/23/EC.
The system shall consist of minimum following components & features:
a) Twin pump Pressurization Unit (orientation verticle/horizontal), Solenoid Valve, Flow regulator valve, Safety relief valve, Pressure sensor, Pipe fittings
c/w Controller & display.
b)Pressureless Expansion Tank c/w high quality butyl rubber bladder, weight sensor, capable of removing dissolved gases and air bubbles
c) Flexible Connection: to connect Pressureless Expansion Tank(s) with Pressurisation unit.
d) Backflow Preventer c/w strainer and shut-off valve.
e) Controller with IP 54 rating, display unit showing system content, system pressure and status of the main operating components in realtime. top up
function, flood limitor/shut down function in event of serious leak.
In case of any fault controller shall display the fault code and generate the alarm.
f) Unit shall be able to automatically fill in the required makeup water into the tank when the volume goes below the set limit
0 0
Note: The contractor shall submit calculations for total system volume and tank sizing calculations. 1 Set
1025.00 BTU meter 1025
Providing, fixing, testing and commissioning of ultrasonic type BTU meter as per following sizes to measure the flow in CHW/ HW pipe lines. The BTU
meter shall be provided with display, thermowell brass, stem, thermometer sensor for water, bulb type, power supply input-230vac,50Hz, Output-24V
AC, necessary fittings & electronic digital read out.
0 0
1025.01 65 mm dia pipe size 1025.01 2 Nos.
1025.02 50 mm dia pipe size 1025.02 4 Nos.
1025.03 40 mm dia pipe size 1025.03 10 Nos.
1025.04 32 mm dia pipe size 1025.04 26 Nos.
1025.05 25 mm dia pipe size 1025.05 10 Nos.
1026.00 DUCTING FOR AIR CONDITIONING / VENTILATION: - FACTORY FABRICATED DUCTING: 1026
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber
gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per SMACNA standard and as per approved drawings and specifications of following
sheet thickness complete as required.
0 0
1026.01 Thickness 0.63 mm sheet (TDF) 1026.01 26560 Sqm
1026.02 Thickness 0.80 mm sheet (TDF) 1026.02 11080 Sqm
1026.03 Thickness 1.00 mm sheet (TDF) 1026.03 13210 Sqm
1026.04 Thickness 1.25 mm sheet (TDF) 1026.04 25940 Sqm
1027.00 DUCTING FOR AIR CONDITIONING / VENTILATION: - SITE FABRICATED DUCTING: 1027
Supply, installation, balancing and commissioning of site fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets,
elbows, splitter dampers, vanes, hangers, supports etc. as per BIS standard and as per approved drawings and specifications of following sheet thickness
complete as required.
0 0
1027.01 Thickness 0.63 mm sheet (TDF) 1027.01 4690 Sqm
1027.02 Thickness 0.80 mm sheet (TDF) 1027.02 1950 Sqm
1027.03 Thickness 1.00 mm sheet (TDF) 1027.03 2330 Sqm
1027.04 Thickness 1.25 mm sheet (TDF) 1027.04 4580 Sqm
1028.00 VOLUME CONTROL DAMPERS: 1028
Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages,
flanges etc. as per specifications.
185 Sqm
1029.00 Supply & fixing of powder coated extruded aluminium black anodized extruded aluminium volume control Collar Dampers with nut, bolts, screws etc. as 1029
per approved drawings and specifications.
106 Sqm
1030.00 Supply & fixing of powder coated extruded aluminium continuous type linear grilles complete with nut, bolts, screws etc. as per approved drawings and 1030
specifications.
481 Sqm
1031.00 GRILLES & DIFFUSERS: 1031
Supplying, fixing, testing and balancing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per
specifications.
151 Sqm
1032.00 GRILLES & DIFFUSERS: 1032
Supplying, fixing, testing and balancing of powder coated extruded aluminium Return/exhaust Air Grills with louvers but without volume control dampers
complete as required.
320 Sqm
1033.00 GRILLES & DIFFUSERS: 1033
Supplying, fixing, testing and balancing of Supply Air Diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge
ring & removable core.
267 Sqm
1034.00 GRILLES & DIFFUSERS: 1034
Supplying, fixing, testing and balancing of Return Air Diffusers of powder coated aluminium without volume control dampers with anti smudge ring &
removable core.
266 Sqm
1035.00 Supply installation testing and balancing of Supply Air Multi-Slot Diffusers (of approved shade), all diffusers must be multisloted complete with air pattern 1035
controller and shall be equipped with fixed air distribution grid, removable key operated hit and miss volume control damper and anti smudge ring where
required as per the shop drawing and specifications.
0 0
1035.01 4 Slot diffusers with 20 mm slot width 1035.01 1270 M
1035.02 3 Slot diffusers with 20 mm slot width 1035.02 1 M
1036.00 Supplying, fixing , testing and balancing of powder coated aluminium construction double skin eye ball type jet nozzles with double flap butterfly 1036
damper, mounted on steel face plate suitable for side wall installation of required dia & as per specification.
0 0
1036.01 310 mm Dia 1036.01 1 Nos.
1036.02 400 mm Dia 1036.02 337 Nos.
1037.00 Supplying, fixing, testing and balancing of drum louvers with Opposed balde damper of required size & as per specification to be designed for supply of 1037
high air volumes for the airport application. The drum louver should made out of extruded aluminium with 50mm thick border. The drum louver should
be adjusted in vertical plane & rotate in 30 Deg upwards or downwards movement with internal guide vanes fitted to drum louver should be adjusted in
lateral direction.
0 0
1037.01 1000 CFM 1037.01 9 Nos.
1037.02 1650 CFM 1037.02 74 Nos.
1037.03 2200 CFM 1037.03 96 Nos.
1038.00 Supplying, fixing , testing and balancing of displacement diffuser with 50-60% perforation (cover, mounting base, spigots and side plates) with lip seal of 1038
neoprene rubber & as per specification and drawing.The unit should be with an inserted perforated sheet steel basket to ensure even air distribution.
Unit should provide low-turbulence air supply with very low jet velocities. Casing, perforated face plate & perforated sheet steel basket should be made
of 18G galvanised sheet steel.
0 0
1038.01 700 CFM 1038.01 30 Nos.
1038.02 1000 CFM 1038.02 16 Nos.
1039.00 FIRE & SMOKE DAMPERS: 1039
Supplying, fixing, testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes
i/c control wiring, the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the
same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed
in the event of fire signal complete as required and as per specifications.
0 0
1039.01 Fire damper 1039.01 190 Sqm
1039.02 Actuator 1039.02 288 Nos.
1040.00 LOUVERS: 1040
Supply & fixing of powder coated extruded aluminium Fresh/ Exhaust air louvers comprising of inclined blade & extended out blade for disposal of rain
water, bird screen suitable for outdoor application as required.
552 Sqm
1041.00 Demand Control Ventilation System 1041 0 0
1041.01 Supply ,installation, testing & commissioning of duct mount / non duct type VAQ station made out of heavy gauge extruded aluminium of 1.5 mm 1041.01
nominal thickness consisting of low leakage extruded aluminium volume control damper; Rapid Average Pitot tube; Air Flow Straightener (Honey-Comb
patterned).
12 Sqm
1041.02 Supply, installation, testing & commissioning of motorized assembly for dampers with programmable single space DCV controller complete with CO2 1041.02
sensor as per specification; shall be able to control VFD, supply air damper; shall communicate on EIA-485 through Modbus; differential pressure sensor;
& step down transformer of 24V & control cabling as required.
49 Nos.
1041.03 Supply, installation, testing & commissioning of Electronic Differential Pressure sensor & Transmitters ( in ducted application) suitable for installation 1041.03
within duct & 250 pa pressure range with necessary control wiring suitable for transmitting signal to VFD as required.
2 Set
1041.04 Supply , installation, testing & commissioning of non-dispersive infrared type Co2 sensor for TFA fans as required suitable for indoor application having 1041.04
range of 0-2000 ppm with accuracy of + 30 ppm. The sensor shall be suitable for 24Vac or dc supply. The range of the sensor shall be approx. 100 sq. mtr.
6 Set
1042.00 DOOR GRILLES: 1042
Supply, installation and testing of powder coated (of approved shade) extruded aluminium air transfer door grilles with rear side frame as per approved
shop drawings and specification.
6 Sqm
1043.00 Supply, Installation and testing of factory fabricated MS sheet metal rectangular/circular ducts, accordance with the approved drawings and 1043
specifications. The ducts shall be provided with fire duct wrap/ Fire paint or cladding with wire wrapping to provide at least one hour fire rating ( Itemized
separately). Kitchen duct shall be of MS steel with welded construction. Duct shall be provided with clean outs at base of vertical riser, horizontal straight
duct etc.
Thickness 1.25 mm sheet
200 Sqm
1044.00 Supply, installation and testing of fire wrapping complete in all respects, on kitchen exhaust ducts, smoke extraction ducts with Fire duct wrap / Fire paint 1044
(coating) / Fire Board to provide 2 Hr fire rating.
4380 Sqm
1045.00 MOTORIZED DAMPERS: 1045
Supplying, fixing, testing and commissioning of motorized dampers in supply air duct/main branch and return air path as and where required of required
sizes i/c control wiring, the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open
the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be
closed in the event of fire signal complete as required and as per specifications.
0 0
1045.01 Motorized damper 1045.01 227 Sqm
1045.02 Actuator 1045.02 36 Nos.
1046.00 LOUVERS: 1046
Supply & fixing of powder coated extruded aluminium Fresh/ Exhaust air louvers comprising of inclined blade suitable for indoor application as
required.
127 Sqm
1047.00 Supply & fixing of powder coated extruded aluminium opposed blade back draft dampers of minimum 18 G frame and 20 G blade provided with suitable 1047
links to prevent the back pressure of air as required.
33 Sqm
1048.00 VARIABLE AIR VOLUME (VAV) BOXES : 1048
Supply, installation, testing and commissioning of VARIABLE AIR VOLUME (VAV) BOXES with acoustic lining (manufacturer recommended) pressure
independent and communicative type complete with damper, differential pressure sensor, motorized damper, actuator, controller capable of accepting
analogue signal (0-10 volt or 4-20 mA) from DDC controller (BMS compatible Actuator cum controller). VAV boxes shall be suitable for following air flow
capacities.
Note : Quoted price shall include the following:
i) - Motorized Aluminium construction damper with actuator.
ii) - 24 Volt power supply unit for each VAV box.
iii) - 220 volts power supply cord with 6 amp. Plug top up to the power socket .
iv) - Creating a 6 amp. Power supply from AHU panel up to the VAV box.
v) - Following points required from VAV controller to BMS :
Damper position, flow, temperature or CO2 value.
0 0
1048.01 1600 - 2000 CFM 1048.01 2 Nos.
1048.02 2100 - 3000 CFM 1048.02 1 Nos.
1048.03 3100 - 4000 CFM 1048.03 1 Nos.
1049.00 Supply, installation, testing and commissioning of INTEGRATOR for VAV boxes, capable of giving industry standard (Modbus / Lon Works / Bacnet) output 1049
to BMS system. Mapping shall be required for monitoring individual room temperature, air flow and damper position for areas conditioned through VAV
boxes. It shall be inclusive of wiring in MS conduit between integrator and individual VAV Boxes.
Integrator as described above.
1 Set
1050.00 THERMAL INSULATION 1050
Supplying, installing and testing of external thermal insulation on Chilled / Hot water pipes and fittings like valves, flanges and unions, etc. with Closed
Cell Class O Nitrile Rubber Elastomeric Insulation of Density 40 - 60 Kg/m3, Thermal Conductivity of 0.038 W/mk at 300 Cel. Mean Temp. and Mu≥7000
(without any additional vapour barrier) using manufacturer's recommended Rubber based Adhesive and finally applying Class 0 (BS 476) having a
Flammability Index ≤ 5 (AS1530.2) Cladding of 350μm in thickness with a total weight ≥500 g/m2 made from a 3-layer composite film of metallic
appearance with aluminium intermediate layer tested for UV protection as per EN ISO 4892-2 Method A and having a permanent curl to be applied with
30-50mm overlap using plastic rivets and manufacturer's recommended 50mm PSA Tapes complete as per Specifications. All bends, T-sections and end
caps shall be cladded with thermoformed fittings of the same composite covering system as per approved shop drawings and specifications. Pipe
supports to be used at each 1 m length shall be Insulated pipe support with self-adhesive closure, PUR/PIR load bearing Inserts, embedded in Elastomeric
Nitrile Rubber insulation with two outer metal shells made of aluminum sheet.
0 0
1050.01 600 mm dia -32 mm thick Insulation 1050.01 854 M
1050.02 500 mm dia -32 mm thick Insulation 1050.02 160 M
1050.03 450 mm dia -32 mm thick Insulation 1050.03 246 M
1050.04 400 mm dia -32 mm thick Insulation 1050.04 273 M
1050.05 350 mm dia -32 mm thick Insulation 1050.05 11 M
1050.06 300 mm dia -32 mm thick Insulation 1050.06 13 M
1050.07 250 mm dia -32 mm thick Insulation 1050.07 1403 M
1050.08 200 mm dia -32 mm thick Insulation 1050.08 767 M
1050.09 150 mm dia -32 mm thick Insulation 1050.09 397 M
1050.10 125 mm dia -32 mm thick Insulation 1050.1 915 M
1050.11 100 mm dia -32 mm thick Insulation 1050.11 1716 M
1050.12 80 mm dia -25 mm thick Insulation 1050.12 2150 M
1050.13 65 mm dia -25 mm thick Insulation 1050.13 1565 M
1050.14 50 mm dia -25 mm thick Insulation 1050.14 2203 M
1050.15 40mm dia -25 mm thick Insulation 1050.15 511 M
1050.16 32 mm dia -25 mm thick Insulation 1050.16 813 M
1050.17 25 mm dia - 25 mm thick Insulation 1050.17 902 M
1050.18 20 mm dia - 25 mm thick Insulation 1050.18 344 M
1051.00 Supplying, installing and testing of external thermal insulation on Chilled / Hot water pipes and fittings like valves, flanges and unions, etc. with Closed 1051
Cell Class 'O' Nitrile Rubber Elastomeric Insulation of Density 40 - 60 Kg/m3, Thermal Conductivity of 0.038 W/mk at 300 Cel. Mean Temp. and Mu≥7000
(without any additional vapour barrier) using manufacturer's recommended Rubber based Adhesive and finally applying Class 0 (BS 476) having a
Flammability Index ≤ 5 (AS1530.2) Cladding of 350μm in thickness with a total weight ≥500 g/m2 made from a 3-layer composite film of metallic
appearance with aluminium intermediate layer tested for UV protection as per EN ISO 4892-2 Method A and having a permanent curl to be applied with
30-50mm overlap using plastic rivets and manufacturer's recommended 50mm PSA Tapes complete as per Specifications. All bends, T-sections and end
caps shall be cladded with thermoformed fittings of the same composite covering system as per approved shop drawings and specifications. Pipe
supports to be used at each 1 m length shall be Insulated pipe support with self-adhesive closure, PUR/PIR load bearing Inserts, embedded in Elastomeric
Nitrile Rubber insulation with two outer metal shells made of aluminum sheet. (Location - HVAC Plant Room)
0 0
1051.01 600 mm dia -50 mm thick Insulation (25mm Thick + 25mm Thick) 1051.01 150 M
1051.02 300 mm dia -50 mm thick Insulation (25mm Thick + 25mm Thick) 1051.02 155 M
1051.03 250 mm dia -50 mm thick Insulation (25mm Thick + 25mm Thick) 1051.03 65 M
1051.04 125 mm dia -44 mm thick Insulation (25mm Thick + 19mm Thick) 1051.04 100 M
1052.00 DUCT INSULATION: 1052
Supply and installation of Thermal insulation material for Non - Exposed Ducts with Closed Cell Class O Nitrile Rubber Elastomeric Insulation of Density
40 - 60 Kg/m3, Thermal Conductivity of 0.038 W/mk at 300Celcius Mean Temp. and µ≥7000 (without any additional vapour barrier) and with factory
laminated aluminium foil of minimum 60 Microns thickness having weight of 193 gsm as per EN ISO 2286-2, tensile strength shall be 90N/15mm as per
EN ISO 527-3 with elongation > 10% as per EN ISO 527-3; to be applied on Ducts using manufacturer's recommended Rubber based Adhesive, as per the
approved specifications. The ducts are to be supported with duct supports made from PET foam as load taking member embedded in nitrile rubber foam
sheet with outer metal face made of aluminium.
0 0
1052.01 Supply air ducts in return air path-13 mm 1052.01 27460 Sqm
1052.02 Supply air ducts with ducted return-19 mm 1052.02 2770 Sqm
1053.00 ACOUSTIC LINING: - DUCT / PLENUM ACOUSTIC LINING: 1053
Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25
mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminium sheet
fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications.
1860 Sqm
1054.00 AHU ROOMS & PLANT ROOM ACOUSTIC LINING: 1054
Supplying, fixing acoustic lining on wall and ceiling of AHU rooms with 50 mm thick, density 32 kg/cu.m resin bonded glass fiber insulation friction fixed in
610 mm x 610 mm frame work made of 25X50X50X50X25 mm made out of 0.6mm thick GI sheet U shaped channel and covered with reinforced fiber
glass tissue and finished with 0.80 mm perforated aluminium sheet etc. complete as required and as per specifications.
10570 Sqm
1055.00 ELECTRICAL WORK:-CONTROL PANEL IN AHU ROOM (OPERATED THROUGH VFD) 1055
Design, manufacture, supply, installation, testing and commissioning of the following cubicle type, dead front, sheet steel, wall mounted control
panels including anchoring into the wall, wiring and earthing terminating into MCCB in each panel shall be provided by the electrical contractor.
All internal wiring and copper earthing of air handling unit motors from the VFD & Panel shall be included.
All outgoing shall be provided with Stop / Manual /Auto selector switch to facilitate operation through BAS. All starters shall be provided with
potential free Contact for Connections to Building Automation System.
The panel shall include the following components and accessories.
a. MCCB as per the ratings given below, suitable for motor duty and able to withstand fault level of 20 KA.
b. Terminal block for power distribution.
c. Phase indicating lights and indicating light for ON status.
d. Digital voltmeter and digital ammeter with selector switches.
e. Time delay relay for delayed automatic restart of air handling unit motor.
f. Wiring for microswitch for stopping the fan when fire damper closes.
g. For on/off/remote and local operation, 3 pole single throw switch shall be provided in each AHU panel to facilitate override of the automatic
operation.
h. All starters shall be provided with suitable potential free contract for connections to the Building Automation System.
The number of AHU control panels shall be as follows.
0 0
1055.01 80 amps MCCB, 40 HP VFD 1055.01 1 Nos.
1055.02 63 amps MCCB, 30 HP VFD 1055.02 6 Nos.
1055.03 63 amps MCCB, 25 HP VFD 1055.03 10 Nos.
1055.04 40 amps MCCB, 20 HP VFD 1055.04 13 Nos.
1055.05 40 amps MCCB, 15 HP VFD 1055.05 18 Nos.
1055.06 30 amps MCCB, 10 HP VFD 1055.06 4 Nos.
1055.07 30 amps MCCB, 4-7.5 HP VFD 1055.07 14 Nos.
1056.00 CONTROL PANEL IN AHU ROOM (WITH DOL / SD STARTER) 1056
Design, manufacture, supply, installation, testing and commissioning of the following cubicle type, dead front, sheet steel, wall mounted control panels
including anchoring into the wall, wiring and earthing terminating into MCCB in each panel shall be provided by the electrical contractor.
All internal wiring and copper earthing of air handling unit motors from the panel shall be included.
All outgoing shall be provided with Stop / Manual /Auto selector switch to facilitate operation through BAS. All starters shall be provided with potential
free Contact for Connections to Building Automation System.
The panel shall include the following components and accessories.
a. MCCB as per the ratings given below, suitable for motor duty and able to withstand fault level of 20 KA.
b. DOL / SD starter as per HP ratings
c. Terminal block for power distribution.
d. Contractor, over load relay with built in single phasing protection.
e. Phase indicating lights and indicating light for ON status.
f. Digital voltmeter and digital ammeter with selector switches.
g. Time delay relay for delayed automatic restart of air handling unit motor.
h. Wiring for microswitch for stopping the fan when fire damper closes.
i. For on/off/remote and local operation, 3 pole single throw switch shall be provided in each AHU panel to facilitate override of the automatic operation.
j. All starters shall be provided with suitable potential free contract for connections to the Building Automation System.
The number of AHU control panels shall be as follows.
0 0
1056.01 40 amps MCCB, 20 HP Star Delta Starter 1056.01 2 Nos.
1056.02 40 amps MCCB, 15 HP Star Delta Starter 1056.02 1 Nos.
1056.03 32 amps MCCB, 7.5 HP - 2 HP DOL starter 1056.03 20 Nos.
1057.00 CONTROL PANELS FOR FANS ( WITHOUT VFD) 1057
Design, manufacture, supply, installation, testing and commissioning of the following cubicle type, dead front, sheet steel, wall mounted control panels,
including anchoring into the wall, wiring terminating into MCCB and copper earthing, in each panel shall be provided by the electrical contractor.
All outgoing shall be provided with Stop /Manual /Auto selector switch to facilitate operation through BAS. All starters shall be provided with potential
free Contact for Connections to Building Automation System.
All wiring and copper earthing of motors from the panel shall be included.
The panel shall include the following components & accessories.
a. MCCB as per the ratings given below, suitable for motor duty and able to withstand fault level of 20 KA.
b. DOL / SD starter as per HP gratings given.
c. Terminal block for power distribution as required.
d. Contractor, over load relay with built in single phasing protection.
e. Phase indicating lights and indicating light for `ON’ status.
f. 144 mm x 144 mm voltmeter and digital ammeter.
g. Time delay relay for delayed automatic restart of motor.
h. Wiring for microswitch for stopping the fan when fire damper closes (in case of Fan only).
i. For on/off/remote and local operation, 3 pole single throw switch shall be provided in each panel to facilitate override of the automatic operation.
j. All starters shall be provided with suitable potential free contract for connections to the Building Automation System.
The number of control panels shall be as follows.
0 0
1057.01 63 amps MCCB, 25-30 HP Star Delta Starters 1057.01 42 Nos.
1057.02 40 amps MCCB, 15-20 HP Star Delta Starters 1057.02 139 Nos.
1057.03 32 amps MCCB, 10/12.5 HP Star Delta Starters 1057.03 19 Nos.
1057.04 25 amps MCCB, upto 7.5 HP DOL Starters 1057.04 73 Nos.
TOTAL FOR HVAC WORKS CARRIED OVER TO SUMMARY 0 0
B PACKAGE: (B1) - BMS WORKS B 0 0
1058.00 Server for BMS software 1058
BMS Computer System: Supply, installation, testing and commissioning of I7 Processor or Equivalet Server PC, 4MB Cache with 8 GB RAM, & 1 TB
HDD, 10/100 Mbps Ethernet card, USB connection & internal modem, Microsoft(R) Windows(R) 8 or better or latest OS Professional Enterprise, Web
server software, DVD-ROM Drive (with RAM), 100/1000 Mbps NIC for Network connection and anti virus software with 22" colour graphics monitor as
per Tender Specifications. Accessories included Optical Mouse, Key Pad, Laserjet colour A4 printer with the above BMS System configuration.
1 Nos.
1059.00 BMS Computer System: Supply, installation, testing and commissioning of I7 Processor or Equivalet Server PC, 4MB Cache with 8 GB RAM, & 1 TB 1059
HDD, 10/100 Mbps Ethernet card, USB connection & internal modem, Microsoft(R) Windows(R) 8 or better or latest OS Professional Enterprise, Web
server software, DVD-ROM Drive (with RAM), 100/1000 Mbps NIC for Network connection and anti virus software with 22" colour graphics monitor as
per Tender Specifications. Accessories included Optical Mouse, Key Pad with the above BMS System configuration.
2 Nos.
1060.00 500 VA UPS with half an hour battery backup for Workstation 1060 1 Nos.
1061.00 BUILDING MANAGEMENT SYSTEM WEB-BASED SERVER SOFTWARE 1061
BMS System Software : Supply, installation, testing and commissioning of the unlimited multi user with simultaneous minimum 5 user Web Based
Graphical Software meeeting the requirements in the Given I/O Summary and technical specifications including configuration and facility to create /
provide the graphic mapping for all I/O Summary points , animate the Graphics, Navigation between pages, display of logs, changing the time zones,
popup alarms, configurable password protection for Building Mgmt System as per Specifications. Software shall be able to communicate with open
protocols like BACNet, Modbus devices simultaneously. Offered software shall have builtin feature for EMS, Alarming, reporting, scheduling & trending.
The software shall have unlimited software & Hard ware capacity. During operation & maintenance if any controllers required to replace than software
shall have feature to automatically download logics in new controller as of old one automatically once the old controllers ip is maped in new one.
1 Lot
1062.00 Features for Energy Management & Reporting Tool software capable of fetching the energy data from the BMS and store the data into separate 1062
application database (SQL server) for analysis.
This Software should have the following Key features:
1. SEGMENTATION OF ENERGY INFORMATION AT A GLANCE.
2. CUSTOMISABLE ENERGY DASH-BOARD.
3. ENERGY REPORT GENERATION AGAINST SELECTION OF TIME AND FREQUENCY.
4. WEB BASED TOOL. NO ADDITIONAL SOFTWARE REQUIRED.
5. EMAIL / SMS OPTION AVAILABLE
6. MULTIPLE DATABASE SOURCES / SITE CAN BE INTEGRATED.
1 LOT
1063.00 PROGRAMMABLE & APPLICATION SPECIFIC CONTROLLER (DDC) - UL LISTED 1063
Supply, installation, testing and commissioning of Bacnet IP/Lonmark IP852 (open Protocols) Direct Digital Controllers, The networkable controllers shall
be , UL and BTL Listed with 32 bit microprocessor, real time clock & programmable memory. The Controller shall have built-in two ethernet ports. The
networkable DDC's shall be capable of peer to peer communication with lockable MS mounting cabinets duly powder coated connector strip, internal
wiring and space to house controller & relays, connector etc. as per IO Summary. The Controller shall have built in memory to save graphics & logis for
the connected points. The controller shall have 15% spare IO capacity. Any Multiplexer (Mux) / AI to DI / DI to AI converters shall not be allowed. Max one
DDC for 2 AHU shall be used. Each DDC shall not have Total IOs (total Points) more than 50 nos.
0 0
1063.01 DCC controllers for AHU (Max 2 AHU per Controller) 1063.01 1 Lot
1063.02 DCC controllers for TFA, HRU Units System 1063.02 1 Lot
1063.03 DCC controllers for Ecological units & Air Washers 1063.03 1 Lot
1063.04 DCC controllers for Ventillation System & Smoke Evecuation 1063.04 1 Lot
1063.05 DCC controllers for DG system 1063.05 1 Lot
1063.06 DCC controllers for Fire Fighting System 1063.06 1 Lot
1063.07 DCC controllers for Plumbing / Domestic / Raw System (WTP & STP) 1063.07 1 Lot
1063.08 DCC controllers for Electrical System 1063.08 1 Lot
1063.09 DCC controllers for Elevetors & Airport System 1063.09 1 Lot
1064.00 Supply, installation, testing and commissioning of Layer 2 switch 1064
with 8/12/24 ports (RJ-45) as required to complete the system complete with supply. The switch shall have port, as required to complete system, to
communicate with other switches including Passive components inbuilt 2 SFP ports including SFP modules, rack mountable, SMPS power supply & other
termination accessories (Like Pigtails/LIUs/ Convertors/Splicing equipment ,Patch panel, Patch Cord, Etc) complete as per specifications and as required
for BMS DDC Panel Networking. Vendor to decide the quantity and size of network switches based on their network design.
1 Lot
1065.00 SYSTEM INTEGRATION UNITS FOR 3RD PARTY SYSTEM SOFTWARE INTEGRATION - UL listed Controllers 1065
Supply, installation, testing and commissioning of Bacnet IP/Lonmark IP852 (open Protocols) Integration units, to connect individual 3rd party
microprocessor system controllers like Chillers, DGs, VFDs, VAV terminal units, UPS, Multifunction Digital Electronic Meters, Fire Detection Systems, STP,
Elevators etc. the unit shall be capable of integarting all mentioned devices on BACnet, Modbus & LON etc.as per distribution given below :
For Comfort Chillers (50 points/chiller on open Protocol Output BACnet/Modbus) - 1 Set
AHU VFD Integration points mentioned in IO summary- 1 Set
TFA & Ventillation VFD Integration points mentioned in IO summary- 1 Set
For Addressable Fire Detection System Control Panel for 2500 Soft Points- 1 Set
For DG System points mentioned in IO summary- 1 Set
WTP system points mentioned in IO summary- 1 Set
LT Electrical Panel, UPS, Elevators & EM points mentioned in IO summary- 1 Set
STP & Hydropneumatic System points mentioned in IO summary- 1 Set
Precision AC System- 1 Set
Water Consumption Flow Metering- 1 Set
Demand Control Ventilation- 1 Set
1 Job
1066.00 SENSORS AND FIELD DEVICES 1066
Supplying, installing, testing and commissioning of the following sensors / transducers / transmitters
0 0
1066.01 Resistance type immersion temperature sensors for measuring Chilled water, condenser water supply and return temperature (Range 32-160 deg. F). The 1066.01
accuracy shall be at least ± 0.36 degrees F. The pressure rating shall be 10 kgf/sq cm .
294 Nos.
1066.02 Outside air temperature , humidity RH & Wetbulb sensors for measuring outside air temperature (Range 35-130 °F). The accuracy of temperature sensor 1066.02
shall be ± 0.36 degrees F and RH sensor is ± 3% . It should be provided with sun sheild and rain protection.
1 Nos.
1066.03 Water Bi - Level Switches for indicating level status in Cooling Tower, sumps & Tanks. 1066.03 28 Nos.
1066.04 Differential pressure switches across the blowers, Filters for indicating status. Pressure differential – 10 mm – 125 mm. The switch shall be with 1066.04
connecting tube and metal bends for connections to the duct. The housing shall be IP 54 rated.
448 Nos.
1066.05 Duct Temperature Sensor shall be with rigid stem and of averaging type. These shall be Platinum sensor suitable for duct installation and accuracy shall 1066.05
be ± 0.06%, for measuring supply -air temperature of AHUs etc.
98 Nos.
1066.06 Duct Temp & RH Sensor shall capable to measure relative humidity of 0 to 100%, suitable for duct installation and accuracy shall be ± 34°F at 70°F & 1066.06
Resistance Change approx 3ohms/°F, for Measuring return air Temprature & Humidity of AHUs etc.
68 Nos.
1066.07 Differential Pressure Switch across the Pumps for indicating the Pump status of Pumps complete with all accessories 1066.07 30 Nos.
1066.08 UL Listed Pressure sensor with IP 67 protection for measuring line pressure in Hydrant / Sprinkler lines 1066.08 4 Nos.
1066.09 UL Listed Current Relay 1066.09 12 Nos.
1066.10 Duct Static Pressure Sensor for AHU 1066.1 160 Nos.
1066.11 Air Velocity Sensors 1066.11 2 Nos.
1066.12 Flame Proof Sensors 1066.12 1 Nos.
1066.13 Flame Proof Switch 1066.13 6 Nos.
WIRING 0 0
1067.00 Supplying, laying, termination, testing and commissioning of signal shielded cables . (2 core 1 mm2), PVC insulated, tinned copper conductor cable 1067
Armoured cable.
78922 M
1068.00 Supplying, laying, termination, testing and commissioning of signal shielded cables. (4 core 1 mm2), PVC insulated, tinned copper conductor cable 1068
Armoured cable.
5000 M
1069.00 Supplying, laying, termination, testing and commissioning of communication cables. (2 core 1.5 mm2), PVC insulated, shielded, Twisted Pair, tinned 1069
copper conductor cable Armoured cable.
10000 M
1070.00 Flexible PVC Flexible conduit for termination in the DDC Pannels 1070 5500 M
SUB TOTAL FOR BMS WORKS - A 0 0
X Fire Fighting System X 0 0
1071.00 Providing, Fixing, Single Headed external yard hydrant 63 mm dia. SS-304 landing valve (ISI marked) conforming to IS-5290 (Type -A) with SS-304 blank 1071
cap & chain, cast iron wheel, complete as required and as specified.
25 Each
1072.00 Providing, Fixing, MS Hose cabinet outdoor type of size 0.750Mx 0.600Mx 0.250M made of 2mm thick MS sheet with 6mm thick glazed glass doors i/c 1072
necessary locking arrangement suitable to accomodate 2 nos 15m long hoses, one no branch pipe, etc. and mounted on wall or with raised brick
platform. The cabinet shall be painted with red colour externally & white internally complete in all respects for external hydrant and as specified.
25 Each
1073.00 Providing, Fixing, Single Headed internal hydrant comprising of 80 mm NB dia. flanged inlet pipe with reducer, 63mm dia. outlet SS-304 landing valves 1073
(ISI marked), conforming to IS-5290 (Type A) with SS-304 blank cap and chain, cast iron wheel complete as required & as specified.
164 Each
1074.00 Providing, Fixing, 63 mm dia SS-304 short Branch pipe with 15 / 20mm (nominal internal diameter) nozzle conforming to IS:903 suitable for 1074
instantaneous connection complete to inter-connect hose pipe, coupling etc. as required and as specified.
204 Each
1075.00 Providing, Fixing, 63mm dia., 15mtr. long RRL hose pipe (ISI Marked) with 63mm dia. male and female SS-304 couplings duly binded with GI wire, rivets 1075
etc. conforming to IS- 636 (Type-A) complete as required & as specified.
410 Each
1076.00 Providing, Fixing, First-Aid Hose Reel 20mm dia. x 36.5m long (minimum length) (Thermoplastic Type as per I.S. 12585) complete with swing type drum, 1076
bracket, 25mm dia. shut-off valve and 5mm SS -304 nozzle conforming to IS-:884, connection with riser with MS C- class pipe, painting the MS works
complete as required & as specified.
164 Each
1077.00 Providing, Fixing, of standard fireman's axe as per IS:926 with heavy duty insulated rubber handle. 1077 164 Each
1078.00 Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required 1078 170 Each
1079.00 Providing, Fixing, inlet breechning in CI Body having 4 way Gun-metal Fire Brigade inlet connection comprising of 4 nos. 63mm dia. male instantaneous 1079
inlet couplings with PVC cap and GI chain as required for 150mm dia. flanged MS pipe connection conforming to IS- 904 complete (to be connected to
static tank) as required and as specified.
2 Each
1080.00 Providing, Fixing, fire brigade suction hose coupling (Two way draw out connection) in CI Body, gun metal internal connection with nut for female 1080
coupling as per IS-904 complete with 150mm dia. Suction pipe and foot valve (to be connected to static tank) complete as required and as specified.
4 Each
1081.00 Providing, Fixing, orifice plate made of 6 mm. thick stainless steel with orifice of required size in between flange & landing valve of external and internal 1081
hydrant to reduce pressure to working pressure of 3.5 kg/cm2 complete as required & as specified.
0 0
1081.01 80mm dia. 1081.01 20 Each
1081.02 100mm dia. 1081.02 2 Each
1081.03 150mm dia. 1081.03 10 Each
1082.00 Providing, Fixing, 'C' Class heavy duty mild steel pipes conforming to IS-1239 including cutting, welding, fittings viz bends, tees, reducers, flanges, nut- 1082
bolts, gasket complete and laying in ground including excavation, providing PCC block support at specified interval and giving suitable corrosion
treatment by way of min. 4mm thick corrosion protection tape ( PYPKOAT or approved equivalent) which shall be wrapped comprising of coal tar/
asphalt component supported on fabric of organic/ inorganic fibre as per IS-10221, re-filling the trench etc.as required and as specified.
0 0
1082.01 150mm dia. 1082.01 1900 M
1082.02 100mm dia. 1082.02 20 M
1082.03 80mm dia. 1082.03 80 M
1083.00 Providing, Fixing, following sizes of 'C' Class heavy duty Mild Steel pipes conforming to IS-1239 upto 150mm dia. & IS-3589 for sizes greater than 150mm 1083
dia, including cutting, welding, nut-bolts, gasket, fitting viz. bends, tees, reducers, crosses, flanges etc. and fixing the pipes on wall / ceiling / beam / floor
with suitable MS clamps / structural supports/PCC block and painting two coats of red oxide primer and two coats of synthetic enamel paint of approved
shade complete as required and as specified. ( For all applications above ground level)
0 0
1083.01 300 mm dia. (6 mm thick) 1083.01 10 M
1083.02 250 mm dia. (6 mm thick) 1083.02 10 M
1083.03 200 mm dia. (6 mm thick) 1083.03 180 M
1083.04 150 mm dia. 1083.04 9200 M
1083.05 100 mm dia. 1083.05 4300 M
1083.06 80 mm dia. 1083.06 4400 M
1083.07 65 mm dia. 1083.07 5100 M
1083.08 50mm dia. 1083.08 6300 M
1083.09 40 mm dia. 1083.09 6800 M
1083.10 32 mm dia. 1083.1 3600 M
1083.11 25 mm dia. 1083.11 37000 M
1084.00 Providing & fixing Butterfly valve with C.I. body & disc, stainless steel/carbon steel shaft, Hand lever operated, PN 1.6 rating, conforming to 1084
IS:13095/BS:5155.
0 0
1084.01 250mm dia. 1084.01 1 Each
1084.02 200 mm dia. 1084.02 1 Each
1084.03 150mm dia. 1084.03 75 Each
1084.04 100 mm dia. 1084.04 2 Each
1084.05 80 mm dia. 1084.05 45 Each
1085.00 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 1085
0 0
1085.01 250mm dia 1085.01 6 Each
1085.02 200mm dia. 1085.02 7 Each
1085.03 150mm dia. 1085.03 18 Each
1085.04 100 mm dia. 1085.04 4 Each
1085.05 80 mm dia. 1085.05 4 Each
1086.00 Providing, Fixing, non return valve Rating PN 1.6 Dual Plate type, conforming to API-594 with C.I. body, SS Disc, SS stem, EPDM seal, complete with 1086
companion flanges, bolts, nuts, washers & inserted rubber gasket complete as required and as specified.
0 0
1086.01 250 mm nominal bore 1086.01 1 Each
1086.02 200 mm nominal bore 1086.02 1 Each
1086.03 150 mm nominal bore 1086.03 7 Each
1086.04 100 mm nominal bore 1086.04 1 Each
1086.05 80 mm nominal bore 1086.05 3 Each
1087.00 Providing, Fixing, lever operated brass/ bronze ball valve of full flow with SS Balls having minimum working pressure of 16 Kg / Cm2 approved quality 1087
(screwed end) :
0 0
1087.01 50mm nominal bore. 1087.01 60 Each
1087.02 40 mm nominal bore 1087.02 2 Each
1087.03 32 mm nominal bore 1087.03 2 Each
1087.04 25 mm nominal bore 1087.04 170 Each
1088.00 Providing, Fixing, 25mm dia. gunmetal air release valve PN 1.6 with all fittings and forged ball valve on header complete as required and as specified. 1088
3 Each
1089.00 Providing, Fixing, Y Type strainer, 200mm dia, of Ductile CI Body flanged ends with stainless steel strainer having 3 mm perforation , perforation area 1 1089
:4 Pressure rating PN 1.6. Complete as required.
4 Each
1090.00 Providing, Fixing, pressure switch, Standard Type, (for operation at 0-15 Kg./sqcm) with required fittings and accessories complete. 1090 8 Each
1091.00 Providing, Fixing, reinforced neoprene rubber vibration eliminators/expansion joints (to provide relief from stresses at pipe flanges) suitable for upto 16 1091
kg/cm2 pressure, as per specification of the manufacturers complete as required and as specified.
0 0
1091.01 250mm dia. 1091.01 1 Each
1091.02 200mm dia. 1091.02 1 Each
1091.03 150mm dia. 1091.03 6 Each
1091.04 100mm dia. 1091.04 2 Each
1091.05 80mm dia. 1091.05 3 Each
1092.00 Air pressure vessel for Fire Pump 1092
Providing and fixing double flanged vertical air vessel fabricated from 10mm thick M.S. plate with dished ends fabricated from 10mm M.S. plate, outside
painted with one coat of primer and two coats of synthetic enamel paint of approved shade, complete with approved quality of pressure switches,
pressure gauges and all other required accessories to operate commonly main fire pump, sprinkler pump, Diesel Fire pumps and Jockey pumps at drop
of pressure automatically at required pressure setting complete as required and as specified.
Recommended dia. : 450mm
Height of shell : 2000mm
Working pressure :16 Kg/Sq.cm
Test Pressure : 25 Kg/Sq.cm
3 Each
1093.00 Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface 1093
box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and MS top cover in 50 x 50 mm MS angle frame , lifting
handle , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside
plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
10 Each
1094.00 Providing, Fixing, installation control valve (Sprinkler Alarm Valve) of Cast iron body and bronze working parts comprising of water motor alarm, bronze 1094
seat clapper and clapper arm, hydraulically driven mechanical gong bell to sound continuous alarm when the Wet riser/Sprinkler system activates,
pressure gauges, emergency releases ,strainer, pressure switch, cock valve complete with drain valve and bypass, test control box,ball valves, MS pipe of
required size, flanges, orifice plate, fittings, gasket etc.suitable for 150 mm diameter pipe size complete as required as specified.
12 Set
1095.00 Providing, Fixing, 25mm dia inspection and testing assembly with Gun Metal isolation valve, Gun Metal sight glass by-pass valve and connected to line 1095
drain with necessary union & fitting complete as per NBC provisions and as specified.
52 Each
1096.00 Providing and fixing UL Listed electrically operated water flow switches with threaded connection for indicating water flow in sprinkler branch line 1096
suitable for vertical/horizontal mounting as per site requirement complete as required and as specifed for pipe sizes of 80 to 150 mm Dia.
52 Each
1097.00 Providing, Fixing,15 mm dia. GM sprinkler head with standard response Quartzoid Bulb capable to operate at 68 degree C complete with all accessories 1097
as required and as specified. (UL Listed)
0 0.00
1097.01 Pendant type in chrome finish (Standard Coverage) 1097.01 8700 Each
1097.02 Upright type in chrome finish (Standard Coverage) 1097.02 8900 Each
1097.03 Side Wall type in chrome finish (Standard Coverage) 1097.03 200 Each
1097.04 Concealed Sprinkler (Standard Coverage) 1097.04 10 Each
1098.00 Providing & Fixing chrome finished Rosette plate with twin - piece recessed escutcheon plate, UL Listed / FM Approved, suitable for 15 mm size sprinklers. 1098
8700 Each
1099.00 Providing, Fixing, flexible tubes in corrugated SS flex tube, for connecting pendant sprinklers to branch lines complete with all necessary accessories, 1099
reducers, O-rings, nipples etc., supporting structural arrangments in the false ceiling/slab as per site requirement for the below lengths and tested for
min 15 Kg/Sq.cm pressure with G.I. retainer rings & guide bolts complete as required and as specified. (UL/ EN Listed)
0 0
1099.01 For 700 mm length 1099.01 2700 Each
1099.02 For 1000 mm length 1099.02 5020 Each
1099.03 For 1500 mm length 1099.03 950 Each
1100.00 Providing, Fixing, Testing and Commissioning of 15 mm dia NB, Brass Water Curtain Nozzle, suitable for a maximum working pressure of 12.3 kg / cm2 1100
(175 PSI) with K Factor of 23, suitable for mounting in the horizontal position complete as per approved model & instructions of the Engineer-In-Charge.
195 Each
1101.00 Providing, Fixing, Testing and Commissioning of Deluge Valve with Electrical operated Trim Set with solenoid valve and switches, Gong valve, Drain valve, 1101
Test assembly, 150 mm dia isolation valve with bypass including actuation & control panel, control cable from deluge valve to solenoid switch 2 Core x
1.5 Sq. mm., UL Listed / FM Approved, complete with drain cock arrangement and with all accessories, welded or screwed as required including cutting
holes and chases in brick or RCC walls and making good complete as per approved model.
8 Each
1102.00 Providing and Fixing intelligent-type Sprinkler Annunciation Panel for minimum 100 Zones working & 20 spare, compatible for seamless integration with 1102
waterflow devices, monitor & control modules and BMS systems (programmable outputs), with LCD type display & LED indication for all zones, complete
with internal sounder, alarm/fault indications & standby 24V SMF lead acid batteries of suitable capcity with charger complete as required and as
specified.
1 Set
1103.00 Providing, Fixing, addressable monitor module with existing flow to monitor the water flow in sprinkler system, operating on looped power and install as 1103
per site requirement complete as required and as specified.
52 Each
1104.00 Providing, Fixing,electrical Fault-isolation Modules to protect the system against wire to wire short circuits on loops, to be installed at the rate of every 5 1104
nos. monitor modules complete as per manufacturer specifications and in an accessible location as per site, excluding wiring to Annunciation Panel, with
UL/EN approval.
20 Each
1105.00 Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required 1105 170 Each
1106.00 Providing, Fixing, ISI marked portable type fire extinguishers of following type complete as per specification and fixed / install as per site condition : 1106
0 0.00
1106.01 CO2 type 4.5 kg capacity as per IS- 15683 1106.01 175 Each
1106.02 22.5 kg capacity CO2 type cylindrical shape fire extinguisher (Trolley mounted) 1106.02 2 Each
1106.03 6 Kg capacity ABC Dry Powder type 1106.03 175 Each
1107.00 SITC of Mechanical Foam type (AFFF media) 50 Liters Capacity cylindrical shape fire extinguisher with gas cartridge, hose, trolley and all required 1107
accessories, complete as per IS-13386 - trolley mounted type for portable use.
2 Each
1108.00 Providing and Fixing 3 Nos. G.I. sand buckets painted "Red Color" complete with G.I. stand duly painted "Red Color" of suitable size to hang 3 Buckets at a 1108
time as per required specifications.
5 Each
1109.00 Providing and fixing internal fire hose cabinet fabricated from 14 gauge SS-304,2MM Thicnece sheet with single or double glazed front door and locking 1109
arrangement, vinyl tape 50% front side, “Fire Hose” with stove enameled paint, written on front, including necessary supports of approximate size
2100x900x715mm deep to house two lengths of canvas hose with couplings, branch pipe, fire hose reel, nozzle, fireman axe, single outlet landing valve
and first-aid hose reel, complete in all respects.
164 Each
1110.00 Providing, Fixing, electric driven main fire Hydrant / Sprinkler pumps suitable for automatic operation complete in all respect as required & specified and 1110
consisting of the following:
Horizontal type multistage, end suction , top discharge , centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft ,
mechanical seal, to ensure minimum pressure of 3.5 kg/cm2 at highest and farthest outlet at specified flow of 2850 LPM & 100 m head conforming to IS-
1520 complete with all accessories etc. as required
The pump shall be capable of furnishing not less than 150% of rated capacity at a head not less than 65% or rated head. The shut off head shall not
exceed 120% of rated head.
Suitable HP Squirrel cage Induction motor suitable for operation on 415V, 3 phase, 50Hz, AC supply suitable for the above pump rating , TEFC type
confirming to IS-325 with IP:55 protection for enclosure, horizontal foot mounted with class F insulation, flexible coupling & coupling guard with the
pump complete as reqd..
Common bed plate fabricated from MS channel / ISMB with spring type vibration isolators. The pump set base shall be held by bolts grouted in the
suitable RCC ( 1:2:4) foundation duly plastered including foundation bolts, washers complete as reqd.
2 Set
1111.00 Providing, Fixing, of Diesel engine driven standby fire pump suitable for automatic operation complete in all respect as required & specified and 1111
consisting of the following:
Horizontal type multistage, end suction , top discharge , centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft ,
mechanical seal, to ensure minimum pressure of 3.5 kg/cm2 at highest and farthest outlet at specified flow of 2850 LPM & 100 m head conforming to IS-
1520 complete with all accessories etc. as required
The pump shall be capable of furnishing not less than 150% of rated capacity at a head not less than 65% or rated head. The shut off head shall not
exceed 120% of rated head.
Heat Exchanger ( Water ) cooled diesel engine developing required BHP suitable for the pump, flexible coupling & coupling guard with the pump &
common bed plate for mounting of engine & pump shall confirming to relevant BS/IS standard with auto starting mechanism.
The common base frame shall be held by bolts grouted in the concrete including foundation bolts, washers as required, vibration damping arrangement
by cushy foot & engine panel with battery charger provided by engine manufacturer, connection to engine starting panel, lead acid batteries of 12V/24V,
180AH with casing, lugs, stand & terminations to diesel engine, charger complete in all respect.
Exhaust pipe of required length ( discharge to leave above roof level as per standard) with 50mm thick glass wool pipe section, covered with aluminum
cladding, residential silencer muffler, instruments & protection-stop solenoid for auto stop in the event of fault with auto indications, day oil tank of 200
ltrs. with first charge of diesel fabricated out of 4mm MS sheet with inlet/ outlet ON/OFF valves, level indicator, drain pipe, 15mm dia MS fuel line
complete as reqd.
Common bed plate of fabricated MS channel / ISMB with vibration isolator. The base frame shall be held by bolts grouted in the suitable cement concrete
foundation duly plastered including foundation bolts, washers as required.
2 Set
1112.00 Providing, Fixing, electric driven Pressurization Pump suitable for automatic operation complete as required & as specified and consisting of the 1112
following:
Horizontal type end suction, top discharge, centrifugal, Jockey pump of cast iron body and bronze impeller, with SS shaft, to ensure at highest and
farthest outlet confirming to IS-1520 complete with all accessories as required.
Suitable HP Squirrel cage induction motor suitable for 415 V, 3 phase,50Hz, AC supply for the above pump T.E.F.C. type confirming to IS - 325 with IP:55
protection for enclosure, horizontal foot mounted, class-F insulation, flexible coupling & coupling guard with the pump complete in all respects.
Common base frame shall be fabricated from MS channel / ISMB with vibration isolator. The base frame shall be held by bolts grouted in the suitable RCC
(1:2:4) foundation duly plastered including foundation bolts, washers complete as reqd.
0 0.00
1112.01 180 LPM 100 M Head 1112.01 2 Set
1112.02 180 LPM 35 M Head 1112.02 1 Set
1113.00 Providing, Fixing, of electric driven main fire Water curtain pumps suitable for automatic operation complete in all respect as required & specified and 1113
consisting of the following:
Horizontal type multistage, end suction, top discharge , centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, to
ensure minimum pressure of 3.5 kg/cm2 at highest and farthest outlet at specified flow of 1620 LPM & 35 m head conforming to IS- 1520 complete with
mechanical seals, safety relief valve, complete witth all accessories etc as required.
The pump shall be capable of furnishing not less than 150% of rated capacity at a head not less than 65% or rated head. The shut off head shall not
exceed 120% of rated head.
Suitable HP Squirrel cage Induction motor suitable for operation on 415V, 3 phase, 50Hz, AC supply for the above pump TEFC type confirming to IS-325
with IP:55 protection for enclosure, horizontal foot mounted with class F insulation, flexible coupling & coupling guard with the pump complete as reqd.
Common bed plate fabricated from MS channel / ISMB with spring type vibration isolators. The pump set base shall be held by bolts grouted in the
suitable RCC (1:2:4) foundation duly plastered including foundation bolts, washers complete as reqd.
1 Set
GAS FLOODING & FIRE SUPPRESSION SYSTEM 0 0
1114.00 NOVEC 1230 BASED FIRE SUPPRESSION SYSTEM COMPRISING OF PROVIDING ALL MATERIAL, EQUIPMENT, INSTALLATION, LABOUR, TESTING, 1114
COMMISSIONING & HANDING OVER OF THE ENTIRE SYSTEM, WITH THE FOLLOWING COMPONENTS:
Providing & fixing Seamless Steel Cylinder Complete with Pneumatical Valve Assembly arrangement, supervisory switch connection for minitoring
cylinder pressure, in compliance with Chief Controller of Explosive, Nagpur with electric & pressure operated control heads as per requirement
(Master/Slave Actuation Packages) a safety burst disc, and any other accessories to make the cylinder completely operational including Flexible Actuation 0 0
Hose (directed to a pressure operated control head on each cylinder valve using actuation hose), container strap, structural supports etc.
1115.00 Providing NOVEC 1230, factory-filled in the Cylinder, as per the specifications and manufacturer recommendations/ specified design concentration and fill 1115
density. 0 0
1115.01 SERVICE YARD UPS ROOM (for main & stand by system) 1115.01 244 Kgs.
1115.02 ARRIVAL FLOOR UPS ROOM (for main & stand by system) 1115.02 190 Kgs.
1115.03 BASEMENT MEZZANINE UPS ROOM (for main & stand by system) 1115.03 848 Kgs.
1115.04 BASEMENT MEZZANINE BMS ROOM (for main & stand by system) 1115.04 832 Kgs.
1116.00 Providing & Fixing Discharge Nozzles designed to provide the proper flow rate and distribution of gas to total flood a hazard area : (180/360 deg. As per 1116
requirement) 12 Nos.
1117.00 Providing & Fixing Micro-processor based Alarm Panel (addressable panel of single loop) for required devices capacity, discharge module with minimum 1117
80 character LCD type display & LED indication for all zones, complete with internal sounder, alarm/fault indications & standby 24 v lead acid batteries
with charger. This panel needs to be compatible with the central BMS/BAS System through interface convertors. 4 Nos.
1118.00 Providing & Fixing Gas Release Panel with 2-Zone Fire detection and 1-Zone gas discharge module with binary switch timer for release delay and potential 1118
free contact to relay "Gas Release" signal panel. This panel needs to be compatible with the Fire Alarm Panel and shall be UL Listed. 4 No.
1119.00 Providing & Fixing Electronic Hooter with flashing type multi-Strobe for combined audio + visual alarms, to be wired and located as per instructions of the 1119
engineer-in-charge. 8 Nos.
1120.00 Providing & Fixing Abort Switch of approved Pull-Type, as per approved location 1120 4 Nos.
1121.00 Providing & Fixing Release Switch as per approved location. 1121 4 Nos.
1122.00 Providing & Fixing Key-operated selector switch between the Main and Reserve Gas Banks. 1122 4 Nos.
1123.00 Providing & addressable Photoelectric/ Ionization Smoke detectors complete with mounting base LED, address switch, as per requirements. 1123
12 Nos.
1124.00 Providing & Fixing 1.5mm X 2 core Fire Survival Armoured cable, with Copper conductor (600/1000V) having Cross linkable Ethylene Propylene Rubber 1124
(EPR) insulation with Low Smoke Zero Halogen (LSZH) inner & outer sheath, basic design as per BS-7846:2009 / IEC 60502 Part-1:2004. Should retain
Circuit Integrity @ 8500C for minimum period of 2 Hrs as per BS 8519:2010, BS 8491:2008 Cat.3 (120 mins.), BRE Global – UK Certified or approved 200 Metre
Equivalent.
1125.00 Providing & Fixing MS pipes (Seamless piping as per ASTMA 106, Grade 'B' Schedule 40) including all necessary fittings for all low side piping, and MS 1125
pipes (Seamless piping as per ASTMA 106, Grade 'C' Schedule 80) for Manifold for 2 nos. Cylinders. (1 Working + 1 Standby) including all necessary fittings 1 Lot.
as per NFPA 2001 guidelines including all structural supports.
1126.00 Providing & Fixing Interface modules for communication between Gas Release Panel and specified compatible devices as per the instructions of the 1126
engineer-in-charge. 8 Nos.
1127.00 Making Electrical Connections to the Fire Alarm Main Panel including all necessary material and accessories as per requirements and as per instructions 1127
of the engineer-in-charge. 4 Job
1128.00 Providing & fixing Photo-luminiscent Gas Release caution sign boards for approved locations. 1128 8 Nos
1129.00 Providing & fixing M.S. structural work fabricated from standard section e.g. M.S rounds, angles, channels, plates including cutting to size,drilling,welding 1129
fixing and welding to insert plates in RCC structural members as directed by engineer-in-charge including cutting and making good the walls, ceilings and 300 Kg.
floors. (As per the Instructions of the Engineer-In-Charge)
1130.00 Conducting Integrity Test as part of installation / erection & commissioning, to be witnessed by Client/Consultants. Tests to be performed for entire 1130
hazard area to be protected with Gas Agent, using an approved type blower door-fan equipment. (Optional, as per Clients Requirements)- for each room. 1 Job
0 0
b) Solar PCU Upto 300 Kw (27 KW X 11 Nos. including suitalble nos. of MCCB's for each) b)
Power conditioning unit will comply the following requirements.
• 415V AC + 5% 50Hz, 3 Phase
• Overload capacity – 150% for 60sec.
• Output wave shape: sine wave with <3% total (THD).
• Adjust the Voltage and Frequency Levels to suit the Grid - 1 Set
0 0
c) Module Mounting Structure & Stand c) 0 0
The array structure shall be made of hot dip galvanized MS angles of size not less than 50mm x 50mm x 6mm size. The minimum thickness of galvanized
shall be at least 70 microns. All nuts & bolts shall be made of good quality steel. The work should be completed with supply, fitting fixing of clamps,
saddles, nut & bolts etc. While quoting the rate, the bidder may mention the design & type of structure offered. All nuts & bolts shall be made of very
good quality steel. The structure shall be designed to allow easy replacement of any module and shall be in line with site requirements. The structure
shall be designed for simple electrical installation. It shall support SPV modules at a given orientation, absorb and transfer the mechanical loads to the
ground properly. There shall be no requirement of welding or complex machinery at site. The array structure shall be so designed that it will occupy
minimum space without sacrificing the output from SPV panels & shall withstand heavy winds. The supplier / manufacturer shall specify installation
details of the PV modules and the support structures with appropriate diagrams and drawings and got approved from the consultant/engineer in charge.(
for app. 100kWp out of 300kWp system above service yard ,minimum 2.4 mtr. clear height shall be provided) - 1 Job
0 0
d) Supply , laying, installation, testing and commissioning of Following size FRLS unarmoured PVC copper cables complete. The cables between array d)
interconnections, array to junction boxes, junction boxes to DCDB, DCDB to PCU etc. shall be so selected to keep the voltage drop and losses to the
minimum. Contractor required to mention each size of cables used and should consider their resistance / impoptimization. Such calculation should be
submitted along with the bid.
0 0
i) 1C X 25 Sq. mm PVC Cu cable - 1500 Mtr. i) 0 0
ii) 1C X 4 Sq. mm PVC Cu cable - 800 Mtr. ii) 0 0
iii) 4 C X 25 Sq. mm PVC Cu cable - 1000 Mtr. iii) 0 0
e) Array Junction Box as required e)
The junction boxes shall have suitable arrangement for the following:
• Combine groups of modules into independent charging arrays that shall be wired to the controller.
• Provide arrangement for disconnection for each of the groups.
• Provide a test point for each sub
• To provide group array isolation.
• The rating of the JB’s shall be suitable with adequate safety factor to inter connect the Solar PV array.
• Metal oxide varistors shall be provided inside the Array Junction Boxes. - 6 Nos.
0 0
f) Earthing Kit f)
The array structure of the PV yard shall be grounded properly using adequate number of earthing kits. All metal casing / shielding of the plant shall be
thoroughly grounded to ensure safety of the power plant. Earthing shall be in line with IE rules. The earthing & grounding shall also meet the
requirement of PV module/cell manufacturer. - 1 No.
0 0
g) Surge Protector g)
The DIN channel mountable pluggable surge protection shall be installed in a network configuration, consisting of a single block MOV (Metal Oxide
Varistor) based surge arrester having nominal surge handling capacity of 15 KA 8 maximum surge handling capacity of 30 KA 8/20 μs to provide
protection between (L+, L-, earth). All surge arresters in these network configurations shall be of same manufacturer. The Protection unit shall be based
on Single block High Capacity Metal Oxide Varistors (MOV), capable of handling 15 KA 8/20 surges and shall be able to give an indication in the event
module failure and shall be pluggable to facilitate the on site replacement without disturbing the lines. One extra set of replacement protective device
shall be furnished to the job site. Protection shall be manufactured to withstand a maximum continuous operating voltage of not less than 115% of
normal RMS system voltage - 1 Set
0 0
Solar System as Above 1 Job
Total 0 0
Y WATER TREATMENT PLANT Y 0 0
1132.00 In-line vertical multistage centrifugal clear water pump set 1132 0 0
Supply, Installation, Testing and Comissoning In-line vertical multistage centrifugal clear water pump set SS-304 casing, SS-304 impeller, SS-316 shaft, CI
base with CED coating, complete directly coupled with TEFC induction motor of class "F" insulation & efficiency class IE-3, 2900 RPM, suitable for
operation on 415 volts ±10%, 3 phase, 50 Hz, A.C. supply ( with mechanical seal ), pressure gauges with gunmetal isolation cocks, vibration elimination
pads, etc. mounted on a MS base frame bolted to cement concrete foundation etc. complete in all respects and as per technical speicification with the
following capacities:
1 Set
1133.02 Soft Water Supply Pumps 1133.02
Duty of each pump suitable for:-
No. of Pumps : 2nos. (1 W + 1 S)
Capacity : 35 m3/hr of Each Pump
Head : 30 Meters
Air Vessel : 100 ltr tank
Note:-1 set consists of 2 nos. of pumps (1Working + 1Standby)
1 Set
1134.00 Tubewell Submersible pump 1134
Providing and Fixing submersible pump of tubewell for suitable rating, chrome steel shaft, suitable for operation on 400 volts + 10% - 15 %, 50 C/s A.C
3 phase supply, speed 2900 RPM, including necessary submersible cable of 2x3x6 Sq. m. size, outdoor type M.S. control panel and all other accessories
required to make it completely functional as per the satisfaction of the Engineer-In-Charge, based upon the following specifications:
Discharge: Approx. 350 LPM
Recommended Head : 80 M min.
Control Panel - 1 Nos, STAR DELTA starter of required rating (M.S. Fabricated in cubicle pattern).
Note: The duty of the Submersible pump may vary after the boring is completed. Approval to be taken before ordering and the discharge and head
may be modified up to ±10% at no extra charges.
8 Each
1135.00 Pressure Sand Filter 1135
Supply, Installation, Testing and Commissioning of vertical Pressure Sand Filter (comprising of minimum 750mm media in four graded layer and
minimum Height on Straight 1500mm) fabricated from high performance M.S plate of minimum 10mm thick for shell & 12mm thick for dished ends,
(Quality of Steel as per IS:2062 Grade B, thickness as per ASME Section 8),Tested to 5.0 Kg/m2 , internally treated with coal-tar epoxy, air scouring,
collection system initial charge of media, M.S face piping with necessary flanges, gaskets, isolating valves, accessories, nuts & bolts, external painting
with 2 coats of red oxide primer and enamel paint etc. with suitable foundation boits & other accessories, mounting frame, complete as required & as
specified as per directions of the engineer-in-charge. with the following:
Discharge : 46 m3/Hour Each
Filtration Rate : 17500 lit./m2/h
Dia. : 1.9 m I.D.
3 Each
1136.00 Water Softener 1136 0
Supply, Installation, Testing and Commissioning ‘Cation’ anion exchange process water softener fabricated from minimum 8 mm thick M.S. plate on
min. shell and 10 mm thick M.S. plate on dished ends (Quality of Steel as per IS:2062 Grade B, thickness as per ASME Section 8) complete with initial
charge of filter media and resins, face piping accessories, diaphragm valves of approved specifications, HDPE Brine tank of min. 500 Liters, piping
testing and commissioning complete with resins of approved quality and make and regeneration assembly complete with valves, ejector, brine suction
valves and piping. (Bidder must indicate type and quantity of resin used and quantity of salt required per regeneration). All internal parts of the
softener shall be rubber lined as per technical specifications.
0
1136.01 For Blending & HVAC purposes 1136.01
Minimum expected rate of flow: 35000 lph
Total soft water to be produced between two regenerations: 420 Cu.m
Expected raw water hardness : app. 450-500 ppm
Expected treated water hardness: less than 50 ppm (Zero Commercial Hardness)
Max. working pressure : 4 Kg/cm2
2 Each
1136.02 Supply, Installation, Testing and Commissioning Salt Saturator assembly (for supply of salt solution) consisting of HDPE tanks with automatic agitators and 1136.02
all required accessories for holding and supplying salt for softener complete in all respects, including providing and fixing vertical, inline multistage
centrifugal pumping set with stainless steel SS-316 L stage casing and SS-316 L impellers with stainless steel shaft and suction & discharge casing .
The effective capacity of the system to be of minimum 10% greater than actual salt required for approx. 3 Days with complete structural arrangement
including RCC foundation etc. as per instructions of engineer-in-charge and approved fabrication shop drawings.
(i) Recommended no. of tanks = 1 Nos.
(ii) Total Capacity of each Tank = 5 000 Liters
(complete set as mentioned above)
2 Set
1136.03 Chlorinator 1136.03
Supply, Installation, Testing and Commissioning chemical dozing system consisting of 2 nos. electronic dosing pumps (1W+1S) of approved make with
all accessories, suitable to doze chemical solution upto 1 ppm doze (of Sodium Hypo-chloride solution) to a filtered water flow of 138000 lph against
a pressure of 1.5 kg/cm2 complete with FRP moulded solution holding tank of min. 200 litre with all standard accessories & structural arrangement
including suitable foundation bolts & other accessories etc.complete as per technical specifications.
Note:1 set consists of 2 nos. of pumps(1W+1S)
1 Set
1136.04 Drainage Sump Pump for Plant room & basement 1136.04 11
Supply, installation, testing and commissioning compact monoblock dry motor submersible pumps of suitable rating, with non-clog free flow open
impeller, solid handling capacity of upto at least 28mm suitable for operation on 415 volts +10% , 3 Phase, 50Hz, A.C supply, speed 2900 RPM including
oil chamber, guide wire for lifting & lowering of pump, G.I. galvanized lifting chain, complete.
The above pump sets must be supplied complete with following accessories.
Piping of 80mm dia for individual pump delivery line and 100mm dia for common delivery line, to be terminated outside the sump. (The pipe material
should be Medium duty G.I) -- 1 Set
80mm dia Butterfly valve.-- 2 Nos
80 mm dia reflux valve.-- 2 Nos
Necessary cables from pump set to control panel (position of panel marked in enclosed layout in plant room).-- 1 Set
Electrical switch panel with DOL starter having all necessary accessories & safety devices of standard specifications. (Panels with sump pumps near
each sump as per site conditions). --1 No.
Automatic built-up water level controller with necessary length of cable upto control panel.
Each set consist of 2 nos.of pumps - 1 working & 1 stand by (Complete set as above with 2 nos. pumps including cost for valves, piping, Control Panel and
Cabling, Level Controllers etc as required and as specified) 2.The entire system alongwith pumps & control panel must be sourced from single
manufacturer only for unit responsibility.
Discharge - 250 LPM Each
Total head - 15 Meters (minimum)
Set
1136.05 Sewerage Sump Pump for basement toilets 1136.05
Supply, installation, testing and commissioning compact monoblock dry motor submersible pumps for suitable rating, with non-clog free flow open
impeller, suitable for operation on 220/400 volts + 10% -15% minimum solid handling capacity of 46 mm suitable for operation on 240 volts + 5% -15%,
50 C/s A.C single phase supply, speed 960/1440 RPM including oil chamber, guide wire for lifting & lowering of pump, G.I galvanized lifting chain, with
following specifications:
The above pump sets must be supplied complete with following accessories.
Piping of 80mm dia for individual pump delivery line and 100mm dia for common delivery line, to be terminated outside the sump. (The pipe material
should be Medium duty G.I) -- 1 Set
80mm dia Butterfly valve.-- 2 Nos
80 mm dia reflux valve.-- 2 Nos
Necessary cables from pump set to control panel (position of panel marked in enclosed layout in plant room).-- 1 Set
Electrical switch panel with DOL starter having all necessary accessories & safety devices of standard specifications. (Panels with sump pumps near
each sump as per site conditions). --1 No.
Automatic built-up water level controller with necessary length of cable upto control panel.
Each set consist of 2 nos.of pumps - 1 working & 1 stand by (Complete set as above with 2 nos. pumps including cost for valves, piping, Control Panel and
Cabling, Level Controllers etc as required and as specified) 2.The entire system alongwith pumps & control panel must be sourced from single
manufacturer only for unit responsibility.
No. of Pumps : 2 nos (1 working + 1 stand by)
Discharge - 200 LPM Each
Total head - 15 m
1 Set
1137.00 Provding and fixing heavy duty G.I. pipe (For Suction & Delivery of pumps and equipment) confiming to IS. 1239 upto 150 mm and IS 3589 for dia 200 1137 0 0
mm and above with reducers, tees, flanges, elbow, crosses, union etc. and fixing the pipes on wall / ceiling / beam / floor including Clamping/Supporting
the same, including painting with 2 coats of bitumastic enamel paint as per the site requirement and shall be duly painted with two coats of approved
quality bitumastic enamel paint & shade over a readymix primer coat complete as required & as per directions of the engineer-in-charge for the following
sizes:
0 0
F) R.O. modules made out of Spiral Wound Thin Film composite suitable to withstand pressure of 20kg/sq.cm. Suitable BSPT/NPT connections shall be used F)
for connecting feed & reject ends. the modules shall be supplied complete with all necessary instrumentation, valves for sampling, drain, reject &
permeate, epoxy-coated structural steel bases and supports, as per following system capacity requirements:
0 0
(i) Total net treated water output of system = 8000 LPH 0 0
(ii) System recovery = 50 - 60 % 0 0
(iii) Filtration area per membrane = 85 sq.ft. 0 0
(iv) Number of membranes = The total number of membranes required shall be as per requirements, supported by calculations from the vendor.
0 0
G) Clean in place pump of horizontal end suction suitable for a flow rate of 16000 LPH at required head with 100 ltr HDPE tank. The pump construction shall G)
be of stainless steel SS-304. The motor shall be TEFC suitable for a supply of 415V/3 phase/50Hz supply. The pump shall be supplied complete with base
channel, coupling, foundation bolts, pressure gauge at inlet & outlet of the pump. -- 1 Set
0 0
H) Centralised PLC control panel as per details given in technical specifications H) 0 0
I) Instrumentation mounted in R.O. system/panel as per details given in technical specifications I) 0 0
J) First fill of all chemicals and lubricants to commission and operate the plants. --1 Lot J) 0 0
k) All interconnecting piping work with valves:- k) 0 0
i) Low Pressure Side till R.O. feed water pump. Piping shall be of extra strong PVC and all valves shall be of extra strong PVC and all valves shall be PVC ball i)
valves. -- 1 Lot
0 0
ii) High Pressure side piping from the R.O. high pressure pumps to the reject stream control valves shall be of SS - 304 using all SS fittings ball valves of ii)
suitable pressure rating shall be used till 25 mm size, above 25 mm, flanged globe/ wafer butterfly valves in SS construction shall be used. Rejects
pressure control valves shall be globe valve and feed flow control valve shall be of SS-304. -- Lot
0 0
(All for above from "A" to "K" complete) 1 Set
1148.00 Complete Stainless Steel treated water storage tank (double Wall ) of capacity 15000 Litres including all inlet/outlet connections, accessories, valves, 1148
double seal manhole covers, insulation etc. The Stainless steel tank must be ozone resistant and to be used as ozone contact tank. Fabrication to be done
as per approved shop drawing.
1 Set
1149.00 Providing and fixing PVC water storage tanks, for 15000 lit. capacity, of the approved quality including making solid supported base as per instructions 1149
and making all connections to the tank as required to make the tank functioning in all respects of the following capacity .
1 Each
1150.00 Hydropneumatic pump for R.O water Supply 1150
Providing fixing and commissioning suitable complete composite hydropneumatic system consisting of horizontal/vertical multistage centrifugal pump
having stainless steel impellers, stainless steel shaft, stainless housing and single mechanical seal and pressurised tank of required specifications and of
non-toxic rubber diaphragm, complete with all accessories including pressure switch, pressure gauge and electrical panel with all necessary protection
and operational devices i.e alternate pumping operation and shut off during dry running conditions etc., and inclusive of suction and delivery manifold of
required size with non-return valve and ball valve and with suitable electrical motor efficiency IE-3 to be operated on 210/220 or 400/440 volt 50 cycle
suitable for following duty and with total no. of pumps - 2 nos. (1 working + 1 standby) complete with the approval of Engineer-in-charge.
a) Discharge : 8000 LPH
b) Maximum head : app.70 M
Vessel (FRP) : As Required
1 Set
1151.00 Supply installation, testing and commissioning of recessed bi level drinking water fountain, with double ss finish bubbler. Drinking water fountain with 1151
8GPH cooling capacity, stainless steel body,approx size 1003mmX Depth 400 mmX hight 1035mm, SS bubbler guard operated between 50 to 120 PSI,
chilling unit suitable for R134a refrigerant, adjustable thermo state, supply complete with all accessories.R-134a refrigerant. Shall comply with ANSI 117.1
and ADA. Shall be listed by Underwriters Laboratories to US and Canadian standards. Shall comply with ANSI/NSF 61 and NSF/ANSI 372
12 Each
1152.00 Providing and fixing Electrically Operated Hand Drier to be operated with 220 volts single phase, with fully hygienic condition, with all accessories 1152
including cutting and making good the walls wherever required
88 Each
TOTAL FOR WATER TREATMENT PLANT 0 0
Z Sewage Treatment Plant (Capacity 1950 KLD) Z 0 0
(Constructed in 3 nos modules of 650 kld capacity each) 0 0
1153.00 Raw Sewage Relift Pumps (Equilization Tank) 1153
Supply, installation, testing & commissioning of dry motor submersible pumps of suitable rating, with non-clog free flow open impeller, solid handling
capacity of minimum 46 mm suitable for operation on 415 volts ± 10% , 3 Phase, 50Hz, A.C supply, speed 2900 RPM synchronous speed of approved
make including oil chamber, M.S. galvanized lifting chain complete. The pump sets shall be supplied with required accessories, valves, fittings, cables and
control panel etc. & as per specification below:
Electrical control panel suitable for controlling three pumps having all necessary accessories & safety devices of manufacturers specifications and
suitable for receiving incomer and outgoing cables complete as reqd (Panels will be installed near each sump as per site conditions). --1 No.
No. of Pumps : 3 (2W + 1S)
Capacity : 16m3/hour of each pump
Head : 10m
Note:-1 set consists of 3 nos. of pumps (2Working + 1Standby)
3 Set
1154.00 Air Blower 1154
Supply, installation, testing & commissioning of Air blower with air filter and TEFC induction motor 400 / 440 volts, 50 cycle connected to blower with
direct coupled and mounted on common base frame and providing cement concrete foundation and complete with first fill oil & of following
specification. (Complete in all respect & as per the Instructions of the Project Manager)
No. of Blowers : 3 (2W + 1S)
Capacity : 300m3/hour Each
Head : 5-6 M
Note:-1 set consists of 3 nos. of (2Working + 1Standby)
3 Set
1155.00 Air Diffuser 1155
Providing and fixing membrane diffusors in EPDM / High Grade Silicon material (Coarse & Fine Bubble as per requirements) with connections to air
piping by threaded means, of disc type required as per process requirements complete with testing and commissioning etc.as specified and as required.
360 Each
1156.00 Sludge Return / Re-lift pumps 1156
Supply, installation, testing & commissioning of centrifugal Sludge Return / Re-lift pumps for the transfer of sludge from secondary settling tank with Cast
Iron impeller and cast steel shaft with mechanical seal, with TEFC induction motor of class "F" insulation & efficiency class IE-3, suitable for operation on
415 volts ±10%, 3 phase, 50 Hz, A.C. supply, 2900 RPM of approved make complete in all respects with cement concrete foundation and as per
specification.
No. of Pumps : 2 (1W + 1S)
Capacity : 20 m3/hour of each pump
Head : 20 M
Note:-1 set consists of 2 nos. of pumps (1Working + 1Standby)
3 Set
1157.00 Sludge Loading / Disposal pump 1157
Providing and fixing Screw Type Sludge loading / Disposal pump in cast iron body, hardened steel / SS single helical rotor and shaft, with safety release
valve, Non return valve and all necessary accessories with TEFC induction motor of class "F" insulation & efficiency class IE-3, suitable for operation on
415 volts ±10%, 3 phase, 50 Hz, A.C. supply complete in all respects with cement concrete foundation and as per specification.
No. of Pumps : 3 (2W + 1S)
Capacity : 3 m3/hour of each pump
Head : 40 M
Note:-1 set consists of 3 nos. of pumps (2Working + 1Standby)
1 Set
1158.00 Clear Water Pump 1158
Supply, installation, testing & commissioning of In-line vertical multistage centrifugal clear water pump set of approved make with SS-304 casing, SS-304
impeller, SS-316/SS431 shaft, CI base with CED coating, complete directly coupled with TEFC induction motor of class "F" insulation & efficiency class IE-
3, 2900 RPM, suitable for operation on 415 volts ±10%, 3 phase, 50 Hz, A.C. supply (with cartridge type mechanical seal), pressure gauges with gunmetal
isolation cocks, vibration elimination pads, etc. mounted on a MS base frame bolted to cement concrete foundation complete in all respects and as per
specification.
0 0
1158.01 Filter Feed Pump 1158.01
No. of Pumps : 2 (1W + 1S)
Capacity : 41 m3/hour of each pump
Head : 25 M
Note:-1 set consists of 2 nos. of pumps (1Working + 1Standby)
3 Set
1158.02 Softener Feed Pump 1158.02
No. of Pumps : 2 (1W + 1S)
Capacity : 33 m3/hour of each pump
Head : 25 M
Note:-1 set consists of 2 nos. of pumps (1Working + 1Standby)
1 Set
1159.00 Hydropneumatic Pumping System With Variable Frequency Drive 1159
Supply, Installation, Testing and Commissioning of compact packaged type skid mounted, self contained variable frequency drive hydropneumatic system
complete as required & as per specification with the following:-
(i) In- line vertical multistage centrifugal clear water pump set with SS-304 casing, SS-304 impeller with SS-316/SS431 shaft ,CI base with CED coating
complete directly coupled with TEFC induction motor of class "F" insulation & efficiency class IE-3, 2900rpm, suitable for opertion on 415 Volts ±10%, 3
phase, 50 Hz A.C. supply complete.
(ii) The entire system shall be mounted on a common base frame i/c common suction and common delivery of G.I heavy class pipe headers with flanges,
interconnecting piping with all required Conrol Valves, Non-return valves, pressure guage with isolation cock etc. and all requried accessories.
(iii) Pressure vessel of non corrosive FRP composite construction lined with NSF and/or FDA listed material, like high density polyethylene with fully
replaceable polyurethane. Air cell burst pressure of minimum of 5 times the vessel operating pressure and cycle tested for 80,000 cycles with charging
connections to dischage pipe line with necessary flanges, gaskets, isolating valve, nuts/ bolts etc. with suitable foundation bolts & other accessories,
complete.
(iv) Control Panel with programmable logic controller (PLC) for cyclic operation of pumps + Variable Frequency Drive. The Pump working sequence should
change after every operation.Contractor overload relays and MCBs should confirm to IEC 898 – 1995/ specifications. Blinking indications for pumps start,
trip, low level trip, health supply should be provided in the panel along with the ammeter & voltmeter. Control panel should also consist of cooling fan.
(v) Pressure switches bellow type fitted with micro switch and having maximum pressure and differential scale should confirming BS-6134 standards
and IP55 protection class.
(vi) All required Ball Valves, Non-return valves, flexible connectors etc. and all required accessories, Heavy Duty G.I. Manifold to make the system
completely operational as a skid mounted system. Ball valves to be used should be Hot Pressed brass OT-58 with stainless steel ball and P.T.F.E seal and
O-Ring. NRVs to be used should be with Springs and O-Ring arrangement.
Complete manifold system shall be factory aasembled & totally mounted on a common base frame with following duties:
0 0
1159.01 Flushing Water Supply Pumps 1159.01
Duty of each pump suitable for:-
No. of Pumps : 4 nos. (3 W + 1 S)
Capacity : 26 m3/Hour of Each Pump
Head : 70 Meters
Air Vessel : 1 No of Min. 100 Liters Cap.
Note:-1 set consists of 4 nos. of pumps (3Working + 1Standby+1 Air vessel)
1 Set
1159.02 Garden hydrant Pump 1159.02
Duty of each pump suitable for:-
No. of Pumps : 2 nos. (1 W + 1 S)
Capacity : 23 m3/Hour of Each Pump
Head : 40 Meters
Air Vessel : 1 No of Min. 100 Liters Cap.
Note:-1 set consists of 2 nos. of pumps (1Working + 1Standby)
1 Set
1159.03 Soft water supply Pump 1159.03
Duty of each pump suitable for:-
No. of Pumps : 2 nos. (1 W + 1 S)
Capacity : 33 m3/Hour of Each Pump
Head : 35 Meters
Air Vessel : 1 No of Min. 100 Liters Cap.
Note:-1 set consists of 2nos. of pumps (1Working + 1Standby)
1 Set
1160.00 Agitator for Anoxic tank 1160
Supply, installation, testing & commissioning of agitator in anoxic tank for mixing the effluent in the Anoxic tank complete in all respest as per technical
specifications.
3 Each
1161.00 Dual Media Filter 1161
Supply, installation, testing & commissioning of vertical Dual Media Pressure Filter (comprising of minimum 300mm bed depth of Anthracite and support
media and minimum Height on Straight 1500mm) fabricated from high performance M.S plate of minimum 10mm thick for shell & 12mm thick for
dished ends,(Quality of Steel as per IS:2062 Grade B, thickness as per ASME Section 8),Tested to 5.0 Kg/cm2 , internally treated with coal-tar epoxy / FRP
lined, air scouring, collection system initial charge of media, M.S face piping with necessary flanges, gaskets, isolating valves, accessories,nuts & bolts,
external painting with 2 coats of red oxide primer and enamel paint etc. with suitable foundation boits & other accessories, mounting frame, complete
with testing and commissioning etc.as required & as specified.
Discharge : 41 m3/Hour Each
Filtration Rate : 17500 lit./m2/h
Suggested dia app. : 1.8 m
3 Each
1162.00 Activated Carbon Filter 1162
Supply, installation, testing & commissioning of vertical Activated Carbon Filter (comprising of minimum 450mm depth of Activated Carbon and support
media and minimum Height on Straight 1500mm) fabricated from high performance M.S plate of minimum 10mm thick for shell & 12mm thick for
dished ends, (Quality of Steel as per IS:2062 Grade B, thickness as per ASME Section 8),Tested to 5.0 Kg/m2 , internally treated with coal-tar epoxy, air
scouring, collection system initial charge of media, M.S face piping with necessary flanges, gaskets, isolating valves, accessories,nuts & bolts, external
painting with 2 coats of red oxide primer and enamel paint etc. with suitable foundation boits & other accessories, mounting frame, complete with
testing and commissioning etc. as required & as specified with the following:
Discharge : 41 m3/Hour Each
Filtration Rate : 17500 lit./m2/h
Suggested dia app. : 1.8 m
3 Each
1163.00 Water Softener 1163
Supply, installation, testing & commissioning of ‘Cation’ ANION exchange water softener fabricated from minimum 8 mm thick M.S. plate on min. shell
and 10 mm thick M.S. plate on dished ends (Quality of Steel as per IS:2062 Grade B, thickness as per ASME Section 8) complete with initial charge of filter
media and resins, face piping accessories, diaphragm valves of approved specifications, HDPE Brine tank of min. 500 Liters, piping testing and
commissioning complete with resins of approved quality and make and regeneration assembly complete with valves, ejector, brine suction valves and
piping. (Bidder must indicate type and quantity of resin used and quantity of salt required per regeneration). All internal parts of the softener shall be
rubber lined as per technical specifications.
Minimum expected rate of flow: App. 33000 lph
Total soft water to be produced between two regenerations: app. 400 Cu.m
Expected raw water hardness : app. 450-500 ppm
Expected treated water hardness: less than 50 ppm (Zero Commercial Hardness)
Max. working pressure : 3 Kg/cm2
1 Each
1164.00 PH Dosing System at Anoxic tank 1164
Supply, installation, testing & commissioning of chemical dozing system of approved make with all accessories, suitable to doze chemical solution upto 1
ppm doze (of Sodium Hypo-chloride solution) to a filtered water flow of 41,000 lph. against a pressure of 1.5 kg/cm2 complete with FRP moulded
solution holding tank of min. 100 litre with all standard accessories & structural arrangement including suitable foundation bolts & other accessories
etc.complete as required and as specified.
System : Metering Type
Capacity : 0-12 LPH
Feed solution: Hypochlorite/pH Dosing / polyelectrolyte
Conc. of solution : 0.1
MOC of tank & Capacity: FRP - 100 Liters
Nos. of pumps : 2 (1w+1s)
Note:-1 set consists of 2 nos. of pumps (1Working + 1Standby)
3 Set
1165.00 Drainage Sump Pumps for Plant Room Drainage 1165
Supply, installation, testing & commissioning of compact dry motor submersible pumps of suitable rating, with non-clog free flow open impeller, handling
capacity of 28mm suitable for operation on 415 volts +10% , 3 Phase, 50Hz, A.C supply, speed 2900 RPM of approved make including oil chamber, guide
wire for lifting & lowering of pump, M.S. galvanized lifting chain, duck foot bend complete. The pump sets shall be supplied with required accessories &
as per specification with all accessories and control system.
Necessary cables from pump set to control panel (position of panel marked on enclosed drawings).- 1 Set
Electrical control panel suitable for controlling two pumps having all necessary accessories & safety devices of manufacturers specifications and suitable
for receiving incomer and outgoing cables complete as reqd (Panels will be installed near each sump as per site conditions). --1 No.
No. of Pumps : 3 (2W + 1S)
Discharge: 15 m3/hr
Total Head : 15 metre
Note:-1 set consists of 3 nos. of pumps (2Working + 1Standby)
1 Set
1166.00 Sludge Handling Mechanism (Centrifuge) 1166
Supply, installation, testing & commissioning of of sludge handling arrangement (Centrifuge) solid bowl type for upto 100 deg. Celsius temperature
complete with motor of 3000 rpm including VFD Controller to be placed on a platform above the ground with arrangement for sludge feed to centrifuge
from screw type sludge pumps at a distance as required with watering and flushing arrangement. Effluent from Centrifuge to be connected to
equilization tank and the entire equipment mounted on MS base frame bolted to cement concrete foundation complete with testing & commissioning as
required and as specified.
Nos. : 1
Capacity : 3 m3/ hr
2 Each
1167.00 UV DISINFECTION SYSTEM 1167
Supply, installation, testing & commissioning of Online UV system with IP-54 rated cabinet housing in sheet steel wth electrophoretic dipcoat priming and
powder coated finish, and SS-316 treatment chamber material, with electronic ballast type,suitable for operation on 230 volts , 50Hz, for installation on
the pressurized discharge line, suitable for tertiary treated wastewater of min. transmissivity of 65% complete with testing & commissioning as required
and as specified.
0 0
1167.01 Capacity : 23000LPH 1167.01 1 Each
1167.02 Capacity : 33000LPH 1167.02 1 Each
1167.03 Capacity : 93000LPH 1167.03 1 Each
1168.00 Sludge Trolley 1168
Fabrication and supply of sludge trolley in Galvanized Steel with min. Dimensions of 950 mm x 600mm x 500 mm depth (min. sheet thickness 2.0 mm)
with handle and wheel barrow for transport of sludge complete as per requirements as specified.
2 Each
1169.00 Bar Screens 1169
Supply, installation, testing & commissioning of manually cleaned Bar Screens, to remove coarse and fine material in the waste water made up of FRP
complete as required including handle for lifting.
Coarse Screen (for 0.6 m/s inlet velocity and 0.9 m/s outlet velocity, with 8 to 10 mm c/c spacing of bars.
3 Each
1170.00 BIO- Media for Aeration tank 1170
Supply, installation, testing & commissioning of suspended/floating bio-media(moving bed bio-media/MBBR media ) as per technical specifications with
PVC/PP material of construction , with max. operating temperature of 55OC, complete as per requirement.
135 Cum
1171.00 BIO- Media for Tube settler 1171
Supply, installation, testing & commissioning of suspended/floating bio-media(for tube settler) as per technical specifications with PVC/PP material of
construction , UV-stabilized, with max. operating temperature of 55OC, complete as per requirement.
67 Cum
1172.00 Providing and fixing uPVC pipes (I.S:4985-2000) Class - 5 (Min. 10 Kg/cm2) with bends, junctions, elbows, tees, offsets etc. jointing with screwed joints, 1172
cutting holes in walls, fixing the pipes on wall / ceiling / beam / floor including Clamping/Supporting the same as per the site requirement wherever
required and making good complete as required & as per specification (For Air Piping)
0 0
1172.01 25mm OD 1172.01 150 Metre
1172.02 32 mm OD 1172.02 150 Metre
1172.03 40 mm OD 1172.03 100 Metre
1172.04 50 mm OD 1172.04 150 Metre
1172.05 63 mm OD 1172.05 100 Metre
1172.06 75 mm OD 1172.06 100 Metre
1172.07 90mm OD 1172.07 180 Metre
1172.08 110 mm OD 1172.08 150 Metre
1172.09 160 mm OD 1172.09 50 Metre
1173.00 Providing and Fixing sluice valve, 200 mm dia, of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, 1173
washers, gaskets, conforming to IS 14846 of following sizes as required .
3 Each
1174.00 Supply & Consumption of Consumables, solutions, chemicals, etc. for STP operation and maintenance including sucessful operations for 2 weeks upto 1174
commissioning stage / certification of STP.
1 Lot
1175.00 INSTRUMENTATION EQUIPMENTS & INSTRUMENTATION DETAILS/ LABORATORY APPARATUS 1175
Supply, Installation, Testing and Commissioning of Laboratory Apparatus including Glassware lab Equipments (As per Details below)
0 0
(A) Supply of following Laboratory Apparatus 0 0
(a)Type: Bulk Discharge / Electro Magnetic Type 0 0
(b)Capacity: 0 to 150%of Peak Discharge 0 0
(c)Make: As per approved List 0 0
PH Meter (Digital with Electrodes): pH 1.0 to 14.0 - 1No. 0 0
Conductivity Meter: As per approved List -1No. 0 0
DO (Dissolved Oxygen) Meter, E-Merck / EU Tech: 0 – 20 mg/l - 1No. 0 0
SS/Hardness Testing Apparatus: As per approved List -1No. 0 0
Energy Meter: As per approved List -1No. 0 0
Pressure Gauges: As per approved List -1Lot 0 0
Level Gauges: As per approved List -5Nos. 0 0
TDS Meter (Digital, Microprocessor based): Hand-held -1 No. 0 0
Ultrasonic Level Transmitter: Range 10 m, mounting: Integral (Tank Top) 0 0
Electronic Balance: As per approved List - 1No. 0 0
Hot Air Oven (Upto 250oC): 445 x 445 x 445 mm Aluminum Chamber with Digital Control -1No. 0 0
Muffle Furnace ( RT to 12000C): 150 x 150 x 350 mm -1No. 0 0
Heating Mantle ( 1L ): RT to 1200C -1No. 0 0
Water Distillation Apparatus (Stainless Steel): Capacity 4 L / Hr. -1No. 0 0
Hot Plate: 2 ft. x 1.5 ft. -1No. 0 0
Top Loading Electronic balance with all accessories.: Capacity 200 g, Accuracy 0.01 mg. -1No. 0 0
Magnetic Stirrer (w/ magnet) : 1 ltr. cap.-1No. 0 0
COD Heating Mantle: 6 Nos. COD Flasks -6No. 0 0
Jar Testing Apparatus: Capacity: 1Ltr., with six stirrer -1No. 0 0
BOD Incubator: 580 x 580 x 970,SS chamber, 5-500C, Accuracy:0.50C, Digital Controller -1No. 0 0
0.25 HP, Double stage, 50Lit/Hr, NRV & Pressure Gauge -1No. 0 0
(B) Supply of following Glassware lab equipments required for laboratory 0 0
Beakers: 100 ml: 4 Nos.
: 250 ml.: 4 Nos.
: 500 ml.: 2 Nos.
0 0
Reagent Bottles: 500 ml.: 6 Nos.
: 1000 ml.: 2 Nos.
0 0
Burettes: 25 ml x 1/10 ml.: 2 Nos.
: 50 ml x 1/10 ml: 2 Nos.
0 0
Graduated Cylinders: 50 ml x 1/10 ml.: 1Nos.
: 100 ml x 1/10 ml.: 2 Nos.
: 250 ml x 1/10 ml.: 2 Nos.
: 1000 mlx1/10 ml.: 2 Nos.
0 0
Flasks conical: 250 ml.: 6 Nos. 0 0
Dish Evaporating: 80 x 45: 10 Nos. 0 0
Imhoff cones: Size : 439 mm: 3 Nos. 0 0
COD Flasks, size 24/29: 250 ml.: 12 Nos. 0 0
Flasks Volumetric : 100 ml.: 2 Nos.
: 250 ml.: 2 Nos.
: 500 ml.: 2 Nos.
0 0
Flasks Boiling (Flat Bottom): 1000 ml.: 2 Nos. 0 0
Funnels : 100 ml.: 2 Nos. 0 0
Pipettes: 1 ml x 1/10 ml.: 2 Nos.
: 5 ml x 1/10 ml.: 2 Nos.
: 10 ml x 1/10 ml.: 2 Nos.
0 0
Bulb Pipette: 10 ml.: 2 Nos.
: 25 ml.: 2 Nos.
0 0
Dessicator : 150 x 15 mm: 1 No. 0 0
Test Tubes: 10 x 75 mm: 12 Nos. 0 0
Wash Bottles Plastic : 500 ml.: 2 Nos. 0 0
Glass Rods: : 2 Nos. 0 0
Pipette Bulb: : 2 Nos. 0 0
Spatula : 6”: 1 No.
: 8”: 1 No.
0 0
Tong: 6”: 1 No.
: 8”: 1 No.
0 0
Burette Stand: : 2 Nos. 0 0
COD Condenser, size 24/29 : : 6 Nos. 0 0
Pipette Stand: : 1 No. 0 0
Thermometer: 0-50oC: 1 No. 0 0
Whatman 40/42 Filters: : Lot 0 0
pH Paper: Mixed Range: Lot 0 0
Reagent Bottles Amber: 500 ml.: 2 Nos. 0 0
Glass Rods: 1 Kg: 1 No. 0 0
Separating Funnel : 250 ml.: 2 Nos. 0 0
INSTRUMENTATION EQUIPMENTS & INSTRUMENTATION DETAILS/ LABORATORY APPARATUS AS ABOVE 1 Set
TOTAL FOR SEWAGE TREATMENT PLANT (CAPACITY 1950 KLD) 0 0
AA LIFT & ESCALATOR AA 0 0
Design, Fabrication, Supply, Installation, Testing & Commissioning of following Electric Traction Type fully automatic Machine room less (MRL) Passenger 1176
lift with AC variable voltage & variable frequency drive unit suitable for operation on 415V, 3 Phase, 50 Hz. AC supply, having speed of 1.0 M/sec., power
operated centre opening type car & landing doors, electro-magnetic brake system, operating panel with luminous buttons, overload warning indicator,
battery operated alarm bell, emergency light, intercom suitable for hook up to AAI's EPABX, infrared ray sensing door protection for full height, reverse
phase relay on controller, fire man's switch at Main Landing floor, digital car positions indicator in car & at all floors with up / down direction, light
1176.00 fixtures, ventilation fan, landing sill, main beam in shaft for machine, pit ladder etc. complete with all accessories serving different floors in the lift shaft 0.00 0
along with Automatic Rescue Device (ARD) complete with dry maintenance free sealed batteries as required etc., as per detailed specifications enclosed
and as under: -
Lift No. L05, L06, L07, L10, L11, L12, L13 1176.08
20 Passenger Lift , 1360 Kgs @ 1.0 mps, 02 stops , 12.00 mtr rise in Simplex Control; SS Hairline Grade-304 Car with 2-Panel Automatic Power operated SS
1176.08 Hairline Grade-304 Doors of 1100 mm (Width) X 2400 mm (Height) , All Opening on Same Side and Counterweight Safety 7 Job
Design, Fabrication, Supply, Installation, testing and commissioning of reversible Escalators having capacity of 9000 passengers per hour at an operating 1177.02
speed of 30 linear meter per minute (0.5 meter per second), having step width not less than 1000mm between interior panel, angle of inclination of 30
degree (30°), suitable for a floor to floor rise of 5000 m (approx.) with electric motor, control, latest safety devices, control panel i/c stainless steel
1177.02 cladding,with auto start and auto stop. etc. for operation on 415V, 3 phase, 50Hz, AC supply system as specified and as required at site. 1 Job
Total 0.00 0
AA CCTV System AA
Supply, Installation, Testing & Commissioning of Enterprise level IP based Closed Circuit Television System (CCTV) based on the following elements and
as required to make the system complete and operational in all respects as per specifications, drawings, and standards as required with full compliant
with latest BCAS Circular.
0 0
1178.00 SERVERS & WORKSTATION 1178 0 0
1178.01 Database Primary Server: 1178.01
Supply, Installation, Testing & Commissioning of Database Primary Server for entire cameras - Complete as per specifications & preferred make. 1 Nos
1179.02 Supply, Installation, Testing & Commissioning of Video Analytic Software licenses for 300 cameras & requirement as per specification including Object left 1179.02
VA -50 cameras, License plate recognition - 10 cameras and Image Tracking (attribute search) -50 cameras- Complete as per specifications & preferred 1 Lot
make.
1180.00 Network Storage 1180
Supply, Installation, Testing & Commissioning of Network attached Storage (NAS) - Complete as per specifications & preferred make.
Network attached Storage (NAS) with required storage capacity
(To be estimated for 500 cameras with H.264, Full resolution @ 1920 X 1080, 25 FPS, 30 days of data retention + 25% Spare; The offered storage shall be
scalable to add additional 50% usable capacity at site within the same storage; No other upgrades should be required for desired scalability except for 1 Lot
disk Arrays enclosures and Disk drives as required. )
Primary Storage (30 days)
1182.00 Supply, Installation, Testing & Commissioning of following types of Cameras -Complete as per Specifications & Preferred make. 1182 0 0
1182.01 Indoor Dome Cameras - IP Day/night Colour Mega Pixel camera 1182.01 300 Nos
1182.02 Outdoor Dome Cameras - IP Day/night Colour Mega Pixel camera 1182.02 20 Nos
1182.03 SITC of Outdoor Fixed Cameras - Box type - IP Day/night Colour Mega Pixel camera 1182.03 42 Nos
1182.04 SITC of Indoor IP PTZ Dome Cameras 1182.04 20 Nos
1182.05 SITC of Outdoor PTZ Cameras, if required at site 1182.05 20 Nos
1182.06 SITC of Multi Sensor camera - 180º panoramic overview if required at site 1182.06 30 Nos
1182.07 SITC of Speed Dome Controller Joystick, complete as per specification 1182.07 10 Nos
1183.00 Integration 1183
Integration of CCTV system with other system which includes ACS, FAS,BHS,BMS & VHT for seamless alarm based CCTV camera image pop ups 1 L.Sum
Total Amount 0 0
AB PAVA System AB 0 0
1184.00 Network Server/Network Controller 1184
Supply, Installation, Testing & Commissioning of 19" rack mountable Digital Public Address and Emergency Sound System Controller certified to
International standards of Emergency Sound System EN 54 (IEC 60849) certified or equivalent and as per specifications. The cost shall include all required
Fiber Network cable/termination assembly. 1 Set
- 1 mains + 1 Hot stand by
1195.00 Supply, Installation, Testing & Commissioning of 19" rack-mountable Workstation (as per specifications) based Music player capable of playback of 1195
common digital media like MP3/ MP4/WMA/ AVI/ WMV/ DivX etc., with minimum 500GB hard disk, with full function for facilities like skip/ shuffle/ 1 Lot
repeat as per specification & approved make.
1196.00 SITC of hemispeherical direction noise sensing microphone two in each public/passenger area zone - Flush/surface mounted to the approval of architects 1196
- complete as per specifications. 1 Lot
1197.00 19"Rack mountable Digital Ambient Noise Controller, two balanced Line Inputs and Outputs, one Ambient Noise Sensor Microphone Input and one 1197
Monitor Output. Digital ambient noise control (ANC) function to automatically adjusts output gain to match changes in ambient noise levels. - Complete 2 Nos
as per specifications.
1198.00 IP based Auto Dialer with Digital voice processor to access EPABX link for Fire tender request. Auto dialer should be able to dial out minimum of 4 1198
telephone/mobile numbers and relay digital message of Mini. 20sec. 1 Nos
1199.00 19" 42U high Amplifier Rack, 800mm depth, made of Aluminium channels with side and rear panels made of M.S. Louvered side Panels and finished to 1199
the architects requirement.
The front door shall be made of toughened glass with MS Lockable door. 4 fans shall be provided at the top for Ventilation. Side Panels shall be Ventilated
Type. The Rack shall be powder coated to Siemens Grey colour as per IS-5. All spare U shall be covered with blank panels.The Rack shall have all
necessary trays, holes, nuts and bolts required for Mounting Amplifiers, Music Sources, Controllers, Telephone Interface Unit, Auto Dialer and any other 4 Nos
accessories needed for the system.
1200.00 Supply, Installation, Testing & Commissioning of PC Control GUI Software for automatic flight announcement system along with Client Workstation of Intel 1200
- Xenon E-5 Series, 8 Core or better, 8GB RAM, 500 GB HDD, DVD RW, 19" LED, Mouse, Keyboard or higher configuration with necessary software & 2 Nos
Hardware for complete, as per specification & approved make.
1201.00 Detailed design of PA System speaker layout with acoustic modeling, Testing of PA system as per specifications, Integration of Public Address System with 1201
fire alarm system with all
allied and implied items required for complete functioning of the system including all interconnections, terminations accessories in the control room. 1 LOT
Total Amount 0 0
AC FLIGHT INFORMATION DISPLAY SYSTEM (FIDS) AC
FIDS Servers, Software, Licences and Workstations, as detailed below
0 0
1202.00 Supply, Installation, Testing & Commissioning of FIDS Servers (installed in active-active mode in each of two data centres), core software, licenses 1202
1 Set
1203.00 Supply, Installation, Testing & Commissioning of Client Software for installation on AAI-provided PCs 1203 8 Nos
1204.00 FIDS Workstation PCs, with client software 1204 8 Nos
1205.00 Supply, Installation, Testing & Commissioning of 49" LCD Displays with Mounting Arrangement 1205 67 Nos
1206.00 Supply, Installation, Testing & Commissioning of 32" LCD Displays with Mounting Arrangement 1206 114 Nos
1207.00 Supply, Installation, Testing & Commissioning of 3x2 LED Board Displays with Mounting Arrangement 1207 6 Nos
1208.00 Supply, Installation, Testing & Commissioning of Server with accessories for Automatic Flight Announcement System (AFAS) 1208 2 Nos
1209.00 Supply, Installation, Testing & Commissioning of FIDS package Software as per requirement of the tender 1209 1 Lot
1210.00 Supply, Installation, Testing & Commissioning of AFAS package Software as per requirement of the tender 1210 1 Lot
1211.00 Integration with AODB and other systems as required 1211 Lum
1
Sum
1212.00 Charges for the installation, Integration, Testing and Commissioning of the complete System with necessary power distribution boards, power point boxes 1212
etc. as per specifications 1 Lot
1213.00 Charges for Training and documentation as per tender 1213 1 Lot
Total Amount 0 0
AG ACCESS CONTROL ALRAM MONITORING SYSTEM AG 0 0
1214.00 Supply, Installation, Testing & Commissioning of REQUEST-TO-EXIT MOTION DETECTOR, As Per technical Specification 1214 8 Nos
1215.00 Supply, Installation, Testing & Commissioning of ELECTRIFIED LOCKING DEVICE , As Per technical Specification 1215 60 Set
1216.00 Supply, Installation, Testing & Commissioning of CARD READER , As Per technical Specification 1216 100 Set
1217.00 Supply, Installation, Testing & Commissioning of OUTDOOR CARD READER , As Per technical Specification 1217 20 Set
1218.00 Supply, Installation, Testing & Commissioning of MAGNETIC DOOR CONTACT , As Per technical Specification 1218 60 Set
1219.00 Supply, Installation, Testing & Commissioning of Panic Button , As Per technical Specification 1219 40 Set
1220.00 Supply, Installation, Testing & Commissioning of INTERCOM SYSTEM STATION , As Per technical Specification 1220 10 Set
1221.00 Supply, Installation, Testing & Commissioning of Desktops with OS As Per technical Specification 1221 5 Nos
1222.00 Supply, Installation, Testing & Commissioning of Finger Print enrolment Scanner, As Per technical Specification 1222 3 Nos
1223.00 Supply, Installation, Testing & Commissioning of Multifunction Printers,As Per technical Specification 1223 2 Nos
1224.00 Supply, Installation, Testing & Commissioning of Laser Jet Network Printer, As Per technical Specification 1224 2 Nos
1225.00 Supply, Installation, Testing & Commissioning of AEC Smart Card personalization Printer,As Per technical Specification 1225 2 Nos
1226.00 Supply, Installation, Testing & Commissioning of AEC Encoder,As Per technical Specification 1226 2 Nos
1227.00 Supply, Installation, Testing & Commissioning of Smart cards,As Per technical Specification 1227 10000 Nos
1228.00 SITC of Enterprise level Access Control Servers (Database & Application),As Per technical Specification 1228 2 Nos
1229.00 Supply, Installation, Testing & Commissioning of Enterprise level Access Control Software,As Per technical Specification 1229 1 SET
1230.00 Supply, Installation, Testing & Commissioning of of ACS Client workstation,As Per technical Specification 1230 10 Nos
1231.00 Integration of ACS with other systems,As Per technical Specification 1231 1 LOT
1232.00 Supply, Installation, Testing & Commissioning of BCAS Smart cards,As Per technical Specification 1232 1500 LOT
1233.00 Supply, Installation, Testing & Commissioning of Vehicle RFID tags,As Per technical Specification 1233 1000 LOT
1234.00 Supply, Installation, Testing & Commissioning of RFID Registration Desktops 1234 3 Set
1235.00 Supply, Installation, Testing & Commissioning of RFID Web Cam,As Per technical Specification 1235 3 Set
1236.00 Development of software for Access Control & Alarm management,As Per technical Specification 1236 1 Set
1237.00 Customization & Integration with BCAS of software already developed,As Per technical Specification 1237 1 LOT
1238.00 SITC of Health Monitoring and Asset Management tool ,As Per technical Specification 1238 1 LOT
1239.00 Installation Accessories,As Per Site requirment 1239 1 LOT
Total Amount 0 0
AD DISTRIBUTED ANTENNA SYSTEM AD 0 0
1240.00 SITC of RF passive Accessories 1240 1 LS
1241.00 Optical Fiber Cable and associated Active Accessories 1241 1 LS
1242.00 Installation Accessories 1242 1 LS
Total Amount 0 0
AE TRUNK MOBILE RADIO SYSTEM (TMRS) AE 0 0
1243.00 Antenna 1243
Supply, Installation, Testing & Commissioning of OMNI Antenna 2 dBi 1 Lot
1244.00 Antenna 1244
Supply, Installation, Testing & Commissioning of Panel Antenna, 10dBi 1 Lot
1245.00 Radio & Controller 1245
Supply, Installation, Testing & Commissioning of Radio Terminal Equipments (portable handsets, vehicle-mount mobiles and desk-top mount fixed
radios) to support Unified Communications - 1 Lot
Portable Handsets Radio - 120 Nos.
1 Job
Vehicle-Mount Mobiles Radio - 20 Nos.
Desk-Top Mount Fixed Radios - 10 Nos.
1246.00 Supply, Installation, Testing & Commissioning of Expansion of Digital Voice Recording system as necessary 1246 1 Ls
1247.00 Splitter/Coupler 1247 0 0
1247.01 Supply, Installation, Testing & Commissioning of 2way splitter 1247.01 1 Lot
1247.02 Supply, Installation, Testing & Commissioning of 3way splitter 1247.02 1 Lot
1247.03 Supply, Installation, Testing & Commissioning of 4way splitter 1247.03 1 Lot
1247.04 Supply, Installation, Testing & Commissioning of Coupler 5dB 1247.04 1 Lot
1247.05 Supply, Installation, Testing & Commissioning of Coupler 7dB 1247.05 1 Lot
1247.06 Supply, Installation, Testing & Commissioning of Coupler 10dB 1247.06 1 Lot
1247.07 Supply, Installation, Testing & Commissioning of Coupler 15dB 1247.07 1 Lot
1247.08 Supply, Installation, Testing & Commissioning of Coupler 20dB 1247.08 1 Lot
1248.00 Connector 1248 0 0
1248.01 Supply, Installation, Testing & Commissioning of Connector 1/2" N-Male 1248.01 1 Lot
1248.02 Supply, Installation, Testing & Commissioning of Connector 7/8" N-Male 1248.02 1 Lot
1248.03 Supply, Installation, Testing & Commissioning of Connector 1/2" DIN-Male 1248.03 1 Lot
1248.04 Supply, Installation, Testing & Commissioning of Connector 7/8" DIN-Male 1248.04 1 Lot
1248.05 Supply, Installation, Testing & Commissioning of 1m - 1/2" Jumper Cable - N-Male - N-Male 1248.05 1 Lot
1249.00 RF Cable 1249 0 0
1249.01 Supply, Installation, Testing & Commissioning of 1/2-inch Regular Cable, LSZH, Fire retardant 1249.01 1 Lot
1249.02 Supply, Installation, Testing & Commissioning of 7/8-inch General Feeder, LSZH, Fire retardant 1249.02 1 Lot
1250.00 Accessories 1250 0 0
1250.01 Supply & Installation of Saddle25 mm 1250.01 1 Lot
1250.02 Supply & Installation of Z clamp for Omni Antenna 1250.02 1 Lot
1250.03 Supply & Installation of Panel Antenna Clamp (L Type) 1250.03 1 Lot
1250.04 Supply & Installation of 10mm self Trihead screw 1'' 1250.04 1 Lot
1250.05 Supply & Installation of Gitti 1250.05 1 Lot
1250.06 Supply & Installation of Cable Ties 10 Inch 1250.06 1 Lot
1250.07 Supply & Installation of Weather Proof Kit 1250.07 1 Lot
Total Amount 0 0
AF STRUCTERED CABLING SYSTEM (SCS) AF 0 0
1251.00 Supply, Installation, Testing & Commissioning of Category 6A 4 pair UTP Cable 305m, 1251 747 Box
1252.00 Supply, Installation, Testing & Commissioning of Category 6A 24 Port Loaded Patch Panel 1252 150 Nos
1253.00 Supply, Installation, Testing & Commissioning of Category 6A Information Outlet for Field side 1253 3600 Nos
1254.00 Supply, Installation, Testing & Commissioning of Cat-6A Face Plate Singlex with Gl back Box 1254 3000 Nos
1255.00 Supply, Installation, Testing & Commissioning of Cat-6A Face Plate Duplex with Gl back Box 1255 600 Nos
1256.00 Supply, Installation, Testing & Commissioning of Category 6A UTP Patch Cord 1 Meter 1256 3600 Nos
1257.00 Supply, Installation, Testing & Commissioning of Category 6A UTP Patch cord 2 Meter 1257 2000 Nos
1258.00 Supply, Installation, Testing & Commissioning of Category 6A UTP Patch Cord 3 Meter 1258 1600 Nos
1259.00 Supplying and fixing of PVC Cable Manager finger duct type 1259 180 Nos
1260.00 Supply, Installation, Testing & Commissioning of Armored outdoor single mode fiber optic cable, 24 Core 1260 2000 Mtr
1261.00 Supply, Installation, Testing & Commissioning of Indoor single mode fiber optic cable, 24 Core 1261 7200 Mtr
1262.00 Supplying, laying, termination, testing & commissioning 6 Core multimode armoured Fibre Optic cable complete as required. 1262 1000 Mtr
1263.00 Supply, Installation, Testing & Commissioning of 48 LC Fiber Patch Panel Loaded with Splicing tray. Fibre adaptor plate with adpters 1263 27 Nos
1264.00 Supply, Installation, Testing & Commissioning of 288 LC Fiber Patch Panel Loaded with Splicing tray, Fiber adaptor plate with adapters 1264 3 Nos
1265.00 Supply, Installation, Testing & Commissioning of LC type Singlemode Fiber Pigtail 1265 2000 Nos
1266.00 Supply, Installation, Testing & Commissioning of LC to LC Fiber Patch Cord Singlemode 3Meter 1266 500 Nos
1267.00 Supply, Installation, Testing & Commissioning of LC to LC Fiber Patch Cord Singlemode 5Meter 1267 300 Nos
1268.00 SITC of 42RU, 800w x lOOOd, 19" Comms equipment rack with front 19" rails and dual 12-outlet PDUs, and mesh-screen front and rear lockable doors, 1268
ventilated top cover with cable glands 8 Nos
1269.00 SITC of 42RU, 600w x lOOOd, 19" Server equipment rack, with front and rear Adjustable 19" rails, and dual 12-outlet PDUs, and mesh-screen front and 1269
rear lockable doors, ventilated top cover with cable glands 9 Nos
1270.00 SITC of 15RU, 800w x lOOOd, 19" Comms equipment rack with front 19" rails and dual 12-outlet PDUs, and mesh-screen front and rear lockable doors, 1270
ventilated top cover with cable glands 27 Nos
Total Amount 0 0
AH Master Clock AH 0 0
1271.00 Supply, Installation, Testing & Commissioning of GPS Synchronized Master clock (1+1) redundant mode, As Per technical Specification - 2 Set 1271
Supply, Installation, Testing & Commissioning of 4” NTP slave clocks As Per technical Specification - 40 Nos.
