Professional Documents
Culture Documents
8 Metallic and other inorganic coatings - Vickers and Knoop DIN EN ISO BS EN ISO NF EN ISO
ISO 4516 2002 2002 2002 2002 GB/T 9790 1988
microhardness tests 4516 4516 4516
9 DIN EN ISO BS EN ISO NF EN ISO
Metallic materials - Conversion of hardness values ISO 18265 2013 2014 2013 2013 GB/T33362 2016
18265 18265 18265
10 DIN EN ISO
2016 BS EN ISO NF EN ISO
Leeb hardness test - Test method ISO 16859-1 2015 16859-1 2015 2015 GB/T 17394.1 2014 JJG 747 1999
16859-1 16859-1
DIN 50156-1 2007
DIN EN ISO
2016 BS EN ISO NF EN ISO
Leeb hardness test - Verification ISO 16859-2 2015 16859-2 2015 2015 A956 2017 GB/T 17394.2 2012 JJG 747 1999
16859-2 16859-2
DIN 50156-2 2007
DIN EN ISO
2016 BS EN ISO NF EN ISO
Leeb hardness test - calibration of reference blocks ISO 16859-3 2015 16859-3 2015 2015 GB/T 17394.2 2012
16859-3 16859-3
DIN 50156-3 2007
11 Hardness testing with portable measuring instruments operating with DIN 50157-1 2008
mechanical penetration depth- Test method
12 Hardness testing with portable measuring instruments operating with DIN 50158-1 2008
electrical penetration depth- Test method
13 Hardness testing with the UCI method Part 1: test method DIN 50159-1 2015 GB/T34205 2017
27
Iron and steel - Determination of the conventional depth of hardening DIN EN ISO BS EN ISO NF EN
2016 2005 2005
after surface heating; German version EN 10328:2005 10328 10328 10328
28
Hardness depth of heat-treated parts; determination of the effective
DIN 50190-3 1979
depth of hardening after nitriding
29
Hardness depth of heat-treated parts - Part 4: Determination of the
DIN 50190-4 1999
fusion hardening depth and the fusion depth
30 DIN EN ISO BS EN ISO NF EN ISO
Method of hardenability test for steel (End quenching method) (Jominy) JIS G 0561 2011 ISO 642 1999 2000 1999 1999 GB/T 225 2006
642 642 642
31
Method of measuring nitrided case depth for iron and steel JIS G 0562 1993 GB/T 11354 2005
32
Method of measuring surface hardness for nitrided iron and steel JIS G 0563 1993
33
Rubber - Procedures for preparing and conditioning test pieces for DIN ISO BS ISO NF ISO ABNT NBR ISO
JIS K 6250 2006 ISO 23529 2016 2012 2016 2017 2014 GB/T 2941 2006
physical test methods 23529 23529 23529 23529
34
Sintered metal materials, excluding hardmetals -- Determination of DIN EN ISO BS EN ISO NF EN ISO GOST 25698-98
ISO 4498 2010 2010 2010 2010 GB/T 9097 2016 IS 15703 2011 1998
apparent hardness and microhardness 4498 4498 4498 (ISO 4498-1-90)
35
Sintered metal materials, excluding hardmetals - Determination of
apparent hardness - Part 1: Materials of essentially uniform section GB/T 9097 2016
hardness
36
Sintered metal materials, excluding hardmetals -- Determination of
apparent hardness -- Part 2: Case-hardened ferrous materials, surface GB/T 3850 2015
enriched by carbon or carbon and nitrogen
BS ISO NF ISO
Rubber, vulcanized or thermoplastic-Determination of hardness- JIS K 6253-5 2012 ISO 48-9 2018 DIN 53505 1987 2010 2018 ASTM D2240 2015
48-9 48-9
Part 5: Calibration and verification of hardness testers DIN EN ISO BS EN ISO NF EN ISO JJG304(A) 2003
ISO 21509 2006 2015 2006 2015
21509 21509 21509 JJG1039(D) 2008
38
Destructive tests on welds in metallic materials -- Hardness testing -- DIN EN ISO BS EN ISO NF EN ISO
ISO 9015-1 2001 2011 2011 2011
Part 1: Hardness test on arc welded joints 9015-1 9015-1 9015-1
39
Destructive tests on welds in metallic materials -- Hardness testing -- Part 2: DIN EN ISO BS EN ISO NF EN ISO
ISO 9015-2 2016 2016 2016 2016
Microhardness testing of welded joints 9015-2 9015-2 9015-2
40 Metallic materials -- Instrumented indentation test for hardness and DIN EN ISO BS EN ISO NF EN ISO
ISO 14577-1 2015 2015 2015 2015
materials parameters -- Part 1: Test method 14577-1 14577-1 14577-1
Metallic materials -- Instrumented indentation test for hardness and DIN EN ISO BS EN ISO NF EN ISO
ISO 14577-2 2015 2015 2015 2015
materials parameters -- Part 2: Verification and calibration of testing 14577-2 14577-2 14577-2
Metallic materials -- Instrumented indentation test for hardness and DIN EN ISO BS EN ISO NF EN ISO
ISO 14577-3 2015 2015 2015 2015
materials parameters -- Part 3: Calibration of reference blocks 14577-3 14577-3 14577-3
Metallic materials -
ISO 14577-5 -
Instrumented indentation test for hardness and materials parameters -
(Draft)
Part 5: Linear elastic dynamic instrumented indentation testing (DIIT)
41
Testing method for barcol hardness of glass fiber reinforced plastics JIS K 7060 1995 DIN EN 59 2016 BS EN 59 2016
42 Testing methods for fracture toughness of fine ceramics at room JIS R 1607 2015
43 Plastics erasers JIS S 6050 2008
44 Methods of test for woods JIS Z 2101 2009 GB/T 1941 2009
45
Testing method of maximum hardness in weld heat-affected zone JIS Z 3101 1990
46 Method of hardness test for deposited metal JIS Z 3114 1990
47 Method of taper hardness test in weld heat-affected zone JIS Z 3115 1973
48 Methods for the calibration of vibration and shock pick-ups(transducers)
49 Methods for the calibration of vibration and shock pick-ups - Basic GOST R ISO
JIS B 0908 1991 ISO 16063-1 1998 ISO 16063-1 2016 GB/T 20485.1 2008 2009
concepts 16063-1-2009
50 Primary vibration calibration by laser interferometry GOST R ISO
ISO 16063-11 1999 hiids GB/T 20485.11 2006 2009
16063-11-2009
51 DINI ISO GOST R ISO
Comparison(secondary vibration)calibration by sinusoidal ISO 16063-21