Supply, Installation, Testing & Commissioning of 24 port POE gigabit Ethernet switch, AS Per technical Specification - 2 Nos.
Supply, Installation, Testing & Commissioning of Optical to copper media convertor, As Per technical Specification - 8 Nos.
Supply, Installation, Testing & Commissioning of Cat 6 cable, As Per technical Specification - 1200 Mtr.
Supply, Installation, Testing & Commissioning of 12 port UTP patch panel, As Per technical Specification - 4 Set
Supply, Installation, Testing & Commissioning of 24 port UTP patch panel, As Per technical Specification - 2 Set
Supply, Installation, Testing & Commissioning of Single mode Fiber patch cord (SC type), As Per technical Specification - 16 Nos.
Supply, Installation, Testing & Commissioning of POE Injector, As Per technical Specification - 4 Nos.
1 Job
Total Amount 0 0
AI ACTIVE NETWORK SYSTEM AI 0 0
1272.00 Supply, Installation, Testing & Commissioning of Core Switch : 24 * 10/100/1000 , 8 * 10G SFP+ Ports and 20 * 40G QSFP+ Ports populated with 8* 10G 1272
SR Tranceiver and 20 * 40G 300 meter Tranceiver,As Per technical Specification 2 Nos
1273.00 Supply, Installation, Testing & Commissioning of Internet Router,As Per technical Specification 1273 2 Nos
1274.00 Supply, Installation, Testing & Commissioning of Internet Firewall/ Load balancers,As Per technical Specification 1274 2 Nos
1275.00 Supply, Installation, Testing & Commissioning of 24 Port Rack Switch for Server management,24 * 10/100/1000 and 4 * 10G SFP+ ports , populated with 1275
2 * 10SR Tranceivers As Per technical Specification 2 Nos
1276.00 Supply, Installation, Testing & Commissioning of 24 Port MPLS Switch, 24 * 10/100/1000 and 4 * 10G SFP+ ports , populated with 2 * 10SR TranceiversAs 1276
Per technical Specification 2 Nos
1277.00 Supply, Installation, Testing & Commissioning of 24 Port Access Switch PoE,24 * 10/100/1000 and 4 * 10G SFP+ ports , populated with 2 * 10SR 1277
Tranceivers As Per technical Specification 75 Nos
1278.00 Supply, Installation, Testing & Commissioning of 48 Port Access Switch PoE 48 * 10/100/1000 and 4 * 10G SFP+ ports , populated with 2 * 10SR 1278
Tranceivers,As Per technical Specification 38 Nos
1279.00 Supply, Installation, Testing & Commissioning of A P Indoore,As Per technical Specification 1279 75 Nos
1280.00 Supply, Installation, Testing & Commissioning of Wireless Controller with License for 413 AP,s scaleable to 500 AP,s ,As Per technical Specification 1280
2 Nos
1281.00 Supply, Installation, Testing & Commissioning of NMS Licenses for 600 devices,As Per technical Specification 1281 1 Nos
1282.00 Supply, Installation, Testing & Commissioning of AAA Harware for 25K Device License ,As Per technical Specification 1282 2 Nos
1283.00 Supply, Installation, Testing & Commissioning of Server Farm Switch : 20 * 10G SFP+ Ports and 1 * 40G QSFP+ Ports populated with 16* 10G SR 1283
Tranceiver and 1 * 40G 300 meter Tranceiver,As Per technical Specification 2 Nos
1284.00 Supply, Installation, Testing & Commissioning of Distribution Switch 24 * 10G SFP+ Ports populated with 10* 10G SR Tranceiver ,As Per technical 1284
Specification 10 Nos
Total Amount 0 0
AJ EPABX - IP PBX Telephone System AJ 0 0
1285.00 Supply of Server based IPPBX (should support hot standby redundancy of Call Control Servers without disconnection of single call during switchover) with 1285
support upto 3000 lines with following features :- As Per technical Specification
300 IP Users ( Licenses)
48 Analog Users
1 Operator Console IP based along with PC
16 trunk port
2 PRI Trunk lines (30 Channel) Circuit with CLIP Facility 1 Set
One Number Scheme on all extensions
Parallel ringing on GSM as well as on desk phone
1286.00 Supply of 8 port Voice Mail System for Item No.1 with following features:- As Per technical Specification 1286
Voice Mail Boxes for all users
PC/Server for installing Voice Mail System to be provided by bidder 1 Set
Unified Messaging Solution for 100 users Instruments (As per annexure A of Technical Specifications)
1304.00 SITC of NTP Server ,As Per technical Specification 1304 1 Nos
1305.00 SITC of Domain Server ,As Per technical Specification 1305 1 Nos
1306.00 SITC of DHCP Server ,As Per technical Specification 1306 1 Nos
1307.00 SITC of Web Server ,As Per technical Specification 1307 1 Nos
1308.00 SITC of NMS Server ,As Per technical Specification 1308 1 Nos
1309.00 SITC of Anti Virus Server ,As Per technical Specification 1309 1 Nos
1310.00 SITC of 200TB Centerlized Network Storage for Users ,As Per technical Specification 1310 1 Nos
1311.00 SITC of Printer Server for Users ,As Per technical Specification 1311 1 Nos
1312.00 SITC of Thin client Server ,As Per technical Specification 1312 3 SET
1313.00 SITC of Thin client ,As Per technical Specification 1313 300 Nos
1314.00 SITC of Rodent Repellent System for Data Center.As Per technical Specification. 1314 1 LOT
Total Amount 0 0
AL Secondary Data Center System AL 0 0
1315.00 SITC of Server Rack with In-Row Cooling , As Per technical Specification- 3Nos QTY 1315 3 Set
1316.00 SITC of Rack Intelligent PDU , As Per technical Specification 1316 12 Nos
1317.00 SITC of Rack Air-Conditioning Unit , As Per technical Specification- 3NOS QTY 1317 3 Set
1318.00 SITC of Auto-Changeover - Timer Switch with for N+1 AC Operation , As Per technical Specification-1NOS QTY 1318 3 Set
1319.00 SITC of Fire Detection and Suppressant System with NOVEC1230 1319
- Multi Detect Sensors + FAP + Suppressant Nozzles for NOVEC1230., As Per technical Specification - 1SET 1 Set
1320.00 SITC of Biometric + Proxcard Based Access Controller 1320
- IP Connectivity Enabled
- Standalone Software for Remote Monitoring 3 Set
- Single Point Authentication for Both the Doors, As Per technical Specification
1322.00 SITC of NTP Server ,As Per technical Specification 1322 1 Nos
1323.00 SITC of Domain Server ,As Per technical Specification 1323 1 Nos
1324.00 SITC of DHCP Server ,As Per technical Specification 1324 1 Nos
1325.00 SITC of Web Server ,As Per technical Specification 1325 1 Nos
1326.00 SITC of NMS Server ,As Per technical Specification 1326 1 Nos
1327.00 SITC of Anti Virus Server ,As Per technical Specification 1327 1 Nos
1328.00 SITC of 200TB Centerlized Network Storage for Users ,As Per technical Specification 1328 1 Nos
1329.00 SITC of Printer Server for Users ,As Per technical Specification 1329 1 Nos
1330.00 SITC of Thin client Server ,As Per technical Specification 1330 3 SET
1331.00 SITC of Thin client ,As Per technical Specification 1331 300 Nos
1332.00 SITC of Rodent Repellent System for Data Center.As Per technical Specification. 1332 1 LOT
Total Amount 0 0
AA ALL INCLUSIVE COMREHESIVE MAINTENCE CONTRACT AA 0 0
1333.00 All inclusive Comprehensive Maintenance of all Lifts & Escalators after DLP as provided under the main contract including trouble shooting, preventive 1333
maintenance and breakdown maintenance etc. as required as per good engineering practice, recommendation of the manufacturer, instructions of
Engineer-in-Charge and as per terms and conditions specified (the response time in case of breakdown shall not be more than 8 hours).
0 0
1333.01 First year after DLP 1333.01 1 Per Year
1333.02 Second year after DLP 1333.02 1 Per Year
1333.03 Third year after DLP 1333.03 1 Per Year
1333.04 Fourth year after DLP 1333.04 1 Per Year
1333.05 Fifth year after DLP 1333.05 1 Per Year
1334.00 All inclusive Comprehensive Maintenance of all UPS after DLP as provided under the main contract including trouble shooting, preventive maintenance 1334
and breakdown maintenance etc. as required as per good engineering practice, recommendation of the manufacturer, instructions of Engineer-in-Charge
and as per terms and conditions specified (the response time in case of breakdown shall not be more than 8 hours).
0 0
1334.01 First year after DLP 1334.01 1 Per Year
1334.02 Second year after DLP 1334.02 1 Per Year
1334.03 Third year after DLP 1334.03 1 Per Year
1334.04 Fourth year after DLP 1334.04 1 Per Year
1334.05 Fifth year after DLP 1334.05 1 Per Year
1335.00 All inclusive Comprehensive Maintenance of all HVAC after DLP (Services of Chillers, Pumps, AHU through OEM only) as provided under the main contract 1335
including trouble shooting, preventive maintenance and breakdown maintenance etc. as required as per good engineering practice, recommendation of
the manufacturer, instructions of Engineer-in-Charge and as per terms and conditions specified (the response time in case of breakdown shall not be
more than 8 hours).
0 0
1335.01 First year after DLP 1335.01 1 Per Year
1335.02 Second year after DLP 1335.02 1 Per Year
1335.03 Third year after DLP 1335.03 1 Per Year
1335.04 Fourth year after DLP 1335.04 1 Per Year
1335.05 Fifth year after DLP 1335.05 1 Per Year
1336.00 All inclusive Comprehensive Maintenance of all Fire Alram System & Aspiration System after DLP as provided under the main contract including trouble 1336
shooting, preventive maintenance and breakdown maintenance etc. as required as per good engineering practice, recommendation of the manufacturer,
instructions of Engineer-in-Charge and as per terms and conditions specified (the response time in case of breakdown shall not be more than 8 hours).
0 0
1336.01 First year after DLP 1336.01 1 Per Year
1336.02 Second year after DLP 1336.02 1 Per Year
1336.03 Third year after DLP 1336.03 1 Per Year
1336.04 Fourth year after DLP 1336.04 1 Per Year
1336.05 Fifth year after DLP 1336.05 1 Per Year
1337.00 Manning, Operating & Maintaining the Sewage Treatment Plant complete in all respects, including all technical/non-technical manpower, consumables 1337
and disposal of treated effluent/solid sludge as per requirements, and its all comonents works as a whole and the various assets generated thereon
under this contract, including cost of collection, analysis, reporting ,monitoring and maintaining record of samples from the raw sewage daily collected at
least for one time a day from the entry and exit of the STP including required staff and consumables , chemicals like chlorine, polymer, salts etc.,
complete. as per proposed details by Vendor in approved format and training to Client representatives as per the guidelines/ requirements of the Client.
0 0
1337.01 First year after DLP 1337.01 1 Per Year
1337.02 Second year after DLP 1337.02 1 Per Year
1337.03 Third year after DLP 1337.03 1 Per Year
1337.04 Fourth year after DLP 1337.04 1 Per Year
1337.05 Fifth year after DLP 1337.05 1 Per Year
1338.00 All inclusive Comprehensive Maintenance of all SCCTV System after DLP as provided under the main contract including trouble shooting, preventive 1338
maintenance and breakdown maintenance etc. as required as per good engineering practice, recommendation of the manufacturer, instructions of
Engineer-in-Charge and as per terms and conditions specified (the response time in case of breakdown shall not be more than 8 hours).
0 0
1338.01 First year after DLP 1338.01 1 Per Year
1338.02 Second year after DLP 1338.02 1 Per Year
1338.03 Third year after DLP 1338.03 1 Per Year
1338.04 Fourth year after DLP 1338.04 1 Per Year
1338.05 Fifth year after DLP 1338.05 1 Per Year
1339.00 All inclusive Comprehensive Maintenance of all PAVA System after DLP as provided under the main contract including trouble shooting, preventive 1339
maintenance and breakdown maintenance etc. as required as per good engineering practice, recommendation of the manufacturer, instructions of
Engineer-in-Charge and as per terms and conditions specified (the response time in case of breakdown shall not be more than 8 hours).
0 0
1339.01 First year after DLP 1339.01 1 Per Year
1339.02 Second year after DLP 1339.02 1 Per Year
1339.03 Third year after DLP 1339.03 1 Per Year
1339.04 Fourth year after DLP 1339.04 1 Per Year
1339.05 Fifth year after DLP 1339.05 1 Per Year
1340.00 All inclusive Comprehensive Maintenance of all FID System after DLP as provided under the main contract including trouble shooting, preventive 1340
maintenance and breakdown maintenance etc. as required as per good engineering practice, recommendation of the manufacturer, instructions of
Engineer-in-Charge and as per terms and conditions specified (the response time in case of breakdown shall not be more than 8 hours).
0 0
1340.01 First year after DLP 1340.01 1 Per Year
1340.02 Second year after DLP 1340.02 1 Per Year
1340.03 Third year after DLP 1340.03 1 Per Year
1340.04 Fourth year after DLP 1340.04 1 Per Year
1340.05 Fifth year after DLP 1340.05 1 Per Year
1341.00 All inclusive Comprehensive Maintenance of all Access Control Alarm Monitoriing System (ACAM) after DLP as provided under the main contract 1341
including trouble shooting, preventive maintenance and breakdown maintenance etc. as required as per good engineering practice, recommendation of
the manufacturer, instructions of Engineer-in-Charge and as per terms and conditions specified (the response time in case of breakdown shall not be
more than 8 hours).
0 0
1341.01 First year after DLP 1341.01 1 Per Year
1341.02 Second year after DLP 1341.02 1 Per Year
1341.03 Third year after DLP 1341.03 1 Per Year
1341.04 Fourth year after DLP 1341.04 1 Per Year
1341.05 Fifth year after DLP 1341.05 1 Per Year
1342.00 All inclusive Comprehensive Maintenance of all Distributed Antenna System (DAS) after DLP as provided under the main contract including trouble 1342
shooting, preventive maintenance and breakdown maintenance etc. as required as per good engineering practice, recommendation of the manufacturer,
instructions of Engineer-in-Charge and as per terms and conditions specified (the response time in case of breakdown shall not be more than 8 hours).
0 0
1342.01 First year after DLP 1342.01 1 Per Year
1342.02 Second year after DLP 1342.02 1 Per Year
1342.03 Third year after DLP 1342.03 1 Per Year
1342.04 Fourth year after DLP 1342.04 1 Per Year
1342.05 Fifth year after DLP 1342.05 1 Per Year
1343.00 All inclusive Comprehensive Maintenance of all Trunk Mobile Radio System (TMRS) after DLP as provided under the main contract including trouble 1343
shooting, preventive maintenance and breakdown maintenance etc. as required as per good engineering practice, recommendation of the manufacturer,
instructions of Engineer-in-Charge and as per terms and conditions specified (the response time in case of breakdown shall not be more than 8 hours).
0 0
1343.01 First year after DLP 1343.01 1 Per Year
1343.02 Second year after DLP 1343.02 1 Per Year
1343.03 Third year after DLP 1343.03 1 Per Year
1343.04 Fourth year after DLP 1343.04 1 Per Year
1343.05 Fifth year after DLP 1343.05 1 Per Year
1344.00 All inclusive Comprehensive Maintenance of all Mater Clock System (MCS) after DLP as provided under the main contract including trouble shooting, 1344
preventive maintenance and breakdown maintenance etc. as required as per good engineering practice, recommendation of the manufacturer,
instructions of Engineer-in-Charge and as per terms and conditions specified (the response time in case of breakdown shall not be more than 8 hours).
0 0
1344.01 First year after DLP 1344.01 1 Per Year
1344.02 Second year after DLP 1344.02 1 Per Year
1344.03 Third year after DLP 1344.03 1 Per Year
1344.04 Fourth year after DLP 1344.04 1 Per Year
1344.05 Fifth year after DLP 1344.05 1 Per Year
1345.00 All inclusive Comprehensive Maintenance of all Network Active System after DLP as provided under the main contract including trouble shooting, 1345
preventive maintenance and breakdown maintenance etc. as required as per good engineering practice, recommendation of the manufacturer,
instructions of Engineer-in-Charge and as per terms and conditions specified (the response time in case of breakdown shall not be more than 8 hours).
0 0
1345.01 First year after DLP 1345.01 1 Per Year
1345.02 Second year after DLP 1345.02 1 Per Year
1345.03 Third year after DLP 1345.03 1 Per Year
1345.04 Fourth year after DLP 1345.04 1 Per Year
1345.05 Fifth year after DLP 1345.05 1 Per Year
1346.00 All inclusive Comprehensive Maintenance of all IPPBX System after DLP as provided under the main contract including trouble shooting, preventive 1346
maintenance and breakdown maintenance etc. as required as per good engineering practice, recommendation of the manufacturer, instructions of
Engineer-in-Charge and as per terms and conditions specified (the response time in case of breakdown shall not be more than 8 hours).
0 0
1346.01 First year after DLP 1346.01 1 Per Year
1346.02 Second year after DLP 1346.02 1 Per Year
1346.03 Third year after DLP 1346.03 1 Per Year
1346.04 Fourth year after DLP 1346.04 1 Per Year
1346.05 Fifth year after DLP 1346.05 1 Per Year
1347.00 All inclusive Comprehensive Maintenance of all Data Center after DLP as provided under the main contract including trouble shooting, preventive 1347
maintenance and breakdown maintenance etc. as required as per good engineering practice, recommendation of the manufacturer, instructions of
Engineer-in-Charge and as per terms and conditions specified (the response time in case of breakdown shall not be more than 8 hours).
0 0
1347.01 First year after DLP 1347.01 1 Per Year
1347.02 Second year after DLP 1347.02 1 Per Year
1347.03 Third year after DLP 1347.03 1 Per Year
1347.04 Fourth year after DLP 1347.04 1 Per Year
1347.05 Fifth year after DLP 1347.05 1 Per Year
1348.00 All inclusive Comprehensive Maintenance of all Sliding Door after DLP as provided under the main contract including trouble shooting, preventive 1348
maintenance and breakdown maintenance etc. as required as per good engineering practice, recommendation of the manufacturer, instructions of
Engineer-in-Charge and as per terms and conditions specified (the response time in case of breakdown shall not be more than 8 hours).
0 0
1348.01 First year after DLP 1348.01 1 Per Year
1348.02 Second year after DLP 1348.02 1 Per Year
1348.03 Third year after DLP 1348.03 1 Per Year
1348.04 Fourth year after DLP 1348.04 1 Per Year
1348.05 Fifth year after DLP 1348.05 1 Per Year
0.00 TOTAL OPERATION AND COMPREHENSIVE MAINTENANCE 0 0
1350.00 Providing and supplying Structural Cement concrete of grade M-35 for cast in situ pier,pile cap,slab ..etc complete including cost of shuttering,but Item1350 10454.00 cum
excluding reinforcement as per drawing and Technical Specifications of MoRTH Sections 1500, 1700, 2100,2200,2300.
1351.00 Providing and supplying Structural Cement concrete of grade M-40 for cast in situ crash barrier,pedestals etc complete including cost of shuttering,but Item1351 638.00 cum
excluding reinforcement as per drawing and Technical Specifications of MoRTH Sections 1500, 1700, 2100,2200,2300.
1352.00 Providing and supplying Structural Cement concrete of grade M-45 for cast in situ portal beams etc complete including cost of shuttering,but excluding Item1352 4048.00 cum
reinforcement as per drawing and Technical Specifications of MoRTH Sections 1500, 1700, 2100,2200,2300.
Providing and supplying Structural Cement concrete of grade M-50 for cast in situ PSC box girder etc complete including cost of shuttering,but excluding
1353.00 reinforcement as per drawing and Technical Specifications of MoRTH Sections 1500, 1700, 2100,2200,2300. Item1353 493.00 cum
Pin Slide Guide Bearing-62.5 MT-Supplying, fitting/fixing in position true to line and level POT-PTFE bearing make Sanfield, Mageeba, Metco or approved
consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface
1354.00 sliding against stainless steel mating surface, completre assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as Item1354 72.00 Nos
per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete as per
drawing and approved technical specifications.
Pin fixed Bearing-40-247.5 MT-Supplying, fitting/fixing in position true to line and level POT-PTFE bearing make Sanfield, Mageeba, Metco or approved
consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface
1355.00 sliding against stainless steel mating surface, completre assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as Item1355 73.00 Nos
per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete as per
drawing and approved technical specifications.
Pin fixed Bearing-100-325 MT-Supplying, fitting/fixing in position true to line and level POT-PTFE bearing make Sanfield, Mageeba, Metco or approved
consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface
1356.00 sliding against stainless steel mating surface, completre assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as Item1356 1.00 Nos
per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete as per
drawing and approved technical specifications.
Pin Slide Guide Bearing-185 MT-Supplying, fitting/fixing in position true to line and level POT-PTFE bearing make Sanfield, Mageeba, Metco or approved
consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface
1357.00 sliding against stainless steel mating surface, completre assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as Item1357 1.00 Nos
per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete as per
drawing and approved technical specifications.
Free float bearing-600 MT-Supplying, fitting/fixing in position true to line and level POT-PTFE bearing make Sanfield, Mageeba, Metco or approved
consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface
1358.00 sliding against stainless steel mating surface, completre assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as Item1358 4.00 Nos
per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete as per
drawing and approved technical specifications.
Providing and fixing strip seal type expansion joint system with stud type anchorge capable of accommodating movement up to 80mm gap, complete as
1359.00 per approved drawings and standard MoRTH technical specifications section 2600 to be installed by the manufacturer/supplier or their authorised Item1359 1452.00 Rmt
representative ensuring compliance to the manufacturer's instructions for installation.
1360.00 Providing, supplying ,designing, of RE wall panels system with all necessary accessories like geostraps,Geomega connectors,EPDM pads,lifing Item1360 4327 Sqm
anchors,Non-woven geotextile,etc as per MoRTH Technical specifications section 3100
Providing and applying 2.5 mm thick road marking strips ( retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/semi
1361.00 automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by Item1361 2500 Sqm
experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil,grease and foreign material
etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
1 2 3 4
Additional Civil Works
Providing and supplying Structural Cement concrete of grade M-35 for pre-cast girders ,crash barrier and RE wall panels complete
1349 including cost of shuttering,manufacturing in precasting yard, storage, transportation, erection but excluding reinforcement as per 4800.00 cum
drawing and Technical Specifications of MoRTH Sections 1500, 1700, 2100,2200,2300.
1350
Providing and supplying Structural Cement concrete of grade M-35 for cast in situ pier,pile cap,slab ..etc complete including cost of 10454.00 cum
shuttering,but excluding reinforcement as per drawing and Technical Specifications of MoRTH Sections 1500, 1700, 2100,2200,2300.
1351 Providing and supplying Structural Cement concrete of grade M-40 for cast in situ crash barrier,pedestals etc complete including cost of 638.00 cum
shuttering,but excluding reinforcement as per drawing and Technical Specifications of MoRTH Sections 1500, 1700, 2100,2200,2300.
1352 Providing and supplying Structural Cement concrete of grade M-45 for cast in situ portal beams etc complete including cost of 4048.00 cum
shuttering,but excluding reinforcement as per drawing and Technical Specifications of MoRTH Sections 1500, 1700, 2100,2200,2300.
Providing and supplying Structural Cement concrete of grade M-50 for cast in situ PSC box girder etc complete including cost of shuttering,but
1353 493.00 cum
excluding reinforcement as per drawing and Technical Specifications of MoRTH Sections 1500, 1700, 2100,2200,2300.
Pin Slide Guide Bearing-62.5 MT-Supplying, fitting/fixing in position true to line and level POT-PTFE bearing make Sanfield, Mageeba,
Metco or approved consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing
1354 rings, dust seals, PTFE surface sliding against stainless steel mating surface, completre assembly to be of cast steel/fabricated structural 72.00 Nos
steel, metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2
and clause 2006 of MoRTH Specifications complete as per drawing and approved technical specifications.
Pin fixed Bearing-40-247.5 MT-Supplying, fitting/fixing in position true to line and level POT-PTFE bearing make Sanfield, Mageeba, Metco
or approved consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings,
1355 dust seals, PTFE surface sliding against stainless steel mating surface, completre assembly to be of cast steel/fabricated structural steel, 73.00 Nos
metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and
clause 2006 of MoRTH Specifications complete as per drawing and approved technical specifications.
Pin fixed Bearing-100-325 MT-Supplying, fitting/fixing in position true to line and level POT-PTFE bearing make Sanfield, Mageeba, Metco
or approved consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings,
1356 dust seals, PTFE surface sliding against stainless steel mating surface, completre assembly to be of cast steel/fabricated structural steel, 1.00 Nos
metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and
clause 2006 of MoRTH Specifications complete as per drawing and approved technical specifications.
SOQ- 390 ]
ITEM NO DESCRIPTION OF ITEM QUANTITY UNIT
1 2 3 4
Pin Slide Guide Bearing-185 MT-Supplying, fitting/fixing in position true to line and level POT-PTFE bearing make Sanfield, Mageeba,
Metco or approved consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing
1357 rings, dust seals, PTFE surface sliding against stainless steel mating surface, completre assembly to be of cast steel/fabricated structural 1.00 Nos
steel, metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2
and clause 2006 of MoRTH Specifications complete as per drawing and approved technical specifications.
Free float bearing-600 MT-Supplying, fitting/fixing in position true to line and level POT-PTFE bearing make Sanfield, Mageeba, Metco or
approved consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust
1358 seals, PTFE surface sliding against stainless steel mating surface, completre assembly to be of cast steel/fabricated structural steel, metal 4.00 Nos
and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause
2006 of MoRTH Specifications complete as per drawing and approved technical specifications.
Providing and fixing strip seal type expansion joint system with stud type anchorge capable of accommodating movement up to 80mm gap, complete as per
1359 approved drawings and standard MoRTH technical specifications section 2600 to be installed by the manufacturer/supplier or their authorised representative 1452.00 Rmt
ensuring compliance to the manufacturer's instructions for installation.
1360 Providing, supplying ,designing, of RE wall panels system with all necessary accessories like geostraps,Geomega connectors,EPDM pads,lifing anchors,Non- 4327 Sqm
woven geotextile,etc as per MoRTH Technical specifications section 3100
SOQ- 391 ]
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm
on plan) including dressing of sides and ramming of bottoms, lift upto 1.5, including getting out the excavated soil and disposal of surplus excavated soil as directed ,
2 with in AAI premises. 9400.00 cum
All kinds of soil
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by
3 ramming and watering, lead with in AAI permise sand lift upto 1.5 m. 112446.00 cum
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
4 All kinds of soil 346171.00 cum
5 Supplying and filling in plinth with fine sand in pile foundations and under floors, including watering, ramming, consolidating and dressing complete. 15038.00 cum
Open timbering over areas including strutting, shoring etc. complete.
6 (Measurements to be taken of the face area timbered). 20264.00 sqm
Depth upto 9.50 m
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated
7 earth with in AAI permises and lift upto 1.5 m, as directed by Engineer-in-Charge. 30000.00 sqm
All kinds of soil.
Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
Along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300 mm including
8 excavation channel along the wall & rodding etc. complete: 9930.00 metre
With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
Treatment of soil under floors using chemical emulsion @ one liter per hole, 300 mm apart including drilling 12 mm diameter holes :
9 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration 76210.00 sqm
Supplying chemical emulsion in sealed containers including delivery as specified.
10 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% 129614.00 liter
Providing & laying of Filter Media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRTH specifications to
11 a thickness of not less than 600 mm. 2122.00 CUM
Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods,watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, and rolling
12 every 3rd and topmost layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks,marginal banks, and guide banks etc., lead 1 CUM
upto 50 m and lift upto 1.5 m.
Note :- The contractor shall make necessary arrangement for dewatering (as per site requirment and to maintain the progress) of sub-soil water, drain water, rain water
or of any kind, at their own cost for smooth execution and proper implementation of any above items required for completion of entire project. Nothing extra shall be
payable on account of excution of work in or under water and / or liquid mud, including pumping out of water as required at site.
SOQ - 1
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant
and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement
concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering and shuttering including cost of curing,
admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per
18 direction of the Engineer-in-charge. 9375.00 cum
Note : 1) Excess/less cement used than specified in this item is payable/ recoverable separately..
All works Above plinth level in M-10 grade plain cement concrete (cement content considered @ 220 kg/cum)
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry
19 brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top 1948.00 sqm
smooth.
Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, cover, plain window sills,
shelves, louvers, steps, stair cases, etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centering,
20 complete. 71.00 cum
1:1.5:3 (1 Cement : 1.5 coarse sand ( Zone III) : 3 graded stone aggregate 20 mm nominal size)
SOQ - 2
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Note :- The contractor shall make necessary arrangement for dewatering (as per site requirment and to maintain the progress) of sub-soil water, drain water, rain water
or of any kind, at their own cost for smooth execution and proper implementation of any above items required for completion of entire project. Nothing extra shall be
payable on account of excution of work in or under water and / or liquid mud, including pumping out of water as required at site.
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured
in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of
specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering and
reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/manufacturer's specifications/ approved design mix retard
setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.
23 (Note: Cement content considered in this item is 330 Kg/cum. Excess/less cement used as per design mix is payable /recoverable separately) 49255.00 cum
All works above plinth level upto floor V level .
SOQ - 3
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Steel reinforcement for R.C.C. work ready to use " cut and bend " rebars of approved make from factory/ workshop to construction site including placing in position and
binding with binding wire all complete .
27 Upto Plinth Level 14284893.00 Kg
Thermo-Mechanically Treated bars (Fe 500-D) or more
Steel reinforcement for R.C.C. work ready to use " cut and bend " rebars of approved make from factory/ workshop to construction site including placing in position and
binding with binding wire all complete .
28 Above Plinth Level 10622378.00 Kg
Thermo-Mechanically Treated bars (Fe 500-D) or more
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
29 Foundations, footings, bases of columns etc. for mass concrete. 40823.00 sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
30 Walls (any thickness) including attached pilasters buttresses , plinth and string courses etc 62259.00 sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
31 Suspended floors, roofs, landings, balconies and access platform. 85090.00 sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
32 Shelves (cast in situ) 600.00 sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
33 Lintels, beams, plinth beams, girders, bressumers and cantilevers. 147037.00 sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
34 Columns, Pillars, Piers, Abutments, Posts and Struts. 38965.00 sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
35 Stairs, (excluding landings) except spiral - staircases. 3875.00 sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
36 Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like. 1200.00 sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
37 Edges of slab and breaks in floors and walls under 20 cms wide 1200.00 metre
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
38 Weather shade, Chajjas, corbels etc., including edges. 600.00 sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
39 Extra for shuttering in circular work (20% of respective centering and shuttering items) 40000.00 sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
40 Vertical and horizontal fins individually or forming box louvers band, facias and eaves boars. 600.00 sqm
SOQ - 4
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
42 Suspended floors, roofs, columns , landings, balconies and access platform. with water proof ply 12 mm thick. 79500.00 sqm
Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure, such
as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for
swellable water stop tape shall be applied throughout the length of the joint @3.78 liter per 240 running meter. Over the primed surface swellable type water stop tape
43 shall be placed. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry 8805.00 metre
guaranteed for 5 years against any leakage.
Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded
aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to
floor /floor to wall expansion control system for various vertical location in load application areas that accommodates multi directional seismic movement without stress
to it’s components. System shall consist of metal profiles with a universal. aluminum base member designed to accommodate various project conditions and finish floor
treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by
utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions.
The Self – centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement
and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory
44 requirement all as per the manufactures design and as approved by Engineer -in- Charge . (Material shall confirm to ASTM 6063.) 1988.00 metre
Floor joint upto 150mm gap
Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be
of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an
Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping
down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces
45 mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063.) 1380.00 metre
Wall joint upto 150mm gap
SOQ - 5
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing Expansion joint filler board of approved barand of Dawn colour between expansion joints, thickness built up using 10mm specifically extruded high
performance sheet minimum density 28 kg per cum and compression strength 0.21 Kg./Sqm when tested as per ASTM D-3575 including using double sided adhesive SIL
tape (manufactured by Supreme Industries Ltd. or approved equivalent) of 25x25x2 mm at four places per Sqm to the casted surface to form the expansion joint filler
board will become one side of the shuttering while the expansion joint is being created, including cost of all materials, Transportation, cutting and placing to the required
47 size, labour charges, sundries, wastage etc.at all levels complete as per drawings and as per direction of Engineer-in-Charge. 2386.00 sqm
150mm thick
Supplying and applying pre tested and approved water based concrete curing compound to concrete/ masonry surface, all as per manufacturer’s specification and
48 direction of Engineer-in-charge.( Not to be applied for shutter finish concrete surface) 300450.00 sqm
Non Pigmented wet curing compound
49 Add or deduct for using extra cement in the items of design mix over and above the specified cement content therein 200.00 quintal
50 Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof. 200.00 cum
Providing and fixing parallel threaded couplers conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement -
Specification”, to reinforcement bars including threading, enlargement at connection by forging, protecting the prepared reinforcement bars and related operations as
51 required to complete the works per direction of Engineer-in-Charge. 4137.00 each
Coupler for 16 mm diameter reinforcement bar
Providing and fixing parallel threaded couplers conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement -
Specification”, to reinforcement bars including threading, enlargement at connection by forging, protecting the prepared reinforcement bars and related operations as
52 required to complete the works per direction of Engineer-in-Charge. 12412.00 each
Coupler for 20 mm diameter reinforcement bar
Providing and fixing parallel threaded couplers conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement -
Specification”, to reinforcement bars including threading, enlargement at connection by forging, protecting the prepared reinforcement bars and related operations as
53 required to complete the works per direction of Engineer-in-Charge. 33102.00 each
Coupler for 25 mm diameter reinforcement bar
SOQ - 6
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing parallel threaded couplers conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement -
Specification”, to reinforcement bars including threading, enlargement at connection by forging, protecting the prepared reinforcement bars and related operations as
55 required to complete the works per direction of Engineer-in-Charge. 33102.00 each
Coupler for 32 mm diameter reinforcement bar
Providing and laying Reinforced cement concrete for construction of piers,abutments, portal frames, pier caps and bearing pedestals and seismic arresters over pier/
abutment caps at all locations with specified grade using Ordinary Portland Cement (conforming to strength requirement of IS:8112) including the cost of steel centering
and shuttering etc. complete including testing of materials etc. for casting pier & pier cap in one/two stage, necessary tools, plants, machinery and all related operations
as required to complete the work as per drawings and Specifications with all leads, lifts and depths true to level and position but excluding the cost of providing
reinforcement. Reinforcement shall be measured and paid separately. Note:- Cement content considered in this item is 480 Kg./Cum. Excess/ less cement used as per
56 design mix is payable/ recoverable 1.00 cum
separately.
Reinforced Cement Concrete -M-50
Note :- The contractor shall make necessary arrangement for dewatering (as per site requirment and to maintain the progress) of sub-soil water, drain water, rain water
or of any kind, at their own cost for smooth execution and proper implementation of any above items required for completion of entire project. Nothing extra shall be
payable on account of excution of work in or under water and / or liquid mud, including pumping out of water as required at site.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth including RCC band as required in
60 Cement mortar 1:4 (1 Cement : 4 coarse sand) 150.00 sqm
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level including RCC band as required up to
61 floor all level. 617.00 sqm
Cement mortar 1:4 (1 cement :4 coarse sand).
62 Extra for providing and placing including drilling where as requred in position 2 Nos. 6 mm dia M.S. bars at every third course of half brick masonry 879.00 sqm
SOQ - 7
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter
sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.
65 (Size-10x140mm) 5356.00 Each
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard
66 wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 2065.00 sqm
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side
67 of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.: 2142.00 sqm
1.5 mm thick
Providing and fixing in position single leaf fire check doors and frames at all levels of approved make ( navior, sukrti, iCLEAN ) , design, finish, tested and certified at CBRI,
Roorkee or equivalent as approved. complete in all respect as per specifications and direction of Engineer-In-Charge and consisting of :-
a) Pressed male door frames manufactured from 1.6mm(16gauge) thick galvanised steel sheet confirming to IS 277(2003) of double rebate profile of size
minimum( 143mm X 57 mm) finished with 'H' -primer
b)minimum 46mm thick G.I. fire check door of 120 minutes fire rating conforming to BS:476 part 22 & IS : 364 part II fabricated with 2 nos. 1.2mm thick(18 gauge)
galvanised sheet with infill of fire rated properitory insulation filler bonded to both faces of sheet with lock seam joints at style edges and internal reinforcement at top,
bottom and style edges and internal reinforcement at top bottom and style edges for fire rating .
c)The door frames and door shutters shall be primed with 'H' primer and finished with PU/Powder coated . The shutter would be mounted with SS Ball Bearing Hinges of
size 100mm x 75mm x 3.0mm of Becker Fire Solutions ( 4Nos per leaf ),appropriate openings for vision panel glass. Prototype Test certificate for a test carried out earlier
at CBRI Roorkee or as approved equivalent for fire rating of doors, shall be attached along with manufacturers test certificate.
d) All door shall be factory made including hardwares i.e. hinges, panic bar, door closer, lock, handles etc as desired with necessary reinforcement and direction of
Engineer in charge.
68 e) Minimum 5 mm thick Pyron /pyrobeck / Central/Saint Gobain Fire Rated Clear Non Wired Glass of 120 minutes rating one on each leaf of size 300 x 300mm. 98.00 sqm
Single Leaf Door with vision with a guaranteed of 120 minutes fire rating (Please note :- The contractor should give the guarantee bond of fire rating).
Note:- Surface area of shutter including door frame in elevation (one side Only) shall be measured for payment..
SOQ - 8
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing stainless steel (grade 304) tower bolts of Yale 254 /Dline-Carl - F / Hafele/ DORMA make or approved equivalent with necessary screws etc complete.
In stainless steel satin / polished finish
70 250 x10 mm 1064.00 Each
Providing and fixing stainless steel (grade 304) tower bolts of Yale 152 Dline-Carl - F / Hafele/ DORMA make or approved equivalent with necessary screws etc complete.
In stainless steel satin / polished finish
71 150x10 mm 1064.00 Each
Providing and fixing stainless steel (grade 304) tower bolts of Yale 100/ Dline-Carl - F / Hafele/ DORMA make or approved equivalent with necessary screws etc
complete.
72 In stainless steel satin / polished finish 105.00 Each
100x10 mm
Providing and fixing bright finished 100 mm mortise latch and lock with six levers in stainless steel satin finish and a pair of stainless steel lever handles of make Hafele
73 make (article no. 911.02.165, 916.96.006, 903.99.058) / Dorma (Pure 8100) /Yale make (article no. YTL-030+38P3+60MMDPSN-S) or approved equivalent make with 283.00 Each
necessary s.s. screws etc. complete as per direction of Engineer in charge.
Providing and fixing bright finished 100 mm mortise latch in stainless steel satin finish with one dead bolt and pair of stainless steel (grade 304) lever handles with
74 necessary s.s. screws etc. complete Hafele make (article no. 911.02.165, 916.96.006, 903.99.058) / Dorma (Pure 8100) /Yale make (article no. YTL- 109.00 Each
030+38P3+60MMDPSN-S) or approved equivalent make with necessary s.s. screws etc. complete as per direction of Engineer in charge.
SOQ - 9
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight
upto 36 kg to 80 kg and door width from 701 mm to 1100 mm), with double speed adjustment with necessary accessories and screws etc. complete. The manufacturer
76 certificate for Life cycle of the door closer has to be 500000 cycle tested certificate has to be submitted by agency) . Dorma(TS-68)/Hafele make (article no.DCR 1824 FR/ 1043.00 Each
Yale -931.84.659 or equivalent)
Providing and fixing wooden moulded beading to door and window frame with iron screws, plugs and priming coat on unexposed surface etc. complete.( 2nd class teak
77 wood) 4004.00 metre
50x20mm or 80x12.5mm as desired
Providing and fixing Toilet cubicles as under with door, pilaster and divider of 18mm thick board both side decorative compact laminate of required colour ,shade and
sizes as manufactured by Besco Merino or T Line or Greenlam Sturdo or equivalent as approved, including stainless steel accessories ( SS-304 grade) like square top
rail. Front panel and divider wall with stripe shoe touching floor (No gap shall be at bottom of divider/front panel except door), knob, thumb turn and indicator, twin coat
hook, door stopper, adjustable shoe, gravity hinges, and locking arrangement, SS channel etc as desired. all complete as per drawings. The cubical unit shall be installed
in approved finish, shades and colours as per specifications and direction of Engineer in charge. The cubical unit shall be minimum 10 years guarantee for the board
78 against any moisture and 5 years guarantee for the hardwares. 232.00 Each
L-shape toilet cubicles of size 900mm (width) X 1500mm (depth) X 2100mm (height) with door ,External Laminate finish = Metallic
Providing and fixing Toilet cubicles as under with door, pilaster and divider of 18mm thick board both side decorative compact laminate of required colour ,shade and
sizes as manufactured by Besco Merino or T Line or Greenlam Sturdo or equivalent as approved, including stainless steel accessories ( SS-304 grade) like square top
rail. Front panel and divider wall with stripe shoe touching floor (No gap shall be at bottom of divider/front panel except door), knob, thumb turn and indicator, twin coat
hook, door stopper, adjustable shoe, gravity hinges, and locking arrangement, SS channel etc as desired. all complete as per drawings. The cubical unit shall be installed
in approved finish, shades and colours as per specifications and direction of Engineer in charge. The cubical unit shall be minimum 5 years guarantee for the board
79 against any moisture and 5 years guarantee for the hardwares. 38.00 Each
I-shape toilet cubicles of size 900mm (width) X 1500mm (depth) X 2100mm (height) with door ,External Laminate finish = Metallic
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
80 2065.00 sqm
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) rectangular or
81 square: 1988.00 sqm
82 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).: 1320.00 sqm
Providing and fixing aluminum tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or
83 shade, with necessary screws etc. complete : 105.00 Each
250x10mm
Providing and fixing aluminum tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or
84 shade, with necessary screws etc. complete : 208.00 Each
150x10mm
SOQ - 10
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power
pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and
0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm center to center with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener
or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of
floor and ceiling channel and placed at a spacing of 610mm center to center by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush
to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm
long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. . The boards are to be fixed to the frame work with joints staggered to
avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to
86 the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at 350.00 sqm
corner (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all
complete.
75 mm overall thickness full height partition with 12.5 mm thick double skin fire rated gypsum board of approved make conforming to IS: 2095: part I
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.
87 125 mm 334.00 Nos
Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung
88 windows as per direction of Engineerin- charge complete. 104.00 Nos
355 X 19 mm
90 Providing and fixing ball bearing for rolling shutters. 52.00 Each
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be
91 measured).. 49.00 sqm
92 Extra for Providing mechanical device chain and cranks operation for operating rolling shutters exceeding 10 sqm and upto 16.80 sqm in the area 154.00 sqm
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural
93 steel etc. as required. 16785.00 Kg
In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
SOQ - 11
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works,including applying priming coat of
95 approved steel primer. 23241.00 Kg
M.S. tube .
Providing, Fabricating, Assembling, Painting, Hoisting and Erecting in position including detailing of Tubular Structure, Purlins/ rafters consisting of MS Steel
tubular/hollow sections including , ISI marked from TATA/ SAIL / RINL/ Jindal/ Apollo/ Hi Tech or as approved make, conforming to IS 1161/4923, Grade YST 310 and
Rolled section & plates conforming to IS 2062 (Grade YST 250) in the profile shaped as per approved drawings with special plate connector, pinion joints, Plates, hollow
sections etc. using SAW/MAW/MIG welding process, including transportation, cutting, threading, machining, all leads and lifts up to all heights, tools and plants and
necessary scaffolding etc. required for all operations involved.
The structural members shall be painted ( external surface only) with 320 DFT anti-corrosive protection coating using as approved make with first coat of primer barrier
Zep grey 60 microns thick, second coat with Penguard express MIO red 180 microns thick and final coat of polyurethane paint 80 microns thick (to be applied in two
coats) with hard top XP white of which first coat shall be at ground and second coat after erection including touch-up of damaged area of already painted surfaces if any,
upto all heights including preparation of surface with grit/sand blasting upto Sa 2.5 grade (at least) of the structural steel member and thorough cleaning of the surface
96 before application of primer/paint. 8622000.00 Kg
The item shall be executed as per approved drawings and direction of the Engineer-in-Charge complete. (Note: The work shall be executed as per manufacturer's
specifications wherever applicable, relevant code of practice and sound engineering practice).
(Please note that the quoted rate is inclusive of lifting as required by using cranes of adequate capicity and scaffolding or by any other means complete in all respects.)
Providing, Fabricating, Assembling, Hoisting and Erecting in position including detailing of Tubular Structure for façade/ other location as per drawing/ site requirement
work of MS Steel tubular/hollow sections including , ISI marked from TATA/ SAIL / RINL/ Jindal/ Apollo / Hi-tech or as approved make, conforming to IS 1161/4923,
Grade YST 310 and Rolled section & plates conforming to IS 2062 (Grade YST 250) in the profile shaped as per approved drawings with special plate connector, pinion
joints, Plates, hollow sections etc. using SAW/MAW/MIG welding process, including transportation, cutting, threading, machining, all leads and lifts up to all heights, tools
and plants and necessary scaffolding etc. required for all operations involved including applying a priming coat of approved steel primer etc.as required .
The item shall be executed as per approved drawings and direction of the Engineer-in-Charge complete. (Note: The work shall be executed as per manufacturer's
97 specifications wherever applicable, relevant code of practice and sound engineering practice). 1349498.00 Kg
(Please note that the quoted rate is inclusive of lifting as required by using cranes of adequate capacity and scaffolding or by any other means complete in all respects.)
Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, angle , MS plate, Placed along the walls, ceiling and floor in a grid
pattern with spacing as per drawing both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to
wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards
98 etc. Including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-charge. 7500.00 Kg
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junction and corners , all necessary fittings
99 complete, including applying a priming coat of approved steel primer. 100.00 sqm
Using M.S angles 40x40x6mm for diagonal braces.
SOQ - 12
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (1 Cement: 3 coarse sand) finished with a floating coat of neat cement.
104 18 mm thick 379.00 sqm
Providing and fixing glass strips in joints of terrazo/ cement concrete floors.
105 40 mm wide and 4 mm thick 14514.00 metre
Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including
106 rubbing polishing and groove complete with base of cement mortar 1 : 4 ( 1 cement : 4 coarse sand) : 5400.00 sqm
25 mm thick
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey
107 cement slurry mixed with pigment to match the shade of the slabs, including rubbing polishing and groove complete. 775.00 sqm
Epoxy Flooring
Surface Preparation Cleaning of surface free from dust. Dirt, moisture, oil & all foreign material from the floor. For floor cleaning all mechanized equipments are to be
used like scrubber, sanders, hot air blowers, vacuum cleaners, moisture test machine etc. Once cleaned, the surface is roughened to prepare the surface for application of
epoxy primer.
Levelling with self levelling epoxy screed Application of epoxy primer over prepared surface and then filling of cracks, crumbled joints small size damages in the epoxy
floor with epoxy mortar having high compressive strength. Epoxy primer should be applied at minimum 0.15kg/sqm . It should be so applied so as to acheve level of – 1
mm from adjoining top level of epoxy floor surface once the epoxy screed (minimum 1.0mm thick) applied.
The epoxy resin based solvent free primer should have surface drying time of <4 hours and should have minimum solid content of 40% & should be applied over uniform
concrete floor surface.
Epoxy Coating – Providing and applying high strength, high solid epoxy mortar surface. The epoxy mortar should be applied to minimum thickness of 1mm and should
108 have minimum hardness of 70-80, adhesive strength of >2Mpa(shall be applied as per manufacturer's specification). 1340.00 sqm
Providing and applying solvent free epoxy self levelling topping to give smooth, uniform, excellent broom/anti skid finish. Epoxy self levelling topping, should have
minimum tensile strength of >15 Mpa; floor traffic in 24 hours and should be applied to minimum thickness of 1mm, as per munufacturer's specification, complete as
directed. Contractor shall give 5 years guarantee for epoxy floor .
SOQ - 13
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and laying full body / homogenous/ double charge Vitrified tiles ( Polish / satin Finish/ anti skid) in floor with different sizes ( thickness to be specified by the
manufacturer),with water absorption less than 0.08% and confirming to IS; 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based
high polymer modified quick set tile adhesive ( water based ) conforming to IS; 15477 , in average 6mm thickness, including grouting of joints .( payment for grouching of
110 joints to be made separately) 16982.00 sqm
satin finish Vitrified Tile
Size of Tile 600 x 600 mm
Providing and laying full body / homogenous/ double charge Vitrified tiles ( Polish / satin Finish/ anti skid) in floor with different sizes ( thickness to be specified by the
manufacturer),with water absorption less than 0.08% and confirming to IS; 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based
high polymer modified quick set tile adhesive ( water based ) conforming to IS; 15477 , in average 6mm thickness, including grouting of joints .( payment for groughting of
111 joints to be made separately) 30494.00 sqm
satin finish Vitrified Tile
Size of Tile 800 x 800 mm
Providing and laying full body / homogenous/ double charge Vitrified tiles ( Polish / satin Finish/ anti skid) in floor with different sizes ( thickness to be specified by the
manufacturer),with water absorption less than 0.08% and confirming to IS; 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based
high polymer modified quick set tile adhesive ( water based ) conforming to IS; 15477 , in average 6mm thickness, including grouting of joints .( payment for groughting of
112 joints to be made separately) 28127.00 sqm
satin finish Vitrified Tile
Size of Tile 1000 x 1000 mm
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of
approved brand & manufacturer, in all colours and shade, in skirting, riser of steps,dado laid with cement based high polymer modified quick set tile adhesive (water
based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).
113 Polish finish vitrified tile 2693.00 sqm
Size of Tile 600 x 600 mm or 300x600mm
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of
approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, dado laid with cement based high polymer modified quick set tile adhesive (water
based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).
114 Polish finish vitrified tile 5662.00 sqm
Size of Tile 800 x 800 mm or 800x1200mm
SOQ - 14
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved
116 make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 833.00 sqm
3.30kg/sqm including pointing the joints with white cement and matching pigment etc., complete..
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades
except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1
117 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 2901.00 sqm
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS:
15622, of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar
118 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of 1969.00 sqm
Engineer-in-Charge.
Providing and fixing 18mm thick gangsaw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias and
similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with
white cement, mixed with matching pigment, epoxy touch ups, including rubbing,groove, curing moulding and polishing to edge to give high gloss finish etc. complete at
119 all levels.. 318.00 sqm
Granite of any colour and shade (Area of slab over 0.50 sqm)
Providing edge moulding to 18 mm thick marble/ granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per
120 design approved by Engineer-in-charge. 365.00 metre
Granite work
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ stone work including
121 necessary holes for pillar tabs etc including rubbing & polishing of cut edges etc complete 289.00 Each
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the
architectural drawings, laid over 15 mm (average) thick correction layer base of cement mortar 1:4 (1 cement: 4 coarse sand) followed by laying and fixing with high
polymer modified quick set adhesive of make Ferrouscrete / Pidilite/ Ardex Endura / MAPEI / MYK Laticrete or equivalent with average 6mm thickness and jointed with
122 cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including groove, rubbing, curing and polishing etc. all complete as 9246.00 sqm
specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent as approved.
Providing and fixing machine cut, mirror/ eggshell polished , granite stone work for wall lining (veneer work) , dado, skirting, risers of steps etc., in required design and
pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with
white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including groove ,rubbing, curing, polishing etc.
123 all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. 1538.00 sqm
18mm thick Granite in all shade / colour / size (Area of slab over 0.50 sqm) as approved by Engineer in charge.
SOQ - 15
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing machine cut, mirror/ eggshell polished , Engineered marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in
required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid
and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including groove, rubbing,
curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge.
125 18mm thick Engineered marble stone in all shade / colour / size (Area of slab over 0.50 sqm) as approved by Engineer in charge... 1538.00 sqm
Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade,
colour and texture in footpath, flooring in road side plazas, forecourt area, Kerb area and similar locations,laid over 15 mm (average) thick correction layer base of
cement mortar 1:4 (1 cement: 4 coarse sand) followed by laying and fixing with high polymer modified quick set adhesive of make Ferrouscrete / Pidilite/ Ardex
Endura / MAPEI / MYK Laticrete or equivalent with average 6mm thickness including grouting the joints with white cement mixed with matching pigment, epoxy touch
126 ups, groove etc. complete as per direction of Engineer-in-Charge. 1102.00 sqm
30mm thick Granite in all shade / colour / size (Area of slab over 0.50 sqm) as approved by Engineer in charge.
Extra for Flamed/Sand blasted/ Leather finish finishing in place of polished marble/granite stone as per approved by Engineer in charge., complete at all levels
127 771.00 sqm
Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian
marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm
thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including
pointing with white cement slurry admixed with pigment to match the marble shade including groove, rubbing, curing and polishing etc. all complete as specified and as
128 directed by the Engineer-in-Charge. 6030.00 sqm
18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Bottochino, Fire Red or Dark Emperadore or equivalent as approved etc.
Providing and fixing machine cut, mirror / eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required
design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1cement : 3 coarse sand) laid and
jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including groove,rubbing, curing,
polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge.
129 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Bottochino, Fire Red or Dark Emperadore or equivalent as approved etc. 58.00 sqm
Providing & fixing in position Phenol bonded Bamboo wood flooring with planks of sizes 14mm thick, 1800mm length (minimum) and 130 mm wide(minimum), in
approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring
shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded poly ethylene foam sheets having density 40kg/cum, over
prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The bomboowood planks
130 shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of Engineer in-charge. 2929.00 sqm
SOQ - 16
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing & fixing in position Phenol bonded Bamboo wood wall cladding at all height with planks of sizes 10mm thick, 1800mm length (minimum) and 130 mm wide
(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC),
with necessary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and
bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over backlayment of 1.00 mm thick expanded poly ethylene foam of
132 density 40kg/cum in two layers, first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The bomboowood planks shall have 330.00 sqm
minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of Engineer in-charge..
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on
waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white
133 cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the 3261.00 sqm
parapet walls in the same manner.
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand ( Zone III) : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but
134 excluding the cost of nosing of steps etc. complete. 934.00 sqm
40 mm thick with 20 mm nominal size stone aggregate
Providing and laying aluminum dust buster matting (whipping & scrapping -moisture & dirt recessed ) for main entry as per manufacturer specifictions and direction of
135 Engineer in charge. 126.00 sqm
Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to
structural steel frame work and / or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of
136 Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately).. 3004.00 sqm
Red sand stone - 30mm thick gang saw cut stone .
Providing and fixing dry cladding at all heights with 30mm thick gang saw cut stone as approved fixed to RCC/ Masonry surface with the help of stainless steel cramps of
required shape and size, pins etc. and sealing the joints with approved weather sealant including grouting the frame work/cramps/pins, maintaining the grooves in stone
slabs as per the drawing and filling the same with non-staining, non-streaking silicon joint sealants of approved make, including backer rod, drilling, anchoring, grouting,
scaffolding, edge polishing, groove,chamfering to received tapered stone and providing and applying coating on external surface of stone with solvent based silicone
sealant of approved make as per manufacturer's specifications etc., all complete as per architectural drawings and direction of Engineer in charge. (Only exposed surface
137 will be measured for payment. The stainless steel cramps and pins shall be paid for separately). 9461.00 sqm
30mm thick Granite in all shade / colour / size (Area of slab over 0.50 sqm) as approved by Engineer in charge.
SOQ - 17
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg
139 of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. 20278.00 sqm
600mm x 600mm tiles
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg
140 of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. 38615.00 sqm
800mm x 800mm tiles
Providing and applying silicone based water repellent over the sand stone/ granite stone cladding for all height confirming to BS: 6477-1984 including cleaning the
surface making it free from dirt, oil grease , wax and all other contamination using mechanical tool , wire brush , compressed air followed by water washing and as per
141 the manufacturer specification and driection of Engineer-in-charge.. 12216.00 sqm
Two or More coats .
Extra over and above C & C router design pattren for Dry sand stone cladding refer drawing no LKO-INT-08 with all respect as desired as per manufacturer specifications
142 and direction of Engineer in charge.( payment shall be paid of actual area of C & C router design pattren.) 3004.00 sqm
SOQ - 18
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Aluminum gutter:
Providing and fixing of 2 mm thick aluminum gutter with double side vulcanised rubber Expansion joints at every 12m length. Necessary down take spout with diameter
upto 150/300 mm at required intervals & other accessories like Cover plate, end caps, bracket for gutter support as desired spacing and welding at joints. The Girth of
144 gutter would be upto 4200mm. Dye Penetration test to be conducted wherever aluminum welding has been done complete job with all respect as per detailed drawings 1181.00 metre
and as per the direction of Engineer-in-charge.
SOQ - 19
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Roof Hatch :
Supply and fixing of Roof Hatch (Nystrom or equivalent as approved Make) of Aluminium Mill Finish.The specification are as under:
Leaf – Single Leaf
Opening Size – 914 x 914 mm
Material – Aluminium Cover & Frame in 11 Gauge (2.3mm thick)
Cover – Hollow 25mm, concealed with Fibreglass insulation, fully welded at all corners, internally reinforced for 40 psf live load
148 Curb – Height 305mm with integral cap flashing, 25mm Fibre Board Insulation, fully welded at all corners, mounting flange for securing hatch to roof. 2.00 each
EPDM Gasket – EPDM gasket fixed to the cover.
Hinge – Heavy duty Pintle Hinge with SS-316
Providing and fixing Lloyd Superdeck /LYSAGHT Ezydek or approved equivalent profile 1.2mm thick TCT colour coated galvanized steel having minimum 240-245MPa yield
strength as per IS 513 with a crest height of 44 to 51 at a pitch distance of 130 to 316mm c/c having a cover width of 760 to 960mm. The galvanization shall be minimum
275 gm per sqcm as per IS 277 with colour coating of polyester quality paint of 20 microns over the primer coat of 5 microns on the exposed side and 5 microns alkyde
149 coat over 5 microns primer coat on the inner side/ hot dipped zinc coating of 275 gm/sqcm on both sides confirming to AS 1397 and BS EN 10147:2000 complete the job 4729.00 sqm
with all respect as desired and as per the direction of Engineer-incharge..
SOQ - 20
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing GI Clip in Metal Ceiling System of 600x600/ 600x1200 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20 mm made of
0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier
of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip
and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to
the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C
carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive),fixing with clip in tiles into spring ‘T’ with
151 GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ 57886.00 sqm
sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns
(minimum), including factory painted after bending and perforation .
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with
zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at
1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle
hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm
running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of
10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm
long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to
wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @
230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including
jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound
152 in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of 18278.00 sqm
making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction
of the Engineer in Charge but excluding the cost of painting with
12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I
SOQ - 21
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance
(RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on
interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000
mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm
suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded
hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery
walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450
154 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with 2123.00 sqm
polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.
With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7)
SOQ - 22
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing U Baffle Aluminum panel ceiling as approved make ( Hunter Douglas , Durlum, SAS, Lindner, New Age ) of approved RAL colour consisting of panel
size 200 mm deep X 50 mm width using minimum 0.7 mm thick aluminum and 200mm center to center as per drawings enclosed , Pure Polyester Powder Coated,
Aluminum alloy AA 3105 (Al. Mg) for higher strength . Panels shall be connected using friction grip upper and lower bracket on a special carrier of 30 mm wide x 30 mm
high x 2 mm thick powder coated GI member as approved colour to form as cassette based on the module of 360mm c/c which shall be downward accessible with a
torsion springs/ or special bolted bracket hanger system in group of panel or as desired.
Main Runners: All vertical baffles are attached to factory punched 30x30x2.0mm Thk black Powder coated G.I member with the special baffle hangers/springs to form a
module of 200mm C/C.
Cross Runners: 30 mm wide x 30 mm high x 2 mm thick powder coated GI member as approved colour designed to interlock baffle section on designated spacing are
spaced at 1200mm Center maximum.
Suspension System : The complete frame to be suspended using special bracket with M6 threaded rod as desired length or as per detailed drawings .
Paint Finish: All baffles to be Pure Polyester Powder Coated to RAL Shades as confirmed/approved by Engineer-in-charge..
The panels shall be fixed to pre installed structural M.S.frame / RCC work at all levels including all accessories like Fasteners, Hangers, screws, washers, etc at site
156 complete with all respect as desired . conforming to specifications and directions of Engineer-in-Charge .Contractor shall give 10 years guarantee for entire system 1417.00 sqm
including Pure Polyester Powder Coating.
The Items includes supplying, Installation and fixing of U Baffle Aluminum panel ceiling over MS structural frame / RCC work, Labours, Scaffolding all required
machineries for fixing tools, Fasteners, Hangers, screws, washers, etc complete in all respect as desired. ( M.S. structurer shall be paid separately under relevant item )
SOQ - 23
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing U Baffle Aluminum panel ceiling as approved make ( Hunter Douglas , Durlum, SAS ,Lindner ) of approved RAL colour Finish consisting of panel size
500 mm deep X 100 mm width using minimum 1.2mm thick aluminum and 600mm center to center as per drawings enclosed , Pure Polyester Powder Coated,
Aluminum alloy AA 3105 (Al. Mg) for higher strength . Panels shall be connected using friction grip upper and lower bracket on a special carrier of 30 mm wide x 30 mm
high x 2 mm thick powder coated GI member as approved colour to form as cassette based on the module of 900c/c or as per manufacturer specifications, which shall
be downward accessible with a torsion springs/ or special bolted bracket hanger system in group of panel or as desired.
Main Runners: All vertical baffles are attached to factory punched 30x30x2.0mm thick black Powder coated G.I member with the special baffle hangers/springs to form a
module of 600mm C/C.
Cross Runners: 30 mm wide x 30 mm high x 2 mm thick powder coated GI member as approved colour designed to interlock baffle section on designated spacing are
spaced at 1200mm Center maximum.
Suspension System : The complete frame to be suspended using special bracket with M6 threaded rod as desired length or as per detailed drawings.
Paint Finish: All baffles to be Pure Polyester Powder Coated to RAL Shades as confirmed/approved by Engineer-in-charge.
158 The panels shall be fixed to pre installed structural M.S.frame/ RCC work at all levels including all accessories like Fasteners, Hangers, screws, washers, etc at site 26423.00 sqm
complete with all respect as desired . conforming to specifications and directions of Engineer-in-Charge.
The Items includes supplying, Installation and fixing of U Baffle Aluminum panel ceiling over MS structural frame / RCC work, Labours, Scaffolding all required
machineries for fixing tools, Fasteners, Hangers, screws, washers, etc complete in all respect as desired. ( M.S. structurer shall be paid separately under relevant item )
0.00
(SH: - 9.0 - FINISHING WORK) 0.00
SOQ - 24
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Painting with synthetic enamel paint ,having VOC ( Volatile Organic Compound ) content less than 150 gms/litre, of approved brand and manufacture, including applying
165 additional coats wherever required to achieve even shade colour. 1108.00 sqm
Two or more coats on new work
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation
166 of surface, etc. complete.( a) on steel work 446.00 sqm
Providing and finishing walls at all heights with textured exterior finish of following specifications:
i) One coat of priming coat of exterior primer @ 2.20 lit per 10 Sqm.
ii) Application of 2mm thick Texture materials of approved pattern/finish having a minimum specific gravity of 1.9kg / liter , solid contents in the range of 82-85%.
167 iii) Final coats (Two or more) of Exterior paint as approved and shade @3.28 liters/10sqm.all complete as per specifications and directions of Engineer-In-Charge.. 14719.00 sqm
Providing and applying white cement based putty average thickness 1mm minimum two coat ,of approved brand and manufacturer ,over the plastered wall surface to
168 prepare the surface even and smooth complete. 83325.00 sqm
Wall painting with premium acrylic emulsion paint of interior grade having VOC ( Volatile Organic Compound ) content less than 50grams/litre of approved brand and
169 manufacturer, including applying additional coats wherever required to achieve even shade colour. 131594.00 sqm
Two or more coats on new work
Finishing walls with Premium Acrylic Smooth exterior paint for all height with silicone additives of required shade : New work (Two or more coats applied @ 1.43 lit /10
170 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10sqm). 5457.00 sqm
Forming groove of uniform size from 12x12mm and upto 25x18mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer
171 including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the 394782.00 metre
Engineer-in-Charge.
Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content with water thinnable cement primer on
172 wall surface having VOC content less than 50grames/ litre. 131594.00 sqm
SOQ - 25
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other
sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e.
at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically
wherever required including cleat angle, aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and
the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately):
For Openable portion
178 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost 2082.00 Kg
of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).
Polyester powder coated aluminum (minimum thickness of polyester powder coating 50 micron).
SOQ - 26
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC/neoprene gasket, aluminum snap beading, aluminum channel etc.
complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading, channel shall be paid in basic item)
180 With toughened float glass panes of 12 mm thick 250.00 sqm
Filling the gap in between aluminum frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per
181 architectural drawings and direction of Engineer-in-charge complete. 54.00 metre
Upto 5mm depth and 5 mm width
Providing and fixing anodised aluminum (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work
182 for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required 14.00 kg
dia and size (Dash fastener to be paid for separately).
Providing and supplying aluminum extruded tubular and other aluminum sections as per the architectural drawings and approved shop drawings , the aluminum quality
as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved
183 by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminum frame work. Nothing 545985.00 Kg
extra shall be paid on this account).
SOQ - 27
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
31056.00 sqm
SOQ - 28
Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories
1. Performance Laboratory Test for Air Leakage Test (-50pa to –300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200
mVhr”.
2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml.”
3. Dynamic Water Penetration
NAME(50pa to 1500pa)
OF WORK as per AAMAOF501.01-
: CONSTRUCTION 05 testing method
NEW INTEGRATED for a range
PASSENGER upto 2000
TERMINAL ml” AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
BUILDING
4. Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any failure) as per ASTME-330-10 testing
method for a range upto 50 mm” REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test” Tests to be conducted on site
ITEM NO 6. Onsite Test for Water Leakage for a pressure range 50 kPa to 240 kPa (35psi)
DESCRIPTION OF ITEM
upto 2000ml” QUANTITY UNIT
1 2 3 4
31056.00 sqm
SOQ - 29
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified
and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including
186 necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and 250.00 sqm
as directed by the Engineer- in-Charge.
SOQ - 30
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
SOQ - 31
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Extra over and above C & C router design pattren for aluminum composite panel cladding refer drawing no-LKO-INT-06 with all respect as desired as per manufacturer
189 specifications and direction of Engineer in charge.( payment shall be paid of actual area of C & C router design pattren.) 4645.00 sqm
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature
(wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash
fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for
190 payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as fasteners etc.).. 38700.00 Kg
Providing and fixing 12 mm thick toughened glass for SS Railling of approved brand and manufacture, including SS fittings , necessary SS fixtures , making necessary holes
191 etc , all complete with all rspect as desired and direction of Engineer-in-charge . 1639.00 sqm
Providing and fixing 3M™ Scotchal electro cut Dusted /Crystal ( acid -etched look ) 7725SE-314/324 Graphic Film over the designated locations shown in the drawing in
192 any design, colour and pattern or as per the direction of the Engineer-In-Charge. 2656.00 sqm
Supply, installation, testing & commissioning of aluminum scaffolding eassy to assemble and dismantlable quick fit type mobile quick access platform Aardwolf model
no SER WN 234 make or as approved equivalent . The system shall be complete in all respect and direction of Engineer in-charge. System should include the following
193 items. 2.00 job
Telescopic cleaning pole 6m long - 1 no.
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring
194 type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and 350.00 sqm
stopper etc.to be paid separately).
SOQ - 32
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing, supplying and fixing of Frameless Swing Glass Door in glazing using 12mm thick toughened glass as approved make with aluminum rails of 65-100mm high
both at top and bottom as approved comprising of pivot with stainless steel cover including fixing of pivots floor springs, locks, handles etc. as desired complete with
all respects as per detailed drawings, manufacturers specifications and direction of Engineer in charge.
Single Leaf:- Swing Glass Door which includes one no. each of fittings such as EPF-712/PT24 - Top Pivot – 1 nos., EPF-724/ TP/TA - Top rail - 1nos., EPF-725 - Bottom rail
with lock and EPC – 1nos., Yale 'H' Pull Handle YEH-01A (600mm*32mm)/ DORMA TGDIH 600*32mm – 1 set , Floor spring ASSA ABLOY AF224P/ DORMA BTS 75V with
standard spindle conforming to EN 1154, tested for 500,000 cycles, non-handed unit suitable for doors up to 150 kg leaf weight, with variable spring strength (size EN 2-4)
and closing speed adjustment 145° -15° & 15°- 0°, fixed hold open at 90° and SS cover plate – 1set . The top/bottom rail shall be of 65-100mm height and 28-40mm thick
196 with SS cover on both sides complete. Featuring hydraulically fully controlled closing cycle including cement box, Finish : Satin Stainless Steel. The above work complete 250.00 sqm
in all respect as per approved drawings and to the satisfaction of Engineer-in-Charge .
single leaf door
Providing, supplying and fixing of Frameless Swing Glass Door in glazing using 12mm thick toughened glass as approved make with aluminum rails of 65-100mm high
both at top and bottom as approved comprising of pivot with stainless steel cover including fixing of pivots floor springs, locks, handles etc. as desired complete with
all respects as per detailed drawings, manufacturers specifications and direction of Engineer in charge.
Double Leaf:- Swing Glass Door which includes two no. each of fittings such as EPF-712/PT24 - Top Pivot – 2nos, EPF-724/TP/TA - Top door rail -2nos, EPF-725 - Bottom
door rail with lock and EPC 2 sets, Yale 'H' Pull Handle YEH-01A (600mm*32mm)/ DORMA TGDIH 600*32mm – 2 sets, Floor spring ASSA ABLOY AF224P/DORMA BTS 75V
with standard spindle conforming to EN 1154, tested for 500,000 cycles, non-handed unit suitable for doors up to 150 kg leaf weight, with variable spring strength (size
EN 2-4) and closing speed adjustment 145° -15° & 15°- 0°, fixed hold open at 90° and SS cover plate – 2sets. The top/bottom rail shall be of 65-100mm height and 28-
197 40mm thick with SS cover on both sides complete . Featuring hydraulically fully controlled closing cycle including cement box, Finish : Satin Stainless Steel. The above 250.00 sqm
work complete in all respect as per approved drawings and to the satisfaction of Engineer-in-Charge .
Double leaf door
Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI
sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having
density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing
in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter. The frame shall be finished with a
198 approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges 246.00 metre
is excluded).
SOQ - 33
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing non load bearing fixed frame for fire resistant glazed Partition for 120 min Fire Rating, made out to a profile of dimension 60mm x 70 mm of 1.6 mm
thick galvanised steel sheet as per test evidence suitable for fixing fire rated glass for 120 min of both integrity & radiation control (EW120) & minimum 20 min of
insulation (EI20).The profile has to be fixed to the supporting construction by means of anchor fasteners of size M10 x 80, every 150 mm from the edges and every 500
mm (approx) c/c. Linear meaurement of frame shall be measured for payment. The frame shall be filled with mineral wool insulation of density min 96kg/ m³. and
200 finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per NBC 2016 , is 16231 ( part-3) : 2016 and directions of 250.00 metre
Engineer - in- charge. .
Floor Mounted Trolley Fender : Fabrication, supply & installation of top mounted SS 304 grade floor mounted guard railing of Dorma/Ozone/ Rinox or Equivalent make
300 mm high as per drawing made of 38 x 1.5 mm thk. SS tube mounted with SS modular laser cut vertical of 54 x 12 mm thk. mounted on SS base plate of dia. 95 x 6
mm thk. fixed with the help of M8 CSK head anchors as per vendor detail. Vertical are spaced @ 1.5 mtr. regular intervals. All SS components are in SS 304 grade with
satin finish, made by using modern, automatic machines like CNC machine, laser cutting, water jets etc. The rate shall includes cost & conveyance of materials, base plate
screws, bolts, fabrication, any locking arrangements, transportation,cutting & making good the floor/walls, loading & unloading, handling of machineries all electrical
201 charges etc. labour charges , all leads and lift etc. complete as directed by engineer incharge. (Please note that no welding of SS pipes will be allowed and work shall be 4939.00 Metre
done by a specialized agency on modular and component basis).
Wall Mounted Trolley Fender : Fabrication, supply & installation of top mounted SS 304 grade wall mounted guard railing of Dorma/Ozone / Rinox / DLine or Equivalent
make as per drawing made of 38 x 1.5 mm thk. SS tube mounted with SS modular laser cut vertical of 54 x 12 mm thk. mounted on SS base plate of dia. 95 x 6 mm thk.
fixed with the help of M8 CSK head anchors as per vendor detail. Vertical are spaced @ 1.5 mtr. regular intervals. All SS components are in SS 304 grade with satin finish,
made by using modern, automatic machines like CNC machine, laser cutting, water jets etc. The rate shall includes cost & conveyance of materials, base plate screws,
bolts, fabrication, any locking arrangements, transportation,cutting & making good the floor/walls, loading & unloading, handling of machineries all electrical charges etc.
202 labour charges , all leads and lift etc. complete as directed by engineer incharge. (Please note that no welding of SS pipes will be allowed and work shall be done by a 4939.00 Metre
specialized agency on modular and component basis).
SOQ - 34
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
SOQ - 35
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing broom finish Stainless steel sheet ( 304 grade) Column / wall Cladding,skirting refer drawing made out of 1.2mm thick Stainless steel sheet of
207 extruded sections, fixing with frame ,screws, rubber beading (for holding screws ) etc. complete with all respect as desired as per drawing and manufacturers 267.00 sqm
specifications and direction of Engineer in charge.( payment shall be paid of actual area of cladding.)
SOQ - 36
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing ,supply & fixing 1.5mm thick self adhesive membrane with cross laminated HDPE, Bituthene CP Grace / Proofex GP Fosroc/ Colphene-3000 on horizontal
surface , Elongation ( ASTM D638 )- minimum 200%,Puncture resistance ( ASTM E154) minimum 200N, of approved make shall be fixed with leveling surface. The
membrane should be designed to be applied in elevated temperatures of 55 deg C and should confirm to BS 8102:2009. Adjacent sheet shall be laid in similar manner
with overlaps as per system requirement. The overlap joint shall be cleaned and sealed as per manufacturer's specification, sealing corners, pile heads, and drains etc. or
as desired side requirement and direction of Engineer in charge.
Note :-
209 (The all above operation excluding 25mm thcik CC 1:2:4 screed for protection layer before laying reinforement and concrete .) Contractor shall give 10 years guarantee 50905.00 sqm
for water proofings.The work shall be executed by authorized / manufacturer approved applicator.
Note : Material to be supplied with original manufacturer's Data sheet, Lable, MTC and Method statement. The client has right to inspect the manufacturing facility of the
original manufacturer.
Providing ,supply & fixing 1.5mm thick self adhesive membrane with cross laminated HDPE , approved makes Bituthene CP Grace / Proofex GP Fosroc / Colphene-3000
on vertical surface Thickness 1.5mm, Elongation ( ASTM D638 )- Mininmum 200%,Puncture resistance ( ASTM E154) minimum 200N, of approved make shall be fixed
with leveling surface. The membrane should be designed to be applied in elevated temperatures of 55 deg C and should confirm to BS 8102:2009.Adjacent sheet shall be
laid in similar manner with overlaps as per system requirement. The overlap joint shall be cleaned and sealed as per manufacturer's specification, sealing corners, pile
heads, and drains etc. or as desired side requirement and direction of Engineer in charge.
The Membrane shall be covered upto 300mm height above G.L and stuck the membrane into a groove cut into the concrete surface and seal the groove with a suitable
bitumastic or liquid sealant or mortar.
The laid membrane shall be covered with 25mm thick expended polystrene board @ 24kg/ cum density spot stuck to the membrene before backfilling.
(The rates will also include cost for chipping away any surplus concrete, surface preparation, cleaning, laying protection board etc, complete as directed by Engineer in
charge. )Contractor shall give 10 years guarantee for water proofing’s.The work shall be executed by authorized / manufacturer approved applicator.
210 Note : Material to be supplied with original manufacturer's Data sheet, Lable, MTC and Method statement. The client has right to inspect the manufacturing facility of the 21592.00 sqm
original manufacturer.
SOQ - 37
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting
of following operations: :
a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-
charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. :
b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water
proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed
with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm
height including rounding of junctions of walls and slabs.
c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645
and approved by Engineering-charge.
d) Finishing the surface with 20 mm thick joint less cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645
and approved by Engineering-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat
cement slurry and making pattern of 300x300 mm square 3 mm deep.
212 e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and 3229.00 sqm
as directed and specified by the Engineer-in-Charge :
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
Note :-
(The incase of any leakage if the injection grouting or any type processes required for stopping of leakage, the same shall be done by the Contractor free of cost with in
appropriate time to avoid further damages .If the contractor fails to rectify the defects well in time, the same will be done by AAI at risk and cost of the contractor.
SOQ - 38
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water
tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral
crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from
negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of
concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be
capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The
215 product performance shall carry guaranteed for 10 years against any leakage. 833.00 sqm
For horizontal surface one coat @1.10 kg per sqm.
Note : All water proofing work ,Contractor shall give 5 years guarantee for water proofings.
Note : All water proofing work ,Contractor shall give 5 years guarantee for water proofings. 0.00
0
(SH: - 12.0 -ROAD/ PAVEMENT WORKS) 0.00
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber
216 and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 meters. 55507.00 sqm
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material
by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power
217 roller to achieve the desired density, complete as per specifications and directions of Engineer in-Charge. 8757.00 cum
With material conforming to Grade-I (size range 75 mm to 0.075 mm ) having CBR Value-30
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the
material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and
218 compacting with vibratory roller of 8 to 10 tonne capacity to achieve gap the desired density, complete as per specifications and directions of Engineer-in-Charge. 11406.13 cum
Construction of dry lean cement concrete sub base over a prepared subgrade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not
exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement content not to be less than 150
Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant,
219 transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per direction of 7597.00 cum
Engineer-in charge.
SOQ - 39
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and laying in position polysulphide sealant of approved make conforming to BS-5212-1990 or IS 11433-1995, in expansion / Construction / dummy joints
including rounding of edges applying 2 coats of approved primer compatible with the brand of polysulphide and preparing the surface and applying masking tape along
the edge of joints to prevent accidental spillage of sealant on top surface and to give neat finish to the sealant and removing the masking tape after application of sealant
etc. complete as per direction of Engineer-in-Charge & particular specifications. [note : for purpose of payment, quantity (Length X Width X Depth) of sealant only will be
measured.]
i) Expansion joints of size 25 mm wide and 10 mm deep over 30mm dia. Closed-cell Polyethylene foam back-up rod, as per manufacturers specifications and sketch at
Appendix-'A'.
223 ii) Construction joints of size 10 mm wide and 10 mm deep over 12 mm dia Closed-cell Polyethylene foam back-up rod, as per manufacturers specifications and sketch at 11051250.00 cucm
Appendix-'A'.
iii) Dummy joints of size 10 mm wide and 10 mm deep over 12 mm dia. Closed-cell Polyethylene foam back-up rod, as per manufacturer's specifications and sketch at
Appendix-'A'.
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board
vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in charge.
225 (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately). 9004.00 cum
Painting road surface marking with adequate no. of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface/ PQC
226 in white / yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete. 7185.00 sqm
New work (Two or more coats)
SOQ - 40
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with
cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm),
including excavation ,making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured
228 for payment). 613.00 cum
(Precast C.C. kerb stone shall be approved by Engineer-in-charge).
Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal
229 size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete 1917.00 sqm
and as per direction of Engineer-in-charge.
Providing and laying 70mm thick factory made cement concrete grass grid pavers block of M -30 grade made by block making machine with strong vibratory compaction,
230 of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all 4396.00 sqm
complete as per the direction of Engineer-in-charge.
Providing and applying 2.5 mm thick road marking strips ( retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/semi
231
automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by 2500 Sqm
experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil,grease and foreign material etc.
complete as per direction of Engineer-in-charge and accordance with applicable specifications.
Free float bearing-155 MT-Supplying, fitting/fixing in position true to line and level POT-PTFE bearing make Sanfield, Mageeba, Metco or approved
consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding
232 against stainless steel mating surface, completre assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as per IRC: 83 604.00 each
part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete as per drawing and
approved technical specifications.
233
Providing and Fixing High tensile steel wires/strands including all accessories for pre-stressing system of make TATA, Freyssinet,Usha martin,VSL ,sanfield or 42.00 Ton
approved , stressing operations and grouting complete as per drawing and MoRTH Technical specifications.HTS in PSC Girders
Providing and laying Bitumen Penetration Macadam with hard stone aggregate of quality, size and grading as specified, with bitumen of suitable penetration grade,
including required key aggregate as specified, spreading coarse aggregate with the help of self propelled/tipper tail mounted aggregate spreador and applying bitumen by
a pressure distributor and then spreading key aggregate with the help of aggregate spreador complete including consolidation with road roller of 8 to 10 tonne capacity
234 to acheive specified value of compaction and surface accuracy. 17617.00 sqm
For 50 mm compacted thickness using coarse aggregate of size 50-20mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10 sqm.
With paving asphalt grade VG-10 @ 50 kg/10 sqm
SOQ - 41
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and applying tack coat using bitumen emulsion confirming to IS : 8887, using emulsion pressure distributer including preparing the surface & cleaning with
mechanical boom.
236 With rapid setting bitumen emulsion 4641.00 sqm
on W.B.M. / W.M.M. @ 0.4kg/sqm
Providing and appluing tack coat using bitumen emulsion confirming to IS : 8887, using emulsion pressure distributer including preparing the surface & cleaning with
mechanical boom.
237 With rapid setting bitumen emulsion 17617.00 sqm
on bitumen surface @ 0.25kg/Sqm
Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over
a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled vibratory
and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-charge.
238 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.5% (percentage by weight of total mix) prepared in Batch type Hot Mix Plant of 100 to 120 1.00 cum
TPH capacity.
Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transported
the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled
, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-charge.
239 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @2% ( percentage by weight of 1.00 cum
Aggregate)prepared in Batch type Hot Mix Plant of 100 to 120 TPH capacity.
Providing and laying Bituminous concrete using crushed stone aggregates of specified grading premixed with bituminous binder and filler, transporting the hot mix to site
by tippers, laying with power finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled vibratory and tandem
rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-charge.
240 40/50 mm compacted thickness with bitumen of grade VG-30 @5. 5% (percentage by weight of total mix) and lime filler @3% ( percentage by weight of 1.00 Cum
Aggregate)prepared in Batch type Hot Mix Plant of 100 to 120 TPH capacity.
Drainage Spouts in Superstructure including providing drip mouldings and also including supplying, fitting and fixing approved type of materials complete as per drawing
241 and Technical specification vide clause no. 2705 of MoRT&H’s Specification for Road & Bridge Works. 280.00 each
Providing, fixing, testing and commissioning of UPVC rain water pipes (IS : 4985-1983, 6.00 Kg/cm2 pressure rating) including injection moulded fittings (heavy duty)
242 (plain or door) e.g. bends, junction, cowls, tees, offsets, access pieces etc. Clamps/Supports jointing with rubber ring/solvent cement joints including cutting chase or 1680.00 meter
holes in walls and floors and making good as required at Site. 110mm dia pipe
SOQ - 42
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after
breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge
or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of
245 materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra 8256.13 Cum
earth to be paid for separately).
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 part of stacked volume of earth
after reduction by 20% :1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any
246 with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) 1931.00 each
Holes 120 cm dia , and 120 cm deep
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 part of stacked volume of earth
after reduction by 20% :1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any
247 with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) 17747.00 each
Holes 60 cm dia , and 60 cm deep
Supplying and stacking of Good earth at site including royalty and carriage with all lead and lifts, (earth measured in stacks will be reduced by 20% for payment).
248 39163.71 Cum
Supplying and stacking of cow dung manure/cattle manure at site including cost and carriage with all lead and lifts, (manure measured in stacks will be reduced by 8% of
249 payment) 5623.93 Cum
Supplying and spreading of fertilizer & pesticides at site of work
250 DAP 5426.53 Kg.
259 Removal of garden rubbish including building rubbish, earth with or / and mulba excavated by mechanial transport with all lead and lift. 300.00 per trip
Supplying of selection no-1 in turf form at site of work lush green, free from weeds with good and healthy i/c loading and un loading with all leads and lifts.
260 65843.00 per sqm
Preparation of mounds of various size and shape by available excavated /supplied earth in layers not exceeding 20 cm in depth, breaking clods,watering of each layer,
261 dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. 4378.80 Cum
SOQ - 43
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
0.00
TREE ( Stem height to be considered for height) 0.00
262 Anthecophalus cadamba having height of 10-12ft stright & sturdy branches big poly bag well developed. 50.00 Each
263 Azadirachta indica having height of 10-12ft stright & sturdy branches big poly bag well developed. 10.00 Each
264 Bombax Malabaricum having height of 10-12ft stright & sturdy branches big poly bag well developed. 10.00 Each
265 Bauhinia Blackie having height of 10-12ft stright & sturdy branches big poly bag well developed. 20.00 Each
266 Butea frondosa having height of 10-12ft stright & sturdy branches big poly bag well developed. 20.00 Each
267 Chukrasia Tabularis having height of 10-12ft stright & sturdy branches big poly bag well developed. 9.00 Each
268 Cassia Fistula having height of 10-12ft stright & sturdy branches big poly bag well developed. 250.00 Each
269 Chorisia speciosa having height of 10-12ft stright & sturdy branches big poly bag well developed. 25.00 Each
270 Callistemon lanceolatus having height of 10-12ft stright & sturdy branches big poly bag well developed. 19.00 Each
271 Dalbergia Sissoo having height of 10-12ft stright & sturdy branches big poly bag well developed. 22.00 Each
272 Delonix regia having height of 10-12ft stright & sturdy branches big poly bag well developed. 18.00 Each
273 Erythrina Indica having height of 10-12ft stright & sturdy branches big poly bag well developed. 21.00 Each
274 Ficus Lyrata having height of 4-6 ft stright & sturdy branches big poly bag well developed. 150.00 Each
275 Ficus virens having height of 10-12ft stright & sturdy branches big poly bag well developed. 125.00 Each
276 Ficus infectoria having height of 10-12ft stright & sturdy branches big poly bag well developed. 110.00 Each
277 Jacaranda mimosaefolia having height of 10-12ft stright & sturdy branches big poly bag well developed. 21.00 Each
278 Lagerstroemia speciosa having height of 10-12ft stright & sturdy branches big poly bag well developed. 19.00 Each
279 Lagerstroemia Floribunda having height of 10-12ft stright & sturdy branches big poly bag well developed. 47.00 Each
280 Mangifera Indica having height of 10-12ft stright & sturdy branches big poly bag well developed. 15.00 Each
281 Plumeria alba multi branched in height 6-8ft in poly bag well developed. 250.00 Each
282 Plumeria Acutifolia multi branched in height 6-8 ft in poly bag well developed. 140.00 Each
283 Salvadora oleoides having height of 10-12ft stright & sturdy branches big poly bag well developed. 16.00 Each
PALM ( Stem height to be considered for height) 0.00
284 Foxtail (palm) having height of 7-8 ft trunk with 60-70 leves well developed in big container pot bond condition. 15.00 Each
285 Fishtail (palm) having height of 6-8 ft trunk with 60-70 leves well developed in big container pot bond condition. 20.00 Each
286 Kentia palm having height of 8-10ft trunk with 60-70 leves well developed in big container pot bond condition. 15.00 Each
287 Phoenix sylvestrix (date palm) having height of 8-10ft trunk with 60-70 leves well developed in big container pot bond condition. 136.00 Each
288 Ptychosperma macarthurii having height of 8-10ft trunk with 60-70 leves well developed in big container pot bond condition. 162.00 Each
289 Roystonea Regia having height of 8-10ft trunk with 60-70 leves well developed in big container pot bond condition. 102.00 Each
290 Washingtonia filifera (palm) having height of 6-8ft trunk with 60-70 leves well developed in big container pot bond condition. 88.00 Each
291 Washingtonia Robusta (palm) having height of 6-8ft trunk with 60-70 leves well developed in big container pot bond condition. 26.00 Each
ORNAMENTAL PLANT
292 Areca palm ht of plants 90-120 cm with 60-70 leaves in in big size polybag well developed. 777.00 Each
293 Chamaedorea elegans ht of plants 90-120 cm with 60-70 leaves in in big size polybag well developed. 1365.00 Each
SOQ - 44
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
SOQ - 45
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
347 Supply of decorative pots (Yucaabe) 30" high , 30" dia (Basic Cost Rs.5000/-) 100.00 nos
348 Supply of decorative pots (Yucaabe) 48" high , 20" dia (Basic Cost Rs.7500/-) 100.00 nos
349 Supply of decorative pots (Yucaabe) 1200 dia (Basic Cost Rs.9900/-) 100.00 nos
Rocks Setting
Providing and laying of Rocks of different sizes ( 20% of total qty in 2400 mm to 3000 mm in length in one side, 30% of total qty in 1200 mm to 1500 mm and 50% of
350 total qty in 600 mm to 1000 mm one side ) brought from outside and to be set with mechanically or manual means in areas as per drawings or instruction of engg in 62.05 Ton
charge. The setting should meet approval of engineer in charge and architect. (Basic Cost Rs.3000/ ton)
Plantation of Trees & shrubs plant at site i/c watering and removal of unsaverieable material's as per direction of officer in charge (excluding cost of plant & water)
351 19678.00 Nos
Plantation of Ground Covers plant at site i/c watering and removal of unsaverieable material's as per direction of officer in charge (excluding cost of plant & water)
352 16236.00 Sqm
Maintenance Schedule
SOQ - 46
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Complete maintenance of garden with entire garden features in the garden area i.c lawn, trees, shrubs, hedge etc and removal of all weeds, watering mowing of lawn,
pruning of trees/shrubs, clipping of hedge/edge top dressing of in garden area with good earth & manure once/twice in a year , application of chemical fertilizer etc as
and when required nothing extra shall be paid on this account(excluding the cost of material which shall be supplied by the department or paid extra) all the above
operation done every month during maintenance period are as per direction of officer in charge. (M/o Period for 12
months)
Cutting of designer hedge/edge removing of cut materials, cleaning, hoeing of hedge/edge bed watering manuring and applying insecticdes and fungicides etc.
Topiary cutting/shaping of trees removing of cut materials, cleaning.
Complete maintenance of the entire garden feature in the garden area i.e. lawn trees, shrubs, hedge, flower beds, creepers etc. including hoeing, purning replacement of
plants, gap filling , watering , mowing , of lawn, clipping of hedge, removal of garden waste, applying insecticide, pesticide & fertilizer (wheenever required) top dressing
of lawn with good earth and manure and maintanance of other garden related works as directed by officer -in-charge (Note:- Good earth , manure, fertilizer, insecticide
pesticide etc. & All T&P articles & stock materials will be provided by the department.)
Weeding out of lawn by removal of all weeds and other wild growth with roots by forking including disposal of garden rubbish with all loads and lifts complete as per
direction and satisfaction of officer in charge of the work without top dressing. Each Per
354 23172.00 Month
Cutting of Hedge/Edge including removing of cut material along with removal of rubbish for lead upto 50m and lift upto 1.5m as per direction of officer incharge
(Excluding the cost of material which shall be provided by the Department).
Maintenance of trees
Trees up to 3 & 4 years
SOQ - 47
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Complete maintenance of garden with entire garden features in the garden area i.c lawn, trees, shrubs, hedge etc and removal of all weeds, watering mowing of lawn,
pruning of trees/shrubs, clipping of hedge/edge top dressing of in garden area with good earth & manure once/twice in a year , application of chemical fertilizer etc as
and when required nothing extra shall be paid on this account(excluding the cost of material which shall be supplied by the department or paid extra) all the above
operation done every month during maintenance period are as per direction of officer in charge. (M/o Period for 12
months)
Cutting of designer hedge/edge removing of cut materials, cleaning, hoeing of hedge/edge bed watering manuring and applying insecticdes and fungicides etc.
Topiary cutting/shaping of trees removing of cut materials, cleaning.
Complete maintenance of the entire garden feature in the garden area i.e. lawn trees, shrubs, hedge, flower beds, creepers etc. including hoeing, purning replacement of
plants, gap filling , watering , mowing , of lawn, clipping of hedge, removal of garden waste, applying insecticide, pesticide & fertilizer (wheenever required) top dressing
of lawn with good earth and manure and maintanance of other garden related works as directed by officer -in-charge (Note:- Good earth , manure, fertilizer, insecticide
pesticide etc. & All T&P articles & stock materials will be provided by the department.)
Weeding out of lawn by removal of all weeds and other wild growth with roots by forking including disposal of garden rubbish with all loads and lifts complete as per Per sqm/
356 direction and satisfaction of officer in charge of the work without top dressing. 194832.00 Per month
Cutting of Hedge/Edge including removing of cut material along with removal of rubbish for lead upto 50m and lift upto 1.5m as per direction of officer incharge
(Excluding the cost of material which shall be provided by the Department).
Maintenance of Ground covers
SOQ - 48
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and Fixing Concealed in wall Flushing Cistern with dual flush Actuator Plate (plastic body in approved finish), flush-stop function, noise less float valve and fast
filling action with all component parts of high quality including fixing frame and set complete in all respects as per direction of the engineer-in-charge
362 Make: (Kohler 77027IN-P-NA + 5413IN-P-CP), (Hindware Concealo), (Jaquar JCS-WHT-2400S) 245.00 Each
Providing and Fixing star white vitreous china wash basin for under counter mounting, specially fabricated brackets painted white and connection pipe to wall with C.P.
363 wall flange and rubber adopter for waste connection complete, including cutting and making good the walls wherever required 326.00 Each
Make: (Jaquar 2215IN-0), (Hindware Zen 10049), (Jaquar CNS-WHT-701)
Providing and Fixing vitreous china urinal with C.I. hangers, 15mm dia inlet to built in spreaders with inbuilt waste with C.P flange, complete including cutting and
364 making good the walls and floors wherever required 127.00 Each
Make: (Kohler Cat No: 5017IN-ER-0), (Hindware Senso art 60018), Jaquar URS-WHT-132530)
Providing and Fixing electrical/battery operated concealed automatic flushing system for urinals, including front S.S plate 125 x 125mm chrome sensor with CP brass
365 body, ball valve etc,complete in all respect including cutting and making good the walls wherever required 127.00 Each
Make: (Kohler 8791T-C01-CP), (Hindware 500964), Jaquar SNR-CHR-51097)
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of
appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
366 aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. 209.00 Sqm
Granite Stone of approved shade
Providing and fixing Janitor sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting
367 and making good the walls wherever required: 24.00 Each
White glazed fire clay Janitor sink of size 600x450x 250mm
Providing and Fixing stainless steel sink double bowl single drain board Size 1740x515 mm with C.I. brackets, 40mm C.P. waste,C.P. brass chain and rubber plug, CP Brass
Waste coupling and C.P. wall flange rubber adapter for waste connection complete including cutting and making good the walls wherever required.
368 Make: (NeelKanth Cat No: NK DBSD 12 G/M), (Jayna DBSD 02(DX) 5.00 Each
Providing and Fixing 15 mm nominal bore CP Brass short body bib cock complete including cutting and making good the walls wherever required.
369 Make: (Kohler Cat No:16093IN-4-CP), (Hindware Contessa F330041), (Jaquar FLR-CHR-5047N) 245.00 Each
Providing and Fixing 15 mm nominal bore CP Brass long body bib cock complete including cutting and making good the walls wherever required
370 Make: (Hindware Immacula F110002), (Jaquar CON-CHR-107KN), (CERA F2006152) 168.00 Each
SOQ - 49
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing SS liquid soap dispenser with push lever assembly with soap refill fixed in wall with Screws complete in all respect as per direction of the engineer-in-
373 charge 324.00 Each
Make: (Kohler Cat No:5487K-CP), (EURONICS ES-09), (Jaquar ACN-CHR-1137N)
Providing and fixing CP Brass Bottle Trap of approved quality & make and as per the direction of Engineering- charge
374 Make: (Kohler Cat No: 7314IN-CP), (Hindware F850015), (Jaquar ALD CHR-769L300X190) 487.00 Each
Providing and fixing C.P. brass angle valve quarter turn of approved quality conforming to IS:8931
375 15mm nominal bore 828.00 Each
Make: (Kohler Cat No: 80154IN-4-CP), (Hindware Cat No: F310003), (Jaquar FLR-CHR-5053N)
Providing and fixing Jumbo toilet paper holder including cutting and making good the walls wherever required
376 Make: (EURONICS Cat no: EJ01), (Dolphy make) 245.00 Each
Providing and fixing S.S. body tissue paper dispenser complete including cutting and making good the walls wherever required
377 Make: (Kohler Cat No: 5633IN-CP), (EURONICS EP 01), (UTEC UT-TVB 4000) 88.00 Each
Providing and fixing Health faucet with 1 metre long Flexible Tube and CP wall hook with PVC & SS Screws including cutting and making good the wall wherever required
378 complete as directed by the Engineer-in-charge 245.00 Each
Make: (Kohler Cat No:12927IN-CP), (Hindware "F160068"), (Jaquar ALD-CHR-577)
Providing and fixing C.P Single lever concealed diverter for bath and shower with Button at Top complete as directed by Engineer-in-charge
379 Make: (CERA F1014702 F4010103), (Hindware Divertor F850090 & F110042), (Jaquar ALD-CHR-065 & FLR-CHR-5065K) 5.00 Each
Providing and Fixing Shower Head:
380 Over head Rose shower with revolving joint (with body rotation) & 115 mm long shower arm complete as directed by Engineer-in-charge 5.00 Each
Make: (Kohler 16347IN-CP & 73037T-CL-CP), (Hindware F160039), (Jaquar SHA-CHR-477 & OHS-CHR-1709)
Providing and Fixing CP Bath spout with wall flange complete as directed by Engineer-in-charge
381 Make: (Kohler Cat No: 8160IN-CP), (Hindware Immacula Series F110023), (Jaquar SPJ-CHR-429) 5.00 Each
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
382 15 mm nominal bore 10.00 Each
Providing and Fixing CP Grab bar 600 mm long with SS Screws over Rawl plugs complete for Handicapped Toilet as directed by Engineer-in-charge
383 Make: (Kohler Cat No: 10701D-CP), (EURONICS EGR 01), (Jaquar AHS-CHR-1507) 30.00 Each
Providing and Fixing CP Hinged Arms (Sliding rail) for Handicapped Toilet with SS Screws over Rawl Plugs complete as per instructions of the engineer-in-charge
384 Make: (Jaquar SHA-1187N) 30.00 Each
Providing and Fixing straight / offset type flexible single body push fit type WC pan connector with inlet ring and integral single mould sealing fins made of flexible EVA
body to be fixed with manufacture supplied grease, including rubber bush / adaptor for use with C.I pipe as supplied with the pan connector complete as directed by
385 Engineer-in-charge 245.00 Each
Make: (Geberit make), (Viega make),
SOQ - 50
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing automatic sensor faucet for cold water, for wash basin complete in all respect including basin mounted auto tap, with infrared sensors with
solenoid valves for cold water with electronic circuit and necessary accessories including cutting and making good the walls and floors as per requirement and as per
388 approved manufacturer’s make or equivalent 326.00 Each
Make: (Kohler Cat No: 18057IN-ND-CP), (Hindware F240001), (Jaquar SNR-CHR-51021)
Providing and Fixing C.P brass Aerosol perfume dispenser, fixed to wooden cleats / Rawl Plug with C.P brass screws, complete including cutting and making good the
389 walls wherever required 245.00 Each
Make: (EURONICS EA-03), (UTEC UT-630)
Providing on Fixing 'C' Class heavy duty 200 mm dia Mild Steel pipes conforming to IS-3589 of thickness 6.3 mm including cutting, welding, nut-bolts, gasket, fitting viz.
bends, tees, reducers, crosses, flanges etc. and fixing the pipes on wall / ceiling / beam / floor with suitable MS clamps / structural supports/PCC block and painting two
391 coats of red oxide primer and two coats of synthetic enamel paint of approved shade complete as required and as specified. ( For terrace rain water system) 300.00 metre
Providing on Fixing 'C' Class heavy duty 250 mm dia Mild Steel pipes conforming to IS-3589 of thickness 6.3 mm including cutting, welding, nut-bolts, gasket, fitting viz.
bends, tees, reducers, crosses, flanges etc. and fixing the pipes on wall / ceiling / beam / floor with suitable MS clamps / structural supports/PCC block and painting two
392 coats of red oxide primer and two coats of synthetic enamel paint of approved shade complete as required and as specified. ( For terrace rain water system) 1660.00 metre
Providing on Fixing 'C' Class heavy duty 300 mm dia Mild Steel pipes conforming to IS-3589 of thickness 6.3 mm including cutting, welding, nut-bolts, gasket, fitting viz.
bends, tees, reducers, crosses, flanges etc. and fixing the pipes on wall / ceiling / beam / floor with suitable MS clamps / structural supports/PCC block and painting two
393 coats of red oxide primer and two coats of synthetic enamel paint of approved shade complete as required and as specified. ( For terrace rain water system) 1050.00 metre
394 Providing and Fixing 100 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 7146.00 metre
Providing and fixing 100mm dia. M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks
395 10X10X10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. 1500.00 Each
Providing and fixing 100mm dia Bend of required degree with access door for Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 ,
396 insertion rubber washer 3mm thick, bolts and nuts complete 245.00 Each
397 Providing and fixing 100mm dia Plain Bend of required degree for Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 245.00 Each
SOQ - 51
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
400 Providing and fixing 100mm dia door piece, insertion rubber washer 3 mm thick, bolts and nuts Centrifugally cast (spun) iron S&S IS: 3989 complete 130.00 Each
401 Providing and Fixing 100 mm dia Terminal guard for Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 125.00 Each
Providing and fixing shielded coupling for Hubless centrifugally
402 cast iron pipe 100 mm dia for SS 304 grade coupling with EPDM rubber gasket 3530.00 Each
Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter:
403 100mm 1250.00 Each
Providing and Fixing 100 mm inlet and 100 mm outlet for Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 of self cleansing design
404 with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. 503.00 Each
Providing and Fixing G.I. Reducing elbow of 100 x 50 mm in cement concrete 1:2:4 at all levels for floor drains (exlcuding cost of grating) for connection to floor traps in
405 sunken portions, complete as per drawings and as per approval of the engineer-in-charge. 152.00 Each
406 Providing and Fixing 32 mm dia G.I. pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc. 619.00 metre
407 Providing and Fixing 40 mm dia G.I. pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc. 217.00 metre
408 Providing and Fixing 50 mm dia G.I. pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc. 206.00 metre
409 Painting of 32 mm dia G.I. Pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality. 619.00 metre
410 Painting of 40 mm dia G.I. Pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality. 217.00 metre
411 Painting of 50 mm dia G.I. Pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality. 206.00 metre
Providing and fixing G.I. Inlet fittings with maximum 3 inlets 32,40 & 50 mm size fabricated from 100 mm dia G.I. pipes and welded G.I. sockets, fixed to C.I. Trap with lead
412 caulked joints and set in cement concrete(1:2:4) complete as directed by Engineer-in-charge. 503.00 Each
413 Providing and Fixing SS Grating with frame and SS Screws casted heavy 125 mm dia complete as directed by Engineer-in-charge. 655.00 Each
414 Providing and Fixing 250 mm dia Dome Grating for roof rain water pipe with all required accessories complete as directed by Engineer-in-charge. 45.00 Each
415 Providing and Fixing 300 mm dia Dome Grating for roof rain water pipe with all required accessories complete as directed by Engineer-in-charge. 35.00 Each
Providing and fixing 100 mm dia cast brass cleanout plug / floor cleanout with suitable insert keys for opening, male threaded joint with G.I. socket caulked to
416 spun soil pipe including cost of joint etc.complete as directed by Engineer-in-charge.. 225.00 Each
Providing and fixing 150 mm dia cast brass cleanout plug / floor cleanout with suitable insert keys for opening, male threaded joint with G.I. socket caulked to
417 spun soil pipe including cost of joint etc.complete as directed by Engineer-in-charge.. 22.00 Each
Providing and fixing 150 mm dia cast iron soil, waste and vent pipes as per IS:15905 (Hubless pipes) including all fittings with or without access of any degree i.e bends,
junctions, branches, end caps, reducers, cowls, offsets, access pieces, G.I. holder bats and clamps, stays, etc and jointing with stainless steel 304 couplings with EPDM
418 rubber gasket, including cutting holes in walls and floors and making good the same wherever required, all structural supports as per approved specifications, complete, 2260.00 metre
as per instructions of the Engineer-in-charge.
Providing & laying cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 stone aggregate 20mm and down gauge) 75mm in bed and pipe.
419 For 150, 100mm, 75mm and 50mm dia pipes under floor including centering & shuttering wherever required. 1222.00 metre
SOQ - 52
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including
getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming,
watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
421 All Kinds of Soil 5170.00 metre
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
Providing and fixing 25mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc. (internal work)
422 Exposed on wall 135.00 metre
Providing and fixing 32 mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc. (internal work)
423 Exposed on wall 80.00 metre
Providing and fixing 40 mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc. (internal work)
424 Exposed on wall 310.00 metre
Providing and fixing 50 mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc. (internal work)
425 Exposed on wall 490.00 metre
Providing and fixing 65 mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc. (internal work)
426 Exposed on wall 550.00 metre
Providing and fixing 80 mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc. (internal work)
427 Exposed on wall 190.00 metre
Providing and fixing 100 mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc. (internal work)
428 Exposed on wall 2885.00 metre
Providing and fixing 150 mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc. (internal work)
429 Exposed on wall 1320.00 metre
430 Providing and fixing 50 mm dia G.I pipes Class "C" complete with G.I fittings including trenching and refilling etc. (External work) 315.00 metre
431 Providing and fixing 65 mm dia G.I pipes Class "C" complete with G.I fittings including trenching and refilling etc. (External work) 260.00 metre
432 Providing and fixing 80 mm dia G.I pipes Class "C" complete with G.I fittings including trenching and refilling etc. (External work) 50.00 metre
433 Providing and fixing 100 mm dia G.I pipes Class "C" complete with G.I fittings including trenching and refilling etc. (External work) 930.00 metre
SOQ - 53
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing 20 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded
fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and
435 making good the same including testing of joints complete as per direction of Engineer in Charge. 1870.00 metre
Concealed work, including cutting chases and making good the walls etc.
Providing and fixing 25 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded
fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and
436 making good the same including testing of joints complete as per direction of Engineer in Charge. 790.00 metre
Concealed work, including cutting chases and making good the walls etc.
Providing and fixing 32 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded
fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and
437 making good the same including testing of joints complete as per direction of Engineer in Charge. 600.00 metre
Concealed work, including cutting chases and making good the walls etc.
Providing and fixing 40 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded
fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and
438 making good the same including testing of joints complete as per direction of Engineer in Charge. 1140.00 metre
Concealed work, including cutting chases and making good the walls etc.
Providing and fixing 50 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded
fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and
439 making good the same including testing of joints complete as per direction of Engineer in Charge. 410.00 metre
Concealed work, including cutting chases and making good the walls etc.
Providing and fixing 65 mm dia Chlorinated Polyvinyl Chloride (CPVC Schedule 40) pipes, having thermal stability for hot & cold water supply, including all CPVC plain &
brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of
440 cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 130.00 metre
Concealed work, including cutting chases and making good the walls etc.
Providing and fixing 22 mm od Stainless Steel pipes (Grade SS-316) confirming to JIS 3448 standard complete with Press Type fittings with SC-Contur in accordance with
DVGW regulation W534 such as sockets, bends, elbows, tees, reducers, unions, Flanges, clamps/structural steel supports,hangers etc. necessary adapters for GI to SS /
441 other metals and for connections to CP fittings, jointing, sundries,cutting holes in walls/floors/slabs & making good, complete in all respects. 110.00 metre
Providing and fixing 35 mm od Stainless Steel pipes (Grade SS-316) confirming to JIS 3448 standard complete with Press Type fittings with SC-Contur in accordance with
DVGW regulation W534 such as sockets, bends, elbows, tees, reducers, unions, Flanges, clamps/structural steel supports,hangers etc. necessary adapters for GI to SS /
442 other metals and for connections to CP fittings, jointing, sundries,cutting holes in walls/floors/slabs & making good, complete in all respects. 460.00 metre
SOQ - 54
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing 54 mm od Stainless Steel pipes (Grade SS-316) confirming to JIS 3448 standard complete with Press Type fittings with SC-Contur in accordance with
DVGW regulation W534 such as sockets, bends, elbows, tees, reducers, unions, Flanges, clamps/structural steel supports,hangers etc. necessary adapters for GI to SS /
444 other metals and for connections to CP fittings, jointing, sundries,cutting holes in walls/floors/slabs & making good, complete in all respects. 60.00 metre
Providing and fixing 75 mm od Stainless Steel pipes (Grade SS-316) confirming to JIS 3448 standard complete with Press Type fittings with SC-Contur in accordance with
DVGW regulation W534 such as sockets, bends, elbows, tees, reducers, unions, Flanges, clamps/structural steel supports,hangers etc. necessary adapters for GI to SS /
445 other metals and for connections to CP fittings, jointing, sundries,cutting holes in walls/floors/slabs & making good, complete in all respects. 110.00 metre
Providing and fixing 90 mm od Stainless Steel pipes (Grade SS-316) confirming to JIS 3448 standard complete with Press Type fittings with SC-Contur in accordance with
DVGW regulation W534 such as sockets, bends, elbows, tees, reducers, unions, Flanges, clamps/structural steel supports,hangers etc. necessary adapters for GI to SS /
446 other metals and for connections to CP fittings, jointing, sundries,cutting holes in walls/floors/slabs & making good, complete in all respects. 610.00 metre
Providing and laying S & S Centrifugaly Cast (Spun) / Ductile Iron Pipes conforming to IS :8329:
447 100 mm dia Ductile Iron Class K-9 pipes 890.00 metre
Providing and laying S & S Centrifugaly Cast (Spun) / Ductile Iron Pipes conforming to IS :8329:
448 150 mm dia Ductile Iron Class K-9 pipes 350.00 metre
Providing push-on-joints of 100 mm dia for Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket :
449 296.67 Joint
Providing push-on-joints of 150 mm dia for Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket :
450 116.67 Joint
Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523 :
451 Up to 600 mm dia 1.00 Quintal
452 Providing and fixing 25 mm dia G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work) 16.00 Each
453 Providing and fixing 32 mm dia G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work) 11.00 Each
454 Providing and fixing 40 mm dia G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work) 31.00 Each
455 Providing and fixing 50 mm dia G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work) 81.00 Each
456 Providing and fixing 65 mm dia G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work) 79.00 Each
457 Providing and fixing 80 mm dia G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work) 23.00 Each
458 Providing and fixing 100 mm dia G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work) 282.00 Each
459 Providing and fixing 150 mm dia G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work) 120.00 Each
460 Painting of 50 mm dia G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality 315.00 metre
461 Painting of 65 mm dia G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality 260.00 metre
462 Painting of 80 mm dia G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality 50.00 metre
463 Painting of 100 mm dia G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality 180.00 metre
SOQ - 55
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
472 Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in external work for 32 mm dia pipe 110.00 metre
473 Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in external work for 40 mm dia pipe 250.00 metre
474 Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in external work for 50 mm dia pipe 895.00 metre
475 Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in external work for 65 mm dia pipe 310.00 metre
476 Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in external work for 80 mm dia pipe 710.00 metre
477 Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in external work for 100 mm dia pipe 2360.00 metre
478 Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in external work for 150 mm dia pipe 450.00 metre
Providing and fixing 20 mm dia forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and
479 spindle with setting and gland of superior quality having minimum working pressure of 10 kg/cm2 etc. complete in all respect. 8.00 Each
Providing and fixing 25 mm dia forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and
480 spindle with setting and gland of superior quality having minimum working pressure of 10 kg/cm2 etc. complete in all respect. 96.00 Each
Providing and fixing 32 mm dia forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and
481 spindle with setting and gland of superior quality having minimum working pressure of 10 kg/cm2 etc. complete in all respect. 53.00 Each
Providing and fixing 40 mm dia forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and
482 spindle with setting and gland of superior quality having minimum working pressure of 10 kg/cm2 etc. complete in all respect. 42.00 Each
Providing and fixing 50 mm dia forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and
483 spindle with setting and gland of superior quality having minimum working pressure of 10 kg/cm2 etc. complete in all respect. 27.00 Each
Providing and fixing 65 mm dia C.I. butterfly valves of approved make , wafer end type class PN 1.6 as per I.S:13095 or with integrally moulded linear of nitrile or EPDM,
484 SS Disc and steam lever operated including necessary nuts, bolts, gaskets, flanges etc., complete as directed by Engineer-in-charge. 41.00 Each
Providing and fixing 80 mm dia C.I. butterfly valves of approved make , wafer end type class PN 1.6 as per I.S:13095 or with integrally moulded linear of nitrile or EPDM,
485 SS Disc and steam lever operated including necessary nuts, bolts, gaskets, flanges etc., complete as directed by Engineer-in-charge. 4.00 Each
SOQ - 56
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and Fixing 25 mm dia Pressure Reducing station for cold water supply comprising of 2 Nos. of brass ball valves on outlet and bye-pass and ball valve with inbuilt
strainers and a PRV (Diaphram type) unit with out going pressure gauge with flanged or union connection including safety valve. The complete system is tested to a
491 pressure not less than 15 Kg/Cm2 and suitable to reduce the pressure as per requirement including flanges/unions, nuts, bolts and washers complete as required for 9.00 Each
applications. (Horizontal or vertical as applicable).
Providing and Fixing 32 mm dia Pressure Reducing station for cold water supply comprising of 2 Nos. of brass ball valves on outlet and bye-pass and ball valve with inbuilt
strainers and a PRV (Diaphram type) unit with out going pressure gauge with flanged or union connection including safety valve. The complete system is tested to a
492 pressure not less than 15 Kg/Cm2 and suitable to reduce the pressure as per requirement including flanges/unions, nuts, bolts and washers complete as required for 10.00 Each
applications. (Horizontal or vertical as applicable).
Providing and Fixing 40 mm dia Pressure Reducing station for cold water supply comprising of 2 Nos. of brass ball valves on outlet and bye-pass and ball valve with inbuilt
strainers and a PRV (Diaphram type) unit with out going pressure gauge with flanged or union connection including safety valve. The complete system is tested to a
493 pressure not less than 15 Kg/Cm2 and suitable to reduce the pressure as per requirement including flanges/unions, nuts, bolts and washers complete as required for 24.00 Each
applications. (Horizontal or vertical as applicable).
Providing and Fixing 50 mm dia Pressure Reducing station for cold water supply comprising of 2 Nos. of brass ball valves on outlet and bye-pass and ball valve with inbuilt
strainers and a PRV (Diaphram type) unit with out going pressure gauge with flanged or union connection including safety valve. The complete system is tested to a
494 pressure not less than 15 Kg/Cm2 and suitable to reduce the pressure as per requirement including flanges/unions, nuts, bolts and washers complete as required for 11.00 Each
applications. (Horizontal or vertical as applicable).
Providing and Fixing 65 mm dia Pressure Reducing station for cold water supply comprising of 2 Nos. of brass ball valves on outlet and bye-pass and ball valve with inbuilt
strainers and a PRV (Diaphram type) unit with out going pressure gauge with flanged or union connection including safety valve. The complete system is tested to a
495 pressure not less than 15 Kg/Cm2 and suitable to reduce the pressure as per requirement including flanges/unions, nuts, bolts and washers complete as required for 2.00 Each
applications. (Horizontal or vertical as applicable).
Providing and Laying 25 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access pieces etc. jointing
496 with solvent cement complete. Rates includes any type of fittings required for the provision of Garden Hydrant point in main ring of the Hydrant pipe in different location 100.00 metre
complete in with trenching, refilling and testing of joints complete as per direction of the engineer in charge
Providing and Laying 32 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access pieces etc. jointing
497 with solvent cement complete. Rates includes any type of fittings required for the provision of Garden Hydrant point in main ring of the Hydrant pipe in different location 790.00 metre
complete in with trenching, refilling and testing of joints complete as per direction of the engineer in charge
SOQ - 57
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and Laying 50 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access pieces etc. jointing
499 with solvent cement complete. Rates includes any type of fittings required for the provision of Garden Hydrant point in main ring of the Hydrant pipe in different location 250.00 metre
complete in with trenching, refilling and testing of joints complete as per direction of the engineer in charge
Providing and Laying 63 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access pieces etc. jointing
500 with solvent cement complete. Rates includes any type of fittings required for the provision of Garden Hydrant point in main ring of the Hydrant pipe in different location 580.00 metre
complete in with trenching, refilling and testing of joints complete as per direction of the engineer in charge
Providing and Laying 75 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access pieces etc. jointing
501 with solvent cement complete. Rates includes any type of fittings required for the provision of Garden Hydrant point in main ring of the Hydrant pipe in different location 50.00 metre
complete in with trenching, refilling and testing of joints complete as per direction of the engineer in charge
Providing and Laying 90 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access pieces etc. jointing
502 with solvent cement complete. Rates includes any type of fittings required for the provision of Garden Hydrant point in main ring of the Hydrant pipe in different location 660.00 metre
complete in with trenching, refilling and testing of joints complete as per direction of the engineer in charge
Providing and Laying 110 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access pieces etc. jointing
503 with solvent cement complete. Rates includes any type of fittings required for the provision of Garden Hydrant point in main ring of the Hydrant pipe in different location 1290.00 metre
complete in with trenching, refilling and testing of joints complete as per direction of the engineer in charge
Providing and Laying 160 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access pieces etc. jointing
504 with solvent cement complete. Rates includes any type of fittings required for the provision of Garden Hydrant point in main ring of the Hydrant pipe in different location 100.00 metre
complete in with trenching, refilling and testing of joints complete as per direction of the engineer in charge
Constructing masonry chamber 30x30x50 cm with FPS bricks, inside with brick work in cement mortar 1:4 (1 cement : 4 Coarse sand) for stop cock, with C.I. surface
box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
necessary excavation foundation concrete 1:5:10 mix (1 cement : 5 fine sand and 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement
505 mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. 1.00 Each
With common burnt clay FPS (non modular) bricks of class designation 7.5
Constructing masonry Chamber 30x30x60 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for Garden hydrant, with DI manhole cover heavy duty
size 300x300mm (inside) with hinged cover & lifting arrangement fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone 150mm thick aggregate 40mm nominal size ) and inside
506 plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 54.00 Each
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top
diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20mm
nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with
cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :
507 1.00 Each
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
SOQ - 58
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top
diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with
cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
509 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 8.00 Each
Providing and fixing 15 mm dia thermal insulation over hot water pipes in chase having Japanese Red Oxide Primer Coat with 6mm thick Kaiflex, nitrile or approved
equivalent thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber having density of 60-90
510 Kg/m3 over pipes of following sizes including all required accessories complete as per Manufacture's specifications and finishing complete in all respect as directed by 20.00 Metre
Engineer-in-charge.
Providing and fixing 20 mm dia thermal insulation over hot water pipes in chase having Japanese Red Oxide Primer Coat with 6mm thick Kaiflex, nitrile or approved
equivalent thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber having density of 60-90
511 Kg/m3 over pipes of following sizes including all required accessories complete as per Manufacture's specifications and finishing complete in all respect as directed by 30.00 Metre
Engineer-in-charge.
Providing and fixing 25 mm dia thermal insulation over hot water pipes in chase having Japanese Red Oxide Primer Coat with 6mm thick Kaiflex, nitrile or approved
equivalent thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber having density of 60-90
512 Kg/m3 over pipes of following sizes including all required accessories complete as per Manufacture's specifications and finishing complete in all respect as directed by 20.00 Metre
Engineer-in-charge.
Providing and fixing 32 mm dia 750 mm long hot dipped G.I. Puddle flanges for water tanks as per I.S. 1239 (Class C) with 6mm thick M.S. Plate of suitable size and
513 welded alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all details in all respects and as per drawing. 2.00 Each
Providing and fixing 40 mm dia 750 mm long hot dipped G.I. Puddle flanges for water tanks as per I.S. 1239 (Class C) with 6mm thick M.S. Plate of suitable size and
514 welded alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all details in all respects and as per drawing. 2.00 Each
Providing and fixing 50 mm dia 750 mm long hot dipped G.I. Puddle flanges for water tanks as per I.S. 1239 (Class C) with 6mm thick M.S. Plate of suitable size and
515 welded alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all details in all respects and as per drawing. 3.00 Each
Providing and fixing 65 mm dia 750 mm long hot dipped G.I. Puddle flanges for water tanks as per I.S. 1239 (Class C) with 6mm thick M.S. Plate of suitable size and
516 welded alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all details in all respects and as per drawing. 5.00 Each
Providing and fixing 80 mm dia 750 mm long hot dipped G.I. Puddle flanges for water tanks as per I.S. 1239 (Class C) with 6mm thick M.S. Plate of suitable size and
517 welded alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all details in all respects and as per drawing. 10.00 Each
Providing and fixing 100 mm dia 750 mm long hot dipped G.I. Puddle flanges for water tanks as per I.S. 1239 (Class C) with 6mm thick M.S. Plate of suitable size and
518 welded alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all details in all respects and as per drawing. 2.00 Each
Providing and fixing 150 mm dia 750 mm long hot dipped G.I. Puddle flanges for water tanks as per I.S. 1239 (Class C) with 6mm thick M.S. Plate of suitable size and
519 welded alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all details in all respects and as per drawing. 2.00 Each
SOQ - 59
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing & fixing 100 mm dia butterfly valve (with motorized actuator) of rating PN 1.6, wafer type, in cast iron body with Ductile Iron disc, EPDM seal, SS single piece
shaft, conforming to IS-13095 of the following sizes complete with cast iron hand level companion flanges, bolts, nuts, washers & inserted rubber gaskets, as required and
as per enclosed specification, with single phase Electrical Actuator, of 15Nm- 400Nm Torque, made of aluminium alloy (resistant to heat, acid , alkali, corrosion), and
weather proof heavy duty motor, with stabilized start speed to effectively avoid water hammering, with waterproofing seal (IP 67) for all housing seals, low noise level,
522 built –in thermal protection complete as per approved type and specifications as per instructions of the engineer - in - charge. 5.00 Each
Providing and fixing 80 mm dia insect-proof coupling to vent pipes of underground tank/overhead tank with threaded or flanged joints, including M.S. flanges, nuts, bolts,
523 3mm thick rubber insertions complete. 5.00 Each
Providing, fixing and testing, double flanged 50 mm dia Water Flow Meter complete with digital display provision & including Pulse generator and Remote Totalizer
524 complete in all respect as per manufacturers specification, instructions and approval as per engineer incharge. 1.00 Each
Providing, fixing and testing, double flanged 65 mm dia Water Flow Meter complete with digital display provision & including Pulse generator and Remote Totalizer
525 complete in all respect as per manufacturers specification, instructions and approval as per engineer incharge. 8.00 Each
17: EXTERNAL SEWERAGE AND DRAINAGE SYSTEM 0.00
Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m, including
getting out the excavated soil, and then returning soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming,
watering etc. and disposing of surplus excavated soil as directed within a lead of 50 m.
526 All Kinds of Soil 1175.00 Metre
Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm
Extra for excavating trenches for pipes, cables, etc. in All Kinds soil exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depth upto
1.5 metre).
527 All Kinds of Soil 1320.00 Metre
Pipes, cables etc., exceeding 80mm dia but not exceeding 300mm dia
Extra for excavating trenches for pipes, cables, etc. in All Kinds soil exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depth upto
1.5 metre).
528 All Kinds of Soil 575.00 Metre
Pipes, cables etc., exceeding 300mm dia but not exceeding 600mm dia
Extra for excavating trenches for pipes, cables, etc. in All Kinds soils exceeding 3 m in depth but not exceeding 4.5 m. (Rate is over corresponding basic item for depth
upto 1.5 metre).
529 All Kinds of Soil 525.00 Metre
Pipes, cables etc., exceeding 300mm dia but not exceeding 600mm dia
SOQ - 60
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
SOQ - 61
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size
550 (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :: 5.00 Each
180 x 150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) with RCC Top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone
aggregate 20mm nominal size) foundation concrete 1:4:8 mix ( 1 cement :4 coarse sand: 8 graded stone aggregate 40 nominal size), inside plastering 12mm thick with
cement mortar 1:3 ( 1 cement : 3 coarse sand), finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design .
'Inside size 90x80 cms and 45cms deep including Ductile Iron cover( D.I.) and frame(Heavy duty) 610x455mm internal dimensions total weight of cover and frame to be
551 not less then 38 kg (wt. of cover 23 kg and weight of frame 15 kg) 47.00 Each
With common burnt clay FPS(non modular) bricks of class designation 7.5
Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) with RCC Top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone
aggregate 20mm nominal size) foundation concrete 1:4:8 mix ( 1 cement :4 coarse sand: 8 graded stone aggregate 40 nominal size), inside plastering 12mm thick with
cement mortar 1:3 ( 1 cement : 3 coarse sand), finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design .
'Inside size 120x90 cm and 90 cm deep including D.I. cover and frame(Heavy duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg
552 (weight of cover 58 kg and weight of frame 58 kg) : 12.00 Each
With common burnt clay FPS(non modular) bricks of class designation 7.5
553 Extra depth of manholes Size 90x80cms With FPS Bricks with class designation75 9.00 metre
554 Extra depth of manholes Size 120x90cms With FPS Bricks with class designation75 9.00 metre
Constructing Brick Masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 Coarse sand), inside cement
plaster 12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix ( 1 cement : 3 coarse
sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone aggregate
20mm nominal size) finished with a floating coat of neat cement all complete as per standard design. External surface shall be finished with 15mm thick cement plaster
1:6 ( 1 cement : 6 Coarse sand) as per side conditions.
0.91m deep with Ductile Iron cover( D.I.) and frame(Heavy duty) and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S:12592,
555 total weight of cover and frame to be not less than 182Kg. fixed in cement concrete 1:2:4 mix (1 Cement: 2 Coarse sand: 4 Graded stone aggregate 20mm nominal size) 40.00 Each
including centering, shuttering all complete.
With common burnt clay FPS(non modular) bricks of class designation 7.5
556 Extra depth for circular type Manhole 0.91 internal dia with F.P.S. Bricks class designation 75, depth beyond 0.91 m to 1.67 m 20.00 metre
SOQ - 62
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
558 Extra depth for Circular type Manhole 1.22 m internal dia (at Bottom) With F.P.S bricks class designation 75, Depth beyond 1.68 to 2.29 m. 8.00 metre
Constructing Brick Masonry circular manhole 1.52 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 Coarse sand), inside cement plaster
12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand : 6
graded stone aggregate 40 mm nominal size) and making necessary channel in Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20mm
nominal size) finished with a floating coat of neat cement all complete as per standard design .External surface shall be finished with 15mm thick cement plaster 1:6 ( 1
cement : 6 Coarse sand) as per side conditions.
2.30m deep with Ductile Iron cover( D.I.) and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S:12592, total weight of cover and
559 frame to be not less than 182Kg. fixed in cement concrete 1:2:4 mix (1cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) including centering, 44.00 Each
shuttering all complete.
With common burnt clay FPS(non modular) bricks of class designation 7.5
Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m :
560 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 22.00 metre
Providing & fixing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per I.S:10910 on 12 mm dia steel bar conforming to I.S:1786 having
minimum cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 165 mm space between protruded legs having 2mm
tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to
561 with stand the bend test and chemical resistance test as per specifications and having manufacturer's permanent identification mark to be visible even after fixing, 1050.00 Each
including fixing in manholes with 30x20x15cm cement concrete block 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) complete as per
design.
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C.
563 horizontal grating with frame complete as per standard design : 140.00 Each
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
SOQ - 63
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
566 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 1000.00 Kg
Providing and Fixiing medium duty, water tight double sealed Ductile iron 560 mm dia. Circular Manhole cover and frames specially casted for placing over the OH Water
567 tanks with lifting and locking arrangements as per approved sample, complete in all respect including fixing in PCC as per site Requirement . 1000.00 Kg
Providing and fixing M.S. grating and preferably in 600mm long pieces, fabricated with 16x16mm square bars, @ 20mm clear spacing and welded to angle iron
25x25x5mm and placed firmly on angle iron frame of 30x30x5mm with 25x3mm hold fasts approximately 75mm long welded at intervals of 500mm including two or
568 more coats of synthetic enamel paint of approved quality and shade over one coats of primer and set in cement mortar 1:3 (1 cement : 3 coarse sand) complete as 5000.00 Kg
per attached details for drain.
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818,
570 including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge For 200 mm nominal size dia 720.00 Metre
Supplying, assembling, lowering and fixing in vertical position in borewell unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including
571 hire &labour charges, ittings & accessories etc. all complete, for all depths, as per direction of Engineer-in charge. For 200mm nominal size dia 240.00 Metre
Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual
572 requirement, all complete as per direction of Engineerin- charge. 120.00 Cum
Development of Tubewell in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible
limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any
other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c
573 disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in- 320.00 Hour
charge.
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete
574 for borewell of 200 mm dia 8.00 Each
Providing and fixing 200 mm dia M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of
575 required size complete. 8.00 Each
576 Providing and fixing 200 mm dia Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 8.00 Each
0.00
SOQ - 64
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818,
578 including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge For 200 mm nominal size dia 2880.00 Metre
Supplying, assembling, lowering and fixing in vertical position in borewell 200 mm dia unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS:
579 12818, including hire &labour charges, ittings & accessories etc. all complete, for all depths, as per direction of Engineer-in charge. 960.00 Metre
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per
580 direction of Engineer-in-charge. 256.00 Cum
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads &
581 lifts, all complete as per direction of Engineer-incharge. 256.00 Cum
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as
582 per direction of Engineer -in-charge. 256.00 Cum
Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual
583 requirement, all complete as per direction of Engineerin- charge. 320.00 Cum
Providing and fixing factory made precast RCC perforated drain covers,having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm
584 dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with 64.00 Each
M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge.
Development of Rainy well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible
limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any
other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c
585 disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in- 1280.00 Hour
charge.
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete
586 for borewell of 200 mm dia 32.00 Each
Providing and fixing 200 mm dia M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of
587 required size complete. 32.00 Each
588 Providing and fixing 200 mm dia Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 32.00 Each
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
589 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size). 68.80 Cum
Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the
590 cost of required centering, shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm 150.40 Cum
nominal size).
591 12 mm cement plaster finished with a floating coat of neat cement : 1:3 (1 cement : 3 fine sand) 4160.00 Sqm
SOQ - 65
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
0.00
SUB-HEAD: 20: MISCELLANEOUS WORK:- 0.00
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1
593 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. 1694.00 sqm
Red Sand Stone
594 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. 820.00 metre
595 Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre. 874.00 sqm
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. per 50 kg
596 2500.00
cement
Demolishing R.C.C. work manually/ by mechanical means including cutting & stacking of steel bars and disposal of unserviceable material within AAI site
597 premises as per direction of Engineer - in- charge. 350.00 cum
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within AAI site premises as
598 per direction of Engineer-in-charge. 500.00 cum
In cement mortar
Providing and fixing 6mm thick bevelled edge mirror of superior glass of approved quality and approved make with VHP tap (3M) & 25mm dia stainless steel stud and
599 10mm brush finish stainless steel trims machine cut in required size and shape as approved shade colour etc complete at all levels as per detailed drawings and direction 505.00 sqm
of Engineer in Charge.
Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin
600 Polythene Bags fixed to wall with screw, rawl plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge 500.00 sqm
Providing and fixing counters (Reception ,Wash basin or other similar location) with 12 mm thick antibacterial anti fungal, boiling water resistant heat resistant, impact
resistant, insulative non conductive, stain resistant, scratch resistant, Green Guard certified Acrylic solid surface of approved make (LG Himac, Dupoint, Neonnex or
equivalent as approved) in approved colour and design, confirming to relevant standards, and having minimum Specific Gravity 1.65 g/cm3, fixed over MS supporting
structure with all mechanical fixtures as per manufacturer's specification and guideline, including fascia and back splash area as per approved drawings and design,
including fixing of solid acrylic surface over 12 mm thick (BWP) with suitable Low VOC adhesive, moulding of edges, buffing of surface, making of holes for plumbing
601 fixtures, flushing of joints, necessary hardware, silicon sealants, etc. all complete as per direction of Engineer In charge. The plan and elevation area (horizontal and 306.00 Sqm
vertical) excluding wash basin area will be measured for payment.
Extra over above item , for providing oval shaped wash basin of size 550 x 430 x200 mm in vanity counter, made of moulded surface of 12 mm thick Acrylic solid of same
602 specification as above, and in approved colour and design, all complete as per drawings, specification and direction of Engineer in charge 293.00 Each
SOQ - 66
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing wall cladding with 12 mm thick antibacterial anti fungal, boiling water resistant heat resistant, impact resistant, insulative non conductive, stain
resistant, scratch resistant, Green Guard certified Acrylic solid surface of approved make (LG Himac, Dupoint, Neonnex or equivalent as approved) in approved colour and
design, confirming to relevant standards, and having minimum Specific Gravity 1.65 g/cm3, fixed with aluminum frame over wall in true line and level, as per
604 manufacturer's specification , drawings and design, including suitable Low VOC adhesive, buffing of surface, making of holes for plumbing fixtures, flushing of joints, 1198.00 Sqm
necessary hardware, silicon sealants, etc. all complete as desired and direction of Engineer In charge. Note :-Only surface area of acrylic solid surface panel alongwith its
groove shall be measured for payment.
Extra over and above C & C router design pattern for Acrylic solid surface wall cladding refer drawing with all respect as desired as per manufacturer specifications and
605 direction of Engineer in charge.( payment shall be paid of actual area of C & C router design pattern.) 1198.00 sqm
Fabrication, Supply & Installation of SS Bollard as Approved make of Stainless Steel 304 grade Bollard , Height-900mm, Diameter – 114mm,thickness of bollard -2mm ,
606 Base plate dia –210mm, Fixed to floor with Chemical fasteners as per refer drawing LKO-INT-36/37 and manufacturer specifications complete with all respect as desired 147.00 each
and direction of Engineer in charge.
Providing, making and placing in position Check-in counters made up from 19mm thick block board covered with 1.00mm thick laminate of approved make/ shade
having hard wood base of specified section including fixing of 12mm thick acrylic polymer solid surface of corian (LG Himac, Dupoint, Neonnex or equivalent as
607 approved) at the designated location with necessary fixtures ,fittings etc. complete as shown in the drawing and as per the direction of the Engineer-In-Charge. Refer 72.00 each
Drg. No LKO_TD_B_DEC_0100_DW_0005_10
Providing, making and placing in position Ticket Counter made up from 19mm thick block board covered with 1.00mm thick laminate of approved make/ shade having
hard wood base of specified section including fixing of 12mm thick acrylic polymer solid surface of corian (LG Himac, Dupoint, Neonnex or equivalent as approved) at
608 the designated location with necessary fixtures ,fittings etc. complete as shown in the drawing and as per the direction of the Engineer-In-Charge . Refer Drg. No 16.00 each
LKO_TD_B_DEC_0100_DW_0005_01/11/12
Providing, making and placing in position Immigration counters made up from 19mm thick block board covered with 1.00mm thick laminate of approved make/ shade
having hard wood base of specified section including fixing of 12mm thick acrylic polymer solid surface of corian (LG Himac, Dupoint, Neonnex or equivalent as
609 approved) at the designated location with necessary fixtures ,fittings etc. complete as shown in the drawing and as per the direction of the Engineer-In-Charge . Refer 36.00 each
Drg. No LKO_TD_B_DEC_0100_DW_0005_09
Providing, making and placing in position Custom Counter made up from 19mm thick block board covered with 1.00mm thick laminate of approved make/ shade having
hard wood base of specified section including fixing of 12mm thick acrylic polymer solid surface of corian (LG Himac, Dupoint, Neonnex or equivalent as approved) at
610 the designated location with necessary fixtures ,fittings etc. complete as shown in the drawing and as per the direction of the Engineer-In-Charge . Refer Drg. No 6.00 each
LKO_TD_B_DEC_0100_DW_0005_14
Providing, making and placing in position Information Desk made up from 19mm thick block board covered with 1.00mm thick laminate of approved make/ shade
having hard wood base of specified section including fixing of 12mm thick acrylic polymer solid surface of corian (LG Himac, Dupoint, Neonnex or equivalent as
611 approved) at the designated location with necessary fixtures ,fittings etc. complete as shown in the drawing and as per the direction of the Engineer-In-Charge.Refer Drg. 4.00 each
No LKO_TD_B_DEC_0100_DW_0005_13
Providing, making and placing in position Inspection Desk made up from 19mm thick block board covered with 1.00mm thick laminate of approved make/ shade having
hard wood base of specified section including fixing of 12mm thick acrylic polymer solid surface of corian (LG Himac, Dupoint, Neonnex or equivalent as approved) at
612 the designated location with necessary fixtures ,fittings etc. complete as shown in the drawing and as per the direction of the Engineer-In-Charge.Refer Drg. No 20.00 each
LKO_TD_B_DEC_0100_DW_0005_04
SOQ - 67
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing in position security check inspection & X-ray Monitoring table of following sizes consisting of 19mm thick Commercial board of BWR grade covered
614 with 12mm thick corian of approved shade pasted over the CBB with adhesive and all necessary screws etc. complete as shown drawing No. MT/ID-32 and as per 30.00 each
direction of the Engoneer-in-Charge.Drg. No LKO_TD_B_DEC_0100_DW_0005_05
Providing, making and placing in position security check & stamping table Pedestal ( gents) made up from 19mm thick block board including fixing of 12mm thick acrylic
polymer solid surface of approved shade(LG Himac, Dupoint, Neonnex or equivalent as approved) and 1.0mm thick white Laminate on the under faces of the Desk at the
615 designated location with rounded edges with necessary fixtures ,fittings etc.complete as shown in the drawing and as per the direction of the Engineer-In-Charge. Refer 23.00 each
Drg. No LKO_TD_B_DEC_0100_DW_0005_07
Providing, Fabricating and installation in position of Security check for ladies (Frisking Booth ) comprising frame work of SS Section 50 x 50x 3mm over the 12mm thick
M.S base Plate fixed to the floor with the help of the fasteners.The frame work is covered with 12mm thick Toughened Glass screwed to the SS frame work with the help
of 25 dia SS studs,the toughened glass shall have 3 mm thick fasara film Matte crystal ( SH2 MACRX ) patsed internally, the frisking booth shall be a complete unit in itself
616 with all necessary fittings, fixtures etc.complete as shown in the Drg. MT/ID-30 and as per the direction of the Engineer-In-Charge.Refer Drg. No 13.00 each
LKO_TD_B_DEC_0100_DW_0005_06
"Fabrication, supply and installation of Binnacle consisting of M.S Frame work of tubular sections (M.S frame to be paid seprately in relevant item ) covered with 12mm
thick ply board of F.R grade all around,6mm thick toughened fritted glass is fixed to the 12mm ply board of FR grade with the help of ( GE WINSEL-20/Dow Corning-
786 ).The top of the AC riser shall have 6mm thick solid acrylic surface of approved colour over 12mm thick ply board of FR grade fixed to the MS frame work as shown in
the drawing no.ID-10,Base of the binnacle shall have skirting 300 wide and 1.2 mm thick stainless steel sheet of extruded sections fixed with screws,rubber beading ( for
holding screws ) etc. to the RCC base complete with fabrication to shape as required with necessary anchors,bolts,clips,counter sunk screws,washers packing,silicone
sealant,backer rod etc. as required for installation as per the approved shop drawing and instruction of the Engineer-in-Charge.
617 ( Note:- M.S framing to be paid seperately. Jet Diffuser, LCD Display,and Light fixure are not included in scope However, provisions for fixing the same are to be made.) 120.00 each
Refer Drg. No LKO_TD_B_DEC_0100_DW_0000_09
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6
metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with
G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I.barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with
618 reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of 500.00 metre
M.S. angle, C.C. blocks shall be paid separately)
Providing and erecting 2.0 metre high temporary barricading at site as per drawing/ direction of Engineer-in-Charge which includes writing and painting, arrangement for
traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-
in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as
required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and
works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge.
619 (Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the 2800.00 metre
property of the contractor on completion of the work).
SOQ - 68
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
Providing and fixing Vitreous China waterless unrinals of size 336.5mm x 495.3mm x 3302mm. Make Zeroflush (Model No 2F 501) or approved equivalent make . The
quoted rate shall include thecost of wall hung fixture i.e. waterless urinal pot, one unit integrated wall hanger, fastning hardware , built in centre draining receptacle to
621 accept the vertical draft , drain insert , mounting template, drain tube , rubber flange gasket and elastomer trap complete as per manufacturers specification and 24.00 each
directions of Engineers-in-charge.
0.00
SUB-HEAD: 21: PILING WORK:- 0.00
PILES 0.00
Boring, providing & installation bored cast in situ reinforced concrete piles of grade M-25 of specified diameter and length below pile cap to carry a safe working load not
less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for
setting out and removal of same and the length of pile to be embedded in the pile cap etc by crawler mounted telescopic boom hydraulic piling Rig all complete,
including removal of excavated earth with all it's lifts & leads. ( length of pile for payment shall be measured upto bottom of pile cap)
622 Note : Truck mounted rotary/TMR/Tube well boring machine shall not be used. 1.00 metre
1000 mm dia piles
Boring, providing & installation bored cast in situ reinforced concrete piles of grade M-25 of specified diameter and length below pile cap to carry a safe working load not
less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for
setting out and removal of same and the length of pile to be embedded in the pile cap etc by crawler mounted telescopic boom hydraulic piling Rig all complete,
including removal of excavated earth with all it's lifts & leads. ( length of pile for payment shall be measured upto bottom of pile cap)
623 Note : Truck mounted rotary/TMR/Tube well boring machine shall not be used. 9856.00 metre
1200 mm dia piles
Vertical load testing of Piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method & preparation of pile head or
construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge.
Group of two or more piles up to 50 ton safe capacity
624 Initial Test(Test load 2.5 times the safe capacity) 9.00 each
Vertical load testing of Piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method & preparation of pile head or
construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge.
Group of two or more piles up to 50 ton safe capacity
625 Routine Test (Test load 1.5 times the Safe capacity) 9.00 each
SOQ - 69
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
REVISED SCHEDULE OF QUANTITIES - CIVIL WORK
SOQ - 70
SUMMARY (Civil Works)
C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
SUB DESCRIPTION T0TAL 0F SHEDULE
HEAD ITEMS -DSR 2016
1.0 EARTH WORK 139939786.00
TOTAL = 4468444799.75
SUM(CIV) - 1
SUB DESCRIPTION T0TAL 0F SHEDULE
HEAD ITEMS -DSR 2016
Total
SUM(CIV) - 2
MMARY (Civil Works)
RNATIONAL AIRPORT, LUCKNOW
TOTAL OF NON- AMOUNT(IN RUPEES)
SHEDULE ITEMS
3938432.00 143878218.00
0.00 146373657.00
4046656.00 2673587346.00
4872360.00 114162236.00
24633238.00 36539557.00
1225542398.00 1240944383.00
54555405.00 399083676.00
845684437.00 1002853888.00
117282346.00 210410653.00
463071777.00 800722161.00
64497070.00 83596688.00
43977738.00 287757424.00
50633478.00 76328116.00
15937050.13 16592785.18
23985934.62 33656543.72
31225893.00 37125592.09
15798844.73 21990608.08
- 1571593.20
1555520.00 10256872.72
107660874.00 114378299.00
0.00 115533954.25
267233302.00 267233302.00
3366132753.48 7834577553.23
49 15 28 928
8326106481.20
SUM(CIV) - 3
TOTAL OF NON- AMOUNT(IN RUPEES)
SHEDULE ITEMS
83261064.81
8,409,367,546.01
Say 8,409,367,546.00
SUM(CIV) - 4
NAME OF WORK : CONSTRUCTION OF NEW INTEGRATED PASSENGER TERMINAL BUILDING AT C.C.S. INTERNATIONAL AIRPORT, LUCKNOW
SCHEDULE OF QUANTITIES - CIVIL WORK
AMOUNT
ITEM NO DESCRIPTION OF ITEM Terminal building Service Yard Elevated road QUANTITY UNIT RATE REFERENCE
DSR NON DSR
1 2 3 4 5 6 7 8
Additional Civil Works
Providing and supplying Structural Cement concrete of grade M-35 for pre-
cast girders ,crash barrier and RE wall panels complete including cost of
1349 shuttering,manufacturing in precasting yard, storage, transportation, 4800.00 4800.00 cum 10486.00 50332800.00 NS
erection but excluding reinforcement as per drawing and Technical
Specifications of MoRTH Sections 1500, 1700, 2100,2200,2300.
Providing and supplying Structural Cement concrete of grade M-35 for cast
1350 in situ pier,pile cap,slab ..etc complete including cost of shuttering,but 10454.00 10454.00 cum 10246.00 107111684.00 NS
excluding reinforcement as per drawing and Technical Specifications of
MoRTH Sections 1500, 1700, 2100,2200,2300.
Providing and supplying Structural Cement concrete of grade M-40 for cast
1351 in situ crash barrier,pedestals etc complete including cost of shuttering,but 638.00 638.00 cum 10576.00 6747488.00 NS
excluding reinforcement as per drawing and Technical Specifications of
MoRTH Sections 1500, 1700, 2100,2200,2300.
Providing and supplying Structural Cement concrete of grade M-45 for cast
1352 in situ portal beams etc complete including cost of shuttering,but excluding 4048.00 4048.00 cum 10797.00 43706256.00 NS
reinforcement as per drawing and Technical Specifications of MoRTH
Sections 1500, 1700, 2100,2200,2300.
Providing and supplying Structural Cement concrete of grade M-50 for cast in
situ PSC box girder etc complete including cost of shuttering,but excluding
reinforcement as per drawing and Technical Specifications of MoRTH Sections
1353 1500, 1700, 2100,2200,2300. 493.00 493.00 cum 12742.00 6281806.00 NS
Providing and fixing strip seal type expansion joint system with stud type anchorge
capable of accommodating movement up to 80mm gap, complete as per approved
1359 drawings and standard MoRTH technical specifications section 2600 to be installed by 1452 1452.00 Rmt 14882.00 NS
the manufacturer/supplier or their authorised representative ensuring compliance to
the manufacturer's instructions for installation.
Providing, supplying ,designing, of RE wall panels system with all necessary accessories
1360 like geostraps,Geomega connectors,EPDM pads,lifing anchors,Non-woven geotextile,etc 4327.00 4327 Sqm 2042.00 8835734.00 NS
as per MoRTH Technical specifications section 3100
0.00 267233302.00
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations
etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by
3 ramming and watering, lead with in AAI permise sand lift upto 1.5 m. 94380.00 1254.00 16812.00 112446.00 cum 125.75 14140085.00 2.25
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated
4 or stacked materials. 329770.00 13423.00 2978.00 346171.00 cum 51.75 17914349.00 2.26
All kinds of soil
Supplying and filling in plinth with fine sand in pile foundations and under floors,
5 including watering, ramming, consolidating and dressing complete. 14500.00 538.00 15038.00 cum 917.75 13801125.00 2.27
Open timbering over areas including strutting, shoring etc. complete.
6 (Measurements to be taken of the face area timbered). 20264.00 20264.00 sqm 193.80 3927163.00 Based on DSR
Depth upto 9.50 m
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in
width as well as 10 sqm on plan including getting out and disposal of excavated earth
with in AAI permises and lift upto 1.5 m, as directed by Engineer-in-Charge.
7 All kinds of soil. 30000.00 30000.00 sqm 53.00 1590000.00 2.1.1
Treatment of soil under floors using chemical emulsion @ one liter per hole, 300 mm
9 apart including drilling 12 mm diameter holes : 76000.00 210.00 76210.00 sqm 131.90 10052099.00 2.35.3.1
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
Providing & laying of Filter Media with granular materials/ stone crushed aggregates 3938432.00 N.S.
11 satisfying the requirements laid down in clause 2504.2.2 of MoRTH specifications to a 2122.00 2122.00 CUM 1856.00
thickness of not less than 600 mm.
Providing and laying in position cement concrete of specified grade excluding the cost of
centering and shuttering - All work upto plinth level
14 1:4:8 (1 Cement : 4 coarse sand (zone-III): 8 graded stone aggregate 40 mm nominal 6500.00 576 7076.00 cum 4478.15 31687389.00 4.1.8
size)
Providing and laying in position cement concrete of specified grade excluding the cost of
centering and shuttering - All work upto plinth level
15 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal 4213.00 4213.00 cum 5481.95 23095455.00 4.1.3
size)
Providing and laying in position cement concrete of specified grade excluding the cost of
centering and shuttering - All work upto plinth level
16 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 0.00 12.00 12.00 cum 4927.00 59124.00 4.1.5
Providing and laying in position ready mixed plain cement concrete, with cement
content as per approved design mix and manufactured in fully automatic batching plant
and transported to site of work in transit mixer for all leads, having continuous agitated
mixer, manufactured as per mix design of specified grade for plain cement concrete
work, including pumping of R.M.C. from transit mixer to site of laying and curing,
excluding the cost of centering and shuttering including cost of curing, admixtures in
recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,
improve workability without impairing strength and durability as per direction of the
Engineer-in-charge.
17 Note : 1) Excess/less cement used than specified in this item is payable/ recoverable 1865.00 1865.00 cum 6051.70 11286421.00 4.20.1.2
separately..
All works upto plinth level in M-10 grade plain cement concrete (cement content
considered @ 220 kg/cum)
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick
ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand,
19 including necessary excavation, levelling & dressing & finishing the top smooth. 1350.00 598.00 1948.00 sqm 450.35 877282.00 4.17
Providing and fixing up to floor five level precast cement concrete string or lacing
courses, copings, bed plates, anchor blocks, cover, plain window sills, shelves,
louvers, steps, stair cases, etc. including hoisting and setting in position with cement
mortar 1:3 (1 Cement : 3 coarse sand), cost of required centering, complete.
20 1:1.5:3 (1 Cement : 1.5 coarse sand ( Zone III) : 3 graded stone aggregate 20 mm 48.00 23.00 71.00 cum 6772.45 480844.00 4.5.1
nominal size)
Providing & laying in position ready mixed plain cement concrete, using fly ash and
cement content as per approved design mix and manufactured in fully automatic
batching plant and transported to site of work in transit mixer for all leads, having
continuous agitated mixer, manufactured as per mix design of specified grade for plain
cement concrete work, including pumping of R.M.C. from transit mixer to site of laying
and curing, excluding the cost of centering, shuttering and finishing, including cost of
curing, admixtures in recommended proportions as per IS : 9103 to accelerate/retard
setting of concrete, improve workability without imparing strength and durability as per
direction of Engineer-in charge.
Note : (1) Excess/less cement used than specified in this item is payable/recoverable
separately.
2. Fly ash confirming to grade 1 of IS 3812 (Part-1) only to be used as part replacement
21 of OPC as per IS:456. Uniform blending with cement is to be ensured in accordance with 348.00 348.00 CUM 6066.50 2111142.00
clauses 5.2 and 5.2.1 of IS : 456-2000 in the items of RMC
All works up to plinth level
M-15 grade plain cement concrete ( cement content considered @ 240 kg/cum
4.19.1.1
Note :- The contractor shall make necessary arrangement for dewatering (as per site
requirment and to maintain the progress) of sub-soil water, drain water, rain water or of
any kind, at their own cost for smooth execution and proper implementation of any
above items required for completion of entire project. Nothing extra shall be payable on
account of excution of work in or under water and / or liquid mud, including pumping
out of water as required at site.
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement
concrete work, using cement content as per approved design mix, manufactured in
fully automatic batching plant and transported to site of work in transit mixer for all
leads, having continuous agitated mixer, manufactured as per mix design of specified
grade for reinforced cement concrete work, including pumping of R.M.C. from transit
mixer to site of laying , excluding the cost of centering, shuttering and reinforcement,
including cost of admixtures in recommended proportions as per IS : 9103 to
accelerate/manufacturer's specifications/ approved design mix retard setting of
concrete, improve workability without impairing strength and durability as per direction
23 of the Engineer-in-charge. 46500.00 2755.00 49255.00 cum 7517.20 370259686.00 5.37.2
(Note: Cement content considered in this item is 330 Kg/cum. Excess/less cement used
as per design mix is payable /recoverable separately)
All works above plinth level upto floor V level .
Steel reinforcement for R.C.C. work ready to use " cut and bend " rebars of approved
make from factory/ workshop to construction site including placing in position and
binding with binding wire all complete .
27 Upto Plinth Level 12117920.00 572000.00 1594973.00 14284893.00 Kg 54.10 772812711.00 5.22 B
Thermo-Mechanically Treated bars (Fe 500-D) or more
Steel reinforcement for R.C.C. work ready to use " cut and bend " rebars of approved
make from factory/ workshop to construction site including placing in position and
binding with binding wire all complete .
28 Above Plinth Level 8600000.00 376000.00 1646378.00 10622378.00 Kg 54.10 574670650.00 5.22 C
Thermo-Mechanically Treated bars (Fe 500-D) or more
Centering and shuttering including strutting, propping etc for all height/ Depth. and
removal of form for :
30 Walls (any thickness) including attached pilasters buttresses , plinth and string courses 46350.00 15909.00 62259.00 sqm 378.60 23571257.00 5.9.2
etc
Centering and shuttering including strutting, propping etc for all height/ Depth. and
31 removal of form for : 79500.00 5590.00 85090.00 sqm 422.30 35933507.00 5.9.3
Suspended floors, roofs, landings, balconies and access platform.
Centering and shuttering including strutting, propping etc for all height/ Depth. and
32 removal of form for : 500.00 100.00 600.00 sqm 422.30 253380.00 5.9.4
Shelves (cast in situ)
Centering and shuttering including strutting, propping etc for all height/ Depth. and
33 removal of form for : 138500.00 8537 147037.00 sqm 342.90 50418987.00 5.9.5
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
Centering and shuttering including strutting, propping etc for all height/ Depth. and
34 removal of form for : 36100.00 2865.00 38965.00 sqm 467.85 18229775.00 5.9.6
Columns, Pillars, Piers, Abutments, Posts and Struts.
Centering and shuttering including strutting, propping etc for all height/ Depth. and
35 removal of form for : 3780.00 95.00 3875.00 sqm 419.35 1624981.00 5.9.7
Stairs, (excluding landings) except spiral - staircases.
Centering and shuttering including strutting, propping etc for all height/ Depth. and
removal of form for :
36 Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, 1000.00 200.00 1200.00 sqm 193.95 232740.00 5.9.15
string courses, bands, copings, bed plates, anchor blocks and the like.
Centering and shuttering including strutting, propping etc for all height/ Depth. and
37 removal of form for : 1000.00 200.00 1200.00 metre 122.20 146640.00 5.9.16.1
Edges of slab and breaks in floors and walls under 20 cms wide
Centering and shuttering including strutting, propping etc for all height/ Depth. and
38 removal of form for : 500.00 100.00 600.00 sqm 521.75 313050.00 5.9.19
Weather shade, Chajjas, corbels etc., including edges.
Centering and shuttering including strutting, propping etc for all height/ Depth. and
removal of form for :
39 Extra for shuttering in circular work (20% of respective centering and shuttering items) 40000.00 0 40000.00 sqm 75.72 3028800.00 5.9.14
Centering and shuttering including strutting, propping etc for all height/ Depth. and
removal of form for :
40 Vertical and horizontal fins individually or forming box louvers band, facias and eaves 500.00 100.00 600.00 sqm 627.85 376710.00 5.9.13
boars.
Extra for additional height in centering, shuttering where ever required with adequate
bracing, propping etc., including cost of de-shuttering / centering at all levels, over a
height of 3.50 m, for every additional height of 1 metre or part thereof (Plan area to be
measured).
41 Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) 311000.00 27228 338228.00 sqm 171.50 58006102.00 5.11.1
Centering and shuttering including strutting, propping etc for all height/ Depth. and
removal of form for :
42 Suspended floors, roofs, columns , landings, balconies and access platform. with water 79500.00 79500.00 sqm 497.45 39547275.00 5.9.20
proof ply 12 mm thick.
Providing and fixing of expansion joint system related with floor location as per
drawings and direction of Engineer-In-Charge. The joints system will be of extruded
aluminum base members, self aligning / self centering arrangement and support plates
etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor
to wall expansion control system for various vertical location in load application areas
that accommodates multi directional seismic movement without stress to it’s
components. System shall consist of metal profiles with a universal. aluminum base
member designed to accommodate various project conditions and finish floor
treatments. The cover plate shall be designed of width and thickness required to satisfy
projects movement and loading requirements and secured to base members by utilizing
manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves
in all directions.
The Self – centering arrangement shall exhibit circular sphere ends that lock and slide
inside the corresponding aluminum extrusion cavity to allow freedom of movement and
44 flexure in all directions including vertical displacement. Provision of Moisture Barrier 1988.00 0.00 1988.00 metre 5829.95 11589941.00 5.44.2
Membrane in the Joint System to have watertight joint is mandatory requirement all as
per the manufactures design and as approved by Engineer -in- Charge . (Material shall
confirm to ASTM 6063.)
Floor joint upto 150mm gap
Providing and fixing of expansion joint system related with wall joint (internal/ external)
location as per drawings and direction of Engineer-In- Charge. The joints shall be of
extruded aluminum base members, self aligning / centering arrangement and support
plates as per ASTM B221- 02. The material shall be such that it provides an Expansion
Joints System suitable for vertical wall to wall/ wall to corner application, both new and
existing construction in office Buildings & complexes with no slipping down tendency
amongst the components of the Joint System. The Joint System shall utilize light weight
aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap
45 locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063.) 1380.00 0 1380.00 metre 4436.15 6121887.00 5.45.2
Providing and fixing Expansion joint filler board of approved barand of Dawn colour
between expansion joints, thickness built up using 10mm specifically extruded high
performance sheet minimum density 28 kg per cum and compression strength 0.21
Kg./Sqm when tested as per ASTM D-3575 including using double sided adhesive SIL
tape (manufactured by Supreme Industries Ltd. or approved equivalent) of 25x25x2 mm
at four places per Sqm to the casted surface to form the expansion joint filler board will
become one side of the shuttering while the expansion joint is being created, including
cost of all materials, Transportation, cutting and placing to the required size, labour
47 charges, sundries, wastage etc.at all levels complete as per drawings and as per 2386.00 0 2386.00 sqm 1696.00 4046656.00 MR
direction of Engineer-in-Charge.
150mm thick
Supplying and applying pre tested and approved water based concrete curing
compound to concrete/ masonry surface, all as per manufacturer’s specification and
direction of Engineer-in-charge.( Not to be applied for shutter finish concrete surface)
48 Non Pigmented wet curing compound 300450.00 300450.00 sqm 32.20 9674490.00 5.41.1
Add or deduct for using extra cement in the items of design mix over and above the
49 specified cement content therein 100.00 100 200.00 quintal 672.75 134550.00 5.35
Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part
50 thereof. 100.00 100.00 200.00 cum 232.30 46460.00 5.38
Providing and fixing parallel threaded couplers conforming to IS code on
“Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement -
Specification”, to reinforcement bars including threading, enlargement at connection by
forging, protecting the prepared reinforcement bars and related operations as required
51 to complete the works per direction of Engineer-in-Charge. 4137.00 4137.00 each 121.10 500991.00 5.42.1
Coupler for 16 mm diameter reinforcement bar
Note :- The contractor shall make necessary arrangement for dewatering (as per site
requirment and to maintain the progress) of sub-soil water, drain water, rain water or of
any kind, at their own cost for smooth execution and proper implementation of any
above items required for completion of entire project. Nothing extra shall be payable on
account of excution of work in or under water and / or liquid mud, including pumping
out of water as required at site.
Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 7.5
in superstructure above plinth level upto floor all level including RCC band as required
58 in all shapes and sizes in Cement mortar 1:6 (1 Cement : 6 coarse sand) 7425.00 33.00 7458.00 cum 5582.85 41636895.00 6.4.2
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundation and plinth including RCC band as required in
60 Cement mortar 1:4 (1 Cement : 4 coarse sand) 100.00 50.00 150.00 sqm 593.50 89025.00 6.12.2
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in superstructure above plinth level including RCC band as required up
61 to floor all level. 500.00 117.00 617.00 sqm 684.20 422151.00 6.13.2
Cement mortar 1:4 (1 cement :4 coarse sand).
Extra for providing and placing including drilling where as requred in position 2 Nos. 6
62 mm dia M.S. bars at every third course of half brick masonry 600.00 279.00 879.00 sqm 56.85 49971.00 6.15
Providing and fixing 75 mm thick extruded polystyrene rigid insulation board of required
size between cavity wall, complying with ISO 4898:2008 & ASTM C 578-08b/15b - type
VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per
IS 346),compressive strength of > 350 kPa listed as per ASTM D 1621,density of 34-36
kg/cum as per ASTM D 1622, water absorption <1% by volume as per ASTM D 2842,
oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as
63 per ASTM D 3576. Fire retardant property as per DIN 4102, Part 1 of class B2 and as per 4274.00 4274.00 sqm 1140.00 4872360.00 Based on DSR-26.7
ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all
respect as per the directions of Engineer-in-Charge .
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener
of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk
head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in
65 frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. 5164.00 192.00 5356.00 Each 102.80 550597.00 10.27.4
(Size-10x140mm)
Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in
gloss / matt/ suede finish with high density protective surface layer and reverse side of
adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of
67 approved quality.: 1988.00 154.00 2142.00 sqm 837.40 1793711.00 9.127.1
1.5 mm thick
Providing and fixing in position single leaf fire check doors and frames at all levels of
approved make ( navior, sukrti, iCLEAN ) , design, finish, tested and certified at CBRI,
Roorkee or equivalent as approved. complete in all respect as per specifications and
direction of Engineer-In-Charge and consisting of :-
a) Pressed male door frames manufactured from 1.6mm(16gauge) thick galvanised steel
sheet confirming to IS 277(2003) of double rebate profile of size minimum( 143mm X 57
mm) finished with 'H' -primer
b)minimum 46mm thick G.I. fire check door of 120 minutes fire rating conforming to
BS:476 part 22 & IS : 364 part II fabricated with 2 nos. 1.2mm thick(18 gauge)
galvanised sheet with infill of fire rated properitory insulation filler bonded to both
faces of sheet with lock seam joints at style edges and internal reinforcement at top,
bottom and style edges and internal reinforcement at top bottom and style edges for
fire rating .
c)The door frames and door shutters shall be primed with 'H' primer and finished with
PU/Powder coated . The shutter would be mounted with SS Ball Bearing Hinges of size
100mm x 75mm x 3.0mm of Becker Fire Solutions ( 4Nos per leaf ),appropriate
openings for vision panel glass. Prototype Test certificate for a test carried out earlier at
CBRI Roorkee or as approved equivalent for fire rating of doors, shall be attached along
68 with manufacturers test certificate. 88.00 10.00 98.00 sqm 15383.00 1507534.00 MR
d) All door shall be factory made including hardwares i.e. hinges, panic bar, door closer,
lock, handles etc as desired with necessary reinforcement and direction of Engineer in
charge.
e) Minimum 5 mm thick Pyron /pyrobeck / Central/Saint Gobain Fire Rated Clear Non
Wired Glass of 120 minutes rating one on each leaf of size 300 x 300mm.
Single Leaf Door with vision with a guaranteed of 120 minutes fire rating (Please note :-
The contractor should give the guarantee bond of fire rating).
Note:- Surface area of shutter including door frame in elevation (one side Only) shall
be measured for payment..
Providing and fixing stainless steel (grade 304) tower bolts of Yale 254 /Dline-Carl - F /
Hafele/ DORMA make or approved equivalent with necessary screws etc complete.
In stainless steel satin / polished finish
70 250 x10 mm 1022.00 42.00 1064.00 Each 455.00 484120.00 MR
Providing and fixing stainless steel (grade 304) tower bolts of Yale 152 Dline-Carl - F /
Hafele/ DORMA make or approved equivalent with necessary screws etc complete.
In stainless steel satin / polished finish
71 150x10 mm 1022.00 42.00 1064.00 Each 295.00 313880.00 MR
Providing and fixing stainless steel (grade 304) tower bolts of Yale 100/ Dline-Carl - F /
Hafele/ DORMA make or approved equivalent with necessary screws etc complete.
In stainless steel satin / polished finish
72 100x10 mm 100.00 5.00 105.00 Each 252.00 26460.00 MR
Providing and fixing bright finished 100 mm mortise latch and lock with six levers in
stainless steel satin finish and a pair of stainless steel lever handles of make Hafele
make (article no. 911.02.165, 916.96.006, 903.99.058) / Dorma (Pure 8100) /Yale make
(article no. YTL-030+38P3+60MMDPSN-S) or approved equivalent make with
73 necessary s.s. screws etc. complete as per direction of Engineer in charge. 265.00 18.00 283.00 Each 3056.00 864848.00 MR
Providing and fixing Stainless Steel (grade 304) floor door stoppers in stainless steel
satin finish (Twin) of Dorma(TZ-5000)/Hafele make (article no.937.13.53033/ Yale or
equivalent) make with necessary ss screws etc. or approved equivalent make with
75 necessary s.s. screws etc. complete as per direction of Engineer in charge. 1022.00 42.00 1064.00 Each 209.00 222376.00 MR
Providing and fixing aluminum extruded section body tubular type universal hydraulic
door closer (having brand logo with IS : 3564, embossed on the body, door weight upto
36 kg to 80 kg and door width from 701 mm to 1100 mm), with double speed
adjustment with necessary accessories and screws etc. complete. The manufacturer
certificate for Life cycle of the door closer has to be 500000 cycle tested certificate has
76 to be submitted by agency) . Dorma(TS-68)/Hafele make (article no.DCR 1824 FR/ Yale 1022.00 21.00 1043.00 Each 2455.00 2560565.00 MR
-931.84.659 or equivalent)
Providing and fixing wooden moulded beading to door and window frame with iron
screws, plugs and priming coat on unexposed surface etc. complete.( 2nd class teak
77 wood) 3866.00 138.00 4004.00 metre 154.75 619619.00 9.40.1.2
50x20mm or 80x12.5mm as desired
Providing and fixing Toilet cubicles as under with door, pilaster and divider of 18mm
thick board both side decorative compact laminate of required colour ,shade and sizes
as manufactured by Besco Merino or T Line or Greenlam Sturdo or equivalent as
approved, including stainless steel accessories ( SS-304 grade) like square top rail.
Front panel and divider wall with stripe shoe touching floor (No gap shall be at bottom
of divider/front panel except door), knob, thumb turn and indicator, twin coat hook,
door stopper, adjustable shoe, gravity hinges, and locking arrangement, SS channel etc
as desired. all complete as per drawings. The cubical unit shall be installed in approved
finish, shades and colours as per specifications and direction of Engineer in charge. The
cubical unit shall be minimum 10 years guarantee for the board against any moisture
78 and 5 years guarantee for the hardwares. 232.00 232.00 Each 54137.50 12559900.00 MR
L-shape toilet cubicles of size 900mm (width) X 1500mm (depth) X 2100mm (height)
with door ,External Laminate finish = Metallic
Providing and fixing Toilet cubicles as under with door, pilaster and divider of 18mm
thick board both side decorative compact laminate of required colour ,shade and sizes
as manufactured by Besco Merino or T Line or Greenlam Sturdo or equivalent as
approved, including stainless steel accessories ( SS-304 grade) like square top rail.
Front panel and divider wall with stripe shoe touching floor (No gap shall be at bottom
of divider/front panel except door), knob, thumb turn and indicator, twin coat hook,
door stopper, adjustable shoe, gravity hinges, and locking arrangement, SS channel etc
as desired. all complete as per drawings. The cubical unit shall be installed in approved
finish, shades and colours as per specifications and direction of Engineer in charge. The
cubical unit shall be minimum 5 years guarantee for the board against any moisture and
79 5 years guarantee for the hardwares. 38.00 38.00 Each 39061.20 1484326.00 MR
I-shape toilet cubicles of size 900mm (width) X 1500mm (depth) X 2100mm (height)
with door ,External Laminate finish = Metallic
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of
81 glass excluded) (overall area of door shutter to be measured) rectangular or square: 1988.00 1988.00 sqm 162.60 323249.00 9.24.1
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).:
82 1252.00 68.00 1320.00 sqm 127.75 168630.00 9.26
Providing and fixing aluminum tower bolts, ISI marked, anodised (anodic coating not
less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade,
83 with necessary screws etc. complete : 100.00 5.00 105.00 Each 88.10 9251.00 9.97.2
250x10mm
Providing and fixing aluminum tower bolts, ISI marked, anodised (anodic coating not
less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade,
84 with necessary screws etc. complete : 100.00 108.00 208.00 Each 64.30 13374.00 9.97.4
150x10mm
Providing and fixing in wall partition/lining medium density fibre board IS:14587:1998
marked, Pre-laminated one side decorative lamination and other side balancing
lamination, with necessary fixing arrangement and screws/ 3M tap etc. complete.
85 18 mm thick 250.00 250.00 sqm 915.20 228800.00 9.158.2
Providing and fixing partition upto ceiling height consisting of G.I. frame and required
board, including providing and fixing of frame work made of special section power
pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive),
consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and
0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm center to center
with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or
metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm
and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and
ceiling channel and placed at a spacing of 610mm center to center by 6 mm dia bolts
and nuts, including fixing of studs along both ends of partition fixed flush to wall with
suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre
to centre, and fixing of boards to both side of frame work by 25 mm long dry wall
screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. .
The boards are to be fixed to the frame work with joints staggered to avoid through
cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm
each) to be provided at the horizontal joints of two boards, fixed to the studs using
86 metal to metal flat head screws, including jointing and finishing to a flush finish with 350.00 350.00 sqm 1309.65 458378.00 9.105.1
recommended jointing compound, jointing tape, angle beads at corner (25 mm x 25
mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per
manufacture's specification and direction of engineer in charge all complete.
75 mm overall thickness full height partition with 12.5 mm thick double skin fire rated
gypsum board of approved make conforming to IS: 2095: part I
Providing and fixing bright /matt finished Stainless Steel handles of approved quality &
87 make with necessary screws etc all complete. 250.00 84.00 334.00 Nos 89.70 29960.00 9.165
125 mm
Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of
approved quality with necessary stainless steel screws etc. to the side hung windows as
88 per direction of Engineerin- charge complete. 50.00 54.00 104.00 Nos 237.15 24664.00 21.11.3
355 X 19 mm
90 Providing and fixing ball bearing for rolling shutters. 16.00 36.00 52.00 Each 379.30 19724.00 10.7
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar
91 instead of laths as per design approved by Engineer-in- charge, (area of grill to be 16.00 33.00 49.00 sqm 313.60 15366.00 10.9
measured)..
Extra for Providing mechanical device chain and cranks operation for operating rolling
92 shutters exceeding 10 sqm and upto 16.80 sqm in the area 56.00 98.00 154.00 sqm 724.05 111504.00 10.8.1
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer using structural steel etc.
as required.
93 In stringers, treads, landings etc. of stair cases, including use of chequered plate 1000.00 15785.00 16785.00 Kg 65.80 1104453.00 10.25.1
wherever required, all complete
Steel work welded in built up sections/framed work including cutting hoisting, fixing in
position and applying a priming coat of approved steel primer using structural steel etc.
as required.
94 In gratings, frames, guard bar, ladders, railings, louvers, insert ,brackets, gates etc and 75500.00 8631.00 39256.00 123387.00 Kg 85.95 10605113.00 10.25.2
similar works.
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing,
balcony railing, staircase railing and similar works,including applying priming coat of
95 approved steel primer. 23241.00 23241.00 Kg 92.00 2138172.00 10.26.1
M.S. tube .
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron
and 3mm M.S. gusset plates at the junction and corners , all necessary fittings
complete, including applying a priming coat of approved steel primer.
99 Using M.S angles 40x40x6mm for diagonal braces. 100.00 100.00 sqm 2870.25 287025.00 10.5.1
Providing and fixing bolts of grade 10.9 conforming to IS 1367(Part 1/2/3) including nuts
100 and washers complete. 500.00 500.00 Kg 96.25 48125.00 10.20
Structural Steel work in single section fixed with or without connecting plate including
101 cutting, hoisting, fixing in position and applying a priming coat of approved steel primer 3430.00 3430.00 Kg 58.45 200484.00 10.1
all complete
Structural Steel work in riveted, bolted or welded in built up sections, trusses and
102 framed work, including cutting, hoisting, fixing in position and applying a priming coat 1.00 1.00 Kg 67.60 68.00
of approved steel primer all complete.
10.2
TOTAL SUB HEAD -6 15401985.00 1225542398.00
(SH: - 7.0 - FLOORING WORK)
62 mm thick cement concrete flooring with concrete hardener topping under layer 50
mm thick cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate
20 mm nominal size) and top layer 12 mm thick Hardcrete cement hardener consisting
of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by
volume hardening compound is mixed @ 2 litre per 50 kg of cement or as per
103 manufacturers specifications. This included cost of cement slurry, but excluding the 1207.00 3631.00 4838.00 sqm 609.05 2946584.00 11.5
cost of nosing of steps etc. complete.
Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (1 Cement: 3
104 coarse sand) finished with a floating coat of neat cement. 91.00 288.00 379.00 sqm 350.05 132669.00 11.6.1
18 mm thick
Providing and fixing glass strips in joints of terrazo/ cement concrete floors.
105 40 mm wide and 4 mm thick 3621.00 10893.00 14514.00 metre 52.50 761985.00 11.13.1
Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey
cement slurry mixed with pigment to match the shade of the slab including rubbing
polishing and groove complete with base of cement mortar 1 : 4 ( 1 cement : 4 coarse
106 sand) : 5234.00 166.00 5400.00 sqm 1158.10 6253740.00 11.26.1
25 mm thick
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm
(average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey
107 cement slurry mixed with pigment to match the shade of the slabs, including rubbing 721.00 54.00 775.00 sqm 1238.20 959605.00 11.27
polishing and groove complete.
Providing and laying Digital Placement of Color / 100% Solution Dyed Nylon 6.6 carpet
tiles ( anti static ) Tufted level Loop Pile tiles shade and pattren as approved make &
size 500 x 500 mm / 600 x 600 mm with protective stain treatment(s), soil protection to
repel and resist Stain and Anti Microbial treatment, Appearance Retention Rating (CRI
101) for severe use with PVC free backing having min. face eight of 10 gsm conforming
to ASTME – 648 Flooring Radiant Panel Class I grade including fixing with Volatile
109 Organic Compound (VOC) Free Adhesive etc. complete as per drawing and directions of 8716.00 8716.00 sqm 2571.00 22408836.00 MR
Engineer-In-Charge.
.
Providing and laying full body / homogenous/ double charge Vitrified tiles ( Polish /
satin Finish/ anti skid) in floor with different sizes ( thickness to be specified by the
manufacturer),with water absorption less than 0.08% and confirming to IS; 15622, of
approved brand & manufacturer, in all colours and shade, laid with cement based high
polymer modified quick set tile adhesive ( water based ) conforming to IS; 15477 , in
average 6mm thickness, including grouting of joints .( payment for grouching of joints to
110 be made separately) 16900.00 82.00 16982.00 sqm 1169.55 19861298.00 11..49.2
satin finish Vitrified Tile
Size of Tile 600 x 600 mm
Providing and laying full body / homogenous/ double charge Vitrified tiles ( Polish /
satin Finish/ anti skid) in floor with different sizes ( thickness to be specified by the
manufacturer),with water absorption less than 0.08% and confirming to IS; 15622, of
approved brand & manufacturer, in all colours and shade, laid with cement based high
polymer modified quick set tile adhesive ( water based ) conforming to IS; 15477 , in
average 6mm thickness, including grouting of joints .( payment for groughting of joints
112 to be made separately) 28127.00 28127.00 sqm 2110.10 59350783.00 11..49.4
satin finish Vitrified Tile
Size of Tile 1000 x 1000 mm
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the
manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of
approved brand & manufacturer, in all colours and shade, in skirting, riser of steps,dado
laid with cement based high polymer modified quick set tile adhesive (water based)
conforming to IS: 15477, in average 6 mm thickness, including grouting of joints
(Payment for grouting of joints to be made separately).
113 Polish finish vitrified tile 2620.00 73.00 2693.00 sqm 1135.20 3057094.00 11.47.2
Size of Tile 600 x 600 mm or 300x600mm
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the
manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of
approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, dado
laid with cement based high polymer modified quick set tile adhesive (water based)
conforming to IS: 15477, in average 6 mm thickness, including grouting of joints
(Payment for grouting of joints to be made separately).
114 Polish finish vitrified tile 5662.00 5662.00 sqm 1538.25 8709572.00 11.47.3
Size of Tile 800 x 800 mm or 800x1200mm
Providing and laying matt finished vitrified tile of size 100x100x16mm having water
absorption less than 0.5% and conforming to IS: 5622 of approved make in all colours
and shades in out door floors such as footpath, court yard multi models etc., laid on
20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes &
115 patterns including grouting the joints with white cement mixed with matching pigments 2580.00 2580.00 sqm 842.95 2174811.00 16.88
etc. complete as direction of Engineer-in-Charge.
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be
specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make
in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement
mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.30kg/sqm
116 833.00 833.00 sqm 747.90 623001.00 11.37
including pointing the joints with white cement and matching pigment etc., complete..
Providing and laying tactile tile (for vision impaired persons as per standards) of size
300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622,
of approved make in all colours and shades in outdoor floors such as footpath, court
yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1
118 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white 1969.00 1969.00 sqm 1450.45 2855936.00 16.90
cement mixed with matching pigments etc. complete as per direction of Engineer-in-
Charge.
Providing and fixing 18mm thick gangsaw cut mirror polished (premoulded and
prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias
and similar locations of required size of approved shade, colour and texture laid over
20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with
white cement, mixed with matching pigment, epoxy touch ups, including
119 rubbing,groove, curing moulding and polishing to edge to give high gloss finish etc. 286.00 32.00 318.00 sqm 3113.30 990029.00 8.2.2.2
complete at all levels..
Granite of any colour and shade (Area of slab over 0.50 sqm)
Providing edge moulding to 18 mm thick marble/ granite stone counters, Vanities etc.
including machine polishing to edge to give high gloss finish etc. complete as per design
120 approved by Engineer-in-charge. 333.00 32.00 365.00 metre 245.70 89681.00 8.3.2
Granite work
Extra for providing opening of required size & shape for wash basin/ kitchen sink in
kitchen platform, vanity counter and similar location in marble/ stone work including
121 necessary holes for pillar tabs etc including rubbing & polishing of cut edges etc 282.00 7.00 289.00 Each 427.95 123678.00 8.5
complete
Providing and laying Polished Granite stone flooring in required design and patterns, in
linear as well as curvilinear portions of the building, all complete as per the
architectural drawings, laid over 15 mm (average) thick correction layer base of cement
mortar 1:4 (1 cement: 4 coarse sand) followed by laying and fixing with high polymer
modified quick set adhesive of make Ferrouscrete / Pidilite/ Ardex Endura / MAPEI /
MYK Laticrete or equivalent with average 6mm thickness and jointed with cement
slurry and pointing with white cement slurry admixed with pigment of matching shade,
including groove, rubbing, curing and polishing etc. all complete as specified and as
122 directed by the Engineer-in-Charge. 9246.00 9246.00 sqm 3524.00 32582904.00 Based on DSR-8.13.1
Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent as
approved.
Providing and fixing machine cut, mirror/ eggshell polished , granite stone work for wall
lining (veneer work) , dado, skirting, risers of steps etc., in required design and pattern
wherever required, stones of different finished surface texture, on 12 mm (average)
thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement
slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment
of matching shade, including groove ,rubbing, curing, polishing etc. all complete as per
123 Architectural drawings, and as directed by the Engineer-in-Charge. 1538.00 1538.00 sqm 5895.00 9066510.00 Based on DSR-8.11.1
18mm thick Granite in all shade / colour / size (Area of slab over 0.50 sqm) as approved
by Engineer in charge.
Providing and fixing machine cut, mirror/ eggshell polished , Engineered marble stone
work for wall lining (veneer work) including dado, skirting, risers of steps etc., in
required design and pattern wherever required, stones of different finished surface
texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid
and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white
cement slurry admixed with pigment of matching shade, including groove, rubbing,
125 curing, polishing etc. all complete as per Architectural drawings, and as directed by the 1538.00 1538.00 sqm 5895.00 9066510.00 Based on DSR-8.11.1
Engineer-in-Charge.
18mm thick Engineered marble stone in all shade / colour / size (Area of slab over 0.50
sqm) as approved by Engineer in charge...
Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre
polished machine cut granite stone of required size and shape of approved shade,
colour and texture in footpath, flooring in road side plazas, forecourt area, Kerb area
and similar locations,laid over 15 mm (average) thick correction layer base of cement
mortar 1:4 (1 cement: 4 coarse sand) followed by laying and fixing with high polymer
modified quick set adhesive of make Ferrouscrete / Pidilite/ Ardex Endura / MAPEI /
MYK Laticrete or equivalent with average 6mm thickness including grouting the joints
with white cement mixed with matching pigment, epoxy touch ups, groove etc.
126 complete as per direction of Engineer-in-Charge. 1102.00 1102.00 sqm 4058.30 4472247.00 Based on DSR-8.13.1
30mm thick Granite in all shade / colour / size (Area of slab over 0.50 sqm) as approved
by Engineer in charge.
Providing and laying machine cut, mirror polished Marble stone flooring, in required
design (Simple geometrical, abstract etc.) and in patterns in combination with Italian
marble stones of different colours, shades and finished surface texture etc., in linear
portions of the building, all complete as per the architectural drawings, with 18 mm
thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement :
4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including
pointing with white cement slurry admixed with pigment to match the marble shade
including groove, rubbing, curing and polishing etc. all complete as specified and as
128 directed by the Engineer-in-Charge. 6030.00 6030.00 sqm 5233.75 31559513.00 11.52.1
18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Bottochino, Fire Red or
Dark Emperadore or equivalent as approved etc.
Providing & fixing in position Phenol bonded Bamboo wood flooring with planks of sizes
14mm thick, 1800mm length (minimum) and 130 mm wide(minimum), in approved
colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by
Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed
with tongue and groove interlocking system, with underlayment of 4mm thick
expanded poly ethylene foam sheets having density 40kg/cum, over prepared surface
with necessary quarter round planks of size 1900mm x 18mm and door reducer of size
130 1900mm x 44mm, wherever required. The bomboowood planks shall have minimum 2929.00 2929.00 sqm 4959.20 14525497.00 26.1
density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all
complete as per direction of Engineer in-charge.
Providing & fixing in position Phenol bonded Bamboo wood in wall skirting with planks
of sizes 14mm thick, 1900mm length (minimum) and 85mm wide(minimum), in
approved colour, texture and finish, having Performance Appraisal Certificate (PAC)
issued by Building Materials & Technology Promotion Council (BMTPC). The skirting
shall be fixed with SS screws & rawl plugs, over underlayment of 4mm thick, expanded
poly ethylene foam sheets having 40kg/cum density over prepared surface. The
131 bomboowood planks shall have minimum density of 1000 Kg/cum & minimum 163.00 163.00 sqm 4769.55 777437.00 26.2
Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of
Engineer in-charge.
Providing & fixing in position Phenol bonded Bamboo wood wall cladding at all height
with planks of sizes 10mm thick, 1800mm length (minimum) and 130 mm wide
(minimum), in approved colour, texture and finish, having Performance Appraisal
Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC),
with necessary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame
work made of second class teak wood of size 20x15 mm in centre of each tile and
bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall
be laid over backlayment of 1.00 mm thick expanded poly ethylene foam of density
132 40kg/cum in two layers, first layer on wall surface before fixing wooden frame and 330.00 330.00 sqm 4784.75 1578968.00 26.3
second layer on frame under cladding. The bomboowood planks shall have minimum
density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all
complete as per direction of Engineer in-charge..
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x20 mm) with SRI
(solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on
waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in
the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white
cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface
133 upto 3 cuts complete, including providing skirting upto 150 mm height along the 3261.00 3261.00 sqm 1150.00 3750150.00 12.55
parapet walls in the same manner.
Providing and laying aluminum dust buster matting (whipping & scrapping -moisture &
135 dirt recessed ) for main entry as per manufacturer specifictions and direction of 126.00 126.00 sqm 2096.00 264096.00 MR
Engineer in charge.
Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut
stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to
structural steel frame work and / or with the help of cramps, pins etc. and sealing the
joints with approved weather sealant as per Architectural drawing and direction of
136 Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be 3004.00 3004.00 sqm 1439.75 4325009.00 7.40.1
paid for separately)..
Red sand stone - 30mm thick gang saw cut stone .
Providing and fixing dry cladding at all heights with 30mm thick gang saw cut stone as
approved fixed to RCC/ Masonry surface with the help of stainless steel cramps of
required shape and size, pins etc. and sealing the joints with approved weather sealant
including grouting the frame work/cramps/pins, maintaining the grooves in stone slabs
as per the drawing and filling the same with non-staining, non-streaking silicon joint
sealants of approved make, including backer rod, drilling, anchoring, grouting,
scaffolding, edge polishing, groove,chamfering to received tapered stone and providing
and applying coating on external surface of stone with solvent based silicone sealant of
approved make as per manufacturer's specifications etc., all complete as per
architectural drawings and direction of Engineer in charge. (Only exposed surface will
137 be measured for payment. The stainless steel cramps and pins shall be paid for 9461.00 9461.00 sqm 4793.00 45346573.00 base as DSR 7.40.1
separately).
30mm thick Granite in all shade / colour / size (Area of slab over 0.50 sqm) as
approved by Engineer in charge.
Providing and fixing adjustable stainless steel cramps of approved quality of Hilty or as
approved equivalent make of required shape and size, adjustable with stainless steel
nuts, bolts and washer (total weight not less than 260 gms , Clamp of 304 grade
wherein pin of 316 grade, clamp body min 5mm thick and shall carry a dead load of
79.5 kgs at min offset, clamp available with variable offset lengths from 50-65mm or as
desired for stone dry stone cladding fixed at suitable location, including making
necessary recesses in stone slab, drilling required holes etc. complete as per direction of
the Engineer-in-charge. Clamps shall be fastened by ETA Approved anchor suitable to be
138 used on AAC blocks/CC hollow blocks/fly ash brick/ RCC Column / beam work 37395.00 37395.00 Each 217.15 8120324.00 7.42
comprising of polyamide PA 6 grade sleeve and stainless steel (304) grade double
threaded screw with hexagonal head.
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix
of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of
resin per kg), including filling / grouting and finishing complete as per direction of
139 Engineer-in-charge. 20123.00 155.00 20278.00 sqm 167.05 3387440.00 11.48.2
600mm x 600mm tiles
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix
of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of
resin per kg), including filling / grouting and finishing complete as per direction of
140 Engineer-in-charge. 38615.00 38615.00 sqm 134.25 5184064.00 11.48.3
800mm x 800mm tiles
Extra over and above C & C router design pattren for Dry sand stone cladding refer
drawing no LKO-INT-08 with all respect as desired as per manufacturer specifications
142 and direction of Engineer in charge.( payment shall be paid of actual area of C & C 3004.00 3004.00 sqm 8517.00 25585068.00 MR
router design pattren.)
Aluminum gutter:
Providing and fixing of 2 mm thick aluminum gutter with double side vulcanised rubber
Expansion joints at every 12m length. Necessary down take spout with diameter upto
150/300 mm at required intervals & other accessories like Cover plate, end caps,
bracket for gutter support as desired spacing and welding at joints. The Girth of gutter
would be upto 4200mm. Dye Penetration test to be conducted wherever aluminum
144 welding has been done complete job with all respect as per detailed drawings and as 1181.00 1181.00 metre 9594.00 11330514.00 MR
per the direction of Engineer-in-charge.
Walkways Sysem:
Supplying & Fixing of safe Walkway system of make Kalzip, Latchways, Capital safety,
Honeywell, Karam, Kartosar or approved equivalent make for safe walking over the roof
on standing seam profile roof system of KALZIP with a seam to seam distance of 400
mm. The Walkways are to be made in FRP/uPVC with aluminum accessories, SS nut-
bolts and fasteners. The system must confirm BS EN 516-2016. The rate includes
supporting equipment such as Ladder/Elevated Works Platform (EWP) /Lifting
tool/Scaffolding etc and as per Technical Specifications for this item as detailed in this
tender. The walkways system shall be manufactured from FRP Pultruded Grating/uPVC
The complete system shall be planned, designed and fixed at site to cater all along the
146 roof periphery like exhaust fan, louvers, skylights and gutters of the roof etc.,complete 820.00 820.00 metre 7538.00 6181160.00 MR
the job with all respect as desired and as per the direction of Engineer-incharge.
Providing and fixing Lloyd Superdeck /LYSAGHT Ezydek or approved equivalent profile
1.2mm thick TCT colour coated galvanized steel having minimum 240-245MPa yield
strength as per IS 513 with a crest height of 44 to 51 at a pitch distance of 130 to
316mm c/c having a cover width of 760 to 960mm. The galvanization shall be
minimum 275 gm per sqcm as per IS 277 with colour coating of polyester quality paint
of 20 microns over the primer coat of 5 microns on the exposed side and 5 microns
alkyde coat over 5 microns primer coat on the inner side/ hot dipped zinc coating of 275
149 gm/sqcm on both sides confirming to AS 1397 and BS EN 10147:2000 complete the job 1500.00 3229.00 4729.00 sqm 2536.00 11992744.00 MR
with all respect as desired and as per the direction of Engineer-incharge..
Providing and fixing roof cutout / sky light /canopy as per drawings with multicell
Polycarbonate sheet as approved make of minimum thickness 20 mm with 5 cells-6 wall
structure having wall flange and supporting wall thickness as per manufacturer
specifications. Extruded translucent panels with vertical standing seam at both sides of
panels with Snap-on connector to interlock the panels with a double tooth grip-lock
mechanism or aluminium system (with top plate and Bottom plate to be fixed with a
self tapping screw) and EPDM gaskets to ensure maximum uplift capability including
End-cap/Aluminium U-Profile (mill finish) for ends. Panels /sheets shall be co-extruded
UV protected with anti-glare color/ coating on one side to prevent glare and shall face
sun/ top. The panels shall be fixed to pre installed structural M.S.frame work and be
secured with snap-on connectors at all levels including all accessories like screws,
washers, flashing, trims etc complete to make a water tight cutout / sky light/canopy
including transportation, lift, scaffolding, etc. conforming to specifications and
directions of Engineer-in-Charge.
The Items includes supplying, Installation and fixing of multicell polycarbonate sheet
150 over structural frame work, Labours, Scaffolding, all required machineries for fixing, 3250.00 3250.00 sqm 4292.60 13950950.00 MR
tools, weather sealants, aluminium channel, screws with pvc fillets, masking tape,
protective tape, backer rods, bolts, gasket, etc. complete in all respect as desired asper
approved drawing/ direction of Engineer in charge.( M.S. Structural steel frame work
shall be paid seperately the respective item.)
Providing and fixing false ceiling at all height including providing and fixing of frame
work made of special sections, power pressed from M.S. sheets and galvanized with
zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle
cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200
mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x
50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of
25x10x0.50 mm of required length with nuts & bolts of required size and other end of
angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the
spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom
wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450
mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate
channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at
every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having
flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with
the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @
230 mm interval, including fixing of gypsum board to ceiling section and perimeter
channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including
jointing and finishing to a flush finish of tapered and square edges of the board with
152 recommended jointing compound , jointing tapes , finishing with jointing compound in 18278.00 18278.00 sqm 806.20 14735724.00 12.45.1
3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable
for board, all as per manufacturer’s specification and also including the cost of making
openings for light fittings, grills, diffusers, cutouts made with frame of perimeter
channels suitably fixed, all complete as per drawings, specification and direction of the
Engineer in Charge but excluding the cost of painting with
12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of
approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of
99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire
Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking
T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized
@120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of
size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm
of length 600 mm to form grid module of size 600x600 mm suspended from ceiling
using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter
M-6 dash fasteners, 6 mm diameter fully threaded hanger rod upto 1000 mm length
and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre
along main ‘T’. The system should rest on periphery walls /partitions with the help of GI
perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed
to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry
154 wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling 2123.00 2123.00 sqm 1783.80 3787007.00 26.27.2
support system shall be prepainted with polyester baked paint, for all heights. The work
shall be carried out as per specifications, drawings and as per directions of the
engineer-in-charge.
With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7)
0.00
TOTAL SUB HEAD -8 0.00 157169451.00 845684437.00
(SH: - 9.0 - FINISHING WORK) 0.00
6 mm plaster on cement concrete or reinforced cement concrete work with white
cement based polymer modified self curing mortar of approved make including groove
159 where ever required as per the direction of Engineer-In-Charge : 37980.00 8609.00 46589.00 sqm 146.45 6822959.00 13.86
Painting with synthetic enamel paint ,having VOC ( Volatile Organic Compound ) content
less than 150 gms/litre, of approved brand and manufacture, including applying
additional coats wherever required to achieve even shade colour.
165 Two or more coats on new work 912.00 196.00 1108.00 sqm 75.00 83100.00 13.84.2
Providing and finishing walls at all heights with textured exterior finish of following
specifications:
i) One coat of priming coat of exterior primer @ 2.20 lit per 10 Sqm.
ii) Application of 2mm thick Texture materials of approved pattern/finish having a
minimum specific gravity of 1.9kg / liter , solid contents in the range of 82-85%.
iii) Final coats (Two or more) of Exterior paint as approved and shade @3.28
167 liters/10sqm.all complete as per specifications and directions of Engineer-In-Charge.. 10913.00 3806.00 14719.00 sqm 150.65 2217417.00 13.45.1
Providing and applying white cement based putty average thickness 1mm minimum
two coat ,of approved brand and manufacturer ,over the plastered wall surface to
prepare the surface even and smooth complete.
168 71951.00 11374.00 83325.00 sqm 87.35 7278439.00 13.80
Wall painting with premium acrylic emulsion paint of interior grade having VOC
( Volatile Organic Compound ) content less than 50grams/litre of approved brand and
manufacturer, including applying additional coats wherever required to achieve even
169 shade colour. 131594.00 131594.00 sqm 71.00 9343174.00 13.83.2
Two or more coats on new work
Finishing walls with Premium Acrylic Smooth exterior paint for all height with silicone
additives of required shade : New work (Two or more coats applied @ 1.43 lit /10 sqm
over and including priming coat of exterior primer applied @ 2.20 kg/10sqm).
170 5457.00 5457.00 sqm 96.80 528238.00 13.47.1
Forming groove of uniform size from 12x12mm and upto 25x18mm in plastered
surface as per approved pattern using wooden battens, nailed to the under layer
including removal of wooden battens, repairs to the edges of plaster panel and
171 finishing the groove complete as per specifications and direction of the Engineer-in- 394782.00 394782.00 metre 71.60 28266391.00 13.76
Charge.
Applying priming coats with primer of approved brand and manufacture, having low
VOC ( Volatile Organic Compound) content with water thinnable cement primer on wall
surface having VOC content less than 50grames/ litre.
172 131594.00 131594.00 sqm 36.95 4862398.00 13.85.3
Providing and applying 12 mm thick (average) premixed formulated one coat gypsum
lightweight plaster having additives and light weight aggregates as vermiculite/ perlite
respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven
173 background such as bare brick/ block/ RCC work on walls & ceiling at all floors and 70556.00 70556.00 sqm 217.35 15335347.00 13.78
locations, finished in smooth line and level etc. complete.
Providing and fixing aluminum work for doors, windows, ventilators and partitions with
extruded built up standard tubular sections/ appropriate Z sections and other sections
of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of
required dia and size, including necessary filling up the gaps at junctions, i.e. at top,
bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminum sections
shall be smooth, rust free, straight, mitred and jointed mechanically wherever required
including cleat angle, aluminum snap beading for glazing / paneling, C.P. brass /
stainless steel screws, all complete as per architectural drawings and the directions of
Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately):
For Openable portion
For shutters of doors, windows & ventilators including providing and fixing hinges/
pivots and making provision for fixing of fittings wherever required including the cost of
178 EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). 1869.00 213.00 2082.00 Kg 452.40 941897.00 21.1.2.3
Polyester powder coated aluminum (minimum thickness of polyester powder coating 50
micron).
Providing and fixing glazing in aluminum door, window, ventilator shutters and
partitions etc. with PVC/neoprene gasket, aluminum snap beading, aluminum channel
etc. complete as per the architectural drawings and the directions of engineer-in-charge
. (Cost of aluminum snap beading, channel shall be paid in basic item)
180 250.00 250.00 sqm 2144.00 536000.00 based on dsr 21.3.3
With toughened float glass panes of 12 mm thick
Filling the gap in between aluminum frame & adjacent RCC/ Brick/ Stone work by
providing weather silicon sealant over backer rod of approved quality as per
181 architectural drawings and direction of Engineer-in-charge complete. 54.00 54.00 metre 62.45 3372.00 21.8
Upto 5mm depth and 5 mm width
Providing and supplying aluminum extruded tubular and other aluminum sections as
per the architectural drawings and approved shop drawings , the aluminum quality as
per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-
80 microns conforming to AAMA 2604 of required colour and shade as approved by the
Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws
183 etc. necessary for fabrication of extruded aluminum frame work. Nothing extra shall be 545985.00 545985.00 Kg 338.25 184679426.00 25.1
paid on this account).
Extra for openable side / top hung vision glass panels (IGUs) including providing and
supplying at site all accessories and hardwares for the openable panels as specified and
of the approved make such as heavy duty stainless steel friction hinges, min 4 -point
cremone locking sets with stainless steel plates, handles, buffers etc. including
necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per
186 the Architectural drawings, as per the approved shop drawings, as specified and as 250.00 250.00 sqm 2941.60 735400.00 25.4
directed by the Engineer- in-Charge.
Extra over and above C & C router design pattren for aluminum composite panel
cladding refer drawing no-LKO-INT-06 with all respect as desired as per manufacturer
189 specifications and direction of Engineer in charge.( payment shall be paid of actual area 4645.00 4645.00 sqm 1079.00 5011955.00 MR
of C & C router design pattren.)
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,
plates etc., including welding, grinding, buffing, polishing and making curvature
(wherever required) and fitting the same with necessary stainless steel nuts and bolts
complete, i/c fixing the railing with necessary accessories & stainless steel dash
fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side
of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for
190 payment purpose only weight of stainless steel members shall be considered excluding 38700.00 38700.00 Kg 472.40 18281880.00 10.28
fixing accessories such as fasteners etc.)..
Providing and fixing 3M™ Scotchal electro cut Dusted /Crystal ( acid -etched look )
7725SE-314/324 Graphic Film over the designated locations shown in the drawing in
192 any design, colour and pattern or as per the direction of the Engineer-In-Charge. 2656.00 2656.00 sqm 2246.00 5965376.00 MR
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved
brand and manufacture, including providing and fixing top & bottom pivot & spring type
fixing arrangement and making necessary holes etc. for fixing required door fittings, all
194 complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to 350.00 350.00 sqm 4608.85 1613098.00 21.18
be paid separately).
Providing and fixing Assa Abloy YEH-01A /DORMA pull Handle TGDI-H 600back to back
with 500mm CTC, adjustable fixing for glass, wood and metal doors in satin stainless
steel grade 304. The pull handles should have supporting washer with raised bevelling
195 on the outer surface. Length =600mm, 32mm dia, -SS304 etc .complete as per direction 100.00 100.00 pair 3674.90 367490.00 Based on 21.12 DSR
of Engineer-in-Charge.
Providing, supplying and fixing of Frameless Swing Glass Door in glazing using 12mm
thick toughened glass as approved make with aluminum rails of 65-100mm high both at
top and bottom as approved comprising of pivot with stainless steel cover including
fixing of pivots floor springs, locks, handles etc. as desired complete with all respects
as per detailed drawings, manufacturers specifications and direction of Engineer in
charge.
Single Leaf:- Swing Glass Door which includes one no. each of fittings such as EPF-
712/PT24 - Top Pivot – 1 nos., EPF-724/ TP/TA - Top rail - 1nos., EPF-725 - Bottom rail
with lock and EPC – 1nos., Yale 'H' Pull Handle YEH-01A (600mm*32mm)/ DORMA
TGDIH 600*32mm – 1 set , Floor spring ASSA ABLOY AF224P/ DORMA BTS 75V with
standard spindle conforming to EN 1154, tested for 500,000 cycles, non-handed unit
suitable for doors up to 150 kg leaf weight, with variable spring strength (size EN 2-4)
and closing speed adjustment 145° -15° & 15°- 0°, fixed hold open at 90° and SS cover
196 plate – 1set . The top/bottom rail shall be of 65-100mm height and 28-40mm thick with 250.00 250.00 sqm 13605.40 3401350.00 MR
SS cover on both sides complete. Featuring hydraulically fully controlled closing cycle
including cement box, Finish : Satin Stainless Steel. The above work complete in all
respect as per approved drawings and to the satisfaction of Engineer-in-Charge .
single leaf door
Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side
& 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet
( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed
Door Shutters. The frame shall be filled with Mineral wool Insulation having density min
96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on
vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening
along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for
fixing of fire rated glazed shutter. The frame shall be finished with a approved fire
198 resistant primer or Powder coating of not less than 30 micron in desired shade as per 246.00 246.00 metre 1260.00 309960.00 9.161
the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded).
Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc.,
with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120
gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm
from the edges and 150 mm c/c , including applying a coat of approved fire resistant
primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic
tape of 5 x 20 mm size etc complete in all respect as per NBC 2016 , IS 16231 ( part-3) :
2016 and as per direction of Engineer-in-charge.
The glass shall be clear, toughened, interlayered, non-wired fire resistant having 11 mm
thickness of approved brand with 120 minutes of fire resistance both integrity &
radiation control (EW120) and minimum 20 min of insulation (EI20) and having a sound
reduction of 37dB and LT of 86%. Glass shall be compliant to class 2(B)2 category of
Impact Resistance as per EN 12600. The glass should be manufactured in UL & TUV
audited Facility and including UL-EU Certification.The maximum glazing size cannot be
199 more than 1100 mm x 2200 mm (w x h) or 2.42 sq mts in total area. The test report for 146.00 146.00 sqm 34058.90 4972599.00 9.164
the complete system (Glazed Door or Partition) will be considered valid only if it
contains the stamp
and signature of the authorized signatory from the glass manufacturer. (Actual glass size
is to be measured at site for payments). .
Floor Mounted Trolley Fender : Fabrication, supply & installation of top mounted SS 304
grade floor mounted guard railing of Dorma/Ozone/ Rinox or Equivalent make 300 mm
high as per drawing made of 38 x 1.5 mm thk. SS tube mounted with SS modular laser
cut vertical of 54 x 12 mm thk. mounted on SS base plate of dia. 95 x 6 mm thk. fixed
with the help of M8 CSK head anchors as per vendor detail. Vertical are spaced @ 1.5
mtr. regular intervals. All SS components are in SS 304 grade with satin finish, made by
using modern, automatic machines like CNC machine, laser cutting, water jets etc. The
rate shall includes cost & conveyance of materials, base plate screws, bolts, fabrication,
any locking arrangements, transportation,cutting & making good the floor/walls,
loading & unloading, handling of machineries all electrical charges etc. labour charges ,
201 all leads and lift etc. complete as directed by engineer incharge. (Please note that no 4939.00 4939.00 Metre 4180.00 20645020.00 MR
welding of SS pipes will be allowed and work shall be done by a specialized agency on
modular and component basis).
Wall Mounted Trolley Fender : Fabrication, supply & installation of top mounted SS 304
grade wall mounted guard railing of Dorma/Ozone / Rinox / DLine or Equivalent make
as per drawing made of 38 x 1.5 mm thk. SS tube mounted with SS modular laser cut
vertical of 54 x 12 mm thk. mounted on SS base plate of dia. 95 x 6 mm thk. fixed with
the help of M8 CSK head anchors as per vendor detail. Vertical are spaced @ 1.5 mtr.
regular intervals. All SS components are in SS 304 grade with satin finish, made by
using modern, automatic machines like CNC machine, laser cutting, water jets etc. The
rate shall includes cost & conveyance of materials, base plate screws, bolts, fabrication,
any locking arrangements, transportation,cutting & making good the floor/walls,
loading & unloading, handling of machineries all electrical charges etc. labour charges ,
202 all leads and lift etc. complete as directed by engineer incharge. (Please note that no 4939.00 4939.00 Metre 5551.00 27416389.00 MR
welding of SS pipes will be allowed and work shall be done by a specialized agency on
modular and component basis).
Providing ,supply & fixing 1.5mm thick self adhesive membrane with cross laminated
HDPE, Bituthene CP Grace / Proofex GP Fosroc/ Colphene-3000 on horizontal surface ,
Elongation ( ASTM D638 )- minimum 200%,Puncture resistance ( ASTM E154) minimum
200N, of approved make shall be fixed with leveling surface. The membrane should be
designed to be applied in elevated temperatures of 55 deg C and should confirm to BS
8102:2009. Adjacent sheet shall be laid in similar manner with overlaps as per system
requirement. The overlap joint shall be cleaned and sealed as per manufacturer's
specification, sealing corners, pile heads, and drains etc. or as desired side requirement
and direction of Engineer in charge.
Note :-
(The all above operation excluding 25mm thcik CC 1:2:4 screed for protection layer
before laying reinforement and concrete .) Contractor shall give 10 years guarantee for
209 water proofings.The work shall be executed by authorized / manufacturer approved 50905.00 50905.00 sqm 788.00 40113140.00 MR
applicator.
Note : Material to be supplied with original manufacturer's Data sheet, Lable, MTC and
Method statement. The client has right to inspect the manufacturing facility of the
original manufacturer.
Note : All water proofing work ,Contractor shall give 5 years guarantee for water
proofings. 0.00
TOTAL SUB HEAD -11 0.00 19099618.00 64497070.00
0
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm
to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the
material with water at OMC in for all leads & lifts, laying in uniform layers with
mechanical paver finisher in sub- base / base course on well prepared surface and
218 compacting with vibratory roller of 8 to 10 tonne capacity to achieve gap the desired 10128.80 1277.33 11406.13 cum 2132.25 24320722.00 16.79
density, complete as per specifications and directions of Engineer-in-Charge.
Construction of dry lean cement concrete sub base over a prepared subgrade with
coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not
exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after
blending to be as per specifications, cement content not to be less than 150 Kg/cum,
optimum moisture content to be determined during trial length construction, concrete
strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to
219 site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne 7597.00 7597.00 cum 3331.95 25312824.00 16.80
vibratory roller, finishing and curing etc. complete as per direction of Engineer-in
charge.
Laying and spreading a layer of sand 6 mm thick (average) over dry rolled lean concrete
layer including the cost of sand but including removal of pebbles, rubbish etc. by
220 screening if required etc complete, as directed by the Engineer in charge. 304.00 304.00 cum 917.75 278996.00 2.27
Providing and laying transparent Ist quality polythene sheet separation membrane of
400 microns thick on the base course with overlaps of not less than 100mm
221 longitudinally and 150mm transversely as per specification and as directed by 50644.00 50644.00 sqm 82.00 4152808.00 MR
Engineer-in-charge.
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from
batching plant. The ready mixed concrete shall be laid and finished with screed board
vibrator , vacuum dewatering process and finally finished by floating, brooming with
wire brush etc. complete as per specifications and directions of Engineer-in charge.
225 (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement 9004.00 9004.00 cum 6912.15 62236999.00 16.75
used as per design mix is payable/ recoverable separately).
Providing and laying 60mm thick factory made cement concrete interlocking paver block
of M -30 grade made by block making machine with strong vibratory compaction and of
approved size and design/ shape laid in required colour and pattern over and including
50mm thick compacted bed of course sand, filling the joints with fine sand etc. Pavers
227 without edge to be packed with cement mortar in order to hold sand bed all complete 8792.00 267.00 9059.00 sqm 615.70 5577626.00 16.68
as per the direction of Engineer-in-charge.
Providing and laying at or near ground level factory made kerb stone of M-25 grade
cement concrete in position to the required line, level and curvature, jointed with
cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without
grooves (thickness of joints except at sharp curve shall not to more than 5mm),
including excavation ,making drainage opening wherever required complete etc. as per
direction of Engineer-in-charge (length of finished kerb edging shall be measured for
228 payment). 613.00 613.00 cum 5012.65 3072754.00 16.69
(Precast C.C. kerb stone shall be approved by Engineer-in-charge).
Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement
concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size)
over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated
229 and grouted with fine sand, including finishing the top smooth etc. complete and as per 1917.00 1917.00 sqm 382.05 732390.00 16.63
direction of Engineer-in-charge.
Providing and laying 70mm thick factory made cement concrete grass grid pavers block
of M -30 grade made by block making machine with strong vibratory compaction, of
approved size, design & shape, laid in required colour and pattern over and including
230 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all 4396.00 4396.00 sqm 1562.00 6866552.00 16.63
complete as per the direction of Engineer-in-charge.
Providing and applying 2.5 mm thick road marking strips ( retro-reflective) of specified
shade/ colour using hot thermoplastic material by fully/semi automatic thermoplastic
paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank
heater and profile shoe heater, driven by experienced operator on road surface
including cost of material, labour, T&P, cleaning the road surface of all dirt, seals,
oil,grease and foreign material etc. complete as per direction of Engineer-in-charge and
accordance with applicable specifications.
231 2500.00 2500 Sqm 391.00 977500.00 16.62
Free float bearing-155 MT-Supplying, fitting/fixing in position true to line and level POT-
PTFE bearing make Sanfield, Mageeba, Metco or approved consisting of a metal piston
supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing
rings, dust seals, PTFE surface sliding against stainless steel mating surface, completre
assembly to be of cast steel/fabricated structural steel, metal and elastomer elements
to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400,
232 section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete as per drawing and 604.00 604.00 each 23834 14395736.00
approved technical specifications.
N.S.
16.36.1
Providing and laying bitumen mastic wearing course ( as per specifications) with
industrial bitumen of grade 85/25 confirming to IS : 702, prepared by using mastic
cooker and laid to required level and slope, including providing antiskid surface with
bitumen precoated fine grained hard stone chippings of approved size at the rate of
0.005 cum per 10 sqm and at approximate spacing of 10 cm centre to centre in both
directions, pressed into surface protruding 1 mm to 4 mm over mastic surface, including
235 cleaning the surface, removal of debries etc. all complete. ( Considering bitumen using 17617.00 17617.00 sqm 491.75 8663160.00
10.2% as per MORTH Specification)
25 mm thick
16.37.1
Providing and applying tack coat using bitumen emulsion confirming to IS : 8887, using
emulsion pressure distributer including preparing the surface & cleaning with
mechanical boom.
236 With rapid setting bitumen emulsion 4641.00 4641.00 sqm 13.10 60797.00
on W.B.M. / W.M.M. @ 0.4kg/sqm
16.31.1.1
Providing and appluing tack coat using bitumen emulsion confirming to IS : 8887, using
emulsion pressure distributer including preparing the surface & cleaning with
mechanical boom.
237 With rapid setting bitumen emulsion 17617.00 17617.00 sqm 8.65 152387.00
on bitumen surface @ 0.25kg/Sqm
16.31.1.2
Providing and laying bituminous macadam using crushed stone aggregates of specified
grading premixed with bituminous binder, transported to site by tippers, laid over a
previously prepared surface with paver finisher equipped with electronic sensor to the
required grade, level and alignment and rolling with smooth wheeled vibratory and
tandem rollers as per specifications to achieve the desired compaction and density,
complete as per specifications and directions of Engineer-in-charge.
238 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.5% 1.00 1.00 cum 5708.05 5708.00
(percentage by weight of total mix) prepared in Batch type Hot Mix Plant of 100 to 120
TPH capacity.
16.55.1
16.54.1
Providing and laying Bituminous concrete using crushed stone aggregates of specified
grading premixed with bituminous binder and filler, transporting the hot mix to site by
tippers, laying with power finisher equipped with electronic sensor to the required
grade, level and alignment and rolling with smooth wheeled vibratory and tandem
rollers as per specifications to achieve the desired compaction and density, complete as
per specifications and directions of Engineer-in-charge.
40/50 mm compacted thickness with bitumen of grade VG-30 @5. 5% (percentage by
240 weight of total mix) and lime filler @3% ( percentage by weight of Aggregate)prepared 1.00 1.00 Cum 7863.85 7864.00
in Batch type Hot Mix Plant of 100 to 120 TPH capacity.
16.57.1
Drainage Spouts in Superstructure including providing drip mouldings and also including
supplying, fitting and fixing approved type of materials complete as per drawing and
241 Technical specification vide clause no. 2705 of MoRT&H’s Specification for Road & 280.00 280.00 each 360.00 100800.00
Bridge Works.
NS
Providing, fixing, testing and commissioning of UPVC rain water pipes (IS : 4985-1983,
6.00 Kg/cm2 pressure rating) including injection moulded fittings (heavy duty) (plain or
door) e.g. bends, junction, cowls, tees, offsets, access pieces etc. Clamps/Supports
242 jointing with rubber ring/solvent cement joints including cutting chase or holes in walls 1680.00 1680.00 meter 360.00 604800.00
and floors and making good as required at Site. 110mm dia pipe
NS
TOTAL SUB HEAD -12 0.00 243779686.00 43977738.00
0
0.00
SUB-HEAD: 13: LANDSCAPING WORKS (PLANTING) 0.00
Clearing grass and removal of the rubbish up to a distance of 50m outside the
243 periphery of the area cleared. 82079.00 82079.00 Sqm 3.65 299588.00 2.32
Trenching in ordinary soil up to a depth of cm including removal and stacking of
serviceable materials and then disposing of surplus soil , by spreading and neatly
leveling within a lead of 50 m and making up the trenched area to proper levels by
244 filling with earth or earth mixed with sludge or/ and manure before and after flooding 49247.40 49247.40 Cum 45.85 2257993.00 2.10
trench with water (excluding cost of imported earth , slude or manure).
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with
manure or sludge in the ratio of 2:1 by volume (2 part of stacked volume of earth after
reduction by 20% :1 part of stacked volume of manure after reduction by 8%) flooding
with water, dressing including removal of rubbish and surplus earth, if any with all leads
246 and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) 1931.00 1931.00 each 236.75 457164.00 2.14.1
Holes 120 cm dia , and 120 cm deep
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with
manure or sludge in the ratio of 2:1 by volume (2 part of stacked volume of earth after
reduction by 20% :1 part of stacked volume of manure after reduction by 8%) flooding
with water, dressing including removal of rubbish and surplus earth, if any with all leads
247 and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) 17747.00 17747.00 each 31.15 552819.00 2.14.3
Holes 60 cm dia , and 60 cm deep
Supplying and stacking of Good earth at site including royalty and carriage with all lead
248 and lifts, (earth measured in stacks will be reduced by 20% for payment). 39163.71 39163.71 Cum 332.55 13023893.00 2.20
Supplying and stacking of cow dung manure/cattle manure at site including cost and
249 carriage with all lead and lifts, (manure measured in stacks will be reduced by 8% of 5623.93 5623.93 Cum 189.10 1063485.00 2.25
payment)
Spreading of sludge,dump manure or/ and good earth in required thickness (cost of
253 sludge dump manure or/ and good earth to be paid separately) 39163.71 39163.71 Cum 30.95 1212117.00 2.80
Flooding the ground with water including making Kiaries and dismantelling the same
255 82079.00 82079.00 per sqm 1.45 119015.00 2.24
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water
256 including disposal of uprooted vegetation. 82079.00 82079.00 per sqm 35.75 2934324.00 2.12
Removal of garden rubbish including building rubbish, earth with or / and mulba
259 excavated by mechanial transport with all lead and lift. 300.00 300.00 per trip 1800.00 540000.00 MR
Supplying of selection no-1 in turf form at site of work lush green, free from weeds
260 with good and healthy i/c loading and un loading with all leads and lifts. 65843.00 65843.00 per sqm 80.00 5267440.00 MR
Preparation of mounds of various size and shape by available excavated /supplied earth
in layers not exceeding 20 cm in depth, breaking clods,watering of each layer, dressing
261 etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in- 4378.80 4378.80 Cum 250.00 1094700.00 2.28
charge.
NOTE:- Providing and display of (New integrated passenger terminal building at C.C.S.
International Airport,Lucknow) following plant details as per given below . All supplied
plants are well developed and as per directed by officer in charge. 0.00
0.00
TREE ( Stem height to be considered for height) 0.00
Anthecophalus cadamba having height of 10-12ft stright & sturdy branches big poly
bag well developed.
262 50.00 50.00 Each 800.00 40000.00 MR
Azadirachta indica having height of 10-12ft stright & sturdy branches big poly bag well
developed.
263 10.00 10.00 Each 800.00 8000.00 MR
Bombax Malabaricum having height of 10-12ft stright & sturdy branches big poly bag
well developed.
264 10.00 10.00 Each 800.00 8000.00 MR
Bauhinia Blackie having height of 10-12ft stright & sturdy branches big poly bag well
developed.
265 20.00 20.00 Each 1500.00 30000.00 MR
Butea frondosa having height of 10-12ft stright & sturdy branches big poly bag well
developed.
266 20.00 20.00 Each 1500.00 30000.00 MR
Chukrasia Tabularis having height of 10-12ft stright & sturdy branches big poly bag well
developed.
267 9.00 9.00 Each 800.00 7200.00 MR
Cassia Fistula having height of 10-12ft stright & sturdy branches big poly bag well
developed.
268 250.00 250.00 Each 600.00 150000.00 MR
Chorisia speciosa having height of 10-12ft stright & sturdy branches big poly bag well
developed.
269 25.00 25.00 Each 600.00 15000.00 MR
Callistemon lanceolatus having height of 10-12ft stright & sturdy branches big poly bag
well developed.
270 19.00 19.00 Each 450.00 8550.00 MR
Delonix regia having height of 10-12ft stright & sturdy branches big poly bag well
developed.
272 18.00 18.00 Each 450.00 8100.00 MR
Erythrina Indica having height of 10-12ft stright & sturdy branches big poly bag well
developed.
273 21.00 21.00 Each 600.00 12600.00 MR
Ficus Lyrata having height of 4-6 ft stright & sturdy branches big poly bag well
developed.
274 150.00 150.00 Each 1500.00 225000.00 MR
Ficus virens having height of 10-12ft stright & sturdy branches big poly bag well
developed.
275 125.00 125.00 Each 1000.00 125000.00 MR
Ficus infectoria having height of 10-12ft stright & sturdy branches big poly bag well
developed.
276 110.00 110.00 Each 1000.00 110000.00 MR
Jacaranda mimosaefolia having height of 10-12ft stright & sturdy branches big poly bag
well developed.
277 21.00 21.00 Each 800.00 16800.00 MR
Lagerstroemia speciosa having height of 10-12ft stright & sturdy branches big poly bag
well developed.
278 19.00 19.00 Each 750.00 14250.00 MR
Lagerstroemia Floribunda having height of 10-12ft stright & sturdy branches big poly
bag well developed.
279 47.00 47.00 Each 750.00 35250.00 MR
Mangifera Indica having height of 10-12ft stright & sturdy branches big poly bag well
developed.
280 15.00 15.00 Each 600.00 9000.00 MR
Plumeria alba multi branched in height 6-8ft in poly bag well developed.
281 250.00 250.00 Each 1500.00 375000.00 MR
Plumeria Acutifolia multi branched in height 6-8 ft in poly bag well developed.
282 140.00 140.00 Each 1500.00 210000.00 MR
Salvadora oleoides having height of 10-12ft stright & sturdy branches big poly bag well
developed.
283 16.00 16.00 Each 750.00 12000.00 MR
0.00
PALM ( Stem height to be considered for height)
0.00
Foxtail (palm) having height of 7-8 ft trunk with 60-70 leves well developed in big
284 container pot bond condition. 15.00 15.00 Each 4000.00 60000.00 MR
Kentia palm having height of 8-10ft trunk with 60-70 leves well developed in big
286 container pot bond condition. 15.00 15.00 Each 3000.00 45000.00 MR
Phoenix sylvestrix (date palm) having height of 8-10ft trunk with 60-70 leves well
287 developed in big container pot bond condition. 136.00 136.00 Each 12000.00 1632000.00 MR
Ptychosperma macarthurii having height of 8-10ft trunk with 60-70 leves well
288 developed in big container pot bond condition. 162.00 162.00 Each 8000.00 1296000.00 MR
Roystonea Regia having height of 8-10ft trunk with 60-70 leves well developed in big
289 container pot bond condition. 102.00 102.00 Each 8000.00 816000.00 MR
Washingtonia filifera (palm) having height of 6-8ft trunk with 60-70 leves well
290 developed in big container pot bond condition. 88.00 88.00 Each 10000.00 880000.00 MR
Washingtonia Robusta (palm) having height of 6-8ft trunk with 60-70 leves well
291 developed in big container pot bond condition. 26.00 26.00 Each 8000.00 208000.00 MR
ORNAMENTAL PLANT
Areca palm ht of plants 90-120 cm with 60-70 leaves in in big size polybag well
292 developed. 777.00 777.00 Each 900.00 699300.00 MR
Chamaedorea elegans ht of plants 90-120 cm with 60-70 leaves in in big size polybag
293 well developed. 1365.00 1365.00 Each 900.00 1228500.00 MR
Cycas circinalis having trunk ht of 100-120 cm disease free fresh leaves in big size
294 polybag well developed. 225.00 225.00 Each 4500.00 1012500.00 MR
Casuarina topiary multi ball topiary well branched (bushy) of height 150-180 cm in big
295 size polybag well developed. 50.00 50.00 Each 1500.00 75000.00 MR
Cycus revoluta having trunk ht of 45-60 cm with 75-90 disease free fresh leaves in big
296 size polybag well developed. 380.00 380.00 Each 4500.00 1710000.00 MR
Ficus Microcarpa multi ball topiary well branched (bushy) of height 150-180 cm in big
297 size polybag well developed. 50.00 50.00 Each 1500.00 75000.00 MR
Melaleuca topiary single ball topiary well branched (bushy) of height 150-180 cm in big
298 size polybag well developed. 50.00 50.00 Each 1500.00 75000.00 MR
Phoenix roebelenii having trunk of 60-75 cm with 45 leaves in big size gunnybag well
300 developed. 90.00 90.00 Each 2000.00 180000.00 MR
0.00
Shrubs plant
0.00
Hamelia dwarf bushy ht of plants 35-45 cm in big size polybag well developed.
309 2291.00 2291.00 Each 70.00 160370.00 MR
Hibiscus pink tips ht of plants 50-60 cm in big size polybag well developed.
310 250.00 250.00 Each 100.00 25000.00 MR
Nerium oleander dwarf ht of plants 90-100 cm in big size polybag well developed.
316 201.00 201.00 Each 150.00 30150.00 MR
Yucca sylvestrix well branched (bushy) of height 50-60 cm in poly bag of 30 cm size
gunnybag well developed.
321 50.00 50.00 Each 300.00 15000.00 MR
Yucca elephantipes well branched (bushy) of height 90-120 cm in poly bag of 30 cm size
gunnybag well developed.
322 50.00 50.00 Each 300.00 15000.00 MR
325 Dracaena pleomele reflexa ht of plants 30-45 cm in poly bag. (11 Nos./sqmt) 150.00 150.00 sqm 1500.00 225000.00 MR
Dracaena variegated tricolour ht of plants 30-45 cm in poly bag . (11 Nos./sqmt)
326 150.00 150.00 sqm 1500.00 225000.00 MR
Ficus longisland well developed of height 30-40 cm in poly bag of size 20 cm. (11
327 Nos./sqmt) 2500.00 2500.00 sqm 1200.00 3000000.00 MR
Ficus reginald well developed of height 30-40 cm in poly bag of size 20 cm. (11
328 Nos./sqmt) 448.00 448.00 sqm 1200.00 537600.00 MR
329 Heliconia ht of plants 30-45 cm in polybag (11 Nos./sqmt) 484.00 484.00 sqm 1500.00 726000.00 MR
330 Hamelia Patens well developed of height45-60cm in polybag (11 Nos./sqmt) 1225.00 1225.00 sqm 800.00 980000.00 MR
Iresine well developed of height 15-30 cm in poly bag of size 20 cm (24 Nos./sqmt
331 150.00 150.00 sqm 800.00 120000.00 MR
Clerodendron inerme well developed of height 15- 30 cm in big poly bag (24 Nos./sqmt)
332 1523.00 1523.00 sqm 600.00 913800.00 MR
333 Lantana Sellowiana of height 30-45 cm in polybag. (11Nos./sqmt) 1218.00 1218.00 sqm 600.00 730800.00 MR
334 Lantana camara of height 30-45 cm in polybag. (11Nos./sqmt) 250.00 250.00 sqm 800.00 200000.00 MR
335 Ophiopogon well developed of height 15-20 cm in polybag (24 Nos./sqmt) 443.00 443.00 sqm 800.00 354400.00 MR
336 Philodendron selloum of height 30-45 cm in in polybag (11 Nos./sqmt) 588.00 588.00 sqm 1200.00 705600.00 MR
337 Syngonium white butterfly of height 15-30 cm in polybag. 24 Nos./sqmt) 458.00 458.00 sqm 800.00 366400.00 MR
338 Spathiphyllum of height 15-30 cm in polybag. (11 Nos./sqmt) 458.00 458.00 sqm 1300.00 595400.00 MR
Red Fountain grass well develope of height 15-30 cm in polybag (11 Nos./sqmt)
339 1071.00 1071.00 sqm 1200.00 1285200.00 MR
342 Wedelia well developed of height 15-20 cm in polybag (24 Nos./sqmt) 248.00 248.00 sqm 1000.00 248000.00 MR
Yellow Fountain grass well develope of height 15-30 cm in polybag (11 Nos./sqmt)
343 1402.00 1402.00 sqm 1000.00 1402000.00 MR
347 Supply of decorative pots (Yucaabe) 30" high , 30" dia (Basic Cost Rs.5000/-) 100.00 100.00 nos 5000.00 500000.00 MR
348 Supply of decorative pots (Yucaabe) 48" high , 20" dia (Basic Cost Rs.7500/-) 100.00 100.00 nos 7500.00 750000.00 MR
349 Supply of decorative pots (Yucaabe) 1200 dia (Basic Cost Rs.9900/-) 100.00 100.00 nos 10000.00 1000000.00 MR
Rocks Setting
Providing and laying of Rocks of different sizes ( 20% of total qty in 2400 mm to 3000
mm in length in one side, 30% of total qty in 1200 mm to 1500 mm and 50% of total
qty in 600 mm to 1000 mm one side ) brought from outside and to be set with
mechanically or manual means in areas as per drawings or instruction of engg in charge.
350 62.05 62.05 Ton 3000.00 186144.00 MR
The setting should meet approval of engineer in charge and architect. (Basic Cost
Rs.3000/ ton)
Plantation of Trees & shrubs plant at site i/c watering and removal of unsaverieable
351 material's as per direction of officer in charge (excluding cost of plant & water) 19678.00 19678.00 Nos 6.00 118068.00 MR
Plantation of Ground Covers plant at site i/c watering and removal of unsaverieable
352 material's as per direction of officer in charge (excluding cost of plant & water) 16236.00 16236.00 Sqm 58.00 941688.00 MR
Maintenance Schedule
Providing and Fixing Concealed in wall Flushing Cistern with dual flush Actuator Plate
(plastic body in approved finish), flush-stop function, noise less float valve and fast filling
action with all component parts of high quality including fixing frame and set complete
in all respects as per direction of the engineer-in-charge
362 Make: (Kohler 77027IN-P-NA + 5413IN-P-CP), (Hindware Concealo), (Jaquar JCS-WHT- 237 8 245.00 Each 9181.00 2249345.00 MR
2400S)
Providing and Fixing vitreous china urinal with C.I. hangers, 15mm dia inlet to built in
spreaders with inbuilt waste with C.P flange, complete including cutting and making
good the walls and floors wherever required
Make: (Kohler Cat No: 5017IN-ER-0), (Hindware Senso art 60018), Jaquar URS-WHT-
364 132530) 117 10 127.00 Each 8669.00 1100963.00 MR
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size
75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of
appropriate width with chase cutter and embedding the stone in the chase with epoxy
grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
366 aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished 191 18 209.00 Sqm 2831.95 591877.55 8.10.2
smooth.
Granite Stone of approved shade
Providing and fixing Janitor sink with C.I. brackets, C.P. brass chain with rubber plug, 40
mm C.P. brass waste complete, including painting the fittings and brackets, cutting and
367 making good the walls wherever required: 23 1 24.00 Each 2433.25 58398.00 DSR 17.9.1
White glazed fire clay Janitor sink of size 600x450x 250mm
Providing and Fixing stainless steel sink double bowl single drain board Size 1740x515
mm with C.I. brackets, 40mm C.P. waste,C.P. brass chain and rubber plug, CP Brass
Waste coupling and C.P. wall flange rubber adapter for waste connection complete
including cutting and making good the walls wherever required.
368 Make: (NeelKanth Cat No: NK DBSD 12 G/M), (Jayna DBSD 02(DX) 3 2 5.00 Each 9414.44 47072.00 MR
Providing and Fixing 15 mm nominal bore CP Brass short body bib cock complete
including cutting and making good the walls wherever required.
Make: (Kohler Cat No:16093IN-4-CP), (Hindware Contessa F330041), (Jaquar FLR-CHR-
369 5047N) 237 8 245.00 Each 596.57 146160.00 MR
Providing and Fixing 15 mm nominal bore CP Brass long body bib cock complete
including cutting and making good the walls wherever required
370 Make: (Hindware Immacula F110002), (Jaquar CON-CHR-107KN), (CERA F2006152) 166 2 168.00 Each 1224.24 205673.00 MR
Providing and Fixing CP Towel Rail fixed to PVC cleats with C.P. brass screws including
371 cutting and making good the walls wherever required 4 1 5.00 Each 1220.83 6104.00 MR
Make: (Kohler K-97495T-CP) , (Jaquar ACN 1111NM), (Cera F5003103)
Providing and fixing SS liquid soap dispenser with push lever assembly with soap refill
fixed in wall with Screws complete in all respect as per direction of the engineer-in-
charge
373 Make: (Kohler Cat No:5487K-CP), (EURONICS ES-09), (Jaquar ACN-CHR-1137N) 315 9 324.00 Each 2879.17 932851.00 MR
Providing and fixing CP Brass Bottle Trap of approved quality & make and as per the
direction of Engineering- charge
374 Make: (Kohler Cat No: 7314IN-CP), (Hindware F850015), (Jaquar ALD CHR- 462 25 487.00 Each 995.74 484925.00 MR
769L300X190)
Providing and fixing C.P. brass angle valve quarter turn of approved quality conforming
to IS:8931
15mm nominal bore
375 Make: (Kohler Cat No: 80154IN-4-CP), (Hindware Cat No: F310003), (Jaquar FLR-CHR- 795 33 828.00 Each 1131.76 937095.92 MR
5053N)
Providing and fixing Jumbo toilet paper holder including cutting and making good the
376 walls wherever required 237 8 245.00 Each 915.46 224286.84 MR
Make: (EURONICS Cat no: EJ01), (Dolphy make)
Providing and fixing S.S. body tissue paper dispenser complete including cutting and
making good the walls wherever required
Make: (Kohler Cat No: 5633IN-CP), (EURONICS EP 01), (UTEC UT-TVB 4000)
377 86 2 88.00 Each 1554.87 136828.00 MR
Providing and fixing Health faucet with 1 metre long Flexible Tube and CP wall hook
with PVC & SS Screws including cutting and making good the wall wherever required
complete as directed by the Engineer-in-charge
378 Make: (Kohler Cat No:12927IN-CP), (Hindware "F160068"), (Jaquar ALD-CHR-577) 237 8 245.00 Each 828.38 202952.79 MR
Providing and fixing C.P Single lever concealed diverter for bath and shower with Button
at Top complete as directed by Engineer-in-charge
Make: (CERA F1014702 F4010103), (Hindware Divertor F850090 & F110042), (Jaquar
379 ALD-CHR-065 & FLR-CHR-5065K) 4 1 5.00 Each 3963.06 19815.00 MR
Providing and Fixing CP Bath spout with wall flange complete as directed by Engineer-
in-charge
381 Make: (Kohler Cat No: 8160IN-CP), (Hindware Immacula Series F110023), (Jaquar SPJ- 4 1 5.00 Each 1147.44 5737.21 MR
CHR-429)
Providing and fixing C.P. brass stop cock (concealed) of standard design and of
approved make conforming to IS:8931.
382 15 mm nominal bore 8 2 10.00 Each 545.95 5459.50 18.52
Providing and Fixing CP Hinged Arms (Sliding rail) for Handicapped Toilet with SS Screws
over Rawl Plugs complete as per instructions of the engineer-in-charge
384 Make: (Jaquar SHA-1187N) 30 30.00 Each 7623.10 228693.03 MR
Providing and Fixing straight / offset type flexible single body push fit type WC pan
connector with inlet ring and integral single mould sealing fins made of flexible EVA
body to be fixed with manufacture supplied grease, including rubber bush / adaptor for
385 use with C.I pipe as supplied with the pan connector complete as directed by Engineer- 237 8 245.00 Each 1579.18 386899.52 MR
in-charge
Make: (Geberit make), (Viega make),
Providing and fixing C.P cast brass Double coat hook as approved with C.P. brass screws
complete as per instructions of the engineer-in-charge.
386 Make: (Kohler 15247IN-CP), (Hindware Contessa F880004), (Jaquar ACN-CHR-1161N) 237 8 245.00 Each 676.81 165817.34 MR
Providing and Fixing central hole C.P. brass Sink Mixer including cutting and making
good the walls wherever required complete in all respects as per direction of the
Engineer-in-charge
387 Make: (Kohler 37315IN-4-CP), (Hindware Immacula F110020), (Jaquar SOL-CHR-6309) 6 3 9.00 Each 3823.32 34409.86 MR
Providing and fixing automatic sensor faucet for cold water, for wash basin complete
in all respect including basin mounted auto tap, with infrared sensors with solenoid
valves for cold water with electronic circuit and necessary accessories including cutting
and making good the walls and floors as per requirement and as per approved
388 manufacturer’s make or equivalent 315 11 326.00 Each 8517.40 2776671.38 MR
Make: (Kohler Cat No: 18057IN-ND-CP), (Hindware F240001), (Jaquar SNR-CHR-51021)
Providing and Fixing C.P brass Aerosol perfume dispenser, fixed to wooden cleats / Rawl
Plug with C.P brass screws, complete including cutting and making good the walls
389 wherever required 237 8 245.00 Each 2649.50 649128.40 MR
Make: (EURONICS EA-03), (UTEC UT-630)
Providing on Fixing 'C' Class heavy duty 150 mm dia Mild Steel pipes conforming to IS-
1239 including cutting, welding, nut-bolts, gasket, fitting viz. bends, tees, reducers,
crosses, flanges etc. and fixing the pipes on wall / ceiling / beam / floor with suitable
MS clamps / structural supports/PCC block and painting two coats of red oxide primer
390 and two coats of synthetic enamel paint of approved shade complete as required and 150 150.00 metre 2507.53 376129.32 MR
as specified. ( For terrace rain water system)
Providing on Fixing 'C' Class heavy duty 200 mm dia Mild Steel pipes conforming to IS-
3589 of thickness 6.3 mm including cutting, welding, nut-bolts, gasket, fitting viz. bends,
tees, reducers, crosses, flanges etc. and fixing the pipes on wall / ceiling / beam / floor
with suitable MS clamps / structural supports/PCC block and painting two coats of red
oxide primer and two coats of synthetic enamel paint of approved shade complete as
391 required and as specified. ( For terrace rain water system) 300 300.00 metre 3727.23 1118169.42
Providing on Fixing 'C' Class heavy duty 300 mm dia Mild Steel pipes conforming to IS-
3589 of thickness 6.3 mm including cutting, welding, nut-bolts, gasket, fitting viz. bends,
tees, reducers, crosses, flanges etc. and fixing the pipes on wall / ceiling / beam / floor
with suitable MS clamps / structural supports/PCC block and painting two coats of red
oxide primer and two coats of synthetic enamel paint of approved shade complete as
393 required and as specified. ( For terrace rain water system) 1050 1050.00 metre 5268.95 5532393.94
Providing and Fixing 100 mm dia Hubless centrifugally cast (spun) iron pipes epoxy
coated inside & outside IS:15905
394 7046 100 7146.00 metre 925.55 6613980.30 17.35.1.3
Providing and fixing 100mm dia. M.S. holder-bat clamps of approved design to Sand
Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks
10X10X10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm
395 nominal size) including cost of cutting holes and making good the walls etc. 1485 15 1500.00 Each 167.35 251025.00 17.37.1
Providing and fixing 100mm dia Bend of required degree with access door for Hubless
396 centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 , insertion 237 8 245.00 Each 489.45 119915.25 17.38.1.3
rubber washer 3mm thick, bolts and nuts complete
Providing and fixing 100mm dia Plain Bend of required degree for Hubless centrifugally
397 cast (spun) iron pipes epoxy coated inside & outside IS:15905 237 8 245.00 Each 307.10 75239.50 17.39.1.3
Providing and fixing single equal plain junction of required degree for Hubless
398 centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 : 729 15 744.00 Each 503.40 374529.60 17.44.1.3
Providing and Fixing double equal plain junction of 100x100x100x100 mm size for
399 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 69 5 74.00 Each 645.10 47737.40 17.42.1.3
Providing and fixing 100mm dia door piece, insertion rubber washer 3 mm thick, bolts
400 and nuts Centrifugally cast (spun) iron S&S IS: 3989 complete 120 10 130.00 Each 512.65 66644.50 17.55.1.2
Providing and Fixing 100 mm dia Terminal guard for Hubless centrifugally cast (spun)
401 iron epoxy coated inside & outside as per IS:15905 120 5 125.00 Each 355.85 44481.25 17.56.1.3
Providing and fixing shielded coupling for Hubless centrifugally
402 cast iron pipe 100 mm dia for SS 304 grade coupling with EPDM rubber gasket 3480 50 3530.00 Each 360.50 1272565.00 17.57A.1
Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun)
403 iron pipes of diameter: 1235 15 1250.00 Each 62.00 77500.00 17.59.1
100mm
Providing and Fixing 100 mm inlet and 100 mm outlet for Hubless centrifugally cast
(spun) iron epoxy coated inside & outside as per IS:15905 of self cleansing design with
404 screwed down or hinged grating with or without vent arm complete, including cost of 483 20 503.00 Each 677.60 340832.80 17.60.1.3
cutting and making good the walls and floors.
Providing and Fixing G.I. Reducing elbow of 100 x 50 mm in cement concrete 1:2:4 at all
levels for floor drains (exlcuding cost of grating) for connection to floor traps in sunken
405 portions, complete as per drawings and as per approval of the engineer-in-charge. 144 8 152.00 Each 2171.65 330091.06 MR
Providing and Fixing 40 mm dia G.I. pipe complete with G.I. Fittings and clamps,
407 including cutting and making good the walls etc. 207 10 217.00 metre 394.15 85530.55 18.10.5
Providing and Fixing 50 mm dia G.I. pipe complete with G.I. Fittings and clamps,
408 including cutting and making good the walls etc. 196 10 206.00 metre 472.40 97314.40 18.10.6
Painting of 32 mm dia G.I. Pipes and fittings with two coats of anti-corrosive bitumastic
409 paint of approved quality. 594 25 619.00 metre 10.85 6716.15 18.40.4
Painting of 40 mm dia G.I. Pipes and fittings with two coats of anti-corrosive bitumastic
410 paint of approved quality. 207 10 217.00 metre 12.35 2679.95 18.40.5
Painting of 50 mm dia G.I. Pipes and fittings with two coats of anti-corrosive bitumastic
411 paint of approved quality. 196 10 206.00 metre 14.80 3048.80 18.40.6
Providing and fixing G.I. Inlet fittings with maximum 3 inlets 32,40 & 50 mm size
fabricated from 100 mm dia G.I. pipes and welded G.I. sockets, fixed to C.I. Trap with
412 lead caulked joints and set in cement concrete(1:2:4) complete as directed by Engineer- 483 20 503.00 Each 2393.66 1204009.10 MR
in-charge.
Providing and Fixing SS Grating with frame and SS Screws casted heavy 125 mm dia
413 complete as directed by Engineer-in-charge. 627 28 655.00 Each 1459.72 956115.77 MR
Providing and Fixing 250 mm dia Dome Grating for roof rain water pipe with all required
414 accessories complete as directed by Engineer-in-charge. 45 45.00 Each 20253.47 911406.37 MR
Providing and Fixing 300 mm dia Dome Grating for roof rain water pipe with all required
415 accessories complete as directed by Engineer-in-charge. 35 35.00 Each 25963.61 908726.42 MR
Providing and fixing 100 mm dia cast brass cleanout plug / floor cleanout with
suitable insert keys for opening, male threaded joint with G.I. socket caulked to
416 spun soil pipe including cost of joint etc.complete as directed by Engineer-in-charge.. 225 225.00 Each 1259.99 283498.04 MR
Providing and fixing 150 mm dia cast brass cleanout plug / floor cleanout with
suitable insert keys for opening, male threaded joint with G.I. socket caulked to
417 spun soil pipe including cost of joint etc.complete as directed by Engineer-in-charge.. 22 22.00 Each 2231.58 49094.76 MR
Providing and fixing 150 mm dia cast iron soil, waste and vent pipes as per IS:15905
(Hubless pipes) including all fittings with or without access of any degree i.e bends,
junctions, branches, end caps, reducers, cowls, offsets, access pieces, G.I. holder bats
and clamps, stays, etc and jointing with stainless steel 304 couplings with EPDM rubber
gasket, including cutting holes in walls and floors and making good the same wherever
418 required, all structural supports as per approved specifications, complete, as per 2260 2260.00 metre 1950.02 4407042.79 MR
instructions of the Engineer-in-charge.
Providing & laying cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 stone
aggregate 20mm and down gauge) 75mm in bed and pipe.
419 For 150, 100mm, 75mm and 50mm dia pipes under floor including centering & 1182 40 1222.00 metre 376.38 459933.31 MR
shuttering wherever required.
Excavating trenches of required width for pipes, cables, etc including excavation for
sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting
out the excavated soil, and then returning the soil as required, in layers not exceeding
20 cm in depth, including consolidating each deposited layer by ramming, watering, etc.
and disposing of surplus excavated soil as directed, within a lead of 50 m :
421 All Kinds of Soil 5170.00 5170.00 metre 225.45 1165576.50 2.10.1.2
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
Providing and fixing 25mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I.
Fittings and clamps, including cutting and making good the walls etc. (internal work)
422 Exposed on wall 110 25 135.00 metre 425.90 57497.00 MR
Providing and fixing 32 mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I.
Fittings and clamps, including cutting and making good the walls etc. (internal work)
423 Exposed on wall 50 30 80.00 metre 494.62 39569.38 MR
Providing and fixing 40 mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I.
Fittings and clamps, including cutting and making good the walls etc. (internal work)
424 Exposed on wall 260 50 310.00 metre 604.03 187249.98 MR
Providing and fixing 50 mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I.
Fittings and clamps, including cutting and making good the walls etc. (internal work)
425 Exposed on wall 450 40 490.00 metre 780.00 382200.00 MR
Providing and fixing 65 mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I.
Fittings and clamps, including cutting and making good the walls etc. (internal work)
426 Exposed on wall 500 50 550.00 metre 915.44 503492.33 MR
Providing and fixing 80 mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I.
Fittings and clamps, including cutting and making good the walls etc. (internal work)
427 Exposed on wall 190 190.00 metre 1056.34 200704.93 MR
Providing and fixing 100 mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I.
Fittings and clamps, including cutting and making good the walls etc. (internal work)
428 Exposed on wall 2885 2885.00 metre 1381.09 3984440.96 MR
Providing and fixing 150 mm dia. Nominal bore G.I. Class "C" Pipe complete with G.I.
Fittings and clamps, including cutting and making good the walls etc. (internal work)
429 Exposed on wall 1320 1320.00 metre 1907.37 2517731.84 MR
Providing and fixing 50 mm dia G.I pipes Class "C" complete with G.I fittings including
430 trenching and refilling etc. (External work) 315 315.00 metre 559.96 176387.93 MR
Providing and fixing 65 mm dia G.I pipes Class "C" complete with G.I fittings including
431 trenching and refilling etc. (External work) 260 260.00 metre 714.69 185819.14 MR
Providing and fixing 20 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain & brass threaded
fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes
& fittings with one step CPVC solvent cement and the cost of cutting chases and making
435 good the same including testing of joints complete as per direction of Engineer in 1845 25 1870.00 metre 284.85 532669.50 18.8.2
Charge.
Concealed work, including cutting chases and making good the walls etc.
Providing and fixing 25 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain & brass threaded
fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes
& fittings with one step CPVC solvent cement and the cost of cutting chases and making
436 good the same including testing of joints complete as per direction of Engineer in 777 13 790.00 metre 333.60 263544.00 18.8.3
Charge.
Concealed work, including cutting chases and making good the walls etc.
Providing and fixing 32 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain & brass threaded
fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes
& fittings with one step CPVC solvent cement and the cost of cutting chases and making
437 good the same including testing of joints complete as per direction of Engineer in 597 3 600.00 metre 412.90 247740.00 18.8.4
Charge.
Concealed work, including cutting chases and making good the walls etc.
Providing and fixing 40 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain & brass threaded
fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes
& fittings with one step CPVC solvent cement and the cost of cutting chases and making
438 good the same including testing of joints complete as per direction of Engineer in 1140 1140.00 metre 681.25 776622.28 MR
Charge.
Concealed work, including cutting chases and making good the walls etc.
Providing and fixing 50 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain & brass threaded
fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes
& fittings with one step CPVC solvent cement and the cost of cutting chases and making
439 good the same including testing of joints complete as per direction of Engineer in 410.00 410.00 metre 982.85 402967.14 MR
Charge.
Concealed work, including cutting chases and making good the walls etc.
Providing and fixing 65 mm dia Chlorinated Polyvinyl Chloride (CPVC Schedule 40) pipes,
having thermal stability for hot & cold water supply, including all CPVC plain & brass
threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing
of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases
440 and making good the same including testing of joints complete as per direction of 130 130.00 metre 1412.13 183577.52 MR
Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
Providing and fixing 35 mm od Stainless Steel pipes (Grade SS-316) confirming to JIS
3448 standard complete with Press Type fittings with SC-Contur in accordance with
DVGW regulation W534 such as sockets, bends, elbows, tees, reducers, unions,
Flanges, clamps/structural steel supports,hangers etc. necessary adapters for GI to SS /
442 other metals and for connections to CP fittings, jointing, sundries,cutting holes in 460 460.00 metre 1650.68 759312.60 MR
walls/floors/slabs & making good, complete in all respects.
Providing and fixing 42 mm od Stainless Steel pipes (Grade SS-316) confirming to JIS
3448 standard complete with Press Type fittings with SC-Contur in accordance with
DVGW regulation W534 such as sockets, bends, elbows, tees, reducers, unions,
Flanges, clamps/structural steel supports,hangers etc. necessary adapters for GI to SS /
443 other metals and for connections to CP fittings, jointing, sundries,cutting holes in 80 80.00 metre 1965.52 157241.45 MR
walls/floors/slabs & making good, complete in all respects.
Providing and fixing 54 mm od Stainless Steel pipes (Grade SS-316) confirming to JIS
3448 standard complete with Press Type fittings with SC-Contur in accordance with
DVGW regulation W534 such as sockets, bends, elbows, tees, reducers, unions,
Flanges, clamps/structural steel supports,hangers etc. necessary adapters for GI to SS /
444 other metals and for connections to CP fittings, jointing, sundries,cutting holes in 60 60.00 metre 2504.79 150287.16 MR
walls/floors/slabs & making good, complete in all respects.
Providing and fixing 75 mm od Stainless Steel pipes (Grade SS-316) confirming to JIS
3448 standard complete with Press Type fittings with SC-Contur in accordance with
DVGW regulation W534 such as sockets, bends, elbows, tees, reducers, unions,
Flanges, clamps/structural steel supports,hangers etc. necessary adapters for GI to SS /
445 other metals and for connections to CP fittings, jointing, sundries,cutting holes in 110 110.00 metre 4602.79 506307.41 MR
walls/floors/slabs & making good, complete in all respects.
Providing and fixing 90 mm od Stainless Steel pipes (Grade SS-316) confirming to JIS
3448 standard complete with Press Type fittings with SC-Contur in accordance with
DVGW regulation W534 such as sockets, bends, elbows, tees, reducers, unions,
Flanges, clamps/structural steel supports,hangers etc. necessary adapters for GI to SS /
446 other metals and for connections to CP fittings, jointing, sundries,cutting holes in 610 610.00 metre 5373.18 3277638.16 MR
walls/floors/slabs & making good, complete in all respects.
Providing and laying S & S Centrifugaly Cast (Spun) / Ductile Iron Pipes conforming to IS :
447 8329: 890 890.00 metre 958.95 853465.50 18.72.15
100 mm dia Ductile Iron Class K-9 pipes
Providing and laying S & S Centrifugaly Cast (Spun) / Ductile Iron Pipes conforming to IS :
448 8329: 350 350.00 metre 1438.35 503422.50 18.72.16
150 mm dia Ductile Iron Class K-9 pipes
Providing push-on-joints of 100 mm dia for Centrifugally (Spun) Cast Iron Pipes or
449 Ductile Iron Pipes including testing of joints and the cost of rubber gasket : 296.6666666667 296.67 Joint 65.10 19313.00 18.70.1
Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS :
451 9523 : 1 1.00 Quintal 16207.45 16207.45 18.69.1
Up to 600 mm dia
Providing and fixing 25 mm dia G.I. Union in G.I. Pipe including cutting and threading
452 the pipe and making long screws etc. complete (new work) 14 2 16.00 Each 205.80 3292.80 18.46.3
Providing and fixing 32 mm dia G.I. Union in G.I. Pipe including cutting and threading
453 the pipe and making long screws etc. complete (new work) 8 3 11.00 Each 240.65 2647.15 18.46.4
Providing and fixing 40 mm dia G.I. Union in G.I. Pipe including cutting and threading
454 the pipe and making long screws etc. complete (new work) 26 5 31.00 Each 298.75 9261.25 18.46.5
Providing and fixing 50 mm dia G.I. Union in G.I. Pipe including cutting and threading
455 the pipe and making long screws etc. complete (new work) 77 4 81.00 Each 384.90 31176.90 18.46.6
Providing and fixing 65 mm dia G.I. Union in G.I. Pipe including cutting and threading
456 the pipe and making long screws etc. complete (new work) 74 5 79.00 Each 617.20 48758.80 18.46.7
Providing and fixing 80 mm dia G.I. Union in G.I. Pipe including cutting and threading
457 the pipe and making long screws etc. complete (new work) 23 23.00 Each 698.50 16065.50 18.46.8
Providing and fixing 100 mm dia G.I. Union in G.I. Pipe including cutting and threading
458 the pipe and making long screws etc. complete (new work) 282 282.00 Each 3413.72 962668.60 MR
Providing and fixing 150 mm dia G.I. Union in G.I. Pipe including cutting and threading
459 the pipe and making long screws etc. complete (new work) 120 120.00 Each 8079.36 969523.72 MR
Painting of 50 mm dia G.I. pipes and fittings with two coats of anti-corrosive bitumastic
460 paint of approved quality 315 315.00 metre 14.80 4662.00 18.40.6
Painting of 65 mm dia G.I. pipes and fittings with two coats of anti-corrosive bitumastic
461 paint of approved quality 260 260.00 metre 18.25 4745.00 18.40.7
Painting of 80 mm dia G.I. pipes and fittings with two coats of anti-corrosive bitumastic
462 paint of approved quality 50 50.00 metre 21.20 1060.00 18.40.8
Painting of 100 mm dia G.I. pipes and fittings with two coats of anti-corrosive bitumastic
463 paint of approved quality 180 180.00 metre 24.15 4347.00 Derived
Painting 25 mm dia G.I. pipes and fittings with synthetic enamel white paint
464 with two coats over a ready mixed priming coat, both of approved quality for new work 85 25 110.00 metre 15.50 1705.00 18.38.3
Painting 32 mm dia G.I. pipes and fittings with synthetic enamel white paint
465 with two coats over a ready mixed priming coat, both of approved quality for new work 20 30 50.00 metre 18.40 920.00 18.38.4
Painting 40 mm dia G.I. pipes and fittings with synthetic enamel white paint
466 with two coats over a ready mixed priming coat, both of approved quality for new work 210 50 260.00 metre 21.75 5655.00 18.38.5
Painting 50 mm dia G.I. pipes and fittings with synthetic enamel white paint
467 with two coats over a ready mixed priming coat, both of approved quality for new work 410 40 450.00 metre 25.75 11587.50 18.38.6
Painting 65 mm dia G.I. pipes and fittings with synthetic enamel white paint
468 with two coats over a ready mixed priming coat, both of approved quality for new work 450 50 500.00 metre 30.00 15000.00 Derived
Painting 100 mm dia G.I. pipes and fittings with synthetic enamel white paint
470 with two coats over a ready mixed priming coat, both of approved quality for new work 2885 2885.00 metre 41.00 118285.00 Derived
Painting 150 mm dia G.I. pipes and fittings with synthetic enamel white paint
471 with two coats over a ready mixed priming coat, both of approved quality for new work 1320 1320.00 metre 43.00 56760.00 Derived
Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in
472 external work for 32 mm dia pipe 110 110.00 metre 71.30 7843.00 18.41.4
Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in
473 external work for 40 mm dia pipe 250 250.00 metre 72.25 18062.50 18.41.5
Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in
474 external work for 50 mm dia pipe 895 895.00 metre 74.95 67080.25 18.41.6
Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in
475 external work for 65 mm dia pipe 310 310.00 metre 118.30 36673.00 18.41.7
Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in
476 external work for 80 mm dia pipe 710 710.00 metre 121.90 86549.00 18.41.8
Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in
477 external work for 100 mm dia pipe 2360 2360.00 metre 129.10 304676.00 18.41.9
Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in
478 external work for 150 mm dia pipe 450 450.00 metre 192.30 86535.00 18.41.10
Providing and fixing 20 mm dia forged brass lever operated ball valve of full flow with
forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and
479 spindle with setting and gland of superior quality having minimum working pressure of 8 8.00 Each 796.67 6373.35 MR
10 kg/cm2 etc. complete in all respect.
Providing and fixing 25 mm dia forged brass lever operated ball valve of full flow with
forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and
480 spindle with setting and gland of superior quality having minimum working pressure of 93 3.00 96.00 Each 1252.80 120268.43 MR
10 kg/cm2 etc. complete in all respect.
Providing and fixing 32 mm dia forged brass lever operated ball valve of full flow with
forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and
481 spindle with setting and gland of superior quality having minimum working pressure of 51 2.00 53.00 Each 2114.09 112046.65 MR
10 kg/cm2 etc. complete in all respect.
Providing and fixing 40 mm dia forged brass lever operated ball valve of full flow with
forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and
482 spindle with setting and gland of superior quality having minimum working pressure of 41 1.00 42.00 Each 2975.12 124954.85 MR
10 kg/cm2 etc. complete in all respect.
Providing and fixing 50 mm dia forged brass lever operated ball valve of full flow with
forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and
483 spindle with setting and gland of superior quality having minimum working pressure of 26 1.00 27.00 Each 4403.00 118881.11 MR
10 kg/cm2 etc. complete in all respect.
Providing and fixing 65 mm dia C.I. butterfly valves of approved make , wafer end type
class PN 1.6 as per I.S:13095 or with integrally moulded linear of nitrile or EPDM, SS
484 Disc and steam lever operated including necessary nuts, bolts, gaskets, flanges etc., 41 41.00 Each 3756.51 154016.87 MR
complete as directed by Engineer-in-charge.
Providing and fixing 80 mm dia C.I. butterfly valves of approved make , wafer end type
class PN 1.6 as per I.S:13095 or with integrally moulded linear of nitrile or EPDM, SS
485 Disc and steam lever operated including necessary nuts, bolts, gaskets, flanges etc., 4 4.00 Each 4010.83 16043.33 MR
complete as directed by Engineer-in-charge.
Providing and fixing 150 mm dia C.I. butterfly valves of approved make , wafer end type
class PN 1.6 as per I.S:13095 or with integrally moulded linear of nitrile or EPDM, SS
487 Disc and steam lever operated including necessary nuts, bolts, gaskets, flanges etc., 1 1.00 Each 6928.00 6928.00 MR
complete as directed by Engineer-in-charge.
Providing & fixing 65 mm dia Non return valve of approved make CI body for PN 1.6
488 rating, conforming to IS:5312 complete in all respects. 8 8.00 Each 3166.17 25329.32 MR
Vertical
Providing & fixing 150 mm dia Non return valve of approved make CI body for PN 1.6
489 rating, conforming to IS:5312 complete in all respects. 2 2.00 Each 10932.64 21865.28 MR
Vertical
Providing and Fixing 20 mm dia Pressure Reducing station for cold water supply
comprising of 2 Nos. of brass ball valves on outlet and bye-pass and ball valve with
inbuilt strainers and a PRV (Diaphram type) unit with out going pressure gauge with
flanged or union connection including safety valve. The complete system is tested to a
pressure not less than 15 Kg/Cm2 and suitable to reduce the pressure as per
490 requirement including flanges/unions, nuts, bolts and washers complete as required for 9 9.00 Each 1391.18 12520.61 MR
applications. (Horizontal or vertical as applicable).
Providing and Fixing 25 mm dia Pressure Reducing station for cold water supply
comprising of 2 Nos. of brass ball valves on outlet and bye-pass and ball valve with
inbuilt strainers and a PRV (Diaphram type) unit with out going pressure gauge with
flanged or union connection including safety valve. The complete system is tested to a
pressure not less than 15 Kg/Cm2 and suitable to reduce the pressure as per
491 requirement including flanges/unions, nuts, bolts and washers complete as required for 9 9.00 Each 2485.64 22370.79 MR
applications. (Horizontal or vertical as applicable).
Providing and Fixing 32 mm dia Pressure Reducing station for cold water supply
comprising of 2 Nos. of brass ball valves on outlet and bye-pass and ball valve with
inbuilt strainers and a PRV (Diaphram type) unit with out going pressure gauge with
flanged or union connection including safety valve. The complete system is tested to a
pressure not less than 15 Kg/Cm2 and suitable to reduce the pressure as per
492 requirement including flanges/unions, nuts, bolts and washers complete as required for 9 1 10.00 Each 3116.38 31163.83 MR
applications. (Horizontal or vertical as applicable).
Providing and Fixing 40 mm dia Pressure Reducing station for cold water supply
comprising of 2 Nos. of brass ball valves on outlet and bye-pass and ball valve with
inbuilt strainers and a PRV (Diaphram type) unit with out going pressure gauge with
flanged or union connection including safety valve. The complete system is tested to a
pressure not less than 15 Kg/Cm2 and suitable to reduce the pressure as per
493 requirement including flanges/unions, nuts, bolts and washers complete as required for 23 1 24.00 Each 3773.77 90570.53 MR
applications. (Horizontal or vertical as applicable).
Providing and Fixing 65 mm dia Pressure Reducing station for cold water supply
comprising of 2 Nos. of brass ball valves on outlet and bye-pass and ball valve with
inbuilt strainers and a PRV (Diaphram type) unit with out going pressure gauge with
flanged or union connection including safety valve. The complete system is tested to a
pressure not less than 15 Kg/Cm2 and suitable to reduce the pressure as per
495 requirement including flanges/unions, nuts, bolts and washers complete as required for 2 2.00 Each 9336.71 18673.42 MR
applications. (Horizontal or vertical as applicable).
Providing and Laying 25 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all
fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access pieces etc. jointing
with solvent cement complete. Rates includes any type of fittings required for the
provision of Garden Hydrant point in main ring of the Hydrant pipe in different location
496 complete in with trenching, refilling and testing of joints complete as per direction of 100 100.00 metre 852.14 85214.18 MR
the engineer in charge
Providing and Laying 32 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all
fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access pieces etc. jointing
with solvent cement complete. Rates includes any type of fittings required for the
provision of Garden Hydrant point in main ring of the Hydrant pipe in different location
497 complete in with trenching, refilling and testing of joints complete as per direction of 790 790.00 metre 997.38 787932.36 MR
the engineer in charge
Providing and Laying 40 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all
fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access pieces etc. jointing
with solvent cement complete. Rates includes any type of fittings required for the
provision of Garden Hydrant point in main ring of the Hydrant pipe in different location
498 complete in with trenching, refilling and testing of joints complete as per direction of 110 110.00 metre 1182.73 130100.03 MR
the engineer in charge
Providing and Laying 50 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all
fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access pieces etc. jointing
with solvent cement complete. Rates includes any type of fittings required for the
provision of Garden Hydrant point in main ring of the Hydrant pipe in different location
499 complete in with trenching, refilling and testing of joints complete as per direction of 250 250.00 metre 1491.64 372908.90 MR
the engineer in charge
Providing and Laying 63 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all
fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access pieces etc. jointing
with solvent cement complete. Rates includes any type of fittings required for the
provision of Garden Hydrant point in main ring of the Hydrant pipe in different location
500 complete in with trenching, refilling and testing of joints complete as per direction of 580 580.00 metre 1945.06 1128135.98 MR
the engineer in charge
Providing and Laying 90 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all
fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access pieces etc. jointing
with solvent cement complete. Rates includes any type of fittings required for the
provision of Garden Hydrant point in main ring of the Hydrant pipe in different location
502 complete in with trenching, refilling and testing of joints complete as per direction of 660 660.00 metre 3321.60 2192255.75 MR
the engineer in charge
Providing and Laying 110 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all
fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access pieces etc. jointing
with solvent cement complete. Rates includes any type of fittings required for the
provision of Garden Hydrant point in main ring of the Hydrant pipe in different location
503 complete in with trenching, refilling and testing of joints complete as per direction of 1290 1290.00 metre 4784.37 6171841.87 MR
the engineer in charge
Providing and Laying 160 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all
fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets, access pieces etc. jointing
with solvent cement complete. Rates includes any type of fittings required for the
provision of Garden Hydrant point in main ring of the Hydrant pipe in different location
504 complete in with trenching, refilling and testing of joints complete as per direction of 100 100.00 metre 9224.89 922488.81 MR
the engineer in charge
Constructing masonry chamber 30x30x50 cm with FPS bricks, inside with brick work in
cement mortar 1:4 (1 cement : 4 Coarse sand) for stop cock, with C.I. surface box
100x100x75 mm (inside) with hinged cover fixed in cement concrete slab1:2:4 mix (1
cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary
excavation foundation concrete 1:5:10 mix (1 cement : 5 fine sand and 10 graded
stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3
505 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat 1 1.00 Each 1195.35 1195.35 18.32.1
cement complete as per standard design.
With common burnt clay FPS (non modular) bricks of class designation 7.5
Constructing masonry Chamber 30x30x60 cm inside, in brick work in cement mortar 1:4
(1 cement :4 coarse sand) for Garden hydrant, with DI manhole cover heavy duty size
300x300mm (inside) with hinged cover & lifting arrangement fixed in cement concrete
slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal
size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10
graded stone 150mm thick aggregate 40mm nominal size ) and inside plastering with
506 cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat 54 54.00 Each 1200.00 64800.00 Derived
of neat cement complete as per standard design :
Providing and fixing 15 mm dia thermal insulation over hot water pipes in chase having
Japanese Red Oxide Primer Coat with 6mm thick Kaiflex, nitrile or approved equivalent
thermal insulation tubing, a elastomeric flexible material having hermetic blister closed
cell structure of expanded synthetic rubber having density of 60-90 Kg/m3 over pipes
of following sizes including all required accessories complete as per Manufacture's
510 specifications and finishing complete in all respect as directed by Engineer-in-charge. 20 20.00 Metre 217.27 4345.36 MR
Providing and fixing 20 mm dia thermal insulation over hot water pipes in chase having
Japanese Red Oxide Primer Coat with 6mm thick Kaiflex, nitrile or approved equivalent
thermal insulation tubing, a elastomeric flexible material having hermetic blister closed
cell structure of expanded synthetic rubber having density of 60-90 Kg/m3 over pipes
of following sizes including all required accessories complete as per Manufacture's
511 specifications and finishing complete in all respect as directed by Engineer-in-charge. 30 30.00 Metre 223.67 6709.98 MR
Providing and fixing 32 mm dia 750 mm long hot dipped G.I. Puddle flanges for water
tanks as per I.S. 1239 (Class C) with 6mm thick M.S. Plate of suitable size and welded
513 alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all 2 2.00 Each 1221.07 2442.14 MR
details in all respects and as per drawing.
Providing and fixing 40 mm dia 750 mm long hot dipped G.I. Puddle flanges for water
tanks as per I.S. 1239 (Class C) with 6mm thick M.S. Plate of suitable size and welded
514 alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all 2 2.00 Each 1290.98 2581.95 MR
details in all respects and as per drawing.
Providing and fixing 50 mm dia 750 mm long hot dipped G.I. Puddle flanges for water
tanks as per I.S. 1239 (Class C) with 6mm thick M.S. Plate of suitable size and welded
515 alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all 3 3.00 Each 1500.69 4502.08 MR
details in all respects and as per drawing.
Providing and fixing 65 mm dia 750 mm long hot dipped G.I. Puddle flanges for water
tanks as per I.S. 1239 (Class C) with 6mm thick M.S. Plate of suitable size and welded
516 alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all 5 5.00 Each 1920.13 9600.64 MR
details in all respects and as per drawing.
Providing and fixing 80 mm dia 750 mm long hot dipped G.I. Puddle flanges for water
tanks as per I.S. 1239 (Class C) with 6mm thick M.S. Plate of suitable size and welded
517 alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all 10 10.00 Each 2409.47 24094.70 MR
details in all respects and as per drawing.
Providing and fixing 100 mm dia 750 mm long hot dipped G.I. Puddle flanges for water
tanks as per I.S. 1239 (Class C) with 6mm thick M.S. Plate of suitable size and welded
518 alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all 2 2.00 Each 2968.72 5937.44 MR
details in all respects and as per drawing.
Providing and fixing 150 mm dia 750 mm long hot dipped G.I. Puddle flanges for water
tanks as per I.S. 1239 (Class C) with 6mm thick M.S. Plate of suitable size and welded
519 alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all 2 2.00 Each 3947.40 7894.80 MR
details in all respects and as per drawing.
Providing and fixing 50 mm dia C.I. double acting air valve of approved quality with
520 bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be 5 5.00 Each 4662.45 23312.25 18.59.1
paid separately) :
Providing & fixing 80 mm dia butterfly valve (with motorized actuator) of rating PN 1.6,
wafer type, in cast iron body with Ductile Iron disc, EPDM seal, SS single piece shaft,
conforming to IS-13095 of the following sizes complete with cast iron hand level
companion flanges, bolts, nuts, washers & inserted rubber gaskets, as required and as
per enclosed specification, with single phase Electrical Actuator, of 15Nm- 400Nm
Torque, made of aluminium alloy (resistant to heat, acid , alkali, corrosion), and weather
proof heavy duty motor, with stabilized start speed to effectively avoid water
521 hammering, with waterproofing seal (IP 67) for all housing seals, low noise level, built – 5 5.00 Each 18521.27 92606.37
in thermal protection complete as per approved type and specifications as per
instructions of the engineer - in - charge.
Providing, fixing and testing, double flanged 50 mm dia Water Flow Meter complete
with digital display provision & including Pulse generator and Remote Totalizer complete
524 in all respect as per manufacturers specification, instructions and approval as per 1 1.00 Each 21645.82 21645.82
engineer incharge.
Providing, fixing and testing, double flanged 65 mm dia Water Flow Meter complete
with digital display provision & including Pulse generator and Remote Totalizer complete
525 in all respect as per manufacturers specification, instructions and approval as per 8 8.00 Each 24137.52 193100.12
engineer incharge.
Extra for excavating trenches for pipes, cables, etc. in All Kinds soil exceeding 1.5 m in
depth but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5
metre).
527 All Kinds of Soil 1320.00 1320.00 Metre 286.32 377942.40 2.11
Pipes, cables etc., exceeding 80mm dia but not exceeding 300mm dia
Extra for excavating trenches for pipes, cables, etc. in All Kinds soil exceeding 1.5 m in
depth but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5
metre).
528 All Kinds of Soil 575.00 575.00 Metre 447.04 257048.00 2.11
Pipes, cables etc., exceeding 300mm dia but not exceeding 600mm dia
Extra for excavating trenches for pipes, cables, etc. in All Kinds soils exceeding 3 m in
depth but not exceeding 4.5 m. (Rate is over corresponding basic item for depth upto
1.5 metre).
529 All Kinds of Soil 525.00 525.00 Metre 1108.80 582120.00 2.12
Pipes, cables etc., exceeding 300mm dia but not exceeding 600mm dia
Providing and laying 200 mm dia non-pressure NP3 class R.C.C. pipes with collars jointed
530 with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) 600.00 600.00 metre 700.97 420580.96 MR
including testing of joints etc. complete.
Providing and laying 250 mm dia non-pressure NP3 class R.C.C. pipes with collars jointed
531 with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) 200.00 200.00 metre 845.83 169166.54 MR
including testing of joints etc. complete.
Providing and laying 400 mm dia non-pressure NP3 class R.C.C. pipes with collars jointed
533 with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) 280.00 280.00 metre 1944.46 544449.75 MR
including testing of joints etc. complete.
Providing and laying 500 mm dia non-pressure NP3 class R.C.C. pipes with collars jointed
534 with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) 270.00 270.00 metre 2429.44 655949.98 MR
including testing of joints etc. complete.
Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone
aggregate 40 mm nominal size) all-round RCC/HDPE. pipes including bed concrete as
535 per standard design for 150 mm dia pipe 120.00 120.00 metre 1041.57 124988.46 MR
Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone
aggregate 40 mm nominal size) all-round RCC/HDPE. pipes including bed concrete as
536 per standard design for 200 mm dia pipe 1180.00 1180.00 metre 1206.03 1423114.22 MR
Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone
aggregate 40 mm nominal size) all-round RCC/HDPE. pipes including bed concrete as
537 per standard design for 250 mm dia pipe 400.00 400.00 metre 1370.49 548195.00 MR
Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone
aggregate 40 mm nominal size) all-round RCC/HDPE. pipes including bed concrete as
538 per standard design for 300 mm dia pipe 280.00 280.00 metre 1644.59 460483.80 MR
Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone
aggregate 40 mm nominal size) all-round RCC/HDPE. pipes including bed concrete as
539 per standard design for 400 mm dia pipe 400.00 400.00 metre 1918.68 767473.00 MR
Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone
aggregate 40 mm nominal size) all-round RCC/HDPE. pipes including bed concrete as
540 per standard design for 450 mm dia pipe 90.00 90.00 metre 2137.96 192416.45 MR
Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone
aggregate 40 mm nominal size) all-round RCC/HDPE. pipes including bed concrete as
541 per standard design for 500 mm dia pipe 405.00 405.00 metre 2357.24 954681.59 MR
Providing and laying 160 mm ODHigh density Polythene (HDPE Pipes) material grade PE
- 80, working pressure rating PN 4 (0.4 maximum permissible working pressure)
confirming IS - 14333 jointed by Butt welding method including testing of joints etc.
542 complete 120.00 120.00 metre 1310.99 157318.97 MR
Providing and laying 225 mm ODHigh density Polythene (HDPE Pipes) material grade PE
- 80, working pressure rating PN 4 (0.4 maximum permissible working pressure)
confirming IS - 14333 jointed by Butt welding method including testing of joints etc.
543 complete 1000.00 1000.00 metre 2944.15 2944152.35 MR
Providing and laying 250 mm ODHigh density Polythene (HDPE Pipes) material grade PE
- 80, working pressure rating PN 4 (0.4 maximum permissible working pressure)
confirming IS - 14333 jointed by Butt welding method including testing of joints etc.
544 complete 200.00 200.00 metre 2583.67 516734.00 MR
Providing and laying 400 mm ODHigh density Polythene (HDPE Pipes) material grade PE
- 80, working pressure rating PN 4 (0.4 maximum permissible working pressure)
confirming IS - 14333 jointed by Butt welding method including testing of joints etc.
546 complete 120.00 120.00 metre 6856.17 822740.58 MR
Providing and laying 450 mm ODHigh density Polythene (HDPE Pipes) material grade PE
- 80, working pressure rating PN 4 (0.4 maximum permissible working pressure)
confirming IS - 14333 jointed by Butt welding method including testing of joints etc.
547 complete 90.00 90.00 metre 8573.76 771638.40 MR
Providing and laying 500 mm ODHigh density Polythene (HDPE Pipes) material grade PE
- 80, working pressure rating PN 4 (0.4 maximum permissible working pressure)
confirming IS - 14333 jointed by Butt welding method including testing of joints etc.
548 complete 135.00 135.00 metre 10474.56 1414065.32 MR
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating
brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size
(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than
549 2.70 kg as per standard design :: 40.00 40.00 Each 1623.25 64930.00 19.4.2.1
150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating
brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size
(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than
550 2.70 kg as per standard design :: 5.00 5.00 Each 1706.55 8532.75 19.4.3.1
180 x 150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand)
with RCC Top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate
20mm nominal size) foundation concrete 1:4:8 mix ( 1 cement :4 coarse sand: 8 graded
stone aggregate 40 nominal size), inside plastering 12mm thick with cement mortar 1:3
( 1 cement : 3 coarse sand), finished with a floating coat of neat cement and making
channels in cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size) finished with a floating coat of neat cement complete as
per standard design .
551 'Inside size 90x80 cms and 45cms deep including Ductile Iron cover( D.I.) and 47.00 47.00 Each 8634.10 405802.70 19.7.1.1
frame(Heavy duty) 610x455mm internal dimensions total weight of cover and frame to
be not less then 38 kg (wt. of cover 23 kg and weight of frame 15 kg)
With common burnt clay FPS(non modular) bricks of class designation 7.5
Extra depth of manholes Size 90x80cms With FPS Bricks with class designation75
553 9.00 9.00 metre 5718.60 51467.40 19.8.1.1
Extra depth of manholes Size 120x90cms With FPS Bricks with class designation75
554 9.00 9.00 metre 6850.70 61656.30 19.8.2.1
Constructing Brick Masonry circular type manhole 0.91 m internal dia at bottom and
0.56m dia at top in cement mortar 1:4 (1 cement : 4 Coarse sand), inside cement plaster
12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating
coat of neat cement, foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand : 6
graded stone aggregate 40mm nominal size) and making necessary channel in Cement
Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone aggregate 20mm nominal
size) finished with a floating coat of neat cement all complete as per standard design.
External surface shall be finished with 15mm thick cement plaster 1:6 ( 1 cement : 6
Coarse sand) as per side conditions.
0.91m deep with Ductile Iron cover( D.I.) and frame(Heavy duty) and frame (heavy duty
555 HD-20 grade designation) 560mm internal diameter conforming to I.S:12592, total 40.00 40.00 Each 8683.75 347350.00 19.9.1.1
weight of cover and frame to be not less than 182Kg. fixed in cement concrete 1:2:4 mix
(1 Cement: 2 Coarse sand: 4 Graded stone aggregate 20mm nominal size) including
centering, shuttering all complete.
With common burnt clay FPS(non modular) bricks of class designation 7.5
Extra depth for circular type Manhole 0.91 internal dia with F.P.S. Bricks class
556 designation 75, depth beyond 0.91 m to 1.67 m 20.00 20.00 metre 4911.80 98236.00 19.10.1
Constructing Brick Masonry circular manhole 1.22 m internal dia at bottom and 0.56m
dia at top in cement mortar 1:4 (1 cement : 4 Coarse sand), cement plaster 12mm thick
with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat
cement, foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone
aggregate 40 mm nominal size) and making necessary channel in Cement Concrete
1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20mm nominal size)
finished with a floating coat of neat cement all complete as per standard design.
External surface shall be finished with 15mm thick cement plaster 1:6 ( 1 cement : 6
Coarse sand) as per side conditions.
1.68m deep with Ductile Iron cover( D.I.) and frame (heavy duty HD-20 grade
557 designation) 560mm internal diameter conforming to I.S:12592, total weight of cover 15.00 15.00 Each 16560.80 248412.00 19.11.1.1
and frame to be not less than 182Kg. fixed in cement concrete 1:2:4 mix (1cement: 2
coarse sand: 4 graded stone aggregate 20mm nominal size) including centering,
shuttering all complete.
Extra depth for Circular type Manhole 1.22 m internal dia (at Bottom) With F.P.S bricks
558 class designation 75, Depth beyond 1.68 to 2.29 m. 8.00 8.00 metre 6362.65 50901.20 19.12.1
Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m :
560 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 22.00 22.00 metre 15028.55 330628.10 19.14.1
Providing & fixing orange colour safety foot rest of minimum 6mm thick plastic
encapsulated as per I.S:10910 on 12 mm dia steel bar conforming to I.S:1786 having
minimum cross section as 23mm x 25mm and over all minimum length 263mm and
width as 165mm with minimum 165 mm space between protruded legs having 2mm
tread on top surface by ribbing or chequering besides necessary and adequate
anchoring projections on tail length on 138mm as per standard drawing and suitable to
with stand the bend test and chemical resistance test as per specifications and having
561 manufacturer's permanent identification mark to be visible even after fixing, including 1050.00 1050.00 Each 327.90 344295.00 19.16
fixing in manholes with 30x20x15cm cement concrete block 1:3:6 (1 cement: 3 coarse
sand: 6 graded stone aggregate 20mm nominal size) complete as per design.
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement
mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal
563 grating with frame complete as per standard design : 140.00 140.00 Each 4043.10 566034.00 19.27.1
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Providing and fixing M.S. grating and preferably in 600mm long pieces, fabricated with
16x16mm square bars, @ 20mm clear spacing and welded to angle iron 25x25x5mm
and placed firmly on angle iron frame of 30x30x5mm with 25x3mm hold fasts
approximately 75mm long welded at intervals of 500mm including two or more coats
568 of synthetic enamel paint of approved quality and shade over one coats of primer and 5000.00 5000.00 Kg 290.42 1452105.21 MR
set in cement mortar 1:3 (1 cement : 3 coarse sand) complete as per attached details
for drain.
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized
PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including
required hire and labour charges, fittings & accessories etc. all complete, for all depths,
570 as per direction of Engineer -in-charge For 200 mm nominal size dia 720.00 720.00 Metre 610.65 439668.00 23.3.3
Gravel packing in tube well construction in accordance with IS: 4097, including
572 providing gravel fine/ medium/ coarse, in required grading & sizes as per actual 120.00 120.00 Cum 1175.60 141072.00 23.8
requirement, all complete as per direction of Engineerin- charge.
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top
574 of bore well housing/ casing pipe, removable as per requirement, all complete for 8.00 8.00 Each 231.75 1854.00 23.13.3
borewell of 200 mm dia
Providing and fixing 200 mm dia M.S. clamp of required dia to the top of casing/housing
575 pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required 8 8.00 Each 1154.45 9235.60 23.14.3
size complete.
0.00
TOTAL SUB HEAD -18 0.00 1571593.20
0.00
19: RAINY WELL (32 NOS) 0.00
0.00
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method
prescribed in IS: 2800 (part I), including collecting samples from different strata,
preparing and submitting strata chart/ bore log, including hire & running charges of all
equipments, tools, plants & machineries required for the job, all complete as per
direction of Engineer -in-charge, beyond 90 m & upto 150 metre depth below ground
577 level. 3840.00 3840.00 Metre 632.45 2428608.00 Derived from DSR
All types of soil
500 mm dia
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized
PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including
required hire and labour charges, fittings & accessories etc. all complete, for all depths,
578 as per direction of Engineer -in-charge For 200 mm nominal size dia 2880.00 2880.00 Metre 610.65 1758672.00 23.3.3
Supplying, assembling, lowering and fixing in vertical position in borewell 200 mm dia
unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818,
579 including hire &labour charges, ittings & accessories etc. all complete, for all depths, as 960.00 960.00 Metre 821.15 788304.00 23.4.3
per direction of Engineer-in charge.
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in
580 recharge pit, in the required thickness, for all leads & lifts, all complete as per direction 256.00 256.00 Cum 921.90 236006.40 23.5
of Engineer-in-charge.
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the
581 recharge pit, over the existing layer of boulders, in required thickness, for all leads & 256.00 256.00 Cum 1038.05 265740.80 23.6
lifts, all complete as per direction of Engineer-incharge.
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in
582 recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as 256.00 256.00 Cum 1038.05 265740.80 23.7
per direction of Engineer -in-charge.
Gravel packing in tube well construction in accordance with IS: 4097, including
583 providing gravel fine/ medium/ coarse, in required grading & sizes as per actual 320.00 320.00 Cum 1175.60 376192.00 23.8
requirement, all complete as per direction of Engineerin- charge.
Providing and fixing factory made precast RCC perforated drain covers,having concrete
of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia
four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50
mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S.
584 64.00 64.00 Each 959.35 61398.40 23.9
flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge.
Development of Rainy well in accordance with IS : 2800 (part I) and IS: 11189, to
establish maximum rate of usable water yield without sand content (beyond permissible
limit), with required capacity air compressor, running the compressor for required time
till well is fully developed, measuring yield of well by “V” notch method or any other
approved method, measuring static level & draw down etc. by step draw down method,
collecting water samples & getting tested in approved laboratory, i/c disinfection of
585 tubewell, all complete, including hire & labour charges of air compressor, tools & 1280.00 1280.00 Hour 542.20 694016.00 23.12
accessories etc., all as per requirement and direction of Engineer-in-charge.
Providing and fixing 200 mm dia M.S. clamp of required dia to the top of
587 casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts 32.00 32.00 Each 1154.45 36942.40 23.14.3
of required size complete.
Providing and fixing 200 mm dia Bail plug/ Bottom plug of required dia to the bottom
588 of pipe assembly of tubewell as per IS:2800 (part I). 32.00 32.00 Each 253.95 8126.40 23.15.3
Providing and laying in position cement concrete of specified grade excluding the cost of
centering and shuttering - All work up to plinth level :
589 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal 68.80 68.80 Cum 4814.55 331241.04 4.1.6
size).
Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in
small lintels not exceeding 1.5m clear span up to floor five level, including the cost of
required centering, shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1
590 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). 150.40 150.40 Cum 9330.20 1403262.08 5.13
12 mm cement plaster finished with a floating coat of neat cement : 1:3 (1 cement : 3
591 fine sand) 4160.00 4160.00 Sqm 9.54 39686.40 13.7.1
Construction of brick masonry desilting chamber of size 200x100x60cm (effective
depth) before rainy well with 75 class designation bricks in cement mortar 1:4 (1
cement : 4 coarse sand) , foundation concrete 1:4:8 mix (1 cement : 4 coarse sand; 8
graded stone aggregate 40mm nominal size), inside and outside plastering 12mm thick
with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of
neat cement inside and rough plaster on outside, including fixing of grating , neatly
592 finished complete in all respects including neccessary excavation, refilling and disposal 32.00 32.00 Each 48610.00 1555520.00 MR
of surplus earth, complete as per attached Sketch.
594 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. 820.00 820.00 metre 84.85 69577.00 11.31
Extra for Kota stone/ sand stone in treads of steps and risers using single length up to
595 1.05 metre. 874.00 874.00 sqm 18.95 16562.00 11.32
Extra for providing and mixing water proofing material in cement concrete work in per 50 kg
596 doses by weight of cement as per manufacturer's specification. 2500.00 2500.00 47.95 119875.00 4.12
cement
Demolishing R.C.C. work manually/ by mechanical means including cutting &
597 stacking of steel bars and disposal of unserviceable material within AAI site 350.00 350.00 cum 454.55 159093.00 15.3
premises as per direction of Engineer - in- charge.
Providing and fixing 6mm thick bevelled edge mirror of superior glass of approved
quality and approved make with VHP tap (3M) & 25mm dia stainless steel stud and
10mm brush finish stainless steel trims machine cut in required size and shape as
599 approved shade colour etc complete at all levels as per detailed drawings and direction 505.00 505.00 sqm 1165.00 588325.00 MR
of Engineer in Charge.
Providing and fixing counters (Reception ,Wash basin or other similar location) with 12
mm thick antibacterial anti fungal, boiling water resistant heat resistant, impact
resistant, insulative non conductive, stain resistant, scratch resistant, Green Guard
certified Acrylic solid surface of approved make (LG Himac, Dupoint, Neonnex or
equivalent as approved) in approved colour and design, confirming to relevant
standards, and having minimum Specific Gravity 1.65 g/cm3, fixed over MS supporting
structure with all mechanical fixtures as per manufacturer's specification and guideline,
including fascia and back splash area as per approved drawings and design, including
fixing of solid acrylic surface over 12 mm thick (BWP) with suitable Low VOC adhesive,
601 moulding of edges, buffing of surface, making of holes for plumbing fixtures, flushing of 306.00 306.00 Sqm 13975.00 4276350.00 MR
joints, necessary hardware, silicon sealants, etc. all complete as per direction of
Engineer In charge. The plan and elevation area (horizontal and vertical) excluding wash
basin area will be measured for payment.
Extra over above item , for providing oval shaped wash basin of size 550 x 430 x200 mm
in vanity counter, made of moulded surface of 12 mm thick Acrylic solid of same
602 specification as above, and in approved colour and design, all complete as per drawings, 293.00 293.00 Each 7949.00 2329057.00 MR
specification and direction of Engineer in charge
Providing and fixing Urinal Partition of 12mm thick board both side decorative compact
laminate of required colour ,shade and sizes as manufactured by Merino or Greenlam
or T Line or approved equivalent including all stainless steel accessories/ fittings ( SS-
603 304 grade) like L clamp with ss screws etc as desired. all complete as per drawing and 125.00 125.00 Each 5044.00 630500.00 MR
direction of Engineer in charge. (size =(450x900)mm
Providing and fixing wall cladding with 12 mm thick antibacterial anti fungal, boiling
water resistant heat resistant, impact resistant, insulative non conductive, stain
resistant, scratch resistant, Green Guard certified Acrylic solid surface of approved make
(LG Himac, Dupoint, Neonnex or equivalent as approved) in approved colour and
design, confirming to relevant standards, and having minimum Specific Gravity 1.65
g/cm3, fixed with aluminum frame over wall in true line and level, as per
manufacturer's specification , drawings and design, including suitable Low VOC
adhesive, buffing of surface, making of holes for plumbing fixtures, flushing of joints,
604 necessary hardware, silicon sealants, etc. all complete as desired and direction of 1198.00 1198.00 Sqm 12883.00 15433834.00 MR
Engineer In charge. Note :-Only surface area of acrylic solid surface panel alongwith its
groove shall be measured for payment.
Extra over and above C & C router design pattern for Acrylic solid surface wall cladding
refer drawing with all respect as desired as per manufacturer specifications and
605 direction of Engineer in charge.( payment shall be paid of actual area of C & C router 1198.00 1198.00 sqm 5140.00 6157720.00 MR
design pattern.)
Fabrication, Supply & Installation of SS Bollard as Approved make of Stainless Steel 304
grade Bollard , Height-900mm, Diameter – 114mm,thickness of bollard -2mm , Base
plate dia –210mm, Fixed to floor with Chemical fasteners as per refer drawing LKO-INT-
606 36/37 and manufacturer specifications complete with all respect as desired and 147.00 147.00 each 12289.00 1806483.00 MR
direction of Engineer in charge.
Providing, making and placing in position Ticket Counter made up from 19mm thick
block board covered with 1.00mm thick laminate of approved make/ shade having hard
wood base of specified section including fixing of 12mm thick acrylic polymer solid
surface of corian (LG Himac, Dupoint, Neonnex or equivalent as approved) at the
608 designated location with necessary fixtures ,fittings etc. complete as shown in the 16.00 16.00 each 93648.00 1498368.00 MR
drawing and as per the direction of the Engineer-In-Charge .Refer Drg. No
LKO_TD_B_DEC_0100_DW_0005_01/11/12
Providing, making and placing in position Immigration counters made up from 19mm
thick block board covered with 1.00mm thick laminate of approved make/ shade having
hard wood base of specified section including fixing of 12mm thick acrylic polymer solid
surface of corian (LG Himac, Dupoint, Neonnex or equivalent as approved) at the
designated location with necessary fixtures ,fittings etc. complete as shown in the
609 drawing and as per the direction of the Engineer-In-Charge .Refer Drg. No 36.00 36.00 each 128093.00 4611348.00 MR
LKO_TD_B_DEC_0100_DW_0005_09
Providing, making and placing in position Custom Counter made up from 19mm thick
block board covered with 1.00mm thick laminate of approved make/ shade having hard
wood base of specified section including fixing of 12mm thick acrylic polymer solid
surface of corian (LG Himac, Dupoint, Neonnex or equivalent as approved) at the
designated location with necessary fixtures ,fittings etc. complete as shown in the
610 drawing and as per the direction of the Engineer-In-Charge .Refer Drg. No 6.00 6.00 each 128093.00 768558.00 MR
LKO_TD_B_DEC_0100_DW_0005_14
Providing, making and placing in position Information Desk made up from 19mm thick
block board covered with 1.00mm thick laminate of approved make/ shade having hard
wood base of specified section including fixing of 12mm thick acrylic polymer solid
surface of corian (LG Himac, Dupoint, Neonnex or equivalent as approved) at the
designated location with necessary fixtures ,fittings etc. complete as shown in the
611 drawing and as per the direction of the Engineer-In-Charge.Refer Drg. No 4.00 4.00 each 271664.00 1086656.00 MR
LKO_TD_B_DEC_0100_DW_0005_13
Providing, making and placing in position Inspection Desk made up from 19mm thick
block board covered with 1.00mm thick laminate of approved make/ shade having hard
wood base of specified section including fixing of 12mm thick acrylic polymer solid
surface of corian (LG Himac, Dupoint, Neonnex or equivalent as approved) at the
designated location with necessary fixtures ,fittings etc. complete as shown in the
612 drawing and as per the direction of the Engineer-In-Charge.Refer Drg. No 20.00 20.00 each 271664.00 5433280.00 MR
LKO_TD_B_DEC_0100_DW_0005_04
Providing and fixing in position security check inspection & X-ray Monitoring table of
following sizes consisting of 19mm thick Commercial board of BWR grade covered with
12mm thick corian of approved shade pasted over the CBB with adhesive and all
necessary screws etc. complete as shown drawing No. MT/ID-32 and as per direction of
614 30.00 30.00 each 78483.00 2354490.00 MR
the Engoneer-in-Charge.Drg. No LKO_TD_B_DEC_0100_DW_0005_05
Providing, making and placing in position security check & stamping table Pedestal
( gents) made up from 19mm thick block board including fixing of 12mm thick acrylic
polymer solid surface of approved shade(LG Himac, Dupoint, Neonnex or equivalent as
approved) and 1.0mm thick white Laminate on the under faces of the Desk at the
designated location with rounded edges with necessary fixtures ,fittings etc.complete as
615 shown in the drawing and as per the direction of the Engineer-In-Charge.Refer Drg. No 23.00 23.00 each 52835.00 1215205.00 MR
LKO_TD_B_DEC_0100_DW_0005_07
Providing, Fabricating and installation in position of Security check for ladies (Frisking
Booth ) comprising frame work of SS Section 50 x 50x 3mm over the 12mm thick M.S
base Plate fixed to the floor with the help of the fasteners.The frame work is covered
with 12mm thick Toughened Glass screwed to the SS frame work with the help of 25 dia
SS studs,the toughened glass shall have 3 mm thick fasara film Matte crystal ( SH2
MACRX ) patsed internally, the frisking booth shall be a complete unit in itself with all
616 necessary fittings, fixtures etc.complete as shown in the Drg. MT/ID-30 and as per the 13.00 13.00 each 187738.00 2440594.00 MR
direction of the Engineer-In-Charge.Refer Drg. No LKO_TD_B_DEC_0100_DW_0005_06
Providing and erecting 2.0 metre high temporary barricading at site as per drawing/
direction of Engineer-in-Charge which includes writing and painting, arrangement for
traffic diversion such as traffic signals during construction at site for day and night, glow
lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-
Charge. The barricading provided shall be retained in position at site continuously i/c
shifting of barricading from one location to another location as many times as required
during the execution of the entire work till its completion. Rate include its maintenance
for damages, painting, all incidentals, labour materials, equipments and works required
to execute the job. The barricading shall not be removed without prior approval of
619 Engineer-in-Charge. 2800.00 2800.00 metre 1577.05 4415740.00 16.81
(Note :- One time payment shall be made for providing barricading from start of work
till completion of work i/c shifting. The barricading provided shall remain to be the
property of the contractor on completion of the work).
Providing and fixing Vitreous China waterless unrinals of size 336.5mm x 495.3mm x
3302mm. Make Zeroflush (Model No 2F 501) or approved equivalent make . The
quoted rate shall include thecost of wall hung fixture i.e. waterless urinal pot, one unit
integrated wall hanger, fastning hardware , built in centre draining receptacle to accept
the vertical draft , drain insert , mounting template, drain tube , rubber flange gasket
621 and elastomer trap complete as per manufacturers specification and directions of 24.00 0.00 24.00 each 39685.60 952454.00 MR
Engineers-in-charge.
20.2A.3
Boring, providing & installation bored cast in situ reinforced concrete piles of grade M-
25 of specified diameter and length below pile cap to carry a safe working load not less
than specified, excluding the cost of steel reinforcement but including the cost of boring
with bentonite solution and temporary casing of appropriate length for setting out and
removal of same and the length of pile to be embedded in the pile cap etc by crawler
mounted telescopic boom hydraulic piling Rig all complete, including removal of
excavated earth with all it's lifts & leads. ( length of pile for payment shall be measured
upto bottom of pile cap)
623 Note : Truck mounted rotary/TMR/Tube well boring machine shall not be used. 9856.00 9856.00 metre 11597.55 114305452.80
1200 mm dia piles
20.2A.4
Vertical load testing of Piles in accordance with IS 2911 (Part IV) including installation of
loading platform by Kentledge/Anchor piles method & preparation of pile head or
construction of test cap and dismantling of test cap after test etc. complete as per
specification & the direction of Engineer in-charge.
624 Group of two or more piles up to 50 ton safe capacity 9.00 9.00 each 56332.75 506994.75
Initial Test(Test load 2.5 times the safe capacity)
20.6.3.1
Vertical load testing of Piles in accordance with IS 2911 (Part IV) including installation of
loading platform by Kentledge/Anchor piles method & preparation of pile head or
construction of test cap and dismantling of test cap after test etc. complete as per
specification & the direction of Engineer in-charge.
625 Group of two or more piles up to 50 ton safe capacity 9.00 9.00 each 34264.25 308378.25
Routine Test (Test load 1.5 times the Safe capacity)
20.6.3.2
Lateral load testing of Single Pile in accordance with IS Code of Practice IS:2911 (Part IV)
626 for determining safe allowable lateral load on pile: 9.00 9.00 each 17422.5 156802.50
Upto 50 tonne capacity pile
20.8.1
Lateral load testing of Single Pile in accordance with IS Code of Practice IS:2911 (Part IV)
627 for determining safe allowable lateral load on pile: 9.00 9.00 each 27411.4 246702.60
Above 50 tonne and upto 100 tonne capacity pile
20.8.2
Integrity testing of Pile using low strain/Sonic Integrity test/Sonic Echo Test Method in
accordance with IS-14893 including surface preparation of pile top by removing soil,
mud, dust & chipping lean concrete lumps etc and use of Computerised equipment &
high skill trained personnel for conducting the test and submission of results, all
628 complete as per direction of Engineer-in-charge. 1.00 1.00 each 750.95 750.95
20.9
TOTAL SUB HEAD -21 115533954.25 0.00
377940.47
Add for misc 2.5% 9448.51
Total 387388.98
take 388000
ITEM-1
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in
width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5, including getting out the excavated soil and disposal of
2
surplus excavated soil as directed , with in AAI premises.
All kinds of soil
Trench works
UNITS NOS L B H TOTAL
Cu.m 10 400 1.5 1.48 8900
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each
3 deposited layer by ramming and watering, lead with in AAI permise sand lift upto 1.5 m.
Terminal building
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
4 All kinds of soil
5 Supplying and filling in plinth with fine sand in pile foundations and under floors, including watering, ramming, consolidating and dressing complete.
Qty
Extra sand thickness (mm) area (sqm) UNITS
(cum)
extra sand filling 300 46700 14010 Cu.m
Add for misc 2.5% 350.25 Cu.m
total 14360.25 Cu.m
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and
7 disposal of excavated earth with in AAI permises and lift upto 1.5 m, as directed by Engineer-in-Charge.
All kinds of soil.
Top soil as per griha norms ( area of
basement ) 1 21100.00 1.00 21100.00
area of fourcourt 1 8900.00 1 8900.00
30000.00 sqm
Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
Along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300
8 mm including excavation channel along the wall & rodding etc. complete:
With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
Treatment of soil under floors using chemical emulsion @ one liter per hole, 300 mm apart including drilling 12 mm diameter holes :
9 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level
13 1:5:10 (1 Cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size)
Set L B H Total
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level
14 1:4:8 (1 Cement : 4 coarse sand (zone-III): 8 graded stone aggregate 40 mm nominal size)
Foundation 1778.33
Basement level 2245.00
apron level 1358.66
Tunnel 638.00
Total 6019.99
Add for misc 5% 301.00
Total 6320.99
Or Say 6500.00
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level
15 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
M-10
PCC work in Raft slab ( Tower)( 9999-
2378) 1 area 21100.00 0.000 0.00 cum
L/Area B Qty
Service Tunnel Nos. Depth (m)
(m/m2) (m) (CUM)
Tunnel base Grid 1-14* 1 1098.250 1 0.45 494.21
Grid 34-50 1 5276.000 1 0.45 2374.20
Tunnel wall Grid 1-14* 1 292.600 0.45 3.4 447.68
Grid 34-50 1 460.000 0.45 3.4 703.80
tunnel top Grid 1-14* 1 959.170 1 0.45 431.63
Grid 34-50 1 1072.600 1 0.45 482.67
4934.19
B Height Qty
RETAINING WALL Nos. L (m)
(m) (m) (CUM)
Foundation level to basement level (mezz area) 1 99.74 0.35 2.6 34.91
34.91
B Height Qty
LIFT PIT WALL Nos. L (m)
(m) (m) (CUM)
Foundation level to apron level 1 83.895 0.2 10 16.78
Foundation level to basement level 1 26.882 0.2 2.6 5.38
22.16
Grade Slab Nos. Area (m2) B (m) Depth (m) Qty (CUM)
Basement Grid 15-34 1 22450 1 0.2 4490.00
4490.00
area Qty
GRADE SLAB Nos. thickness (m)
(SQM) (CUM)
B/W Grid 5- 7(Grid B-N) 150mm 1 279.225 0.15 41.88
1 139.6125 0.15 20.94
B/W Grid 7-11 (Grid B-N) 150mm 12 289 0.15 520.20
B/W Grid 11-14 (Grid B-N) 150mm 5 279.225 0.15 209.42
150mm 5 138.125 0.15 103.59
150mm 2 64 0.15 19.20
B/W Grid 34-36 (Grid B-N) 150mm 5 302.09 0.15 226.57
150mm 1 64 0.15 9.60
B/W Grid 36-38 (Grid B-N) 150mm 5 289 0.15 216.75
150mm 1 136 0.15 20.40
B/W Grid 38-40 (Grid B-N) 150mm 5 279.225 0.15 209.42
150mm 1 136 0.15 20.40
B/W Grid 40-42 (Grid B-N) 150mm 4 279.225 0.15 167.54
150mm 2 131.4 0.15 39.42
B/W Grid 42-44 (Grid B-N) 150mm 2 289 0.15 86.70
150mm 2 144.5 0.15 43.35
B/W Grid 44-46(Grid B-N) 150mm 2 131.4 0.15 39.42
B/W Grid 46-48(Grid B-N) 150mm 1 151.93125 0.15 22.79
150mm 1 136 0.15 20.40
2037.99
348.23
11447.89
Qty
SLAB Nos. area (SQM) thickness (m)
(CUM)
B/W Grid 15-17 (Grid J-H) 200mm 1 145.8 0.2 29.160
200mm 1 151.2 0.2 30.240
B/W Grid 17-19 (Grid J-H) 200mm 2 151.2 0.2 60.480
B/W Grid 19-21 (Grid J-H) 200mm 1 145.8 0.2 29.160
1 151.2 0.2 30.240
B/W Grid 21-23 (Grid J-H) 200mm 1 145.8 0.2 29.160
200mm 1 151.2 0.2 30.240
B/W Grid 23-25 (Grid J-H) 200mm 1 151.2 0.2 30.240
200mm 1 127 0.2 25.400
B/W Grid 25-28 (Grid J-H) 200mm 3 151.2 0.2 90.720
B/W Grid 28-30 (Grid J-H) 200mm 2 151.2 0.2 60.480
B/W Grid 30-31(Grid J-H) 200mm 1 116 0.2 23.200
ramp 200mm 1 140 0.2 28.000
B/W Grid 31-32(Grid J-H) 200mm 1 82.75 0.2 16.550
B/W Grid 32-33 (Grid J-H) 200mm 1 85.3 0.2 17.060
2046.85 530.33
Qty
SLAB Nos. area (SQM) thickness (m)
(CUM)
B/W Grid 5-7 (Grid B-N) 200mm 2 131.4 0.2 52.56
B/W Grid 7-11 (Grid B-N) 200mm 2 131.4 0.2 52.56
B/W Grid 11-13 (Grid B-N) 200mm 1 131.4 0.2 26.28
B/W Grid 13-15 (Grid B-N) 200mm 5 138.125 0.2 138.13
200mm 2 107.4 0.2 42.96
B/W Grid 15-19 (Grid B-N) 200mm 10 289 0.2 578.00
200mm 2 136 0.2 54.40
B/W Grid 19-21 (Grid B-N) 200mm 10 279.225 0.2 558.45
200mm 2 131.4 0.2 52.56
B/W Grid 21-25 (Grid B-N) 200mm 4 131.4 0.2 105.12
200mm 4 136 0.2 108.80
200mm 4 279.225 0.2 223.38
200mm 4 289 0.2 231.20
B/W Grid 25-28 (Grid B-N) 200mm 3 64 0.2 38.40
200mm 3 84.8 0.2 50.88
200mm 9 136 0.2 244.80
B/W Grid 28-30 (Grid B-N) 200mm 6 136 0.2 163.20
200mm 3 289 0.2 173.40
B/W Grid 30-32 (Grid B-N) 200mm 6 131.4 0.2 157.68
200mm 3 279.225 0.2 167.54
B/W Grid 32-34 (Grid B-N) 200mm 2 131.4 0.2 52.56
200mm 5 279.225 0.2 279.23
B/W Grid 34-36 (Grid B-N) 200mm 1 182.45 0.2 36.49
B/W Grid 36-38 (Grid B-N) 200mm 1 136 0.2 27.20
B/W Grid 38-40 (Grid B-N) 200mm 1 131.4 0.2 26.28
B/W Grid 40-48 (Grid B-N) 200mm 4 131.4 0.2 105.12
4423.275 3747.17
Qty
STAIRCASE Nos. factor Area (SQM) Thickness (m)
(CUM)
B/W Grid 32-33 (Grid H-J) 175 MM 1 2.5 28.74 0.175 12.574
28.74 12.57
Qty
STAIRCASE Nos. factor Area (SQM) Thickness (m)
(CUM)
B/W Grid 3-13 200mm 1 2.5 137 0.175 59.938
B/W Grid 13-21 200mm 1 2.5 60.4 0.175 26.425
B/W Grid 21-32 200mm 1 2.5 84.92 0.175 37.153
B/W Grid 32-40 200mm 1 2.5 60.4 0.175 26.425
B/W Grid 40-50 200mm 1 2.5 116.1 0.175 50.794
PBB 200mm 14 2.5 9.3 0.175 56.963
468.12 257.70
M25-Concrete QTY(Cu.m)
Footing+ RW
48290.59
foundation
Service Tunnel 4934.19
Retaining wall+
6315.15
lift pit wall
Shear Wall (upto
1264.55
plinth)
Column (upto
2960.56
plinth)
Grade Slab
6527.99
(upto plinth)
All works upto plinth Beams (upto
11796.12
level plinth))
Slab (upto
4277.50
plinth)
Staircase (upto
270.27
plinth)
Total 86636.91
Add for misc 2% 1732.74
Total 88369.65
Take 88400
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix,
manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as
per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of
centering, shuttering and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/manufacturer's
23
specifications/ approved design mix retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-
in-charge.
(Note: Cement content considered in this item is 330 Kg/cum. Excess/less cement used as per design mix is payable /recoverable separately)
All works above plinth level upto floor V level .
424.52
B Height Qty
Beam Ref. nos. L (m)
(m) (m) (CUM)
Along Grid B (B/W Grid 5-14) 400x1200 1 35.405 0.4 1.2 16.99
B/W Grid B-D (B/W Grid 5-21) 400x1200 3 33.425 0.4 1 40.11
Along Grid D (B/W Grid 5-21) 1000x1200 1 50.425 1 1.2 60.51
B/W Grid D-F (B/W Grid 5-21) 400x1200 2 50.425 0.4 1 40.34
400x1200 1 117.275 0.4 1 46.91
1000x1200 2 16.425 1 1.2 39.42
1000x1200 1 18.368 1 1.2 22.04
400x1200 1 12 0.4 1.2 5.76
600x1200 1 7.3 0.6 1.2 5.26
B/W Grid E-F (B/W Grid 5-7) 200x600 1 31.475 0.2 1 6.30
Along Grid F (B/W Grid 5-7) 350x600 1 14.454 0.35 1.2 6.07
Along Grid F (B/W Grid 5-21) 1000x1200 1 117.275 1 1.2 140.73
B/W Grid F-G (B/W Grid 5-21) 400x1200 2 133.7 0.4 1 106.96
400x1200 1 113.15 0.4 1 45.26
200x1200 1 12.075 0.2 1 2.42
Along Grid B (B/W Grid 34-40) 400x1200 1 38.424 0.4 1.2 18.44
B/W Grid B-C (B/W Grid 21-40) 400x1200 1 40 0.4 1 16.00
Along Grid C (B/W Grid 21-40) 1000x1200 1 40 1 1.2 48.00
B/W Grid C-D (B/W Grid 21-40) 400x1200 1 16 0.4 1 6.40
Along Grid D (B/W Grid 21-40) 1000x1200 1 16 1 1.2 19.20
B/W Grid D-E (B/W Grid 21-40) 400x1200 1 16 0.4 1 6.40
Along Grid E (B/W Grid 21-40) 1000x1200 1 83.075 1 1.2 99.69
400x1200 1 46.129 0.4 1 18.45
400x1200 1 16.425 0.4 1 6.57
B/W Grid E-F (B/W Grid 21-40) 400x1200 1 133.7 0.4 1 53.48
Along Grid F (B/W Grid 21-40) 1000x1200 1 231.375 1 1.2 277.65
B/W Grid F-G (B/W Grid 28-40) 400x1200 1 100.975 0.4 1 40.39
B/W Grid F-G (B/W Grid 21-25) 200x1200 1 23.487 0.2 1 4.70
400x1200 1 18.72 0.4 1 7.49
Along Grid G (B/W Grid 21-40) 400x1200 1 154.83 0.4 1 61.93
B/W Grid G-H (B/W Grid 21-40) 400x1200 1 126.887 0.4 1 50.75
200x1200 1 24.25 0.2 1 4.85
Along Grid H (B/W Grid 21-40) 1000x1200 1 124.4 1 1.2 149.28
350x1200 1 27.468 0.35 1 9.61
B/W Grid H-J (B/W Grid 21-40) 400x1200 3 7.725 0.4 1 9.27
Along Grid J (B/W Grid 21-40) 1000x1200 1 16.425 1 1.2 19.71
B/W Grid J-L (B/W Grid 21-40) 400x1200 1 7.725 0.4 1 3.09
400x1200 1 31.764 0.4 1 12.71
200x1200 2 10 0.2 1 4.00
400x1200 1 32.764 0.4 1 13.11
Along Grid L (B/W Grid 21-40) 1000x1200 1 50.425 1 1.2 60.51
400x1200 1 8.925 0.4 1 3.57
B/W Grid L-M (B/W Grid 21-40) 400x1200 1 109.275 0.4 1.2 52.45
400x1200 1 158.93 0.4 1.2 76.29
Along Grid M (B/W Grid 21-40) 1000x1200 1 159.7 1 1.2 191.64
7072.39
L B D Qty
Beam Ref. nos.
(m) (m) (m) (CUM)
Along Grid A' (B/W Grid 5-21) 1000x1200 1 133.7 1 1.2 160.44
B/W Grid A'-A (B/W Grid 5-21) 400x1200 1 13.128 0.4 1 5.25
400x1200 1 25.978 0.4 1 10.39
400x1200 1 26.194 0.4 1 10.48
400x1200 1 22.72 0.4 1 9.09
400x1200 1 24.897 0.4 1 9.96
400x1200 1 99.7 0.4 1 39.88
1000x1200 1 120.241 1 1.2 144.29
400x1200 1 43.57 0.4 1.2 20.91
300x1200 1 15.96 0.4 1.2 7.66
Along Grid A (B/W Grid 5-7) 1000x1200 1 9.172 1 1.2 11.01
Along Grid B (B/W Grid 5-21) 1000x1200 1 83.275 1 1.2 99.93
B/W Grid B-D (B/W Grid 5-21) 400x1200 1 106.171 0.4 1 42.47
400x1200 1 50.65 0.4 1.2 24.31
400x1200 1 110.31 0.4 1 44.12
400x1200 1 95.43 0.4 1 38.17
1000x1200 1 83.90 1 1.2 100.68
Along Grid D (B/W Grid 5-21) 1000x1200 1 66.85 1 1.2 80.22
B/W Grid D-F (B/W Grid 5-21) 400x1200 1 78.85 0.4 1 31.54
1000x1200 1 18.368 1 1.2 22.04
600x1200 1 65.975 0.6 1 39.59
600x1200 1 16.776 0.6 1 10.07
600x1200 1 14.47 0.6 1.2 10.42
Along Grid E (B/W Grid 5-21) 400x1200 1 50.425 0.4 1 20.17
1000x1200 1 32.85 1 1.2 39.42
B/W Grid E-F (B/W Grid 5-7) 200x600 2 31.475 0.2 1 12.59
400x1200 1 99.275 0.4 1 39.71
Along Grid F (B/W Grid 5-7) 350x600 1 14.454 0.35 1 5.06
Along Grid F (B/W Grid 7-21) 1000x1200 1 116.875 1 1.2 140.25
B/W Grid F-G (B/W Grid 5-21) 400x1200 2 133.7 0.4 1 106.96
B/W Grid F-G (B/W Grid 5-21) 400x1200 1 138.275 0.4 1 55.31
B/W Grid G-H (B/W Grid 12-13) 300x1200 1 4.145 0.3 1 1.24
200x1200 2 2.55 0.2 1 1.02
Along Grid H (B/W Grid 5-21) 1000x1200 1 117.275 1 1.2 140.73
Along Grid H (B/W Grid 5-21) 600x1200 1 16 0.6 1.2 11.52
B/W Grid H-J (B/W Grid 5-21) 400x1200 3 133.7 0.4 1 160.44
Along Grid J (B/W Grid 5-21) 1000x1200 1 133.7 1 1.2 160.44
Along Grid A' (B/W Grid 34-40) 1000x1200 1 159.7 1 1.2 191.64
B/W Grid A'-A (B/W Grid 21-40) 1000x1200 1 148.287 1 1.2 177.94
400x1200 2 60 0.4 1 48.00
400x1200 1 49.653 0.4 1 19.86
400x1200 1 49.735 0.4 1 19.89
1000x1200 1 43.574 1 1.2 52.29
400x1200 1 39.518 0.4 1.2 18.97
300x1200 1 16.35 0.3 1.2 5.89
400x1200 1 32.85 0.4 1 13.14
400x1200 1 66.85 0.4 1 26.74
Along Grid B (B/W Grid 34-40) 1000x1200 1 66.85 1 1.2 80.22
B/W Grid B-C (B/W Grid 21-40) 400x1200 1 99.232 0.4 1.2 47.63
400x1200 1 64 0.4 1 25.60
400x1200 1 22.255 0.4 1 8.90
400x1200 1 57.19 0.4 1 22.88
1000x1200 1 54.445 1 1 54.45
Along Grid C (B/W Grid 21-40) 1000x1200 1 89.425 1 1.2 107.31
400x1200 1 52.208 0.4 1 20.88
9491.245 3087.35
Qty
SLAB Nos. area (SQM) thickness (m)
(CUM)
B/W Grid 5-7 (Grid B-N) 200mm 3 279.225 0.2 167.54
200mm 3 131.4 0.2 78.84
200mm 1 54.2025 0.2 10.84
200mm 1 246.93 0.2 49.39
B/W Grid 7-11 (Grid B-N) 200mm 12 289 0.2 693.60
200mm 1 140.53 0.2 28.11
B/W Grid 11-15 (Grid B-N) 200mm 7 279.225 0.2 390.92
200mm 2 185.6025 0.2 74.24
200mm 1 1091.44 0.2 218.29
B/W Grid 15-19 (Grid B-N) 200mm 12 289 0.2 693.60
200mm 2 136 0.2 54.40
B/W Grid 19-21 (Grid B-N) 200mm 6 279.225 0.2 335.07
200mm 2 131.4 0.2 52.56
B/W Grid 21-25 (Grid B-N) 200mm 1 574.74 0.2 114.95
200mm 4 64 0.2 51.20
200mm 4 136 0.2 108.80
200mm 2 568.225 0.2 227.29
200mm 2 192.1 0.2 76.84
B/W Grid 25-28 (Grid B-N) 200mm 1 388.9 0.2 77.78
200mm 3 208 0.2 124.80
200mm 1 1196 0.2 239.20
Qty
STAIRCASE Nos. factor Area (SQM) Thickness (m)
(CUM)
B/W Grid 3-13 200mm 1 2.5 137 0.175 59.938
B/W Grid 13-21 200mm 1 2.5 60.4 0.175 26.425
B/W Grid 21-32 200mm 1 2.5 84.92 0.175 37.153
B/W Grid 32-40 200mm 1 2.5 60.4 0.175 26.425
B/W Grid 40-50 200mm 1 2.5 116.1 0.175 50.794
PBB 200mm 14 2.5 9.3 0.175 56.963
468.12 257.70
Qty
STAIRCASE Nos. factor Area (SQM) Thickness (m)
(CUM)
B/W Grid 5-13 200mm 1 2.5 137 0.175 59.938
B/W Grid 13-21 200mm 1 2.5 60.4 0.175 26.425
B/W Grid 21-32 200mm 1 2.5 84.92 0.175 37.153
B/W Grid 32-40 200mm 1 2.5 60.4 0.175 26.425
B/W Grid 40-50 200mm 1 2.5 116.1 0.175 50.794
458.82 200.73
QTY(Cu.m)
Shear Wall (above
1970.07
plinth)
Column (above
6361.32
plinth)
Beams (above
20556.78
plinth))
Slab (above plinth) 16237.97
All works above
plinth level Staircase (above
458.43
plinth)
Total 45584.57
Add for misc 2% 911.69
Total 46496.27
Take 46500
Steel reinforcement for R.C.C. work ready to use " cut and bend " rebars of approved make from factory/ workshop to construction site including placing in
position and binding with binding wire all complete .
27 Upto Plinth Level
Thermo-Mechanically Treated bars (Fe 500-D) or more
Steel reinforcement for R.C.C. work ready to use " cut and bend " rebars of approved make from factory/ workshop to construction site including placing in
position and binding with binding wire all complete .
28 Below /Above Plinth Level
Thermo-Mechanically Treated bars (Fe 500-D) or more
QTY(Cu.m) Steel in MT
Shear Wall (above
1970.07 200 394.01
plinth)
Column (above
6361.32 300 1908.40
plinth)
Beams (above
20556.78 200 4111.36
plinth))
All works above Slab (above plinth) 16237.97 120 1948.56
plinth level Staircase (above
458.43 100 45.84
plinth)
Total 8408.17
Add for misc 2% 168.16
Total 8576.33
Take 8600.00
in Kg 8600000.00
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
29 Foundations, footings, bases of columns etc. for mass concrete.
Shuttering
Footing Nos. Depth (m) Perimeter (m)
(SQM)
F1 9200X9200 24 2.25 36.80 1987.20
F1A 9700X9200 4 2.25 37.80 340.20
F1B 10400X9200 7 2.25 39.20 617.40
F2 8400X8400 118 2.05 33.60 8127.84
F2-A OUTER 5250X5250 22 1.2 21.00 554.40
F2B-INNER 6750X6750 11 1.625 27.00 482.63
Shuttering
Service Tunnel Nos. Depth (m) Perimeter (m)
(SQM)
Tunnel base Grid 1-14* 1 0.45 276.00 124.20
Grid 34-50 1 0.45 336.86 151.59
Tunnel wall Grid 1-14* 1 3.4 292.60 1989.68
Grid 34-50 1 3.4 460.00 3128.00
tunnel top Grid 1-14* 1 0.45 959.17 959.17
Grid 34-50 1 0.45 1072.60 1072.60
7425.24
Footing+ RW
20400.66
foundation
Service Tunnel 7425.24
Total 27825.90
a Foundation
Add for misc 4.5% 1252.17
Total 29078.07
Take 29148 Sq.m
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
30 Walls (any thickness) including attached pilasters buttresses , plinth and string courses etc
Shuttering
RETAINING WALL Nos. Height (m) Perimeter (m)
(SQM)
Foundation level to apron level tapering wall 1 9 2648.92 23840.32
23840.316
Shuttering
RETAINING WALL Nos. Height (m) Perimeter (m)
(SQM)
Foundation level to basement level (mezz area) 1 2.6 199.48 518.65
518.648
Shuttering
LIFT PIT WALL Nos. Height (m) Perimeter (m)
(SQM)
Foundation level to apron level 1 10 167.79 1677.90
Foundation level to basement level 1 2.6 53.76 139.79
1817.686
Shuttering
SHEAR WALL Nos. Height (m) Perimeter (m)
(SQM)
B/W Grid 3-5 as/plan 1 9 22.06 198.54
1 9 28.50 256.50
1 9 27.68 249.08
1 9 66.40 597.60
B/W Grid 7-9 4 9 6.97 250.92
B/W Grid 12-13 1 9 28.10 252.90
B/W Grid 13-14 4 9 21.51 774.36
4 9 14.00 504.00
B/W Grid 22-24 1 9 56.05 504.45
1 9 29.14 262.26
B/W Grid 29-30 1 9 28.10 252.90
B/W Grid 25-37 2 9 10.97 197.46
2 9 10.97 197.46
B/W Grid 41-42 1 9 21.60 194.40
1 9 28.10 252.90
B/W Grid 48-50 1 9 30.05 270.45
1 9 20.20 181.80
Shuttering
SHEAR WALL Nos. Height (m) Perimeter (m)
(SQM)
B/W Grid 3-5 as/plan 1 6 22.06 132.36
1 6 28.50 171.00
1 6 27.68 166.05
1 6 66.40 398.40
B/W Grid 7-9 4 6 6.97 167.28
B/W Grid 12-13 1 6 28.10 168.60
B/W Grid 13-14 4 6 21.51 516.24
4 6 14.00 336.00
B/W Grid 22-24 1 6 56.05 336.30
1 6 29.14 174.84
B/W Grid 29-30 1 6 28.10 168.60
B/W Grid 25-37 2 6 10.97 131.64
2 6 10.97 131.64
B/W Grid 41-42 1 6 21.60 129.60
1 6 28.10 168.60
B/W Grid 48-50 1 6 30.05 180.30
1 6 20.20 121.20
1 6 52.80 316.80
PBB 7 6 26.60 1117.20
5032.650
Shuttering
SHEAR WALL Nos. Height (m) Perimeter (m)
(SQM)
B/W Grid 3-5 as/plan 1 5 22.06 110.30
1 5 28.50 142.50
1 5 27.68 138.38
1 5 66.40 332.00
B/W Grid 7-9 4 5 6.97 139.40
B/W Grid 12-13 1 5 28.10 140.50
B/W Grid 13-14 4 5 21.51 430.20
4 5 14.00 280.00
B/W Grid 22-24 1 5 56.05 280.25
1 5 29.14 145.70
B/W Grid 29-30 1 5 28.10 140.50
B/W Grid 25-37 2 5 10.97 109.70
2 5 10.97 109.70
B/W Grid 41-42 1 5 21.60 108.00
1 5 28.10 140.50
B/W Grid 48-50 1 5 30.05 150.25
1 5 20.20 101.00
1 5 52.80 264.00
PBB 7 5 26.60 931.00
4193.875
Shuttering
SHEAR WALL Nos. Height (m) Perimeter (m)
(SQM)
B/W Grid 3-5 as/plan 1 3.75 22.06 82.73
1 3.75 28.50 106.88
1 3.75 27.68 103.78
1 3.75 66.40 249.00
B/W Grid 7-9 4 3.75 6.97 104.55
B/W Grid 12-13 1 3.75 28.10 105.38
B/W Grid 13-14 4 3.75 21.51 322.65
4 3.75 14.00 210.00
B/W Grid 22-24 1 3.75 56.05 210.19
1 3.75 29.14 109.28
B/W Grid 29-30 1 3.75 28.10 105.38
B/W Grid 25-37 2 3.75 10.97 82.28
2 3.75 10.97 82.28
B/W Grid 41-42 1 3.75 21.60 81.00
1 3.75 28.10 105.38
B/W Grid 48-50 1 3.75 30.05 112.69
1 3.75 20.20 75.75
1 3.75 52.80 198.00
2447.156
RW (tapering upto
23840.32
apron lvl.)
RW (Found. to
518.65
basement)
Lift pit wall 1817.69
b Walls
Shear Wall 19222.66
Total 45399.31
Add for misc 2% 907.99
Total 46307.29
2046.85 2651.650
Shuttering
SLAB Nos. area (SQM)
(SQM)
B/W Grid 5-7 (Grid B-N) 200mm 2 131.4 262.800
B/W Grid 7-11 (Grid B-N) 200mm 2 131.4 262.800
B/W Grid 11-13 (Grid B-N) 200mm 1 131.4 131.400
B/W Grid 13-15 (Grid B-N) 200mm 5 138.125 690.625
200mm 2 107.4 214.800
B/W Grid 15-19 (Grid B-N) 200mm 10 289 2890.000
200mm 2 136 272.000
B/W Grid 19-21 (Grid B-N) 200mm 10 279.225 2792.250
200mm 2 131.4 262.800
B/W Grid 21-25 (Grid B-N) 200mm 4 131.4 525.600
200mm 4 136 544.000
200mm 4 279.225 1116.900
200mm 4 289 1156.000
B/W Grid 25-28 (Grid B-N) 200mm 3 64 192.000
200mm 3 84.8 254.400
200mm 9 136 1224.000
B/W Grid 28-30 (Grid B-N) 200mm 6 136 816.000
200mm 3 289 867.000
B/W Grid 30-32 (Grid B-N) 200mm 6 131.4 788.400
200mm 3 279.225 837.675
B/W Grid 32-34 (Grid B-N) 200mm 2 131.4 262.800
200mm 5 279.225 1396.125
B/W Grid 34-36 (Grid B-N) 200mm 1 182.45 182.450
B/W Grid 36-38 (Grid B-N) 200mm 1 136 136.000
B/W Grid 38-40 (Grid B-N) 200mm 1 131.4 131.400
B/W Grid 40-48 (Grid B-N) 200mm 4 131.4 525.600
4423.275 18735.825
Shuttering
SLAB Nos. area (SQM)
(SQM)
B/W Grid 5-7 (Grid B-N) 200mm 1 432.01 432.010
B/W Grid 7-11 (Grid B-N) 200mm 4 279.65 1118.600
200mm 1 250.56 250.560
200mm 1 183 183.000
200mm 1 250.56 250.560
200mm 1 311.1 311.100
B/W Grid 11-15 (Grid B-N) 200mm 3 279.225 837.675
200mm 1 188.5 188.500
200mm 4 131.4 525.600
B/W Grid 15-19 (Grid B-N) 200mm 2 289 578.000
200mm 4 131.4 525.600
200mm 2 104.8 209.600
B/W Grid 19-21 (Grid B-N) 200mm 1 279.225 279.225
200mm 3 131.4 394.200
B/W Grid 21-25 (Grid B-N) 200mm 2 131.4 262.800
200mm 1 441.18 441.180
200mm 1 111.3475 111.348
200mm 1 171.4 171.400
B/W Grid 25-28 (Grid B-N) 200mm 1 153.9 153.900
200mm 1 273 273.000
200mm 1 186.1 186.100
B/W Grid 28-30 (Grid B-N) 200mm 1 171.4 171.400
200mm 1 340 340.000
200mm 1 45.9 45.900
B/W Grid 30-32 (Grid B-N) 200mm 1 470.9 470.900
B/W Grid 32-34 (Grid B-N) 200mm 1 444.3 444.300
9491.245 15564.493
Shuttering
SLAB Nos. area (SQM)
(SQM)
B/W Grid 5-7 (Grid B-N) 200mm 3 279.225 837.675
200mm 3 131.4 394.200
200mm 1 54.2025 54.203
200mm 1 246.93 246.930
B/W Grid 7-11 (Grid B-N) 200mm 12 289 3468.000
200mm 1 140.53 140.530
B/W Grid 11-15 (Grid B-N) 200mm 7 279.225 1954.575
200mm 2 185.6025 371.205
200mm 1 1091.44 1091.440
B/W Grid 15-19 (Grid B-N) 200mm 12 289 3468.000
200mm 2 136 272.000
B/W Grid 19-21 (Grid B-N) 200mm 6 279.225 1675.350
200mm 2 131.4 262.800
B/W Grid 21-25 (Grid B-N) 200mm 1 574.74 574.740
200mm 4 64 256.000
200mm 4 136 544.000
200mm 2 568.225 1136.450
200mm 2 192.1 384.200
B/W Grid 25-28 (Grid B-N) 200mm 1 388.9 388.900
200mm 3 208 624.000
200mm 1 1196 1196.000
B/W Grid 28-32 (Grid B-N) 200mm 1 497.6 497.600
200mm 4 64 256.000
200mm 2 136 272.000
200mm 6 289 1734.000
200mm 2 204 408.000
B/W Grid 32-36 (Grid B-N) 200mm 1 1345.64 1345.640
200mm 8 289 2312.000
B/W Grid 36-40 (Grid B-N) 200mm 1 1345.64 1345.640
200mm 8 289 2312.000
B/W Grid 40-44 (Grid B-N) 200mm 1 923.25 923.250
200mm 5 289 1445.000
200mm 4 136 544.000
200mm 2 56.1 112.200
B/W Grid 44-46 (Grid B-N) 200mm 5 289 1445.000
200mm 1 259.76 259.760
B/W Grid 46-52(Grid B-N) 200mm 1 198.3 198.300
200mm 4 279.225 1116.900
200mm 3 131.4 394.200
200mm 2 54.2025 108.405
B/W Grid 48-50(Grid K-N) 200mm 1 54.2025 54.203
B/W Grid 50-56(Grid K-N) 200mm 1 55.77 55.770
200mm 1 136 136.000
200mm 2 89.6 179.200
200mm 1 131.4 131.400
B/W Grid 56-62(Grid K-N) 200mm 1 54.2025 54.203
200mm 1 139.1 139.100
B/W Grid 62-64(Grid K-N) 200mm 1 131.4 131.400
200mm 1 120 120.000
B/W Grid 64-68(Grid K-N) 200mm 1 99.8025 99.803
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
33 Lintels, beams, plinth beams, girders, bressumers and cantilevers.
Shuttering
Beam Ref. nos. l (m) Perimeter (m)
(SQM)
Along Grid H & J (Grid 15-33) 600x600 2 133.022 1.80 478.88
350x600 1 3.98 1.55 6.17
Along Grid I (Grid 14-34) 300x600 1 144.688 1.10 159.16
B/W Grid H-I (Grid 14-34) 600x600 1 124.8 1.40 174.72
450x600 1 8.1 1.10 8.91
300x600 2 8.0 1.10 17.60
B/W Grid I-J (Grid 14-34) 600x600 1 124.9 1.40 174.86
600x600 1 20.0 1.40 28.06
350x600 1 19.2 1.55 29.76
Along Grid 15 (Grid J-H)& similar 600x600 20 15.76 1.80 567.36
300x600 15 16.5 1.10 272.25
300x600 3 16.58 1.50 74.59
B/W Grid 30-31 (Grid J-H) 600x600 1 15.76 1.80 28.37
B/W Grid 31-33 (Grid J-H) 300x600 4 10 1.10 44.00
2064.682
Shuttering
Beam Ref. nos. L (m) Perimeter (m)
(SQM)
Along Grid A' (B/W Grid 3-21) 750x750 1 151.575 2.25 341.04
Along Grid A (B/W Grid 5-21) 750x750 1 82.275 2.25 185.12
750x750 1 34.00 2.25 76.50
Along 5&similar ( B/W grid A'-B) 750x750 11 26 2.25 643.50
750x750 1 8 2.25 18.00
Along Grid A' (B/W Grid 21-40) 750x750 1 160 2.25 360.00
Along Grid A (B/W Grid 5-21) 750x750 1 160 2.25 360.00
Along 23&similar ( B/W grid A'-B) 750x750 11 26 2.25 643.50
Along Grid A' (B/W Grid 40-52) 750x750 1 101.425 2.25 228.21
Along Grid A (B/W Grid 40-48) 750x750 1 49.425 2.25 111.21
Along 41&similar ( B/W grid A'-B) 750x750 4 26 2.25 234.00
Along Grid B (B/W Grid 5-14) 1000x1200 1 75.975 3.40 258.32
B/W Grid B-D (B/W Grid 5-21) 400x1200 2 133.4 2.40 640.32
400x1200 1 125.28 2.40 300.66
Along Grid D (B/W Grid 5-21) 1000x1200 1 132.4 3.40 450.16
B/W Grid D-F (B/W Grid 5-21) 400x1200 1 160.798 2.40 385.92
600x1200 1 7.3 2.60 18.98
400x1200 1 124.975 2.40 299.94
1000x1200 1 57.398 3.40 195.15
400x1200 1 133.4 2.40 320.16
B/W Grid E-F (B/W Grid 5-7) 200x600 1 31.475 2.20 69.25
Along Grid F (B/W Grid 5-7) 350x600 1 14.454 2.35 33.97
Along Grid F (B/W Grid 5-21) 1000x1200 1 116.575 3.40 396.36
B/W Grid F-G (B/W Grid 5-21) 400x1200 1 149.825 2.40 359.58
B/W Grid F-G (B/W Grid 6-7) 400x1200 3 6.05 2.40 43.56
Along Grid G (B/W Grid 5-21) 400x1200 1 120.55 2.40 289.32
B/W Grid G-H (B/W Grid 5-21) 400x1200 1 117.275 2.40 281.46
B/W Grid G-H (B/W Grid 6-7) 400x1200 3 6.05 2.40 43.56
B/W Grid G-H (B/W Grid 12-13) 200x1200 1 12.075 2.20 26.57
Along Grid H (B/W Grid 5-21) 1000x1200 1 117.275 3.40 398.74
Along Grid H (B/W Grid 5-21) 600x1200 1 11 2.60 28.60
B/W Grid H-I (B/W Grid 5-21) 400x1200 2 116.975 2.40 561.48
400x1200 1 115.975 2.40 278.34
300x1200 2 3.95 2.30 18.17
Along Grid J (B/W Grid 5-21) 1000x1200 1 133.7 3.40 454.58
B/W Grid J-L(B/W Grid 5-21) 400x1200 1 103.925 2.40 249.42
400x1200 1 116.975 2.40 280.74
400x1200 1 117.575 2.40 282.18
600x1200 1 16.425 2.60 42.71
47991.060
Shuttering
Beam Ref. nos. L (m) Perimeter (m)
(SQM)
Along Grid B (B/W Grid 5-14) 400x1200 1 35.405 2.80 99.13
B/W Grid B-D (B/W Grid 5-21) 400x1200 3 33.425 2.40 240.66
Along Grid D (B/W Grid 5-21) 1000x1200 1 50.425 3.40 171.45
B/W Grid D-F (B/W Grid 5-21) 400x1200 2 50.425 2.40 242.04
400x1200 1 117.275 2.40 281.46
1000x1200 2 16.425 3.40 111.69
1000x1200 1 18.368 3.40 62.45
400x1200 1 12 2.80 33.60
Shuttering
Beam Ref. nos. L (m) Perimeter (m)
(SQM)
Along Grid A' (B/W Grid 5-21) 1000x1200 1 133.7 3.40 454.58
B/W Grid A'-A (B/W Grid 5-21) 400x1200 1 13.128 2.40 31.51
400x1200 1 25.978 2.40 62.35
400x1200 1 26.194 2.40 62.87
400x1200 1 22.72 2.40 54.53
400x1200 1 24.897 2.40 59.75
400x1200 1 99.7 2.40 239.28
1000x1200 1 120.241 3.40 408.82
400x1200 1 43.57 2.80 122.00
300x1200 1 15.96 2.80 44.69
Along Grid A (B/W Grid 5-7) 1000x1200 1 9.172 3.40 31.18
Along Grid B (B/W Grid 5-21) 1000x1200 1 83.275 3.40 283.14
B/W Grid B-D (B/W Grid 5-21) 400x1200 1 106.171 2.40 254.81
400x1200 1 50.65 2.80 141.82
400x1200 1 110.31 2.40 264.73
400x1200 1 95.43 2.40 229.02
1000x1200 1 83.90 3.40 285.27
Along Grid D (B/W Grid 5-21) 1000x1200 1 66.85 3.40 227.29
B/W Grid D-F (B/W Grid 5-21) 400x1200 1 78.85 2.40 189.24
1000x1200 1 18.368 3.40 62.45
600x1200 1 65.975 2.60 171.54
600x1200 1 16.776 2.60 43.62
600x1200 1 14.47 3.00 43.41
Along Grid E (B/W Grid 5-21) 400x1200 1 50.425 2.40 121.02
1000x1200 1 32.85 3.40 111.69
B/W Grid E-F (B/W Grid 5-7) 200x600 2 31.475 2.20 138.49
400x1200 1 99.275 2.40 238.26
Along Grid F (B/W Grid 5-7) 350x600 1 14.454 2.35 33.97
Along Grid F (B/W Grid 7-21) 1000x1200 1 116.875 3.40 397.38
B/W Grid F-G (B/W Grid 5-21) 400x1200 2 133.7 2.40 641.76
B/W Grid F-G (B/W Grid 5-21) 400x1200 1 138.275 2.40 331.86
Along Grid A' (B/W Grid 34-40) 1000x1200 1 159.7 3.40 542.98
B/W Grid A'-A (B/W Grid 21-40) 1000x1200 1 148.287 3.40 504.18
400x1200 2 60 2.40 288.00
400x1200 1 49.653 2.40 119.17
400x1200 1 49.735 2.40 119.36
1000x1200 1 43.574 3.40 148.15
400x1200 1 39.518 2.80 110.65
300x1200 1 16.35 2.70 44.15
400x1200 1 32.85 2.40 78.84
400x1200 1 66.85 2.40 160.44
Along Grid B (B/W Grid 34-40) 1000x1200 1 66.85 3.40 227.29
B/W Grid B-C (B/W Grid 21-40) 400x1200 1 99.232 2.80 277.85
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
34 Columns, Pillars, Piers, Abutments, Posts and Struts.
Foundation to
10952.55
apron level
Apron to Arrival
10029.30
level
Arrival to departure
7458.75
level
Columns
Departure to roof
6897.78
level
Total 35338.38
Add for misc 2% 706.77
Total 36045.15
Take 36100.00
Shuttering
STAIRCASE Nos. factor Area (SQM)
(SQM)
B/W Grid 32-33 (Grid H-J) 175 MM 1 2.5 28.74 71.850
28.74 71.850
Shuttering
STAIRCASE Nos. factor Area (SQM)
(SQM)
B/W Grid 3-13 200mm 1 2.5 137 342.500
B/W Grid 13-21 200mm 1 2.5 60.4 60.400
B/W Grid 21-32 200mm 1 2.5 84.92 84.920
B/W Grid 32-40 200mm 1 2.5 60.4 60.400
B/W Grid 40-50 200mm 1 2.5 116.1 116.100
PBB 200mm 14 2.5 9.3 325.500
468.12 989.820
Shuttering
STAIRCASE Nos. factor Area (SQM)
(SQM)
B/W Grid 3-13 200mm 1 2.5 137 342.500
B/W Grid 13-21 200mm 1 2.5 60.4 151.000
B/W Grid 21-32 200mm 1 2.5 84.92 212.300
B/W Grid 32-40 200mm 1 2.5 60.4 151.000
B/W Grid 40-50 200mm 1 2.5 116.1 290.250
PBB 200mm 14 2.5 9.3 325.500
468.12 1472.550
Shuttering
STAIRCASE Nos. factor Area (SQM)
(SQM)
B/W Grid 5-13 200mm 1 2.5 137 342.500
B/W Grid 13-21 200mm 1 2.5 60.4 151.000
B/W Grid 21-32 200mm 1 2.5 84.92 212.300
B/W Grid 32-40 200mm 1 2.5 60.4 151.000
B/W Grid 40-50 200mm 1 2.5 116.1 290.250
458.82 1147.050
Basement to apron
71.85
level
Apron to Arrival
989.82
level
Arrival to departure
1472.55
level
Staircase
Departure to roof
1147.05
level
Total 3681.27
Add for misc 2% 73.63
Total 3754.90
Take 3780.00
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
36 Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses,
bands, copings, bed plates, anchor blocks and the like.
L.S 1000.00 Sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
37 Edges of slab and breaks in floors and walls under 20 cms wide L.S 1000.00 R.mt
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
38 Weather shade, Chajjas, corbels etc., including edges.
L.S 500.00 Sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
39 Extra for shuttering in circular work (20% of respective centering and shuttering items)
L.S 40000.00 Sqm
Centering and shuttering including strutting, propping etc for all height/ Depth. and removal of form for :
40 Vertical and horizontal fins individually or forming box louvers band, facias and eaves boars.
L.S 500.00 Sqm
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering / centering at all
41 levels, over a height of 3.50 m, for every additional height of 1 metre or part thereof (Plan area to be measured).
Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
Total 304450.84
Add for misc 2% 310539.86
take 311000 Sq.m
Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC
structure, such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one
43 coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 liter per 240 running meter. Over the primed
surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the engineer-in-
charge. The product performance shall carry guaranteed for 5 years against any leakage.
water stoper for Basement Retaining wall
& Lift wall
length of retaining wall 7392
Lift wall 413
TOTAL 7805 R.mt
3 RCC WORK
44 Floor Expansion joint (150mm gap)
Apron/ Arrival & Dep level
( grid 5,13,21,32,40,48 ) 12 137.00 1644.00
grid 56, 64 4 20.00 80.00
Basement 2 107.00 214.00
misc 1 50.00 50.00
1988.00
TOTAL 1988.00 Metre
47 SIL-FIL board
Apron/ Arrival & Dep level
( grid 5,13,21,32,40,48 ) 12 137.00 1.200 1972.80
grid 56, 64 4 20.00 1.200 96.00
Basement 2 107.00 1.200 256.80
misc 1 50.00 1.200 60.00
2385.60 sqm
Say 2386.00 sqm
49 Add or deduct for using extra cement in the items of design mix over and above the specified cement
content therein L.S 100.00 quintal
50 Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof.
L.S 100.00 cum
51 Providing and fixing parallel threaded Coupler for 16 mm diameter reinforcement bar
L.S 4137.00 Nos
52 Providing and fixing parallel threaded Coupler for 20 mm diameter reinforcement bar
L.S 12412.00 Nos
53 Providing and fixing parallel threaded Coupler for 25 mm diameter reinforcement bar
L.S 33102.00 Nos
54 Providing and fixing parallel threaded Coupler for 28 mm diameter reinforcement bar
L.S 33102.00 Nos
Apron lvl
D1 30
D2 7
D3 70
D4 83
D5 9
Arrivals lvl
D1 14
D2 48
D3 17
D4 48
D5 9
Departures lvl
D1 21
D2 41
D3 13
D4 76
D5 10
Summary of Total no. of doors
D1( 800x2100) 95 0.80 2.10
D2( 850x2100) 103 0.85 2.10
D3 ( 1100x2100) 170 1.10 2.10
D4 ( 1800x2100) 290 1.80 2.10
D5 ( 2000x2100) 37 2.00 2.10
Apron lvl
FD1( stair with out lobby) 13
FD2 ( elect) 8
FD3 ( ahu) 7
Arrivals lvl
SS Tower Bolts
70 250 x 10mm
All floors No. / door
D1( 800x2100) 95 1 95
D2( 850x2100) 103 1 103
D3 ( 1100x2100) 170 1 170
D4 ( 1800x2100) 290 2 580
D5 ( 2000x2100) 37 2 74
1022 each
71 150 x 10mm
All floors No. / door
D1( 800x2100) 95 1 95
D2( 850x2100) 103 1 103
D3 ( 1100x2100) 170 1 170
D4 ( 1800x2100) 290 2 580
D5 ( 2000x2100) 37 2 74
1022 each
Basement lvl 1 6 6
Basement lvl 1 1 1
Apron lvl 1 8 8
Departures lvl 1 18 18
38.00 nos
Say 38.00 nos
80.0 Extra for Lipping same qty as flush door (Ref Item no. 66) 1988.00 sqm
81.0 Extra for vision panel same qty as flush door (Ref Item no. 66) 1988.00 sqm
87
SS HANDLE 125 mm L.S 250 nos
89 Rolling Shutter
TRF ROOM
RS1 4 4.00 3.50 56.00
56.00
Say 56.00 sqm
90 Ball Bearing
TRF ROOM No. / shutter
RS1 4 4 16
16
Say 16 each
92 Mechanical device
TRF ROOM
RS1 4 4.00 3.50 56.00
56.00
Say 56.00 sqm
L.S 1000 kg
94 MS Railling
STAIR CASE ( basement )
ST-01 to ST-9
Basement floor 18 9.10 1.00 163.80
extra for landing 36 4.31 1.00 155.16
MS Railling-Boundary wall
Main Gate-2 nos 2 6.00 6.00 100.00 7200.00 kg
Grating
(39.50+ 74.60+ 60.62+ 6.30+ 19.03+ 29.03+
100+ 150+ 250 =729.08 1 729.00 0.45 15.00 4920.75 kg
total 4920.75 kg
Say 4920.75 kg
TOTAL 19499.75
A 19500.00 kg
Total ( A+ B+ C) 75500.00 kg
95 Hand Rail over the Elevated Parapet
Considering 80mm dia Pipe, 4.0mm thick
@ 8.36 Kg/rmt
Providing, Fabricating, Assembling, Painting, Hoisting and Erecting in position including detailing of Tubular Structure, Purlins/ rafters consisting of MS Steel
tubular/hollow sections including , ISI marked from TATA/ SAIL / RINL/ Jindal/ Apollo/ Hi Tech or as approved make, conforming to IS 1161/4923, Grade
YST 310 and Rolled section & plates conforming to IS 2062 (Grade YST 250) in the profile shaped as per approved drawings with special plate connector,
pinion joints, Plates, hollow sections etc. using SAW/MAW/MIG welding process, including transportation, cutting, threading, machining, all leads and lifts up
to all heights, tools and plants and necessary scaffolding etc. required for all operations involved.
The structural members shall be painted ( external surface only) with 320 DFT anti-corrosive protection coating using as approved make with first coat of
primer barrier Zep grey 60 microns thick, second coat with Penguard express MIO red 180 microns thick and final coat of polyurethane paint 80 microns thick
(to be applied in two coats) with hard top XP white of which first coat shall be at ground and second coat after erection including touch-up of damaged area
96 of already painted surfaces if any, upto all heights including preparation of surface with grit/sand blasting upto Sa 2.5 grade (at least) of the structural steel
member and thorough cleaning of the surface before application of primer/paint.
The item shall be executed as per approved drawings and direction of the Engineer-in-Charge complete. (Note: The work shall be executed as per
manufacturer's specifications wherever applicable, relevant code of practice and sound engineering practice).
(Please note that the quoted rate is inclusive of lifting as required by using cranes of adequate capicity and scaffolding or by any other means complete in
all respects.)
Roof Truss
Structural steel quantity as per model 8.5 Kg/sqft
Additional for failing members 0.5 Kg/sqft
Splice & Base plate, etc. 1 Kg/sqft
Wind bracing 1 Kg/sqft
Purlins 1.5 Kg/sqft
Total 12.5 Kg/sqft
Drawing Reference - LKO_TD_B_STR_0100_DW_031 TO
DW_038
Roof area 62165 sqm
Total steel in roof 8361192.5 Kg
Total - A 8375000 Kg
33737.44 sqm
Wt of M.S structural work for Glazing,
ACP,etc 1 33737.44 40.00 1349497.55 kg
1349497.55
Say 1349498.00 kg
OR 1349.50 MT
Flooring works
Retail Units
Apron Level
DTF 1 98.57 length 0.15 14.79
F&D Unit-1 1 47.36 length 0.15 7.10
F&D Unit-2 1 34.76 length 0.15 5.21
F&D Unit-3 1 30.34 length 0.15 4.55
F&D Unit-4 1 28.57 length 0.15 4.29
F&D Unit-5 1 27.02 length 0.15 4.05
F&D Unit-6 1 53.22 length 0.15 7.98
F&D Unit-7 1 53.22 length 0.15 7.98
F&D Unit-8 1 27.39 length 0.15 4.11
F&D Unit-9 1 28.60 length 0.15 4.29
F&D Unit-10 1 26.67 length 0.15 4.00
F&D Unit-11 1 64.24 length 0.15 9.64
Retail-1 1 35.62 length 0.15 5.34
Retail-2 2 14.30 0.15 4.29
2 12.52 0.15 3.76
Retail-3 2 8.77 0.15 2.63
2 9.85 0.15 2.96
Retail-4 1 48.07 length 0.15 7.21
Retail-5 1 38.76 length 0.15 5.81
Retail-6 1 49.02 length 0.15 7.35
Retail-7 1 52.23 length 0.15 7.83
Retail-8 1 59.39 length 0.15 8.91
Retail-9 1 49.25 length 0.15 7.39
Retail-10 1 38.64 length 0.15 5.80
Retail-11 1 41.57 length 0.15 6.24
Retail-12 1 35.69 length 0.15 5.35
Retail-13 1 37.10 length 0.15 5.57
Grid -6
Toilet ( M) 1 3.75 0.90 3.38 3
Toilet ( F) 1 3.75 0.90 3.38 3
Grid -7
Staff toilet
Toilet ( M) 1 8.90 0.90 8.01 5
Toilet ( F) 1 8.80 0.90 7.92 5
Public toilet
Toilet ( M) 1 4.70 0.90 4.23 4
Toilet ( F) 1 4.70 0.90 4.23 4
Grid -20
Public toilet
Toilet ( M) 1 4.16 0.90 3.74 4
Toilet ( F) 1 3.85 0.90 3.47 4
Grid -24
Public toilet
Toilet ( M) 1 4.70 0.90 4.23 4
Toilet ( F) 1 4.70 0.90 4.23 4
Grid -28
Public toilet
Toilet ( M) 1 4.70 0.90 4.23 4
Toilet ( F) 1 4.70 0.90 4.23 4
Grid -35
Public toilet
Toilet ( F) 1 6.96 0.90 6.26 6
Toilet ( F) 1 6.96 0.90 6.26 6
Toilet ( M) 1 5.10 0.90 4.59 5
Toilet ( M) 1 5.10 0.90 4.59 5
Grid -41
Public toilet
Toilet ( M) 1 4.10 0.90 3.69 4
Toilet ( F) 1 4.10 0.90 3.69 4
Grid -45
Public toilet
Toilet ( M) 1 4.45 0.90 4.01 4
Toilet ( F) 1 4.45 0.90 4.01 4
c) Arrival level + 6.0
Grid -5
Toilet ( M) 1 4.10 0.90 3.69 4
Toilet ( F) 1 4.10 0.90 3.69 8
Grid -6
Toilet ( M) 1 8.10 0.90 7.29 8
Toilet ( F) 1 8.10 0.90 7.29 8
Grid -41
Toilet ( M) 1 8.10 0.90 7.29 8
Toilet ( F) 1 8.10 0.90 7.29 8
d) Dep level + 12.0
Grid -3
Toilet ( M) 1 4.10 0.90 3.69 4
Toilet ( F) 1 4.10 0.90 3.69 8
Grid -4
Toilet ( M) 1 3.44 0.90 3.10 4
Toilet ( F) 1 3.44 0.90 3.10 4
Grid -6
Toilet ( M) 1 9.10 0.90 8.19 8
Toilet ( F) 1 9.10 0.90 8.19 8
Toilet ( M) 2 3.68 0.90 6.62 8
Toilet ( F) 2 3.68 0.90 6.62 8
Grid -20
Toilet ( M) 1 4.42 0.90 3.98 4
Toilet ( F) 1 4.42 0.90 3.98 4
Grid -27
Toilet ( M) 2 3.75 0.90 6.75 8
Toilet ( F) 2 3.75 0.90 6.75 8
Grid -32
Toilet ( M) 2 4.33 0.90 7.79 4
Toilet ( F) 2 4.33 0.90 7.79 4
Grid -44
Toilet ( M) 2 3.75 0.90 6.75 8
Toilet ( F) 2 3.75 0.90 6.75 8
Grid -48
Toilet ( M) 2 3.75 0.90 6.75 8
Toilet ( F) 2 3.75 0.90 6.75 8
Grid -50
Toilet ( M) 2 3.60 0.90 6.48 4
Toilet ( F) 2 3.60 0.90 6.48 4
Grid -6
Toilet ( M) 1 3.75 3.75 3
Toilet ( F) 1 3.75 3.75 3
Grid -7
Staff toilet
Toilet ( M) 1 8.90 8.90 5
Toilet ( F) 1 8.80 8.80 5
Public toilet
Toilet ( M) 1 4.70 4.70 4
Toilet ( F) 1 4.70 4.70 4
Grid -20
Public toilet
Toilet ( M) 1 4.16 4.16 4
Toilet ( F) 1 3.85 3.85 4
Grid -24
Public toilet
Toilet ( M) 1 4.70 4.70 4
Toilet ( F) 1 4.70 4.70 4
Grid -28
Public toilet
Toilet ( M) 1 4.70 4.70 4
Toilet ( F) 1 4.70 4.70 4
Grid -35
Public toilet
Toilet ( F) 1 6.96 6.96 6
Toilet ( F) 1 6.96 6.96 6
Toilet ( M) 1 5.10 5.10 5
Toilet ( M) 1 5.10 5.10 5
Grid -41
Public toilet
Toilet ( M) 1 4.10 4.10 4
Toilet ( F) 1 4.10 4.10 4
Grid -45
Public toilet
Toilet ( M) 1 4.45 4.45 4
Toilet ( F) 1 4.45 4.45 4
Grid -6
Toilet ( M) 1 3 3
Toilet ( F) 1 3 3
Grid -7
Staff toilet
Toilet ( M) 1 5 5
Toilet ( F) 1 5 5
Public toilet
Toilet ( M) 1 4 4
Toilet ( F) 1 4 4
Grid -20
Public toilet
Toilet ( M) 1 4 4
Toilet ( F) 1 4 4
Grid -24
Public toilet
Toilet ( M) 1 4 4
Toilet ( F) 1 4 4
Grid -28
Public toilet
Toilet ( M) 1 4 4
Toilet ( F) 1 4 4
Grid -35
Public toilet
Toilet ( F) 1 6 6
Toilet ( F) 1 6 6
Toilet ( M) 1 5 5
Toilet ( M) 1 5 5
Grid -41
Public toilet
Toilet ( M) 1 4 4
Toilet ( F) 1 4 4
Grid -45
Public toilet
Toilet ( M) 1 4 4
Toilet ( F) 1 4 4
Arrival level
Dep level
Granite with ACP( with Green line)
Total length
Near International COACH GATE
Dep level
Granite with ACP( with Green line)
Total length
Near International COACH GATE
(5.50+ 3.0+ 2.15+ 3.12+ 10.45) =24.22mt 1 24.22 Length 1.00 24.22
Near corridor (Lift )
( 3.6*2+ 2.7*2)*10 =126.0 mt) 1 126 Length 1.00 126.00
International security land side ( 6.96+
18.08+ 13.72+ 10.47+ 57.76+ 25.51+
5.04*2+ 19.72+ 7.0+ 18.10+ 29.90 =217.30
mt) 1 217.3 Length 1.00 217.30
Domestic security land side ( 16.67+ 9.02+
11.16+ 71.938+ 16.82+ 9.0+ 11.206 =145.84
mt) 1 145.814 Length 1.00 145.81
near Domestic coach Gate ( 29.37+ 5.85+
2.90+ 2.15 =40.27 mt) 1 40.27 Length 1.00 40.27
Arrival level
57886.02
Say 57886.00 sqm
152 Gyp board False Ceiling
18277.50
Say 18278.00 sqm
28527.00
Say 28527.00 sqm
FINISHING WORKS
159 6mm thk. ceiling Plaster
8th floor
Basement Area 21100.00
Roof Beam 80.00% 16880.00
37980.00
Say 37980.00 sqm
FIXED GLAZING
Windows ( Exterrnal)
Level + 6 m
Grid M
28.42+ 32.40+ 10.20+ 47.67+ 44.25+ 10.78+
35.48+ 79.42+ 79.42+ 28.92+ 45.40+ 14.90+
14.90+ 5.40+ 5.40+ 31.10+ 4.20+ 4.20+
26.85+ 14.80+ 5.41+ 5.41+ 14.90+ 4.13+
5.75+ 25.0)
1 624.71 Length 3.50 2186.49 sqm
Grid M'
(78.03+ 52.66+ 292.32) 1 423.01 Length 3.50 1480.54 sqm
Grid L
242.55) 1 242.55 Length 3.50 848.93 sqm
Aero bridge corridor 21 15.01 Length 3.50 1103.24 sqm
Level + 12 m
Grid M
67.18+ 60.78+ 241.47+ 45.35+ 31.0+ 26.0+
50.0+ 41.80+ 25.10) 1 588.68 Length 3.50 2060.38 sqm
Grid L
(8.15+ 2.75+ 15.35+ 7.11+ 16.15+ 7.55+
784.32) 1 841.35 Length 3.50 2944.73 sqm
10624.29 sqm
C Say 10624.00 sqm
184 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system
186 Side and top hung glass paneling L/S 250.00 sqm
Level + 12 m
Grid M
67.18+ 60.78+ 241.47+ 45.35+ 31.0+ 26.0+
50.0+ 41.80+ 25.10) 1 588.68 Length 3.50 2060.38 sqm
Grid L
(8.15+ 2.75+ 15.35+ 7.11+ 16.15+ 7.55+
784.32) 1 841.35 Length 3.50 2944.73 sqm
10624.29 sqm
Say 10624.00 sqm
Arrival level
misc 100.00
4645.22 sqm
Say 4645.00 sqm
Apron lvl
FD1 4
FD2 6
FD3 7
Arrivals lvl
FD1 0
FD2 4
FD3 4
Departures lvl
FD1 4
FD2 6
FD3 7
Summary of Total no. of fire check doors
2118.00
B Say 2118.00 metre
Apron side
Second upper layer (upper side design)
1 1971 area - 1971.00 sqm
5 110 area - 550.00 sqm
2521.00 sqm
Add misc 2% 50.42 sqm
2571.42 sqm
B Say 2571.00 sqm
207 SS Skirting
From Apron to Arrival lvl
Column Integrated Protection Rail(C-1) 13 6.46 circumference 0.30 25.19
Cutout area
8 6.46 circumference 0.30 15.50
ROAD WORK
External development
Road Details
For VDC Mesurment only
i) Length of Elevated Road ( 10.5 mtr wide ) 1 815.00 10.50 8558.00 sqm
Length of Elevated Road with Extra Width
ii)
( Departure Lvl. ) ( 22.00 mtr Wide ) 1 575.00 22.00 12650.00 sqm
Total Elevated Road Length A 21208.00 sqm
Excavation
for Road works ( 300mm already excavated
for Preservation )
Surface road 46847.00 0.40 18738.80
Over Service block Road 3797.00 0.40 1518.80
50644.00 20257.60
say 20258.00 cum
Basement Level
Basement floor 1 16254.19 area 0.100 1625.42
Staircase lobbies 1 59.00 area 0.100 5.90
1 65.88 area 0.100 6.59
1 78.94 area 0.100 7.89
Lobby 1 1260.71 area 0.100 126.07
TBD 1 12.70 9.54 0.100 1.27
1 4.00 5.00 0.100 0.40
1 381.70 area 0.100 38.17
1 6.80 9.54 0.100 0.68
3 8.80 9.54 0.100 0.88
1 16.31 9.54 0.100 1.63
1 36.19 9.54 0.100 3.62
Over Elevated road 21208.00 0.100 2120.80
Surface road 46847.00 0.100 4684.70
Over Service Road 3797.00 0.100 379.70 cum
9003.72 cum
9004.00 cum
231 PCC 1: 2 : 4
Below Pavement /Walkway
Walkway 1 162.00 1.50 0.10 24.30
1 338.00 1.50 0.10 50.70
1 63.00 1.50 0.10 9.45
1 484.00 1.50 0.10 72.60
RHS Turning 1 278.00 1.50 0.10 41.70
1 471.00 1.50 0.10 70.65
towards exit 1 1026.00 1.50 0.10 153.90
opp. of Exit 1 336.00 1.50 0.10 50.40
around central islands 1 235.00 3.00 0.10 70.50
1 356.00 1.50 0.10 53.40
1 115.00 3.00 0.10 34.50
1 198.00 1.50 0.10 29.70
1 56.00 3.00 0.10 16.80
1 163.00 1.50 0.10 24.45
around Taxi Parking 1 480.00 1.50 0.10 72.00
area near metro staircase 0.5 area 1076.00 0.10 538.00
round about 1 220.00 1.50 0.10 33.00
Below Kerb stones
at Central Verge from starting of the new
road 1 600 0.30 0.10 18.00
around round about 1 220 0.30 0.10 6.60
around taxi parking 160 Cars 1 484.24 0.30 0.10 14.53
1 132.65 0.30 0.10 3.98
9 14.24 0.30 0.10 3.84
small islands between Taxi Parking 1 363.15 0.30 0.10 10.89
1 120.37 0.30 0.10 3.61
around canteen 1 125 0.30 0.10 3.75
around Metro taxi Parking 2 480 0.30 0.10 28.80
around Central Islands 2 591 0.30 0.10 35.46
2 313 0.30 0.10 18.78
2 219 0.30 0.10 13.14
RHS Turn 2 278 0.30 0.10 16.68
2 471 0.30 0.10 28.26
towards Exit 2 337 0.30 0.10 20.22
1 1026 0.30 0.10 30.78
Sq.m (TOTAL=
CLEARING GRASS AND REMOVAL OF GROUND
RUBBISH TOTAL COVER+
82079.00 LAWN)
Trenching in ordinary soil up to a depth of cm including removal and stacking of serviceable materials and then disposing of surplus soil , by
244 spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with
sludge or/ and manure before and after flooding trench with water (excluding cost of imported earth, slude or manure).
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm,
refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth
after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if
245 necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus
earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for
separately).
BED DEPTH
A. GROUND COVER AREA X BED DEPTH
4870.80 (0.3 M)
TOTAL FOR GROUND COVER WORK 4870.80 Cu.m
FOR SHRUB WORK [No. OF SHRUBS X r=h=0.45
B. metres, π=3.14
2/3 OF VOLUME( π x r x r x h )]
metres,
TOTAL FOR SHRUB WORK 3385.33 Cu.m
PREPARATION OF BEDS FOR HEDGING Cu.m Excavation
& SHRUBS 8256.13 volume
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 part
of stacked volume of earth after reduction by 20% :1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing
246 including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid
for separately)
Supplying and stacking of Good earth at site including royalty and carriage with all lead and lifts, (earth measured in stacks will be reduced by
248 20% for payment).
LAWN AREA + GROUND COVER AREA) X Cu.m DEPTH (0.4 M)
A.
DEPTH 32831.60
TOTAL FOR LAWN WORK 32831.60 Cu.m
Cu.m r=h=0.9
FOR TREE WORK [No. OF TREES X 2/3
B. metres,π=3.14
OF VOLUME( π x r x r x h )]
2946.78 metres,
TOTAL FOR TREE WORK 2946.78 Cu.m
Cu.m r=h=0.45
FOR SHRUB WORK [No. OF SHRUBS X
C. metres,π=3.14
2/3 OF VOLUME( π x r x r x h )]
3385.33 metres,
TOTAL FOR SHRUB WORK 3385.33 Cu.m
Supplying and stacking of cow dung manure/cattle manure at site including cost and carriage with all lead and lifts, (manure measured in
249 stacks will be reduced by 8% of payment)
MANURE
LAWN AREA X MANURE THICKNESS
A. 1646.08 Cu.m THICKNESS
(0.025 M)
(0.025 M)
TOTAL FOR LAWN MANURE 1646.08 Cu.m
MANURE
GROUND COVER AREA X MANURE
B. 811.80 Cu.m THICKNESS
THICKNESS (0.05 M)
(0.05 M)
TOTAL GROUND COVER MANURE 811.80 Cu.m
r=h=0.45
FOR SHRUB WORK [No. OF SHRUBS X
D. 1692.66 metres,π=3.14
1/3 OF VOLUME( π x r x r x h )]
metres,
TOTAL SHRUBS WORK MANURE 1692.66 Cu.m
@ 200 KG PER
A. FOR LAWN AREA ACRE, (4046.86
sq.m =1 acre)
@ 200 KG PER
B. FOR GROUND COVER AREA ACRE, (4046.86
sq.m =1 acre)
@ 0.25 KG
C. FOR TREES
PER TREE
(i) 0.25* No. OF TREES 482.75 Kg
TOTAL FOR TREES 482.75 Kg
@ 0.05 KG
D. FOR SHRUBS
PER SHRUB
(i) 0.05* No. OF SHRUBS 887.35 Kg
TOTAL FOR SHRUBS 887.35 Kg
TOTAL 5426.53 Kg
( 300LITRES
b) Chloropyriphos 20% EC 300.00 Ltrs.
LUMPSUM )
r=h=0.9
FOR TREE WORK [No. OF TREES X 2/3
B. 2946.78 Cu.m metres,π=3.14
OF VOLUME( π x r x r x h )]
metres,
TOTAL FOR TREE WORK 2946.78 Cu.m
r=h=0.45
FOR SHRUB WORK [No. OF SHRUBS X
C. 3385.33 Cu.m metres,π=3.14
2/3 OF VOLUME( π x r x r x h )]
metres,
TOTAL FOR SHRUB WORK 3385.33 Cu.m
r=h=0.9
FOR TREE WORK [No. OF TREES X 2/3
B. 2946.78 Cu.m metres,π=3.14
OF VOLUME( π x r x r x h )]
metres,
TOTAL FOR TREE WORK 2946.78 Cu.m
r=h=0.45
FOR SHRUB WORK [No. OF SHRUBS X
C. 3385.33 Cu.m metres,π=3.14
2/3 OF VOLUME( π x r x r x h )]
metres,
TOTAL FOR SHRUB WORK 3385.33 Cu.m
SURFACE
a) TOTAL LAWN AREA 65843.00 65843.00 Sq.m
AREA AS/DWG
TOTAL 65843.00 Sq.m
Removal of garden rubbish including
building rubbish, earth with or / and mulba
259
excavated by mechanial transport with all
lead and lift.
( 300 TRIP
A. ( TRIP LUMPSUM ) 300.00 per trip
LUMPSUM )
TOTAL 300.00 per trip
SURFACE
A. TOTAL LAWN AREA 65843.00 65843.00 Sq.m
AREA AS/DWG
TOTAL 65843.00 Sq.m
Preparation of mounds of various size and
shape by available excavated /supplied earth
in layers not exceeding 20 cm in depth,
261 breaking clods,watering of each layer, 4378.80 cum
dressing etc., lead upto 50 meter and lift upto
1.5 m complete as per direction of Officer-in-
charge.
ORNAMENTAL PLANT
Areca palm ht of plants 90-120 cm with 60-
292 70 leaves in in big size polybag well 777.00 777.00 Each
developed.
Shrubs plant
Buddha belly golden(B bel) ht of plants 150-
302 180 cm in polybag size of 20 cm well 200.00 200.00 Each
developed.
Cassia biflora of height 80-90 cm in big size
303 577.00 577.00 Each
polybag well developed.
Calliandra haematocephala of height 80-90
304 628.00 628.00 Each
cm in big size polybag well developed.
Caesalpinia pulcherrima ht of plants 90-120
305 560.00 560.00 Each
cm in big size polybag well developed.
Ficus benjamina ht of plants 120-150 cm in
306 38.00 38.00 Each
big size polybag well developed.
Ensete maurelii ht of plants 90-120 cm in big
307 310.00 310.00 Each
size polybag well developed.
Golden bamboo of height 120-150 cm in
308 250.00 250.00 Each
polybag of size 35 cm.well developed.
Hamelia dwarf bushy ht of plants 35-45 cm
309 2291.00 2291.00 Each
in big size polybag well developed.
Hibiscus pink tips ht of plants 50-60 cm in big
310 250.00 250.00 Each
size polybag well developed.
Hibiscus lafrance ht of plants 50-60 cm in big
311 250.00 250.00 Each
size polybag well developed.
Hibiscus snowflake ht of plants 50-60 cm in
312 2555.00 2555.00 Each
big size polybag well developed.
Ixora ht of plants 90-100 cm in big size
313 802.00 802.00 Each
polybag well developed.
Lagerstroemia Indica ht of plants 90-100 cm
314 618.00 618.00 Each
in big size polybag well developed.
Bamboo multiplex ht of plants120-150 cm in
315 250.00 250.00 Each
polybag size of 20 cm well developed.
Nerium oleander dwarf ht of plants 90-100
316 201.00 201.00 Each
cm in big size polybag well developed.
Plumbago Capensis of height 30-45 cm
317 300.00 300.00 Each
ingunnybag well developed.
Tecoma capensis of height 30-45 cm
318 2230.00 2230.00 Each
ingunnybag well developed.
Tecoma gaudichaudi ht of plants 80-90 cm in
319 583.00 583.00 Each
big size gunnybag well developed.
Tabernaemontana coronaria dwarf ht of
320 plants 50-60 cm bushy in big size gunnybag 952.00 952.00 Each
well developed.
Yucca sylvestrix well branched (bushy) of
321 height 50-60 cm in poly bag of 30 cm size 50.00 50.00 Each
gunnybag well developed.
Yucca elephantipes well branched (bushy)
322 of height 90-120 cm in poly bag of 30 cm 50.00 50.00 Each
size gunnybag well developed.
(M/o
Period for 12 months)
@ 160 KG PER
A. FOR LAWN AREA ACRE, (4046.86
sq.m =1 acre)
@ 160 KG PER
B. FOR GROUND COVER AREA ACRE, (4046.86
sq.m =1 acre)
@ 0.25 KG
C. FOR TREES
PER TREE
(i) 0.25*No. OF TREES 482.75 Kg
TOTAL FOR TREES 482.75 Kg
@ 0.05 KG
D. FOR SHRUBS
PER SHRUB
(i) 0.05*No. OF SHRUBS 887.35 Kg
TOTAL FOR SHRUBS 887.35 Kg
TOTAL 4615.24 Kg
@ 0.25 KG
C. FOR TREES
PER TREE
(i) 0.25*No. OF TREES 482.75 Kg
TOTAL FOR TREES 482.75 Kg
@ 0.05 KG
D. FOR SHRUBS
PER SHRUB
(i) 0.05*No. OF SHRUBS 887.35 Kg
TOTAL FOR SHRUBS 887.35 Kg
TOTAL 5426.53 Kg
@ 0.25 KG
C. FOR TREES
PER TREE
(i) 0.25*No. OF TREES 482.75 Kg
TOTAL FOR TREES 482.75 Kg
@ 0.05 KG
D. FOR SHRUBS
PER SHRUB
(i) 0.05*No. OF SHRUBS 887.35 Kg
TOTAL FOR SHRUBS 887.35 Kg
TOTAL 5426.53 Kg
(300 LITRES
360 CHLOROPYRIPHOS
LUMPSUM )
TOTAL 300.00 Ltrs
Grid -6
Toilet ( M) 1 3.75 0.90 3.38 3
Toilet ( F) 1 3.75 0.90 3.38 3
Grid -7
Staff toilet
Toilet ( M) 1 8.90 0.90 8.01 5
Toilet ( F) 1 8.80 0.90 7.92 5
Public toilet
Toilet ( M) 1 4.70 0.90 4.23 4
Toilet ( F) 1 4.70 0.90 4.23 4
Grid -20
Public toilet
Toilet ( M) 1 4.16 0.90 3.74 4
Toilet ( F) 1 3.85 0.90 3.47 4
Grid -24
Public toilet
Toilet ( M) 1 4.70 0.90 4.23 4
Toilet ( F) 1 4.70 0.90 4.23 4
Grid -28
Public toilet
Toilet ( M) 1 4.70 0.90 4.23 4
Toilet ( F) 1 4.70 0.90 4.23 4
Grid -35
Public toilet
Toilet ( F) 1 6.96 0.90 6.26 6
Toilet ( F) 1 6.96 0.90 6.26 6
Toilet ( M) 1 5.10 0.90 4.59 5
Toilet ( M) 1 5.10 0.90 4.59 5
Grid -41
Public toilet
Toilet ( M) 1 4.10 0.90 3.69 4
Toilet ( F) 1 4.10 0.90 3.69 4
Grid -45
Public toilet
Toilet ( M) 1 4.45 0.90 4.01 4
Toilet ( F) 1 4.45 0.90 4.01 4
Extra over above item , for providing oval shaped wash basin of size 550 x 430 x200 mm in vanity counter, made of moulded surface of 12 mm thick Acrylic
602
solid of same specification as above, and in approved colour and design, all complete as per drawings, specification and direction of Engineer in charge
Grid -6
Toilet ( M) 1 3 3
Toilet ( F) 1 3 3
Grid -7
Staff toilet
Toilet ( M) 1 5 5
Toilet ( F) 1 5 5
Public toilet
Toilet ( M) 1 4 4
Toilet ( F) 1 4 4
Grid -20
Public toilet
Toilet ( M) 1 4 4
Toilet ( F) 1 4 4
Grid -24
Public toilet
Toilet ( M) 1 4 4
Toilet ( F) 1 4 4
Grid -28
Public toilet
Toilet ( M) 1 4 4
Toilet ( F) 1 4 4
Grid -35
Public toilet
Toilet ( F) 1 6 6
Toilet ( F) 1 6 6
Toilet ( M) 1 5 5
Toilet ( M) 1 5 5
Grid -41
Public toilet
Toilet ( M) 1 4 4
Toilet ( F) 1 4 4
Grid -45
Public toilet
Toilet ( M) 1 4 4
Toilet ( F) 1 4 4
606 SS Bollards
From Apron to Arrival lvl
Bollards (100mm dia) 74 74.00
Departure lvl
Bollards (100mm dia) 66 66.00
140.00
Add 5% misc 7.00
147.00
Say 147.00 NOS
Area Details
Basement Area 1 1763.74 1763.74
Ground Floor Area 1 3300.50 3300.50
Terrace Area 1 3228.86 3228.86
8293.10 sqm
1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width
as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by
Engineer-in-charge.
Excavation
For service yard raft 1 1696.00 Area 2.28 3858.40
Footing F1 9 3.70 3.70 1.58 194.06
Footing F2 16 1.40 1.40 1.58 49.39
Footing F3 2 4.75 3.70 1.58 55.36
Oil tank (qty as per calculation below) 1 13.76 9.90 3.08 457.24
Pump room and water tank (qty as per calculation below) 1 1966.14 Area 6.28 13063.16
Service tunnel (qty as per calculation below) 1 49.30 7.2 4.70 1878.03
Plinth beam
Beam 400mm x 600mm 1 7.40 0.55 0.18 6.66
Beam 400mm x 750mm 1 3.35 0.55 0.33 4.02
Beam 400mm x 600mm 1 14.80 0.55 0.18 13.32
Letter grids (400mm x 750mm) 1 94.00 0.55 0.33 112.80
Letter grids (400mm x 1000mm) 1 52.40 0.55 0.58 89.08
Letter grids (400mm x 600mm) 1 11.80 0.55 0.18 10.62
Number grids (400mm x 750mm) 1 442.25 0.55 0.33 530.70
20322.84 Cu.m
5% contingency added 21338.99 Cu.m
Rounded 21339.00 Cu.m
Slope considered in excavation of oil tank, pump room, water tank and
service tunnel
H:V=1:6 V H
6.00 1.00
Oil tank
Bottom area 1.00 13.76 9.90 136.22 Area
Depth 3.08
Top length and width 14.79 10.93
Top area 1.00 14.79 10.93 161.53 Area
Excavation 457.24 Cu.m
Service tunnel
Bottom area 1.00 49.30 7.20 354.96 Area
Depth 4.70
Top length and width 50.87 8.77
Top area 1.00 50.87 8.77 445.93 Area
Excavation 1878.03 Cu.m
Pump room and water tank
Bottom area 1.00 50.60 31.80 1609.08 Area
1.00 38.70 9.60 371.52 Area
Total 1980.60 Area
Depth 6.28
Top length and width 51.65 33.89
40.79 10.65
Top area 1.00 51.65 33.89 1750.36 Area
40.79 10.65 434.26 Area
Total 2184.62 Area
Excavation 13063.16 Cu.m
a All kinds of soil (up to 1.5m)
For Raft 1 1696.00 Area 1.50 2544.00
Footing F1 9 3.70 3.70 1.50 184.82
Footing F2 16 1.40 1.40 1.50 47.04
Footing F3 2 4.75 3.70 1.50 52.73
Oil tank 1.50 223.04
5 Supplying and filling in plinth with sand under floors, including watering,
ramming, consolidating and dressing complete.
Excavation in service yard 3858.40
Excavation in footings 298.81
Deduct for concrete (raft+pcc) -965.02
Deduct for trench -1 745.000 Area 2.20 -1639.00
Filling in service yard 1553.19
Filling in footing 152.47
Total filling 1705.66
Filling with available excavated earth 1,193.96
Filling with sand 511.70
5% contingency added 538.28 Cu.m
538.00 Cu.m
Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
8 Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure
to a depth of 300 mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 1%
concentration
16 1:3:6 PCC
HSD Tank Area 1 3.50 21.01 0.10 7.35
misc 5.00
12.35
Say 12.00 cum
19 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including
service yard 2 332.00 0.90 597.60 sqm
597.60 sqm
Say 598.00 sqm
20 Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks,
cover, plain window sills, shelves, louvers, steps, stair cases, etc. including hoisting and setting in position with cement mortar 1:3 (1
Precast slab 50mm thick Below granite stone Copping 1 250.00 0.050 12.5
Misc 10.00
22.5
Say 23.00 cum
22 Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved
design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated
mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to
site of laying , excluding the cost of centering, shuttering and reinforcement, including cost of admixtures in recommended proportions as per IS :
9103/ manufacturer's specifications/ approved design mix to accelerate/ retard setting of concrete, improve workability without impairing strength
and durability as per direction of the Engineer-in-charge..
(Note: Cement content considered in this item is 330 Kg/cum. Excess/less cement used as per design mix is payable /recoverable separately)
All works upto plinth level.
Roof beam
Letter grids (400mm x 1000mm) 1 383.50 0.40 0.85 130.39
Letter grids (400mm x 750mm) 1 73.60 0.40 0.60 17.66
Letter grids (400mm x 600mm) 1 9.55 0.40 0.45 1.72
Number grids (400mm x 750mm) 1 505.35 0.60 0.30 90.96
Number grids (400mm x 1000mm) 1 557.45 0.40 0.85 189.53
Number grids (400mm x 600mm) 1 75.23 0.40 0.45 13.54
Stagging & Mumty lvl beam
Letter grids (400mm x 1000mm) 1 186.40 0.40 1.00 74.56
Letter grids (300mm x 600mm) 1 98.00 0.30 0.60 17.64
Letter grids (400mm x 750mm) 1 9.40 0.40 0.75 2.82
Slab
Ground floor
Service yard slab -S2 1 2090.40 Area 0.20 418.08
DG area slab 1 34.00 7.4 0.45 113.22
Pump room roof slab - S1 1 959.00 Area 0.20 191.80
WT roof slab - S1 1 58.90 15.4 0.20 181.41
Service tunnel roof slab-S3 1 47.80 3.8 0.25 45.41
Roof slab
Roof slab - S1 1 3746.40 Area 0.15 561.96
Less for opening -1 485.10 Area 0.15 -72.77
Less for staircase -1 5.90 4.70 0.15 -4.16
Mumty slab
Mumty slab - S1 1 7.10 5.90 0.15 6.28
Staircase
Pump room to ground floor
Slab 1 4.70 2.00 0.15 1.41
Mid landing 2 1.60 1.50 0.15 0.72
Waist slab 2 4.43 1.50 0.15 1.99
1 2.76 1.50 0.15 0.62
Treads 34 1.50 0.30 0.15 1.15
Ground floor to roof
Slab 1 4.70 2.00 0.15 1.41
Mid landing 2 1.60 1.50 0.15 0.72
Waist slab 2 4.77 1.50 0.15 2.15
1 3.09 1.50 0.15 0.70
Treads 39 1.50 0.30 0.15 1.32
Roof to Stagging lvl
Slab 1 4.70 2.00 0.15 1.41
Mid landing 2 1.60 1.50 0.15 0.72
Waist slab 2 1.75 1.50 0.15 0.79
1 1.42 1.50 0.15 0.32
Treads 14 1.50 0.30 0.15 0.47
2623.10 Cu.m
5% contingency added 2754.25 Cu.m
Rounded 2755.00 Cu.m
24 Extra for providing richer mixes at all floor levels. Excess/less cement over the specified cement content used is payable /recoverable
separately.
a Providing M-30 grade concrete instead of M-25 grade BMC/ RMC. (Note:-
Cement content considered in M 30 is @ 340 kg/ cum) 7439.00 Cu.m
28
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels.
a Above Plinth Level
Thermo-Mechanically Treated bars of grade Fe-500D or more.
Roof beam 443.81 210 93199.64
Staging & parapet beam 294.04 210 61748.40
Column above plinth 245.41 300 73623.60
Stub column 10.26 200 2052.00
Grade slab 949.92 80 75993.76
Roof slab 491.32 100 49131.84
Staircase waist slab 15.89 130 2065.64
Above Plinth Level
357814.87
5% contingency added 375705.62 MT
Rounded 376000.00 MT
Raft
Service yard raft 1 245.00 Perimeter 0.50 122.50
Oil tank raft 1 13.56 9.70 0.50 23.26
Pump room raft 1 168.70 Perimeter 0.50 84.35
Water tank raft 1 60.20 16.1 0.50 76.30
Service tunnel raft 1 115.30 Perimeter 0.50 57.65
Footing
Footing F1 9 3.50 3.50 0.80 100.80
Footing F2 16 1.20 1.20 0.80 61.44
Footing F3 2 4.55 3.50 0.80 25.76
Wall
Oil tank (long wall) 4 8.70 0.35 3.50 506.80
Oil tank (short wall) 4 3.75 0.35 3.50 229.60
Pump room wall 1 143.39 0.38 6.10 3507.87
Sump wall 1 6.40 0.50 1.30 35.88
1 2.80 0.38 1.30 16.51
Water tank wall 1 229.00 0.38 5.30 4862.75
Service tunnel wall 1 23.60 0.38 3.75 359.63
1 51.44 0.38 3.75 777.23
Raft fold wall in service tunnel 1 23.55 0.88 82.43
Baffle wall 4 3.70 4.80 284.16
Cable trench wall 1 510.00 2.20 4488.00
Roof slab
Roof slab - S1 1 3746.40 Area 3746.40
Less for non-slab area -1 485.10 Area -485.10
Less for staircase -1 5.90 4.70 -27.73
Mumty slab
Mumty slab - S1 1 7.10 5.90 41.89
Staircase
Pump room to ground floor
Slab 1 4.70 2.00 9.40
Mid landing 2 1.50 3.00
Waist slab 2 4.43 1.50 13.29
1 2.76 1.50 4.14
Treads 34 1.50 0.15 3.83
Ground floor to roof
Slab 1 4.70 2.00 9.40
Mid landing 2 1.60 1.50 4.80
Waist slab 2 4.77 1.50 14.31
1 3.09 1.50 4.64
Treads 39 1.50 0.15 4.39
Roof to Stagging lvl
Slab 1 4.70 4.70
Mid landing 2 1.60 1.50 4.80
Waist slab 2 1.75 1.50 5.25
1 1.42 1.50 2.13
Treads 14 1.50 0.15 1.58
89.64 sqm
Extra for additional height in centering, shuttering where ever required with
adequate bracing, propping etc., including cost of de-shuttering and
41
decentering at all levels, over a height of 3.5 m, for every additional height of
1 metre or part thereof (Plan area to be measured).
25931.155 sqm
5% contingency added 27227.71 sqm
Rounded 27228 sqm
Brick Work
57 230mm thick Red Brick Work below plinth L.S. 5.00 cum
58 230mm thick Red Brick Work in superstructure
Ground floor (7.0 - 0.6 - 0.6)
Horizontal Grid 1 (toilet wall) 1 4.90 0.23 5.80 6.54
less V1 -1 0.80 0.23 0.90 -0.17
Grid 2 1 1.99 0.23 5.80 2.65
1 1.32 0.23 5.80 1.76
less D1 -1 0.90 0.23 2.10 -0.43
Vertical Grid E 1 4.70 0.23 5.80 6.27
Between Grid E & D 1 4.70 0.23 5.80 6.27
misc 10.00
32.89
Say 33.00 cum
60 115mm thick Red Brick Work below plinth L.S. 50.00 sqm
WOOD WORKS
64 Wooden Door Frame
All floors
D1 3 15.30
D1' 3 14.40
D2 7 39.90
D3 1 6.00
D4 10 62.00
137.60 rmt
137.6 rmt x 0.150 x 0.065 1.34
Say 2.00 cum
65 Expandable fasteners
All floors No. / door
D1 3 8 24
D1' 3 8 24
D2 7 8 56
D3 1 8 8
D4 10 8 80
192 each
66 Flush Door
All floors
D1 3 0.90 2.10 5.67
D1' 3 0.60 2.10 3.78
D2 7 1.50 2.10 22.05
SS Tower Bolts
70 250 x 10mm
All floors No. / door
D1 3 1 3
D1' 3 1 3
D2 7 2 14
D3 1 2 2
D4 10 2 20
42 each
71 150 x 10mm
All floors No. / door
D1 3 1 3
D1' 3 1 3
D2 7 2 14
D3 1 2 2
D4 10 2 20
42 each
77 Wooden Beading
50x12mm
same qty as Wooden Door Frame Ref Item no. 64 137.60
137.60
Say 138.00 rmt
80 Lipping same qty as flush door (Ref Item no. 66) 77.00 sqm
84 150 x 10mm
All floors No / window
W1 20 4 80
W2 7 4 28
108 each
88 Friction Hinges
All floors each
W1 20 2 40
W2 7 2 14
54 each
90 Ball Bearing
Workshop Area No. / shutter
RS1 8 4 32
RS2 1 4 4
36
Say 36 each
92 Mechanical device
Workshop Area
RS1 8 3.50 3.00 84.00
RS2 1 4.50 3.00 13.50
97.50
Say 98.00 sqm
94
In gratings, Inserts, frames, guard bar, ladder, railings, brackets, gates and
similar works.
Staircases Railing 8 2.72 1.00 21.74
8 1.82 1.00 14.52
for misc. works 50.00
86.26 sqm
Considering unit wt. of railing @ 15kg/sqm A 1293.84 Kg
DG Exhaust
All sides 2 8.52 17.00 289.68
2 2.27 17.00 77.18
366.86 sqm
Considering unit wt. @ 20kg/sqm B 7337.20 Kg
101 Structural Steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a
priming coat of approved steel primer all complete
MS Frame structure to support DG exhaust pipes
Height of structure m 30.00
Height / Unit weight Total weight
Member Nos Total length
length (kg/m) (kg)
2ISA 75 x 75 x 6mm (vertical) 8 30.00 240.00 6.80 1632.00
ISA 75 x 75 x 6mm (frame) 2 4.15 8.30 6.80 56.44
ISA 75 x 75 x 6mm (frame) 2 3.60 7.20 6.80 48.96
Bracing angles
ISA 50 x 50 x 4mm (frame) @2m c/c 32 4.15 132.80 3.00 398.40
32 3.60 115.20 3.00 345.60
Diagonal bracings
ISA 50 x 50 x 4mm (frame) @2m c/c 30 4.61 138.20 3.00 414.61
30 4.12 123.55 3.00 370.64
3266.65
Flooring
103 62mm thick Hard Flooring
Basement lvl
Basement area 1 area 829.05 829.05
Ground floor
AC plant Room 1 20.20 52.70 1064.54
DG Set Room 1 area 586.24 586.24
11 KV Room 1 19.89 18.00 358.02
33 KV Room 1 15.16 11.80 178.89
33 KV RMU 1 15.17 7.60 115.29
1 area 298.47 298.47
misc 200.00
3630.50
Say 3631.00 sqm
ROOFING
133 Heat Resistant Tile
Terrace area 1 area 3228.86 3228.86
3228.86
Add 1% Extra for Skirting 32.00
3260.86
Say 3261.00 sqm
FINISHING WORKS
159 6mm thk. ceiling Plaster
Basement Ceiling 1 1763.74 area 1763.74
Ground Floor Ceiling 1 3300.5 area 3300.50
5064.24
Considering extra for beam @ 70% of total ceiling area 3544.97
8609.21
Say 8609.00 sqm
160 Considering 50% as 12mm thk. Internal Plaster Say 3784.00 sqm
161 Considering 50% as 15mm thk. Internal Plaster Say 3784.00 sqm
Aluminium Works
177 Aluminium Frames Fixed
for 6mm thk glass windows
W1 20 0.80 1.90 30.40
W2 7 1.20 1.90 15.96
Aluminium Louvers
LU1 1 3.50 1.90 6.65
53.01 sqm
Considering 60% for fixed portion 53.01 x 60% 31.81
TOTAL 31.81 @ 9.5 Kg/sqm 302.16
Say 302.00 Kg
Crystallisation waterproofing
214 Vertical Inner surface of Water Tanks
same qty as Ceramic tile wall tile 2901.00
2901.00
Say 2901.00 sqm
Module 1 cum
Module 3 cum
Module 1 cum
Module 3 cum
Banking excavated earth in layers not exceeding 20 cm in depth,
breaking clods,watering, rolling each layer with 1/2 tonne roller, or
wooden or steel rammers, and rolling every 3rd and topmost layer
with power roller of minimum 8 tonnes and dressing up, in
12 embankments for roads, flood banks,marginal banks, and guide cum
banks etc., lead upto 50 m and lift upto 1.5 m.
Module 1 Cum
Cum
RE wall base Cum
Below Approach slab Cum
Module 2 Cum
Module 3 Cum
RE wall base Cum
Below Approach slab Cum
Cum
Extra for providing richer mixes at all floor levels.
Note:- Excess/less cement over the specified cement content used is
payable /recoverable separately.
25 Providing M-35 grade concrete instead of M-25 grade BMC/RMC.
( Note ; Cement content considered in M-35 is @ 350 Kg/cum .
Steel reinforcement for R.C.C. work ready to use " cut and bend "
rebars of approved make from factory/ workshop to construction
site including placing in position and binding with binding wire all
27 complete .
Upto Plinth Level
Thermo-Mechanically Treated bars (Fe 500-D) or more
Module 1
Piles Kg
Pile caps Kg
Module 2
Piles Kg
pile caps Kg
Module 3
Piles Kg
pile caps Kg
Steel reinforcement for R.C.C. work ready to use " cut and bend "
rebars of approved make from factory/ workshop to construction
site including placing in position and binding with binding wire all
28 complete .
Above Plinth Level
Thermo-Mechanically Treated bars (Fe 500-D) or more
Module 1
Pier cap Kg
Piers Kg
Solid Slab Kg
Pedestals & crash barrier Kg
Module 2
Portal frame Kg
Piers Kg
Solid Slab Kg
Pedestals & crash barrier Kg
Module 3
Portal frame Kg
Piers Kg
Solid Slab Kg
Pedestals & crash barrier Kg
Girders Kg
RE wall Kg
Cu.m
sqm
sqm
Construction of granular sub-base by providing close graded
Material conforming to specifications, mixing in a mechanical mix
plant at OMC, carriage of mixed material by tippers to work site, for
all leads & lifts, spreading in uniform layers of specified thickness
with motor grader on prepared surface and compacting with
vibratory power roller to achieve the desired density, complete as
217 per specifications and directions of Engineer in-Charge.
With material conforming to Grade-I (size range 75 mm to 0.075 mm
) having CBR Value-30
cum
cum
cum
cum
sqm
Free float bearing-155 MT-Supplying, fitting/fixing in position true
to line and level POT-PTFE bearing make Sanfield, Mageeba, Metco or
approved consisting of a metal piston supported by a disc or
unreinforced elastomer confined within a metal cylinder, sealing
rings, dust seals, PTFE surface sliding against stainless steel mating
232 surface, completre assembly to be of cast steel/fabricated structural
steel, metal and elastomer elements to be as per IRC: 83 part-I & II
respectively and other parts conforming to BS: 5400, section 9.1 &
9.2 and clause 2006 of MoRTH Specifications complete as per
drawing and approved technical specifications.
Module 1
Type-1 Nos
Module 2
Type-1 Nos
Module 3
Type-1 Nos
Module 1 Sqm
Module 2 Sqm
Module 3 Sqm
Providing and laying bitumen mastic wearing course ( as per
specifications) with industrial bitumen of grade 85/25 confirming to
IS : 702, prepared by using mastic cooker and laid to required level
and slope, including providing antiskid surface with bitumen
precoated fine grained hard stone chippings of approved size at the
235 rate of 0.005 cum per 10 sqm and at approximate spacing of 10 cm
centre to centre in both directions, pressed into surface protruding 1
mm to 4 mm over mastic surface, including cleaning the surface,
removal of debries etc. all complete. ( Considering bitumen using
10.2% as per MORTH Specification)
25 mm thick
Module 1 Sqm
Module 2 Sqm
Module 3 Sqm
sqm
sqm
sqm
Sqm
Sqm
Sqm
sqm
Providing and laying bituminous macadam using crushed stone aggregates of
specified grading premixed with bituminous binder, transported to site by
tippers, laid over a previously prepared surface with paver finisher equipped
with electronic sensor to the required grade, level and alignment and rolling
with smooth wheeled vibratory and tandem rollers as per specifications to
achieve the desired compaction and density, complete as per specifications
and directions of Engineer-in-charge.
238 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ Cu.m
3.5% (percentage by weight of total mix) prepared in Batch type Hot Mix Plant
of 100 to 120 TPH capacity.
Providing and laying Dense Graded Bituminous Macadam using crushed stone
aggregates of specified grading, premixed with bituminous binder and filler,
transported the hot mix to work site by tippers, laying with paver finisher
equipped with electronic sensor to the required grade, level and alignment
and rolling with smooth wheeled , vibratory and tandem rollers as per
specifications to achieve the desired compaction and density, complete as per
specifications and directions of Engineer-in-charge.
50 to 100 mm average compacted thickness with bitumen of grade VG-30 @
239 5% (percentage by weight of total mix) and lime filler @2% ( percentage by Cu.m
weight of Aggregate)prepared in Batch type Hot Mix Plant of 100 to 120 TPH
capacity.
each
Providing, fixing, testing and commissioning of UPVC rain water
pipes (IS : 4985-1983, 6.00 Kg/cm2 pressure rating) including
injection moulded fittings (heavy duty) (plain or door) e.g. bends,
junction, cowls, tees, offsets, access pieces etc. Clamps/Supports
242 jointing with rubber ring/solvent cement joints including cutting m
chase or holes in walls and floors and making good as required at
Site. 110mm dia pipe
Boring, providing & installation bored cast in situ reinforced concrete piles of
grade M-25 of specified diameter and length below pile cap to carry a safe
working load not less than specified, excluding the cost of steel reinforcement
but including the cost of boring with bentonite solution and temporary casing
of appropriate length for setting out and removal of same and the length of
pile to be embedded in the pile cap etc by crawler mounted telescopic boom
hydraulic piling Rig all complete, including removal of excavated earth with all
it's lifts & leads. ( length of pile for payment shall be measured upto bottom of
622 pile cap) R.mt
Note : Truck mounted rotary/TMR/Tube well boring machine shall not be used.
1000 mm dia piles
Nos
Nos
Integrity testing of Pile using low strain/Sonic Integrity test/Sonic Echo Test
Method in accordance with IS-14893 including surface preparation of pile top
by removing soil, mud, dust & chipping lean concrete lumps etc and use of
Computerised equipment & high skill trained personnel for conducting the test
628 and submission of results, all complete as per direction of Engineer-in-charge. Nos
Providing and supplying Structural Cement concrete of grade M-35
for pre-cast girders ,crash barrier and RE wall panels complete
including cost of shuttering,manufacturing in precasting yard,
1349 storage, transportation, erection but excluding reinforcement as per
drawing and Technical Specifications of MoRTH Sections 1500,
1700, 2100,2200,2300.
Module 1
Pier cap Cum
Cum
Cum
Cum
Cum
Cum
Cum
piers Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Solid slab Cum
Approach Slab Cum
Module 2
Columns Cum
Cum
Module 3
Columns Cum
Cum
Cum
Module 1
Pedestals Cum
Cum
Cum
Cum
Cum
Cum
Cum
Module 2
Pedestals Cum
Cum
Cum
Cum
Cum
Module 3
Pedestals Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
RCC Crash barrier with M-40 concrete at the edges of roads
Module 1 Cum
Module 2 Cum
Module 3 Cum
Module 2
Portals Cum
Cum
Module 2- PSC girder Cum
Module 3
portals Cum
Cum
Cum
Module 1
Type-2 Nos
Module 2
Type-2 Nos
Module 3
Type-2 Nos
Module 1
Type-3 Nos
Module 2
Type-3 Nos
Module 3
Type-3 Nos
Pin fixed Bearing-100-325 MT-Supplying, fitting/fixing in position
true to line and level POT-PTFE bearing make Sanfield, Mageeba,
Metco or approved consisting of a metal piston supported by a disc
or unreinforced elastomer confined within a metal cylinder, sealing
rings, dust seals, PTFE surface sliding against stainless steel mating
surface, completre assembly to be of cast steel/fabricated structural
steel, metal and elastomer elements to be as per IRC: 83 part-I & II
1356 respectively and other parts conforming to BS: 5400, section 9.1 &
9.2 and clause 2006 of MoRTH Specifications complete as per
drawing and approved technical specifications.
Module 1
Type-4 Nos
Module 1
Type-5 Nos
Providing and fixing strip seal type expansion joint system with stud
type anchorge capable of accommodating movement up to 80mm
gap, complete as per approved drawings and standard MoRTH
1359 technical specifications section 2600 to be installed by the
manufacturer/supplier or their authorised representative ensuring
compliance to the manufacturer's instructions for installation.
Module 1 Mts
Module 2 Mts
Module 3 Mts
1 1
14 2804 39256.00
2500
108 108
448 448
48 48
Total type-1 604
1 42 42.00
1 639.93 11.50
7359
1 495.00 23.00 6900
1 292.00 11.50 3358
Total 17617
1 1
1 1
1 1
1 280 1 280.00
1 280 6 1680.00
1 1
52 22 1144
24 22 528
336 22 7392
36 22 792
Total 9856.00
448 2% 9
448 2% 9
448 2% 9
448 2% 9
1 1
1 812.65 812.65
1 2,559.21 2559.21
1 475.68 475.68
3847.54
TOTAL 10454.00
13 13
56 56
3 3
Total type-2 72
14 14
56 56
3 3
Total type-3 73
1 1
Total type-4 1
1 1
Total type-5 1
4 4
Total type-6 4
15 10.5 157.50
56 22.5 1260.00
3 11.5 34.50
Total 1452
1 4326.75
4326.75
Total 4327
Analysis of Rates ( Civil - Finishing Works)
6.00 Open timbering over areas including strutting, shoring etc. complete.
(Measurements to be taken of the face area timbered)..Depth upto 9.50 m
Labour
112 Carpenter 2nd class Day 0.25 448.00 112.00
114 Beldar Day 0.50 368.00 184.00
9999 sundries L.S 19.76 1.73 34.18
TOTAL 4331.74
Add 1% Water charges 43.32
TOTAL 4375.06
Add 15% Contractor profit & Over Heads 656.26
Cost for 90 sqm 5031.32
Cost per sqm total 55.90
say 56.00
MATERIAL
The Material can be used four times on the same work
and after use of material credit is given @ 75% of cost
Labour
112 Carpenter 2nd class Day 10.00 448.00 4480.00
114 Beldar Day 16.00 368.00 5888.00
9999 sundries L.S 373.60 1.73 646.33
TOTAL 15015.88
Add 1% Water charges 150.16
TOTAL 15166.04
Add 15% Contractor profit & Over Heads 2274.91
Cost for 90 sqm 17440.95
Cost per sqm total 193.79
say 193.80
47.00 Providing and fixing Expansion joint filler board of approved barand of Dawn colour between expansion joints, thickness built up u
10mm specifically extruded high performance sheet minimum density 28 kg per cum and compression strength 0.21 Kg./Sqm w
tested as per ASTM D-3575 including using double sided adhesive SIL tape (manufactured by Supreme Industries Ltd. or appro
equivalent) of 25x25x2 mm at four places per Sqm to the casted surface to form the expansion joint filler board will become one
of the shuttering while the expansion joint is being created, including cost of all materials, Transportation, cutting and placing to
required size, labour charges, sundries, wastage etc.at all levels complete as per drawings and as per direction of Enginee
Charge.
150mm thick
63 Providing and fixing 75 mm thick extruded polystyrene rigid insulation board of required size between cavity wall, complying w
ISO 4898:2008 & ASTM C 578-08b/15b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measure
per IS 346),compressive strength of > 350 kPa listed as per ASTM D 1621,density of 34-36 kg/cum as per ASTM D 1622, w
absorption <1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of
(max) as per ASTM D 3576. Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed w
suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge .
68.00 Providing and fixing in position single leaf fire check doors and frames at all levels of approved make ( navior, sukrti, iCLEAN
design, finish, tested and certified at CBRI, Roorkee or equivalent as approved. complete in all respect as per specifications
direction of Engineer-In-Charge and consisting of :-
a) Pressed male door frames manufactured from 1.6mm(16gauge) thick galvanised steel sheet confirming to IS 277(2003
double rebate profile of size minimum( 143mm X 57 mm) finished with 'H' -primer
b)minimum 46mm thick G.I. fire check door of 120 minutes fire rating conforming to BS:476 part 22 & IS : 364 part II fabrica
with 2 nos. 1.2mm thick(18 gauge) galvanised sheet with infill of fire rated properitory insulation filler bonded to both face
sheet with lock seam joints at style edges and internal reinforcement at top, bottom and style edges and internal reinforcemen
top bottom and style edges for fire rating .
c)The door frames and door shutters shall be primed with 'H' primer and finished with PU/Powder coated . The shutter would
mounted with SS Ball Bearing Hinges of size 100mm x 75mm x 3.0mm of Becker Fire Solutions ( 4Nos per leaf ),appropr
openings for vision panel glass. Prototype Test certificate for a test carried out earlier at CBRI Roorkee or as approved equiva
for fire rating of doors, shall be attached along with manufacturers test certificate.
d) All door shall be factory made including hardwares i.e. hinges, panic bar, door closer, lock, handles etc as desired with neces
reinforcement and direction of Engineer in charge.
e) Minimum 5 mm thick Pyron /pyrobeck / Central/Saint Gobain Fire Rated Clear Non Wired Glass of 120 minutes rating one
each leaf of size 300 x 300mm.
Single Leaf Door with vision with a guaranteed of 120 minutes fire rating (Please note :- The contractor should give the guaran
bond of fire rating).
Note:- Surface area of shutter including door frame in elevation (one side Only) shall be measured for payment..
Material
78 Steel door with frame including hardware & fixing
labour charge sqm 3.15 13866.67 43680.01
Add 18% GST 7862.40
Sub Total 51542.41
ADD 1% W.C 515.42
Sub Total 52057.84
ADD 15% C,P& O.H 7808.68
Cost for 3.15 Sqm 59866.51
Cost for 1.0 Sqm 19005.24
Say 19005.00
70 Providing and fixing stainless steel (grade 304) tower bolts of Yale 254 /Dline-Carl - F / Hafele/ DORMA make or appro
equivalent with necessary screws etc complete.
In stainless steel satin / polished finish
250 x10 mm
a) 250 x 10 mm
Data as per DAR Item No.9.63.1
Details of cost for 10 nos
Description Unit Quantity Basic Rate Cost
Materials:
51 SS Tower bolts Each 10.00 365.80 3658.00
0586 Screws 100 nos. 60.00 310.00 186.00
3844.00
Labour:
0123 Carpenter 1st class Day 0.10 710.00 71.00
Sub Total 3915.00
Add for water charges @1% 39.15
3954.15
Add contractors profit and overheads @ 15% 593.12
Cost of 10 tower bolts 4547.27
73 Providing and fixing bright finished 100 mm mortise latch and lock with six levers in stainless steel satin finish and a pai
stainless steel lever handles of make Hafele make (article no. 911.02.165, 916.96.006, 903.99.058) / Dorma (Pure 8100) /
make (article no. YTL-030+38P3+60MMDPSN-S) or approved equivalent make with necessary s.s. screws etc. complete as
direction of Engineer in charge.
74 Providing and fixing bright finished 100 mm mortise latch in stainless steel satin finish with one dead bolt and pair of stain
steel (grade 304) lever handles with necessary s.s. screws etc. complete Hafele make (article no. 911.02.165, 916.96.0
903.99.058) / Dorma (Pure 8100) /Yale make (article no. YTL-030+38P3+60MMDPSN-S) or approved equivalent make w
necessary s.s. screws etc. complete as per direction of Engineer in charge.
75 Providing and fixing Stainless Steel (grade 304) floor door stoppers in stainless steel satin finish (Twin) of Dorma(TZ-5000)/Ha
make (article no.937.13.53033/ Yale or equivalent) make with necessary ss screws etc. or approved equivalent make w
necessary s.s. screws etc. complete as per direction of Engineer in charge.
76 Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer (having brand logo with
3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1100 mm), with double sp
adjustment with necessary accessories and screws etc. complete. The manufacturer certificate for Life cycle of the door closer
to be 500000 cycle tested certificate has to be submitted by agency) . Dorma(TS-68)/Hafele make (article no.DCR 1824 FR/
-931.84.659 or equivalent)
78 Providing and fixing Toilet cubicles as under with door, pilaster and divider of 18mm thick board both side decorative comp
laminate of required colour ,shade and sizes as manufactured by Besco Merino or T Line or Greenlam Sturdo or equivalen
approved, including stainless steel accessories ( SS-304 grade) like square top rail. Front panel and divider wall with stripe s
touching floor (No gap shall be at bottom of divider/front panel except door), knob, thumb turn and indicator, twin coat ho
door stopper, adjustable shoe, gravity hinges, and locking arrangement, SS channel etc as desired. all complete as per drawi
The cubical unit shall be installed in approved finish, shades and colours as per specifications and direction of Engineer in cha
The cubical unit shall be minimum 10 years guarantee for the board against any moisture and 5 years guarantee for the hardwa
L-shape toilet cubicles of size 900mm (width) X 1500mm (depth) X 2100mm (height) with door ,External Laminate finish = Meta
96 Providing, Fabricating, Assembling, Painting, Hoisting and Erecting in position including detailing of Tubular Structure, Purl
rafters consisting of MS Steel tubular/hollow sections including , ISI marked from TATA/ SAIL / RINL/ Jindal/ Apollo/ Hi Tech or
approved make, conforming to IS 1161/4923, Grade YST 310 and Rolled section & plates conforming to IS 2062 (Grade YST 250
the profile shaped as per approved drawings with special plate connector, pinion joints, Plates, hollow sections etc. u
SAW/MAW/MIG welding process, including transportation, cutting, threading, machining, all leads and lifts up to all heights, t
and plants and necessary scaffolding etc. required for all operations involved.
The structural members shall be painted ( external surface only) with 320 DFT anti-corrosive protection coating using as appro
make with first coat of primer barrier Zep grey 60 microns thick, second coat with Penguard express MIO red 180 microns thick
final coat of polyurethane paint 80 microns thick (to be applied in two coats) with hard top XP white of which first coat shall b
ground and second coat after erection including touch-up of damaged area of already painted surfaces if any, upto all heig
including preparation of surface with grit/sand blasting upto Sa 2.5 grade (at least) of the structural steel member and thoro
cleaning of the surface before application of primer/paint.
The item shall be executed as per approved drawings and direction of the Engineer-in-Charge complete. (Note: The work shal
executed as per manufacturer's specifications wherever applicable, relevant code of practice and sound engineering practice).
(Please note that the quoted rate is inclusive of lifting as required by using cranes of adequate capicity and scaffolding or by
other means complete in all respects.)
124.38
say 124.40
97 Providing, Fabricating, Assembling, Hoisting and Erecting in position including detailing of Tubular Structure for façade/ ot
location as per drawing/ site requirement work of MS Steel tubular/hollow sections including , ISI marked from TATA/ SAIL / RI
Jindal/ Apollo / Hi-tech or as approved make, conforming to IS 1161/4923, Grade YST 310 and Rolled section & plates conform
to IS 2062 (Grade YST 250) in the profile shaped as per approved drawings with special plate connector, pinion joints, Pla
hollow sections etc. using SAW/MAW/MIG welding process, including transportation, cutting, threading, machining, all leads
lifts up to all heights, tools and plants and necessary scaffolding etc. required for all operations involved including applyin
priming coat of approved steel primer etc.as required .
The item shall be executed as per approved drawings and direction of the Engineer-in-Charge complete. (Note: The work shal
executed as per manufacturer's specifications wherever applicable, relevant code of practice and sound engineering practice).
(Please note that the quoted rate is inclusive of lifting as required by using cranes of adequate capacity and scaffolding or by
other means complete in all respects.)
113.34
Say 113.35
109 Providing and laying Digital Placement of Color / 100% Solution Dyed Nylon 6.6 carpet tiles ( anti static ) Tufted level Loop Pile
tiles shade and pattren as approved make & size 500 x 500 mm / 600 x 600 mm with protective stain treatment(s), soil
protection to repel and resist Stain and Anti Microbial treatment, Appearance Retention Rating (CRI 101) for severe use with PV
free backing having min. face eight of 10 gsm conforming to ASTME – 648 Flooring Radiant Panel Class I grade including fixing
with Volatile Organic Compound (VOC) Free Adhesive etc. complete as per drawing and directions of Engineer-In-Charge.
.
Extra for using 6mm thick stone adhessive(Ferrous) Sqm 1.00 209.00 209.00
Labour
123 Mason Ist class Day 0.12 710.00 85.20
115 Coolie Day 0.10 536.00 53.60
114 Beldar Day 0.10 536.00 53.60
139 Skilled Beldar (for floor rubbing etc.) Day 0.20 593.00 118.60
19 Machine for cutting (hand grinding) Day 0.20 250.00 50.00
9999 Sundries L.S 13.45 1.73 23.27
3033.98
Add water charge @ 1% 30.34
3064.32
Add 15 % CP & OH 459.65
Cost for Sqm 3523.96
SAY 3524.00
Sub- Analysis - 1
CEMENT MORTAR 1:4 ( 1 CEMENT :4 COARSE SAND)
DAR Item No.3.9
Details of cost for 1 cum
Materials
(0.214 cum of cement = 0.38 tonne)
367 Cement tonne 0.38 5700.00 2166.00
982 Coarse sand cum 1.07 3664.50 3921.02
Labour
For measuring, carrying, depositing and mixing
114 Beldar Day 0.75 536.00 402.00
101 Bhishsti Day 0.07 593.00 41.51
9999 Hire and running charges of mechanical mixer L. S 26.91 1.73 46.55
9999 Sundries L. S 13.52 1.73 23.39
Cost of 1 cum 6600.47
Cement for slurry over bed @ 4.40 Kg / sqm MT 0.005 5700.00 28.50
Extra for using 6mm thick stone adhessive(pidilite) Sqm 1.00 123.14 123.14
Extra for using polymer Roffy stone guard ( SB for Sqm 1.08 77.00 83.16
bottom & sides of granite stone) including application
charges
Labour
123 Mason Ist class Day 0.12 710.00 85.20
115 Coolie Day 0.10 536.00 53.60
114 Beldar Day 0.10 536.00 53.60
9999 Sundries L.S 13.45 1.73 23.27
3062.20
Add water charge @ 1% 30.62
3092.82
Add 15 % CP & OH 463.92
Cost for Sqm 3556.74
SAY 3556.70
123 Providing and fixing machine cut, mirror/ eggshell polished , granite stone work for wall lining (veneer work) , dado, skirting, ri
of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (avera
thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing w
white cement slurry admixed with pigment of matching shade, including groove ,rubbing, curing, polishing etc. all complete as
Architectural drawings, and as directed by the Engineer-in-Charge.
18mm thick Granite in all shade / colour / size (Area of slab over 0.50 sqm) as approved by Engineer in charge.
124 Providing and laying Polished Engineered marble stone flooring in required design and patterns, in linear as well as curvilinear
portions of the building, all complete as per the architectural drawings, laid over 15 mm (average) thick correction layer base of
cement mortar 1:4 (1 cement: 4 coarse sand) followed by laying and fixing with high polymer modified quick set adhesive of m
Ferrouscrete / Pidilite/ Ardex Endura / MAPEI / MYK Laticrete or equivalent with average 6mm thickness and jointed with cem
slurry and pointing with white cement slurry admixed with pigment of matching shade, including groove,rubbing, curing and
polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
18mm thick Engineered marble stone in all shade / colour / size (Area of slab over 0.50 sqm) as approved by Engineer in charge
Extra for using 6mm thick stone adhessive(Ferrous) Sqm 1.00 209.00 209.00
Labour
123 Mason Ist class Day 0.12 710.00 85.20
115 Coolie Day 0.10 536.00 53.60
114 Beldar Day 0.10 536.00 53.60
139 Skilled Beldar (for floor rubbing etc.) Day 0.20 593.00 118.60
19 Machine for cutting (hand grinding) Day 0.20 250.00 50.00
9999 Sundries L.S 13.45 1.73 23.27
3493.98
Add water charge @ 1% 34.94
3528.92
Add 15 % CP & OH 529.34
Cost for Sqm 4058.25
SAY 4058.30
Sub- Analysis - 1
CEMENT MORTAR 1:4 ( 1 CEMENT :4 COARSE SAND)
DAR Item No.3.9
Details of cost for 1 cum
Materials
(0.214 cum of cement = 0.38 tonne)
367 Cement tonne 0.38 5700.00 2166.00
982 Coarse sand cum 1.07 3664.50 3921.02
Labour
For measuring, carrying, depositing and mixing
114 Beldar Day 0.75 536.00 402.00
101 Bhishsti Day 0.07 593.00 41.51
9999 Hire and running charges of mechanical mixer L. S 26.91 1.73 46.55
9999 Sundries L. S 13.52 1.73 23.39
Cost of 1 cum 6600.47
125 Providing and fixing machine cut, mirror/ eggshell polished , Engineered marble stone work for wall lining (veneer work) includ
dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture
12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/s
including pointing with white cement slurry admixed with pigment of matching shade, including groove, rubbing, curing, polish
etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge.
18mm thick Engineered marble stone in all shade / colour / size (Area of slab over 0.50 sqm) as approved by Engineer in charge
Extra for using 6mm thick stone adhessive(Ferrous) Sqm 1.00 209.00 209.00
Labour
123 Mason Ist class Day 0.12 710.00 85.20
115 Coolie Day 0.10 536.00 53.60
114 Beldar Day 0.10 536.00 53.60
139 Skilled Beldar (for floor rubbing etc.) Day 0.20 593.00 118.60
19 Machine for cutting (hand grinding) Day 0.20 250.00 50.00
9999 Sundries L.S 13.45 1.73 23.27
3493.98
Add water charge @ 1% 34.94
3528.92
Add 15 % CP & OH 529.34
Cost for Sqm 4058.25
SAY 4058.30
Sub- Analysis - 1
CEMENT MORTAR 1:4 ( 1 CEMENT :4 COARSE SAND)
DAR Item No.3.9
Details of cost for 1 cum
Materials
(0.214 cum of cement = 0.38 tonne)
367 Cement tonne 0.38 5700.00 2166.00
982 Coarse sand cum 1.07 3664.50 3921.02
Labour 0.00
For measuring, carrying, depositing and mixing 0.00
114 Beldar Day 0.75 536.00 402.00
101 Bhishsti Day 0.07 593.00 41.51
9999 Hire and running charges of mechanical mixer L. S 26.91 1.73 46.55
9999 Sundries L. S 13.52 1.73 23.39
Cost of 1 cum 6600.47
127 Extra for Flamed/Sand blasted/ Leather finish finishing in place of polished marble/granite stone as per approved by
Engineer in charge., complete at all levels
cost for 1 sqm (as per market enquiry inclusive all taxes,
cartage etc )
Description Unit Quantity Rate Cost
Rates as per quotation Sqm 1 350.00 350.00
350.00
Add 1% Water Charges 3.50
135 Providing and laying aluminum dust buster matting (whipping & scrapping -moisture & dirt recessed ) for main entry as
manufacturer specifictions and direction of Engineer in charge.
Detail of cost of 1 sqm
Description Unit Quantity Rate Cost
76 Aluminium Entrance Matting sqm 1 1529.15 1529.15
Add 18% GST 275.25
Sub Total 1804.40
Add for water charges @ 1% 18.04
1822.44
Add for contractor's profit and overheads @ 15% 273.37
Cost for 1 Sqm 2095.81
Say 2096.00
137 Providing and fixing dry cladding at all heights with 30mm thick gang saw cut stone as approved fixed to RCC/ Masonry sur
with the help of stainless steel cramps of required shape and size, pins etc. and sealing the joints with approved weather sea
including grouting the frame work/cramps/pins, maintaining the grooves in stone slabs as per the drawing and filling the sa
with non-staining, non-streaking silicon joint sealants of approved make, including backer rod, drilling, anchoring, grouti
scaffolding, edge polishing, groove,chamfering to received tapered stone and providing and applying coating on external surfac
stone with solvent based silicone sealant of approved make as per manufacturer's specifications etc., all complete as
architectural drawings and direction of Engineer in charge. (Only exposed surface will be measured for payment. The stainless s
cramps and pins shall be paid for separately).
30mm thick Granite in all shade / colour / size (Area of slab over 0.50 sqm) as approved by Engineer in charge.
142 Extra over and above C & C router design pattren for Dry sand stone cladding refer drawing no LKO-INT-08 with all respec
desired as per manufacturer specifications and direction of Engineer in charge.( payment shall be paid of actual area of C
router design pattren.)
149 Providing and fixing Lloyd Superdeck /LYSAGHT Ezydek or approved equivalent profile 1.2mm thick TCT colour coated galvan
steel having minimum 240-245MPa yield strength as per IS 513 with a crest height of 44 to 51 at a pitch distance of 130 to 316
c/c having a cover width of 760 to 960mm. The galvanization shall be minimum 275 gm per sqcm as per IS 277 with co
coating of polyester quality paint of 20 microns over the primer coat of 5 microns on the exposed side and 5 microns alkyde c
over 5 microns primer coat on the inner side/ hot dipped zinc coating of 275 gm/sqcm on both sides confirming to AS 1397 and
EN 10147:2000 complete the job with all respect as desired and as per the direction of Engineer-incharge..
150 Providing and fixing roof cutout / sky light /canopy as per drawings with multicell Polycarbonate sheet as approved make of
minimum thickness 20 mm with 5 cells-6 wall structure having wall flange and supporting wall thickness as per manufacturer
specifications. Extruded translucent panels with vertical standing seam at both sides of panels with Snap-on connector to
interlock the panels with a double tooth grip-lock mechanism or aluminium system (with top plate and Bottom plate to be fixed
with a self tapping screw) and EPDM gaskets to ensure maximum uplift capability including End-cap/Aluminium U-Profile (mill
finish) for ends. Panels /sheets shall be co-extruded UV protected with anti-glare color/ coating on one side to prevent glare and
shall face sun/ top. The panels shall be fixed to pre installed structural M.S.frame work and be secured with snap-on connector
all levels including all accessories like screws, washers, flashing, trims etc complete to make a water tight cutout / sky light/cano
including transportation, lift, scaffolding, etc. conforming to specifications and directions of Engineer-in-Charge.
The Items includes supplying, Installation and fixing of multicell polycarbonate sheet over structural frame work, Labours,
Scaffolding, all required machineries for fixing, tools, weather sealants, aluminium channel, screws with pvc fillets, masking tap
protective tape, backer rods, bolts, gasket, etc. complete in all respect as desired asper approved drawing/ direction of Enginee
charge.( M.S. Structural steel frame work shall be paid seperately the respective item.)
The panels shall be fixed to pre installed structural M.S.frame / RCC work at all levels including all accessories like Fasten
Hangers, screws, washers, etc at site complete with all respect as desired . conforming to specifications and directions of Engin
in-Charge .Contractor shall give 10 years guarantee for entire system including Pure Polyester Powder Coating.
The Items includes supplying, Installation and fixing of U Baffle Aluminum panel ceiling over MS structural frame / RCC w
Labours, Scaffolding all required machineries for fixing tools, Fasteners, Hangers, screws, washers, etc complete in all respec
desired. ( M.S. structurer/ frame work shall be paid seprately under relevant item )
The panels shall be fixed to pre installed structural M.S.frame / RCC work at all levels including all accessories like Fasten
Hangers, screws, washers, etc at site complete with all respect as desired . conforming to specifications and directions of Engin
in-Charge .Contractor shall give 10 years guarantee for entire system including Pure Polyester Powder Coating.
The Items includes supplying, Installation and fixing of U Baffle Aluminum panel ceiling over MS structural frame / RCC w
Labours, Scaffolding all required machineries for fixing tools, Fasteners, Hangers, screws, washers, etc complete in all respec
desired. ( M.S. structurer shall be paid separately under relevant item )
176 Supplying and applying waterbased Fire intumescent paint fire tested in accordance with Certifier/BRE/BS 476 Parts 20-22
approved make @ DFT dependent on HP/a ratio of structural steel with zinc phosphate primer to give additional anti-corro
protection having VS of 73% - 83% as approved applied over abrasive blasted surface and surface preparation up to a standard
Sa2.5 (ISO 8501-1:1988) or SSPC-SP6 at 75 micron and GIRIHA/ LEEDV4 /Green Building norms Compliant for VOC Content
VOC Emissions polyurethane finish paint as approved having volume solid of 72% - 73% @ 50 micron of the required shade o
Structural Steel Works at all levels including storage, surface preparation by sand blasting, degreasing, cleaning, drying, provid
temporary staging, scaffolding, testing etc., all complete with all respect as desired and as per manufacturer specification
direction of Engineer in charge. The above products should confirm to GIRIHA/ LEEDV4 /Green Building norms. Application to
carried out by authorized manufacturer applicator or any other trained applicator as approved by the manufacturer and direc
of Engineer in charge.
For Two hrs fire rating
180 Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC/neoprene gasket, alumin
snap beading, aluminum channel etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cos
aluminum snap beading, channel shall be paid in basic item)
With toughened float glass panes of 12 mm thick
185 Designing,Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 36.50mm t
Laminated D.G.U. consisting of outer high performance 8mm thick heat strengthen (HS) + 16mm air gap + Inner 12.50 Lamina
( 6mm +1.52+5.0 both glass heat strengthen ( HS) insulated glass (double glazed) vision panel units of size and shape as requ
and specified, comprising of an outer 8mm thick heatstrengthen high performance glass , of approved colour and shade w
reflective soft / hard coating on surface # 2 , spacer tube 16mm wide, Inner 12.50 Laminated ( 6mm +1.52+5.0 both glass h
strenghten ( HS), dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for
required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by
Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.“(Payment for fixing of IGU Pa
in the curtain glazing is included in cost of relevant item )“For payment, only the actual area of glass on face # 1 of the glass pa
(including the areas of the grooves and weather silicone sealant)provided and fixed in position, shall be measured in sqm.“.
(i)Glass type A - 36.50mm thick Laminated D.G.U. consisting of outer high performance 8mm thick heat strengthen (H
toughened glass + 16mm air gap + Inner 12.50 Laminated ( 6mm +1.52+5.0 heat strenghten ( HS)/ toughened clear g
(properties shall visible Light transmittance (VLT) of minimum 39%, Light reflection internal 10 to 22%, light reflection externa
to 22 %, SHGC less than or equal to 0.24 and U value of less than 1.70 W/m2 degree K etc).
187 Providing and fixing 3.0m & 3.50m high aluminum frame partitions with 12.0mm thick toughened clear glass as per eleva
drawings / details enclosed with extruded built up sections of approved make confirming to alloy 63400 WP 6063 - T6 w
chemical composition and mechanical properties as per IS:733:1983 and IS 1285:2002. as per elevation / detail drawings enclo
All profiles shall be pure polyester Powder Coated to 50 - 60 microns in approved shade / colour according to IS:137871:1993 /
:1868, shall be fixed with rawl plugs and s.s. screws or with fixing clips or expansion hold fasteners including filling up all neces
gaps at junctions, at top, bottom and sides with required EPDM gasket (as per approved sample) i.e. EPDM gaskets shal
inserted between aluminum frames and beading for glass, as well as from inside and out side around the periphery of the glas
make the glazing air and water tight. Any openable aluminum frame door including handle, door closer, door lock, door stop
etc. shall be paid under the same item. However cost of supplying and fixing of any openable frameless glass door area shal
measured and paid separately as per actual. Aluminum Vertical & Horizontal section ( divder-both side glass frame) F2K1 – 120
x 110mm with minimum 2.3mm thickness at the back side, 2.3mm thickness in front and with 2.2mm thick side walls to be fixe
RCC beams / columns & steel beams / columns with hot dipped Galvanized M.S. brackets and stainless steel nuts bolts with PV
Teflon separator membranes between metal to metal joints at junctions. Aluminum Top, Bottom Vertical section F2K2- 120m
77.5mm ( outer frame ) with minimum 2.0mm thickness at the back side, 2.0mm thickness in front with minimum 2.0
thickness in side walls to be fixed to vertical section F2K1 with stainless steel screws (Grade- S.S. 304) and 3.5mm thick alumin
brackets in such a way that aluminum brackets shall not be seen in vision panels, forming grid systems of required size as
elevation drawings. The aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically with alumin
angle / corner brackets inside the frame wherever required including aluminum cleat angle, aluminum snap on beading for gla
with door seals / wool pile etc. all complete.The quoted rates shall be deemed to be inclusive of the cost of all aluminum,
galvanised brackets required for fixing partitions as per design / detail and labour mentioned above and any other incide
operation to complete the work. Items cost includes supplying, Installation and fixing of aluminum partition sections with 12
thick toughened clear glass, hardware, epdm gaskets, Labours, tools, including cost of sealants, brackets, anchor fasteners,
screws, masking tape, protective tape, backer rods, bolts and galvanised m.s. steel top brackets, scaffolding, All taxes and du
etc. complete in all respect as per approved drawings and direction of Enginer in charge.
Glass - 12mm thick toughened clear glass. All the installed glass panels shall be free from any scrach / defects.
G.I. Fastner for fixing in to floor - M8 x 125mm long 10.00 nos. 22.00 220.00
Bolt for fixing vertical section to the m.s. bracket l-M10
x 80 7.00 nos. 17.00 119.00
Galvanised M.S. Bracket for fixing vertical section @
6.5kg 39 kgs 85.0 3,315.00
PVC Shim - spacer / washer 18 nos. 2.0 36.00
Weather silicon at top bottom periphery- 10mm x 6mm 18 mtr 85.0 1,530.00
Backer rod - 15mm dia 18 mtr 16.0 288.00
Masking Tape - 18mm wide 18 mtr 1.2 21.60
Protection tape - 40microns 50mm wide 84.15
As/DAR mtr
Vol. IV, V-13.91.1, 1.8 *
P-178 151.47 4254 / P
DSR-97
CSK screws - 3.5 x 15mm 416 nos. 3.2 61
1,331.20
7,012.27
Add fabrication wasteage @5% 350.61
Total for Hardware & accessories 7,362.88
4 LABOUR
(Inlcuding loading , unloading, shifting to floors, fabricating, packing, removal of scrap from floors,
silicone sealing, bracket fixing, installation, cleaning etc all complete labour required for the item)
Description Qty Units Rates Total
Total of labour to complete the above work in all
respects: - 31.500 sqm. 938.00 29547.00
5 SCAFFOLDING
Scaffolding for installation, cleaning etc. 31.500 sqm. 150.00 4,725.00
TOTAL OF ITEMS 1, 2, 3, 4 & 5 ABOVE 148,513.22
Add Water charge @ 1% 1,485.13
Total 149,998.35
Add contractor's O.H. & profit @ 15% 22,499.75
GRAND TOTAL 172,498.10
COST OF 1 sq.m. Rs. - 5,476.13
SAY 5,476
189 Extra over and above C & C router design pattren for aluminum composite panel cladding refer drawing no-LKO-INT-06 with
respect as desired as per manufacturer specifications and direction of Engineer in charge.( payment shall be paid of actual are
C & C router design pattren.)
Detail of cost for 1.00 sqm as per quotations Unit Qty. Rate Amount
MR C & C Router cutting sqm 1.05 750.0 787.50
Add 18% GST 141.75
Sub Total 929.25
Add water charges @ 1% 9.29
Sub Total 938.54
Add Contractor Profit & OH @ 15% 140.78
Cost for 1.00 sqm 1079.32
Say 1079.00
191 Providing and fixing 12 mm thick toughened glass for SS Railling of approved brand and manufacture, including SS fittin
necessary SS fixtures , making necessary holes etc , all complete with all rspect as desired and direction of Engineer-in-charge .
Detail of cost for 1.00 no as per quotations Unit Qty. Rate Amount
192 Providing and fixing 3M™ Scotchal electro cut Dusted /Crystal ( acid -etched look ) 7725SE-314/324 Graphic Film over
designated locations shown in the drawing in any design, colour and pattern or as per the direction of the Engineer-In-Charge.
Detail of cost for 1.00 no as per quotations Unit Qty. Rate Amount
193 Supply, installation, testing & commissioning of aluminum scaffolding eassy to assemble and dismantlable quick fit type mob
quick access platform Aardwolf model no SER WN 234 make or as approved equivalent . The system shall be complete in
respect and direction of Engineer in-charge. System should include the following items.
Telescopic cleaning pole 6m long - 1 no..
195 Providing and fixing Assa Abloy YEH-01A /DORMA pull Handle TGDI-H 600back to back with 500mm CTC, adjustable fixing for gl
wood and metal doors in satin stainless steel grade 304. The pull handles should have supporting washer with raised bevelling
the outer surface. Length =600mm, 32mm dia, -SS304 etc .complete as per direction of Engineer-in-Charge.
201 Floor Mounted Trolley Fender : Fabrication, supply & installation of top mounted SS 304 grade floor mounted guard railin
Dorma/Ozone/ Rinox or Equivalent make 300 mm high as per drawing made of 38 x 1.5 mm thk. SS tube mounted with SS mod
laser cut vertical of 54 x 12 mm thk. mounted on SS base plate of dia. 95 x 6 mm thk. fixed with the help of M8 CSK head anch
as per vendor detail. Vertical are spaced @ 1.5 mtr. regular intervals. All SS components are in SS 304 grade with satin fin
made by using modern, automatic machines like CNC machine, laser cutting, water jets etc. The rate shall includes cos
conveyance of materials, base plate screws, bolts, fabrication, any locking arrangements, transportation,cutting & making good
floor/walls, loading & unloading, handling of machineries all electrical charges etc. labour charges , all leads and lift etc. comp
as directed by engineer incharge. (Please note that no welding of SS pipes will be allowed and work shall be done by a special
agency on modular and component basis).
202 Wall Mounted Trolley Fender : Fabrication, supply & installation of top mounted SS 304 grade wall mounted guard railin
Dorma/Ozone / Rinox / DLine or Equivalent make as per drawing made of 38 x 1.5 mm thk. SS tube mounted with SS mod
laser cut vertical of 54 x 12 mm thk. mounted on SS base plate of dia. 95 x 6 mm thk. fixed with the help of M8 CSK head anch
as per vendor detail. Vertical are spaced @ 1.5 mtr. regular intervals. All SS components are in SS 304 grade with satin fin
made by using modern, automatic machines like CNC machine, laser cutting, water jets etc. The rate shall includes cos
conveyance of materials, base plate screws, bolts, fabrication, any locking arrangements, transportation,cutting & making good
floor/walls, loading & unloading, handling of machineries all electrical charges etc. labour charges , all leads and lift etc. comp
as directed by engineer incharge. (Please note that no welding of SS pipes will be allowed and work shall be done by a special
agency on modular and component basis).
Detail of cost for 1.00 sqm as per quotations Unit Qty. Rate Amount
Type -1
MR 4mm thick aluminium facade including wastage 5.0%
sqm 1.05 7273.0 7636.65
Add 28% GST 2138.26
Labour fixing no 1.00 950.0 950.00
Add 18% GST 171.00
Sub Total 10724.91
Add water charges @ 1% 107.25
Detail of cost for 1.00 sqm as per quotations Unit Qty. Rate Amount
Type -2
MR 4mm thick aluminium facade including wastage 5.0%
sqm 1.05 7340.0 7707.00
Add 28% GST 2157.96
Labour fixing no 1.00 950.0 950.00
Add 18% GST 171.00
Sub Total 10814.96
Add water charges @ 1% 108.15
Sub Total 10923.11
Add Contractor Profit & OH @ 15% 1638.47
Cost for 1.00 sqm 12561.58
Say 12562.00
205 Perforated metal sheet FACADE ( Refer drawing no-LKO-ARC-DET-MF-01)
Fabricating, supplying and fixing in position 4mm thick aluminum single skin of flat aluminum alloy AA3005/3105 sheet pa
facade supported on MS structure / frame work (MS Supporting structure shall be paid separately under relevant item) in mod
of upto 3mtr X 3mtr with CNC router cutting of approved pattern & design as per drawing with pure polyester powder coa
minimum 50 microns thick of natural anodized finish or as approved shade / colour on visible face /all exposed surfaces includ
the edges. The panels shall be fixed with aluminum frame (150mmx60mm(nominal) 2mm thick) or as per approved shop drawi
The aluminum frame shall be fixed to the MS supporting structure with hot dipped galvanized MS brackets as per des
scaffolding all required machinery for fixing etc to complete the job as desired.
POWDER COATING SPECIFICATION: aluminum panel , cleaned through eco friendly cleaning ,process and powder applied t
electrostatic charged Automatic Carona technology spray guns and cured in combination of Infrared & hot air oven in a certi
plant. The powder is conforming with the performance requirements of the AAMA2603.02 & Qualicoat Claa 1 specifications.
coating thickness will be minimum 50 microns with properties of Salt Spray of 1500 hrs in exposure in SST Cabinet with Minim
blister rating 8 as per ASTM B-117,AAMA2603.02, 6.7.2,ASTM D1654 and Weather resistance of 12 Months Florida Exposure as
AAMA2603.02, 6.8. The above work shall be carried out as per specifications/ approved drawings in all respect and directio
Engineer In Charge.
Facade Type-3 .
Detail of cost for 1.00 sqm as per quotations Unit Qty. Rate Amount
Type -4
MR 4mm thick aluminium facade including wastage 5.0%
sqm 1.05 7612.0 7992.60
Add 28% GST 2237.93
Labour fixing no 1.00 950.0 950.00
Add 18% GST 171.00
Sub Total 11180.53
Add water charges @ 1% 111.81
Sub Total 11292.33
Add Contractor Profit & OH @ 15% 1693.85
Cost for 1.00 sqm 12986.18
Say 12986.00
207 Providing and fixing broom finish Stainless steel sheet ( 304 grade) Column / wall Cladding,skirting refer drawing made ou
1.2mm thick Stainless steel sheet of extruded sections, fixing with frame ,screws, rubber beading (for holding screws )
complete with all respect as desired as per drawing and manufacturers specifications and direction of Engineer in cha
( payment shall be paid of actual area of cladding.)
Detail of cost for 1.00 no as per quotations Unit Qty. Rate Amount
209 Providing ,supply & fixing 1.5mm thick self adhesive membrane with cross laminated HDPE, Bituthene CP Grace / Proofex
Fosroc/ Colphene-3000 on horizontal surface , Elongation ( ASTM D638 )- minimum 200%,Puncture resistance ( ASTM E1
minimum 200N, of approved make shall be fixed with leveling surface. The membrane should be designed to be applied
elevated temperatures of 55 deg C and should confirm to BS 8102:2009. Adjacent sheet shall be laid in similar manner w
overlaps as per system requirement. The overlap joint shall be cleaned and sealed as per manufacturer's specification, sea
corners, pile heads, and drains etc. or as desired side requirement and direction of Engineer in charge.
Note :-
(The all above operation excluding 25mm thcik CC 1:2:4 screed for protection layer before laying reinforement and concre
Contractor shall give 10 years guarantee for water proofings.The work shall be executed by authorized / manufacturer appro
applicator.
Note : Material to be supplied with original manufacturer's Data sheet, Lable, MTC and Method statement. The client has righ
inspect the manufacturing facility of the original manufacturer.
Detail of cost for 1.00 SQM as per quotations Unit Qty. Rate Amount
MR Injection Grouting sqm 1.00 450.0 450.00
Labour fixing sqm 1.00 100.0 100.00
550.00
Add 18% GST 99.00
Sub Total 649.00
Add water charges @ 1% 6.49
Sub Total 655.49
Add Contractor Profit & OH @ 15% 98.32
Cost for 1 Sqm 753.81
Say 754.00
223 Providing and laying in position polysulphide sealant of approved make conforming to BS-5212-1990 or IS 11433-1995,
expansion / Construction / dummy joints including rounding of edges applying 2 coats of approved primer compatible with
brand of polysulphide and preparing the surface and applying masking tape along the edge of joints to prevent accidental spil
of sealant on top surface and to give neat finish to the sealant and removing the masking tape after application of sealant
complete as per direction of Engineer-in-Charge & particular specifications. [note : for purpose of payment, quantity (Leng
Width X Depth) of sealant only will be measured.]
i) Expansion joints of size 25 mm wide and 10 mm deep over 30mm dia. Closed-cell Polyethylene foam back-up rod, as
manufacturers specifications and sketch at Appendix-'A'.
ii) Construction joints of size 10 mm wide and 10 mm deep over 12 mm dia Closed-cell Polyethylene foam back-up rod, as
manufacturers specifications and sketch at Appendix-'A'.
iii) Dummy joints of size 10 mm wide and 10 mm deep over 12 mm dia. Closed-cell Polyethylene foam back-up rod, as
manufacturer's specifications and sketch at Appendix-'A'.
Materials
Polysulphide primer (14sqm/lit) lit 1.61 420.00 676.20
Polysulphide lit 75 250.00 18750.00
Total 69925.75
Cost of 75000 cucm 69925.75
Cost of 1 cucm 0.932
Say 0.93
230 Providing and laying 70mm thick factory made cement concrete grass grid pavers block of M -30 grade made by block ma
machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and includ
50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Enginee
charge.
259 Removal of garden rubbish including building rubbish, earth with or / and mulba excavated by mechanial transport
with all lead and lift.
260 Supplying of selection no-1 in turf form at site of work lush green, free from weeds with good and healthy i/c loading
and un loading with all leads and lifts.
NOTE:- Providing and display of (New integrated passenger terminal building at C.C.S. International Airport,Lucknow)
262 following plant cadamba
Anthecophalus details as having
per given below
height . All supplied
of 10-12ft plants
stright & are
sturdy well developed
branches big poly and as per
bag well directed by officer in
developed.
263 Azadirachta indica having height of 10-12ft stright & sturdy branches big poly bag well developed.
Rate as per quotation
Detail of cost each plant
Description
264 Bombax Malabaricum having height of 10-12ft stright & sturdy branches big poly bag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Bombax Malabaricum each 1.00 780.00 780.00
265 Bauhinia Blackie having height of 10-12ft stright & sturdy branches big poly bag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Bauhinia Blackie each 1.00 1463.00 1463.00
Sub Total 1463.00
Handling Charges @ 2.5% 36.58
Cost for each plant 1499.58
Say 1500.00
266 Butea frondosa having height of 10-12ft stright & sturdy branches big poly bag well developed.
Rate as per quotation
Detail of cost each plant
Description
267 Chukrasia Tabularis having height of 10-12ft stright & sturdy branches big poly bag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Chukrasia Tabularis each 1.00 780.00 780.00
Sub Total 780.00
Handling Charges @ 2.5% 19.50
Cost for each plant 799.50
Say 800.00
268 Cassia Fistula having height of 10-12ft stright & sturdy branches big poly bag well developed.
Rate as per quotation
Detail of cost each plant
Description
269 Chorisia speciosa having height of 10-12ft stright & sturdy branches big poly bag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Chorisia speciosa each 1.00 585.00 585.00
Sub Total 585.00
Handling Charges @ 2.5% 14.63
Cost for each plant 599.63
Say 600.00
270 Callistemon lanceolatus having height of 10-12ft stright & sturdy branches big poly bag well developed.
Rate as per quotation
Detail of cost each plant
Description
271 Dalbergia Sissoo having height of 10-12ft stright & sturdy branches big poly bag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Dalbergia Sissoo each 1.00 780.00 780.00
Sub Total 780.00
Handling Charges @ 2.5% 19.50
Cost for each plant 799.50
Say 800.00
272 Delonix regia having height of 10-12ft stright & sturdy branches big poly bag well developed.
Rate as per quotation
Detail of cost each plant
Description
273 Erythrina Indica having height of 10-12ft stright & sturdy branches big poly bag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Bombax Malabaricum each 1.00 585.00 585.00
Sub Total 585.00
Handling Charges @ 2.5% 14.63
Cost for each plant 599.63
Say 600.00
274 Ficus Lyrata having height of 4-6 ft stright & sturdy branches big poly bag well developed.
Rate as per quotation
Detail of cost each plant
Description
275 Ficus virens having height of 10-12ft stright & sturdy branches big poly bag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Bombax Malabaricum each 1.00 976.00 976.00
Sub Total 976.00
Handling Charges @ 2.5% 24.40
Cost for each plant 1000.40
Say 1000.00
276 Ficus infectoria having height of 10-12ft stright & sturdy branches big poly bag well developed.
277 Jacaranda mimosaefolia having height of 10-12ft stright & sturdy branches big poly bag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Jacaranda mimosaefolia each 1.00 780.00 780.00
Sub Total 780.00
Handling Charges @ 2.5% 19.50
Cost for each plant 799.50
Say 800.00
278 Lagerstroemia speciosa having height of 10-12ft stright & sturdy branches big poly bag well developed.
279 Lagerstroemia Floribunda having height of 10-12ft stright & sturdy branches big poly bag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Lagerstroemia Floribunda each 1.00 732.00 732.00
Sub Total 732.00
Handling Charges @ 2.5% 18.30
Cost for each plant 750.30
Say 750.00
280 Mangifera Indica having height of 10-12ft stright & sturdy branches big poly bag well developed.
281 Plumeria alba multi branched in height 6-8ft in poly bag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Plumeria alba each 1.00 1463.00 1463.00
Sub Total 1463.00
Handling Charges @ 2.5% 36.58
Cost for each plant 1499.58
Say 1500.00
282 Plumeria Acutifolia multi branched in height 6-8 ft in poly bag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Plumeria Acutifolia each 1.00 1463.00 1463.00
Sub Total 1463.00
Handling Charges @ 2.5% 36.58
Cost for each plant 1499.58
Say 1500.00
283 Salvadora oleoides having height of 10-12ft stright & sturdy branches big poly bag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Salvadora oleoides each 1.00 732.00 732.00
Sub Total 732.00
Handling Charges @ 2.5% 18.30
Cost for each plant 750.30
Say 750.00
284 Foxtail (palm) having height of 7-8 ft trunk with 60-70 leves well developed in big container pot bond condition.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
285 Fishtail (palm) having height of 6-8 ft trunk with 60-70 leves well developed in big container pot bond condition.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Fishtail (palm) each 1.00 1951.00 1951.00
Sub Total 1951.00
Handling Charges @ 2.5% 48.78
Cost for each plant 1999.78
Say 2000.00
286 Kentia palm having height of 8-10ft trunk with 60-70 leves well developed in big container pot bond condition.
287 Phoenix sylvestrix (date palm) having height of 8-10ft trunk with 60-70 leves well developed in big container pot bond
condition.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Phoenix sylvestrix (date palm) each 1.00 11707.00 11707.00
Sub Total 11707.00
Handling Charges @ 2.5% 292.68
Cost for each plant 11999.68
Say 12000.00
288 Ptychosperma macarthurii having height of 8-10ft trunk with 60-70 leves well developed in big container pot bond
condition.
Rate as per quotation
289 Roystonea Regia having height of 8-10ft trunk with 60-70 leves well developed in big container pot bond condition.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Roystonea Regia each 1.00 7805.00 7805.00
Sub Total 7805.00
290 Washingtonia filifera (palm) having height of 6-8ft trunk with 60-70 leves well developed in big container pot bond
condition.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Washingtonia filifera (palm) each 1.00 9756.00 9756.00
Sub Total 9756.00
Handling Charges @ 2.5% 243.90
Cost for each plant 9999.90
Say 10000.00
291 Washingtonia Robusta (palm) having height of 6-8ft trunk with 60-70 leves well developed in big container pot bond
condition.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Washingtonia Robusta (palm) each 1.00 7805.00 7805.00
Sub Total 7805.00
Handling Charges @ 2.5% 195.13
Cost for each plant 8000.13
Say 8000.00
293 Chamaedorea elegans ht of plants 90-120 cm with 60-70 leaves in in big size polybag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Chamaedorea elegans each 1.00 878.00 878.00
Sub Total 878.00
Handling Charges @ 2.5% 21.95
Cost for each plant 899.95
Say 900.00
294 Cycas circinalis having trunk ht of 100-120 cm disease free fresh leaves in big size polybag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Cycas circinalis each 1.00 4390.00 4390.00
Sub Total 4390.00
Handling Charges @ 2.5% 109.75
Cost for each plant 4499.75
Say 4500.00
295 Casuarina topiary multi ball topiary well branched (bushy) of height 150-180 cm in big size polybag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Casuarina topiary multi ball topiary well branched
(bushy) each 1.00 1463.00 1463.00
Sub Total 1463.00
Handling Charges @ 2.5% 36.58
Cost for each plant 1499.58
Say 1500.00
296 Cycus revoluta having trunk ht of 45-60 cm with 75-90 disease free fresh leaves in big size polybag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Cycus revoluta each 1.00 4390.00 4390.00
Sub Total 4390.00
Handling Charges @ 2.5% 109.75
297 Ficus Microcarpa multi ball topiary well branched (bushy) of height 150-180 cm in big size polybag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Ficus Microcarpa multi ball topiary well branched
(bushy) each 1.00 1463.00 1463.00
Sub Total 1463.00
Handling Charges @ 2.5% 36.58
Cost for each plant 1499.58
Say 1500.00
298 Melaleuca topiary single ball topiary well branched (bushy) of height 150-180 cm in big size polybag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Melaleuca topiary single ball topiary well branched
(bushy) each 1.00 1463.00 1463.00
Sub Total 1463.00
Handling Charges @ 2.5% 36.58
Cost for each plant 1499.58
Say 1500.00
300 Phoenix roebelenii having trunk of 60-75 cm with 45 leaves in big size gunnybag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Phoenix roebelenii each 1.00 1951.00 1951.00
Sub Total 1951.00
Handling Charges @ 2.5% 48.78
Cost for each plant 1999.78
Say 2000.00
301 Raphis excelsa ht of plants 50-60 cm with 6-8 suckers in big size gunnybag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
302 Buddha belly golden(B bel) ht of plants 150-180 cm in polybag size of 20 cm well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Buddha belly golden(B bel) each 1.00 1171.00 1171.00
Sub Total 1171.00
Handling Charges @ 2.5% 29.28
Cost for each plant 1200.28
Say 1200.00
303 Cassia biflora of height 80-90 cm in big size polybag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Cassia biflora each 1.00 117.00 117.00
Sub Total 117.00
Handling Charges @ 2.5% 2.93
Cost for each plant 119.93
Say 120.00
304 Calliandra haematocephala of height 80-90 cm in big size polybag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Calliandra haematocephala each 1.00 68.00 68.00
Sub Total 68.00
Handling Charges @ 2.5% 1.70
Cost for each plant 69.70
Say 70.00
305 Caesalpinia pulcherrima ht of plants 90-120 cm in big size polybag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Caesalpinia pulcherrima each 1.00 146.00 146.00
Sub Total 146.00
Handling Charges @ 2.5% 3.65
Cost for each plant 149.65
Say 150.00
306 Ficus benjamina ht of plants 120-150 cm in big size polybag well developed.
Rate as per quotation
307 Ensete maurelii ht of plants 90-120 cm in big size polybag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Plumeria Acutifolia each 1.00 780.00 780.00
Sub Total 780.00
Handling Charges @ 2.5% 19.50
Cost for each plant 799.50
Say 800.00
309 Hamelia dwarf bushy ht of plants 35-45 cm in big size polybag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Hamelia dwarf bushy each 1.00 68.00 68.00
Sub Total 68.00
Handling Charges @ 2.5% 1.70
Cost for each plant 69.70
Say 70.00
310 Hibiscus pink tips ht of plants 50-60 cm in big size polybag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Hibiscus pink tips each 1.00 98.00 98.00
Sub Total 98.00
Handling Charges @ 2.5% 2.45
Cost for each plant 100.45
Say 100.00
312 Hibiscus snowflake ht of plants 50-60 cm in big size polybag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Hibiscus snowflake each 1.00 78.00 78.00
Sub Total 78.00
Handling Charges @ 2.5% 1.95
Cost for each plant 79.95
Say 80.00
314 Lagerstroemia Indica ht of plants 90-100 cm in big size polybag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Lagerstroemia Indica each 1.00 146.00 146.00
Sub Total 146.00
Handling Charges @ 2.5% 3.65
Cost for each plant 149.65
Say 149.65
316 Nerium oleander dwarf ht of plants 90-100 cm in big size polybag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Nerium oleander dwarf each 1.00 146.00 146.00
Sub Total 146.00
Handling Charges @ 2.5% 3.65
Cost for each plant 149.65
Say 150.00
319 Tecoma gaudichaudi ht of plants 80-90 cm in big size gunnybag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Tecoma gaudichaudi each 1.00 98.00 98.00
Sub Total 98.00
Handling Charges @ 2.5% 2.45
Cost for each plant 100.45
Say 100.00
320 Tabernaemontana coronaria dwarf ht of plants 50-60 cm bushy in big size gunnybag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Tabernaemontana coronaria dwarf each 1.00 117.00 117.00
Sub Total 117.00
321 Yucca sylvestrix well branched (bushy) of height 50-60 cm in poly bag of 30 cm size gunnybag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Yucca sylvestrix well branched (bushy) each 1.00 293.00 293.00
Sub Total 293.00
Handling Charges @ 2.5% 7.33
Cost for each plant 300.33
Say 300.00
322 Yucca elephantipes well branched (bushy) of height 90-120 cm in poly bag of 30 cm size gunnybag well developed.
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Yucca elephantipes well branched (bushy) each 1.00 293.00 293.00
Sub Total 293.00
Handling Charges @ 2.5% 7.33
Cost for each plant 300.33
Say 300.00
325 Dracaena pleomele reflexa ht of plants 30-45 cm in poly bag. (11 Nos./sqmt)
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
326 Dracaena variegated tricolour ht of plants 30-45 cm in poly bag . (11 Nos./sqmt)
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Dracaena variegated tricolour each 1.00 1463.00 1463.00
Sub Total 1463.00
Handling Charges @ 2.5% 36.58
Cost for each plant 1499.58
Say 1500.00
327 Ficus longisland well developed of height 30-40 cm in poly bag of size 20 cm. (11 Nos./sqmt)
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Ficus longisland each 1.00 1171.00 1171.00
Sub Total 1171.00
Handling Charges @ 2.5% 29.28
Cost for each plant 1200.28
Say 1200.00
328 Ficus reginald well developed of height 30-40 cm in poly bag of size 20 cm. (11 Nos./sqmt)
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Ficus reginald each 1.00 1171.00 1171.00
Sub Total 1171.00
Handling Charges @ 2.5% 29.28
Cost for each plant 1200.28
Say 1200.00
331 Iresine well developed of height 15-30 cm in poly bag of size 20 cm (24 Nos./sqmt
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Iresine each 1.00 780.00 780.00
Sub Total 780.00
Handling Charges @ 2.5% 19.50
Cost for each plant 799.50
Say 800.00
332 Clerodendron inerme well developed of height 15- 30 cm in big poly bag (24 Nos./sqmt)
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Clerodendron inerme each 1.00 585.00 585.00
Sub Total 585.00
Handling Charges @ 2.5% 14.63
Cost for each plant 599.63
Say 600.00
339 Red Fountain grass well develope of height 15-30 cm in polybag (11 Nos./sqmt)
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Red Fountain grass each 1.00 1171.00 1171.00
Sub Total 1171.00
Handling Charges @ 2.5% 29.28
Cost for each plant 1200.28
Say 1200.00
340 Tabernaemontana coronaria "variegata"well developed of height 45-60 cm in polybag (11 Nos./sqmt)
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Tabernaemontana coronaria "variegata" each 1.00 1171.00 1171.00
Sub Total 1171.00
Handling Charges @ 2.5% 29.28
Cost for each plant 1200.28
Say 1200.00
341 w hite Fountain grass well develope of height 15-30 cm in polybag (11 Nos./sqmt)
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
White Fountain grass each 1.00 1171.00 1171.00
Sub Total 1171.00
Handling Charges @ 2.5% 29.28
Cost for each plant 1200.28
Say 1200.00
343 Yellow Fountain grass well develope of height 15-30 cm in polybag (11 Nos./sqmt)
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Yellow Fountain grass each 1.00 976.00 976.00
Sub Total 976.00
Handling Charges @ 2.5% 24.40
Cost for each plant 1000.40
Say 1000.00
346 Supply and laying S.S.Dustbins with swing covers 2' high ,1'6" dia
(Basic
Rate asCost
perRs.15000/-)
quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
S.S.Dustbins each 1.00 12914.00 12914.00
12914.00
ADD 1% W.C 129.14
Sub Total 13043.14
ADD 15% C.P. & O.H. 1956.47
Cost for each plant Total 14999.61
Say 15000.00
347 Supply of decorative pots (Yucaabe) 30" high , 30" dia (Basic Cost Rs.5000/-)
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Decorative pots (Yucaabe) 30" high , 30" dia each 1.00 4305.00 4305.00
4305.00
ADD 1% W.C 43.05
Sub Total 4348.05
ADD 15% C.P. & O.H. 652.21
Cost for 1.00 Kg Total 5000.26
Say 5000.00
348 Supply of decorative pots (Yucaabe) 48" high , 20" dia (Basic Cost Rs.7500/-)
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Decorative pots (Yucaabe) 48" high , 20" dia each 1.00 6457.00 6457.00
6457.00
ADD 1% W.C 64.57
Sub Total 6521.57
ADD 15% C.P. & O.H. 978.24
Cost for each plant Total 7499.81
Say 7500.00
350 Providing and laying of Rocks of different sizes ( 20% of total qty in 2400 mm to 3000 mm in length in one side, 30% of
total qtyper
Rate as in quotation
1200 mm to 1500 mm and 50% of total qty in 600 mm to 1000 mm one side ) brought from outside and to
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Rocks each 1.00 2583.00 2583.00
2583.00
ADD 1% W.C 25.83
Sub Total 2608.83
ADD 15% C.P. & O.H. 391.32
Cost for each plant Total 3000.15
Say 3000.00
351 Plantation of Trees & shrubs plant at site i/c watering and removal of unsaverieable material's as per direction of
officer
Rate asinper
charge (excluding cost of plant & water)
quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
each 1.00 5.00 5.00
5.00
ADD 1% W.C 0.05
Sub Total 5.05
ADD 15% C.P. & O.H. 0.76
Cost for each plant Total 5.81
Say 6.00
352 Plantation of Ground Covers plant at site i/c watering and removal of unsaverieable material's as per direction of
officer
Rate asinper
charge (excluding cost of plant & water)
quotation
Detail of cost for 1.00 Sqm
Description Unit Quantity Rate Cost
Material
Ground covers each 1.00 50.00 50.00
50.00
ADD 1% W.C 0.50
Sub Total 50.50
ADD 15% C.P. & O.H. 7.58
Cost for 1.00 Sqm Total 58.08
Say 58.00
Maintenance Schedule
354 Complete maintenance of garden with entire garden features in the garden area i.c lawn, trees, shrubs, hedge etc and
removal of all
Rate as per weeds, watering mowing of lawn, pruning of trees/shrubs, clipping of hedge/edge top dressing of in
quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Maintenance of trees each 1.00 40.00 40.00
40.00
ADD 1% W.C 0.40
Sub Total 40.40
ADD 15% C.P. & O.H. 6.06
Cost for 1.00 Kg Total 46.46
Say 46.00
355 Complete maintenance of garden with entire garden features in the garden area i.c lawn, trees, shrubs, hedge etc and
removal of all
Rate as per weeds, watering mowing of lawn, pruning of trees/shrubs, clipping of hedge/edge top dressing of in
quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Ground covers each 1.00 10.00 10.00
10.00
ADD 1% W.C 0.10
Sub Total 10.10
ADD 15% C.P. & O.H. 1.52
Cost for 1.00 Kg Total 11.62
Say 12.00
356 Complete maintenance of garden with entire garden features in the garden area i.c lawn, trees, shrubs, hedge etc and
removal of all
Rate as per weeds, watering mowing of lawn, pruning of trees/shrubs, clipping of hedge/edge top dressing of in
quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Maintenance of Ground covers each 1.00 2.00 2.00
2.00
ADD 1% W.C 0.02
Sub Total 2.02
ADD 15% C.P. & O.H. 0.30
Cost for 1.00 Kg Total 2.32
Say 2.00
358 DAP
Rate as per quotation
Detail of cost each plant
Description Unit Quantity Rate Cost
Material
Supplying and spreading of DAP each 1.00 26.00 26.00
26.00
ADD 1% W.C 0.26
Sub Total 26.26
ADD 15% C.P. & O.H. 3.94
Cost for 1.00 Kg Total 30.20
Say 30.00
599 Providing and fixing 6mm thick bevelled edge mirror of superior glass of approved quality and approved make with VHP tap (
& 25mm dia stainless steel stud and 10mm brush finish stainless steel trims machine cut in required size and shape as appro
Detail of cost for 1.00 no as per quotations Unit Qty. Rate Amount
MR 6mm thick Mirror sqm 1.00 700.0 700.00
Labour fixing sqm 1.00 150.0 150.00
Add 18% GST 153.00
Sub Total 1003.00
Add water charges @ 1% 10.03
Sub Total 1013.03
Add Contractor Profit & OH @ 15% 151.95
Total 1164.98
Say 1165.00
601 Providing and fixing counters (Reception ,Wash basin or other similar location) with 12 mm thick antibacterial anti fungal, bo
water resistant
Detail of cost of heat
1 sqmresistant, impact resistant, insulative non conductive, stain resistant, scratch resistant, Green Guard certi
Description Unit Quantity Rate Cost
73 12mm Corian Counters sqm 1 9400.00 9400.00
Add 28% GST 2632.00
TOTAL 12032.00
Add for water charges @ 1% 120.32
12152.32
Add for contractor's profit and overheads @ 15% 1822.85
Cost for 1 Sqm 13975.17
Say 13975.00
602 Extra over above item , for providing oval shaped wash basin of size 550 x 430 x200 mm in vanity counter, made of moul
surface
Detail ofof 12ofmm
cost thick Acrylic solid of same specification as above, and in approved colour and design, all complete as
1 sqm
Description Unit Quantity Rate Cost
74 Extra for oval shaped wash basin sqm 1 5800.00 5800.00
Add 18% GST 1044.00
TOTAL 6844.00
Add for water charges @ 1% 68.44
6912.44
603 Providing and fixing Urinal Partition of 12mm thick board both side decorative compact laminate of required colour ,shade a
sizes
Detailasofmanufactured byasMerino
cost for 1.00 no or Greenlam or T Line or Unit
per quotations approved equivalent
Qty. including all stainless steel Amount
Rate accessories/ fitti
604 Providing and fixing wall cladding with 12 mm thick antibacterial anti fungal, boiling water resistant heat resistant, imp
resistant, insulative
Detail of cost non conductive, stain resistant, scratch resistant, Green Guard certified Acrylic solid surface of approved m
of 1 sqm
Description Unit Quantity Rate Cost
75 12mm thick Acrylic solid surface wall cladding including sqm 1 9400.00 9400.00
Customized design as per drawings
9400.00
Add18% GST 1692.00
TOTAL 11092.00
Add for water charges @ 1% 110.92
11202.92
606 Fabrication, Supply & Installation of SS Bollard as Approved make of Stainless Steel 304 grade Bollard , Height-900mm, Diamet
114mm,thickness of bollard -2mm , Base plate dia –210mm, Fixed to floor with Chemical fasteners as per refer drawing LKO-
Detail of cost of 1 no.
Description Unit Quantity Rate Cost
86 SS BOLLARD 304 GRADE each 1 8066.50 8066.50
Anchor fastner each 3 250.00 750.00
Installation Charges each 1 150.00 150.00
8966.50
Add 18% GST 1613.97
TOTAL 10580.47
Add for water charges @ 1% 105.80
10686.27
607 Providing, making and placing in position Check-in counters made up from 19mm thick block board covered w
Cost for 1 Ticket Counter Unit Quantity Rate Amount
Material ( Including wastage )
608 Providing, making and placing in position Ticket Counter made up from 19mm thick block board covered with 1.00
Cost for 1 Ticket Counter Unit Quantity Rate Amount
Material ( Including wastage )
19mm thick block board Sqm 11.00 1,296.13 14257.48
1.5mm thick Laminate Sqm 23.10 235.00 5428.50
8mm thick ply sqm 1.55 731.79 1136.10
Wood batten ( 19 x 24mm ) mtr 2.25 65.00 146.25
Acrylic solid surface 12mm thick Sqm 4.50 7,200.00 32400.00
adding 18 % GST 5,832.00
59,200.33
Adhesive,nails,screws etc L.S 1,000.00
sundries,tools & plants etc L.S 500.00
Telescopic Channel each 6.00 220.00 1,320.00
62,020.33
Adding 30% Labour 18,606.10
total 80,626.43
adding 1% Water & electricity charges 806.26
81,432.69
Adding 15% C.P & O.H 12,214.90
93,647.60
Cost for 1 Counter Say 93648.00
609 Providing, making and placing in position Immigration counters made up from 19mm thick block board covered w
Cost for 1 Ticket Counter Unit Quantity Rate Amount
Material ( Including wastage )
19mm thick block board Sqm 14.50 1,296.13 18793.95
1.5mm thick Laminate Sqm 27.50 235.00 6462.50
8mm thick ply sqm 1.55 731.79 1136.10
Wood batten ( 19 x 24mm ) mtr 2.25 65.00 146.25
Acrylic solid surface 12mm thick Sqm 6.50 7,200.00 46800.00
adding 18 % GST 8,424.00
81,762.80
Adhesive,nails,screws etc L.S 1,250.00
sundries,tools & plants etc L.S 500.00
610 Providing, making and placing in position Custom Counter made up from 19mm thick block board covered with 1.00
Cost for 1 Ticket Counter Unit Quantity Rate Amount
Material ( Including wastage )
19mm thick block board Sqm 14.50 1,296.13 18793.95
1.5mm thick Laminate Sqm 27.50 235.00 6462.50
8mm thick ply sqm 1.55 731.79 1136.10
Wood batten ( 19 x 24mm ) mtr 2.25 65.00 146.25
Acrylic solid surface 12mm thick Sqm 6.50 7,200.00 46800.00
adding 18 % GST 8,424.00
81,762.80
Adhesive,nails,screws etc L.S 1,250.00
sundries,tools & plants etc L.S 500.00
Telescopic Channel each 6.00 220.00 1320.00
84,832.80
Adding 30% Labour 25,449.84
total 110,282.64
adding 1% Water & electricity charges 1,102.83
111,385.47
Adding 15% C.P & O.H 16,707.82
128,093.29
Cost for 1 Counter Say 128093.00
611 Providing, making and placing in position Information Desk made up from 19mm thick block board covered w
Cost for 1 Information Desk
Unit Quantity Rate Amount
Material ( Including wastage )
19mm thick ( BWP ) Block board sqm 19.00 1,296.13 24626.55
1.0mm thick white Laminate with 18% GST sqm 9.50 266.00 2527.00
27,153.55
Acrylic solid surface 12mm thick ( Any Shade ) sqm 21.00 7,200.00 151200.00
adding 18 % GST 27,216.00
178,416.00
Adhesive,nails,screws etc L.S 1,000.00
sundries,tools & plants etc L.S 500.00
179,916.00
Adding 30% Labour 53,974.80
total 233,890.80
adding 1% Water & electricity charges 2,338.91
236,229.71
Adding 15% C.P & O.H 35,434.46
271,664.16
Cost for 1 DESK Say 271664.00
612 Providing, making and placing in position Inspection Desk made up from 19mm thick block board covered with 1.00
613 Providing, making and placing in position Writing Desk ( twin sided) made up from 19mm thick block board cove
Cost for 1 writing Desk
Unit Quantity Rate Amount
Material ( Including wastage )
19mm thick ( BWP ) Block board sqm 19.00 1,296.13 24626.55
1.0mm thick white Laminate with 18% GST sqm 9.50 266.00 2527.00
27,153.55
Acrylic solid surface 12mm thick ( Any Shade ) sqm 21.00 7,200.00 151200.00
adding 18 % GST 27,216.00
178,416.00
Adhesive,nails,screws etc L.S 1,000.00
sundries,tools & plants etc L.S 500.00
179,916.00
Adding 30% Labour 53,974.80
total 233,890.80
adding 1% Water & electricity charges 2,338.91
236,229.71
Adding 15% C.P & O.H 35,434.46
271,664.16
Cost for 1 DESK Say 271664.00
614 Providing and fixing in position security check inspection & X-ray Monitoring table of following sizes
a) Detail of cost for 1 Table of Size 1500 x 600
19mm thick waterproof commercial block board
( Including 15% wastage ) Sqm 3.00 1296.13 3888.40
adding 18% GST 699.91
Acrylic solid Surface white Sqm 7.00 7200.00 50400.00
adding 18% GST 9072.00
64060.32
Labour :
Cartage L.S 200.00
Adhesive,nails,screws etc L.S 500.00
615 Providing, making and placing in position security check & stamping table Pedestal ( gents) made up from 19mm th
Cost for 1 security check & stamping table
Unit Quantity Rate Amount
Material :
19mm commercial Board Sqm 3.50 1,296.13 4536.47
12m mthick Acrylic solid sheet Sqm 3.00 7,200.00 21600.00
20mm thick Granite stone Sqm 1.00 2500.00 2500.00
28636.47
adding 18% GST 5154.56
33791.04
Labour :
Adhesive,nails,screws etc L.S 500.00
sundries,tools & plants etc L.S 500.00
Cartage L.S 200.00
34991.04
Adding 30% Labour 10497.31
total 45488.35
adding 1% W.C charges 454.88
45943.23
adding 15% W.C charges 6891.48
52834.71
Cost Per Pedestral 52835.00
616 Providing, Fabricating and installation in position of Security check for ladies (Frisking Booth ) comprising
Detail of cost for 1 Unit
Material :
Unit Quantity Rate Amount
S.S Section 50 x 50 x 3mm Kg 172.65 300.00 51795.72
SS Cap Plate 160 x 160 x 3mm thick Kg 4.82 300.00 1446.00
M.S Plate 130 x 130 x 12mm thick Kg 13.00 60.00 780.00
Argon Welding ( 0.050*4 *34 ) =6800mm or 68
cm or 265 Inch ( Cost for Argon welding is Rs. 20/-
Per Inch ) Inch 265.00 20.00 5300.00
12mm thick Toughened Glass Sqm 11.00 2152.00 23672.00
3MM Fasara Film ( Rate as per Qutation ) Sqm 11.00 3069.30 33762.30
SS Studs No. 24.00 150.00 3600.00
Curtain Pipe Mtr 1.50 100.00 150.00
Fasteners No. 16.00 35.00 560.00
Curtain Sqm 3.24 700.00 2268.00
Grinding ,Rubbing & Polishing 1000.00
124334.02
Labour :
Adding 30% Labour 37300.21
620 Supplying and Laying Drain Boards Soprema , Ovidrain, Fosroc or as approved equivalent with factory prefixed geotex
consisting of High
Detail of cost Density Polyethylene nodular sheet with height of 7-8mm, with geotextile (pre attached to the nodular sh
of 1 sqm
Description Unit Quantity Rate Cost
Detail of cost for 1.00 sqm as per quotations sqm 1 195.00 195.00
Labour fixing sqm 1 50.00 50.00
245.00
Add18% GST 44.10
TOTAL 289.10
Add for water charges @ 1% 2.89
291.99
621 Providing and fixing Vitreous China waterless unrinals of size 336.5mm x 495.3mm x 3302mm. Make Zeroflush (Model
No 2F 501) or approved equivalent make
Details . Thefor
of cost quoted
1 Nos.rate shall include thecost of wall hung fixture i.e. waterless
Description Unit Quantity Rate Cost
to IS 277(2003) of
4 part II fabricated
ed to both faces of
al reinforcement at
e shutter would be
r leaf ),appropriate
pproved equivalent
..
to IS 277(2003) of
4 part II fabricated
ed to both faces of
al reinforcement at
e shutter would be
r leaf ),appropriate
pproved equivalent
..
make or approved
ma(TZ-5000)/Hafele
uivalent make with
te finish = Metallic
decorative compact
do or equivalent as
all with stripe shoe
or, twin coat hook,
te as per drawings.
Engineer in charge.
or the hardwares.
te finish = Metallic
g using as approved
0 microns thick and
first coat shall be at
ny, upto all heights
mber and thorough
acks, crumbled
should be applied
oxy floor surface
m solid content of
be applied to
applied as per
sqm
gineer in charge..
gineer in charge...
C/ Masonry surface
ed weather sealant
nd filling the same
nchoring, grouting,
external surface of
l complete as per
. The stainless steel
alloy AlMnlMgl as
d surface and finish
n finished/covered
ineer-in-charge for
e erection / fixing /
essories insulation,
cation including sky
omplete as desired.
rtosar or approved
am distance of 400
stem must confirm
ng tool/Scaffolding
ufactured from FRP
roof periphery like
per the direction of
r coated galvanized
e of 130 to 316mm
IS 277 with colour
microns alkyde coat
g to AS 1397 and BS
, Labours,
ts, masking tape,
ction of Engineer in
d to interlock baffle
ed length or as per
n-charge..
d to interlock baffle
ed length or as per
n-charge..
d to interlock baffle
ed length or as per
ngineer-in-charge.
ories like Fasteners,
ections of Engineer-
d to interlock baffle
ed length or as per
n-charge.
ories like Fasteners,
ections of Engineer-
76 Parts 20-22 as
tional anti-corrosive
up to a standard of
r VOC Content and
equired shade over
g, drying, providing
r specification and
s. Application to be
turer and direction
ed 36.50mm thick
er 12.50 Laminated
d shape as required
ur and shade with
.0 both glass heat
l complete for the
d as directed by the
fixing of IGU Panels
of the glass panels
ed in sqm.“.
t strengthen (HS)/
ghened clear glass
flection external 10
kg.
kg.
kg.
kg.
kg.
kg.
kg.
kg.
luding SS fittings ,
neer-in-charge .
sqm
sqm
, EPF-724/TP/TA -
2mm)/ DORMA
to EN 1154,
gth (size EN 2-4)
ttom rail shall be
trolled closing
d drawings and to
sqm
ed guard railing of
ed with SS modular
8 CSK head anchors
e with satin finish,
all includes cost &
& making good the
d lift etc. complete
ne by a specialized
S 11433-1995, in
ompatible with the
accidental spillage
tion of sealant etc.
quantity (Length X
per sqm
made of moulded
ll complete as per
respect as desired
C & C router design
00mm, Diameter –
r drawing LKO-INT-
prefixed geotextile)
the nodular sheet
sqm
MACHINERY
27 0013 Machine for rubbing of floors Day 350.00
28 0018 Hire and running charges of Loader Day 6000.00
29 0020 Hydraulic excavator (3D) with driver and fuel Day 6500.00
MATERIALS : Shalimar
30 Stone Aggregate (Single size) : 40 mm nominal size cum
with 5% GST
0293 2096.00
31 Stone Aggregate (Single size) : 20 mm nominal size cum
with 5% GST
0295 2212.00
32 Stone Aggregate (Single size) : 10 mm nominal size cum
with 5% GST
0297 2048.00
33 0367 Portland Cement tonne 5700.00
34 0368 White Cement tonne 11200.00 14600.00
35 0451 Brass screws 30 mm 100 Nos 140.00
36 0586 Chromium plated Brass screws 40 mm 100 Nos 310.00
37 0982 Coarse sand (zone III) cum 3490.00
38 0983 Fine sand (zone IV) cum 1060.00
39 1159 Stone dust cum 2484.00
Saint
Gobain
49 8778 12mm thick toughened glass sqm 1442.00
50 36.50 mm Laminate DGU sqm 5689.00
T Line
58 Toilet Cubicles -L Type each 37500.00
Installation Charges each 2000.00
Gross Rate - Toilet Cubicle- each 39500.00
59 Toilet Cubicles -I Type each 27000.00
Installation Charges each 1500.00
Gross Rate - Toilet Cubicle- each 28500.00
Lloyd
60 Aluminium Roofing System Complete item sqm 5780.00
61 Aluminium Gutter Complete metre
item( 1800+1200+1200 =4200mm girth)
7000.00
62 Fall Protection System Complete item metre 5500.00
63 Walkways System Complete item metre 6000.00
64 Step Walkways System Complete item metre -
65 Roof Hatch System Complete item each 242000.00
66 1.2mm thick Profile Deck floor sqm 1850.00
Gallina
Bansal(LG )
73 12mm Corian Counters sqm 8180.64
Fabrication/Installation Charges each 3767.40
Gross Rate - Corian Counters each 11948.04
74 Extra for oval shaped wash basin sqm 5800.00
75 12mm thick Acrylic solid surface wall cladding
including Customized design as per drawings
sqm 13455.00
Extra for custmaised design sqm 3767.40
Euronics
76 Aluminium Entrance Matting sqm 1529.15
Navair
Rinox
87 Trolley Fender - Floor metre 2550.00
88 Trolley Fender - Wall metre 2550.00
Stonetech
89 CNC Cutting - Sandstone sqm 5918.00
TATA
90 Structrual steel ( YST-310) kg 44.67
593.00
593.00
710.00
653.00
710.00
653.00
536.00
536.00
536.00
710.00
653.00
710.00
710.00
653.00
693.00
710.00
593.00
710.00
653.00
653.00
593.00
681.50
681.50
593.00
1.73
350.00
6000.00
6500.00
2200.80
2322.60
2150.40
5700.00
14600.00
140.00
310.00
3664.50
1113.00
2608.20
10.00
5200.00
92.24
2000.00
2000.00
2000.00
2000.00
2400.00
2400.00
Pilkington
1718.00 1442.00
5500.00 5500.00
Dorma Yale
365.80 365.80
228.63 228.63
461.38 461.38
2865.93 2504.20
2645.91 2851.18 2504.20
488.23 177.00
2402.18 2039.93 2039.93
Greenlam Merino
38700.00
1500.00
40200.00 40500.00 39500.00
28500.00
1500.00
30000.00 28500.00
3892.63 3680.00
Roof &
Kalzip Ceiling
5600.00 6260.00 5600.00
Durlum Lindner
7273.00
7340.00
7357.00
7612.00
950.00
Akzonobel Berger
800.00
309.16
70.00
4770.00 3144.70
130.00 109.16
5770.00 3563.02 3563.02
Neonnex
7200.00 7200.00
2200.00
9400.00 9400.00
12675.00 5800.00
9400.00 9400.00
3750.00 3750.00
1529.15
iclean Sukrti
Ozone Dorma
2900.00 11491.00 2550.00
3200.00 11491.00 2550.00
5918.00
APL
46.20 44.67
Unit = cum
Taking output = 10 cum.
a) Labour
Mate day 0.32 233.50 74.72
Mazdoor for filling, watering, ramming etc. day 7.00 213.50 1494.50
Mazdoor (Skilled) day 1.00 253.50 253.50
b) Material
Filter media of stone aggregate conforming cum 12.00 1015.00 12180.00
to clause 2504.2.2. of MoRTH
specifications.
c) Machinery
Water Tanker of 6 KL capacity hour 0.06 506.09 30.37
d) P&M Charges@ 15 % on (a+b+c) 2104.96
e) Contractor's profit @ 15 % on (a+b+c+d) 2420.71
WATER
SUB- CHARGES SUB- CONTRACTOR
UNITS QUANTITY RATE GST(18%) TOTAL TOTAL PROFIT(15%)
TYPE OF BEARING (1%)
Free float bearing-1550 KN Nos 1 17390 3130.2 20520.2 205.202 20725.4 3108.8103
Providing and Fixing High tensile steel wires/strands including all accessories for pre-stressing system of make TATA, Freyssinet,Usha
233 martin,VSL ,sanfield or approved , stressing operations and grouting complete as per drawing and Technical specifications.HTS in PSC
Girders
WATER
Rate per SUB- CHARGES SUB- CONTRACTOR
Description of Item UOM Qty GST(18%)
unit TOTAL TOTAL PROFIT(15%)
(1%)
a ANCHOR CONE 19S15 Nos. 44 1,820.00 327.6 94494.4 944.944 95439.34 14315.9016
b ANCHOR HEAD 19S15 Nos. 44 1,780.00 320.4 92417.6 924.176 93341.78 14001.2664
c HDPE Sheathing 107 (HD) RM 1260 140 25.2 208152 2081.52 210234 31535.028
d WEDGES 15.2mm RM 850 30 5.4 30090 300.9 30390.9 4558.635
e ANCHOR CONE 19S13 Nos. 20 1020 183.6 24072 240.72 24312.72 3646.908
f ANCHOR HEAD 19S15 Nos. 20 895 161.1 21122 211.22 21333.22 3199.983
g HDPE Sheathing 85 (HD) RM 440 115 20.7 59708 597.08 60305.08 9045.762
h WEDGES 12.7mm RM 360 30 5.4 12744 127.44 12871.44 1930.716
i ANCHOR CONE 7S13 Nos. 8 580 104.4 5475.2 54.752 5529.952 829.4928
j ANCHOR HEAD 7S13 Nos. 8 460 82.8 4342.4 43.424 4385.824 657.8736
k HTS 12.7 MM MT 6 75,000.00 13500 531000 5310 536310 80446.5
l HTS 15.2 MM MT 28 75,000.00 13500 2478000 24780 2502780 375417
All charges for execution of Post tensioning
m equipments and technicians including, stressing MT 35 28000 5040 1156400 11564 1167964 175194.6
& Grouting works.
For 35 MT
For 1 MT
242.00 Providing, fixing, testing and commissioning of UPVC rain water pipes (IS : 4985 ‐1983, 6.00
Kg/cm2 pressure rating) including injection moulded fittings (heavy duty) (plain or door) e.g.
bends, junction, cowls, tees, offsets, access pieces etc. Clamps/Supports jointing with rubber
ring/solvent cement joints including cutting chase or holes in walls and floors and making
good as required at Site. 110mm dia pipe
Labour
Fitter Ist Class Each 0.23 710.00 163.30
Beldar Each 0.45 536.00 241.20
Bandhani Each 0.11 593.00 65.23
Total 1 to 5 1857.98
Add 1% For Water Charges % 1% 18.58
Total 1876.56
Add 15% Contractor Profit & Over Heads % 15% 281.48
Cost for 6 mtr. 2158.04
Cost per metre 359.67
Unit = cum
Taking output = 120 cum
a) Material
Cement tonne 50.64 5792.24 293319.03 5792.24
Coarse sand cum 54.00 1303.77 70403.58 1303.77
20 mm Aggregate cum 64.80 1403.77 90964.30 1403.77
10 mm Aggregate cum 43.20 1403.77 60642.86 1403.77
b) Labour
Mate day 0.88 360.00 316.80
Mason day 3.00 307.00 921.00
Mazdoor day 19.00 274.00 5206.00
c) Machinery
Batching Plant @ 20 cum/hour hour 6.00 3143.34 18860.04
Generator 100 KVA hour 6.00 780.15 4680.90
Loader hour 6.00 1135.09 6810.57
Transit Mixer ( capacity 4.0 cu.m )
Transit Mixer 4 cum capacity lead upto1 Km hour 15.00 1309.72 19645.87
Lead beyond 1 Km, L - lead in Kilometer,L=20 tonne.k 300L 15.72 94300.18
m
Concrete Pump hour 6.00 360.17 2161.05
Basic Cost of Labour, Material & Machinery (a+b+c) 668233.00
for 120 cum
Height 5m to 10m
Basic Cost of Labour, Material & Machinery (a+b+c) for 120 668233.00
cum
d) Formwork and staging 31 per cent of (a+b+c) 26.00 207152.23
e) Plant & machinery charges @ 25% on (a+b+c+d) 218846.31
f) Contractor's profit @ 15% on (a+b+c+d+e) 164134.73
Cost for 120 cum = a+b+c+d+e+f 1258366.27
Rate per cum = (a+b+c+d+e+f)/15 10486.39
say 10486.00
Providing and supplying Structural Cement
concrete of grade M-35 for cast in situ pier,pile
1350 cap,etc complete including cost of
shuttering,but excluding reinforcement as per
drawing.
Unit = cum
Taking output = 120 cum
a) Material
Cement tonne 50.64 5792.24 293319.03
Coarse sand cum 54.00 1303.77 70403.58
20 mm Aggregate cum 64.80 1403.77 90964.30
10 mm Aggregate cum 43.20 1403.77 60642.86
b) Labour
Mate day 0.88 360.00 316.80
Mason day 3.00 307.00 921.00
Mazdoor day 19.00 274.00 5206.00
c) Machinery
Batching Plant @ 20 cum/hour hour 6.00 3143.34 18860.04
Generator 100 KVA hour 6.00 780.15 4680.90
Loader hour 6.00 1135.09 6810.57
Transit Mixer ( capacity 4.0 cu.m )
Transit Mixer 4 cum capacity lead upto1 Km hour 15.00 1309.72 19645.87
Lead beyond 1 Km, L - lead in Kilometer,L=20 tonne.k 300L 15.72 94300.18
m
Concrete Pump hour 6.00 360.17 2161.05
Basic Cost of Labour, Material & Machinery (a+b+c) 668233.00
for 120 cum
Height 5m to 10m
Basic Cost of Labour, Material & Machinery (a+b+c) for 120 668233.00
cum
d) Formwork and staging 28 per cent of (a+b+c) 28.00 187105.24
e) Plant & machinery charges @ 25% on (a+b+c+d) 213834.56
f) Contractor's profit @ 15% on (a+b+c+d+e) 160375.92
Cost for 120 cum = a+b+c+d+e+f 1229548.72
Rate per cum = (a+b+c+d+e+f)/120 10246.24
say 10246.00
Unit = cum
Taking output = 120 cum
a) Material
Cement tonne 51.60 5792.24 298879.58
Coarse sand cum 54.00 1303.77 70403.58
20 mm Aggregate cum 64.80 1403.77 90964.30
10 mm Aggregate cum 43.20 1403.77 60642.86
Admixture @ 0.4 per cent of cement kg 206.40 75.00 15480.00
b) Labour
Mate day 0.94 360.00 338.40
Mason day 3.50 307.00 1074.50
Mazdoor day 20.00 274.00 5480.00
c) Machinery
Batching Plant @ 20 cum/hour hour 6.00 3143.34 18860.04
Generator 100 KVA hour 6.00 780.15 4680.90
Loader hour 6.00 1135.09 6810.57
Transit Mixer ( capacity 4.0 cu.m )
Transit Mixer 4 cum capacity lead upto1 Km hour 15.00 1309.72 19645.87
Lead beyond 1 Km, L - lead in Kilometer,L=20 tonne.k 300L 15.72 94300.18
m
Concrete Pump hour 6.00 360.17 2161.05
Basic Cost of Labour, Material & Machinery (a+b+c) for 689722.00
120 cum
Height 5m to 10m
Basic Cost of Labour, Material & Machinery (a+b+c) for 120 689722.00
cum
d) Formwork and staging 28 per cent of (a+b+c) 28.00 193122.16
e) Plant & machinery charges @ 25% on (a+b+c+d) 220711.04
f) Contractor's profit @ 15% on (a+b+c+d+e) 165533.28
Cost for 120 cum = a+b+c+d+e+f 1269088.48
Rate per cum = (a+b+c+d+e+f)/120 10575.74
say 10576.00
1354 Pin Slide Guide Bearing-625 KN Nos 1 44410 7993.8 52403.8 524.038 52927.84 7939.1757
1355 Pin fixed Bearing-400-2475 KN Nos 1 168550 30339 198889 1988.89 200878 30131.6835
1356 Pin fixed Bearing-100-325 MT Nos 1 232500 41850 274350 2743.5 277093.5 41564.025
1357 Pin Slide Guide Bearing-185 MT Nos 1 169770 30558.6 200328.6 2003.286 202332 30349.7829
1358 Free float bearing-600 MT Nos 1 148000 26640 174640 1746.4 176386.4 26457.96
WATER
SUB- CHARGES SUB- CONTRACTOR
UNITS QUANTITY RATE GST(18%) TOTAL TOTAL PROFIT(15%)
(1%)
Cost for 1 R.mt R.mt 1 1490 268.2 1758.2 17.582 1775.782 266.3673
a metal piston
st stainless steel
part-I & II
wing and approved
TOTAL
23834
A, Freyssinet,Usha
ations.HTS in PSC
TOTAL
109755
107343
241769
34949.54
27959.63
24533.2
69350.84
14802.16
6359.445
5043.698
616756.5
2878197
1343159
5479977
156571
TOTAL
60867
231010
318658
232682
202844
TOTAL
2042
PLANTING LIST
Sym.
NO.
1 A CAD
2 A IND
3 B MAL
4 B BLA
5 B FRO
6 C TAB
7 C FIS
8 C SPE
9 C LAN
10 D SIS
11 D REG
12 E IND
13 F LYR
14 F VIR
15 F INF
16 J MIM
17 L THO
18 L FLO
19 M IND
20 P ALB
21 P ACU
22 S OLE
1 F TAIL
2 F TIL
3 K TIA
4 P SYL
5 P MAC
6 R REG
7 W FIL
8 W ROB
1 A palm
2 C ele
3 C cir
4 C top
5 C rev
6 F mic
7 M top
8 N ina
9 P roe
10 R exc
1 B bel
2 C bif
3 C hae
4 C pul
5 F ben
6 E mar
7 G bam
8 H pat
9 H bis
10 H laf
11 H snow
12 Ixo
13 L ind
14 M bam
15 N ole
16 P cap
17 T cap
18 T gau
Tmc
19 dwarf
Y syl
20
Y ele
21
1 a nia
2 dia
3 d rel
4 d var
5 f long
6 f reg
7 h cia
h pat
8
9 ire
10 ine
l sel
11
l cam
12
13 o phi
14 p sel
15 s yng
16 s lum
17 r foun
T mc var
18
19 w foun
20 w tri
21 y foun
TREE
Anthecophalus cadamba having height of 10-12ft stright & sturdy branches big poly bag 50.00
well developed.
Azadirachta indica having height of 10-12ft stright & sturdy branches big poly bag well 10.00
developed.
Bombax Malabaricum having height of 10-12ft stright & sturdy branches big poly bag 10.00
well developed.
Bauhinia Blackie having height of 10-12ft stright & sturdy branches big poly bag well 20.00
developed.
Butea frondosa having height of 10-12ft stright & sturdy branches big poly bag well 20.00
developed.
Chukrasia Tabularis having height of 10-12ft stright & sturdy branches big poly bag well 9.00
developed.
Cassia Fistula having height of 10-12ft stright & sturdy branches big poly bag well 250.00
developed.
Chorisia speciosa having height of 10-12ft stright & sturdy branches big poly bag well 25.00
developed.
Callistemon lanceolatus having height of 10-12ft stright & sturdy branches big poly bag 19.00
well developed.
Dalbergia Sissoo having height of 10-12ft stright & sturdy branches big poly bag well 22.00
developed.
Delonix regia having height of 10-12ft stright & sturdy branches big poly bag well 18.00
developed.
Erythrina Indica having height of 10-12ft stright & sturdy branches big poly bag well 21.00
developed.
Ficus Lyrata having height of 4-6 ft stright & sturdy branches big poly bag well 150.00
developed.
Ficus virens having height of 10-12ft stright & sturdy branches big poly bag well 125.00
developed.
Ficus infectoria having height of 10-12ft stright & sturdy branches big poly bag well 110.00
developed.
Jacaranda mimosaefolia having height of 10-12ft stright & sturdy branches big poly bag 21.00
well developed.
Lagerstroemia speciosa having height of 10-12ft stright & sturdy branches big poly bag 19.00
well developed.
Lagerstroemia Floribunda having height of 10-12ft stright & sturdy branches big poly bag 47.00
well developed.
Mangifera Indica having height of 10-12ft stright & sturdy branches big poly bag well 15.00
developed.
Plumeria alba multi branched in height 6-8ft in poly bag well developed. 250.00
Plumeria Acutifolia multi branched in height 6-8 ft in poly bag well developed. 140.00
Salvadora oleoides having height of 10-12ft stright & sturdy branches big poly bag well 16.00
developed.
Phoenix sylvestrix (date palm) having height of 8-10ft trunk with 60-70 leves well 136.00
developed in big container pot bond condition.
Ptychosperma macarthurii having height of 8-10ft trunk with 60-70 leves well developed 162.00
in big container pot bond condition.
Roystonea Regia having height of 8-10ft trunk with 60-70 leves well developed in big 102.00
container pot bond condition.
Washingtonia filifera (palm) having height of 6-8ft trunk with 60-70 leves well developed 88.00
in big container pot bond condition.
Washingtonia Robusta (palm) having height of 6-8ft trunk with 60-70 leves well 26.00
developed in big container pot bond condition.
ORNAMENTAL PLANT
Areca palm ht of plants 90-120 cm with 60-70 leaves in in big size polybag well 777.00
developed.
Chamaedorea elegans ht of plants 90-120 cm with 60-70 leaves in in big size polybag 1365.00
well developed.
Cycas circinalis having trunk ht of 100-120 cm disease free fresh leaves in big size 225.00
polybag well developed.
Casuarina topiary multi ball topiary well branched (bushy) of height 150-180 cm in big 50.00
size polybag well developed.
Cycus revoluta having trunk ht of 45-60 cm with 75-90 disease free fresh leaves in big 380.00
size polybag well developed.
Ficus Microcarpa multi ball topiary well branched (bushy) of height 150-180 cm in big 50.00
size polybag well developed.
Melaleuca topiary single ball topiary well branched (bushy) of height 150-180 cm in big 50.00
size polybag well developed.
Nolina ht of plants 90-100 cm in big size polybag well developed. 40.00
Phoenix roebelenii having trunk of 60-75 cm with 45 leaves in big size gunnybag well 90.00
developed.
Raphis excelsa ht of plants 50-60 cm with 6-8 suckers in big size gunnybag well 775.00
developed.
Shrubs plant
Buddha belly golden(B bel) ht of plants 150-180 cm in polybag size of 20 cm well 200.00
developed.
Cassia biflora of height 80-90 cm in big size polybag well developed. 577.00
Calliandra haematocephala of height 80-90 cm in big size polybag well developed. 628.00
Caesalpinia pulcherrima ht of plants 90-120 cm in big size polybag well developed. 560.00
Ficus benjamina ht of plants 120-150 cm in big size polybag well developed. 38.00
Ensete maurelii ht of plants 90-120 cm in big size polybag well developed. 310.00
Hamelia dwarf bushy ht of plants 35-45 cm in big size polybag well developed. 2291.00
Hibiscus pink tips ht of plants 50-60 cm in big size polybag well developed. 250.00
Hibiscus lafrance ht of plants 50-60 cm in big size polybag well developed. 250.00
Hibiscus snowflake ht of plants 50-60 cm in big size polybag well developed. 2555.00
Lagerstroemia Indica ht of plants 90-100 cm in big size polybag well developed. 618.00
Nerium oleander dwarf ht of plants 90-100 cm in big size polybag well developed. 201.00
Tecoma gaudichaudi ht of plants 80-90 cm in big size gunnybag well developed. 583.00
Tabernaemontana coronaria dwarf ht of plants 50-60 cm bushy in big size gunnybag well 952.00
developed.
Yucca sylvestrix well branched (bushy) of height 50-60 cm in poly bag of 30 cm size 50.00
gunnybag well developed.
Yucca elephantipes well branched (bushy) of height 90-120 cm in poly bag of 30 cm size 50.00
gunnybag well developed.
Dracaena pleomele reflexa ht of plants 30-45 cm in poly bag. (11 Nos./sqmt) 150.00
Dracaena variegated tricolour ht of plants 30-45 cm in poly bag . (11 Nos./sqmt) 150.00
Ficus longisland well developed of height 30-40 cm in poly bag of size 20 cm. (11 2810.00
Nos./sqmt)
Ficus reginald well developed of height 30-40 cm in poly bag of size 20 cm. (11 448.00
Nos./sqmt)
Heliconia ht of plants 30-45 cm in polybag (11 Nos./sqmt) 484.00
Iresine well developed of height 15-30 cm in poly bag of size 20 cm (24 Nos./sqmt 150.00
Clerodendron inerme well developed of height 15- 30 cm in big poly bag (24 Nos./sqmt) 1883.00
Red Fountain grass well develope of height 15-30 cm in polybag (11 Nos./sqmt) 1271.00
Yellow Fountain grass well develope of height 15-30 cm in polybag (11 Nos./sqmt) 1402.00
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
MACHINERY
27 0013 Machine for rubbing of floors Day 350.00
28 0018 Hire and running charges of Loader Day 6000.00
29 0020 Hydraulic excavator (3D) with driver and fuel Day 6500.00
MATERIALS : Shalimar
30 Stone Aggregate (Single size) : 40 mm nominal cum
0293 size with 5% GST 1250.00 2096.00
31 Stone Aggregate (Single size) : 20 mm nominal cum
0295 size with 5% GST 1300.00 2212.00
32 Stone Aggregate (Single size) : 10 mm nominal cum
0297 size with 5% GST 1300.00 2048.00
33 0367 Portland Cement tonne 5700.00
34 0368 White Cement tonne 11200.00 14600.00
35 0451 Brass screws 30 mm 100 Nos 140.00
36 0586 Chromium plated Brass screws 40 mm 100 Nos 310.00
37 0982 Coarse sand (zone III) cum 1200.00 3490.00
38 0983 Fine sand (zone IV) cum 760.00 1060.00
39 1159 Stone dust cum 865.00 2484.00
40 Cutting marble or sand stone slab up to 50 mm metre
1237 thick by mechanical device 10.00
41 Common burnt clay F.P.S.( non modular) bricks 1000 Nos
1984 tile class designation 10 5200.00
42 2209 Carriage of white Cement tonne 92.24
43 2209 Carriage of white Cement tonne 92.24
NON-DSR
44 European Water Closet Each 9340.00 8910.00
45 In wall Concealed Cistern Each 6810.00 6120.00
S.No. DSR Ref Description of Rate Unit DSR Rate Rate-1 Rate-2
45 Wash Basin Each 8090.00 2140.00
46 Urinal Each 7900.00 16180.00
46 Flushing system Urinal Each 18490.00 7000.00
47 Stainless steel sink double bowl single drain board Each 11180.00 12717.00
47 Shortbody Bib cock Each 2360.00 690.00
48 Long body Bib cock Each 1190.00 960.00
48 CP Brass Towel rail Each 6450.00 1100.00
49 CP Brass Towel ring Each 1180.00 760.00
49 SS Liquid soap dispenser Each 19993.00 3220.00
50 CP Brass bottle trap Each 1610.00 1150.00
50 C.P. brass angle valve Each 1160.00 1125.00
51 Jumbo toilet paper holder Each 3790.00 469.00
51 S.S. body tissue paper dispenser Each 1320.00 3600.00
52 Health Faucet Each 2750.00 970.00
52 Divertor Each 3995.00 4020.00
53 Shower Head with shower arm Each 14710.00 790.00
53 Bath spout Each 4120.00 1080.00
54 Grab bar Each 5150.00 1610.00
54 Sliding rail Each 6565.00 6640.00
55 WC Pan connector Each 1080.00 1160.00
55 Double coat hook Each 895.00 390.00
56 Sink Mixer Each 6560.00 3440.00
56 Automatic sensor faucet for cold water Each 19200.00 7890.00
57 Aerosol perfume dispenser Each 2180.00 1400.00
57 M.S. Pipe 150 mm dia Metre 1209.00 1180.60
58 M.S. Pipe 200 mm dia Metre 1616.02 1877.00
58 M.S. Pipe 250 mm dia Metre 2025.85 2354.00
59 M.S. Pipe 300 mm dia Metre 2411.42 2804.00
59 Reducing elbow Each 1160.00 1310.00
60 G.I. Pipe (Medium duty) 100 mm dia Each 1150.00 867.45
60 SS Grating Each 600.00 700.00
61 Dome Grating 250 mm dia Each 19500.00 20000.00
61 Dome Grating 300 mm dia Each 25000.00 27000.00
62 Cleanout plug 100 mm dia Each 600.00 590.00
62 Cleanout plug 150 mm dia Each 950.00 945.00
63 G.I. Socket 100 mm dia Each 667.00 660.00
63 G.I. Socket 150 mm dia Each 1389.00 1350.00
64 Drip seal Kg 225.00 225.00
64 C.I. 3989 150 mm dia Hubless Each 1480.00
65 G.I. Pipe Class 25 mm dia Each 339.00 216.30
65 G.I. Pipe Class 32 mm dia Each 364.00 279.80
66 G.I. Pipe Class 40 mm dia Each 415.00 322.90
66 G.I. Pipe Class 50 mm dia Each 591.00 447.40
67 G.I. Pipe Class 65 mm dia Each 739.00 563.55
67 G.I. Pipe Class 80 mm dia Each 941.00 704.40
68 G.I. Pipe Class 100 mm dia Each 1356.00 1010.90
68 G.I. Pipe Class 150 mm dia Each 2006.00 1511.00
69 CPVC Pipe 40 mm dia Each 338.50 300.00
69 CPVC Pipe 50 mm dia Each 563.50 500.00
70 CPVC Pipe 65 mm dia (Schedule 40) Each 968.50 888.33
70 SS 316 Pipe 22 mm dia Each 908.00 585.00
71 SS 316 Pipe 35 mm dia Each 1656.00 1178.00
71 SS 316 Pipe 42 mm dia Each 2034.00 1425.00
72 SS 316 Pipe 54 mm dia Each 2622.00 1846.00
72 SS 316 Pipe 75 mm dia Each 5305.00 3474.00
73 SS 316 Pipe 90 mm dia Each 6142.00 4074.00
S.No. DSR Ref Description of Rate Unit DSR Rate Rate-1 Rate-2
73 G.I. Union 100 mm dia Each 1570.00 1820.00
74 G.I. Union 150 mm dia Each 4570.00
74 Ball valve 15 mm dia Each 335.00 320.00
75 Ball valve 20 mm dia Each 462.00 455.00
75 Ball valve 25 mm dia Each 718.00 704.00
76 Ball valve 32 mm dia Each 1226.00 1216.00
76 Ball valve 40 mm dia Each 1785.00 1730.00
77 Ball valve 50 mm dia Each 2563.00 2527.00
77 Butterfly valve 65 mm dia Each 1656.00 2301.00
S.No. DSR Ref Description of Rate Unit DSR Rate Rate-1 Rate-2
78 Butterfly valve 80 mm dia Each 1841.00 2795.00
78 Butterfly valve 100 mm dia Each 2303.00 3457.00
79 Butterfly valve 150 mm dia Each 3817.00 5260.00
79 Non-return valve 65 mm dia Each 4970.00 3766.00
80 Non-return valve 150 mm dia Each 16430.00 12921.00
80 Pressure reducing valve 20 mm dia Each 1795.00 1566.00
81 Pressure reducing valve 25 mm dia Each 3266.00 2798.00
81 Pressure reducing valve 32 mm dia Each 4020.00 3508.00
82 Pressure reducing valve 40 mm dia Each 4550.00 4248.00
82 Pressure reducing valve 50 mm dia Each 6520.00 5894.00
83 Pressure reducing valve 65 mm dia Each 12052.00 10510.00
83 uPVC water pipe 25 mm dia Each 44.17 31.20
84 uPVC water pipe 32 mm dia Each 72.67 51.30
84 uPVC water pipe 40 mm dia Each 109.00 76.95
85 uPVC water pipe 50 mm dia Each 169.50 119.70
85 uPVC water pipe 63 mm dia Each 250.83 182.45
86 uPVC water pipe 75 mm dia Each 358.00 261.45
86 uPVC water pipe 90 mm dia Each 511.33 372.95
87 uPVC water pipe 110 mm dia Each 763.00 555.85
87 uPVC water pipe 160 mm dia Each 1608.33 1171.35
88 Thermal insulation 15 mm dia Each 42.00 45.00
88 Thermal insulation 20 mm dia Each 48.00 50.00
89 Thermal insulation 25 mm dia Each 55.00 55.00
89 Puddle flange 32 mm dia Each 750.00 800.00
90 Puddle flange 40 mm dia Each 800.00 900.00
90 Puddle flange 50 mm dia Each 950.00 1000.00
91 Puddle flange 65 mm dia Each 1250.00 1300.00
91 Puddle flange 80 mm dia Each 1600.00 1700.00
92 Puddle flange 100 mm dia Each 2000.00 2100.00
92 Puddle flange 150 mm dia Each 2700.00 2900.00
93 Butterfly valve with Motorized Actuator 80 mm di Each 12077.00 13568.00
93 Butterfly valve with Motorized Actuator 100 mm di Each 16390.00 19017.00
94 insect proof coupling 100 mm dia Each 800.00 850.00
94 Water flow meter 50 mm dia Each 27500.00 15100.00
95 Water flow meter 65 mm dia Each 28500.00 16900.00
95 NP3 RCC Pipe 200 mm dia Each 480.00 335.00
96 NP3 RCC Pipe 250 mm dia Each 530.00 450.00
96 NP3 RCC Pipe 300 mm dia Each 840.00 625.00
97 NP3 RCC Pipe 400 mm dia Each 1440.00 1315.00
97 NP3 RCC Pipe 500 mm dia Each 2160.00 1700.00
98 HDPE Pipe 160 mm dia Each 1245.00 762.50
98 HDPE Pipe 225 mm dia Each 2450.00 1497.50
99 HDPE Pipe 250 mm dia Each 3020.00 1845.50
99 HDPE Pipe 350 mm dia Each 6069.00 3704.00
100 HDPE Pipe 400 mm dia Each 7776.00 4796.00
100 HDPE Pipe 450 mm dia Each 9636.00 6176.50
101 HDPE Pipe 500 mm dia Each 12194.00 7615.50
101 D.I. Manhole cover 600x600 mm Each 11170.00
102 D.I. Medium duty 560 mm dia Each 124.18
102 M.S. Grating Each 90.00 100.00
Rate-3 Lowest Rate
593.00
593.00
710.00
653.00
710.00
653.00
536.00
536.00
536.00
710.00
653.00
710.00
710.00
710.00
653.00
693.00
710.00
593.00
710.00
653.00
653.00
593.00
681.50
681.50
593.00
1.73
350.00
6000.00
6500.00
2200.80
2322.60
2150.40
5700.00
14600.00
140.00
310.00
3664.50
1113.00
2608.20
10.00
5200.00
92.24
92.24
9810.00 8910.00
5180.00 5180.00
Rate-3 Lowest Rate
1790.00 1790.00
6250.00 6250.00
6960.00 6960.00
11180.00
1050.00 690.00
1205.00 960.00
1045.00 1045.00
740.00 740.00
2300.00 2300.00
1160.00 1150.00
890.00 890.00
469.00
2800.00 1320.00
1320.00 970.00
3170.00 3170.00
2990.00 790.00
910.00 910.00
1240.00 1240.00
9950.00 6565.00
1080.00
400.00 390.00
3050.00 3050.00
7670.00 7670.00
1400.00
1021.28 1021.28
1600.00 1600.00
2000.00 2000.00
2411.42
1177.00 1160.00
748.99 748.99
800.00 600.00
25000.00 19500.00
28000.00 25000.00
620.00 590.00
1020.00 945.00
750.00 660.00
1450.00 1350.00
225.00
1480.00
159.84 159.84
207.80 207.80
245.48 245.48
329.97 329.97
424.73 424.73
522.92 522.92
748.99 748.99
1115.73 1115.73
295.90 295.90
503.40 503.40
798.75 798.75
575.00 575.00
1175.00 1175.00
1420.00 1420.00
1840.00 1840.00
3474.00
4074.00
Rate-3 Lowest Rate
1626.00 1570.00
4092.00 4092.00
315.00 315.00
432.00 432.00
684.00 684.00
1161.00 1161.00
1638.00 1638.00
2430.00 2430.00
1710.00 1656.00
Rate-3 Lowest Rate
1890.00 1841.00
2430.00 2303.00
3420.00 3420.00
4300.00 3766.00
9835.00 9835.00
2750.00 1566.00
2914.00 2798.00
5315.00 3508.00
6596.00 4248.00
10280.00 5894.00
15209.00 10510.00
43.96 31.20
69.74 51.30
102.17 76.95
159.99 119.70
251.56 182.45
356.86 261.45
509.01 372.95
764.84 555.85
1668.90 1171.35
53.00 42.00
65.00 48.00
68.00 55.00
850.00 750.00
950.00 800.00
1050.00 950.00
1280.00 1250.00
1650.00 1600.00
2070.00 2000.00
3000.00 2700.00
12076.00 12076.00
12420.00 12420.00
975.00 800.00
75000.00 15100.00
80000.00 16900.00
335.00
450.00
625.00
1315.00
1700.00
657.13 657.13
1290.80 1290.80
1590.75 1590.75
3139.23 3139.23
4725.00 4725.00
5985.00 5985.00
7379.40 7379.40
11170.00
124.18
150.00 90.00
Pluming Rate Analysis
1.00 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8
partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with e
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per directi
and finished smooth.
Granite Stone of approved shade (Refer DSR-2016 Item No. 17.78 DAR 2016 Vol-II Page No. 1160)
Total A + B
C LABOUR
Fitter 1st class Each 1.00
Mason 1st class Each 1.00
Beldar Each 1.00
Total
Add GST on ITC % 18%
Total C
Total A + B + C
Add 1% for Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Total
Cost per WC
2.00 Providing and Fixing Concealed in wall Flushing Cistern with dual flush Actuator Plate (plastic body in ap
function, noise less float valve and fast filling action with all component parts of high quality including fixing fram
respects as per direction of the engineer-in-charge (Refer DSR-2016 Item No. 17.78 DAR 2016 Vol-II Page No
Total A + B
Pluming Rate Analysis
C LABOUR
Fitter 1st class Each 1.00
Mason 1st class Each 1.00
Beldar Each 1.00
Total
Add GST on ITC % 18%
Total C
Total A + B + C
Add 1% for Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Total
Cost per cistern
3.00 Providing and Fixing star white vitreous china wash basin for under counter mounting, specially fabricated b
connection pipe to wall with C.P. wall flange and rubber adopter for waste connection complete, including cut
walls wherever required (Refer Item No. 17.7A DAR 2016 Vol-II Page No. 1084)
Total A + B
C LABOUR
Fitter 1st class Each 0.33
Mason 1st class Each 0.33
Beldar Each 0.63
Total
Add GST on ITC % 18%
Total C
Total A + B + C
Add 1% for Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Total
Cost per Wash Basin
Pluming Rate Analysis
4.00 Providing and Fixing vitreous china urinal with C.I. hangers, 15mm dia inlet to built in spreaders with inbuil
complete including cutting and making good the walls and floors wherever required (Ref. DAR 2016 VOL -
1161)...
Total A + B
C LABOUR
Fitter 1st class Each 0.50
Beldar Each 0.50
Total
Add GST on ITC % 18%
Total C
Total A + B + C
Add 1% for Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Total
Cost per Urinal
5.00 Providing and Fixing electrical/battery operated concealed automatic flushing system for urinals, including fro
chrome sensor with CP brass body, ball valve etc,complete in all respect including cutting and making good th
(Ref. DAR 2016 VOL - II Ref No:17.80 Page No: 1161)...
Total A + B + C
Add 1% for Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Total
Cost per Urinal flushing system
8 Providing and Fixing stainless steel sink double bowl single drain board Size 1740x515 mm with C.I. brackets, 4
brass chain and rubber plug, CP Brass Waste coupling and C.P. wall flange rubber adapter for waste connec
cutting and making good the walls wherever required. (Ref. DAR 2016 VOL - II Ref No:17.10.1.1 Page No: 1
9 Providing and Fixing 15 mm nominal bore CP Brass short body bib cock complete including cutting and making
required.
(Ref. DAR 2016 VOL - II Ref No:18.49 Page No: 1258).
10 Providing and Fixing 15 mm nominal bore CP Brass long body bib cock complete including cutting and making
required (Ref. DAR 2016 VOL - II Ref No:18.51 Page No: 1259).
11 Providing and Fixing CP Towel Rail fixed to PVC cleats with C.P. brass screws including cutting and making go
required (Kohler "K-5630IN-CP" or Approved Equivalent)
(Ref. DAR 2016 VOL - II Ref No:17.73 Page No: 1112).
LABOUR
Carpenter 2nd class Day 0.17
Beldar Day 0.17
Total - B
Add GST on ITC % 18%
Total C
Total - A+B+C
Add 1% Water Charges % 1%
12 Providing and Fixing C.P. brass towel ring "Round" fixed to PVC cleats with C.P. brass screws including cutti
walls wherever required
(Ref. DAR 2016 VOL - II Ref No:17.72 Page No: 1112).
13 Providing and fixing SS liquid soap dispenser with push lever assembly with soap refill fixed in wall with Screws
per direction of the engineer-in-charge (Kohler K-10712D-CP or Approved equivalent)
(Ref. DAR 2016 VOL - II Ref No:18.65 Page No: 1272).
15 Providing and fixing C.P. brass angle valve quarter turn of approved quality conforming to IS:8931
15mm nominal bore (Ref. DAR 2016 VOL - II Ref No:18.53.1 Page No: 1259).
C LABOUR
Carpenter 2nd class Day 0.12
Beldar Day 0.12
17 Providing and fixing S.S. body tissue paper dispenser complete including cutting and making good the walls wh
(Ref. DAR 2016 VOL - II Ref No:17.34.1 Page No: 1259).
LABOUR
Carpenter 2nd class Day 0.12
Beldar Day 0.12
18 Providing and fixing Health faucet with 1 metre long Flexible Tube and CP wall hook with PVC & SS Screws inc
good the wall wherever required complete as directed by the Engineer-in-charge (Ref. DAR 2016 VOL - II Ref N
1093)
19 Providing and fixing C.P Single lever concealed diverter for bath and shower with Button at Top complete a
charge (Ref. DAR 2016 VOL - II Ref No:18.64 Page No: 1272)...
S.No./ Description
Code Unit Quantity
A MATERIALS
Price of CP Single lever concealed divertor Each 1
Less: Discount % 10%
Total - A
GST % 18%
Pluming Rate Analysis
Total
9999 Carraige of material and fixing charges LS 6.76
Total - B
Total - A+B
Add 1% Water Charges % 1%
LABOUR
Carpenter 2nd class Day 0.17
Beldar Day 0.17
24 Providing and Fixing CP Hinged Arms (Sliding rail) for Handicapped Toilet with SS Screws over Rawl Plugs com
of the engineer-in-charge (Ref. DAR 2016 VOL - II Ref No:17.73 Page No: 1155).... .
LABOUR
Carpenter 2nd class Day 0.17
Beldar Day 0.17
25 Providing and Fixing straight / offset type flexible single body push fit type WC pan connector with factory suppl
integral Single mould sealing fins made of flexible EVA body, including bush / adaptor for use with C.I. Pipe as s
site)
LABOUR
Installation Each 1.00
Total - B
Add GST on ITC % 18%
Total - B+C
Total - A+B+C
Add 1% Water Charges % 1%
26 Providing and fixing C.P cast brass Double coat hook fixed to PVC cleats with C.P. brass screws complete as p
engineer-in-charge (Ref. DAR 2016 VOL - II Ref No:17.73.1 Page No: 1155)
LABOUR
Carpenter 2nd class Day 0.17
Beldar Day 0.17
Total - C
Add GST on ITC % 18%
Total C
Total - A+B+C
Add 1% Water Charges % 1%
28 Providing and Fixing central hole C.P. brass Sink Mixer including cutting and making good the walls wherever re
respects as per direction of the Engineer-in-charge (Kohler Cat No: K-37315IN-4-CP or Approved equivalent).
(Ref. DAR 2016 VOL - II Ref No:18.49 Page No: 1258).
30 Providing and Fixing C.P brass Aerosol perfume dispenser, fixed to wooden cleats / Rawl Plug with C.P brass s
cutting and making good the walls wherever required (As observed at site)
S.No./ Description
Code Unit Quantity
Basic cost of M.S. Pipe 200 mm dia
Unit Qty
Detail cost of M.S. Pipe Meter 11.50
Less: Discount % 0%
Total
GST % 18%
II 15 Providing and Fixing G.I. Reducing elbow of 100 x 50 mm in cement concrete 1:2:4 at all levels for floor drains
for connection to floor traps in sunken portions, complete as per drawings and as per approval of the engineer-
INSTALLATION
Total B
Total A + B
GST % 18%
Total A + B+C
Add 1% Water Charges % 1%
II 19 Providing and fixing G.I. Inlet fittings with maximum 3 inlets 32,40 & 50 mm size fabricated from 100 mm dia G.
sockets, fixed to C.I. Trap and set in cement concrete as per drawing (Based on actual observation).
Total A1+A2
Rate of cartage of material % 1%
Total B
Total A+B
Labour:
Labour Fabrication Each 1.0
Installation charges Each 1.0
GST % 18%
Total C
Total A+B+C
Add 1% Water Charges % 1%
II 20 Providing and Fixing SS Grating with frame and SS Screws casted heavy 125 mm dia complete as directed by
DAR 2016 VOL - II Ref No:18.58.1 Page No: 1263)..
Pluming Rate Analysis
Details of cost for one no
S.No./ Description
Code Unit Quantity
Price of SS grating Each 1
Less: Discount % 25%
Total A1
GST % 18%
Labour:
Labour Fabrication Each 1.0
Installation charges Each 1.0
GST % 18%
Total B
Total A+ B
Add 1% Water Charges % 1%
II 21 Providing and Fixing Dome Grating for roof rain water pipe with all required accessories complete as directed b
(Ref. DAR 2016 VOL - II Ref No:18.58.1 Page No: 1263)..
S.No./ Description
Code Unit Quantity
Price of Dome Grating 300 mm dia Each 1
Less: Discount % 25%
Total - A
Pluming Rate Analysis
GST % 18%
II 22 Providing and fixing cast brass cleanout plug with suitable insert keys for opening, male threaded joint
caulked to spun soil pipe including cost of joint etc.complete (Based on actual observation)
Total - A1+A2
Rate of cartage of material % 1%
Total - B
Total - A+B
C) Labour
Installation Each 1.00
GST % 18%
Total C
Total - A+B+C
Add 1% Water Charges % 1%
Total - A1+A2
Rate of cartage of material % 1%
Total - B
Total - A+B
C) Labour
Installation Each 1.00
GST % 18%
Total C
Total - A+B+C
Add 1% Water Charges % 1%
II 24 Providing and fixing cast iron soil, waste and vent pipes as per IS:15905 (Hubless pipes) including all fittings w
any degree i.e bends, junctions, branches, end caps, reducers, cowls, offsets, access pieces, G.I. holder bats a
and jointing with stainless steel 304 couplings with EPDM rubber gasket, including cutting holes in walls and flo
same wherever required, all structural supports as per approved specifications, complete, as per instructions of
(Ref. DAR 2016 VOL - II Ref No:17.35.1.3 Page No: 297)...
C) Labour:
i) Fitter Grade I Day 0.42
ii) Beldar Day 0.21
iii) Bandhani Day 0.83
Total - C
GST % 18%
Total - A+B
Add 1% Water Charges % 1%
Pluming Rate Analysis
II 25 Providing & laying cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 stone aggregate 20mm and down g
pipe.
For 150, 100mm, 75mm and 50mm dia pipes under floor including centering & shuttering wherever required.
2 Providing and fixing G.I. Class "C" Pipe complete with G.I. Fittings and clamps, including cutting and making g
work)
Exposed on wall
a) 25 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (Page-934, item no-18.10.4)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
(A) 25 mm dia G.I. Pipe
A1 Metre 11.50
Added 15% for fittings and wastage on (A )
Less : Discount % 10%
Total A1
Add GST % 18%
Total
2271 1.15 * 31.70 = 36.455 kg = 0.036455 tonne
Carriage of G.I. pipes below 100 mm dia Tonne 0.036455
Total A2
Total A=A1+A2
White lead, hemp, oil etc. L.S. 9.49
Cement, sand and grit etc. L.S. 4.16
Total B
Total A+B
C) LABOUR
Fitter Day 0.33
Pluming Rate Analysis
Asstt. Fitter Day 0.98
Beldar Day 0.98
Total C
Add GST on ITC % 18%
Total
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
b) 32 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (Page-934, item no-18.10.4)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
(A) 32 mm dia G.I. Pipe
A1 Metre 11.50
Added 15% for fittings and wastage on (A )
Less : Discount % 10%
Total A1
Add GST % 18%
Total
2271 1.15 * 31.70 = 36.455 kg = 0.036455 tonne
Carriage of G.I. pipes below 100 mm dia Tonne 0.036455
Total A2
Total A=A1+A2
White lead, hemp, oil etc. L.S. 9.49
Cement, sand and grit etc. L.S. 4.16
Total B
Total A+B
C) LABOUR
Fitter Day 0.33
Asstt. Fitter Day 0.98
Beldar Day 0.98
Total C
Add GST on ITC % 18%
Total
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
c) 40 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (Page-934, Item no-18.10.5)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
Pluming Rate Analysis
A MATERIALS
(A) 40 mm dia G.I. Pipe
A1 Metre 11.50
Added 15% for fittings and wastage on (A )
Less : Discount % 10%
Total A1
Add GST % 18%
Total
2271 1.15 * 36.50 = 41.975 kg = 0.041975 tonne
Carriage of G.I. pipes below 100 mm dia Tonne 0.041975
Total A2
Total A1+A2
White lead, hemp, oil etc. L.S. 13.52
Cement, sand and grit etc. L.S. 5.33
Total B
Total A+B
B) LABOUR
Fitter Day 0.33
Asstt. Fitter Day 1.31
Beldar Day 1.31
Total B
Add GST on ITC % 18%
Total
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
d) 50 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (Page-934, item no-18.10.6)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
(A) 50 mm dia G.I. Pipe
A1 Metre 11.50
Added 15% for fittings and wastage on (A )
Less : Discount % 10%
Total A1
Add GST % 18%
Total
2271 1.15 * 51.70 = 59.455 kg = 0.059455 tonne
Tonne 0.059455
Carriage of G.I. pipes below 100 mm dia
Total A2
Total A1+A2
White lead, hemp, oil etc. L.S. 13.52
Cement, sand and grit etc. L.S. 5.33
Total B
Total A+B
C)LABOUR
Fitter Day 0.33
Asstt. Fitter Day 1.64
Beldar Day 1.64
Pluming Rate Analysis
Total C
Add GST on ITC % 18%
Total
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
e) 65 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (Page-934, item no-18.10.6)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
(A) 65 mm dia G.I. Pipe
A1 Metre 11.50
Added 15% for fittings and wastage on (A )
Less : Discount % 10%
Total A1
Add GST % 18%
Total
2271 1.02 * 66.30 = 67.626 kg = 0.067626 tonne
Tonne 0.067626
Carriage of G.I. pipes below 100 mm dia
Total A2
Total A1+A2
White lead, hemp, oil etc. L.S. 13.52
Cement, sand and grit etc. L.S. 5.33
Total B
Total A+B
C)LABOUR
Fitter Day 0.33
Asstt. Fitter Day 1.64
Beldar Day 1.64
Total C
Add GST on ITC % 18%
Total
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
f) 80 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (page-934, item no-18.10.6)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
(A) 80 mm dia G.I. Pipe
A1 Metre 11.50
Added 15% for fittings and wastage on (A )
Pluming Rate Analysis
Less : Discount % 10%
Total A1
Add GST % 18%
Total
C)LABOUR
Fitter Day 0.33
Asstt. Fitter Day 1.64
Beldar Day 1.64
Total C
Add GST on ITC % 18%
Pluming Rate Analysis
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
3 Providing and fixing G.I pipes Class "C" complete with G.I fittings including trenching and refilling etc. (External
3a) 50 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (Page-1189, item no-18.12.6)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
MATERIALS
(A) 50 mm dia G.I. Pipe
A Metre 10.20
Added 2% for fittings and wastage on (A )
Less : Discount % 10%
Pluming Rate Analysis
Total A1
Add GST % 18%
Total
2271 1.02 * 51.70 = 52.73 kg = 0.05273 tonne
Carriage of G.I. pipes below 100 mm dia Tonne 0.052734
Total A2
Total A1+A2
Total A2
Total A1+A2
White lead, hemp, oil etc. L.S. 13.52
Total B
Total A+B
C)LABOUR
Fitter Grade 1 Day 0.25
Beldar Day 0.66
Trenching and Refiling
Beldar Day 0.66
Coolie Day 0.66
Total C
Pluming Rate Analysis
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
Total A2
Total A1+A2
White lead, hemp, oil etc. L.S. 13.52
Total B
Total A+B
C)LABOUR
Fitter Grade 1 Day 0.25
Beldar Day 0.66
Trenching and Refiling
Beldar Day 0.66
Coolie Day 0.66
Total C
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
Total A2
Total A1+A2
White lead, hemp, oil etc. L.S. 13.52
Total B
Total A+B
C)LABOUR
Fitter Grade 1 Day 0.25
Beldar Day 0.66
Trenching and Refiling
Beldar Day 0.66
Coolie Day 0.66
Total C
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water
plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pip
CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints co
Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
e) 40 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (Page-1177, Item no-18.8.4)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
Rate of Chlorinated Polyvinyl - chloride (CPVC) pipe 40
Metre 10.00
mm outer dia.
Less : Discount % 40%
Total A
Add GST % 18%
Total
Add 75% fittings, clamps and wastage
etc. on (X)
75 * X / 100
Pluming Rate Analysis
Making chases upto 7.5 x 7.5 cm. in walls and making
good the same
Rate as per item no. 18.78 Of SH: Water Supply
Metre 10
Total B
Total A+B
C)Labour
Fitter Grade 1 Day 0.33
Assistant fitter 2nd class fitter Day 0.66
Beldar Day 0.66
Total C
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
f) 50 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.8.4)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
Rate of Chlorinated Polyvinyl - chloride (CPVC) pipe 50
Metre 10.00
mm outer dia.
Less : Discount % 40%
Total
Add GST % 18%
Total
Add 75% fittings, clamps and wastage
etc. on (X)
75 * X / 100
C)Labour
Fitter Grade 1 Day 0.33
Assistant fitter 2nd class fitter Day 0.66
Beldar Day 0.66
Total C
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Pluming Rate Analysis
Cost for 10 metre
Cost for 1 metre
Say Rs.
g) 65 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.8.4)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
MATERIALS
Rate of Chlorinated Polyvinyl - chloride (CPVC) pipe 65
Metre 10.00
mm outer dia.
Less : Discount % 40%
Total
Add GST % 18%
Total
Add 75% fittings, clamps and wastage
etc. on (X)
75 * X / 100
Making chases upto 7.5 x 7.5 cm. in walls
and making good the same
Making chases upto 7.5 x 7.5 cm. in walls
and making good the same
Rate as per item no. 18.78 Of SH: Water Supply Metre 10
Total
Total A+B
Labour
Fitter Grade 1 Day 0.33
Assistant fitter 2nd class fitter Day 0.66
Beldar Day 0.66
Total B
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
5 Providing and fixing Stainless Steel pipes (Grade SS-316) confirming to JIS 3448 standard complete with P
Contur in accordance with DVGW regulation W534 such as sockets, bends, elbows, tees, reducers, unions,
steel supports,hangers etc. necessary adapters for GI to SS / other metals and for connections to CP fittings
holes in walls/floors/slabs & making good, complete in all respects.
a) 22 mm OD
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.85.2)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
Rate of SS 316 pipe 22 mm outer dia. Metre 10.00
Less : Discount % 10%
Total
Pluming Rate Analysis
Add GST % 18%
Total
Add 3% of Fitting & Wastage
Add 2% of T & P and sundries etc.
Total A1
b) 35 mm OD
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.85.4)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
MATERIALS
Rate of SS 316 pipe 35 mm outer dia. Metre 10.00
Less : Discount % 10%
Total
Add GST % 18%
Total
Add 3% of Fitting & Wastage
Add 2% of T & P and sundries etc.
Total A1
c) 42 mm OD
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.85.5)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
MATERIALS
Rate of SS 316 pipe 42 mm outer dia. Metre 10.00
Less : Discount % 10%
Total
Add GST % 18%
Total
Add 3% of Fitting & Wastage
Add 2% of T & P and sundries etc.
Total A1
d) 54 mm OD
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.85.5)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
Rate of SS 316 pipe 54 mm outer dia. Metre 10.00
Less : Discount % 10%
Pluming Rate Analysis
Total
Add GST % 18%
Total
Add 3% of Fitting & Wastage
Add 2% of T & P and sundries etc.
Total A1
e) 75 mm OD
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.85.5)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
Rate of SS 316 pipe 75 mm outer dia. Metre 10.00
Less : Discount % 10%
Total
Add GST % 18%
Total
Add 3% of Fitting & Wastage
Add 2% of T & P and sundries etc.
Total A1
f) 90 mm OD
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.85.5)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
MATERIALS
Rate of SS 316 pipe 90 mm outer dia. Metre 10.00
Less : Discount % 10%
Total
Add GST % 18%
Total
Add 3% of Fitting & Wastage
Add 2% of T & P and sundries etc.
Total A1
9 Providing and fixing G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc
B)LABOUR
Fitter Grade 1 Day 0.15
Beldar Day 0.15
Total B
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 1 Nos.
Say Rs.
LABOUR
Fitter Grade 1 Day 0.15
Beldar Day 0.15
Total B
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 1 Nos.
Say Rs.
Pluming Rate Analysis
22 Providing and fixing forged brass lever operated ball valve of full flow with forged brass ball (Machined to mir
chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 10 k
respect.
23 Providing and fixing C.I. butterfly valves of approved make , wafer end type class PN 1.6 as per I.S:13095 or wi
linear of nitrile or EPDM, SS Disc and steam lever operated including necessary nuts, bolts, gaskets, flanges et
by Engineer-in-charge.
30 Providing and Fixing Pressure Reducing station for cold water supply comprising of 2 Nos. of brass ball valves
and ball valve with inbuilt strainers and a PRV (Diaphram type) unit with out going pressure gauge with flanged
including safety valve. The complete system is tested to a pressure not less than 15 Kg/Cm2 and suitable to red
3.5 Kg/Cm2 to 1.0 Kg/Cm2(or as desired at site) including flanges/unions, nuts, bolts and washers complete as
(Horizontal or vertical as applicable). (As observed at site).
12.26 Providing and Laying uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all fittings e.g. bends, junctions, elbo
access pieces etc. jointing with solvent cement complete. Rates includes any type of fittings required for the pro
point in main ring of the Hydrant pipe in different location complete in with trenching, refilling and testing of joint
direction of the engineer in charge (Refer CPWD AOR 2016 VOL -I 12.41.1 Page No. 735)
34 Providing and fixing thermal insulation over hot water pipes in chase having Red Oxide Primer Coat with 6mm
or approved equivalent thermal insulation tubing, a elastomeric flexible material having hermetic blister closed c
synthetic rubber having density of 60-90 Kg/m3 over pipes of following sizes including all required accessories
Manufactuer's specifications and finishing it as per site requirement with Cement Plaster of 1:3 (1 Cement: 3 Co
at site)
35 Providing and fixing 750 mm long hot dipped G.I. Puddle flanges for water tanks as per I.S. 1239 (Class C) with
suitable size and welded alround the pipe fixed in walls, beams and top slab of R.C.C tanks, complete with all d
as per drawing (As observed at site).
37 Providing & fixing butterfly valve (with motorized actuator) of rating PN 1.6, wafer type, in cast iron body with Du
seal, SS single piece shaft, conforming to IS-13095 of the following sizes complete with cast iron hand level com
nuts, washers & inserted rubber gaskets, as required and as per enclosed specification, with single phase Elec
400Nm Torque, made of aluminium alloy (resistant to heat, acid , alkali, corrosion), and weather proof heavy du
start speed to effectively avoid water hammering, with waterproofing seal (IP 67) for all housing seals, low noise
protection complete as per approved type and specifications as per instructions of the engineer - in - charge.
IV 4.0 Providing and laying non-pressure NP3 class socketed R.C.C. pipes (medium duty) jointed with EPDM gasket
testing of joints and checking and making good leakages wherever required complete as per directions of the e
DAR 2016 VOL - II Ref No:19.6 Page No: 1218)..
IV 6.0 Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nomi
S.W/RCC/HDPE. pipes including bed concrete as per standard design:
Cu.M. 1.90
Detail cost for 10 Metre
Detail cost for 1 Metre
Cu.M. 2.20
Detail cost for 10 Metre
Detail cost for 1 Metre
Cu.M. 2.50
Detail cost for 10 Metre
Detail cost for 1 Metre
Cu.M. 3.00
Detail cost for 10 Metre
Detail cost for 1 Metre
Cu.M. 3.33
Detail cost for 10 Metre
Detail cost for 1 Metre
Cu.M. 3.50
Detail cost for 10 Metre
Detail cost for 1 Metre
Cu.M. 3.90
Detail cost for 10 Metre
Detail cost for 1 Metre
Cu.M. 4.30
Detail cost for 10 Metre
Detail cost for 1 Metre
IV 7.0 Providing and laying of High density Polythene (HDPE Pipes) material grade PE - 80, working pressure rating P
permissible working pressure) confirming IS - 14333 jointed by Butt welding method including testing of joints e
2016 VOL - II Ref No:19.6 Page No: 1218)..
Fittings and Wastage (@30% as per DAR 2010 for PPR &
CPVC Pipes)
Total A2
Total A1+A2
Carraige of material % 1%
Total A2
Total A1+A2
Cement, sand and grit etc. LS 5.33
Pluming Rate Analysis
Total B
Total A+B
C)Labour:
i) Fitter Grade I Day 0.33
ii) Fitter Grade II Day 1.31
iii) Beldar Day 1.31
Total
GST ON ITC % 18%
Total C
Total A+B+C
Add 1% Water Charges % 1%
Fittings and Wastage (@30% as per DAR 2010 for PPR &
CPVC Pipes)
Total A2
Total A1+A2
Carraige of material % 1%
Total A2
Total A1+A2
Cement, sand and grit etc. LS 5.33
Total B
Total A+B
C)Labour:
i) Fitter Grade I Day 0.33
ii) Fitter Grade II Day 1.31
iii) Beldar Day 1.31
Total
GST ON ITC % 18%
Total C
Total A+B+C
Add 1% Water Charges % 1%
Fittings and Wastage (@30% as per DAR 2010 for PPR &
CPVC Pipes)
Total A2
Total A1+A2
Carraige of material % 1%
Total A2
Total A1+A2
Cement, sand and grit etc. LS 5.33
Total B
Total A+B
C)Labour:
i) Fitter Grade I Day 0.33
ii) Fitter Grade II Day 1.31
iii) Beldar Day 1.31
Total
GST ON ITC % 18%
Total C
Total A+B+C
Add 1% Water Charges % 1%
Fittings and Wastage (@30% as per DAR 2010 for PPR &
CPVC Pipes)
Total A2
Total A1+A2
Carraige of material % 1%
Pluming Rate Analysis
Total A2
Total A1+A2
Cement, sand and grit etc. LS 5.33
Total B
Total A+B
C)Labour:
i) Fitter Grade I Day 0.33
ii) Fitter Grade II Day 1.31
iii) Beldar Day 1.31
Total
GST ON ITC % 18%
Total C
Total A+B+C
Add 1% Water Charges % 1%
Fittings and Wastage (@30% as per DAR 2010 for PPR &
CPVC Pipes)
Total A2
Total A1+A2
Carraige of material % 1%
Total A2
Total A1+A2
Cement, sand and grit etc. LS 5.33
Total B
Total A+B
C)Labour:
i) Fitter Grade I Day 0.33
ii) Fitter Grade II Day 1.31
iii) Beldar Day 1.31
Total
GST ON ITC % 18%
Total C
Total A+B+C
Add 1% Water Charges % 1%
Pluming Rate Analysis
Add 15 % Contractor's profit and overheads % 15%
Fittings and Wastage (@30% as per DAR 2010 for PPR &
CPVC Pipes)
Total A2
Total A1+A2
Carraige of material % 1%
Total A2
Total A1+A2
Cement, sand and grit etc. LS 5.33
Total B
Total A+B
C)Labour:
i) Fitter Grade I Day 0.33
ii) Fitter Grade II Day 1.31
iii) Beldar Day 1.31
Total
GST ON ITC % 18%
Total C
Total A+B+C
Add 1% Water Charges % 1%
Total A2
Total A1+A2
Carraige of material % 1%
Total A2
Total A1+A2
Cement, sand and grit etc. LS 5.33
Total B
Total A+B
C)Labour:
i) Fitter Grade I Day 0.33
ii) Fitter Grade II Day 1.31
iii) Beldar Day 1.31
Total
GST ON ITC % 18%
Total C
Total A+B+C
Add 1% Water Charges % 1%
24.00 Construction of Grease trap of size 2 m x1 m (Internal) with effective depth of 1 m with Brick Masonry in Ceme
Coarse sand) over a bed of 150 mm thick PCC 1:5:10 (1 Cement: 5 Coarse sand: 10 graded stone aggregate 4
including a baffle wall of Brick work, covered with RCC slab of 150 mm thickness, of 1:2:4 mix (1 Cement: 2 Co
aggregate of 20 mm nominal size) including centering, shuttering and reinforcement complete with providing an
mm C to C with Two 600x600 mm D.I. Manhole Covers with Lifting arrangement, including 150 mm dia Inlet & O
Cum 2
2.26.1 Extra or additional lift Cum 7.56
18.27.3 Providing and Fixing in position 150 mm dia inlet and outlet
CILA pipes
RM 10
18.28.3 Lead joint 150 mm Each 8
18.29 Supplying of Pig lead at site of work Quintal 0.5
18.25 Supplying heavy duty fittings Quintal 0.5
17.35.2.2 Providing and Fixing in position 75 mm dia SCI Vent pipe
RM 10
17.56.2.2 Terminal Guard 75 mm dia Each 1
19.16 Supply and Fixing of PVC Encapsulated Foot rest
Each 16
17.58.2 Lead caulked joint 75 mm dia Each 6
Supply and Fixing of 600x600 mm dia M.H. Cover D.I.
Heavy duty (C-250, HD) Each 2
Carraige of material % 1%
Total A2
Total A1+A2
B) Labour (5%)
Total B
GST ON ITC % 18%
Total B+C
Total A+B+C
Add 1% Water Charges % 1%
26 Providing and Fixiing extra medium duty, water tight double sealed Ductile iron 560 mm dia. Circular Manhole c
casted for placing over the OH Water tanks with lifting and locking arrangements as per approved sample, com
including fixing in PCC as per site Requirement .
C)Labour:
Installation % 5%
Total C
GST ON ITC % 18%
Total B+C
Total A+B+C
Add 1% Water Charges % 1%
27 Providing and fixing M.S. grating and preferably in 600mm long pieces, fabricated with 16x16mm square bars
and welded to angle iron 25x25x5mm and placed firmly on angle iron frame of 30x30x5mm with 25x3mm hold
75mm long welded at intervals of 500mm including two or more coats of synthetic enamel paint of approved q
coats of primer and set in cement mortar 1:3 (1 cement : 3 coarse sand) complete as per attached details fo
B)Labour:
Fitter 2nd class Day 0.10
Beldar Day 0.10
GST % 18%
Total C
Total A+B+C
Add 1% Water Charges % 1%
VI 18 Construction of brick masonry desilting chamber of size 200x100x60cm (effective depth) before rainy well wi
bricks in cement mortar 1:4 (1 cement : 4 coarse sand) , foundation concrete 1:4:8 mix (1 cement : 4 coarse san
aggregate 40mm nominal size), inside and outside plastering 12mm thick with cement mortar 1:3 (1 cement : 3
with a floating coat of neat cement inside and rough plaster on outside, including fixing of grating , neatly finish
respects including neccessary excavation, refilling and disposal of surplus earth, complete as per attached Ske
2 Nos. SFRC Manhole cover 560 mm dia Extra heavy duty Each 4
(EHD 35) = 4X1655.20 (19.19.4.1)
Total
Say Rs.
Pluming Rate Analysis
e 75x50 cm deep and 1.8 cm thick, fixed in urinal
e stone in the chase with epoxy grout or with
ominal size) as per direction of Engineer-in-charge
Rate Amount
Hindware Enigma slim
8910.00 8910.00
8910.00
4009.50
4900.50
882.09
5782.59
1.73 16.94
16.94
5799.53
710.00 710.00
710.00 710.00
536.00 536.00
1956.00
352.08
2308.08
8107.61
81.08
8188.68
1228.30
9416.99
94.17
9511.16
Say Rs. 9511.00
Rate Amount
Jaquar JCS-WHT-2400S
5180.00 5180.00
5180.00
518.00
4662.00
839.16
5501.16
1.73 16.94
16.94
5518.10
Pluming Rate Analysis
710.00 710.00
710.00 710.00
536.00 536.00
1956.00
352.08
2308.08
7826.18
78.26
7904.44
1185.67
9090.10
90.90
9181.01
Say Rs. 9181.00
ng, specially fabricated brackets painted white and
on complete, including cutting and making good the
Rate Amount
Jaquar
1790.00 1790.00
1790.00
179.00
1611.00
289.98
1900.98
80.00 80.00
65.00 65.00
1.73 27.89
1.73 23.16
1.73 46.55
1.73 23.39
266.00
2166.98
710.00 234.30
710.00 234.30
536.00 337.68
806.28
145.13
951.41
3118.39
31.18
3149.57
472.44
3622.01
36.22
3658.23
Say Rs. 3658.00
Pluming Rate Analysis
lt in spreaders with inbuilt waste with C.P flange,
d (Ref. DAR 2016 VOL - II Ref No:17.80 Page No:
Rate Amount
Jaquar
6250.00 6250.00
6250.00
625.00
5625.00
1012.50
6637.50
1.73 16.94
16.94
6654.44
710.00 355.00
536.00 268.00
623.00
112.14
735.14
7389.58
73.90
7463.47
1119.52
8582.99
85.83
8668.82
Say Rs. 8669.00
for urinals, including front S.S plate 125 x 125mm
utting and making good the walls wherever required
Rate Amount
Jaquar
6960.00 6960.00
6960.00
696.00
6264.00
1127.52
7391.52
1.73 16.94
16.94
7408.46
710.00 355.00
536.00 268.00
623.00
112.14
735.14
Pluming Rate Analysis
8143.60
81.44
8225.03
1233.75
9458.79
94.59
9553.38
Say Rs. 9553.38
Rate Amount
NeelKanth
11180.00 11180.00
5590.00
5590.00
1006.20
6596.20
65.00 130.00
1.73 46.78
1.73 46.55
223.33
6819.53
710.00 156.20
710.00 426.00
536.00 439.52
1021.72
183.91
1205.63
8025.16
80.25
8105.41
1215.81
9321.23
93.21
9414.44
9414.44
SAY Rs. 9414.44
Rate Amount
Hindware
690.00 690.00
276.00
Pluming Rate Analysis
414.00
74.52
488.52
1.73 20.02
20.02
508.54
5.09
513.62
77.04
590.66
5.91
596.57
596.57
SAY Rs. 596.57
Rate Amount
960.00 960.00
96.00
864.00
155.52
1019.52
1.73 24.06
24.06
1043.58
10.44
1054.02
158.10
1212.12
12.12
1224.24
1224.24
SAY Rs. 1224.24
Rate Amount
1045.00 1045.00
418.00
627.00
112.86
739.86
21.85 43.70
Pluming Rate Analysis
190.00 11.40
1.73 7.20
62.30
802.16
653.00 111.01
536.00 91.12
202.13
36.38
238.51
1040.67
10.41
1051.08
157.66
1208.74
12.09
1220.83
1220.83
SAY Rs. 1220.83
Rate Amount
Jaquar
740.00 740.00
74.00
666.00
119.88
785.88
1.73 35.08
35.08
820.96
8.21
829.17
124.38
953.55
9.54
963.09
SAY Rs. 963.09
Rate Amount
Jaquar
2300.00 2300.00
230.00
Pluming Rate Analysis
2070.00
372.60
2442.60
1.73 11.69
11.69
2454.29
24.54
2478.84
371.83
2850.66
28.51
2879.17
as per the direction of Engineerin- charge.
Rate Amount
Hindware
1150.00 1150.00
460.00
690.00
124.20
814.20
1.73 34.60
34.60
848.80
8.49
857.29
128.59
985.88
9.86
995.74
SAY Rs. 995.74
ng to IS:8931
Rate Amount
Jaquar
890.00 890.00
89.00
801.00
144.18
945.18
1.73 19.57
19.57
964.75
9.65
974.39
146.16
1120.55
11.21
1131.76
SAY Rs. 1131.76
Pluming Rate Analysis
walls wherever required (Ref. DAR 2016 VOL - II
Rate Amount
Dolphy
469.00 469.00
0.00
469.00
84.42
553.42
1.73 7.42
7.42
560.84
21.85 43.70
190.00 0.04
1.73 7.42
51.16
612.00
653.00 78.36
536.00 64.32
142.68
25.68
168.36
780.36
7.80
788.17
118.23
906.39
9.06
915.46
SAY Rs. 915.46
making good the walls wherever required
Rate Amount
Kohler 5633IN-CP
1320.00 1320.00
382.80
937.20
168.70
1105.90
1.73 7.42
7.42
1113.32
Pluming Rate Analysis
21.85 43.70
190.00 0.04
43.74
1157.06
653.00 78.36
536.00 64.32
142.68
25.68
168.36
1325.42
13.25
1338.67
200.80
1539.47
15.39
1554.87
SAY Rs. 1554.87
with PVC & SS Screws including cutting and making
. DAR 2016 VOL - II Ref No:17.16A Page No:
Rate Amount
Hindware F160068
970.00 970.00
388.00
582.00
104.76
686.76
1.73 19.38
19.38
706.14
7.06
713.20
106.98
820.18
8.20
828.38
SAY Rs. 828.38
Button at Top complete as directed by Engineer-in-
Rate Amount
3170.00 3170.00
317.00
2853.00
513.54
Pluming Rate Analysis
3366.54
1.73 11.69
11.69
3378.23
33.78
3412.02
511.80
3923.82
39.24
3963.06
Say Rs. 3963.06
Hindware F160039
Rate Amount
790.00 790.00
316.00
474.00
85.32
559.32
1.73 11.69
11.69
571.01
5.71
576.72
86.51
663.23
6.63
669.87
Say Rs. 669.87
er-in-charge (Ref. DAR 2016 VOL - II Ref No:18.64
Rate Amount
Jaquar SPJ-CHR-429
910.00 910.00
91.00
819.00
147.42
966.42
1.73 11.69
11.69
978.11
9.78
987.90
148.18
1136.08
11.36
1147.44
Pluming Rate Analysis
Say Rs. 1147.44
plete for Handicapped Toilet as directed by
Rate Amount
Jaquar AHS-CHR-1507
1240.00 1240.00
124.00
1116.00
200.88
1316.88
1.73 7.20
7.20
1324.08
21.85 43.70
190.00 11.40
55.10
1379.18
653.00 111.01
536.00 91.12
202.13
36.38
238.51
1617.69
16.18
1633.87
245.08
1878.95
18.79
1897.74
SAY Rs. 1897.74
rews over Rawl Plugs complete as per instructions
.
Rate Amount
6565.00 6565.00
1313.00
5252.00
945.36
6197.36
1.73 7.20
7.20
6204.56
Pluming Rate Analysis
21.85 43.70
190.00 11.40
55.10
6259.66
653.00 111.01
536.00 91.12
202.13
36.38
238.51
6498.17
64.98
6563.15
984.47
7547.62
75.48
7623.10
SAY Rs. 7623.10
nnector with factory supplied seal guard with
for use with C.I. Pipe as supplied (As observed at
Geberit
Rate Amount
1080.00 1080.00
0.00
1080.00
194.40
1274.40
12.74
12.74
1287.14
50.00 50.00
50.00
9.00
59.00
1346.14
13.46
1359.61
203.94
1563.55
15.64
1579.18
SAY Rs. 1579.18
rass screws complete as per instructions of the
Rate Amount
390.00 390.00
156.00
234.00
42.12
276.12
1.73 7.20
7.20
283.32
21.85 43.70
190.00 11.40
55.10
338.42
653.00 111.01
536.00 91.12
202.13
36.38
238.51
576.93
5.77
582.70
87.40
670.10
6.70
676.81
SAY Rs. 676.81
good the walls wherever required complete in all
or Approved equivalent).
Jaquar SOL-CHR-6309
Rate Amount
3050.00 3050.00
305.00
2745.00
494.10
3239.10
1.73 20.02
20.02
3259.12
32.59
3291.71
493.76
3785.46
37.85
3823.32
SAY Rs. 3823.32
Pluming Rate Analysis
in all respect including basin mounted auto tap,
cessary accessories including cutting and making
ake or equivalent (Kohler Cat No: K-18057IN-ND-
Jaquar SNR-CHR-51021
Rate Amount
7670.00 7670.00
1534.00
6136.00
1104.48
7240.48
1.73 20.02
20.02
7260.50
72.60
7333.10
1099.97
8433.07
84.33
8517.40
SAY Rs. 8517.40
awl Plug with C.P brass screws, complete including
EURONICS EA03
Rate Amount
1400.00 1400.00
0.00
1400.00
252.00
1652.00
16.52
16.52
1668.52
500.00 500.00
500.00
90.00
590.00
2258.52
22.59
2281.11
342.17
2623.27
26.23
2649.50
SAY Rs. 2649.50
Pluming Rate Analysis
uding cutting, welding, nut-bolts, gasket, fitting viz.
am / floor with suitable MS clamps / structural
hetic enamel paint of approved shade complete as
Rate Amount
Oriplast
1021.28 11744.72
0.00
11744.72
2114.05
13858.77
101.40 477.59
14336.36
143.36
2150.45
2293.82
16630.18
710.00 1420.00
710.00 532.50
536.00 1742.00
653.00 326.50
4021.00
723.78
4744.78
21374.96
213.75
21588.71
3238.31
24827.02
248.27
25075.29
2507.53
SAY Rs. 2507.53
Rate Amount
Oriplast
Rate Amount
1600.00 18400.00
0.00
18400.00
3312.00
21712.00
101.40 636.79
22348.79
Pluming Rate Analysis
223.49
3352.32
3575.81
25924.60
710.00 1775.00
710.00 710.00
536.00 2144.00
653.00 326.50
4955.50
891.99
5847.49
31772.09
317.72
32089.81
4813.47
36903.28
369.03
37272.31
3727.23
SAY Rs. 3727.23
Rate Amount
Oriplast
Rate Amount
2000.00 23000.00
0.00
23000.00
4140.00
27140.00
101.40 795.99
27935.99
279.36
4190.40
4469.76
32405.75
710.00 1775.00
710.00 710.00
536.00 2144.00
653.00 326.50
4955.50
891.99
5847.49
38253.24
382.53
38635.77
5795.37
44431.14
Pluming Rate Analysis
444.31
44875.45
4487.54
SAY Rs. 4487.54
Rate Amount
TATA
Rate Amount
2411.42 27731.33
0.00
27731.33
4991.64
32722.97
101.40 955.19
33678.16
336.78
5051.72
5388.51
39066.66
710.00 1775.00
710.00 710.00
536.00 2144.00
653.00 326.50
4955.50
891.99
5847.49
44914.15
449.14
45363.29
6804.49
52167.79
521.68
52689.47
5268.95
SAY Rs. 5268.95
KS Brand
Rate Amount
1160.00 1160.00
0.00
1160.00
208.80
1368.80
100.00 100.00
Pluming Rate Analysis
100.00
1468.80
100.00
100.00
1568.80
282.38
1851.18
18.51
1869.70
280.45
2150.15
21.50
2171.65
SAY Rs. 2171.65
cated from 100 mm dia G.I.pipes and welded G.I.
al observation).
Rate Amount
748.99 299.60
0.00
299.60
53.93
353.52
660.00 1320.00
501.60
818.40
147.31
965.71
1319.24
13.19
13.19
1332.43
500.00 500.00
100.00 100.00
600.00
108.00
708.00
2040.43
20.40
2060.83
309.12
2369.96
23.70
2393.66
SAY Rs. 2393.66
Rate Amount
600.00 600.00
150.00
450.00
81.00
531.00
5.31
5.31
536.31
500.00 500.00
100.00 100.00
600.00
108.00
708.00
1244.31
12.44
1256.75
188.51
1445.27
14.45
1459.72
SAY Rs. 1459.72
Rate Amount
19500.00 19500.00
4875.00
14625.00
2632.50
17257.50
1.73 7.20
7.20
17264.70
172.65
17437.34
2615.60
20052.95
200.53
20253.47
SAY Rs. 20253.47
Rate Amount
25000.00 25000.00
6250.00
18750.00
Pluming Rate Analysis
3375.00
22125.00
1.73 7.20
7.20
22132.20
221.32
22353.52
3353.03
25706.55
257.07
25963.61
SAY Rs. 25963.61
Rate Amount
590.00 590.00
147.50
442.50
79.65
522.15
660.00 660.00
250.80
409.20
73.66
482.86
1005.01
10.05
10.05
1015.06
50.00 50.00
9.00
59.00
1074.06
10.74
1084.80
162.72
1247.52
12.48
1259.99
SAY Rs. 1259.99
Rate Amount
945.00 945.00
236.25
708.75
127.58
836.33
1350.00 1350.00
513.00
Pluming Rate Analysis
837.00
150.66
987.66
1823.99
18.24
18.24
1842.22
50.00 50.00
9.00
59.00
1901.22
19.01
1920.24
288.04
2208.27
22.08
2230.36
SAY Rs. 2230.36
es) including all fittings with or without access of
s pieces, G.I. holder bats and clamps, stays, etc
utting holes in walls and floors and making good the
lete, as per instructions of the Engineer-in-charge
Rate Amount
1480.00 27439.20
8231.76
35670.96
11414.71
24256.25
4366.13
28622.38
1.73 93.11
93.11
28715.49
1.73 139.66
139.66
28855.15
710.00 298.20
536.00 112.56
593.00 492.19
902.95
162.53
1065.48
29920.63
299.21
Pluming Rate Analysis
30219.84
4532.98
34752.81
347.53
35100.34
1950.02
SAY Rs. 1950.02
gregate 20mm and down gauge) 75mm in bed and
Rate Amount
5481.95 219.28
193.95 157.10
376.38
SAY Rs. 376.38
Rate Amount
Jindal
159.84 1838.16
183.82
1654.34
297.78
1952.13
92.24 3.36
3.36
1955.49
1.73 16.42
1.73 7.20
23.61
1979.10
710.00 234.30
Pluming Rate Analysis
653.00 639.94
536.00 525.28
1399.52
251.91
1651.43
3630.54
36.31
3666.84
550.03
4216.87
42.17
4259.04
425.90
425.90
Rate Amount
Jindal
207.80 2389.70
238.97
2150.73
387.13
2537.86
92.24 3.36
3.36
2541.22
1.73 16.42
1.73 7.20
23.61
2564.84
710.00 234.30
653.00 639.94
536.00 525.28
1399.52
251.91
1651.43
4216.27
42.16
4258.43
638.77
4897.20
48.97
4946.17
494.62
494.62
Rate Amount
Pluming Rate Analysis
Jindal
245.48 2823.02
282.30
2540.72
457.33
2998.05
92.24 3.87
3.87
3001.92
1.73 23.39
1.73 9.22
32.61
3034.53
710.00 234.30
653.00 855.43
536.00 702.16
1791.89
322.54
2114.43
5148.96
51.49
5200.45
780.07
5980.52
59.81
6040.32
604.03
604.03
Rate Amount
Jindal
329.97 3794.66
379.47
3415.19
614.73
4029.92
92.24 5.48
5.48
4035.41
1.73 23.39
1.73 9.22
32.61
4068.02
710.00 234.30
653.00 1070.92
536.00 879.04
Pluming Rate Analysis
2184.26
393.17
2577.43
6645.45
66.45
6711.90
1006.78
7718.68
77.19
7795.87
779.59
780.00
Rate Amount
Jindal
424.73 4884.40
488.44
4395.96
791.27
5187.23
92.24 6.24
6.24
5193.47
1.73 23.39
1.73 9.22
32.61
5226.08
710.00 234.30
653.00 1070.92
536.00 879.04
2184.26
393.17
2577.43
7803.50
78.04
7881.54
1182.23
9063.77
90.64
9154.41
915.44
915.44
Rate Amount
Jindal
522.92 6013.58
Pluming Rate Analysis
601.36
5412.22
974.20
6386.42
92.24 8.13
8.13
6394.55
1.73 23.39
1.73 9.22
32.61
6427.16
710.00 234.30
653.00 1070.92
536.00 879.04
2184.26
393.17
2577.43
9004.59
90.05
9094.63
1364.20
10458.83
104.59
10563.42
1056.34
1056.34
Rate Amount
Jindal
748.99 8613.39
861.34
7752.05
1395.37
9147.41
92.24 15.38
15.38
9162.80
1.73 23.39
1.73 9.22
32.61
9195.41
710.00 234.30
653.00 1070.92
536.00 879.04
2184.26
393.17
Pluming Rate Analysis
2577.43
11772.83
117.73
11890.56
1783.58
13674.15
136.74
13810.89
1381.09
1381.09
Rate Amount
Jindal
1115.73 12830.90
1283.09
11547.81
2078.60
13626.41
92.24 22.59
22.59
13649.00
1.73 23.39
1.73 9.22
32.61
13681.62
710.00 234.30
653.00 1070.92
536.00 879.04
2184.26
393.17
2577.43
16259.04
162.59
16421.63
2463.24
18884.88
188.85
19073.73
1907.37
1907.37
Rate Amount
Jindal
329.97 3365.69
336.57
Pluming Rate Analysis
3029.12
545.24
3574.37
92.24 4.86
4.86
3579.23
1.73 16.42
16.42
3595.65
710.00 113.60
536.00 176.88
536.00 353.76
536.00 353.76
998.00
179.64
1177.64
4773.29
47.73
4821.02
723.15
5544.18
55.44
5599.62
559.96
559.96
Rate Amount
Jindal
424.73 4332.25
433.22
3899.02
701.82
4600.85
92.24 6.24
6.24
4607.08
1.73 23.39
23.39
4630.47
710.00 177.50
536.00 353.76
536.00 353.76
536.00 353.76
1238.78
Pluming Rate Analysis
222.98
1461.76
6092.23
60.92
6153.16
922.97
7076.13
70.76
7146.89
714.69
714.69
Rate Amount
Jindal
522.92 5333.78
533.38
4800.41
864.07
5664.48
92.24 8.13
8.13
5672.61
1.73 23.39
23.39
5696.00
710.00 177.50
536.00 353.76
536.00 353.76
536.00 353.76
1238.78
222.98
1461.76
7157.76
71.58
7229.34
1084.40
8313.74
83.14
8396.87
839.69
839.69
Rate Amount
Jindal
Pluming Rate Analysis
748.99 7639.70
763.97
6875.73
1237.63
8113.36
92.24 8.13
8.13
8121.49
1.73 23.39
23.39
8144.88
710.00 177.50
536.00 353.76
536.00 353.76
536.00 353.76
1238.78
222.98
1461.76
9606.64
96.07
9702.70
1455.41
11158.11
111.58
11269.69
1126.97
1126.97
bility for hot & cold water supply, including all CPVC
his includes jointing of pipes & fittings with one step
cluding testing of joints complete as per direction of
Oriplast
Rate Amount
295.90 2959.00
1183.60
1775.40
319.57
2094.97
1571.229
Pluming Rate Analysis
93.85 938.50
2509.73
4604.70
710.00 234.30
653.00 430.98
536.00 353.76
1019.04
183.43
1202.47
5807.17
58.07
5865.24
879.79
6745.03
67.45
6812.48
681.25
681.25
Rate Amount
Astral
503.40 5034.00
2013.60
3020.40
543.67
3564.07
2673.054
93.85 938.50
3611.55
7175.63
710.00 234.30
653.00 430.98
536.00 353.76
1019.04
183.43
1202.47
8378.09
83.78
8461.87
1269.28
9731.16
97.31
Pluming Rate Analysis
9828.47
982.85
982.85
Rate Amount
798.75 7987.50
3195.00
4792.50
862.65
5655.15
4241.36
93.85 938.50
5179.86
10835.01
710.00 234.30
653.00 430.98
536.00 353.76
1019.04
183.43
1202.47
12037.48
120.37
12157.85
1823.68
13981.53
139.82
14121.35
1412.13
1412.13
Rate Amount
575.00 5750.00
575.00
5175.00
Pluming Rate Analysis
931.50
6106.50
183.195
3.6639
6293.36
92.24 0.49
0.49
6293.85
1.73 4.72
4.72
6298.57
710.00 234.30
653.00 430.98
536.00 353.76
1019.04
183.43
1202.47
7501.04
75.01
7576.05
1136.41
8712.45
87.12
8799.58
879.96
879.96
Rate Amount
1175.00 11750.00
1175.00
10575.00
1903.50
12478.50
374.355
7.4871
12860.34
92.24 0.90
0.90
12861.25
1.73 7.20
7.20
12868.44
710.00 234.30
653.00 430.98
536.00 353.76
1019.04
183.43
Pluming Rate Analysis
1202.47
14070.91
140.71
14211.62
2131.74
16343.36
163.43
16506.80
1650.68
1650.68
Rate Amount
1420.00 14200.00
1420.00
12780.00
2300.40
15080.40
452.412
9.04824
15541.86
92.24 1.14
1.14
15543.00
1.73 9.22
9.22
15552.22
710.00 234.30
653.00 430.98
536.00 353.76
1019.04
183.43
1202.47
16754.69
167.55
16922.24
2538.34
19460.57
194.61
19655.18
1965.52
1965.52
Rate Amount
1840.00 18400.00
1840.00
Pluming Rate Analysis
16560.00
2980.80
19540.80
586.22
11.72
20138.75
92.24 1.14
1.14
20139.89
1.73 9.22
9.22
20149.11
710.00 234.30
653.00 430.98
536.00 353.76
1019.04
183.43
1202.47
21351.58
213.52
21565.10
3234.76
24799.86
248.00
25047.86
2504.79
2504.79
Rate Amount
3474.00 34740.00
3474.00
31266.00
5627.88
36893.88
1106.82
22.14
38022.83
92.24 1.14
1.14
38023.98
1.73 9.22
9.22
38033.20
710.00 234.30
653.00 430.98
536.00 353.76
1019.04
Pluming Rate Analysis
183.43
1202.47
39235.66
392.36
39628.02
5944.20
45572.22
455.72
46027.95
4602.79
4602.79
Rate Amount
4074.00 40740.00
4074.00
36666.00
6599.88
43265.88
1297.98
25.96
44589.82
92.24 1.14
1.14
44590.96
1.73 9.22
9.22
44600.18
710.00 234.30
653.00 430.98
536.00 353.76
1019.04
183.43
1202.47
45802.65
458.03
46260.67
6939.10
53199.78
532.00
53731.77
5373.18
5373.18
KS Make
Pluming Rate Analysis
Rate Amount
1570.00 1570
706.50
2276.50
409.77
2686.27
1.73 3.15
2689.42
710.00 106.5
536.00 80.4
186.90
33.64
220.54
2909.96
29.10
2939.06
440.86
3379.92
33.80
3413.72
3413.72
Unik Make
Rate Amount
4092.00 4092
1554.96
5646.96
1016.45
6663.41
1.73 3.1486
6666.56
710.00 106.5
536.00 80.4
186.90
33.64
220.54
6887.10
68.87
6955.97
1043.40
7999.37
79.99
8079.36
8079.36
Pluming Rate Analysis
ass ball (Machined to mirror smooth finsh with hard
m working pressure of 10 kg/cm2 etc. complete in all
AIP Valves
Rate Amount
315.00 315
94.50
409.50
73.71
483.21
1.73 16.42
16.42
499.63
5.00
504.62
75.69
580.32
5.80
586.12
586.12
AIP Valves
Rate Amount
432.00 432.00
129.60
561.60
101.09
662.69
1.73 16.42
16.42
679.11
6.79
685.90
102.88
788.78
7.89
796.67
796.67
AIP Valves
Rate Amount
684.00 684
205.20
Pluming Rate Analysis
889.20
160.06
1049.26
1.73 18.6667
18.67
1067.92
10.68
1078.60
161.79
1240.39
12.40
1252.80
1252.80
AIP Valves
Rate Amount
1161.00 1161
348.30
1509.30
271.67
1780.97
1.73 21.1406
21.14
1802.11
18.02
1820.14
273.02
2093.16
20.93
2114.09
2114.09
AIP Valves
Rate Amount
1638.00 1638
491.40
2129.40
383.29
2512.69
1.73 23.3896
23.39
2536.08
25.36
2561.44
384.22
2945.66
29.46
Pluming Rate Analysis
2975.12
2975.12
AIP Valves
Rate Amount
2430.00 2430
729.00
3159.00
568.62
3727.62
1.73 25.6386
25.64
3753.26
37.53
3790.79
568.62
4359.41
43.59
4403.00
4403.00
SKS Make
Rate Amount
1656.00 1656
414.00
2070.00
372.60
2442.60
24.426
2467.03
710.00 213
710.00 142
536.00 268
623.00
112.14
735.14
3202.17
32.02
3234.19
485.13
3719.32
37.19
3756.51
Pluming Rate Analysis
3756.51
SKS Make
Rate Amount
1841.00 1841
460.25
2301.25
414.23
2715.48
27.15475
2742.63
710.00 213
710.00 113.6
536.00 246.56
573.16
103.17
676.33
3418.96
34.19
3453.15
517.97
3971.12
39.71
4010.83
4010.83
SKS Make
Rate Amount
2303.00 2303
575.75
2878.75
518.18
3396.93
33.96925
3430.89
710.00 355
710.00 142
536.00 375.2
872.20
157.00
1029.20
4460.09
44.60
Pluming Rate Analysis
4504.69
675.70
5180.39
51.80
5232.20
5232.20
AIP Make
Rate Amount
3420.00 3420
684.00
4104.00
738.72
4842.72
48.4272
4891.15
710.00 355
710.00 134.9
536.00 369.84
859.74
154.75
1014.49
5905.64
59.06
5964.70
894.70
6859.40
68.59
6928.00
6928.00
orming to IS:5312 complete in all respects.
SANT Make
Rate Amount
Rate Amount
3766.00 3766.00
1506.40
2259.60
406.73
2666.33
1.73 32.61
32.61
2698.94
26.99
2725.93
408.89
3134.82
31.35
Pluming Rate Analysis
3166.17
SAY Rs. 3166.17
AIP Make
Rate Amount
9835.00 9835.00
1967.00
7868.00
1416.24
9284.24
1.73 35.08
35.08
9319.32
93.19
9412.52
1411.88
10824.40
108.24
10932.64
SAY Rs. 10932.64
Rate Amount
1566.00 1566.00
626.40
939.60
169.13
1108.73
11.09
11.09
1119.82
55.99
55.99
10.08
66.07
1185.88
11.86
1197.74
179.66
1377.40
13.77
1391.18
SAY Rs. 1391.18
Rate Amount
Pluming Rate Analysis
2798.00 2798.00
1119.20
1678.80
302.18
1980.98
19.81
19.81
2000.79
100.04
100.04
18.01
118.05
2118.84
21.19
2140.03
321.00
2461.03
24.61
2485.64
SAY Rs. 2485.64
Rate Amount
3508.00 3508.00
1403.20
2104.80
378.86
2483.66
24.84
24.84
2508.50
125.43
125.43
22.58
148.00
2656.50
26.57
2683.07
402.46
3085.53
30.86
3116.38
SAY Rs. 3116.38
Rate Amount
4248.00 4248.00
1699.20
2548.80
458.78
3007.58
Pluming Rate Analysis
30.08
30.08
3037.66
151.88
151.88
27.34
179.22
3216.88
32.17
3249.05
487.36
3736.41
37.36
3773.77
SAY Rs. 3773.77
Rate Amount
5894.00 5894.00
2357.60
3536.40
636.55
4172.95
41.73
41.73
4214.68
210.73
210.73
37.93
248.67
4463.35
44.63
4507.98
676.20
5184.18
51.84
5236.02
SAY Rs. 5236.02
Rate Amount
10510.00 10510.00
4204.00
6306.00
1135.08
7441.08
74.41
74.41
7515.49
375.77
375.77
67.64
443.41
Pluming Rate Analysis
7958.90
79.59
8038.49
1205.77
9244.27
92.44
9336.71
SAY Rs. 9336.71
e.g. bends, junctions, elbow, f-tee, m-tee, offsets,
fittings required for the provision of Garden Hydrant
efilling and testing of joints complete as per
o. 735)
Rate Amount
31.20 187.20
78.62
108.58
19.54
128.12
8.00 8.00
136.12
68.06
204.18
1.73 23.39
23.39
227.57
1.73 11.69
11.69
239.26
710.00 134.90
536.00 198.32
593.00 47.44
1.73 32.16
412.82
74.31
487.13
726.39
7.26
733.66
110.05
843.70
8.44
852.14
SAY Rs. 852.14
Rate Amount
Pluming Rate Analysis
51.30 307.80
129.28
178.52
32.13
210.66
8.00 8.00
218.66
109.33
327.99
1.73 23.39
23.39
351.38
1.73 11.69
11.69
363.07
710.00 134.90
536.00 198.32
593.00 47.44
1.73 32.16
412.82
74.31
487.13
850.20
8.50
858.70
128.81
987.51
9.88
997.38
SAY Rs. 997.38
Rate Amount
76.95 461.70
193.91
267.79
48.20
315.99
8.00 8.00
323.99
161.99
485.98
1.73 23.39
23.39
509.37
1.73 11.69
Pluming Rate Analysis
11.69
521.07
710.00 134.90
536.00 198.32
593.00 47.44
1.73 32.16
412.82
74.31
487.13
1008.19
10.08
1018.28
152.74
1171.02
11.71
1182.73
SAY Rs. 1182.73
Rate Amount
119.70 718.20
301.64
416.56
74.98
491.54
8.00 8.00
499.54
249.77
749.30
1.73 23.39
23.39
772.69
1.73 11.69
11.69
784.39
710.00 134.90
536.00 198.32
593.00 47.44
1.73 32.16
412.82
74.31
487.13
1271.52
12.72
1284.23
192.63
1476.87
14.77
Pluming Rate Analysis
1491.64
SAY Rs. 1491.64
Rate Amount
182.45 1094.70
459.77
634.93
114.29
749.21
8.00 8.00
757.21
378.61
1135.82
1.73 23.39
23.39
1159.21
1.73 11.69
11.69
1170.90
710.00 134.90
536.00 198.32
593.00 47.44
1.73 32.16
412.82
74.31
487.13
1658.03
16.58
1674.61
251.19
1925.80
19.26
1945.06
SAY Rs. 1945.06
Rate Amount
261.45 1568.70
658.85
909.85
163.77
1073.62
8.00 8.00
1081.62
540.81
1622.43
Pluming Rate Analysis
1.73 23.39
23.39
1645.82
1.73 11.69
11.69
1657.51
710.00 134.90
536.00 198.32
593.00 47.44
1.73 32.16
412.82
74.31
487.13
2144.64
21.45
2166.09
324.91
2491.00
24.91
2515.91
SAY Rs. 2515.91
Rate Amount
372.95 2237.70
939.83
1297.87
233.62
1531.48
8.00 8.00
1539.48
769.74
2309.22
1.73 23.39
23.39
2332.61
1.73 11.69
11.69
2344.31
710.00 134.90
536.00 198.32
593.00 47.44
1.73 32.16
412.82
74.31
487.13
2831.44
Pluming Rate Analysis
28.31
2859.75
428.96
3288.71
32.89
3321.60
SAY Rs. 3321.60
Rate Amount
555.85 3335.10
1400.74
1934.36
348.18
2282.54
12.00 12.00
2294.54
1147.27
3441.81
1.73 30.36
30.36
3472.18
1.73 13.94
13.94
3486.12
710.00 163.30
536.00 241.20
593.00 65.23
1.73 32.16
501.89
90.34
592.23
4078.35
40.78
4119.13
617.87
4737.00
47.37
4784.37
SAY Rs. 4784.37
Rate Amount
1171.35 7028.10
2951.80
4076.30
733.73
4810.03
8.00 8.00
Pluming Rate Analysis
4818.03
2409.02
7227.05
1.73 30.36
30.36
7257.41
1.73 13.94
13.94
7271.35
710.00 163.30
536.00 241.20
593.00 65.23
1.73 32.16
501.89
90.34
592.23
7863.58
78.64
7942.22
1191.33
9133.55
91.34
9224.89
SAY Rs. 9224.89
xide Primer Coat with 6mm thick 'Kaiflex' /Careflex
g hermetic blister closed cell structure of expanded
ng all required accessories complete as per
ter of 1:3 (1 Cement: 3 Coarse sand).(As observed
Rate Amount
Rate Amount
42.00 42.00
4.20
37.80
0.00
37.80
0.38
0.38
38.18
710.00 71.00
536.00 53.60
124.60
22.43
147.03
185.21
1.85
187.06
Pluming Rate Analysis
28.06
215.12
2.15
217.27
SAY Rs. 217.27
Rate Amount
Rate Amount
48.00 48.00
4.80
43.20
0.00
43.20
0.43
0.43
43.63
710.00 71.00
536.00 53.60
124.60
22.43
147.03
190.66
1.91
192.57
28.88
221.45
2.21
223.67
SAY Rs. 223.67
Rate Amount
Rate Amount
55.00 55.00
5.50
49.50
0.00
49.50
0.50
0.50
50.00
710.00 71.00
536.00 53.60
124.60
22.43
147.03
197.02
1.97
198.99
29.85
228.84
2.29
231.13
Pluming Rate Analysis
SAY Rs. 231.13
er I.S. 1239 (Class C) with 6mm thick M.S. Plate of
tanks, complete with all details in all respects and
Rate Amount
Rate Amount
750.00 750.00
0.00
750.00
135.00
885.00
8.85
8.85
893.85
710.00 71.00
536.00 53.60
124.60
22.43
147.03
1040.88
10.41
1051.29
157.69
1208.98
12.09
1221.07
SAY Rs. 1221.07
Rate Amount
Rate Amount
800.00 800.00
0.00
800.00
144.00
944.00
9.44
9.44
953.44
710.00 71.00
536.00 53.60
124.60
22.43
147.03
1100.47
11.00
1111.47
166.72
1278.19
12.78
1290.98
Pluming Rate Analysis
SAY Rs. 1290.98
Rate Amount
Rate Amount
950.00 950.00
0.00
950.00
171.00
1121.00
11.21
11.21
1132.21
710.00 71.00
536.00 53.60
124.60
22.43
147.03
1279.24
12.79
1292.03
193.80
1485.83
14.86
1500.69
SAY Rs. 1500.69
Rate Amount
Rate Amount
1250.00 1250.00
0.00
1250.00
225.00
1475.00
14.75
14.75
1489.75
710.00 71.00
536.00 53.60
124.60
22.43
147.03
1636.78
16.37
1653.15
247.97
1901.12
19.01
1920.13
SAY Rs. 1920.13
Rate Amount
Pluming Rate Analysis
Rate Amount
1600.00 1600.00
0.00
1600.00
288.00
1888.00
18.88
18.88
1906.88
710.00 71.00
536.00 53.60
124.60
22.43
147.03
2053.91
20.54
2074.45
311.17
2385.61
23.86
2409.47
SAY Rs. 2409.47
Rate Amount
Rate Amount
2000.00 2000.00
0.00
2000.00
360.00
2360.00
23.60
23.60
2383.60
710.00 71.00
536.00 53.60
124.60
22.43
147.03
2530.63
25.31
2555.93
383.39
2939.32
29.39
2968.72
SAY Rs. 2968.72
Rate Amount
Rate Amount
2700.00 2700.00
0.00
2700.00
Pluming Rate Analysis
486.00
3186.00
31.86
31.86
3217.86
710.00 71.00
536.00 53.60
124.60
22.43
147.03
3364.89
33.65
3398.54
509.78
3908.32
39.08
3947.40
SAY Rs. 3947.40
e, in cast iron body with Ductile Iron disc, EPDM
th cast iron hand level companion flanges, bolts,
on, with single phase Electrical Actuator, of 15Nm-
d weather proof heavy duty motor, with stabilized
ll housing seals, low noise level, built –in thermal
engineer - in - charge.
Rate Amount
12076.00 12076
603.80
12679.80
2282.36
14962.16
149.62164
15111.79
710.00 213
710.00 113.6
536.00 246.56
573.16
103.17
676.33
15788.11
157.88
15946.00
2391.90
18337.89
183.38
18521.27
Pluming Rate Analysis
18521.27
Rate Amount
12420.00 12420
621.00
13041.00
2347.38
15388.38
153.8838
15542.26
710.00 355
710.00 142
536.00 375.2
872.20
157.00
1029.20
16571.46
165.71
16737.17
2510.58
19247.75
192.48
19440.23
19440.23
d tank with threaded or flanged joints, including M.S.
Rate Amount
800.00 800.00
0.00
800.00
144.00
944.00
50.00
50.00
9.00
59.00
1003.00
10.03
1013.03
151.95
1164.98
11.65
1176.63
SAY Rs. 1176.63
Pluming Rate Analysis
l display provision & including Pulse generator and
ions and approval as per engineer incharge. (Refer
Rate Amount
Roca
15100.00 15100.00
15100.00
0.00
15100.00
2718.00
17818.00
1.73 44.98
44.98
17862.98
1.73 224.90
1.73 44.98
119.55 239.10
508.98
18371.96
1.73 67.47
67.47
12.14
79.61
18451.57
184.52
18636.09
2795.41
21431.50
214.32
21645.82
Say Rs. 21645.82
Rate Amount
Roca
16900.00 16900.00
16900.00
0.00
16900.00
3042.00
19942.00
1.73 44.98
44.98
19986.98
1.73 224.90
1.73 44.98
119.55 239.10
508.98
20495.96
Pluming Rate Analysis
1.73 67.47
67.47
12.14
79.61
20575.57
205.76
20781.33
3117.20
23898.53
238.99
24137.52
Say Rs. 24137.52
Rate Amount
335.00 3350.00
301.50
3048.50
548.73
3597.23
873.84 87.38
92.24 0.83
103.77 1.25
89.46
3686.69
50 250.00
5700.00 51.30
760.00 9.12
310.42
3997.11
710.00 383.40
653.00 352.62
536.00 804.00
593.00 136.39
1676.41
301.75
1978.16
5975.27
59.75
6035.03
905.25
6940.28
69.40
Pluming Rate Analysis
7009.68
700.97
Say Rs. 700.97
Rate Amount
450.00 4500.00
405.00
4095.00
737.10
4832.10
873.84 87.38
92.24 0.83
103.77 1.25
89.46
4921.56
50 250.00
5700.00 51.30
760.00 9.12
310.42
5231.98
710.00 383.40
653.00 352.62
536.00 804.00
593.00 136.39
1676.41
301.75
1978.16
7210.14
72.10
7282.24
1092.34
8374.58
83.75
8458.33
845.83
Say Rs. 845.83
Rate Amount
625.00 6250.00
562.50
5687.50
1023.75
6711.25
1080.08 0.12
Pluming Rate Analysis
760.00 11.40
103.77 1.56
13.08
6724.33
55 220.00
5700.00 62.70
760.00 11.40
294.10
7018.43
710.00 418.90
653.00 385.27
536.00 621.76
593.00 118.60
1544.53
278.02
1822.55
8840.97
88.41
8929.38
1339.41
10268.79
102.69
10371.48
1037.15
Say Rs. 1037.15
Rate Amount
1315.00 13150.00
1183.50
11966.50
2153.97
14120.47
1080.08 1.08
92.24 1.11
760.00 12.92
15.11
14135.58
5700.00 68.40
760.00 12.92
81.32
14216.90
710.00 266.25
653.00 244.88
Pluming Rate Analysis
536.00 1291.76
593.00 195.69
1998.58
359.74
2358.32
16575.22
165.75
16740.97
2511.15
19252.11
192.52
19444.63
1944.46
Say Rs. 1944.46
Rate Amount
1700.00 17000.00
1530.00
15470.00
2784.60
18254.60
1080.08 1.08
92.24 1.11
760.00 12.92
15.11
18269.71
5700.00 68.40
760.00 12.92
81.32
18351.03
710.00 266.25
653.00 244.88
536.00 1291.76
593.00 195.69
1998.58
359.74
2358.32
20709.35
207.09
20916.44
3137.47
24053.90
240.54
24294.44
2429.44
Say Rs. 2429.44
ne aggregate 40 mm nominal size) all-round
Pluming Rate Analysis
Rate Amount
5481.95 10415.71
10415.71
1041.57
SAY Rs. 1041.57
Rate Amount
5481.95 12060.29
12060.29
1206.03
SAY Rs. 1206.03
Rate Amount
5481.95 13704.88
13704.88
1370.49
SAY Rs. 1370.49
Rate Amount
Pluming Rate Analysis
5481.95 16445.85
16445.85
1644.59
SAY Rs. 1644.59
Rate Amount
5481.95 18254.89
18254.89
1825.49
SAY Rs. 1825.49
Rate Amount
5481.95 19186.83
19186.83
1918.68
SAY Rs. 1918.68
Rate Amount
Pluming Rate Analysis
5481.95 21379.61
21379.61
2137.96
SAY Rs. 2137.96
Rate Amount
5481.95 23572.39
23572.39
2357.24
SAY Rs. 2357.24
working pressure rating PN 4 (0.4 maximum
ncluding testing of joints etc. complete (Ref. DAR
Rate Amount
657.13 3942.78
985.70
2957.09
532.28
3489.36
1046.81
1046.81
4536.17
45.36
45.36
4581.53
1.73 9.22
Pluming Rate Analysis
9.22
4590.75
710.00 234.30
653.00 855.43
536.00 702.16
1791.89
322.54
2114.43
6705.18
67.05
6772.23
1015.83
7788.07
77.88
7865.95
1310.99
SAY Rs. 1310.99
Rate Amount
1290.80 7744.80
1936.20
5808.60
1045.55
6854.15
2056.24
2056.24
8910.39
89.10
89.10
8999.50
740.00 3944.20
3944.20
12943.70
710.00 234.30
653.00 855.43
536.00 702.16
1791.89
322.54
2114.43
15058.13
150.58
15208.71
2281.31
17490.01
174.90
17664.91
Pluming Rate Analysis
2944.15
SAY Rs. 2944.15
Rate Amount
1590.75 9544.50
2386.13
7158.38
1288.51
8446.88
2534.06
2534.06
10980.95
109.81
109.81
11090.76
1.73 9.22
9.22
11099.98
710.00 234.30
653.00 855.43
536.00 702.16
1791.89
322.54
2114.43
13214.41
132.14
13346.55
2001.98
15348.53
153.49
15502.02
2583.67
SAY Rs. 2583.67
Rate Amount
3139.23 18835.38
4708.85
14126.54
2542.78
16669.31
5000.79
5000.79
21670.10
216.70
Pluming Rate Analysis
216.70
21886.81
1.73 9.22
9.22
21896.03
710.00 234.30
653.00 855.43
536.00 702.16
1791.89
322.54
2114.43
24010.46
240.10
24250.56
3637.58
27888.15
278.88
28167.03
4694.50
SAY Rs. 4694.50
Rate Amount
4725.00 28350.00
7087.50
21262.50
3827.25
25089.75
7526.93
7526.93
32616.68
326.17
326.17
32942.84
1.73 9.22
9.22
32952.06
710.00 234.30
653.00 855.43
536.00 702.16
1791.89
322.54
2114.43
35066.49
350.66
35417.16
Pluming Rate Analysis
5312.57
40729.73
407.30
41137.03
6856.17
SAY Rs. 6856.17
Rate Amount
5985.00 35910.00
8977.50
26932.50
4847.85
31780.35
9534.11
9534.11
41314.46
413.14
413.14
41727.60
1.73 9.22
9.22
41736.82
710.00 234.30
653.00 855.43
536.00 702.16
1791.89
322.54
2114.43
43851.25
438.51
44289.76
6643.46
50933.23
509.33
51442.56
8573.76
SAY Rs. 8573.76
Rate Amount
7379.40 44276.40
11069.10
33207.30
5977.31
39184.61
Pluming Rate Analysis
11755.38
11755.38
50940.00
509.40
509.40
51449.40
1.73 9.22
9.22
51458.62
710.00 234.30
653.00 855.43
536.00 702.16
1791.89
322.54
2114.43
53573.05
535.73
54108.78
8116.32
62225.10
622.25
62847.35
10474.56
SAY Rs. 10474.56
th Brick Masonry in Cement 1:4 (1 Cement: 4
graded stone aggregate 40 mm nominal size)
1:2:4 mix (1 Cement: 2 Coarse sand: 4 graded stone
omplete with providing and fixing Foot rests @300
uding 150 mm dia Inlet & Outlet pipes complete .
Rate Amount
166.40 1664.00
4478.15 3134.71
4970.30 12376.05
596.50 107.37
5772.65 4040.86
193.95 872.78
193.95 872.78
56.60 3962.00
180.85 3504.87
Pluming Rate Analysis
125.75 251.50
51.75 391.23
1621.60 16216.00
337.20 2697.60
16039.40 8019.70
4476.30 2238.15
794.55 7945.50
265.60 265.60
327.90 5246.40
263.60 1581.60
11878.55 23757.10
99145.78
SAY Rs. 99145.78
Rate Amount
11170.00 11170.00
3351.00
7819.00
1407.42
9226.42
335.10
335.10
9561.52
478.08
478.08
86.05
564.13
10125.65
101.26
10226.91
1534.04
11760.94
117.61
11878.55
SAY Rs. 11878.55
m dia. Circular Manhole cover and frames specially
er approved sample, complete in all respect
Pluming Rate Analysis
Rate Amount
124.18 124.18
37.25
86.93
15.65
102.57
1.03
1.03
103.60
5.18
5.18
0.93
6.11
109.71
1.10
110.81
16.62
127.43
1.27
128.71
SAY Rs. 128.71
with 16x16mm square bars, @ 20mm clear spacing
x5mm with 25x3mm hold fasts approximately
namel paint of approved quality and shade over one
as per attached details for drain.
Rate Amount
90.00 90.00
0.00
90.00
16.20
106.20
1.06
1.06
107.26
653.00 65.30
536.00 53.60
118.90
21.40
140.30
247.56
2.48
250.04
37.51
Pluming Rate Analysis
287.55
2.88
290.42
SAY Rs. 290.42
Rate Amount
166.40 3161.60
4478.15 8060.67
4970.30 14761.79
234.70 6336.90
327.90 2623.20
125.75 477.85
5772.65 2482.24
Pluming Rate Analysis
56.60 2943.20
378.60 1135.80
1655.20 6620.80
48604.05
48610.00
BASIC RATES
S.No. DSR Ref Description of Rate Unit DSR Rate Rate-1 Rate-2
LABOUR:
1 0100 Bandhani Day 593.00
2 0101 Bhisti Day 593.00
3 0102 Blacksmith 1st class Day 710.00
4 0103 Blacksmith 2nd class Day 653.00
5 0111 Carpenter 1st class Day 710.00
6 0112 Carpenter 2nd class Day 653.00
7 0113 Chowkidar Day 536.00
8 0114 Beldar Day 536.00
9 0115 Coolie Day 536.00
10 0116 Fitter (grade 1) Day 710.00
11 0117 Assistant Fitter or 2nd class Fitter Day 653.00
12 0119 Glazier Day 710.00
13 0122 Mason (for plaster of paris work) 1st class Day 710.00
14 0123 Mason (brick layer) 1st class Day 710.00
15 0124 Mason (brick layer) 2nd class Day 653.00
16 0125 Mason (for plain stone work) 2nd class) Day 693.00
17 Mason (for ornamental stone work) 1st class Day
0126 710.00
18 0128 Mate Day 593.00
19 0130 Mistry Day 710.00
20 0131 Painter Day 653.00
21 0138 Sprayer (for bitumen, tar etc.) Day 653.00
22 0139 Skilled Beldar (for floor rubbing etc.) Day 593.00
23 0155 Mason (average) Day 681.50
24 0156 Carpenter (average) Day 681.50
25 0157 Operator (Pile/ Special machine) Day 593.00
26 9999 Sundries 1.73
MACHINERY
27 0013 Machine for rubbing of floors Day 350.00
28 0018 Hire and running charges of Loader Day 6000.00
29 Hydraulic excavator (3D) with driver and fuel Day
0020 6500.00
MATERIALS : Shalimar
30 Stone Aggregate (Single size) : 40 mm nominal cum
size with 5% GST
0293 1250.00 2096.00
31 Stone Aggregate (Single size) : 20 mm nominal cum
size with 5% GST
0295 1300.00 2212.00
32 Stone Aggregate (Single size) : 10 mm nominal cum
size with 5% GST
0297 1300.00 2048.00
33 0367 Portland Cement tonne 5700.00
34 0368 White Cement tonne 11200.00 14600.00
35 0451 Brass screws 30 mm 100 Nos 140.00
36 0586 Chromium plated Brass screws 40 mm 100 Nos 310.00
37 0982 Coarse sand (zone III) cum 1200.00 3490.00
S.No. DSR Ref Description of Rate Unit DSR Rate Rate-1 Rate-2
38 0983 Fine sand (zone IV) cum 760.00 1060.00
39 1159 Stone dust cum 865.00 2484.00
40 Cutting marble or sand stone slab up to 50 mm metre
thick by mechanical device
1237 10.00
41 Common burnt clay F.P.S.( non modular) bricks 1000 Nos
tile class designation 10
1984 5200.00
42 2209 Carriage of white Cement tonne 92.24
43 2209 Carriage of white Cement tonne 92.24
NON-DSR
44 European Water Closet Each 9340.00 8910.00
45 In wall Concealed Cistern Each 6810.00 6120.00
45 Wash Basin Each 8090.00 2140.00
46 Urinal Each 7900.00 16180.00
46 Flushing system Urinal Each 18490.00 7000.00
47 Stainless steel sink double bowl single drain board Each 11180.00 12717.00
47 Shortbody Bib cock Each 2360.00 690.00
48 Long body Bib cock Each 1190.00 960.00
48 CP Brass Towel rail Each 6450.00 1100.00
49 CP Brass Towel ring Each 1180.00 760.00
49 SS Liquid soap dispenser Each 19993.00 3220.00
50 CP Brass bottle trap Each 1610.00 1150.00
50 C.P. brass angle valve Each 1160.00 1125.00
51 Jumbo toilet paper holder Each 3790.00 469.00
51 S.S. body tissue paper dispenser Each 1320.00 3600.00
52 Health Faucet Each 2750.00 970.00
52 Divertor Each 3995.00 4020.00
53 Shower Head with shower arm Each 14710.00 790.00
53 Bath spout Each 4120.00 1080.00
54 Grab bar Each 5150.00 1610.00
54 Sliding rail Each 6565.00 6640.00
55 WC Pan connector Each 1080.00 1160.00
55 Double coat hook Each 895.00 390.00
56 Sink Mixer Each 6560.00 3440.00
56 Automatic sensor faucet for cold water Each 19200.00 7890.00
57 Aerosol perfume dispenser Each 2180.00 1400.00
57 M.S. Pipe 150 mm dia Metre 1209.00 1180.60
58 M.S. Pipe 200 mm dia Metre 1616.02 1877.00
58 M.S. Pipe 250 mm dia Metre 2025.85 2354.00
59 M.S. Pipe 300 mm dia Metre 2411.42 2804.00
59 Reducing elbow Each 1160.00 1310.00
60 G.I. Pipe (Medium duty) 100 mm dia Each 1150.00 867.45
60 SS Grating Each 600.00 700.00
61 Dome Grating 250 mm dia Each 19500.00 20000.00
61 Dome Grating 300 mm dia Each 25000.00 27000.00
62 Cleanout plug 100 mm dia Each 600.00 590.00
62 Cleanout plug 150 mm dia Each 950.00 945.00
63 G.I. Socket 100 mm dia Each 667.00 660.00
S.No. DSR Ref Description of Rate Unit DSR Rate Rate-1 Rate-2
63 G.I. Socket 150 mm dia Each 1389.00 1350.00
64 Drip seal Kg 225.00 225.00
64 C.I. 3989 150 mm dia Hubless Each 1480.00
65 G.I. Pipe Class 25 mm dia Each 339.00 216.30
65 G.I. Pipe Class 32 mm dia Each 364.00 279.80
66 G.I. Pipe Class 40 mm dia Each 415.00 322.90
66 G.I. Pipe Class 50 mm dia Each 591.00 447.40
67 G.I. Pipe Class 65 mm dia Each 739.00 563.55
67 G.I. Pipe Class 80 mm dia Each 941.00 704.40
68 G.I. Pipe Class 100 mm dia Each 1356.00 1010.90
68 G.I. Pipe Class 150 mm dia Each 2006.00 1511.00
69 CPVC Pipe 40 mm dia Each 338.50 300.00
69 CPVC Pipe 50 mm dia Each 563.50 500.00
70 CPVC Pipe 65 mm dia (Schedule 40) Each 968.50 888.33
70 SS 316 Pipe 22 mm dia Each 908.00 585.00
71 SS 316 Pipe 35 mm dia Each 1656.00 1178.00
71 SS 316 Pipe 42 mm dia Each 2034.00 1425.00
72 SS 316 Pipe 54 mm dia Each 2622.00 1846.00
72 SS 316 Pipe 75 mm dia Each 5305.00 3474.00
73 SS 316 Pipe 90 mm dia Each 6142.00 4074.00
73 G.I. Union 100 mm dia Each 1570.00 1820.00
74 G.I. Union 150 mm dia Each 4570.00
74 Ball valve 15 mm dia Each 335.00 320.00
75 Ball valve 20 mm dia Each 462.00 455.00
75 Ball valve 25 mm dia Each 718.00 704.00
76 Ball valve 32 mm dia Each 1226.00 1216.00
76 Ball valve 40 mm dia Each 1785.00 1730.00
77 Ball valve 50 mm dia Each 2563.00 2527.00
77 Butterfly valve 65 mm dia Each 1656.00 2301.00
S.No. DSR Ref Description of Rate Unit DSR Rate Rate-1 Rate-2
78 Butterfly valve 80 mm dia Each 1841.00 2795.00
78 Butterfly valve 100 mm dia Each 2303.00 3457.00
79 Butterfly valve 150 mm dia Each 3817.00 5260.00
79 Non-return valve 65 mm dia Each 4970.00 3766.00
80 Non-return valve 150 mm dia Each 16430.00 12921.00
80 Pressure reducing valve 20 mm dia Each 1795.00 1566.00
81 Pressure reducing valve 25 mm dia Each 3266.00 2798.00
81 Pressure reducing valve 32 mm dia Each 4020.00 3508.00
82 Pressure reducing valve 40 mm dia Each 4550.00 4248.00
82 Pressure reducing valve 50 mm dia Each 6520.00 5894.00
83 Pressure reducing valve 65 mm dia Each 12052.00 10510.00
83 uPVC water pipe 25 mm dia Each 44.17 31.20
84 uPVC water pipe 32 mm dia Each 72.67 51.30
84 uPVC water pipe 40 mm dia Each 109.00 76.95
85 uPVC water pipe 50 mm dia Each 169.50 119.70
85 uPVC water pipe 63 mm dia Each 250.83 182.45
86 uPVC water pipe 75 mm dia Each 358.00 261.45
86 uPVC water pipe 90 mm dia Each 511.33 372.95
87 uPVC water pipe 110 mm dia Each 763.00 555.85
87 uPVC water pipe 160 mm dia Each 1608.33 1171.35
88 Thermal insulation 15 mm dia Each 42.00 45.00
88 Thermal insulation 20 mm dia Each 48.00 50.00
89 Thermal insulation 25 mm dia Each 55.00 55.00
89 Puddle flange 32 mm dia Each 750.00 800.00
90 Puddle flange 40 mm dia Each 800.00 900.00
90 Puddle flange 50 mm dia Each 950.00 1000.00
91 Puddle flange 65 mm dia Each 1250.00 1300.00
91 Puddle flange 80 mm dia Each 1600.00 1700.00
92 Puddle flange 100 mm dia Each 2000.00 2100.00
92 Puddle flange 150 mm dia Each 2700.00 2900.00
93 Butterfly valve with Motorized Actuator 80 mm dia Each 12077.00 13568.00
93 Butterfly valve with Motorized Actuator 100 mm dia Each 16390.00 19017.00
94 insect proof coupling 100 mm dia Each 800.00 850.00
94 Water flow meter 50 mm dia Each 27500.00 15100.00
95 Water flow meter 65 mm dia Each 28500.00 16900.00
95 NP3 RCC Pipe 200 mm dia Each 480.00 335.00
96 NP3 RCC Pipe 250 mm dia Each 530.00 450.00
96 NP3 RCC Pipe 300 mm dia Each 840.00 625.00
97 NP3 RCC Pipe 400 mm dia Each 1440.00 1315.00
97 NP3 RCC Pipe 500 mm dia Each 2160.00 1700.00
98 HDPE Pipe 160 mm dia Each 1245.00 762.50
98 HDPE Pipe 225 mm dia Each 2450.00 1497.50
99 HDPE Pipe 250 mm dia Each 3020.00 1845.50
99 HDPE Pipe 350 mm dia Each 6069.00 3704.00
100 HDPE Pipe 400 mm dia Each 7776.00 4796.00
100 HDPE Pipe 450 mm dia Each 9636.00 6176.50
101 HDPE Pipe 500 mm dia Each 12194.00 7615.50
S.No. DSR Ref Description of Rate Unit DSR Rate Rate-1 Rate-2
101 D.I. Manhole cover 600x600 mm Each 11170.00
102 D.I. Medium duty 560 mm dia Each 124.18
102 M.S. Grating Each 90.00 100.00
Rate-3 Lowest Rate
593.00
593.00
710.00
653.00
710.00
653.00
536.00
536.00
536.00
710.00
653.00
710.00
710.00
710.00
653.00
693.00
710.00
593.00
710.00
653.00
653.00
593.00
681.50
681.50
593.00
1.73
350.00
6000.00
6500.00
2200.80
2322.60
2150.40
5700.00
14600.00
140.00
310.00
3664.50
Rate-3 Lowest Rate
1113.00
2608.20
10.00
5200.00
92.24
92.24
9810.00 8910.00
5180.00 5180.00
1790.00 1790.00
6250.00 6250.00
6960.00 6960.00
11180.00
1050.00 690.00
1205.00 960.00
1045.00 1045.00
740.00 740.00
2300.00 2300.00
1160.00 1150.00
890.00 890.00
469.00
2800.00 1320.00
1320.00 970.00
3170.00 3170.00
2990.00 790.00
910.00 910.00
1240.00 1240.00
9950.00 6565.00
1080.00
400.00 390.00
3050.00 3050.00
7670.00 7670.00
1400.00
1021.28 1021.28
1600.00 1600.00
2000.00 2000.00
2411.42
1177.00 1160.00
748.99 748.99
800.00 600.00
25000.00 19500.00
28000.00 25000.00
620.00 590.00
1020.00 945.00
750.00 660.00
Rate-3 Lowest Rate
1450.00 1350.00
225.00
1480.00
159.84 159.84
207.80 207.80
245.48 245.48
329.97 329.97
424.73 424.73
522.92 522.92
748.99 748.99
1115.73 1115.73
295.90 295.90
503.40 503.40
798.75 798.75
575.00 575.00
1175.00 1175.00
1420.00 1420.00
1840.00 1840.00
3474.00
4074.00
1626.00 1570.00
4092.00 4092.00
315.00 315.00
432.00 432.00
684.00 684.00
1161.00 1161.00
1638.00 1638.00
2430.00 2430.00
1710.00 1656.00
Rate-3 Lowest Rate
1890.00 1841.00
2430.00 2303.00
3420.00 3420.00
4300.00 3766.00
9835.00 9835.00
2750.00 1566.00
2914.00 2798.00
5315.00 3508.00
6596.00 4248.00
10280.00 5894.00
15209.00 10510.00
43.96 31.20
69.74 51.30
102.17 76.95
159.99 119.70
251.56 182.45
356.86 261.45
509.01 372.95
764.84 555.85
1668.90 1171.35
53.00 42.00
65.00 48.00
68.00 55.00
850.00 750.00
950.00 800.00
1050.00 950.00
1280.00 1250.00
1650.00 1600.00
2070.00 2000.00
3000.00 2700.00
12076.00 12076.00
12420.00 12420.00
975.00 800.00
75000.00 15100.00
80000.00 16900.00
335.00
450.00
625.00
1315.00
1700.00
657.13 657.13
1290.80 1290.80
1590.75 1590.75
3139.23 3139.23
4725.00 4725.00
5985.00 5985.00
7379.40 7379.40
Rate-3 Lowest Rate
11170.00
124.18
150.00 90.00
Pluming Rate Analysis
1.00 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and
urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the c
with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as p
in-charge and finished smooth.
Granite Stone of approved shade (Refer DSR-2016 Item No. 17.78 DAR 2016 Vol-II Page No. 1160)
Total A + B
C LABOUR
Fitter 1st class Each 1.00
Mason 1st class Each 1.00
Beldar Each 1.00
Total
Add GST on ITC % 18%
Total C
Total A + B + C
Add 1% for Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Total
Cost per WC
2.00 Providing and Fixing Concealed in wall Flushing Cistern with dual flush Actuator Plate (plastic body in ap
function, noise less float valve and fast filling action with all component parts of high quality including fixing
in all respects as per direction of the engineer-in-charge (Refer DSR-2016 Item No. 17.78 DAR 2016 Vol-I
Total A + B
C LABOUR
Fitter 1st class Each 1.00
Mason 1st class Each 1.00
Beldar Each 1.00
Total
Add GST on ITC % 18%
Total C
Total A + B + C
Add 1% for Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Total
Cost per cistern
3.00 Providing and Fixing star white vitreous china wash basin for under counter mounting, specially fabricate
and connection pipe to wall with C.P. wall flange and rubber adopter for waste connection complete, incl
good the walls wherever required (Refer Item No. 17.7A DAR 2016 Vol-II Page No. 1084)
Total A + B
C LABOUR
Fitter 1st class Each 0.33
Mason 1st class Each 0.33
Beldar Each 0.63
Pluming Rate Analysis
Total
Add GST on ITC % 18%
Total C
Total A + B + C
Add 1% for Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Total
Cost per Wash Basin
4.00 Providing and Fixing vitreous china urinal with C.I. hangers, 15mm dia inlet to built in spreaders with inbui
complete including cutting and making good the walls and floors wherever required (Ref. DAR 2016 VO
No: 1161)...
Total A + B
C LABOUR
Fitter 1st class Each 0.50
Beldar Each 0.50
Total
Add GST on ITC % 18%
Total C
Total A + B + C
Add 1% for Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Total
Cost per Urinal
Pluming Rate Analysis
5.00 Providing and Fixing electrical/battery operated concealed automatic flushing system for urinals, includ
125mm chrome sensor with CP brass body, ball valve etc,complete in all respect including cutting an
wherever required (Ref. DAR 2016 VOL - II Ref No:17.80 Page No: 1161)...
Total A + B + C
Add 1% for Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Total
Cost per Urinal flushing system
8 Providing and Fixing stainless steel sink double bowl single drain board Size 1740x515 mm with C.I. b
waste,C.P. brass chain and rubber plug, CP Brass Waste coupling and C.P. wall flange rubber adap
connection complete including cutting and making good the walls wherever required. (Ref. DAR 20
No:17.10.1.1 Page No: 1086).
9 Providing and Fixing 15 mm nominal bore CP Brass short body bib cock complete including cutting an
walls wherever required.
(Ref. DAR 2016 VOL - II Ref No:18.49 Page No: 1258).
10 Providing and Fixing 15 mm nominal bore CP Brass long body bib cock complete including cutting an
wherever required (Ref. DAR 2016 VOL - II Ref No:18.51 Page No: 1259).
11 Providing and Fixing CP Towel Rail fixed to PVC cleats with C.P. brass screws including cutting and
wherever required (Kohler "K-5630IN-CP" or Approved Equivalent)
(Ref. DAR 2016 VOL - II Ref No:17.73 Page No: 1112).
LABOUR
Carpenter 2nd class Day 0.17
Beldar Day 0.17
Total - B
Add GST on ITC % 18%
Total C
Total - A+B+C
Add 1% Water Charges % 1%
12 Providing and Fixing C.P. brass towel ring "Round" fixed to PVC cleats with C.P. brass screws inclu
making good the walls wherever required
(Ref. DAR 2016 VOL - II Ref No:17.72 Page No: 1112).
13 Providing and fixing SS liquid soap dispenser with push lever assembly with soap refill fixed in wall wi
all respect as per direction of the engineer-in-charge (Kohler K-10712D-CP or Approved equivalent)
(Ref. DAR 2016 VOL - II Ref No:18.65 Page No: 1272).
15 Providing and fixing C.P. brass angle valve quarter turn of approved quality conforming to IS:8931
15mm nominal bore (Ref. DAR 2016 VOL - II Ref No:18.53.1 Page No: 1259).
16 Providing and fixing Jumbo toilet paper holder including cutting and making good the walls wherever r
2016 VOL - II Ref No:17.34.1 Page No: 1259).
C LABOUR
Carpenter 2nd class Day 0.12
Beldar Day 0.12
17 Providing and fixing S.S. body tissue paper dispenser complete including cutting and making good th
required
(Ref. DAR 2016 VOL - II Ref No:17.34.1 Page No: 1259).
LABOUR
Carpenter 2nd class Day 0.12
Beldar Day 0.12
18 Providing and fixing Health faucet with 1 metre long Flexible Tube and CP wall hook with PVC & SS S
and making good the wall wherever required complete as directed by the Engineer-in-charge (Ref. DA
No:17.16A Page No: 1093)
19 Providing and fixing C.P Single lever concealed diverter for bath and shower with Button at Top c
Engineer-in-charge (Ref. DAR 2016 VOL - II Ref No:18.64 Page No: 1272)...
S.No./ Description
Code Unit Quantity
A MATERIALS
Price of CP Single lever concealed divertor Each 1
Pluming Rate Analysis
Less: Discount % 10%
Total - A
GST % 18%
Total
9999 Carraige of material and fixing charges LS 6.76
Total - B
Total - A+B
Add 1% Water Charges % 1%
LABOUR
Carpenter 2nd class Day 0.17
Beldar Day 0.17
24 Providing and Fixing CP Hinged Arms (Sliding rail) for Handicapped Toilet with SS Screws over Rawl
instructions of the engineer-in-charge (Ref. DAR 2016 VOL - II Ref No:17.73 Page No: 1155).... .
LABOUR
Carpenter 2nd class Day 0.17
Beldar Day 0.17
25 Providing and Fixing straight / offset type flexible single body push fit type WC pan connector with fac
with integral Single mould sealing fins made of flexible EVA body, including bush / adaptor for use with
(As observed at site)
LABOUR
Installation Each 1.00
Pluming Rate Analysis
Total - B
Add GST on ITC % 18%
Total - B+C
Total - A+B+C
Add 1% Water Charges % 1%
26 Providing and fixing C.P cast brass Double coat hook fixed to PVC cleats with C.P. brass screws com
instructions of the engineer-in-charge (Ref. DAR 2014 VOL - II Ref No:17.73.1 Page No: 1155)
LABOUR
Carpenter 2nd class Day 0.17
Beldar Day 0.17
Total - C
Add GST on ITC % 18%
Total C
Total - A+B+C
Add 1% Water Charges % 1%
29 Providing and fixing automatic sensor faucet for cold water, for wash basin complete in all respect
mounted auto tap, with infrared sensors with solenoid valves for cold water with electronic circuit an
accessories including cutting and making good the walls and floors as per requirement and as per app
make or equivalent (Kohler Cat No: K-18057IN-ND-CP or Approved equivalent) (Ref. DAR 2016 VOL
No: 1258).
II 1 Providing on Fixing 'C' Class heavy duty Mild Steel pipes conforming to IS-1239 including cutting, we
fitting viz. bends, tees, reducers, crosses, flanges etc. and fixing the pipes on wall / ceiling / beam / fl
clamps / structural supports/PCC block and painting two coats of red oxide primer and two coats of sy
approved shade complete as required and as specified. (For terrace rain water system)
(Ref. CPWD E&M 2016 DAR ITEM NO. 16.1.4).
S.No./ Description
Code Unit Quantity
Basic cost of M.S. Pipe 200 mm dia
Unit Qty
Detail cost of M.S. Pipe Meter 11.50
Less: Discount % 0%
Total
GST % 18%
Total A2
Total A1+A2
Labour:
i) Fitter Grade I Day 2.50
ii) Welder Day 1.00
iii) Helper Day 4.00
iv) Painter Day 0.50
Total - B
Add GST on ITC % 18%
Total B+C
Total - A+B+C
Add 1% Water Charges % 1%
Total A2
Total A1+A2
Labour:
i) Fitter Grade I Day 2.50
ii) Welder Day 1.00
iii) Helper Day 4.00
iv) Painter Day 0.50
Total - B
Add GST on ITC % 18%
Total B+C
Total - A+B+C
Add 1% Water Charges % 1%
Total A2
Total A1+A2
Labour:
i) Fitter Grade I Day 2.50
ii) Welder Day 1.00
iii) Helper Day 4.00
iv) Painter Day 0.50
Total - B
Add GST on ITC % 18%
Total B+C
Total - A+B+C
Add 1% Water Charges % 1%
II 15 Providing and Fixing G.I. Reducing elbow of 100 x 50 mm in cement concrete 1:2:4 at all levels for flo
cost of grating) for connection to floor traps in sunken portions, complete as per drawings and as per
engineer-in-charge.
INSTALLATION
Total B
Total A + B
GST % 18%
Total A + B+C
Add 1% Water Charges % 1%
Pluming Rate Analysis
II 19 Providing and fixing G.I. Inlet fittings with maximum 3 inlets 32,40 & 50 mm size fabricated from 100 m
welded G.I. sockets, fixed to C.I. Trap and set in cement concrete as per drawing (Based on actual ob
Total A1+A2
Rate of cartage of material % 1%
Total B
Total A+B
Labour:
Labour Fabrication Each 1.0
Installation charges Each 1.0
GST % 18%
Total C
Total A+B+C
Add 1% Water Charges % 1%
II 20 Providing and Fixing SS Grating with frame and SS Screws casted heavy 125 mm dia complete as d
charge. (Ref. DAR 2014 VOL - II Ref No:18.58.1 Page No: 1263)..
Labour:
Labour Fabrication Each 1.0
Installation charges Each 1.0
GST % 18%
Total B
Total A+ B
Add 1% Water Charges % 1%
II 21 Providing and Fixing Dome Grating for roof rain water pipe with all required accessories complete as
charge. (Ref. DAR 2014 VOL - II Ref No:18.58.1 Page No: 1263)..
S.No./ Description
Code Unit Quantity
Price of Dome Grating 300 mm dia Each 1
Less: Discount % 25%
Total - A
GST % 18%
Pluming Rate Analysis
II 22 Providing and fixing cast brass cleanout plug with suitable insert keys for opening, male threa
socket caulked to spun soil pipe including cost of joint etc.complete (Based on actual observation)
Total - A1+A2
Rate of cartage of material % 1%
Total - B
Total - A+B
C) Labour
Installation Each 1.00
GST % 18%
Total C
Total - A+B+C
Add 1% Water Charges % 1%
Total - A1+A2
Rate of cartage of material % 1%
Total - B
Total - A+B
C) Labour
Installation Each 1.00
GST % 18%
Total C
Total - A+B+C
Add 1% Water Charges % 1%
II 23 Providing joints with approved type sealent compound (Drip Seal joints) to sand cast iron/centifugally
fittings of Diameter
100 mm dia
S.No./ Description
Code Unit Quantity
Price of Drip seal 100 mm dia (7 Joints per one Metre
pipe)
Total Grams per Joint = 375 Each 1
Less: Discount % 0%
Total - A
GST % 18%
Total
Rate of cartage of material % 1%
Total - B
Total - A+B
C) Labour
Installation Each 1.00
GST % 18%
Total C
Total - A+B+C
Add 1% Water Charges % 1%
II 24 Providing and fixing cast iron soil, waste and vent pipes as per IS:15905 (Hubless pipes) including all
access of any degree i.e bends, junctions, branches, end caps, reducers, cowls, offsets, access piec
clamps, stays, etc and jointing with stainless steel 304 couplings with EPDM rubber gasket, including
and floors and making good the same wherever required, all structural supports as per approved spec
per instructions of the Engineer-in-charge. (Refer DAR Vol. II 2016 Ref No. 17.35.1.3 Page No. 297).
C) Labour:
i) Fitter Grade I Day 0.42
ii) Beldar Day 0.21
iii) Bandhani Day 0.83
Total - C
GST % 18%
Total - A+B
Add 1% Water Charges % 1%
II 25 Providing & laying cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 stone aggregate 20mm a
in bed and pipe.
For 150, 100mm, 75mm and 50mm dia pipes under floor including centering & shuttering wherever re
2 Providing and fixing G.I. Class "C" Pipe complete with G.I. Fittings and clamps, including cutting and m
(internal work)
Exposed on wall
a) 25 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (Page-934, item no-18.10.4)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
(A) 25 mm dia G.I. Pipe
A1 Metre 11.50
Added 15% for fittings and wastage on (A )
Less : Discount % 10%
Total A1
Add GST % 18%
Total
2271 1.15 * 31.70 = 36.455 kg = 0.036455 tonne
Carriage of G.I. pipes below 100 mm dia Tonne 0.036455
Total A2
Total A=A1+A2
White lead, hemp, oil etc. L.S. 9.49
Cement, sand and grit etc. L.S. 4.16
Total B
Total A+B
C) LABOUR
Fitter Day 0.33
Asstt. Fitter Day 0.98
Beldar Day 0.98
Total C
Add GST on ITC % 18%
Total
Total A + B + C
Add Water Charges % 1%
Total
Pluming Rate Analysis
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
b) 32 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (Page-934, item no-18.10.4)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
(A) 32 mm dia G.I. Pipe
A1 Metre 11.50
Added 15% for fittings and wastage on (A )
Less : Discount % 10%
Total A1
Add GST % 18%
Total
2271 1.15 * 31.70 = 36.455 kg = 0.036455 tonne
Carriage of G.I. pipes below 100 mm dia Tonne 0.036455
Total A2
Total A=A1+A2
White lead, hemp, oil etc. L.S. 9.49
Cement, sand and grit etc. L.S. 4.16
Total B
Total A+B
C) LABOUR
Fitter Day 0.33
Asstt. Fitter Day 0.98
Beldar Day 0.98
Total C
Add GST on ITC % 18%
Total
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
c) 40 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (Page-934, Item no-18.10.5)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
Pluming Rate Analysis
A MATERIALS
(A) 40 mm dia G.I. Pipe
A1 Metre 11.50
Added 15% for fittings and wastage on (A )
Less : Discount % 10%
Total A1
Add GST % 18%
Total
2271 1.15 * 36.50 = 41.975 kg = 0.041975 tonne
Carriage of G.I. pipes below 100 mm dia Tonne 0.041975
Total A2
Total A1+A2
White lead, hemp, oil etc. L.S. 13.52
Cement, sand and grit etc. L.S. 5.33
Total B
Total A+B
B) LABOUR
Fitter Day 0.33
Asstt. Fitter Day 1.31
Beldar Day 1.31
Total B
Add GST on ITC % 18%
Total
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
d) 50 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (Page-934, item no-18.10.6)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
(A) 50 mm dia G.I. Pipe
A1 Metre 11.50
Added 15% for fittings and wastage on (A )
Less : Discount % 10%
Total A1
Add GST % 18%
Total
2271 1.15 * 51.70 = 59.455 kg = 0.059455 tonne
Carriage of G.I. pipes below 100 mm dia Tonne 0.059455
Total A2
Total A1+A2
White lead, hemp, oil etc. L.S. 13.52
Pluming Rate Analysis
Cement, sand and grit etc. L.S. 5.33
Total B
Total A+B
C)LABOUR
Fitter Day 0.33
Asstt. Fitter Day 1.64
Beldar Day 1.64
Total C
Add GST on ITC % 18%
Total
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
e) 65 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (Page-934, item no-18.10.6)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
(A) 65 mm dia G.I. Pipe
A1 Metre 11.50
Added 15% for fittings and wastage on (A )
Less : Discount % 10%
Total A1
Add GST % 18%
Total
2271 1.02 * 66.30 = 67.626 kg = 0.067626 tonne
Carriage of G.I. pipes below 100 mm dia Tonne 0.067626
Total A2
Total A1+A2
White lead, hemp, oil etc. L.S. 13.52
Cement, sand and grit etc. L.S. 5.33
Total B
Total A+B
C)LABOUR
Fitter Day 0.33
Asstt. Fitter Day 1.64
Beldar Day 1.64
Total C
Add GST on ITC % 18%
Total
Total A + B + C
Add Water Charges % 1%
Total
Pluming Rate Analysis
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
f) 80 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (page-934, item no-18.10.6)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
(A) 80 mm dia G.I. Pipe
A1 Metre 11.50
Added 15% for fittings and wastage on (A )
Less : Discount % 10%
Total A1
Add GST % 18%
Total
C)LABOUR
Fitter Day 0.33
Asstt. Fitter Day 1.64
Beldar Day 1.64
Total C
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
3 Providing and fixing G.I pipes Class "C" complete with G.I fittings including trenching and refilling etc. (Exte
3a) 50 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (Page-1189, item no-18.12.6)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
MATERIALS
(A) 50 mm dia G.I. Pipe
A Metre 10.20
Added 2% for fittings and wastage on (A )
Less : Discount % 10%
Total A1
Add GST % 18%
Total
2271 1.02 * 51.70 = 52.73 kg = 0.05273 tonne
Carriage of G.I. pipes below 100 mm dia Tonne 0.052734
Total A2
Total A1+A2
Total A2
Total A1+A2
White lead, hemp, oil etc. L.S. 13.52
Total B
Total A+B
C)LABOUR
Fitter Grade 1 Day 0.25
Beldar Day 0.66
Trenching and Refiling
Beldar Day 0.66
Coolie Day 0.66
Total C
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
Pluming Rate Analysis
Total A2
Total A1+A2
White lead, hemp, oil etc. L.S. 13.52
Total B
Total A+B
C)LABOUR
Fitter Grade 1 Day 0.25
Beldar Day 0.66
Trenching and Refiling
Beldar Day 0.66
Coolie Day 0.66
Total C
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
Total A2
Total A1+A2
White lead, hemp, oil etc. L.S. 13.52
Total B
Total A+B
C)LABOUR
Fitter Grade 1 Day 0.25
Beldar Day 0.66
Trenching and Refiling
Beldar Day 0.66
Coolie Day 0.66
Total C
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold w
CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointi
one step CPVC solvent cement and the cost of cutting chases and making good the same including testing
direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
e) 40 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (Page-1177, Item no-18.8.4)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
Rate of Chlorinated Polyvinyl - chloride (CPVC) pipe 40
Metre 10.00
mm outer dia.
Less : Discount % 40%
Total A
Add GST % 18%
Total
Add 75% fittings, clamps and wastage
etc. on (X)
75 * X / 100
Pluming Rate Analysis
Making chases upto 7.5 x 7.5 cm. in walls and making
good the same
Rate as per item no. 18.78 Of SH: Water Supply Metre 10
Total B
Total A+B
C)Labour
Fitter Grade 1 Day 0.33
Assistant fitter 2nd class fitter Day 0.66
Beldar Day 0.66
Total C
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
f) 50 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.8.4)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
Rate of Chlorinated Polyvinyl - chloride (CPVC) pipe
Metre 10.00
50 mm outer dia.
Less : Discount % 40%
Total
Add GST % 18%
Total
Add 75% fittings, clamps and wastage
etc. on (X)
75 * X / 100
C)Labour
Fitter Grade 1 Day 0.33
Assistant fitter 2nd class fitter Day 0.66
Beldar Day 0.66
Pluming Rate Analysis
Total C
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
g) 65 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.8.4)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
MATERIALS
Rate of Chlorinated Polyvinyl - chloride (CPVC) pipe
Metre 10.00
65 mm outer dia.
Less : Discount % 40%
Total
Add GST % 18%
Total
Labour
Fitter Grade 1 Day 0.33
Assistant fitter 2nd class fitter Day 0.66
Beldar Day 0.66
Total B
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Pluming Rate Analysis
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
5 Providing and fixing Stainless Steel pipes (Grade SS-316) confirming to JIS 3448 standard complete with
SC-Contur in accordance with DVGW regulation W534 such as sockets, bends, elbows, tees, red
clamps/structural steel supports,hangers etc. necessary adapters for GI to SS / other metals and for co
jointing, sundries,cutting holes in walls/floors/slabs & making good, complete in all respects.
a) 22 mm OD
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.85.2)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
Rate of SS 316 pipe 22 mm outer dia. Metre 10.00
Less : Discount % 10%
Total
Add GST % 18%
Total
Add 3% of Fitting & Wastage
Add 2% of T & P and sundries etc.
Total A1
b) 35 mm OD
Pluming Rate Analysis
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.85.4)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
MATERIALS
Rate of SS 316 pipe 35 mm outer dia. Metre 10.00
Less : Discount % 10%
Total
Add GST % 18%
Total
Add 3% of Fitting & Wastage
Add 2% of T & P and sundries etc.
Total A1
c) 42 mm OD
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.85.5)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
MATERIALS
Rate of SS 316 pipe 42 mm outer dia. Metre 10.00
Less : Discount % 10%
Total
Add GST % 18%
Total
Add 3% of Fitting & Wastage
Pluming Rate Analysis
Add 2% of T & P and sundries etc.
Total A1
d) 54 mm OD
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.85.5)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
Rate of SS 316 pipe 54 mm outer dia. Metre 10.00
Less : Discount % 10%
Total
Add GST % 18%
Total
Add 3% of Fitting & Wastage
Add 2% of T & P and sundries etc.
Total A1
e) 75 mm OD
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.85.5)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
Rate of SS 316 pipe 75 mm outer dia. Metre 10.00
Less : Discount % 10%
Total
Add GST % 18%
Total
Add 3% of Fitting & Wastage
Add 2% of T & P and sundries etc.
Total A1
f) 90 mm OD
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.85.5)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
MATERIALS
Rate of SS 316 pipe 90 mm outer dia. Metre 10.00
Less : Discount % 10%
Total
Add GST % 18%
Total
Add 3% of Fitting & Wastage
Add 2% of T & P and sundries etc.
Total A1
9 Providing and fixing G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws
work)
f) 100 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.46.8)
Details of cost for 1 Nos.
Pluming Rate Analysis
S.No./ Description
Code Unit Quantity
MATERIALS
G.I. Union 100 mm nominal bore Each 1
Less : Discount % 45%
Total
Add GST % 18%
Total A1
A2
Carraige of materials and sundries LS 1.82
Total A
B)LABOUR
Fitter Grade 1 Day 0.15
Beldar Day 0.15
Total B
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 1 Nos.
Say Rs.
LABOUR
Fitter Grade 1 Day 0.15
Beldar Day 0.15
Total B
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Pluming Rate Analysis
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 1 Nos.
Say Rs.
22 Providing and fixing forged brass lever operated ball valve of full flow with forged brass ball (Machined to
hard chrome plated) and spindle with setting and gland of superior quality having minimum working pre
complete in all respect.
30 Providing and Fixing Pressure Reducing station for cold water supply comprising of 2 Nos. of brass ba
bye-pass and ball valve with inbuilt strainers and a PRV (Diaphram type) unit with out going pressure
union connection including safety valve. The complete system is tested to a pressure not less than 15
to reduce the pressure from 3.5 Kg/Cm2 to 1.0 Kg/Cm2(or as desired at site) including flanges/union
washers complete as required for applications. (Horizontal or vertical as applicable). (As observed a
12.26 Providing and Laying uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all fittings e.g. bends, junc
tee, offsets, access pieces etc. jointing with solvent cement complete. Rates includes any type of fittin
provision of Garden Hydrant point in main ring of the Hydrant pipe in different location complete in wit
testing of joints complete as per direction of the engineer in charge (Refer CPWD AOR 2016 VOL -I
34 Providing and fixing thermal insulation over hot water pipes in chase having Red Oxide Primer Coa
'Kaiflex' /Careflex or approved equivalent thermal insulation tubing, a elastomeric flexible material hav
closed cell structure of expanded synthetic rubber having density of 60-90 Kg/m3 over pipes of follow
required accessories complete as per Manufactuer's specifications and finishing it as per site requirem
Plaster of 1:3 (1 Cement: 3 Coarse sand).(As observed at site)
35 Providing and fixing 750 mm long hot dipped G.I. Puddle flanges for water tanks as per I.S. 1239 (Cla
M.S. Plate of suitable size and welded alround the pipe fixed in walls, beams and top slab of R.C.C ta
details in all respects and as per drawing (As observed at site).
37 Providing & fixing butterfly valve (with motorized actuator) of rating PN 1.6, wafer type, in cast iron body wit
EPDM seal, SS single piece shaft, conforming to IS-13095 of the following sizes complete with cast iron ha
flanges, bolts, nuts, washers & inserted rubber gaskets, as required and as per enclosed specification, wit
Actuator, of 15Nm- 400Nm Torque, made of aluminium alloy (resistant to heat, acid , alkali, corrosion), and
duty motor, with stabilized start speed to effectively avoid water hammering, with waterproofing seal (IP 67)
low noise level, built –in thermal protection complete as per approved type and specifications as per instruc
- charge.
39.00 Providing, fixing and testing, double flanged Water Flow Meter complete with digital display provision & i
and Remote Totalizer complete in all respect as per manufacturers specification, instructions and a
incharge. (Refer Item No. 18.60 DAR 2016 Vol-II Page No. 1266)
IV 4.0 Providing and laying non-pressure NP3 class socketed R.C.C. pipes (medium duty) jointed with EPD
including testing of joints and checking and making good leakages wherever required complete as pe
engineer-in-charge (Ref. DAR 2016 VOL - II Ref No:19.6 Page No: 1218)..
IV 6.0 Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40
round S.W/RCC/HDPE. pipes including bed concrete as per standard design:
Cu.M. 1.90
Detail cost for 10 Metre
Pluming Rate Analysis
Detail cost for 1 Metre
Cu.M. 2.20
Detail cost for 10 Metre
Detail cost for 1 Metre
Cu.M. 2.50
Detail cost for 10 Metre
Detail cost for 1 Metre
Cu.M. 3.00
Detail cost for 10 Metre
Detail cost for 1 Metre
Cu.M. 3.33
Detail cost for 10 Metre
Detail cost for 1 Metre
Cu.M. 3.50
Detail cost for 10 Metre
Detail cost for 1 Metre
Cu.M. 3.90
Detail cost for 10 Metre
Detail cost for 1 Metre
Cu.M. 4.30
Detail cost for 10 Metre
Detail cost for 1 Metre
IV 7.0 Providing and laying of High density Polythene (HDPE Pipes) material grade PE - 80, working pressu
maximum permissible working pressure) confirming IS - 14333 jointed by Butt welding method includi
complete (Ref. DAR 2016 VOL - II Ref No:19.6 Page No: 1218)..
24.00 Construction of Grease trap of size 2 m x1 m (Internal) with effective depth of 1 m with Brick Masonr
Cement: 4 Coarse sand) over a bed of 150 mm thick PCC 1:5:10 (1 Cement: 5 Coarse sand: 10 grad
mm nominal size) including a baffle wall of Brick work, covered with RCC slab of 150 mm thickness, o
2 Coarse sand: 4 graded stone aggregate of 20 mm nominal size) including centering, shuttering and
with providing and fixing Foot rests @300 mm C to C with Two 600x600 mm D.I. Manhole Covers with
including 150 mm dia Inlet & Outlet pipes complete .
Each 16
17.58.2 Lead caulked joint 75 mm dia Each 6
Supply and Fixing of 600x600 mm dia M.H. Cover
D.I. Heavy duty (C-250, HD) Each 2
Carraige of material % 1%
Total A2
Total A1+A2
B) Labour (5%)
Total B
GST ON ITC % 18%
Total B+C
Total A+B+C
Add 1% Water Charges % 1%
26 Providing and Fixiing extra medium duty, water tight double sealed Ductile iron 560 mm dia. Circular M
frames specially casted for placing over the OH Water tanks with lifting and locking arrangements as p
complete in all respect including fixing in PCC as per site Requirement .
C)Labour:
Installation % 5%
Total C
GST ON ITC % 18%
Total B+C
Total A+B+C
Add 1% Water Charges % 1%
27 Providing and fixing M.S. grating and preferably in 600mm long pieces, fabricated with 16x16mm s
clear spacing and welded to angle iron 25x25x5mm and placed firmly on angle iron frame of 30x30x5
fasts approximately 75mm long welded at intervals of 500mm including two or more coats of synthet
approved quality and shade over one coats of primer and set in cement mortar 1:3 (1 cement : 3 coa
as per attached details for drain.
B)Labour:
Fitter 2nd class Day 0.10
Beldar Day 0.10
GST % 18%
Total C
Total A+B+C
Add 1% Water Charges % 1%
Pluming Rate Analysis
VI 18 Construction of brick masonry desilting chamber of size 200x100x60cm (effective depth) before rain
designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) , foundation concrete 1:4:8 mix (1
sand; 8 graded stone aggregate 40mm nominal size), inside and outside plastering 12mm thick with c
cement : 3 coarse sand), finished with a floating coat of neat cement inside and rough plaster on ou
grating , neatly finished complete in all respects including neccessary excavation, refilling and dispos
complete as per attached Sketch.
Total
Say Rs.
Pluming Rate Analysis
size 75x50 cm deep and 1.8 cm thick, fixed in
edding the stone in the chase with epoxy grout or
6 mm nominal size) as per direction of Engineer-
Rate Amount
Hindware Enigma slim
8910.00 8910.00
8910.00
4009.50
4900.50
882.09
5782.59
1.73 16.94
16.94
5799.53
710.00 710.00
710.00 710.00
536.00 536.00
1956.00
352.08
2308.08
8107.61
81.08
8188.68
1228.30
9416.99
94.17
9511.16
Say Rs. 9511.00
Rate Amount
Jaquar JCS-WHT-2400S
5180.00 5180.00
5180.00
518.00
4662.00
Pluming Rate Analysis
839.16
5501.16
1.73 16.94
16.94
5518.10
710.00 710.00
710.00 710.00
536.00 536.00
1956.00
352.08
2308.08
7826.18
78.26
7904.44
1185.67
9090.10
90.90
9181.01
Say Rs. 9181.00
unting, specially fabricated brackets painted white
onnection complete, including cutting and making
No. 1084)
Rate Amount
Jaquar
1790.00 1790.00
1790.00
179.00
1611.00
289.98
1900.98
80.00 80.00
65.00 65.00
1.73 27.89
1.73 23.16
1.73 46.55
1.73 23.39
266.00
2166.98
710.00 234.30
710.00 234.30
536.00 337.68
Pluming Rate Analysis
806.28
145.13
951.41
3118.39
31.18
3149.57
472.44
3622.01
36.22
3658.23
Say Rs. 3658.00
Rate Amount
Jaquar
6250.00 6250.00
6250.00
625.00
5625.00
1012.50
6637.50
1.73 16.94
16.94
6654.44
710.00 355.00
536.00 268.00
623.00
112.14
735.14
7389.58
73.90
7463.47
1119.52
8582.99
85.83
8668.82
Say Rs. 8669.00
Pluming Rate Analysis
stem for urinals, including front S.S plate 125 x
ect including cutting and making good the walls
Rate Amount
Jaquar
6960.00 6960.00
6960.00
696.00
6264.00
1127.52
7391.52
1.73 16.94
16.94
7408.46
710.00 355.00
536.00 268.00
623.00
112.14
735.14
8143.60
81.44
8225.03
1233.75
9458.79
94.59
9553.38
Say Rs. 9553.38
Rate Amount
NeelKanth
11180.00 11180.00
5590.00
5590.00
1006.20
6596.20
65.00 130.00
1.73 46.78
1.73 46.55
Pluming Rate Analysis
223.33
6819.53
710.00 156.20
710.00 426.00
536.00 439.52
1021.72
183.91
1205.63
8025.16
80.25
8105.41
1215.81
9321.23
93.21
9414.44
9414.44
SAY Rs. 9414.44
Rate Amount
Hindware
690.00 690.00
276.00
414.00
74.52
488.52
1.73 20.02
20.02
508.54
5.09
513.62
77.04
590.66
5.91
596.57
596.57
SAY Rs. 596.57
Rate Amount
Pluming Rate Analysis
960.00 960.00
96.00
864.00
155.52
1019.52
1.73 24.06
24.06
1043.58
10.44
1054.02
158.10
1212.12
12.12
1224.24
1224.24
SAY Rs. 1224.24
Rate Amount
1045.00 1045.00
418.00
627.00
112.86
739.86
21.85 43.70
190.00 11.40
1.73 7.20
62.30
802.16
653.00 111.01
536.00 91.12
202.13
36.38
238.51
1040.67
10.41
1051.08
157.66
1208.74
Pluming Rate Analysis
12.09
1220.83
1220.83
SAY Rs. 1220.83
Rate Amount
Jaquar
740.00 740.00
74.00
666.00
119.88
785.88
1.73 35.08
35.08
820.96
8.21
829.17
124.38
953.55
9.54
963.09
SAY Rs. 963.09
Rate Amount
Jaquar
2300.00 2300.00
230.00
2070.00
372.60
2442.60
1.73 11.69
11.69
2454.29
24.54
2478.84
371.83
2850.66
28.51
2879.17
Pluming Rate Analysis
ake and as per the direction of Engineerin-
Rate Amount
Hindware
1150.00 1150.00
460.00
690.00
124.20
814.20
1.73 34.60
34.60
848.80
8.49
857.29
128.59
985.88
9.86
995.74
SAY Rs. 995.74
onforming to IS:8931
).
Rate Amount
Jaquar
890.00 890.00
89.00
801.00
144.18
945.18
1.73 19.57
19.57
964.75
9.65
974.39
146.16
1120.55
11.21
1131.76
SAY Rs. 1131.76
ood the walls wherever required (Ref. DAR
Rate Amount
Dolphy
Pluming Rate Analysis
469.00 469.00
0.00
469.00
84.42
553.42
1.73 7.42
7.42
560.84
21.85 43.70
190.00 0.04
1.73 7.42
51.16
612.00
653.00 78.36
536.00 64.32
142.68
25.68
168.36
780.36
7.80
788.17
118.23
906.39
9.06
915.46
SAY Rs. 915.46
ng and making good the walls wherever
Rate Amount
Kohler 5633IN-CP
1320.00 1320.00
382.80
937.20
168.70
1105.90
1.73 7.42
7.42
1113.32
21.85 43.70
Pluming Rate Analysis
190.00 0.04
43.74
1157.06
653.00 78.36
536.00 64.32
142.68
25.68
168.36
1325.42
13.25
1338.67
200.80
1539.47
15.39
1554.87
SAY Rs. 1554.87
ll hook with PVC & SS Screws including cutting
neer-in-charge (Ref. DAR 2016 VOL - II Ref
Rate Amount
Hindware F160068
970.00 970.00
388.00
582.00
104.76
686.76
1.73 19.38
19.38
706.14
7.06
713.20
106.98
820.18
8.20
828.38
SAY Rs. 828.38
er with Button at Top complete as directed by
Rate Amount
3170.00 3170.00
Pluming Rate Analysis
317.00
2853.00
513.54
3366.54
1.73 11.69
11.69
3378.23
33.78
3412.02
511.80
3923.82
39.24
3963.06
Say Rs. 3963.06
Hindware F160039
Rate Amount
790.00 790.00
316.00
474.00
85.32
559.32
1.73 11.69
11.69
571.01
5.71
576.72
86.51
663.23
6.63
669.87
Say Rs. 669.87
Engineer-in-charge (Ref. DAR 2016 VOL - II
Rate Amount
Jaquar SPJ-CHR-429
910.00 910.00
91.00
819.00
147.42
966.42
1.73 11.69
11.69
Pluming Rate Analysis
978.11
9.78
987.90
148.18
1136.08
11.36
1147.44
Say Rs. 1147.44
ugs complete for Handicapped Toilet as directed
)....
Rate Amount
Jaquar AHS-CHR-1507
1240.00 1240.00
124.00
1116.00
200.88
1316.88
1.73 7.20
7.20
1324.08
21.85 43.70
190.00 11.40
55.10
1379.18
653.00 111.01
536.00 91.12
202.13
36.38
238.51
1617.69
16.18
1633.87
245.08
1878.95
18.79
1897.74
SAY Rs. 1897.74
SS Screws over Rawl Plugs complete as per
Page No: 1155).... .
Rate Amount
Pluming Rate Analysis
6565.00 6565.00
1313.00
5252.00
945.36
6197.36
1.73 7.20
7.20
6204.56
21.85 43.70
190.00 11.40
55.10
6259.66
653.00 111.01
536.00 91.12
202.13
36.38
238.51
6498.17
64.98
6563.15
984.47
7547.62
75.48
7623.10
SAY Rs. 7623.10
pan connector with factory supplied seal guard
sh / adaptor for use with C.I. Pipe as supplied
Geberit
Rate Amount
1080.00 1080.00
0.00
1080.00
194.40
1274.40
12.74
12.74
1287.14
50.00 50.00
Pluming Rate Analysis
50.00
9.00
59.00
1346.14
13.46
1359.61
203.94
1563.55
15.64
1579.18
SAY Rs. 1579.18
h C.P. brass screws complete as per
1 Page No: 1155)
Rate Amount
390.00 390.00
156.00
234.00
42.12
276.12
1.73 7.20
7.20
283.32
21.85 43.70
190.00 11.40
55.10
338.42
653.00 111.01
536.00 91.12
202.13
36.38
238.51
576.93
5.77
582.70
87.40
670.10
6.70
676.81
SAY Rs. 676.81
Pluming Rate Analysis
making good the walls wherever required
No: K-37315IN-4-CP or Approved equivalent).
Jaquar SOL-CHR-6309
Rate Amount
3050.00 3050.00
305.00
2745.00
494.10
3239.10
1.73 20.02
20.02
3259.12
32.59
3291.71
493.76
3785.46
37.85
3823.32
SAY Rs. 3823.32
mplete in all respect including basin
with electronic circuit and necessary
uirement and as per approved manufacturer’s
t) (Ref. DAR 2016 VOL - II Ref No:18.49 Page
Jaquar SNR-CHR-51021
Rate Amount
7670.00 7670.00
1534.00
6136.00
1104.48
7240.48
1.73 20.02
20.02
7260.50
72.60
7333.10
1099.97
8433.07
84.33
8517.40
SAY Rs. 8517.40
Pluming Rate Analysis
eats / Rawl Plug with C.P brass screws,
observed at site)
EURONICS EA03
Rate Amount
1400.00 1400.00
0.00
1400.00
252.00
1652.00
16.52
16.52
1668.52
500.00 500.00
500.00
90.00
590.00
2258.52
22.59
2281.11
342.17
2623.27
26.23
2649.50
SAY Rs. 2649.50
39 including cutting, welding, nut-bolts, gasket,
wall / ceiling / beam / floor with suitable MS
mer and two coats of synthetic enamel paint of
er system)
Rate Amount
Oriplast
1021.28 11744.72
0.00
11744.72
2114.05
13858.77
101.40 477.59
14336.36
143.36
2150.45
Pluming Rate Analysis
2293.82
16630.18
710.00 1420.00
710.00 532.50
536.00 1742.00
653.00 326.50
4021.00
723.78
4744.78
21374.96
213.75
21588.71
3238.31
24827.02
248.27
25075.29
2507.53
SAY Rs. 2507.53
Rate Amount
Oriplast
Rate Amount
1600.00 18400.00
0.00
18400.00
3312.00
21712.00
101.40 636.79
22348.79
223.49
3352.32
3575.81
25924.60
710.00 1775.00
710.00 710.00
536.00 2144.00
653.00 326.50
4955.50
891.99
5847.49
31772.09
317.72
32089.81
4813.47
36903.28
Pluming Rate Analysis
369.03
37272.31
3727.23
SAY Rs. 3727.23
Rate Amount
Oriplast
Rate Amount
2000.00 23000.00
0.00
23000.00
4140.00
27140.00
101.40 795.99
27935.99
279.36
4190.40
4469.76
32405.75
710.00 1775.00
710.00 710.00
536.00 2144.00
653.00 326.50
4955.50
891.99
5847.49
38253.24
382.53
38635.77
5795.37
44431.14
444.31
44875.45
4487.54
SAY Rs. 4487.54
Rate Amount
TATA
Rate Amount
2411.42 27731.33
0.00
27731.33
4991.64
32722.97
Pluming Rate Analysis
101.40 955.19
33678.16
336.78
5051.72
5388.51
39066.66
710.00 1775.00
710.00 710.00
536.00 2144.00
653.00 326.50
4955.50
891.99
5847.49
44914.15
449.14
45363.29
6804.49
52167.79
521.68
52689.47
5268.95
SAY Rs. 5268.95
KS Brand
Rate Amount
1160.00 1160.00
0.00
1160.00
208.80
1368.80
100.00 100.00
100.00
1468.80
100.00
100.00
1568.80
282.38
1851.18
18.51
Pluming Rate Analysis
1869.70
280.45
2150.15
21.50
2171.65
SAY Rs. 2171.65
ze fabricated from 100 mm dia G.I.pipes and
ing (Based on actual observation).
Rate Amount
748.99 299.60
0.00
299.60
53.93
353.52
660.00 1320.00
501.60
818.40
147.31
965.71
1319.24
13.19
13.19
1332.43
500.00 500.00
100.00 100.00
600.00
108.00
708.00
2040.43
20.40
2060.83
309.12
2369.96
23.70
2393.66
SAY Rs. 2393.66
Rate Amount
600.00 600.00
Pluming Rate Analysis
150.00
450.00
81.00
531.00
5.31
5.31
536.31
500.00 500.00
100.00 100.00
600.00
108.00
708.00
1244.31
12.44
1256.75
188.51
1445.27
14.45
1459.72
SAY Rs. 1459.72
Rate Amount
19500.00 19500.00
4875.00
14625.00
2632.50
17257.50
1.73 7.20
7.20
17264.70
172.65
17437.34
2615.60
20052.95
200.53
20253.47
SAY Rs. 20253.47
Rate Amount
25000.00 25000.00
6250.00
18750.00
3375.00
Pluming Rate Analysis
22125.00
1.73 7.20
7.20
22132.20
221.32
22353.52
3353.03
25706.55
257.07
25963.61
SAY Rs. 25963.61
Rate Amount
590.00 590.00
147.50
442.50
79.65
522.15
660.00 660.00
250.80
409.20
73.66
482.86
1005.01
10.05
10.05
1015.06
50.00 50.00
9.00
59.00
1074.06
10.74
1084.80
162.72
1247.52
12.48
1259.99
SAY Rs. 1259.99
Rate Amount
945.00 945.00
236.25
708.75
Pluming Rate Analysis
127.58
836.33
1350.00 1350.00
513.00
837.00
150.66
987.66
1823.99
18.24
18.24
1842.22
50.89 50.89
9.16
60.04
1902.27
19.02
1921.29
288.19
2209.49
22.09
2231.58
SAY Rs. 2231.58
nd cast iron/centifugally cast spun iron pipes &
Rate Amount
590.63 590.63
0.00
590.63
106.31
696.94
6.97
6.97
703.91
50.00 50.00
9.00
59.00
762.91
7.63
770.54
115.58
886.12
8.86
894.98
SAY Rs. 894.98
Pluming Rate Analysis
Rate Amount
1480.00 27439.20
8231.76
35670.96
11414.71
24256.25
4366.13
28622.38
1.73 93.11
93.11
28715.49
1.73 139.66
139.66
28855.15
710.00 298.20
536.00 112.56
593.00 492.19
902.95
162.53
1065.48
29920.63
299.21
30219.84
4532.98
34752.81
347.53
35100.34
1950.02
SAY Rs. 1950.02
one aggregate 20mm and down gauge) 75mm
Rate Amount
5481.95 219.28
193.95 157.10
376.38
SAY Rs. 376.38
Rate Amount
Jindal
159.84 1838.16
183.82
1654.34
297.78
1952.13
92.24 3.36
3.36
1955.49
1.73 16.42
1.73 7.20
23.61
1979.10
710.00 234.30
653.00 639.94
536.00 525.28
1399.52
251.91
1651.43
3630.54
36.31
3666.84
Pluming Rate Analysis
550.03
4216.87
42.17
4259.04
425.90
425.90
Rate Amount
Jindal
207.80 2389.70
238.97
2150.73
387.13
2537.86
92.24 3.36
3.36
2541.22
1.73 16.42
1.73 7.20
23.61
2564.84
710.00 234.30
653.00 639.94
536.00 525.28
1399.52
251.91
1651.43
4216.27
42.16
4258.43
638.77
4897.20
48.97
4946.17
494.62
494.62
Rate Amount
Pluming Rate Analysis
Jindal
245.48 2823.02
282.30
2540.72
457.33
2998.05
92.24 3.87
3.87
3001.92
1.73 23.39
1.73 9.22
32.61
3034.53
710.00 234.30
653.00 855.43
536.00 702.16
1791.89
322.54
2114.43
5148.96
51.49
5200.45
780.07
5980.52
59.81
6040.32
604.03
604.03
Rate Amount
Jindal
329.97 3794.66
379.47
3415.19
614.73
4029.92
92.24 5.48
5.48
4035.41
1.73 23.39
Pluming Rate Analysis
1.73 9.22
32.61
4068.02
710.00 234.30
653.00 1070.92
536.00 879.04
2184.26
393.17
2577.43
6645.45
66.45
6711.90
1006.78
7718.68
77.19
7795.87
779.59
780.00
Rate Amount
Jindal
424.73 4884.40
488.44
4395.96
791.27
5187.23
92.24 6.24
6.24
5193.47
1.73 23.39
1.73 9.22
32.61
5226.08
710.00 234.30
653.00 1070.92
536.00 879.04
2184.26
393.17
2577.43
7803.50
78.04
7881.54
Pluming Rate Analysis
1182.23
9063.77
90.64
9154.41
915.44
915.44
Rate Amount
Jindal
522.92 6013.58
601.36
5412.22
974.20
6386.42
92.24 8.13
8.13
6394.55
1.73 23.39
1.73 9.22
32.61
6427.16
710.00 234.30
653.00 1070.92
536.00 879.04
2184.26
393.17
2577.43
9004.59
90.05
9094.63
1364.20
10458.83
104.59
10563.42
1056.34
1056.34
Rate Amount
Pluming Rate Analysis
Jindal
748.99 8613.39
861.34
7752.05
1395.37
9147.41
92.24 15.38
15.38
9162.80
1.73 23.39
1.73 9.22
32.61
9195.41
710.00 234.30
653.00 1070.92
536.00 879.04
2184.26
393.17
2577.43
11772.83
117.73
11890.56
1783.58
13674.15
136.74
13810.89
1381.09
1381.09
Rate Amount
Jindal
1115.73 12830.90
1283.09
11547.81
2078.60
13626.41
92.24 22.59
22.59
13649.00
Pluming Rate Analysis
1.73 23.39
1.73 9.22
32.61
13681.62
710.00 234.30
653.00 1070.92
536.00 879.04
2184.26
393.17
2577.43
16259.04
162.59
16421.63
2463.24
18884.88
188.85
19073.73
1907.37
1907.37
Rate Amount
Jindal
329.97 3365.69
336.57
3029.12
545.24
3574.37
92.24 4.86
4.86
3579.23
1.73 16.42
16.42
3595.65
710.00 113.60
536.00 176.88
536.00 353.76
536.00 353.76
998.00
Pluming Rate Analysis
179.64
1177.64
4773.29
47.73
4821.02
723.15
5544.18
55.44
5599.62
559.96
559.96
Rate Amount
Jindal
424.73 4332.25
433.22
3899.02
701.82
4600.85
92.24 6.24
6.24
4607.08
1.73 23.39
23.39
4630.47
710.00 177.50
536.00 353.76
536.00 353.76
536.00 353.76
1238.78
222.98
1461.76
6092.23
60.92
6153.16
922.97
7076.13
70.76
7146.89
714.69
714.69
Pluming Rate Analysis
Rate Amount
Jindal
522.92 5333.78
533.38
4800.41
864.07
5664.48
92.24 8.13
8.13
5672.61
1.73 23.39
23.39
5696.00
710.00 177.50
536.00 353.76
536.00 353.76
536.00 353.76
1238.78
222.98
1461.76
7157.76
71.58
7229.34
1084.40
8313.74
83.14
8396.87
839.69
839.69
Rate Amount
Jindal
748.99 7639.70
763.97
6875.73
Pluming Rate Analysis
1237.63
8113.36
92.24 8.13
8.13
8121.49
1.73 23.39
23.39
8144.88
710.00 177.50
536.00 353.76
536.00 353.76
536.00 353.76
1238.78
222.98
1461.76
9606.64
96.07
9702.70
1455.41
11158.11
111.58
11269.69
1126.97
1126.97
Oriplast
Rate Amount
295.90 2959.00
1183.60
1775.40
319.57
2094.97
1571.229
Pluming Rate Analysis
93.85 938.50
2509.73
4604.70
710.00 234.30
653.00 430.98
536.00 353.76
1019.04
183.43
1202.47
5807.17
58.07
5865.24
879.79
6745.03
67.45
6812.48
681.25
681.25
Rate Amount
Astral
503.40 5034.00
2013.60
3020.40
543.67
3564.07
2673.054
93.85 938.50
3611.55
7175.63
710.00 234.30
653.00 430.98
536.00 353.76
Pluming Rate Analysis
1019.04
183.43
1202.47
8378.09
83.78
8461.87
1269.28
9731.16
97.31
9828.47
982.85
982.85
Rate Amount
798.75 7987.50
3195.00
4792.50
862.65
5655.15
4241.36
93.85 938.50
5179.86
10835.01
710.00 234.30
653.00 430.98
536.00 353.76
1019.04
183.43
1202.47
12037.48
120.37
12157.85
1823.68
13981.53
Pluming Rate Analysis
139.82
14121.35
1412.13
1412.13
Rate Amount
575.00 5750.00
575.00
5175.00
931.50
6106.50
183.195
3.6639
6293.36
92.24 0.49
0.49
6293.85
1.73 4.72
4.72
6298.57
710.00 234.30
653.00 430.98
536.00 353.76
1019.04
183.43
1202.47
7501.04
75.01
7576.05
1136.41
8712.45
87.12
8799.58
879.96
879.96
Pluming Rate Analysis
Rate Amount
1175.00 11750.00
1175.00
10575.00
1903.50
12478.50
374.355
7.4871
12860.34
92.24 0.90
0.90
12861.25
1.73 7.20
7.20
12868.44
710.00 234.30
653.00 430.98
536.00 353.76
1019.04
183.43
1202.47
14070.91
140.71
14211.62
2131.74
16343.36
163.43
16506.80
1650.68
1650.68
Rate Amount
1420.00 14200.00
1420.00
12780.00
2300.40
15080.40
452.412
Pluming Rate Analysis
9.04824
15541.86
92.24 1.14
1.14
15543.00
1.73 9.22
9.22
15552.22
710.00 234.30
653.00 430.98
536.00 353.76
1019.04
183.43
1202.47
16754.69
167.55
16922.24
2538.34
19460.57
194.61
19655.18
1965.52
1965.52
Rate Amount
1840.00 18400.00
1840.00
16560.00
2980.80
19540.80
586.22
11.72
20138.75
92.24 1.14
1.14
20139.89
1.73 9.22
9.22
20149.11
Pluming Rate Analysis
710.00 234.30
653.00 430.98
536.00 353.76
1019.04
183.43
1202.47
21351.58
213.52
21565.10
3234.76
24799.86
248.00
25047.86
2504.79
2504.79
Rate Amount
3474.00 34740.00
3474.00
31266.00
5627.88
36893.88
1106.82
22.14
38022.83
92.24 1.14
1.14
38023.98
1.73 9.22
9.22
38033.20
710.00 234.30
653.00 430.98
536.00 353.76
1019.04
183.43
1202.47
39235.66
392.36
39628.02
5944.20
45572.22
Pluming Rate Analysis
455.72
46027.95
4602.79
4602.79
Rate Amount
4074.00 40740.00
4074.00
36666.00
6599.88
43265.88
1297.98
25.96
44589.82
92.24 1.14
1.14
44590.96
1.73 9.22
9.22
44600.18
710.00 234.30
653.00 430.98
536.00 353.76
1019.04
183.43
1202.47
45802.65
458.03
46260.67
6939.10
53199.78
532.00
53731.77
5373.18
5373.18
KS Make
Pluming Rate Analysis
Rate Amount
1570.00 1570
706.50
2276.50
409.77
2686.27
1.73 3.15
2689.42
710.00 106.5
536.00 80.4
186.90
33.64
220.54
2909.96
29.10
2939.06
440.86
3379.92
33.80
3413.72
3413.72
Unik Make
Rate Amount
4092.00 4092
1554.96
5646.96
1016.45
6663.41
1.73 3.1486
6666.56
710.00 106.5
536.00 80.4
186.90
33.64
220.54
6887.10
68.87
Pluming Rate Analysis
6955.97
1043.40
7999.37
79.99
8079.36
8079.36
AIP Valves
Rate Amount
315.00 315
94.50
409.50
73.71
483.21
1.73 16.42
16.42
499.63
5.00
504.62
75.69
580.32
5.80
586.12
586.12
AIP Valves
Rate Amount
432.00 432.00
129.60
561.60
101.09
662.69
1.73 16.42
16.42
679.11
6.79
685.90
Pluming Rate Analysis
102.88
788.78
7.89
796.67
796.67
AIP Valves
Rate Amount
684.00 684
205.20
889.20
160.06
1049.26
1.73 18.6667
18.67
1067.92
10.68
1078.60
161.79
1240.39
12.40
1252.80
1252.80
AIP Valves
Rate Amount
1161.00 1161
348.30
1509.30
271.67
1780.97
1.73 21.1406
21.14
1802.11
18.02
1820.14
273.02
2093.16
20.93
2114.09
Pluming Rate Analysis
2114.09
AIP Valves
Rate Amount
1638.00 1638
491.40
2129.40
383.29
2512.69
1.73 23.3896
23.39
2536.08
25.36
2561.44
384.22
2945.66
29.46
2975.12
2975.12
AIP Valves
Rate Amount
2430.00 2430
729.00
3159.00
568.62
3727.62
1.73 25.6386
25.64
3753.26
37.53
3790.79
568.62
4359.41
43.59
4403.00
4403.00
Pluming Rate Analysis
PN 1.6 as per I.S:13095 or with integrally moulded
uts, bolts, gaskets, flanges etc., complete as
SKS Make
Rate Amount
1656.00 1656
414.00
2070.00
372.60
2442.60
24.426
2467.03
710.00 213
710.00 142
536.00 268
623.00
112.14
735.14
3202.17
32.02
3234.19
485.13
3719.32
37.19
3756.51
3756.51
SKS Make
Rate Amount
1841.00 1841
460.25
2301.25
414.23
2715.48
27.15475
2742.63
Pluming Rate Analysis
710.00 213
710.00 113.6
536.00 246.56
573.16
103.17
676.33
3418.96
34.19
3453.15
517.97
3971.12
39.71
4010.83
4010.83
SKS Make
Rate Amount
2303.00 2303
575.75
2878.75
518.18
3396.93
33.96925
3430.89
710.00 355
710.00 142
536.00 375.2
872.20
157.00
1029.20
4460.09
44.60
4504.69
675.70
5180.39
51.80
5232.20
5232.20
AIP Make
Pluming Rate Analysis
Rate Amount
3420.00 3420
684.00
4104.00
738.72
4842.72
48.4272
4891.15
710.00 355
710.00 134.9
536.00 369.84
859.74
154.75
1014.49
5905.64
59.06
5964.70
894.70
6859.40
68.59
6928.00
6928.00
g, conforming to IS:5312 complete in all
SANT Make
Rate Amount
Rate Amount
3766.00 3766.00
1506.40
2259.60
406.73
2666.33
1.73 32.61
32.61
2698.94
26.99
2725.93
408.89
3134.82
31.35
3166.17
SAY Rs. 3166.17
Pluming Rate Analysis
AIP Make
Rate Amount
9835.00 9835.00
1967.00
7868.00
1416.24
9284.24
1.73 35.08
35.08
9319.32
93.19
9412.52
1411.88
10824.40
108.24
10932.64
SAY Rs. 10932.64
Rate Amount
1566.00 1566.00
626.40
939.60
169.13
1108.73
11.09
11.09
1119.82
55.99
55.99
10.08
66.07
1185.88
11.86
1197.74
179.66
1377.40
13.77
1391.18
SAY Rs. 1391.18
Pluming Rate Analysis
Rate Amount
2798.00 2798.00
1119.20
1678.80
302.18
1980.98
19.81
19.81
2000.79
100.04
100.04
18.01
118.05
2118.84
21.19
2140.03
321.00
2461.03
24.61
2485.64
SAY Rs. 2485.64
Rate Amount
3508.00 3508.00
1403.20
2104.80
378.86
2483.66
24.84
24.84
2508.50
125.43
125.43
22.58
148.00
2656.50
26.57
2683.07
402.46
3085.53
30.86
3116.38
SAY Rs. 3116.38
Pluming Rate Analysis
Rate Amount
4248.00 4248.00
1699.20
2548.80
458.78
3007.58
30.08
30.08
3037.66
151.88
151.88
27.34
179.22
3216.88
32.17
3249.05
487.36
3736.41
37.36
3773.77
SAY Rs. 3773.77
Rate Amount
5894.00 5894.00
2357.60
3536.40
636.55
4172.95
41.73
41.73
4214.68
210.73
210.73
37.93
248.67
4463.35
44.63
4507.98
676.20
5184.18
51.84
5236.02
SAY Rs. 5236.02
Rate Amount
Pluming Rate Analysis
10510.00 10510.00
4204.00
6306.00
1135.08
7441.08
74.41
74.41
7515.49
375.77
375.77
67.64
443.41
7958.90
79.59
8038.49
1205.77
9244.27
92.44
9336.71
SAY Rs. 9336.71
fittings e.g. bends, junctions, elbow, f-tee, m-
ncludes any type of fittings required for the
location complete in with trenching, refilling and
PWD AOR 2016 VOL -I 12.41.1 Page No. 735)
Rate Amount
31.20 187.20
78.62
108.58
19.54
128.12
8.00 8.00
136.12
68.06
204.18
1.73 23.39
23.39
227.57
1.73 11.69
11.69
239.26
710.00 134.90
Pluming Rate Analysis
536.00 198.32
593.00 47.44
1.73 32.16
412.82
74.31
487.13
726.39
7.26
733.66
110.05
843.70
8.44
852.14
SAY Rs. 852.14
Rate Amount
51.30 307.80
129.28
178.52
32.13
210.66
8.00 8.00
218.66
109.33
327.99
1.73 23.39
23.39
351.38
1.73 11.69
11.69
363.07
710.00 134.90
536.00 198.32
593.00 47.44
1.73 32.16
412.82
74.31
487.13
850.20
8.50
858.70
128.81
987.51
9.88
997.38
SAY Rs. 997.38
Pluming Rate Analysis
Rate Amount
76.95 461.70
193.91
267.79
48.20
315.99
8.00 8.00
323.99
161.99
485.98
1.73 23.39
23.39
509.37
1.73 11.69
11.69
521.07
710.00 134.90
536.00 198.32
593.00 47.44
1.73 32.16
412.82
74.31
487.13
1008.19
10.08
1018.28
152.74
1171.02
11.71
1182.73
SAY Rs. 1182.73
Rate Amount
119.70 718.20
301.64
416.56
74.98
491.54
8.00 8.00
499.54
249.77
749.30
Pluming Rate Analysis
1.73 23.39
23.39
772.69
1.73 11.69
11.69
784.39
710.00 134.90
536.00 198.32
593.00 47.44
1.73 32.16
412.82
74.31
487.13
1271.52
12.72
1284.23
192.63
1476.87
14.77
1491.64
SAY Rs. 1491.64
Rate Amount
182.45 1094.70
459.77
634.93
114.29
749.21
8.00 8.00
757.21
378.61
1135.82
1.73 23.39
23.39
1159.21
1.73 11.69
11.69
1170.90
710.00 134.90
536.00 198.32
593.00 47.44
1.73 32.16
412.82
Pluming Rate Analysis
74.31
487.13
1658.03
16.58
1674.61
251.19
1925.80
19.26
1945.06
SAY Rs. 1945.06
Rate Amount
261.45 1568.70
658.85
909.85
163.77
1073.62
8.00 8.00
1081.62
540.81
1622.43
1.73 23.39
23.39
1645.82
1.73 11.69
11.69
1657.51
710.00 134.90
536.00 198.32
593.00 47.44
1.73 32.16
412.82
74.31
487.13
2144.64
21.45
2166.09
324.91
2491.00
24.91
2515.91
SAY Rs. 2515.91
Rate Amount
Pluming Rate Analysis
372.95 2237.70
939.83
1297.87
233.62
1531.48
8.00 8.00
1539.48
769.74
2309.22
1.73 23.39
23.39
2332.61
1.73 11.69
11.69
2344.31
710.00 134.90
536.00 198.32
593.00 47.44
1.73 32.16
412.82
74.31
487.13
2831.44
28.31
2859.75
428.96
3288.71
32.89
3321.60
SAY Rs. 3321.60
Rate Amount
555.85 3335.10
1400.74
1934.36
348.18
2282.54
12.00 12.00
2294.54
1147.27
3441.81
1.73 30.36
30.36
Pluming Rate Analysis
3472.18
1.73 13.94
13.94
3486.12
710.00 163.30
536.00 241.20
593.00 65.23
1.73 32.16
501.89
90.34
592.23
4078.35
40.78
4119.13
617.87
4737.00
47.37
4784.37
SAY Rs. 4784.37
Rate Amount
1171.35 7028.10
2951.80
4076.30
733.73
4810.03
8.00 8.00
4818.03
2409.02
7227.05
1.73 30.36
30.36
7257.41
1.73 13.94
13.94
7271.35
710.00 163.30
536.00 241.20
593.00 65.23
1.73 32.16
501.89
90.34
592.23
7863.58
Pluming Rate Analysis
78.64
7942.22
1191.33
9133.55
91.34
9224.89
SAY Rs. 9224.89
Red Oxide Primer Coat with 6mm thick
eric flexible material having hermetic blister
/m3 over pipes of following sizes including all
ng it as per site requirement with Cement
Rate Amount
Rate Amount
42.00 42.00
4.20
37.80
0.00
37.80
0.38
0.38
38.18
710.00 71.00
536.00 53.60
124.60
22.43
147.03
185.21
1.85
187.06
28.06
215.12
2.15
217.27
SAY Rs. 217.27
Rate Amount
Rate Amount
48.00 48.00
4.80
43.20
0.00
43.20
0.43
0.43
43.63
Pluming Rate Analysis
710.00 71.00
536.00 53.60
124.60
22.43
147.03
190.66
1.91
192.57
28.88
221.45
2.21
223.67
SAY Rs. 223.67
Rate Amount
Rate Amount
55.00 55.00
5.50
49.50
0.00
49.50
0.50
0.50
50.00
710.00 71.00
536.00 53.60
124.60
22.43
147.03
197.02
1.97
198.99
29.85
228.84
2.29
231.13
SAY Rs. 231.13
ks as per I.S. 1239 (Class C) with 6mm thick
and top slab of R.C.C tanks, complete with all
Rate Amount
Rate Amount
750.00 750.00
0.00
750.00
135.00
885.00
Pluming Rate Analysis
8.85
8.85
893.85
710.00 71.00
536.00 53.60
124.60
22.43
147.03
1040.88
10.41
1051.29
157.69
1208.98
12.09
1221.07
SAY Rs. 1221.07
Rate Amount
Rate Amount
800.00 800.00
0.00
800.00
144.00
944.00
9.44
9.44
953.44
710.00 71.00
536.00 53.60
124.60
22.43
147.03
1100.47
11.00
1111.47
166.72
1278.19
12.78
1290.98
SAY Rs. 1290.98
Rate Amount
Rate Amount
950.00 950.00
0.00
950.00
171.00
1121.00
Pluming Rate Analysis
11.21
11.21
1132.21
710.00 71.00
536.00 53.60
124.60
22.43
147.03
1279.24
12.79
1292.03
193.80
1485.83
14.86
1500.69
SAY Rs. 1500.69
Rate Amount
Rate Amount
1250.00 1250.00
0.00
1250.00
225.00
1475.00
14.75
14.75
1489.75
710.00 71.00
536.00 53.60
124.60
22.43
147.03
1636.78
16.37
1653.15
247.97
1901.12
19.01
1920.13
SAY Rs. 1920.13
Rate Amount
Rate Amount
1600.00 1600.00
0.00
1600.00
288.00
1888.00
Pluming Rate Analysis
18.88
18.88
1906.88
710.00 71.00
536.00 53.60
124.60
22.43
147.03
2053.91
20.54
2074.45
311.17
2385.61
23.86
2409.47
SAY Rs. 2409.47
Rate Amount
Rate Amount
2000.00 2000.00
0.00
2000.00
360.00
2360.00
23.60
23.60
2383.60
710.00 71.00
536.00 53.60
124.60
22.43
147.03
2530.63
25.31
2555.93
383.39
2939.32
29.39
2968.72
SAY Rs. 2968.72
Rate Amount
Rate Amount
2700.00 2700.00
0.00
2700.00
486.00
3186.00
Pluming Rate Analysis
31.86
31.86
3217.86
710.00 71.00
536.00 53.60
124.60
22.43
147.03
3364.89
33.65
3398.54
509.78
3908.32
39.08
3947.40
SAY Rs. 3947.40
ype, in cast iron body with Ductile Iron disc,
omplete with cast iron hand level companion
closed specification, with single phase Electrical
d , alkali, corrosion), and weather proof heavy
waterproofing seal (IP 67) for all housing seals,
ecifications as per instructions of the engineer - in
Rate Amount
12076.00 12076
603.80
12679.80
2282.36
14962.16
149.62164
15111.79
710.00 213
710.00 113.6
536.00 246.56
573.16
103.17
676.33
15788.11
157.88
15946.00
Pluming Rate Analysis
2391.90
18337.89
183.38
18521.27
18521.27
Rate Amount
12420.00 12420
621.00
13041.00
2347.38
15388.38
153.8838
15542.26
710.00 355
710.00 142
536.00 375.2
872.20
157.00
1029.20
16571.46
165.71
16737.17
2510.58
19247.75
192.48
19440.23
19440.23
verhead tank with threaded or flanged joints,
observed at site)
Rate Amount
800.00 800.00
0.00
800.00
144.00
944.00
50.00
Pluming Rate Analysis
50.00
9.00
59.00
1003.00
10.03
1013.03
151.95
1164.98
11.65
1176.63
SAY Rs. 1176.63
gital display provision & including Pulse generator
tion, instructions and approval as per engineer
Rate Amount
Roca
15100.00 15100.00
15100.00
0.00
15100.00
2718.00
17818.00
1.73 44.98
44.98
17862.98
1.73 224.90
1.73 44.98
119.55 239.10
508.98
18371.96
1.73 67.47
67.47
12.14
79.61
18451.57
184.52
18636.09
2795.41
21431.50
214.32
21645.82
Say Rs. 21645.82
Pluming Rate Analysis
Rate Amount
Roca
16900.00 16900.00
16900.00
0.00
16900.00
3042.00
19942.00
1.73 44.98
44.98
19986.98
1.73 224.90
1.73 44.98
119.55 239.10
508.98
20495.96
1.73 67.47
67.47
12.14
79.61
20575.57
205.76
20781.33
3117.20
23898.53
238.99
24137.52
Say Rs. 24137.52
Rate Amount
335.00 3350.00
301.50
3048.50
548.73
3597.23
873.84 87.38
92.24 0.83
Pluming Rate Analysis
103.77 1.25
89.46
3686.69
50 250.00
5700.00 51.30
760.00 9.12
310.42
3997.11
710.00 383.40
653.00 352.62
536.00 804.00
593.00 136.39
1676.41
301.75
1978.16
5975.27
59.75
6035.03
905.25
6940.28
69.40
7009.68
700.97
Say Rs. 700.97
Rate Amount
450.00 4500.00
405.00
4095.00
737.10
4832.10
873.84 87.38
92.24 0.83
103.77 1.25
89.46
4921.56
50 250.00
5700.00 51.30
760.00 9.12
310.42
5231.98
Pluming Rate Analysis
710.00 383.40
653.00 352.62
536.00 804.00
593.00 136.39
1676.41
301.75
1978.16
7210.14
72.10
7282.24
1092.34
8374.58
83.75
8458.33
845.83
Say Rs. 845.83
Rate Amount
625.00 6250.00
562.50
5687.50
1023.75
6711.25
1080.08 0.12
760.00 11.40
103.77 1.56
13.08
6724.33
55 220.00
5700.00 62.70
760.00 11.40
294.10
7018.43
710.00 418.90
653.00 385.27
536.00 621.76
593.00 118.60
1544.53
Pluming Rate Analysis
278.02
1822.55
8840.97
88.41
8929.38
1339.41
10268.79
102.69
10371.48
1037.15
Say Rs. 1037.15
Rate Amount
1315.00 13150.00
1183.50
11966.50
2153.97
14120.47
1080.08 1.08
92.24 1.11
760.00 12.92
15.11
14135.58
5700.00 68.40
760.00 12.92
81.32
14216.90
710.00 266.25
653.00 244.88
536.00 1291.76
593.00 195.69
1998.58
359.74
2358.32
16575.22
165.75
16740.97
2511.15
19252.11
192.52
19444.63
1944.46
Say Rs. 1944.46
Rate Amount
Pluming Rate Analysis
1700.00 17000.00
1530.00
15470.00
2784.60
18254.60
1080.08 1.08
92.24 1.11
760.00 12.92
15.11
18269.71
5700.00 68.40
760.00 12.92
81.32
18351.03
710.00 266.25
653.00 244.88
536.00 1291.76
593.00 195.69
1998.58
359.74
2358.32
20709.35
207.09
20916.44
3137.47
24053.90
240.54
24294.44
2429.44
Say Rs. 2429.44
ded stone aggregate 40 mm nominal size) all-
Rate Amount
5481.95 10415.71
10415.71
Pluming Rate Analysis
1041.57
SAY Rs. 1041.57
Rate Amount
5481.95 12060.29
12060.29
1206.03
SAY Rs. 1206.03
Rate Amount
5481.95 13704.88
13704.88
1370.49
SAY Rs. 1370.49
Rate Amount
5481.95 16445.85
16445.85
1644.59
SAY Rs. 1644.59
Pluming Rate Analysis
Rate Amount
5481.95 18254.89
18254.89
1825.49
SAY Rs. 1825.49
Rate Amount
5481.95 19186.83
19186.83
1918.68
SAY Rs. 1918.68
Rate Amount
5481.95 21379.61
21379.61
2137.96
SAY Rs. 2137.96
Rate Amount
Pluming Rate Analysis
5481.95 23572.39
23572.39
2357.24
SAY Rs. 2357.24
PE - 80, working pressure rating PN 4 (0.4
welding method including testing of joints etc.
Rate Amount
657.13 3942.78
985.70
2957.09
532.28
3489.36
1046.81
1046.81
4536.17
45.36
45.36
4581.53
1.73 9.22
9.22
4590.75
710.00 234.30
653.00 855.43
536.00 702.16
1791.89
322.54
2114.43
6705.18
67.05
6772.23
1015.83
7788.07
Pluming Rate Analysis
77.88
7865.95
1310.99
SAY Rs. 1310.99
Rate Amount
1290.80 7744.80
1936.20
5808.60
1045.55
6854.15
2056.24
2056.24
8910.39
89.10
89.10
8999.50
740.00 3944.20
3944.20
12943.70
710.00 234.30
653.00 855.43
536.00 702.16
1791.89
322.54
2114.43
15058.13
150.58
15208.71
2281.31
17490.01
174.90
17664.91
2944.15
SAY Rs. 2944.15
Rate Amount
1590.75 9544.50
2386.13
7158.38
1288.51
8446.88
Pluming Rate Analysis
2534.06
2534.06
10980.95
109.81
109.81
11090.76
1.73 9.22
9.22
11099.98
710.00 234.30
653.00 855.43
536.00 702.16
1791.89
322.54
2114.43
13214.41
132.14
13346.55
2001.98
15348.53
153.49
15502.02
2583.67
SAY Rs. 2583.67
Rate Amount
3139.23 18835.38
4708.85
14126.54
2542.78
16669.31
5000.79
5000.79
21670.10
216.70
216.70
21886.81
1.73 9.22
9.22
21896.03
710.00 234.30
Pluming Rate Analysis
653.00 855.43
536.00 702.16
1791.89
322.54
2114.43
24010.46
240.10
24250.56
3637.58
27888.15
278.88
28167.03
4694.50
SAY Rs. 4694.50
Rate Amount
4725.00 28350.00
7087.50
21262.50
3827.25
25089.75
7526.93
7526.93
32616.68
326.17
326.17
32942.84
1.73 9.22
9.22
32952.06
710.00 234.30
653.00 855.43
536.00 702.16
1791.89
322.54
2114.43
35066.49
350.66
35417.16
5312.57
40729.73
407.30
41137.03
6856.17
SAY Rs. 6856.17
Pluming Rate Analysis
Rate Amount
5985.00 35910.00
8977.50
26932.50
4847.85
31780.35
9534.11
9534.11
41314.46
413.14
413.14
41727.60
1.73 9.22
9.22
41736.82
710.00 234.30
653.00 855.43
536.00 702.16
1791.89
322.54
2114.43
43851.25
438.51
44289.76
6643.46
50933.23
509.33
51442.56
8573.76
SAY Rs. 8573.76
Rate Amount
7379.40 44276.40
11069.10
33207.30
5977.31
39184.61
11755.38
11755.38
50940.00
Pluming Rate Analysis
509.40
509.40
51449.40
1.73 9.22
9.22
51458.62
710.00 234.30
653.00 855.43
536.00 702.16
1791.89
322.54
2114.43
53573.05
535.73
54108.78
8116.32
62225.10
622.25
62847.35
10474.56
SAY Rs. 10474.56
f 1 m with Brick Masonry in Cement 1:4 (1
5 Coarse sand: 10 graded stone aggregate 40
of 150 mm thickness, of 1:2:4 mix (1 Cement:
entering, shuttering and reinforcement complete
D.I. Manhole Covers with Lifting arrangement,
Rate Amount
166.40 1664.00
4478.15 3134.71
4970.30 12376.05
596.50 107.37
5772.65 4040.86
193.95 872.78
193.95 872.78
56.60 3962.00
180.85 3504.87
125.75 251.50
Pluming Rate Analysis
51.75 391.23
1621.60 16216.00
337.20 2697.60
16039.40 8019.70
4476.30 2238.15
794.55 7945.50
265.60 265.60
327.90 5246.40
263.60 1581.60
11878.55 23757.10
99145.78
SAY Rs. 99145.78
Rate Amount
11170.00 11170.00
3351.00
7819.00
1407.42
9226.42
335.10
335.10
9561.52
478.08
478.08
86.05
564.13
10125.65
101.26
10226.91
1534.04
11760.94
117.61
11878.55
SAY Rs. 11878.55
n 560 mm dia. Circular Manhole cover and
cking arrangements as per approved sample,
Rate Amount
Pluming Rate Analysis
124.18 124.18
37.25
86.93
15.65
102.57
1.03
1.03
103.60
5.18
5.18
0.93
6.11
109.71
1.10
110.81
16.62
127.43
1.27
128.71
SAY Rs. 128.71
cated with 16x16mm square bars, @ 20mm
e iron frame of 30x30x5mm with 25x3mm hold
or more coats of synthetic enamel paint of
ar 1:3 (1 cement : 3 coarse sand) complete
Rate Amount
90.00 90.00
0.00
90.00
16.20
106.20
1.06
1.06
107.26
653.00 65.30
536.00 53.60
118.90
21.40
140.30
247.56
2.48
Pluming Rate Analysis
250.04
37.51
287.55
2.88
290.42
SAY Rs. 290.42
Rate Amount
166.40 3161.60
4478.15 8060.67
4970.30 14761.79
234.70 6336.90
327.90 2623.20
125.75 477.85
Pluming Rate Analysis
5772.65 2482.24
56.60 2943.20
378.60 1135.80
1655.20 6620.80
48604.05
48610.00
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on stee
SUB- galvanised iron/ steel works
ANALYSIS
(Refer DSR-2016 Item No. 13.50.3 DAR 2016 Vol-II Page No. 802)
-I
B Carraige LS 0.52
Total B
Total A+B
C LABOUR
Painter Day 0.24
Coolie Day 0.24
Brushes,sand paper including Sundries Day 10.79
Total C
Net Cost (For 10 Sqm)
Net Cost (For 1 Sqm)
B Carraige LS 1.43
Total B
Total A+B
C LABOUR
Painter Day 0.54
Coolie Day 0.54
Brushes,sand paper LS 6.76
Sundries LS 8.06
TOTAL C
Net Cost (For 10 Sqm)
Net Cost (For 1 Sqm)
B LABOUR
Mate Day 0.40
Coolie Day 2.05
TOTAL
Add GST on ITC % 18%
Total - B
TOTAL A+B
Add 1% Water Charges % 1%
B Labour
Painter Day 0.54
Coolie Day 0.54
Putty, brushes, sand paper etc LS 5.33
Sundries LS 8.06
TOTAL B
Cost of 10 Sqm
Cost (For 1 Sqm)
With ready mixed red oxide zinc chromate primer of approved brand and
SUB- manufacture on steel galvanised iron/ steel works
ANALYSIS
- VIII
(Refer DSR-2016 Item No. 13.50.3 DAR 2016 Vol-II Page No. 802)
Details of cost for 10 Sqm
S.No./ Description
Code Unit Quantity
A MATERIALS
Red oxide Zinc chromate primer Litre 0.54
Carriage LS 0.52
TOTAL A
B Labour
Painter Day 0.24
Coolie Day 0.24
Putty, brushes, sand paper etc LS 10.79
TOTAL B
Cost of 10 Sqm
Cost (For 1 Sqm)
With ready mixed red oxide zinc chromate primer of approved brand and
SUB- manufacture on steel galvanised iron/ steel works
ANALYSIS
- IX
(Refer DSR-2016 Item No. 13.50.3 DAR 2016 Vol-II Page No. 802)
Details of cost for 10 Sqm
S.No./ Description
Code Unit Quantity
A MATERIALS
Red oxide Zinc chromate primer Litre 0.54
Carriage LS 0.52
TOTAL A
B Labour
Painter Day 0.24
Coolie Day 0.24
Putty, brushes, sand paper etc LS 10.79
TOTAL B
Cost of 10 Sqm
Cost (For 1 Sqm)
brand and manufacture on steel
802)
Rate Amount
65.00 35.10
6.32
41.42
1.73 0.90
0.90
42.32
653.00 156.72
536.00 128.64
1.73 18.67
304.03
346.34
34.63
SAY Rs. 34.63
nufacture to
No. 811)
Rate Amount
203.91 236.54
42.58
279.11
1.73 2.47
2.47
281.59
653.00 352.62
536.00 289.44
1.73 11.69
1.73 13.94
667.70
949.28
94.93
SAY Rs. 94.93
avator) / manual means
or 10 sqm on plan),
5 m, including getting
s directed, within a
(Refer DSR-
Rate Amount
6500.00 268.13
6000.00 247.50
515.63
92.81
608.44
593.00 237.20
536.00 1098.80
1336.00
240.48
1576.48
2184.92
21.85
2206.77
331.02
2537.78
25.38
2563.16
256.32
SAY Rs. 256.32
avator) / manual means
or 10 sqm on plan),
5 m, including getting
s directed, within a
(Refer DSR-
Rate Amount
593.00 118.60
536.00 1340.00
593.00 118.60
1577.20
283.90
1861.10
18.61
1879.71
281.96
2161.66
21.62
2183.28
218.33
SAY Rs. 218.33
pipes
(Refer
Rate Amount
710.00 120.70
653.00 111.01
536.00 712.88
1.73 27.89
972.48
189.20
SAY Rs. 189.20
pipes
(Refer
Rate Amount
710.00 660.30
653.00 404.86
536.00 1329.28
1.73 69.49
2463.93
351.99
SAY Rs. 351.99
pipes
(Refer
Rate Amount
100.00 95.00
1.73 2.47
97.47
653.00 352.62
536.00 289.44
1.73 9.22
1.73 13.94
665.22
762.70
76.27
SAY Rs. 76.27
brand and
Rate Amount
65.00 35.10
1.73 0.90
36.00
653.00 156.72
536.00 128.64
1.73 18.67
304.03
340.03
34.00
SAY Rs. 34.00
brand and
Rate Amount
65.00 35.10
2608.20 1356.26
1391.36
5700.00 1368.00
593.00 142.32
2608.20 28142.48
29652.80
31044.16
3104.42
SAY Rs. 3104.42
PROJECT: CHOUDHARY CHARAN SINGH AIRPORT AT LUCKNOW
BILL OF QUANTITIES
BOQ - 1
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
4 Providing and Fixing vitreous china urinal with C.I. hangers, 15mm dia
inlet to built in spreaders with inbuilt waste with C.P flange, complete
including cutting and making good the walls and floors wherever required
Make: (Kohler Cat No: 5017IN-ER-0), (Hindware Senso art 60018),
Jaquar URS-WHT-132530)
BOQ - 2
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
9 Providing and Fixing stainless steel sink double bowl single drain board
Size 1740x515 mm with C.I. brackets, 40mm C.P. waste,C.P. brass chain
and rubber plug, CP Brass Waste coupling and C.P. wall flange rubber
adapter for waste connection complete including cutting and making
good the walls wherever required.
Make: (NeelKanth Cat No: NK DBSD 12 G/M), (Jayna DBSD 02(DX)
BOQ - 3
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
15 Providing and fixing CP Brass Bottle Trap of approved quality & make
and as per the direction of Engineering- charge
Make: (Kohler Cat No: 7314IN-CP), (Hindware F850015), (Jaquar ALD
CHR-769L300X190) 462 25 487.00 Each 995.74 0.00
16 Providing and fixing C.P. brass angle valve quarter turn of approved
quality conforming to IS:8931
15mm nominal bore
Make: (Kohler Cat No: 80154IN-4-CP), (Hindware Cat No: F310003),
(Jaquar FLR-CHR-5053N)
795 33 828.00 Each 1131.76 0.00
17 Providing and fixing Jumbo toilet paper holder including cutting and
making good the walls wherever required
Make: (EURONICS Cat no: EJ01), (Dolphy make) 237 8 245.00 Each 915.46 0.00
18 Providing and fixing S.S. body tissue paper dispenser complete including
cutting and making good the walls wherever required
Make: (Kohler Cat No: 5633IN-CP), (EURONICS EP 01), (UTEC UT-
TVB 4000)
86 2 88.00 Each 1554.87 0.00
19 Providing and fixing Health faucet with 1 metre long Flexible Tube and
CP wall hook with PVC & SS Screws including cutting and making good
the wall wherever required complete as directed by the Engineer-in-
charge
Make: (Kohler Cat No:12927IN-CP), (Hindware "F160068"), (Jaquar
ALD-CHR-577)
237 8 245.00 Each 828.38 0.00
20 Providing and fixing C.P Single lever concealed diverter for bath and
shower with Button at Top complete as directed by Engineer-in-charge
Make: (CERA F1014702 F4010103), (Hindware Divertor F850090 &
F110042), (Jaquar ALD-CHR-065 & FLR-CHR-5065K)
BOQ - 4
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
22 Providing and Fixing CP Bath spout with wall flange complete as directed
by Engineer-in-charge
Make: (Kohler Cat No: 8160IN-CP), (Hindware Immacula Series
F110023), (Jaquar SPJ-CHR-429) 4 1 5.00 Each 1147.44 0.00
23 Providing and fixing C.P. brass stop cock (concealed) of standard design
and of approved make conforming to IS:8931.
15 mm nominal bore
8 2 10.00 Each 545.95 5459.50
24 Providing and Fixing CP Grab bar 600 mm long with SS Screws over
Rawl plugs complete for Handicapped Toilet as directed by Engineer-in-
charge
Make: (Kohler Cat No: 10701D-CP), (EURONICS EGR 01), (Jaquar
AHS-CHR-1507)
30 30.00 Each 1897.74 0.00
25 Providing and Fixing CP Hinged Arms (Sliding rail) for Handicapped Toilet
with SS Screws over Rawl Plugs complete as per instructions of the
engineer-in-charge
Make: (Jaquar SHA-1187N) 30 30.00 Each 7623.10 0.00
26 Providing and Fixing straight / offset type flexible single body push fit type
WC pan connector with inlet ring and integral single mould sealing fins
made of flexible EVA body to be fixed with manufacture supplied grease,
including rubber bush / adaptor for use with C.I pipe as supplied with the
pan connector complete as directed by Engineer-in-charge
Make: (Geberit make), (Viega make),
BOQ - 5
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
29 Providing and fixing automatic sensor faucet for cold water, for wash
basin complete in all respect including basin mounted auto tap, with
infrared sensors with solenoid valves for cold water with electronic circuit
and necessary accessories including cutting and making good the walls
and floors as per requirement and as per approved manufacturer’s make
or equivalent
Make: (Kohler Cat No: 18057IN-ND-CP), (Hindware F240001), (Jaquar
SNR-CHR-51021)
315 11 326.00 Each 8517.40 0.00
30 Providing and Fixing C.P brass Aerosol perfume dispenser, fixed to
wooden cleats / Rawl Plug with C.P brass screws, complete including
cutting and making good the walls wherever required
Make: (EURONICS EA-03), (UTEC UT-630) 237 8 245.00 Each 2649.50 0.00
BOQ - 6
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
II SOIL, WASTE AND VENT PIPES
1 Providing on Fixing 'C' Class heavy duty 150 mm dia Mild Steel pipes
conforming to IS-1239 including cutting, welding, nut-bolts, gasket,
fitting viz. bends, tees, reducers, crosses, flanges etc. and fixing the
pipes on wall / ceiling / beam / floor with suitable MS clamps / structural
supports/PCC block and painting two coats of red oxide primer and two
coats of synthetic enamel paint of approved shade complete as required
and as specified. ( For terrace rain water system)
BOQ - 7
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
4 Providing on Fixing 'C' Class heavy duty 300 mm dia Mild Steel pipes
conforming to IS-3589 of thickness 6.3 mm including cutting, welding,
nut-bolts, gasket, fitting viz. bends, tees, reducers, crosses, flanges etc.
and fixing the pipes on wall / ceiling / beam / floor with suitable MS
clamps / structural supports/PCC block and painting two coats of red
oxide primer and two coats of synthetic enamel paint of approved shade
complete as required and as specified. ( For terrace rain water system)
BOQ - 8
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
13 Providing and fixing shielded coupling for Hubless centrifugally
cast iron pipe 100 mm dia for SS 304 grade coupling with EPDM rubber
gasket 3480 50 3530.00 Each 360.50 1272565.00
14 Providing and fixing M.S. stays and clamps for sand cast
iron/centrifugally cast (spun) iron pipes of diameter:
100mm 1235 15 1250.00 Each 62.00 77500.00
15 Providing and Fixing 100 mm inlet and 100 mm outlet for Hubless
centrifugally cast (spun) iron epoxy coated inside & outside as per
IS:15905 of self cleansing design with screwed down or hinged grating
with or without vent arm complete, including cost of cutting and making
good the walls and floors.
483 20 503.00 Each 677.60 340832.80
16 Providing and Fixing G.I. Reducing elbow of 100 x 50 mm in cement
concrete 1:2:4 at all levels for floor drains (exlcuding cost of grating) for
connection to floor traps in sunken portions, complete as per drawings
and as per approval of the engineer-in-charge.
144 8 152.00 Each 2171.65 0.00
17 Providing and Fixing G.I. pipe complete with G.I. Fittings and clamps,
including cutting and making good the walls etc.
18 Providing and Fixing 32 mm dia G.I. pipe complete with G.I. Fittings and
clamps, including cutting and making good the walls etc.
BOQ - 9
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
23 Painting of 50 mm dia G.I. Pipes and fittings with two coats of anti-
corrosive bitumastic paint of approved quality. 196 10 206.00 metre 14.80 3048.80
24 Providing and fixing G.I. Inlet fittings with maximum 3 inlets 32,40 & 50
mm size fabricated from 100 mm dia G.I. pipes and welded G.I. sockets,
fixed to C.I. Trap with lead caulked joints and set in cement
concrete(1:2:4) complete as directed by Engineer-in-charge.
BOQ - 10
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
31 Providing & laying cement concrete 1:2:4 mix (1 cement : 2 coarse
sand: 4 stone aggregate 20mm and down gauge) 75mm in bed and
pipe.
For 150, 100mm, 75mm and 50mm dia pipes under floor
including centering & shuttering wherever required.
1182 40 1222.00 metre 376.38 0.00
BOQ - 11
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
III WATER SUPPLY (INTERNAL AND EXTERNAL)
1 Excavating trenches of required width for pipes, cables, etc including
excavation for sockets, and dressing of sides, ramming of bottoms, depth
upto 1.5 m, including getting out the excavated soil, and then returning
the soil as required, in layers not exceeding 20 cm in depth, including
consolidating each deposited layer by ramming, watering, etc. and
disposing of surplus excavated soil as directed, within a lead of 50 m :
All Kinds of Soil
Pipes, cables etc, not exceeding 80 mm dia.
3 Providing and fixing 25mm dia. Nominal bore G.I. Class "C" Pipe
complete with G.I. Fittings and clamps, including cutting and making
good the walls etc. (internal work)
Exposed on wall 110 25 135.00 metre 425.90 0.00
4 Providing and fixing 32 mm dia. Nominal bore G.I. Class "C" Pipe
complete with G.I. Fittings and clamps, including cutting and making
good the walls etc. (internal work)
Exposed on wall 50 30 80.00 metre 494.62 0.00
5 Providing and fixing 40 mm dia. Nominal bore G.I. Class "C" Pipe
complete with G.I. Fittings and clamps, including cutting and making
good the walls etc. (internal work)
Exposed on wall 260 50 310.00 metre 604.03 0.00
BOQ - 12
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
6 Providing and fixing 50 mm dia. Nominal bore G.I. Class "C" Pipe
complete with G.I. Fittings and clamps, including cutting and making
good the walls etc. (internal work)
Exposed on wall 450 40 490.00 metre 780.00 0.00
7 Providing and fixing 65 mm dia. Nominal bore G.I. Class "C" Pipe
complete with G.I. Fittings and clamps, including cutting and making
good the walls etc. (internal work)
Exposed on wall 500 50 550.00 metre 915.44 0.00
8 Providing and fixing 80 mm dia. Nominal bore G.I. Class "C" Pipe
complete with G.I. Fittings and clamps, including cutting and making
good the walls etc. (internal work)
Exposed on wall 190 190.00 metre 1056.34 0.00
9 Providing and fixing 100 mm dia. Nominal bore G.I. Class "C" Pipe
complete with G.I. Fittings and clamps, including cutting and making
good the walls etc. (internal work)
Exposed on wall 2885 2885.00 metre 1381.09 0.00
10 Providing and fixing 150 mm dia. Nominal bore G.I. Class "C" Pipe
complete with G.I. Fittings and clamps, including cutting and making
good the walls etc. (internal work)
Exposed on wall 1320 1320.00 metre 1907.37 0.00
11 Providing and fixing 50 mm dia G.I pipes Class "C" complete with G.I
fittings including trenching and refilling etc. (External work) 315 315.00 metre 559.96 0.00
12 Providing and fixing 65 mm dia G.I pipes Class "C" complete with G.I
fittings including trenching and refilling etc. (External work) 260 260.00 metre 714.69 0.00
13 Providing and fixing 80 mm dia G.I pipes Class "C" complete with G.I
fittings including trenching and refilling etc. (External work) 50 50.00 metre 839.69 0.00
14 Providing and fixing 100 mm dia G.I pipes Class "C" complete with G.I
fittings including trenching and refilling etc. (External work) 930 930.00 metre 1126.97 0.00
15 Providing and fixing 15 mm dia Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at
1.00 m spacing. This includes jointing of pipes & fittings with one step
CPVC solvent cement and the cost of cutting chases and making good
the same including testing of joints complete as per direction of Engineer
in Charge.
Concealed work, including cutting chases and making good the
walls etc.
3050 50 3100.00 metre 246.20 763220.00
BOQ - 13
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
16 Providing and fixing 20 mm dia Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at
1.00 m spacing. This includes jointing of pipes & fittings with one step
CPVC solvent cement and the cost of cutting chases and making good
the same including testing of joints complete as per direction of Engineer
in Charge.
Concealed work, including cutting chases and making good the
walls etc.
1845 25 1870.00 metre 284.85 532669.50
17 Providing and fixing 25 mm dia Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at
1.00 m spacing. This includes jointing of pipes & fittings with one step
CPVC solvent cement and the cost of cutting chases and making good
the same including testing of joints complete as per direction of Engineer
in Charge.
Concealed work, including cutting chases and making good the
walls etc.
777 13 790.00 metre 333.60 263544.00
18 Providing and fixing 32 mm dia Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at
1.00 m spacing. This includes jointing of pipes & fittings with one step
CPVC solvent cement and the cost of cutting chases and making good
the same including testing of joints complete as per direction of Engineer
in Charge.
Concealed work, including cutting chases and making good the
walls etc.
597 3 600.00 metre 412.90 247740.00
19 Providing and fixing 40 mm dia Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at
1.00 m spacing. This includes jointing of pipes & fittings with one step
CPVC solvent cement and the cost of cutting chases and making good
the same including testing of joints complete as per direction of Engineer
in Charge.
Concealed work, including cutting chases and making good the
walls etc.
1140 1140.00 metre 681.25 0.00
BOQ - 14
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
20 Providing and fixing 50 mm dia Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at
1.00 m spacing. This includes jointing of pipes & fittings with one step
CPVC solvent cement and the cost of cutting chases and making good
the same including testing of joints complete as per direction of Engineer
in Charge.
Concealed work, including cutting chases and making good the
walls etc.
410.00 410.00 metre 982.85 0.00
21 Providing and fixing 65 mm dia Chlorinated Polyvinyl Chloride (CPVC
Schedule 40) pipes, having thermal stability for hot & cold water supply,
including all CPVC plain & brass threaded fittings, i/c fixing the pipe with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings with
one step CPVC solvent cement and the cost of cutting chases and
making good the same including testing of joints complete as per
direction of Engineer in Charge.
Concealed work, including cutting chases and making good the
walls etc.
130 130.00 metre 1412.13 0.00
BOQ - 15
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
25 Providing and fixing 42 mm od Stainless Steel pipes (Grade SS-316)
confirming to JIS 3448 standard complete with Press Type fittings with
SC-Contur in accordance with DVGW regulation W534 such as sockets,
bends, elbows, tees, reducers, unions, Flanges, clamps/structural steel
supports,hangers etc. necessary adapters for GI to SS / other metals and
for connections to CP fittings, jointing, sundries,cutting holes in
walls/floors/slabs & making good, complete in all respects.
29 Providing and laying S & S Centrifugaly Cast (Spun) / Ductile Iron Pipes
conforming to IS :8329:
100 mm dia Ductile Iron Class K-9 pipes 890 890.00 metre 958.95 853465.50
BOQ - 16
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
30 Providing and laying S & S Centrifugaly Cast (Spun) / Ductile Iron Pipes
conforming to IS :8329:
150 mm dia Ductile Iron Class K-9 pipes 350 350.00 metre 1438.35 503422.50
0.00 0.00
31 Providing push-on-joints of 100 mm dia for Centrifugally (Spun) Cast Iron
Pipes or Ductile Iron Pipes including testing of joints and the cost of
rubber gasket : 296.666667 296.67 Joint 65.10 19313.00
32 Providing push-on-joints of 150 mm dia for Centrifugally (Spun) Cast Iron
Pipes or Ductile Iron Pipes including testing of joints and the cost of
rubber gasket : 116.666667 116.67 Joint 102.35 11940.83
33 Providing and laying D.I. specials of class K-12 suitable for push-on
jointing as per IS : 9523 :
Up to 600 mm dia 1 1.00 Quintal 16207.45 16207.45
34 Providing and fixing 25 mm dia G.I. Union in G.I. Pipe including cutting
and threading the pipe and making long screws etc. complete (new work)
BOQ - 17
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
40 Providing and fixing 100 mm dia G.I. Union in G.I. Pipe including cutting
and threading the pipe and making long screws etc. complete (new work)
42 Painting of 50 mm dia G.I. pipes and fittings with two coats of anti-
corrosive bitumastic paint of approved quality : 315 315.00 metre 14.80 4662.00
43 Painting of 65 mm dia G.I. pipes and fittings with two coats of anti-
corrosive bitumastic paint of approved quality : 260 260.00 metre 18.25 4745.00
44 Painting of 80 mm dia G.I. pipes and fittings with two coats of anti-
corrosive bitumastic paint of approved quality : 50 50.00 metre 21.20 1060.00
45 Painting of 100 mm dia G.I. pipes and fittings with two coats of anti-
corrosive bitumastic paint of approved quality : 180 180.00 metre 24.15 4347.00
46 Painting 25 mm dia G.I. pipes and fittings with synthetic enamel white
paint
with two coats over a ready mixed priming coat, both of approved
quality for new work : 85 25 110.00 metre 15.50 1705.00
47 Painting 32 mm dia G.I. pipes and fittings with synthetic enamel white
paint
with two coats over a ready mixed priming coat, both of approved
quality for new work : 20 30 50.00 metre 18.40 920.00
48 Painting 40 mm dia G.I. pipes and fittings with synthetic enamel white
paint
with two coats over a ready mixed priming coat, both of approved
quality for new work : 210 50 260.00 metre 21.75 5655.00
49 Painting 50 mm dia G.I. pipes and fittings with synthetic enamel white
paint
with two coats over a ready mixed priming coat, both of approved
quality for new work : 410 40 450.00 metre 25.75 11587.50
BOQ - 18
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
50 Painting 65 mm dia G.I. pipes and fittings with synthetic enamel white
paint
with two coats over a ready mixed priming coat, both of approved
quality for new work : 450 50 500.00 metre 30.00 15000.00
51 Painting 80 mm dia G.I. pipes and fittings with synthetic enamel white
paint
with two coats over a ready mixed priming coat, both of approved
quality for new work : 190 190.00 metre 34.75 6602.50
52 Painting 100 mm dia G.I. pipes and fittings with synthetic enamel white
paint
with two coats over a ready mixed priming coat, both of approved
quality for new work : 2885 2885.00 metre 41.00 118285.00
53 Painting 150 mm dia G.I. pipes and fittings with synthetic enamel white
paint
with two coats over a ready mixed priming coat, both of approved
quality for new work : 1320 1320.00 metre 43.00 56760.00
54 Providing and filling sand of grading zone v or coarser grade all-round the
G.I. Pipe in external work for 32 mm dia pipe 110 110.00 metre 71.30 7843.00
55 Providing and filling sand of grading zone v or coarser grade all-round the
G.I. Pipe in external work for 40 mm dia pipe 250 250.00 metre 72.25 18062.50
56 Providing and filling sand of grading zone v or coarser grade all-round the
G.I. Pipe in external work for 50 mm dia pipe 895 895.00 metre 74.95 67080.25
57 Providing and filling sand of grading zone v or coarser grade all-round the
G.I. Pipe in external work for 65 mm dia pipe 310 310.00 metre 118.30 36673.00
58 Providing and filling sand of grading zone v or coarser grade all-round the
G.I. Pipe in external work for 80 mm dia pipe 710 710.00 metre 121.90 86549.00
59 Providing and filling sand of grading zone v or coarser grade all-round the
G.I. Pipe in external work for 100 mm dia pipe 2360 2360.00 metre 129.10 304676.00
60 Providing and filling sand of grading zone v or coarser grade all-round the
G.I. Pipe in external work for 150 mm dia pipe 450 450.00 metre 192.30 86535.00
61 Providing and fixing 20 mm dia forged brass lever operated ball valve of
full flow with forged brass ball (Machined to mirror smooth finsh with hard
chrome plated) and spindle with setting and gland of superior quality
having minimum working pressure of 10 kg/cm2 etc. complete in all
respect.
8 8.00 Each 796.67 0.00
BOQ - 19
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
62 Providing and fixing 25 mm dia forged brass lever operated ball valve of
full flow with forged brass ball (Machined to mirror smooth finsh with hard
chrome plated) and spindle with setting and gland of superior quality
having minimum working pressure of 10 kg/cm2 etc. complete in all
respect.
93 3.00 96.00 Each 1252.80 0.00
63 Providing and fixing 32 mm dia forged brass lever operated ball valve of
full flow with forged brass ball (Machined to mirror smooth finsh with hard
chrome plated) and spindle with setting and gland of superior quality
having minimum working pressure of 10 kg/cm2 etc. complete in all
respect.
51 2.00 53.00 Each 2114.09 0.00
64 Providing and fixing 40 mm dia forged brass lever operated ball valve of
full flow with forged brass ball (Machined to mirror smooth finsh with hard
chrome plated) and spindle with setting and gland of superior quality
having minimum working pressure of 10 kg/cm2 etc. complete in all
respect.
41 1.00 42.00 Each 2975.12 0.00
65 Providing and fixing 50 mm dia forged brass lever operated ball valve of
full flow with forged brass ball (Machined to mirror smooth finsh with hard
chrome plated) and spindle with setting and gland of superior quality
having minimum working pressure of 10 kg/cm2 etc. complete in all
respect.
26 1.00 27.00 Each 4403.00 0.00
66 Providing and fixing 65 mm dia C.I. butterfly valves of approved make ,
wafer end type class PN 1.6 as per I.S:13095 or with integrally moulded
linear of nitrile or EPDM, SS Disc and steam lever operated including
necessary nuts, bolts, gaskets, flanges etc., complete as directed by
Engineer-in-charge.
41 41.00 Each 3756.51 0.00
67 Providing and fixing 80 mm dia C.I. butterfly valves of approved make ,
wafer end type class PN 1.6 as per I.S:13095 or with integrally moulded
linear of nitrile or EPDM, SS Disc and steam lever operated including
necessary nuts, bolts, gaskets, flanges etc., complete as directed by
Engineer-in-charge.
4 4.00 Each 4010.83 0.00
68 Providing and fixing 100 mm dia C.I. butterfly valves of approved make ,
wafer end type class PN 1.6 as per I.S:13095 or with integrally moulded
linear of nitrile or EPDM, SS Disc and steam lever operated including
necessary nuts, bolts, gaskets, flanges etc., complete as directed by
Engineer-in-charge.
45 45.00 Each 5232.20 0.00
BOQ - 20
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
69 Providing and fixing 150 mm dia C.I. butterfly valves of approved make ,
wafer end type class PN 1.6 as per I.S:13095 or with integrally moulded
linear of nitrile or EPDM, SS Disc and steam lever operated including
necessary nuts, bolts, gaskets, flanges etc., complete as directed by
Engineer-in-charge.
1 1.00 Each 6928.00 0.00
70 Providing & fixing 65 mm dia Non return valve of approved make CI body
for PN 1.6 rating, conforming to IS:5312 complete in all respects.
Vertical
8 8.00 Each 3166.17 0.00
71 Providing & fixing 150 mm dia Non return valve of approved make CI
body for PN 1.6 rating, conforming to IS:5312 complete in all respects.
Vertical
2 2.00 Each 10932.64 0.00
72 Providing and Fixing 20 mm dia Pressure Reducing station for cold water
supply comprising of 2 Nos. of brass ball valves on outlet and bye-pass
and ball valve with inbuilt strainers and a PRV (Diaphram type) unit with
out going pressure gauge with flanged or union connection including
safety valve. The complete system is tested to a pressure not less than
15 Kg/Cm2 and suitable to reduce the pressure as per requirement
including flanges/unions, nuts, bolts and washers complete as required
for applications. (Horizontal or vertical as applicable).
BOQ - 21
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
74 Providing and Fixing 32 mm dia Pressure Reducing station for cold water
supply comprising of 2 Nos. of brass ball valves on outlet and bye-pass
and ball valve with inbuilt strainers and a PRV (Diaphram type) unit with
out going pressure gauge with flanged or union connection including
safety valve. The complete system is tested to a pressure not less than
15 Kg/Cm2 and suitable to reduce the pressure as per requirement
including flanges/unions, nuts, bolts and washers complete as required
for applications. (Horizontal or vertical as applicable).
BOQ - 22
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
78 Providing and Laying 25 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2
including all fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets,
access pieces etc. jointing with solvent cement complete. Rates includes
any type of fittings required for the provision of Garden Hydrant point in
main ring of the Hydrant pipe in different location complete in with
trenching, refilling and testing of joints complete as per direction of the
engineer in charge
BOQ - 23
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
82 Providing and Laying 63 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2
including all fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets,
access pieces etc. jointing with solvent cement complete. Rates includes
any type of fittings required for the provision of Garden Hydrant point in
main ring of the Hydrant pipe in different location complete in with
trenching, refilling and testing of joints complete as per direction of the
engineer in charge
BOQ - 24
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
86 Providing and Laying 160 OD uPVC water pipes (I.S:4985) of 10 Kg/cm2
including all fittings e.g. bends, junctions, elbow, f-tee, m-tee, offsets,
access pieces etc. jointing with solvent cement complete. Rates includes
any type of fittings required for the provision of Garden Hydrant point in
main ring of the Hydrant pipe in different location complete in with
trenching, refilling and testing of joints complete as per direction of the
engineer in charge
BOQ - 25
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
90 Constructing masonry Chamber 30x30x60 cm inside, in brick work in
cement mortar 1:4 (1 cement :4 coarse sand) for Garden hydrant, with DI
manhole cover heavy duty size 300x300mm (inside) with hinged cover &
lifting arrangement fixed in cement concrete slab 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c
necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine
sand : 10 graded stone 150mm thick aggregate 40mm nominal size ) and
inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand)
12mm thick, finished with a floating coat of neat cement complete as per
standard design :
BOQ - 26
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
93 Constructing masonry Chamber 120x120x100 cm inside, in brick work in
cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I.
surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm
deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c
necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand
: 10 graded stone aggregate 40 mm nominal size) and inside plastering
with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished
with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation
7.5
94 Providing and fixing 15 mm dia thermal insulation over hot water pipes in
chase having Japanese Red Oxide Primer Coat with 6mm thick Kaiflex,
nitrile or approved equivalent thermal insulation tubing, a elastomeric
flexible material having hermetic blister closed cell structure of expanded
synthetic rubber having density of 60-90 Kg/m3 over pipes of following
sizes including all required accessories complete as per Manufacture's
specifications and finishing complete in all respect as directed by
Engineer-in-charge.
BOQ - 27
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
96 Providing and fixing 25 mm dia thermal insulation over hot water pipes in
chase having Japanese Red Oxide Primer Coat with 6mm thick Kaiflex,
nitrile or approved equivalent thermal insulation tubing, a elastomeric
flexible material having hermetic blister closed cell structure of expanded
synthetic rubber having density of 60-90 Kg/m3 over pipes of following
sizes including all required accessories complete as per Manufacture's
specifications and finishing complete in all respect as directed by
Engineer-in-charge.
97 Providing and fixing 32 mm dia 750 mm long hot dipped G.I. Puddle
flanges for water tanks as per I.S. 1239 (Class C) with 6mm thick M.S.
Plate of suitable size and welded alround the pipe fixed in walls, beams
and top slab of R.C.C tanks, complete with all details in all respects and
as per drawing.
2 2.00 Each 1221.07 0.00
98 Providing and fixing 40 mm dia 750 mm long hot dipped G.I. Puddle
flanges for water tanks as per I.S. 1239 (Class C) with 6mm thick M.S.
Plate of suitable size and welded alround the pipe fixed in walls, beams
and top slab of R.C.C tanks, complete with all details in all respects and
as per drawing.
2 2.00 Each 1290.98 0.00
99 Providing and fixing 50 mm dia 750 mm long hot dipped G.I. Puddle
flanges for water tanks as per I.S. 1239 (Class C) with 6mm thick M.S.
Plate of suitable size and welded alround the pipe fixed in walls, beams
and top slab of R.C.C tanks, complete with all details in all respects and
as per drawing.
3 3.00 Each 1500.69 0.00
100 Providing and fixing 65 mm dia 750 mm long hot dipped G.I. Puddle
flanges for water tanks as per I.S. 1239 (Class C) with 6mm thick M.S.
Plate of suitable size and welded alround the pipe fixed in walls, beams
and top slab of R.C.C tanks, complete with all details in all respects and
as per drawing.
5 5.00 Each 1920.13 0.00
101 Providing and fixing 80 mm dia 750 mm long hot dipped G.I. Puddle
flanges for water tanks as per I.S. 1239 (Class C) with 6mm thick M.S.
Plate of suitable size and welded alround the pipe fixed in walls, beams
and top slab of R.C.C tanks, complete with all details in all respects and
as per drawing.
10 10.00 Each 2409.47 0.00
BOQ - 28
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
102 Providing and fixing 100 mm dia 750 mm long hot dipped G.I. Puddle
flanges for water tanks as per I.S. 1239 (Class C) with 6mm thick M.S.
Plate of suitable size and welded alround the pipe fixed in walls, beams
and top slab of R.C.C tanks, complete with all details in all respects and
as per drawing.
2 2.00 Each 2968.72 0.00
103 Providing and fixing 150 mm dia 750 mm long hot dipped G.I. Puddle
flanges for water tanks as per I.S. 1239 (Class C) with 6mm thick M.S.
Plate of suitable size and welded alround the pipe fixed in walls, beams
and top slab of R.C.C tanks, complete with all details in all respects and
as per drawing.
2 2.00 Each 3947.40 0.00
104 Providing and fixing 50 mm dia C.I. double acting air valve of approved
quality with bolts, nuts, rubber insertions etc. complete (The tail pieces,
tapers etc if required will be paid separately) : 5 5.00 Each 4662.45 23312.25
105 Providing & fixing 80 mm dia butterfly valve (with motorized actuator) of
rating PN 1.6, wafer type, in cast iron body with Ductile Iron disc, EPDM
seal, SS single piece shaft, conforming to IS-13095 of the following sizes
complete with cast iron hand level companion flanges, bolts, nuts,
washers & inserted rubber gaskets, as required and as per enclosed
specification, with single phase Electrical Actuator, of 15Nm- 400Nm
Torque, made of aluminium alloy (resistant to heat, acid , alkali,
corrosion), and weather proof heavy duty motor, with stabilized start
speed to effectively avoid water hammering, with waterproofing seal (IP
67) for all housing seals, low noise level, built –in thermal protection
complete as per approved type and specifications as per instructions of
the engineer - in - charge.
BOQ - 29
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
106 Providing & fixing 100 mm dia butterfly valve (with motorized actuator) of
rating PN 1.6, wafer type, in cast iron body with Ductile Iron disc, EPDM
seal, SS single piece shaft, conforming to IS-13095 of the following sizes
complete with cast iron hand level companion flanges, bolts, nuts,
washers & inserted rubber gaskets, as required and as per enclosed
specification, with single phase Electrical Actuator, of 15Nm- 400Nm
Torque, made of aluminium alloy (resistant to heat, acid , alkali,
corrosion), and weather proof heavy duty motor, with stabilized start
speed to effectively avoid water hammering, with waterproofing seal (IP
67) for all housing seals, low noise level, built –in thermal protection
complete as per approved type and specifications as per instructions of
the engineer - in - charge.
108 Providing, fixing and testing, double flanged 50 mm dia Water Flow
Meter complete with digital display provision & including Pulse generator
and Remote Totalizer complete in all respect as per manufacturers
specification, instructions and approval as per engineer incharge.
1 1.00 Each 21645.82 0.00
109 Providing, fixing and testing, double flanged 65 mm dia Water Flow Meter
complete with digital display provision & including Pulse generator and
Remote Totalizer complete in all respect as per manufacturers
specification, instructions and approval as per engineer incharge.
8 8.00 Each 24137.52 0.00
TOTAL SUB HEAD -III 5622132.73
BOQ - 30
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
IV EXTERNAL SEWERAGE AND DRAINAGE SYSTEM
1
3
Extra for excavating trenches for pipes, cables, etc. in All Kinds soil
exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over
corresponding basic item for depth upto 1.5 metre).
All Kinds of Soil
Pipes, cables etc., exceeding 80mm dia but not exceeding 300mm dia 1320.00 1320.00 Metre 286.32 377944.38
4
Extra for excavating trenches for pipes, cables, etc. in All Kinds soil
exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over
corresponding basic item for depth upto 1.5 metre).
All Kinds of Soil
Pipes, cables etc., exceeding 300mm dia but not exceeding 600mm dia 575.00 575.00 Metre 447.04 257048.00
BOQ - 31
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
5
Extra for excavating trenches for pipes, cables, etc. in All Kinds soils
exceeding 3 m in depth but not exceeding 4.5 m. (Rate is over
corresponding basic item for depth upto 1.5 metre).
All Kinds of Soil
Pipes, cables etc., exceeding 300mm dia but not exceeding 600mm dia 525.00 525.00 Metre 1108.80 582120.00
6 Providing and laying 200 mm dia non-pressure NP3 class R.C.C. pipes
with collars jointed with stiff mixture of cement mortar in the proportion of
1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.
600.00 600.00 metre 700.97 0.00
7 Providing and laying 250 mm dia non-pressure NP3 class R.C.C. pipes
with collars jointed with stiff mixture of cement mortar in the proportion of
1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.
200.00 200.00 metre 845.83 0.00
8 Providing and laying 300 mm dia non-pressure NP3 class R.C.C. pipes
with collars jointed with stiff mixture of cement mortar in the proportion of
1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.
50.00 50.00 metre 1037.15 0.00
9 Providing and laying 400 mm dia non-pressure NP3 class R.C.C. pipes
with collars jointed with stiff mixture of cement mortar in the proportion of
1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.
280.00 280.00 metre 1944.46 0.00
10 Providing and laying 500 mm dia non-pressure NP3 class R.C.C. pipes
with collars jointed with stiff mixture of cement mortar in the proportion of
1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.
270.00 270.00 metre 2429.44 0.00
11 Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8
graded stone aggregate 40 mm nominal size) all-round RCC/HDPE.
pipes including bed concrete as per standard design for 150 mm dia pipe
BOQ - 32
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
13 Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8
graded stone aggregate 40 mm nominal size) all-round RCC/HDPE.
pipes including bed concrete as per standard design for 250 mm dia pipe
BOQ - 33
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
20 Providing and laying 250 mm ODHigh density Polythene (HDPE Pipes)
material grade PE - 80, working pressure rating PN 4 (0.4 maximum
permissible working pressure) confirming IS - 14333 jointed by Butt
welding method including testing of joints etc. complete
BOQ - 34
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
26 Providing and fixing square-mouth S.W. gully trap class SP-1 complete
with C.I. grating brick masonry chamber with water tight C.I. cover with
frame of 300 x300 mm size (inside) the weight of cover to be not less
than 4.50 kg and frame to be not less than 2.70 kg as per standard
design ::
180 x 150 mm size P type With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
5.00 5.00 Each 1706.55 8532.75
27 Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4
coarse sand) with RCC Top slab with 1:2:4 mix (1 cement : 2 coarse
sand: 4 graded stone aggregate 20mm nominal size) foundation concrete
1:4:8 mix ( 1 cement :4 coarse sand: 8 graded stone aggregate 40
nominal size), inside plastering 12mm thick with cement mortar 1:3 ( 1
cement : 3 coarse sand), finished with a floating coat of neat cement and
making channels in cement concrete 1:2:4 mix (1 cement : 2 coarse sand
: 4 graded stone aggregate 20mm nominal size) finished with a floating
coat of neat cement complete as per standard design .
'Inside size 90x80 cms and 45cms deep including Ductile Iron
cover( D.I.) and frame(Heavy duty) 610x455mm internal dimensions
total weight of cover and frame to be not less then 38 kg (wt. of cover 23
kg and weight of frame 15 kg)
With common burnt clay FPS(non modular) bricks of class designation
7.5
BOQ - 35
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
28 Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4
coarse sand) with RCC Top slab with 1:2:4 mix (1 cement : 2 coarse
sand: 4 graded stone aggregate 20mm nominal size) foundation concrete
1:4:8 mix ( 1 cement :4 coarse sand: 8 graded stone aggregate 40
nominal size), inside plastering 12mm thick with cement mortar 1:3 ( 1
cement : 3 coarse sand), finished with a floating coat of neat cement and
making channels in cement concrete 1:2:4 mix (1 cement : 2 coarse sand
: 4 graded stone aggregate 20mm nominal size) finished with a floating
coat of neat cement complete as per standard design .
'Inside size 120x90 cm and 90 cm deep including D.I. cover and
frame(Heavy duty) 500 mm internal diameter, total weight of cover and
frame to be not less than 116 kg (weight of cover 58 kg and weight of
frame 58 kg) :
With common burnt clay FPS(non modular) bricks of class designation
7.5
BOQ - 36
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
31 Constructing Brick Masonry circular type manhole 0.91 m internal dia at
bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 Coarse
sand), inside cement plaster 12mm thick with cement mortar 1:3 ( 1
cement : 3 coarse sand) finished with a floating coat of neat cement,
foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded
stone aggregate 40mm nominal size) and making necessary channel in
Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone
aggregate 20mm nominal size) finished with a floating coat of neat
cement all complete as per standard design. External surface shall be
finished with 15mm thick cement plaster 1:6 ( 1 cement : 6 Coarse sand)
as per side conditions.
0.91m deep with Ductile Iron cover( D.I.) and frame(Heavy duty) and
frame (heavy duty HD-20 grade designation) 560mm internal diameter
conforming to I.S:12592, total weight of cover and frame to be not less
than 182Kg. fixed in cement concrete 1:2:4 mix (1 Cement: 2 Coarse
sand: 4 Graded stone aggregate 20mm nominal size) including centering,
shuttering all complete.
With common burnt clay FPS(non modular) bricks of class designation
7.5
BOQ - 37
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
33 Constructing Brick Masonry circular manhole 1.22 m internal dia at
bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 Coarse
sand), cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3
coarse sand) finished with a floating coat of neat cement, foundation
concrete 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone
aggregate 40 mm nominal size) and making necessary channel in
Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone
Aggregate 20mm nominal size) finished with a floating coat of neat
cement all complete as per standard design. External surface shall be
finished with 15mm thick cement plaster 1:6 ( 1 cement : 6 Coarse sand)
as per side conditions.
1.68m deep with Ductile Iron cover( D.I.) and frame (heavy duty HD-20
grade designation) 560mm internal diameter conforming to I.S:12592,
total weight of cover and frame to be not less than 182Kg. fixed in
cement concrete 1:2:4 mix (1cement: 2 coarse sand: 4 graded stone
aggregate 20mm nominal size) including centering, shuttering all
complete.
BOQ - 38
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
35 Constructing Brick Masonry circular manhole 1.52 m internal dia at
bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 Coarse
sand), inside cement plaster 12mm thick with cement mortar 1:3 ( 1
cement : 3 coarse sand) finished with a floating coat of neat cement,
foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded
stone aggregate 40 mm nominal size) and making necessary
channel in Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4
Graded Stone Aggregate 20mm nominal size) finished with a floating
coat of neat cement all complete as per standard design .External
surface shall be finished with 15mm thick cement plaster 1:6 ( 1 cement :
6 Coarse sand) as per side conditions.
2.30m deep with Ductile Iron cover( D.I.) and frame (heavy duty HD-20
grade designation) 560mm internal diameter conforming to I.S:12592,
total weight of cover and frame to be not less than 182Kg. fixed in
cement concrete 1:2:4 mix (1cement: 2 coarse sand: 4 graded stone
aggregate 20mm nominal size) including centering, shuttering all
complete.
With common burnt clay FPS(non modular) bricks of class designation
7.5
BOQ - 39
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
37 Providing & fixing orange colour safety foot rest of minimum 6mm thick
plastic encapsulated as per I.S:10910 on 12 mm dia steel bar conforming
to I.S:1786 having minimum cross section as 23mm x 25mm and over all
minimum length 263mm and width as 165mm with minimum 165 mm
space between protruded legs having 2mm tread on top surface by
ribbing or chequering besides necessary and adequate anchoring
projections on tail length on 138mm as per standard drawing and suitable
to with stand the bend test and chemical resistance test as per
specifications and having manufacturer's permanent identification mark
to be visible even after fixing, including fixing in manholes with
30x20x15cm cement concrete block 1:3:6 (1 cement: 3 coarse sand: 6
graded stone aggregate 20mm nominal size) complete as per design.
BOQ - 40
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
41 Construction of Grease trap of size 2 m x1 m (Internal) with effective
depth of 1 m with Brick Masonry in Cement 1:4 (1 Cement: 4 Coarse
sand) over a bed of 150 mm thick PCC 1:5:10 (1 Cement: 5 Coarse
sand: 10 graded stone aggregate 40 mm nominal size) including a
baffle wall of Brick work, covered with RCC slab of 150 mm thickness, of
1:2:4 mix (1 Cement: 2 Coarse sand: 4 graded stone aggregate of 20 mm
nominal size) including centering, shuttering and reinforcement complete
with providing and fixing Foot rests @300 mm C to C with Two 600x600
mm D.I. Manhole Covers with Lifting arrangement, including 150 mm dia
Inlet & Outlet pipes complete .
BOQ - 41
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
V TUBEWELL (8 NOS)
Boring/drilling bore well of required dia for casing/ strainer pipe, by
suitable method prescribed in IS: 2800 (part I), including collecting
samples from different strata, preparing and submitting strata chart/ bore
log, including hire & running charges of all equipments, tools, plants &
machineries required for the job, all complete as per direction of Engineer
1.00 -in-charge, beyond 90 m & upto 150 metre depth below ground level. Metre
All types of soil
500 mm dia
BOQ - 42
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
Providing and fixing 200 mm dia M.S. clamp of required dia to the top of
7 casing/housing pipe of tubewell as per IS: 2800 (part I), including Each
necessary bolts & nuts of required size complete. 8 8.00 1154.45 9235.60
Providing and fixing 200 mm dia Bail plug/ Bottom plug of required dia to
8 the bottom of pipe assembly of tubewell as per IS:2800 (part I). Each
8 8.00 253.95 2031.60
BOQ - 43
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
1.00 Boring/drilling bore well of required dia for casing/ strainer pipe, by
suitable method prescribed in IS: 2800 (part I), including collecting
samples from different strata, preparing and submitting strata chart/ bore
log, including hire & running charges of all equipments, tools, plants &
machineries required for the job, all complete as per direction of Engineer 3840.00 3840.00 Metre 632.45 2428608.00
-in-charge, beyond 90 m & upto 150 metre depth below ground level.
All types of soil
500 mm dia
BOQ - 44
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
6 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm
to 2 mm in recharge pit, in required thickness over gravel layer, for all
leads & lifts, all complete as per direction of Engineer -in-charge.
256.00 256.00 Cum 1038.05 265740.80
BOQ - 45
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
12 Providing and fixing 200 mm dia Bail plug/ Bottom plug of required dia
to the bottom of pipe assembly of tubewell as per IS:2800 (part I).
32.00 32.00 Each 253.95 8126.40
13 Earth work in excavation by mechanical means (Hydraulic excavator)
/manual means in foundation trenches or drains (not exceeding 1.5 m in
width or 10 sqm on plan), including dressing of sides and ramming of
bottoms, lift upto 1.5 m, including getting out the excavated soil and
disposal of surplus excavated soil as directed, within a lead of 50 m. All
Kinds of soil
6400.00 6400.00 Cum 166.40 1064960.00
20 Centering and shuttering including strutting, propping etc. and removal of 748.80 Sqm 193.95
form for all heights : Foundations, footings, bases of columns, etc. for
mass concrete 748.80 145229.76
BOQ - 46
ITEM Terminal Service Total RATE AMOUNT
DESCRIPTION OF ITEM UNIT
NO buildng qty yard qty quantity DSR NON DSR DSR
21 Steel reinforcement for R.C.C. work including straightening, cutting,
bending, placing in position and binding all complete upto plinth level.
Cold twisted bars 17920.00 17920.00 Kg 56.60 1014272.00
22 Construction of brick masonry desilting chamber of size 200x100x60cm
(effective depth) before rainy well with 75 class designation bricks in
cement mortar 1:4 (1 cement : 4 coarse sand) , foundation concrete 1:4:8
mix (1 cement : 4 coarse sand; 8 graded stone aggregate 40mm nominal
size), inside and outside plastering 12mm thick with cement mortar 1:3 (1
cement : 3 coarse sand), finished with a floating coat of neat cement
inside and rough plaster on outside, including fixing of grating , neatly
finished complete in all respects including neccessary excavation,
refilling and disposal of surplus earth, complete as per attached Sketch.
BOQ - 47
AMOUNT REFEREN
NON DSR CE
2330195.00 MR
2249345.00 MR
1192508.00 MR
BOQ - 48
AMOUNT REFEREN
NON DSR CE
1100963.00 MR
1213278.68 MR
0.00 8.10.2
DSR
0.00 17.9.1
BOQ - 49
AMOUNT REFEREN
NON DSR CE
47072.20 MR
146159.98 MR
205673.06 MR
6104.13 MR
199358.73 MR
932851.09 MR
BOQ - 50
AMOUNT REFEREN
NON DSR CE
484925.39 MR
937095.92 MR
224286.84 MR
136828.37 MR
202952.79 MR
19815.29 MR
3349.33 MR
BOQ - 51
AMOUNT REFEREN
NON DSR CE
5737.21 MR
0.00 18.52
56932.10 MR
228693.03 MR
386899.52 MR
165817.34 MR
34409.86 MR
BOQ - 52
AMOUNT REFEREN
NON DSR CE
2776671.38 MR
649128.40 MR
15937051.63
BOQ - 53
AMOUNT REFEREN
NON DSR CE
376129.32 MR
1118169.42
7449324.33
BOQ - 54
AMOUNT REFEREN
NON DSR CE
5532393.94
0.00 17.35.1.3
0.00 17.37.1
0.00 17.38.1.3
0.00 17.39.1.3
0.00 17.44.1.3
0.00 17.42.1.3
0.00 17.55.1.2
0.00 17.56.1.3
BOQ - 55
AMOUNT REFEREN
NON DSR CE
0.00 17.57A.1
0.00 17.59.1
0.00 17.60.1.3
330091.06 MR
0.00 18.10.4
0.00 18.10.5
0.00 18.10.6
0.00 18.40.4
0.00 18.40.5
BOQ - 56
AMOUNT REFEREN
NON DSR CE
0.00 18.40.6
1204009.10 MR
956115.77 MR
911406.37 MR
908726.42 MR
283498.04 MR
49094.76 MR
4407042.79 MR
BOQ - 57
AMOUNT REFEREN
NON DSR CE
459933.31 MR
23985934.62
BOQ - 58
AMOUNT REFEREN
NON DSR CE
0.00 2.10.1.1
0.00 2.10.1.2
57497.00 MR
39569.38 MR
187249.98 MR
BOQ - 59
AMOUNT REFEREN
NON DSR CE
382200.00 MR
503492.33 MR
200704.93 MR
3984440.96 MR
2517731.84 MR
176387.93 MR
185819.14 MR
41984.36 MR
1048081.30 MR
0.00 18.8.1
BOQ - 60
AMOUNT REFEREN
NON DSR CE
0.00 18.8.2
0.00 18.8.3
0.00 18.8.4
776622.28 MR
BOQ - 61
AMOUNT REFEREN
NON DSR CE
402967.14 MR
183577.52 MR
96795.37 MR
759312.60 MR
BOQ - 62
AMOUNT REFEREN
NON DSR CE
157241.45 MR
150287.16 MR
506307.41 MR
3277638.16 MR
0.00 18.72.15
BOQ - 63
AMOUNT REFEREN
NON DSR CE
0.00 18.72.16
0.00
0.00 18.70.1
0.00 18.70.2
0.00 18.69.1
0.00 18.46.3
0.00 18.46.4
0.00 18.46.5
0.00 18.46.6
0.00 18.46.7
0.00 18.46.8
BOQ - 64
AMOUNT REFEREN
NON DSR CE
962668.60 MR
969523.72 MR
0.00 18.40.6
0.00 18.40.7
0.00 18.40.8
0.00 Derived
0.00 18.38.3
0.00 18.38.4
0.00 18.38.5
0.00 18.38.6
BOQ - 65
AMOUNT REFEREN
NON DSR CE
0.00 Derived
0.00 Derived
0.00 Derived
0.00 Derived
0.00 18.41.4
0.00 18.41.5
0.00 18.41.6
0.00 18.41.7
0.00 18.41.8
0.00 18.41.9
0.00 18.41.10
6373.35 MR
BOQ - 66
AMOUNT REFEREN
NON DSR CE
120268.43 MR
112046.65 MR
124954.85 MR
118881.11 MR
154016.87 MR
16043.33 MR
235448.94 MR
BOQ - 67
AMOUNT REFEREN
NON DSR CE
6928.00 MR
25329.32 MR
21865.28 MR
12520.61 MR
22370.79 MR
BOQ - 68
AMOUNT REFEREN
NON DSR CE
31163.83 MR
90570.53 MR
57596.22 MR
18673.42 MR
BOQ - 69
AMOUNT REFEREN
NON DSR CE
85214.18 MR
787932.36 MR
130100.03 MR
372908.90 MR
BOQ - 70
AMOUNT REFEREN
NON DSR CE
1128135.98 MR
125795.48 MR
2192255.75 MR
6171841.87 MR
BOQ - 71
AMOUNT REFEREN
NON DSR CE
922488.81 MR
0.00 4.1.3
0.00 4.3.1
0.00 18.32.1
BOQ - 72
AMOUNT REFEREN
NON DSR CE
0.00 Derived
0.00 18.33.1
82899.25 18.34.1
BOQ - 73
AMOUNT REFEREN
NON DSR CE
0.00 18.35.1
4345.36 MR
6709.98 MR
BOQ - 74
AMOUNT REFEREN
NON DSR CE
4622.61 MR
MR
2442.14 MR
2581.95 MR
4502.08 MR
9600.64 MR
24094.70 MR
BOQ - 75
AMOUNT REFEREN
NON DSR CE
5937.44 MR
7894.80 MR
0.00 18.59.1
92606.37
BOQ - 76
AMOUNT REFEREN
NON DSR CE
97201.14
5883.17
21645.82
193100.12
31225893.00
BOQ - 77
AMOUNT REFEREN
NON DSR CE
0.00 2.10.1.2
0.00 2.10.1.3
0.00 2.11
0.00 2.11
BOQ - 78
AMOUNT REFEREN
NON DSR CE
0.00 2.12
420580.96 MR
169166.54 MR
51857.38 MR
544449.75 MR
655949.98 MR
124988.46 MR
1423114.22 MR
BOQ - 79
AMOUNT REFEREN
NON DSR CE
548195.00 MR
460483.80 MR
767473.00 MR
192416.45 MR
954681.59 MR
157318.97 MR
2944152.35 MR
BOQ - 80
AMOUNT REFEREN
NON DSR CE
516734.00 MR
1079736.04 MR
822740.58 MR
771638.40 MR
1414065.32 MR
0.00 19.4.2.1
BOQ - 81
AMOUNT REFEREN
NON DSR CE
0.00 19.4.3.1
0.00 19.7.1.1
BOQ - 82
AMOUNT REFEREN
NON DSR CE
0.00 19.7.2.1
0.00 19.8.1.1
0.00 19.8.2.1
BOQ - 83
AMOUNT REFEREN
NON DSR CE
0.00 19.9.1.1
0.00 19.10.1
BOQ - 84
AMOUNT REFEREN
NON DSR CE
0.00 19.11.1.1
0.00 19.12.1
BOQ - 85
AMOUNT REFEREN
NON DSR CE
0.00 19.13.1.1
0.00 19.14.1
BOQ - 86
AMOUNT REFEREN
NON DSR CE
0.00 19.16
0.00 19.28.1
0.00 19.27.1
0.00 19.29.1
BOQ - 87
AMOUNT REFEREN
NON DSR CE
198291.57 MR
0.00 10.25
0.00 10.25.2
128705.17 MR
1452105.21 MR
15798844.73
BOQ - 88
AMOUNT REFEREN
NON DSR CE
Derived
from DSR
0.00
23.3.3
0.00
23.4.3
0.00
23.8
0.00
BOQ - 89
AMOUNT REFEREN
NON DSR CE
23.12
0.00
23.13.3
0.00
23.14.3
0.00
23.15.3
0.00
BOQ - 90
AMOUNT REFEREN
NON DSR CE
Derived
0.00
from DSR
0.00 23.3.3
0.00 23.4.3
0.00 23.5
0.00 23.6
BOQ - 91
AMOUNT REFEREN
NON DSR CE
0.00 23.7
0.00 23.8
0.00 23.9
0.00 23.12
0.00 23.13.3
23.14.3
0.00
BOQ - 92
AMOUNT REFEREN
NON DSR CE
0.00 23.15.3
0.00 2.8.1
0.00 2.25
0.00 2.26.1
0.00 4.1.6
0.00 6.1.1
0.00 5.13
0.00 13.7.1
5.9.1
0.00
BOQ - 93
AMOUNT REFEREN
NON DSR CE
0.00 5.22.3
1555520.00 MR
1555520.00
BOQ - 94
BASIC RATES
S.No. DSR Ref Description of Rate Unit DSR Rate Rate-1 Rate-2
LABOUR:
1 0100 Bandhani Day 593.00
2 0101 Bhisti Day 593.00
3 0102 Blacksmith 1st class Day 710.00
4 0103 Blacksmith 2nd class Day 653.00
5 0111 Carpenter 1st class Day 710.00
6 0112 Carpenter 2nd class Day 653.00
7 0113 Chowkidar Day 536.00
8 0114 Beldar Day 536.00
9 0115 Coolie Day 536.00
10 0116 Fitter (grade 1) Day 710.00
11 0117 Assistant Fitter or 2nd class Fitter Day 653.00
12 0119 Glazier Day 710.00
13 0122 Mason (for plaster of paris work) 1st class Day 710.00
14 0123 Mason (brick layer) 1st class Day 710.00
15 0124 Mason (brick layer) 2nd class Day 653.00
16 0125 Mason (for plain stone work) 2nd class) Day 693.00
17 Mason (for ornamental stone work) 1st class Day
0126 710.00
18 0128 Mate Day 593.00
19 0130 Mistry Day 710.00
20 0131 Painter Day 653.00
21 0138 Sprayer (for bitumen, tar etc.) Day 653.00
22 0139 Skilled Beldar (for floor rubbing etc.) Day 593.00
23 0155 Mason (average) Day 681.50
24 0156 Carpenter (average) Day 681.50
25 0157 Operator (Pile/ Special machine) Day 593.00
26 9999 Sundries 1.73
MACHINERY
27 0013 Machine for rubbing of floors Day 350.00
28 0018 Hire and running charges of Loader Day 6000.00
29 Hydraulic excavator (3D) with driver and fuel Day
0020 6500.00
MATERIALS : Shalimar
30 Stone Aggregate (Single size) : 40 mm nominal cum
size with 5% GST
0293 1250.00 2096.00
31 Stone Aggregate (Single size) : 20 mm nominal cum
size with 5% GST
0295 1300.00 2212.00
32 Stone Aggregate (Single size) : 10 mm nominal cum
size with 5% GST
0297 1300.00 2048.00
33 0367 Portland Cement tonne 5700.00
34 0368 White Cement tonne 11200.00 14600.00
35 0451 Brass screws 30 mm 100 Nos 140.00
36 0586 Chromium plated Brass screws 40 mm 100 Nos 310.00
37 0982 Coarse sand (zone III) cum 1200.00 3490.00
S.No. DSR Ref Description of Rate Unit DSR Rate Rate-1 Rate-2
38 0983 Fine sand (zone IV) cum 760.00 1060.00
39 1159 Stone dust cum 865.00 2484.00
40 Cutting marble or sand stone slab up to 50 mm metre
thick by mechanical device
1237 10.00
41 Common burnt clay F.P.S.( non modular) bricks 1000 Nos
tile class designation 10
1984 5200.00
42 2209 Carriage of white Cement tonne 92.24
43 2209 Carriage of white Cement tonne 92.24
NON-DSR
44 European Water Closet Each 9340.00 8910.00
45 In wall Concealed Cistern Each 6810.00 6120.00
45 Wash Basin Each 8090.00 2140.00
46 Urinal Each 7900.00 16180.00
46 Flushing system Urinal Each 18490.00 7000.00
47 Stainless steel sink double bowl single drain board Each 11180.00 12717.00
47 Shortbody Bib cock Each 2360.00 690.00
48 Long body Bib cock Each 1190.00 960.00
48 CP Brass Towel rail Each 6450.00 1100.00
49 CP Brass Towel ring Each 1180.00 760.00
49 SS Liquid soap dispenser Each 19993.00 3220.00
50 CP Brass bottle trap Each 1610.00 1150.00
50 C.P. brass angle valve Each 1160.00 1125.00
51 Jumbo toilet paper holder Each 3790.00 469.00
51 S.S. body tissue paper dispenser Each 1320.00 3600.00
52 Health Faucet Each 2750.00 970.00
52 Divertor Each 3995.00 4020.00
53 Shower Head with shower arm Each 14710.00 790.00
53 Bath spout Each 4120.00 1080.00
54 Grab bar Each 5150.00 1610.00
54 Sliding rail Each 6565.00 6640.00
55 WC Pan connector Each 1080.00 1160.00
55 Double coat hook Each 895.00 390.00
56 Sink Mixer Each 6560.00 3440.00
56 Automatic sensor faucet for cold water Each 19200.00 7890.00
57 Aerosol perfume dispenser Each 2180.00 1400.00
57 M.S. Pipe 150 mm dia Metre 1209.00 1180.60
58 M.S. Pipe 200 mm dia Metre 1616.02 1877.00
58 M.S. Pipe 250 mm dia Metre 2025.85 2354.00
59 M.S. Pipe 300 mm dia Metre 2411.42 2804.00
59 Reducing elbow Each 1160.00 1310.00
60 G.I. Pipe (Medium duty) 100 mm dia Each 1150.00 867.45
60 SS Grating Each 600.00 700.00
61 Dome Grating 250 mm dia Each 19500.00 20000.00
61 Dome Grating 300 mm dia Each 25000.00 27000.00
62 Cleanout plug 100 mm dia Each 600.00 590.00
62 Cleanout plug 150 mm dia Each 950.00 945.00
63 G.I. Socket 100 mm dia Each 667.00 660.00
S.No. DSR Ref Description of Rate Unit DSR Rate Rate-1 Rate-2
63 G.I. Socket 150 mm dia Each 1389.00 1350.00
64 Drip seal Kg 225.00 225.00
64 C.I. 3989 150 mm dia Hubless Each 1480.00
65 G.I. Pipe Class 25 mm dia Each 339.00 216.30
65 G.I. Pipe Class 32 mm dia Each 364.00 279.80
66 G.I. Pipe Class 40 mm dia Each 415.00 322.90
66 G.I. Pipe Class 50 mm dia Each 591.00 447.40
67 G.I. Pipe Class 65 mm dia Each 739.00 563.55
67 G.I. Pipe Class 80 mm dia Each 941.00 704.40
68 G.I. Pipe Class 100 mm dia Each 1356.00 1010.90
68 G.I. Pipe Class 150 mm dia Each 2006.00 1511.00
69 CPVC Pipe 40 mm dia Each 338.50 300.00
69 CPVC Pipe 50 mm dia Each 563.50 500.00
70 CPVC Pipe 65 mm dia (Schedule 40) Each 968.50 888.33
70 SS 316 Pipe 22 mm dia Each 908.00 585.00
71 SS 316 Pipe 35 mm dia Each 1656.00 1178.00
71 SS 316 Pipe 42 mm dia Each 2034.00 1425.00
72 SS 316 Pipe 54 mm dia Each 2622.00 1846.00
72 SS 316 Pipe 75 mm dia Each 5305.00 3474.00
73 SS 316 Pipe 90 mm dia Each 6142.00 4074.00
73 G.I. Union 100 mm dia Each 1570.00 1820.00
74 G.I. Union 150 mm dia Each 4570.00
74 Ball valve 15 mm dia Each 335.00 320.00
75 Ball valve 20 mm dia Each 462.00 455.00
75 Ball valve 25 mm dia Each 718.00 704.00
76 Ball valve 32 mm dia Each 1226.00 1216.00
76 Ball valve 40 mm dia Each 1785.00 1730.00
77 Ball valve 50 mm dia Each 2563.00 2527.00
77 Butterfly valve 65 mm dia Each 1656.00 2301.00
S.No. DSR Ref Description of Rate Unit DSR Rate Rate-1 Rate-2
78 Butterfly valve 80 mm dia Each 1841.00 2795.00
78 Butterfly valve 100 mm dia Each 2303.00 3457.00
79 Butterfly valve 150 mm dia Each 3817.00 5260.00
79 Non-return valve 65 mm dia Each 4970.00 3766.00
80 Non-return valve 150 mm dia Each 16430.00 12921.00
80 Pressure reducing valve 20 mm dia Each 1795.00 1566.00
81 Pressure reducing valve 25 mm dia Each 3266.00 2798.00
81 Pressure reducing valve 32 mm dia Each 4020.00 3508.00
82 Pressure reducing valve 40 mm dia Each 4550.00 4248.00
82 Pressure reducing valve 50 mm dia Each 6520.00 5894.00
83 Pressure reducing valve 65 mm dia Each 12052.00 10510.00
83 uPVC water pipe 25 mm dia Each 44.17 31.20
84 uPVC water pipe 32 mm dia Each 72.67 51.30
84 uPVC water pipe 40 mm dia Each 109.00 76.95
85 uPVC water pipe 50 mm dia Each 169.50 119.70
85 uPVC water pipe 63 mm dia Each 250.83 182.45
86 uPVC water pipe 75 mm dia Each 358.00 261.45
86 uPVC water pipe 90 mm dia Each 511.33 372.95
87 uPVC water pipe 110 mm dia Each 763.00 555.85
87 uPVC water pipe 160 mm dia Each 1608.33 1171.35
88 Thermal insulation 15 mm dia Each 42.00 45.00
88 Thermal insulation 20 mm dia Each 48.00 50.00
89 Thermal insulation 25 mm dia Each 55.00 55.00
89 Puddle flange 32 mm dia Each 750.00 800.00
90 Puddle flange 40 mm dia Each 800.00 900.00
90 Puddle flange 50 mm dia Each 950.00 1000.00
91 Puddle flange 65 mm dia Each 1250.00 1300.00
91 Puddle flange 80 mm dia Each 1600.00 1700.00
92 Puddle flange 100 mm dia Each 2000.00 2100.00
92 Puddle flange 150 mm dia Each 2700.00 2900.00
93 Butterfly valve with Motorized Actuator 80 mm dia Each 12077.00 13568.00
93 Butterfly valve with Motorized Actuator 100 mm dia Each 16390.00 19017.00
94 insect proof coupling 100 mm dia Each 800.00 850.00
94 Water flow meter 50 mm dia Each 27500.00 15100.00
95 Water flow meter 65 mm dia Each 28500.00 16900.00
95 NP3 RCC Pipe 200 mm dia Each 480.00 335.00
96 NP3 RCC Pipe 250 mm dia Each 530.00 450.00
96 NP3 RCC Pipe 300 mm dia Each 840.00 625.00
97 NP3 RCC Pipe 400 mm dia Each 1440.00 1315.00
97 NP3 RCC Pipe 500 mm dia Each 2160.00 1700.00
98 HDPE Pipe 160 mm dia Each 1245.00 762.50
98 HDPE Pipe 225 mm dia Each 2450.00 1497.50
99 HDPE Pipe 250 mm dia Each 3020.00 1845.50
99 HDPE Pipe 350 mm dia Each 6069.00 3704.00
100 HDPE Pipe 400 mm dia Each 7776.00 4796.00
100 HDPE Pipe 450 mm dia Each 9636.00 6176.50
101 HDPE Pipe 500 mm dia Each 12194.00 7615.50
S.No. DSR Ref Description of Rate Unit DSR Rate Rate-1 Rate-2
101 D.I. Manhole cover 600x600 mm Each 11170.00
102 D.I. Medium duty 560 mm dia Each 124.18
102 M.S. Grating Each 90.00 100.00
Rate-3 Lowest Rate
593.00
593.00
710.00
653.00
710.00
653.00
536.00
536.00
536.00
710.00
653.00
710.00
710.00
710.00
653.00
693.00
710.00
593.00
710.00
653.00
653.00
593.00
681.50
681.50
593.00
1.73
350.00
6000.00
6500.00
2200.80
2322.60
2150.40
5700.00
14600.00
140.00
310.00
3664.50
Rate-3 Lowest Rate
1113.00
2608.20
10.00
5200.00
92.24
92.24
9810.00 8910.00
5180.00 5180.00
1790.00 1790.00
6250.00 6250.00
6960.00 6960.00
11180.00
1050.00 690.00
1205.00 960.00
1045.00 1045.00
740.00 740.00
2300.00 2300.00
1160.00 1150.00
890.00 890.00
469.00
2800.00 1320.00
1320.00 970.00
3170.00 3170.00
2990.00 790.00
910.00 910.00
1240.00 1240.00
9950.00 6565.00
1080.00
400.00 390.00
3050.00 3050.00
7670.00 7670.00
1400.00
1021.28 1021.28
1600.00 1600.00
2000.00 2000.00
2411.42
1177.00 1160.00
748.99 748.99
800.00 600.00
25000.00 19500.00
28000.00 25000.00
620.00 590.00
1020.00 945.00
750.00 660.00
Rate-3 Lowest Rate
1450.00 1350.00
225.00
1480.00
159.84 159.84
207.80 207.80
245.48 245.48
329.97 329.97
424.73 424.73
522.92 522.92
748.99 748.99
1115.73 1115.73
295.90 295.90
503.40 503.40
798.75 798.75
575.00 575.00
1175.00 1175.00
1420.00 1420.00
1840.00 1840.00
3474.00
4074.00
1626.00 1570.00
4092.00 4092.00
315.00 315.00
432.00 432.00
684.00 684.00
1161.00 1161.00
1638.00 1638.00
2430.00 2430.00
1710.00 1656.00
Rate-3 Lowest Rate
1890.00 1841.00
2430.00 2303.00
3420.00 3420.00
4300.00 3766.00
9835.00 9835.00
2750.00 1566.00
2914.00 2798.00
5315.00 3508.00
6596.00 4248.00
10280.00 5894.00
15209.00 10510.00
43.96 31.20
69.74 51.30
102.17 76.95
159.99 119.70
251.56 182.45
356.86 261.45
509.01 372.95
764.84 555.85
1668.90 1171.35
53.00 42.00
65.00 48.00
68.00 55.00
850.00 750.00
950.00 800.00
1050.00 950.00
1280.00 1250.00
1650.00 1600.00
2070.00 2000.00
3000.00 2700.00
12076.00 12076.00
12420.00 12420.00
975.00 800.00
75000.00 15100.00
80000.00 16900.00
335.00
450.00
625.00
1315.00
1700.00
657.13 657.13
1290.80 1290.80
1590.75 1590.75
3139.23 3139.23
4725.00 4725.00
5985.00 5985.00
7379.40 7379.40
Rate-3 Lowest Rate
11170.00
124.18
150.00 90.00
Pluming Rate Analysis
1.00 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and
urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the c
with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as p
in-charge and finished smooth.
Granite Stone of approved shade (Refer DSR-2016 Item No. 17.78 DAR 2016 Vol-II Page No. 1160)
Total A + B
C LABOUR
Fitter 1st class Each 1.00
Mason 1st class Each 1.00
Beldar Each 1.00
Total
Add GST on ITC % 18%
Total C
Total A + B + C
Add 1% for Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Total
Cost per WC
2.00 Providing and Fixing Concealed in wall Flushing Cistern with dual flush Actuator Plate (plastic body in ap
function, noise less float valve and fast filling action with all component parts of high quality including fixing
in all respects as per direction of the engineer-in-charge (Refer DSR-2016 Item No. 17.78 DAR 2016 Vol-I
Total A + B
C LABOUR
Fitter 1st class Each 1.00
Mason 1st class Each 1.00
Beldar Each 1.00
Total
Add GST on ITC % 18%
Total C
Total A + B + C
Add 1% for Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Total
Cost per cistern
3.00 Providing and Fixing star white vitreous china wash basin for under counter mounting, specially fabricate
and connection pipe to wall with C.P. wall flange and rubber adopter for waste connection complete, incl
good the walls wherever required (Refer Item No. 17.7A DAR 2016 Vol-II Page No. 1084)
Total A + B
C LABOUR
Fitter 1st class Each 0.33
Mason 1st class Each 0.33
Beldar Each 0.63
Pluming Rate Analysis
Total
Add GST on ITC % 18%
Total C
Total A + B + C
Add 1% for Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Total
Cost per Wash Basin
4.00 Providing and Fixing vitreous china urinal with C.I. hangers, 15mm dia inlet to built in spreaders with inbui
complete including cutting and making good the walls and floors wherever required (Ref. DAR 2016 VO
No: 1161)...
Total A + B
C LABOUR
Fitter 1st class Each 0.50
Beldar Each 0.50
Total
Add GST on ITC % 18%
Total C
Total A + B + C
Add 1% for Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Total
Cost per Urinal
Pluming Rate Analysis
5.00 Providing and Fixing electrical/battery operated concealed automatic flushing system for urinals, includ
125mm chrome sensor with CP brass body, ball valve etc,complete in all respect including cutting an
wherever required (Ref. DAR 2016 VOL - II Ref No:17.80 Page No: 1161)...
Total A + B + C
Add 1% for Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Total
Cost per Urinal flushing system
8 Providing and Fixing stainless steel sink double bowl single drain board Size 1740x515 mm with C.I. b
waste,C.P. brass chain and rubber plug, CP Brass Waste coupling and C.P. wall flange rubber adap
connection complete including cutting and making good the walls wherever required. (Ref. DAR 20
No:17.10.1.1 Page No: 1086).
9 Providing and Fixing 15 mm nominal bore CP Brass short body bib cock complete including cutting an
walls wherever required.
(Ref. DAR 2016 VOL - II Ref No:18.49 Page No: 1258).
10 Providing and Fixing 15 mm nominal bore CP Brass long body bib cock complete including cutting an
wherever required (Ref. DAR 2016 VOL - II Ref No:18.51 Page No: 1259).
11 Providing and Fixing CP Towel Rail fixed to PVC cleats with C.P. brass screws including cutting and
wherever required (Kohler "K-5630IN-CP" or Approved Equivalent)
(Ref. DAR 2016 VOL - II Ref No:17.73 Page No: 1112).
LABOUR
Carpenter 2nd class Day 0.17
Beldar Day 0.17
Total - B
Add GST on ITC % 18%
Total C
Total - A+B+C
Add 1% Water Charges % 1%
12 Providing and Fixing C.P. brass towel ring "Round" fixed to PVC cleats with C.P. brass screws inclu
making good the walls wherever required
(Ref. DAR 2016 VOL - II Ref No:17.72 Page No: 1112).
13 Providing and fixing SS liquid soap dispenser with push lever assembly with soap refill fixed in wall wi
all respect as per direction of the engineer-in-charge (Kohler K-10712D-CP or Approved equivalent)
(Ref. DAR 2016 VOL - II Ref No:18.65 Page No: 1272).
15 Providing and fixing C.P. brass angle valve quarter turn of approved quality conforming to IS:8931
15mm nominal bore (Ref. DAR 2016 VOL - II Ref No:18.53.1 Page No: 1259).
16 Providing and fixing Jumbo toilet paper holder including cutting and making good the walls wherever r
2016 VOL - II Ref No:17.34.1 Page No: 1259).
C LABOUR
Carpenter 2nd class Day 0.12
Beldar Day 0.12
17 Providing and fixing S.S. body tissue paper dispenser complete including cutting and making good th
required
(Ref. DAR 2016 VOL - II Ref No:17.34.1 Page No: 1259).
LABOUR
Carpenter 2nd class Day 0.12
Beldar Day 0.12
18 Providing and fixing Health faucet with 1 metre long Flexible Tube and CP wall hook with PVC & SS S
and making good the wall wherever required complete as directed by the Engineer-in-charge (Ref. DA
No:17.16A Page No: 1093)
19 Providing and fixing C.P Single lever concealed diverter for bath and shower with Button at Top c
Engineer-in-charge (Ref. DAR 2016 VOL - II Ref No:18.64 Page No: 1272)...
S.No./ Description
Code Unit Quantity
A MATERIALS
Price of CP Single lever concealed divertor Each 1
Pluming Rate Analysis
Less: Discount % 10%
Total - A
GST % 18%
Total
9999 Carraige of material and fixing charges LS 6.76
Total - B
Total - A+B
Add 1% Water Charges % 1%
LABOUR
Carpenter 2nd class Day 0.17
Beldar Day 0.17
24 Providing and Fixing CP Hinged Arms (Sliding rail) for Handicapped Toilet with SS Screws over Rawl
instructions of the engineer-in-charge (Ref. DAR 2016 VOL - II Ref No:17.73 Page No: 1155).... .
LABOUR
Carpenter 2nd class Day 0.17
Beldar Day 0.17
25 Providing and Fixing straight / offset type flexible single body push fit type WC pan connector with fac
with integral Single mould sealing fins made of flexible EVA body, including bush / adaptor for use with
(As observed at site)
LABOUR
Installation Each 1.00
Pluming Rate Analysis
Total - B
Add GST on ITC % 18%
Total - B+C
Total - A+B+C
Add 1% Water Charges % 1%
26 Providing and fixing C.P cast brass Double coat hook fixed to PVC cleats with C.P. brass screws com
instructions of the engineer-in-charge (Ref. DAR 2014 VOL - II Ref No:17.73.1 Page No: 1155)
LABOUR
Carpenter 2nd class Day 0.17
Beldar Day 0.17
Total - C
Add GST on ITC % 18%
Total C
Total - A+B+C
Add 1% Water Charges % 1%
29 Providing and fixing automatic sensor faucet for cold water, for wash basin complete in all respect
mounted auto tap, with infrared sensors with solenoid valves for cold water with electronic circuit an
accessories including cutting and making good the walls and floors as per requirement and as per app
make or equivalent (Kohler Cat No: K-18057IN-ND-CP or Approved equivalent) (Ref. DAR 2016 VOL
No: 1258).
II 1 Providing on Fixing 'C' Class heavy duty Mild Steel pipes conforming to IS-1239 including cutting, we
fitting viz. bends, tees, reducers, crosses, flanges etc. and fixing the pipes on wall / ceiling / beam / fl
clamps / structural supports/PCC block and painting two coats of red oxide primer and two coats of sy
approved shade complete as required and as specified. (For terrace rain water system)
(Ref. CPWD E&M 2016 DAR ITEM NO. 16.1.4).
S.No./ Description
Code Unit Quantity
Basic cost of M.S. Pipe 200 mm dia
Unit Qty
Detail cost of M.S. Pipe Meter 11.50
Less: Discount % 0%
Total
GST % 18%
Total A2
Total A1+A2
Labour:
i) Fitter Grade I Day 2.50
ii) Welder Day 1.00
iii) Helper Day 4.00
iv) Painter Day 0.50
Total - B
Add GST on ITC % 18%
Total B+C
Total - A+B+C
Add 1% Water Charges % 1%
Total A2
Total A1+A2
Labour:
i) Fitter Grade I Day 2.50
ii) Welder Day 1.00
iii) Helper Day 4.00
iv) Painter Day 0.50
Total - B
Add GST on ITC % 18%
Total B+C
Total - A+B+C
Add 1% Water Charges % 1%
Total A2
Total A1+A2
Labour:
i) Fitter Grade I Day 2.50
ii) Welder Day 1.00
iii) Helper Day 4.00
iv) Painter Day 0.50
Total - B
Add GST on ITC % 18%
Total B+C
Total - A+B+C
Add 1% Water Charges % 1%
II 15 Providing and Fixing G.I. Reducing elbow of 100 x 50 mm in cement concrete 1:2:4 at all levels for flo
cost of grating) for connection to floor traps in sunken portions, complete as per drawings and as per
engineer-in-charge.
INSTALLATION
Total B
Total A + B
GST % 18%
Total A + B+C
Add 1% Water Charges % 1%
Pluming Rate Analysis
II 19 Providing and fixing G.I. Inlet fittings with maximum 3 inlets 32,40 & 50 mm size fabricated from 100 m
welded G.I. sockets, fixed to C.I. Trap and set in cement concrete as per drawing (Based on actual ob
Total A1+A2
Rate of cartage of material % 1%
Total B
Total A+B
Labour:
Labour Fabrication Each 1.0
Installation charges Each 1.0
GST % 18%
Total C
Total A+B+C
Add 1% Water Charges % 1%
II 20 Providing and Fixing SS Grating with frame and SS Screws casted heavy 125 mm dia complete as d
charge. (Ref. DAR 2014 VOL - II Ref No:18.58.1 Page No: 1263)..
Labour:
Labour Fabrication Each 1.0
Installation charges Each 1.0
GST % 18%
Total B
Total A+ B
Add 1% Water Charges % 1%
II 21 Providing and Fixing Dome Grating for roof rain water pipe with all required accessories complete as
charge. (Ref. DAR 2014 VOL - II Ref No:18.58.1 Page No: 1263)..
S.No./ Description
Code Unit Quantity
Price of Dome Grating 300 mm dia Each 1
Less: Discount % 25%
Total - A
GST % 18%
Pluming Rate Analysis
II 22 Providing and fixing cast brass cleanout plug with suitable insert keys for opening, male threa
socket caulked to spun soil pipe including cost of joint etc.complete (Based on actual observation)
Total - A1+A2
Rate of cartage of material % 1%
Total - B
Total - A+B
C) Labour
Installation Each 1.00
GST % 18%
Total C
Total - A+B+C
Add 1% Water Charges % 1%
Total - A1+A2
Rate of cartage of material % 1%
Total - B
Total - A+B
C) Labour
Installation Each 1.00
GST % 18%
Total C
Total - A+B+C
Add 1% Water Charges % 1%
II 23 Providing joints with approved type sealent compound (Drip Seal joints) to sand cast iron/centifugally
fittings of Diameter
100 mm dia
S.No./ Description
Code Unit Quantity
Price of Drip seal 100 mm dia (7 Joints per one Metre
pipe)
Total Grams per Joint = 375 Each 1
Less: Discount % 0%
Total - A
GST % 18%
Total
Rate of cartage of material % 1%
Total - B
Total - A+B
C) Labour
Installation Each 1.00
GST % 18%
Total C
Total - A+B+C
Add 1% Water Charges % 1%
II 24 Providing and fixing cast iron soil, waste and vent pipes as per IS:15905 (Hubless pipes) including all
access of any degree i.e bends, junctions, branches, end caps, reducers, cowls, offsets, access piec
clamps, stays, etc and jointing with stainless steel 304 couplings with EPDM rubber gasket, including
and floors and making good the same wherever required, all structural supports as per approved spec
per instructions of the Engineer-in-charge. (Refer DAR Vol. II 2016 Ref No. 17.35.1.3 Page No. 297).
C) Labour:
i) Fitter Grade I Day 0.42
ii) Beldar Day 0.21
iii) Bandhani Day 0.83
Total - C
GST % 18%
Total - A+B
Add 1% Water Charges % 1%
II 25 Providing & laying cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 stone aggregate 20mm a
in bed and pipe.
For 150, 100mm, 75mm and 50mm dia pipes under floor including centering & shuttering wherever re
2 Providing and fixing G.I. Class "C" Pipe complete with G.I. Fittings and clamps, including cutting and m
(internal work)
Exposed on wall
a) 25 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (Page-934, item no-18.10.4)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
(A) 25 mm dia G.I. Pipe
A1 Metre 11.50
Added 15% for fittings and wastage on (A )
Less : Discount % 10%
Total A1
Add GST % 18%
Total
2271 1.15 * 31.70 = 36.455 kg = 0.036455 tonne
Carriage of G.I. pipes below 100 mm dia Tonne 0.036455
Total A2
Total A=A1+A2
White lead, hemp, oil etc. L.S. 9.49
Cement, sand and grit etc. L.S. 4.16
Total B
Total A+B
C) LABOUR
Fitter Day 0.33
Asstt. Fitter Day 0.98
Beldar Day 0.98
Total C
Add GST on ITC % 18%
Total
Total A + B + C
Add Water Charges % 1%
Total
Pluming Rate Analysis
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
b) 32 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (Page-934, item no-18.10.4)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
(A) 32 mm dia G.I. Pipe
A1 Metre 11.50
Added 15% for fittings and wastage on (A )
Less : Discount % 10%
Total A1
Add GST % 18%
Total
2271 1.15 * 31.70 = 36.455 kg = 0.036455 tonne
Carriage of G.I. pipes below 100 mm dia Tonne 0.036455
Total A2
Total A=A1+A2
White lead, hemp, oil etc. L.S. 9.49
Cement, sand and grit etc. L.S. 4.16
Total B
Total A+B
C) LABOUR
Fitter Day 0.33
Asstt. Fitter Day 0.98
Beldar Day 0.98
Total C
Add GST on ITC % 18%
Total
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
c) 40 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (Page-934, Item no-18.10.5)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
Pluming Rate Analysis
A MATERIALS
(A) 40 mm dia G.I. Pipe
A1 Metre 11.50
Added 15% for fittings and wastage on (A )
Less : Discount % 10%
Total A1
Add GST % 18%
Total
2271 1.15 * 36.50 = 41.975 kg = 0.041975 tonne
Carriage of G.I. pipes below 100 mm dia Tonne 0.041975
Total A2
Total A1+A2
White lead, hemp, oil etc. L.S. 13.52
Cement, sand and grit etc. L.S. 5.33
Total B
Total A+B
B) LABOUR
Fitter Day 0.33
Asstt. Fitter Day 1.31
Beldar Day 1.31
Total B
Add GST on ITC % 18%
Total
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
d) 50 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (Page-934, item no-18.10.6)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
(A) 50 mm dia G.I. Pipe
A1 Metre 11.50
Added 15% for fittings and wastage on (A )
Less : Discount % 10%
Total A1
Add GST % 18%
Total
2271 1.15 * 51.70 = 59.455 kg = 0.059455 tonne
Carriage of G.I. pipes below 100 mm dia Tonne 0.059455
Total A2
Total A1+A2
White lead, hemp, oil etc. L.S. 13.52
Pluming Rate Analysis
Cement, sand and grit etc. L.S. 5.33
Total B
Total A+B
C)LABOUR
Fitter Day 0.33
Asstt. Fitter Day 1.64
Beldar Day 1.64
Total C
Add GST on ITC % 18%
Total
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
e) 65 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (Page-934, item no-18.10.6)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
(A) 65 mm dia G.I. Pipe
A1 Metre 11.50
Added 15% for fittings and wastage on (A )
Less : Discount % 10%
Total A1
Add GST % 18%
Total
2271 1.02 * 66.30 = 67.626 kg = 0.067626 tonne
Carriage of G.I. pipes below 100 mm dia Tonne 0.067626
Total A2
Total A1+A2
White lead, hemp, oil etc. L.S. 13.52
Cement, sand and grit etc. L.S. 5.33
Total B
Total A+B
C)LABOUR
Fitter Day 0.33
Asstt. Fitter Day 1.64
Beldar Day 1.64
Total C
Add GST on ITC % 18%
Total
Total A + B + C
Add Water Charges % 1%
Total
Pluming Rate Analysis
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
f) 80 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (page-934, item no-18.10.6)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
(A) 80 mm dia G.I. Pipe
A1 Metre 11.50
Added 15% for fittings and wastage on (A )
Less : Discount % 10%
Total A1
Add GST % 18%
Total
C)LABOUR
Fitter Day 0.33
Asstt. Fitter Day 1.64
Beldar Day 1.64
Total C
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
3 Providing and fixing G.I pipes Class "C" complete with G.I fittings including trenching and refilling etc. (Exte
3a) 50 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (Page-1189, item no-18.12.6)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
MATERIALS
(A) 50 mm dia G.I. Pipe
A Metre 10.20
Added 2% for fittings and wastage on (A )
Less : Discount % 10%
Total A1
Add GST % 18%
Total
2271 1.02 * 51.70 = 52.73 kg = 0.05273 tonne
Carriage of G.I. pipes below 100 mm dia Tonne 0.052734
Total A2
Total A1+A2
Total A2
Total A1+A2
White lead, hemp, oil etc. L.S. 13.52
Total B
Total A+B
C)LABOUR
Fitter Grade 1 Day 0.25
Beldar Day 0.66
Trenching and Refiling
Beldar Day 0.66
Coolie Day 0.66
Total C
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
Pluming Rate Analysis
Total A2
Total A1+A2
White lead, hemp, oil etc. L.S. 13.52
Total B
Total A+B
C)LABOUR
Fitter Grade 1 Day 0.25
Beldar Day 0.66
Trenching and Refiling
Beldar Day 0.66
Coolie Day 0.66
Total C
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
Total A2
Total A1+A2
White lead, hemp, oil etc. L.S. 13.52
Total B
Total A+B
C)LABOUR
Fitter Grade 1 Day 0.25
Beldar Day 0.66
Trenching and Refiling
Beldar Day 0.66
Coolie Day 0.66
Total C
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold w
CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointi
one step CPVC solvent cement and the cost of cutting chases and making good the same including testing
direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
e) 40 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (Page-1177, Item no-18.8.4)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
Rate of Chlorinated Polyvinyl - chloride (CPVC) pipe 40
Metre 10.00
mm outer dia.
Less : Discount % 40%
Total A
Add GST % 18%
Total
Add 75% fittings, clamps and wastage
etc. on (X)
75 * X / 100
Pluming Rate Analysis
Making chases upto 7.5 x 7.5 cm. in walls and making
good the same
Rate as per item no. 18.78 Of SH: Water Supply Metre 10
Total B
Total A+B
C)Labour
Fitter Grade 1 Day 0.33
Assistant fitter 2nd class fitter Day 0.66
Beldar Day 0.66
Total C
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
f) 50 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.8.4)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
Rate of Chlorinated Polyvinyl - chloride (CPVC) pipe
Metre 10.00
50 mm outer dia.
Less : Discount % 40%
Total
Add GST % 18%
Total
Add 75% fittings, clamps and wastage
etc. on (X)
75 * X / 100
C)Labour
Fitter Grade 1 Day 0.33
Assistant fitter 2nd class fitter Day 0.66
Beldar Day 0.66
Pluming Rate Analysis
Total C
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
g) 65 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.8.4)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
MATERIALS
Rate of Chlorinated Polyvinyl - chloride (CPVC) pipe
Metre 10.00
65 mm outer dia.
Less : Discount % 40%
Total
Add GST % 18%
Total
Labour
Fitter Grade 1 Day 0.33
Assistant fitter 2nd class fitter Day 0.66
Beldar Day 0.66
Total B
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Pluming Rate Analysis
Add Labour Cess % 1%
Cost for 10 metre
Cost for 1 metre
Say Rs.
5 Providing and fixing Stainless Steel pipes (Grade SS-316) confirming to JIS 3448 standard complete with
SC-Contur in accordance with DVGW regulation W534 such as sockets, bends, elbows, tees, red
clamps/structural steel supports,hangers etc. necessary adapters for GI to SS / other metals and for co
jointing, sundries,cutting holes in walls/floors/slabs & making good, complete in all respects.
a) 22 mm OD
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.85.2)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
Rate of SS 316 pipe 22 mm outer dia. Metre 10.00
Less : Discount % 10%
Total
Add GST % 18%
Total
Add 3% of Fitting & Wastage
Add 2% of T & P and sundries etc.
Total A1
b) 35 mm OD
Pluming Rate Analysis
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.85.4)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
MATERIALS
Rate of SS 316 pipe 35 mm outer dia. Metre 10.00
Less : Discount % 10%
Total
Add GST % 18%
Total
Add 3% of Fitting & Wastage
Add 2% of T & P and sundries etc.
Total A1
c) 42 mm OD
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.85.5)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
MATERIALS
Rate of SS 316 pipe 42 mm outer dia. Metre 10.00
Less : Discount % 10%
Total
Add GST % 18%
Total
Add 3% of Fitting & Wastage
Pluming Rate Analysis
Add 2% of T & P and sundries etc.
Total A1
d) 54 mm OD
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.85.5)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
Rate of SS 316 pipe 54 mm outer dia. Metre 10.00
Less : Discount % 10%
Total
Add GST % 18%
Total
Add 3% of Fitting & Wastage
Add 2% of T & P and sundries etc.
Total A1
e) 75 mm OD
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.85.5)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
A MATERIALS
Rate of SS 316 pipe 75 mm outer dia. Metre 10.00
Less : Discount % 10%
Total
Add GST % 18%
Total
Add 3% of Fitting & Wastage
Add 2% of T & P and sundries etc.
Total A1
f) 90 mm OD
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.85.5)
Details of cost for 10 metre
S.No./ Description
Code Unit Quantity
MATERIALS
Rate of SS 316 pipe 90 mm outer dia. Metre 10.00
Less : Discount % 10%
Total
Add GST % 18%
Total
Add 3% of Fitting & Wastage
Add 2% of T & P and sundries etc.
Total A1
9 Providing and fixing G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws
work)
f) 100 mm nominal bore
Based on prorata basis and DAR 2016 Volume-II (page-1177, item no-18.46.8)
Details of cost for 1 Nos.
Pluming Rate Analysis
S.No./ Description
Code Unit Quantity
MATERIALS
G.I. Union 100 mm nominal bore Each 1
Less : Discount % 45%
Total
Add GST % 18%
Total A1
A2
Carraige of materials and sundries LS 1.82
Total A
B)LABOUR
Fitter Grade 1 Day 0.15
Beldar Day 0.15
Total B
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 1 Nos.
Say Rs.
LABOUR
Fitter Grade 1 Day 0.15
Beldar Day 0.15
Total B
Add GST on ITC % 18%
Total C
Total A + B + C
Add Water Charges % 1%
Pluming Rate Analysis
Total
Add CP&OH % 15%
Total
Add Labour Cess % 1%
Cost for 1 Nos.
Say Rs.
22 Providing and fixing forged brass lever operated ball valve of full flow with forged brass ball (Machined to
hard chrome plated) and spindle with setting and gland of superior quality having minimum working pre
complete in all respect.
30 Providing and Fixing Pressure Reducing station for cold water supply comprising of 2 Nos. of brass ba
bye-pass and ball valve with inbuilt strainers and a PRV (Diaphram type) unit with out going pressure
union connection including safety valve. The complete system is tested to a pressure not less than 15
to reduce the pressure from 3.5 Kg/Cm2 to 1.0 Kg/Cm2(or as desired at site) including flanges/union
washers complete as required for applications. (Horizontal or vertical as applicable). (As observed a
12.26 Providing and Laying uPVC water pipes (I.S:4985) of 10 Kg/cm2 including all fittings e.g. bends, junc
tee, offsets, access pieces etc. jointing with solvent cement complete. Rates includes any type of fittin
provision of Garden Hydrant point in main ring of the Hydrant pipe in different location complete in wit
testing of joints complete as per direction of the engineer in charge (Refer CPWD AOR 2016 VOL -I
34 Providing and fixing thermal insulation over hot water pipes in chase having Red Oxide Primer Coa
'Kaiflex' /Careflex or approved equivalent thermal insulation tubing, a elastomeric flexible material hav
closed cell structure of expanded synthetic rubber having density of 60-90 Kg/m3 over pipes of follow
required accessories complete as per Manufactuer's specifications and finishing it as per site requirem
Plaster of 1:3 (1 Cement: 3 Coarse sand).(As observed at site)
35 Providing and fixing 750 mm long hot dipped G.I. Puddle flanges for water tanks as per I.S. 1239 (Cla
M.S. Plate of suitable size and welded alround the pipe fixed in walls, beams and top slab of R.C.C ta
details in all respects and as per drawing (As observed at site).
37 Providing & fixing butterfly valve (with motorized actuator) of rating PN 1.6, wafer type, in cast iron body wit
EPDM seal, SS single piece shaft, conforming to IS-13095 of the following sizes complete with cast iron ha
flanges, bolts, nuts, washers & inserted rubber gaskets, as required and as per enclosed specification, wit
Actuator, of 15Nm- 400Nm Torque, made of aluminium alloy (resistant to heat, acid , alkali, corrosion), and
duty motor, with stabilized start speed to effectively avoid water hammering, with waterproofing seal (IP 67)
low noise level, built –in thermal protection complete as per approved type and specifications as per instruc
- charge.
39.00 Providing, fixing and testing, double flanged Water Flow Meter complete with digital display provision & i
and Remote Totalizer complete in all respect as per manufacturers specification, instructions and a
incharge. (Refer Item No. 18.60 DAR 2016 Vol-II Page No. 1266)
IV 4.0 Providing and laying non-pressure NP3 class socketed R.C.C. pipes (medium duty) jointed with EPD
including testing of joints and checking and making good leakages wherever required complete as pe
engineer-in-charge (Ref. DAR 2016 VOL - II Ref No:19.6 Page No: 1218)..
IV 6.0 Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40
round S.W/RCC/HDPE. pipes including bed concrete as per standard design:
Cu.M. 1.90
Detail cost for 10 Metre
Pluming Rate Analysis
Detail cost for 1 Metre
Cu.M. 2.20
Detail cost for 10 Metre
Detail cost for 1 Metre
Cu.M. 2.50
Detail cost for 10 Metre
Detail cost for 1 Metre
Cu.M. 3.00
Detail cost for 10 Metre
Detail cost for 1 Metre
Cu.M. 3.33
Detail cost for 10 Metre
Detail cost for 1 Metre
Cu.M. 3.50
Detail cost for 10 Metre
Detail cost for 1 Metre
Cu.M. 3.90
Detail cost for 10 Metre
Detail cost for 1 Metre
Cu.M. 4.30
Detail cost for 10 Metre
Detail cost for 1 Metre
IV 7.0 Providing and laying of High density Polythene (HDPE Pipes) material grade PE - 80, working pressu
maximum permissible working pressure) confirming IS - 14333 jointed by Butt welding method includi
complete (Ref. DAR 2016 VOL - II Ref No:19.6 Page No: 1218)..
24.00 Construction of Grease trap of size 2 m x1 m (Internal) with effective depth of 1 m with Brick Masonr
Cement: 4 Coarse sand) over a bed of 150 mm thick PCC 1:5:10 (1 Cement: 5 Coarse sand: 10 grad
mm nominal size) including a baffle wall of Brick work, covered with RCC slab of 150 mm thickness, o
2 Coarse sand: 4 graded stone aggregate of 20 mm nominal size) including centering, shuttering and
with providing and fixing Foot rests @300 mm C to C with Two 600x600 mm D.I. Manhole Covers with
including 150 mm dia Inlet & Outlet pipes complete .
Each 16
17.58.2 Lead caulked joint 75 mm dia Each 6
Supply and Fixing of 600x600 mm dia M.H. Cover
D.I. Heavy duty (C-250, HD) Each 2
Carraige of material % 1%
Total A2
Total A1+A2
B) Labour (5%)
Total B
GST ON ITC % 18%
Total B+C
Total A+B+C
Add 1% Water Charges % 1%
26 Providing and Fixiing extra medium duty, water tight double sealed Ductile iron 560 mm dia. Circular M
frames specially casted for placing over the OH Water tanks with lifting and locking arrangements as p
complete in all respect including fixing in PCC as per site Requirement .
C)Labour:
Installation % 5%
Total C
GST ON ITC % 18%
Total B+C
Total A+B+C
Add 1% Water Charges % 1%
27 Providing and fixing M.S. grating and preferably in 600mm long pieces, fabricated with 16x16mm s
clear spacing and welded to angle iron 25x25x5mm and placed firmly on angle iron frame of 30x30x5
fasts approximately 75mm long welded at intervals of 500mm including two or more coats of synthet
approved quality and shade over one coats of primer and set in cement mortar 1:3 (1 cement : 3 coa
as per attached details for drain.
B)Labour:
Fitter 2nd class Day 0.10
Beldar Day 0.10
GST % 18%
Total C
Total A+B+C
Add 1% Water Charges % 1%
Pluming Rate Analysis
VI 18 Construction of brick masonry desilting chamber of size 200x100x60cm (effective depth) before rain
designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) , foundation concrete 1:4:8 mix (1
sand; 8 graded stone aggregate 40mm nominal size), inside and outside plastering 12mm thick with c
cement : 3 coarse sand), finished with a floating coat of neat cement inside and rough plaster on ou
grating , neatly finished complete in all respects including neccessary excavation, refilling and dispos
complete as per attached Sketch.
Total
Say Rs.
Pluming Rate Analysis
size 75x50 cm deep and 1.8 cm thick, fixed in
edding the stone in the chase with epoxy grout or
6 mm nominal size) as per direction of Engineer-
Rate Amount
Hindware Enigma slim
8910.00 8910.00
8910.00
4009.50
4900.50
882.09
5782.59
1.73 16.94
16.94
5799.53
710.00 710.00
710.00 710.00
536.00 536.00
1956.00
352.08
2308.08
8107.61
81.08
8188.68
1228.30
9416.99
94.17
9511.16
Say Rs. 9511.00
Rate Amount
Jaquar JCS-WHT-2400S
5180.00 5180.00
5180.00
518.00
4662.00
Pluming Rate Analysis
839.16
5501.16
1.73 16.94
16.94
5518.10
710.00 710.00
710.00 710.00
536.00 536.00
1956.00
352.08
2308.08
7826.18
78.26
7904.44
1185.67
9090.10
90.90
9181.01
Say Rs. 9181.00
unting, specially fabricated brackets painted white
onnection complete, including cutting and making
No. 1084)
Rate Amount
Jaquar
1790.00 1790.00
1790.00
179.00
1611.00
289.98
1900.98
80.00 80.00
65.00 65.00
1.73 27.89
1.73 23.16
1.73 46.55
1.73 23.39
266.00
2166.98
710.00 234.30
710.00 234.30
536.00 337.68
Pluming Rate Analysis
806.28
145.13
951.41
3118.39
31.18
3149.57
472.44
3622.01
36.22
3658.23
Say Rs. 3658.00
Rate Amount
Jaquar
6250.00 6250.00
6250.00
625.00
5625.00
1012.50
6637.50
1.73 16.94
16.94
6654.44
710.00 355.00
536.00 268.00
623.00
112.14
735.14
7389.58
73.90
7463.47
1119.52
8582.99
85.83
8668.82
Say Rs. 8669.00
Pluming Rate Analysis
stem for urinals, including front S.S plate 125 x
ect including cutting and making good the walls
Rate Amount
Jaquar
6960.00 6960.00
6960.00
696.00
6264.00
1127.52
7391.52
1.73 16.94
16.94
7408.46
710.00 355.00
536.00 268.00
623.00
112.14
735.14
8143.60
81.44
8225.03
1233.75
9458.79
94.59
9553.38
Say Rs. 9553.38
Rate Amount
NeelKanth
11180.00 11180.00
5590.00
5590.00
1006.20
6596.20
65.00 130.00
1.73 46.78
1.73 46.55
Pluming Rate Analysis
223.33
6819.53
710.00 156.20
710.00 426.00
536.00 439.52
1021.72
183.91
1205.63
8025.16
80.25
8105.41
1215.81
9321.23
93.21
9414.44
9414.44
SAY Rs. 9414.44
Rate Amount
Hindware
690.00 690.00
276.00
414.00
74.52
488.52
1.73 20.02
20.02
508.54
5.09
513.62
77.04
590.66
5.91
596.57
596.57
SAY Rs. 596.57
Rate Amount
Pluming Rate Analysis
960.00 960.00
96.00
864.00
155.52
1019.52
1.73 24.06
24.06
1043.58
10.44
1054.02
158.10
1212.12
12.12
1224.24
1224.24
SAY Rs. 1224.24
Rate Amount
1045.00 1045.00
418.00
627.00
112.86
739.86
21.85 43.70
190.00 11.40
1.73 7.20
62.30
802.16
653.00 111.01
536.00 91.12
202.13
36.38
238.51
1040.67
10.41
1051.08
157.66
1208.74
Pluming Rate Analysis
12.09
1220.83
1220.83
SAY Rs. 1220.83
Rate Amount
Jaquar
740.00 740.00
74.00
666.00
119.88
785.88
1.73 35.08
35.08
820.96
8.21
829.17
124.38
953.55
9.54
963.09
SAY Rs. 963.09
Rate Amount
Jaquar
2300.00 2300.00
230.00
2070.00
372.60
2442.60
1.73 11.69
11.69
2454.29
24.54
2478.84
371.83
2850.66
28.51
2879.17
Pluming Rate Analysis
ake and as per the direction of Engineerin-
Rate Amount
Hindware
1150.00 1150.00
460.00
690.00
124.20
814.20
1.73 34.60
34.60
848.80
8.49
857.29
128.59
985.88
9.86
995.74
SAY Rs. 995.74
onforming to IS:8931
).
Rate Amount
Jaquar
890.00 890.00
89.00
801.00
144.18
945.18
1.73 19.57
19.57
964.75
9.65
974.39
146.16
1120.55
11.21
1131.76
SAY Rs. 1131.76
ood the walls wherever required (Ref. DAR
Rate Amount
Dolphy
Pluming Rate Analysis
469.00 469.00
0.00
469.00
84.42
553.42
1.73 7.42
7.42
560.84
21.85 43.70
190.00 0.04
1.73 7.42
51.16
612.00
653.00 78.36
536.00 64.32
142.68
25.68
168.36
780.36
7.80
788.17
118.23
906.39
9.06
915.46
SAY Rs. 915.46
ng and making good the walls wherever
Rate Amount
Kohler 5633IN-CP
1320.00 1320.00
382.80
937.20
168.70
1105.90
1.73 7.42
7.42
1113.32
21.85 43.70
Pluming Rate Analysis
190.00 0.04
43.74
1157.06
653.00 78.36
536.00 64.32
142.68
25.68
168.36
1325.42
13.25
1338.67
200.80
1539.47
15.39
1554.87
SAY Rs. 1554.87
ll hook with PVC & SS Screws including cutting
neer-in-charge (Ref. DAR 2016 VOL - II Ref
Rate Amount
Hindware F160068
970.00 970.00
388.00
582.00
104.76
686.76
1.73 19.38
19.38
706.14
7.06
713.20
106.98
820.18
8.20
828.38
SAY Rs. 828.38
er with Button at Top complete as directed by
Rate Amount
3170.00 3170.00
Pluming Rate Analysis
317.00
2853.00
513.54
3366.54
1.73 11.69
11.69
3378.23
33.78
3412.02
511.80
3923.82
39.24
3963.06
Say Rs. 3963.06
Hindware F160039
Rate Amount
790.00 790.00
316.00
474.00
85.32
559.32
1.73 11.69
11.69
571.01
5.71
576.72
86.51
663.23
6.63
669.87
Say Rs. 669.87
Engineer-in-charge (Ref. DAR 2016 VOL - II
Rate Amount
Jaquar SPJ-CHR-429
910.00 910.00
91.00
819.00
147.42
966.42
1.73 11.69
11.69
Pluming Rate Analysis
978.11
9.78
987.90
148.18
1136.08
11.36
1147.44
Say Rs. 1147.44
ugs complete for Handicapped Toilet as directed
)....
Rate Amount
Jaquar AHS-CHR-1507
1240.00 1240.00
124.00
1116.00
200.88
1316.88
1.73 7.20
7.20
1324.08
21.85 43.70
190.00 11.40
55.10
1379.18
653.00 111.01
536.00 91.12
202.13
36.38
238.51
1617.69
16.18
1633.87
245.08
1878.95
18.79
1897.74
SAY Rs. 1897.74
SS Screws over Rawl Plugs complete as per
Page No: 1155).... .
Rate Amount
Pluming Rate Analysis
6565.00 6565.00
1313.00
5252.00
945.36
6197.36
1.73 7.20
7.20
6204.56
21.85 43.70
190.00 11.40
55.10
6259.66
653.00 111.01
536.00 91.12
202.13
36.38
238.51
6498.17
64.98
6563.15
984.47
7547.62
75.48
7623.10
SAY Rs. 7623.10
pan connector with factory supplied seal guard
sh / adaptor for use with C.I. Pipe as supplied
Geberit
Rate Amount
1080.00 1080.00
0.00
1080.00
194.40
1274.40
12.74
12.74
1287.14
50.00 50.00
Pluming Rate Analysis
50.00
9.00
59.00
1346.14
13.46
1359.61
203.94
1563.55
15.64
1579.18
SAY Rs. 1579.18
h C.P. brass screws complete as per
1 Page No: 1155)
Rate Amount
390.00 390.00
156.00
234.00
42.12
276.12
1.73 7.20
7.20
283.32
21.85 43.70
190.00 11.40
55.10
338.42
653.00 111.01
536.00 91.12
202.13
36.38
238.51
576.93
5.77
582.70
87.40
670.10
6.70
676.81
SAY Rs. 676.81
Pluming Rate Analysis
making good the walls wherever required
No: K-37315IN-4-CP or Approved equivalent).
Jaquar SOL-CHR-6309
Rate Amount
3050.00 3050.00
305.00
2745.00
494.10
3239.10
1.73 20.02
20.02
3259.12
32.59
3291.71
493.76
3785.46
37.85
3823.32
SAY Rs. 3823.32
mplete in all respect including basin
with electronic circuit and necessary
uirement and as per approved manufacturer’s
t) (Ref. DAR 2016 VOL - II Ref No:18.49 Page
Jaquar SNR-CHR-51021
Rate Amount
7670.00 7670.00
1534.00
6136.00
1104.48
7240.48
1.73 20.02
20.02
7260.50
72.60
7333.10
1099.97
8433.07
84.33
8517.40
SAY Rs. 8517.40
Pluming Rate Analysis
eats / Rawl Plug with C.P brass screws,
observed at site)
EURONICS EA03
Rate Amount
1400.00 1400.00
0.00
1400.00
252.00
1652.00
16.52
16.52
1668.52
500.00 500.00
500.00
90.00
590.00
2258.52
22.59
2281.11
342.17
2623.27
26.23
2649.50
SAY Rs. 2649.50
39 including cutting, welding, nut-bolts, gasket,
wall / ceiling / beam / floor with suitable MS
mer and two coats of synthetic enamel paint of
er system)
Rate Amount
Oriplast
1021.28 11744.72
0.00
11744.72
2114.05
13858.77
101.40 477.59
14336.36
143.36
2150.45
Pluming Rate Analysis
2293.82
16630.18
710.00 1420.00
710.00 532.50
536.00 1742.00
653.00 326.50
4021.00
723.78
4744.78
21374.96
213.75
21588.71
3238.31
24827.02
248.27
25075.29
2507.53
SAY Rs. 2507.53
Rate Amount
Oriplast
Rate Amount
1600.00 18400.00
0.00
18400.00
3312.00
21712.00
101.40 636.79
22348.79
223.49
3352.32
3575.81
25924.60
710.00 1775.00
710.00 710.00
536.00 2144.00
653.00 326.50
4955.50
891.99
5847.49
31772.09
317.72
32089.81
4813.47
36903.28
Pluming Rate Analysis
369.03
37272.31
3727.23
SAY Rs. 3727.23
Rate Amount
Oriplast
Rate Amount
2000.00 23000.00
0.00
23000.00
4140.00
27140.00
101.40 795.99
27935.99
279.36
4190.40
4469.76
32405.75
710.00 1775.00
710.00 710.00
536.00 2144.00
653.00 326.50
4955.50
891.99
5847.49
38253.24
382.53
38635.77
5795.37
44431.14
444.31
44875.45
4487.54
SAY Rs. 4487.54
Rate Amount
TATA
Rate Amount
2411.42 27731.33
0.00
27731.33
4991.64
32722.97
Pluming Rate Analysis
101.40 955.19
33678.16
336.78
5051.72
5388.51
39066.66
710.00 1775.00
710.00 710.00
536.00 2144.00
653.00 326.50
4955.50
891.99
5847.49
44914.15
449.14
45363.29
6804.49
52167.79
521.68
52689.47
5268.95
SAY Rs. 5268.95
KS Brand
Rate Amount
1160.00 1160.00
0.00
1160.00
208.80
1368.80
100.00 100.00
100.00
1468.80
100.00
100.00
1568.80
282.38
1851.18
18.51
Pluming Rate Analysis
1869.70
280.45
2150.15
21.50
2171.65
SAY Rs. 2171.65
ze fabricated from 100 mm dia G.I.pipes and
ing (Based on actual observation).
Rate Amount
748.99 299.60
0.00
299.60
53.93
353.52
660.00 1320.00
501.60
818.40
147.31
965.71
1319.24
13.19
13.19
1332.43
500.00 500.00
100.00 100.00
600.00
108.00
708.00
2040.43
20.40
2060.83
309.12
2369.96
23.70
2393.66
SAY Rs. 2393.66
Rate Amount
600.00 600.00
Pluming Rate Analysis
150.00
450.00
81.00
531.00
5.31
5.31
536.31
500.00 500.00
100.00 100.00
600.00
108.00
708.00
1244.31
12.44
1256.75
188.51
1445.27
14.45
1459.72
SAY Rs. 1459.72
Rate Amount
19500.00 19500.00
4875.00
14625.00
2632.50
17257.50
1.73 7.20
7.20
17264.70
172.65
17437.34
2615.60
20052.95
200.53
20253.47
SAY Rs. 20253.47
Rate Amount
25000.00 25000.00
6250.00
18750.00
3375.00
Pluming Rate Analysis
22125.00
1.73 7.20
7.20
22132.20
221.32
22353.52
3353.03
25706.55
257.07
25963.61
SAY Rs. 25963.61
Rate Amount
590.00 590.00
147.50
442.50
79.65
522.15
660.00 660.00
250.80
409.20
73.66
482.86
1005.01
10.05
10.05
1015.06
50.00 50.00
9.00
59.00
1074.06
10.74
1084.80
162.72
1247.52
12.48
1259.99
SAY Rs. 1259.99
Rate Amount
945.00 945.00
236.25
708.75
Pluming Rate Analysis
127.58
836.33
1350.00 1350.00
513.00
837.00
150.66
987.66
1823.99
18.24
18.24
1842.22
50.00 50.00
9.00
59.00
1901.22
19.01
1920.24
288.04
2208.27
22.08
2230.36
SAY Rs. 2230.36
nd cast iron/centifugally cast spun iron pipes &
Rate Amount
590.63 590.63
0.00
590.63
106.31
696.94
6.97
6.97
703.91
50.00 50.00
9.00
59.00
762.91
7.63
770.54
115.58
886.12
8.86
894.98
SAY Rs. 894.98
Pluming Rate Analysis
Rate Amount
1480.00 27439.20
8231.76
35670.96
11414.71
24256.25
4366.13
28622.38
1.73 93.11
93.11
28715.49
1.73 139.66
139.66
28855.15
710.00 298.20
536.00 112.56
593.00 492.19
902.95
162.53
1065.48
29920.63
299.21
30219.84
4532.98
34752.81
347.53
35100.34
1950.02
SAY Rs. 1950.02
one aggregate 20mm and down gauge) 75mm
Rate Amount
5481.95 219.28
193.95 157.10
376.38
SAY Rs. 376.38
Rate Amount
Jindal
159.84 1838.16
183.82
1654.34
297.78
1952.13
92.24 3.36
3.36
1955.49
1.73 16.42
1.73 7.20
23.61
1979.10
710.00 234.30
653.00 639.94
536.00 525.28
1399.52
251.91
1651.43
3630.54
36.31
3666.84
Pluming Rate Analysis
550.03
4216.87
42.17
4259.04
425.90
425.90
Rate Amount
Jindal
207.80 2389.70
238.97
2150.73
387.13
2537.86
92.24 3.36
3.36
2541.22
1.73 16.42
1.73 7.20
23.61
2564.84
710.00 234.30
653.00 639.94
536.00 525.28
1399.52
251.91
1651.43
4216.27
42.16
4258.43
638.77
4897.20
48.97
4946.17
494.62
494.62
Rate Amount
Pluming Rate Analysis
Jindal
245.48 2823.02
282.30
2540.72
457.33
2998.05
92.24 3.87
3.87
3001.92
1.73 23.39
1.73 9.22
32.61
3034.53
710.00 234.30
653.00 855.43
536.00 702.16
1791.89
322.54
2114.43
5148.96
51.49
5200.45
780.07
5980.52
59.81
6040.32
604.03
604.03
Rate Amount
Jindal
329.97 3794.66
379.47
3415.19
614.73
4029.92
92.24 5.48
5.48
4035.41
1.73 23.39
Pluming Rate Analysis
1.73 9.22
32.61
4068.02
710.00 234.30
653.00 1070.92
536.00 879.04
2184.26
393.17
2577.43
6645.45
66.45
6711.90
1006.78
7718.68
77.19
7795.87
779.59
780.00
Rate Amount
Jindal
424.73 4884.40
488.44
4395.96
791.27
5187.23
92.24 6.24
6.24
5193.47
1.73 23.39
1.73 9.22
32.61
5226.08
710.00 234.30
653.00 1070.92
536.00 879.04
2184.26
393.17
2577.43
7803.50
78.04
7881.54
Pluming Rate Analysis
1182.23
9063.77
90.64
9154.41
915.44
915.44
Rate Amount
Jindal
522.92 6013.58
601.36
5412.22
974.20
6386.42
92.24 8.13
8.13
6394.55
1.73 23.39
1.73 9.22
32.61
6427.16
710.00 234.30
653.00 1070.92
536.00 879.04
2184.26
393.17
2577.43
9004.59
90.05
9094.63
1364.20
10458.83
104.59
10563.42
1056.34
1056.34
Rate Amount
Pluming Rate Analysis
Jindal
748.99 8613.39
861.34
7752.05
1395.37
9147.41
92.24 15.38
15.38
9162.80
1.73 23.39
1.73 9.22
32.61
9195.41
710.00 234.30
653.00 1070.92
536.00 879.04
2184.26
393.17
2577.43
11772.83
117.73
11890.56
1783.58
13674.15
136.74
13810.89
1381.09
1381.09
Rate Amount
Jindal
1115.73 12830.90
1283.09
11547.81
2078.60
13626.41
92.24 22.59
22.59
13649.00
Pluming Rate Analysis
1.73 23.39
1.73 9.22
32.61
13681.62
710.00 234.30
653.00 1070.92
536.00 879.04
2184.26
393.17
2577.43
16259.04
162.59
16421.63
2463.24
18884.88
188.85
19073.73
1907.37
1907.37
Rate Amount
Jindal
329.97 3365.69
336.57
3029.12
545.24
3574.37
92.24 4.86
4.86
3579.23
1.73 16.42
16.42
3595.65
710.00 113.60
536.00 176.88
536.00 353.76
536.00 353.76
998.00
Pluming Rate Analysis
179.64
1177.64
4773.29
47.73
4821.02
723.15
5544.18
55.44
5599.62
559.96
559.96
Rate Amount
Jindal
424.73 4332.25
433.22
3899.02
701.82
4600.85
92.24 6.24
6.24
4607.08
1.73 23.39
23.39
4630.47
710.00 177.50
536.00 353.76
536.00 353.76
536.00 353.76
1238.78
222.98
1461.76
6092.23
60.92
6153.16
922.97
7076.13
70.76
7146.89
714.69
714.69
Pluming Rate Analysis
Rate Amount
Jindal
522.92 5333.78
533.38
4800.41
864.07
5664.48
92.24 8.13
8.13
5672.61
1.73 23.39
23.39
5696.00
710.00 177.50
536.00 353.76
536.00 353.76
536.00 353.76
1238.78
222.98
1461.76
7157.76
71.58
7229.34
1084.40
8313.74
83.14
8396.87
839.69
839.69
Rate Amount
Jindal
748.99 7639.70
763.97
6875.73
Pluming Rate Analysis
1237.63
8113.36
92.24 8.13
8.13
8121.49
1.73 23.39
23.39
8144.88
710.00 177.50
536.00 353.76
536.00 353.76
536.00 353.76
1238.78
222.98
1461.76
9606.64
96.07
9702.70
1455.41
11158.11
111.58
11269.69
1126.97
1126.97
Oriplast
Rate Amount
295.90 2959.00
1183.60
1775.40
319.57
2094.97
1571.229
Pluming Rate Analysis
93.85 938.50
2509.73
4604.70
710.00 234.30
653.00 430.98
536.00 353.76
1019.04
183.43
1202.47
5807.17
58.07
5865.24
879.79
6745.03
67.45
6812.48
681.25
681.25
Rate Amount
Astral
503.40 5034.00
2013.60
3020.40
543.67
3564.07
2673.054
93.85 938.50
3611.55
7175.63
710.00 234.30
653.00 430.98
536.00 353.76
Pluming Rate Analysis
1019.04
183.43
1202.47
8378.09
83.78
8461.87
1269.28
9731.16
97.31
9828.47
982.85
982.85
Rate Amount
798.75 7987.50
3195.00
4792.50
862.65
5655.15
4241.36
93.85 938.50
5179.86
10835.01
710.00 234.30
653.00 430.98
536.00 353.76
1019.04
183.43
1202.47
12037.48
120.37
12157.85
1823.68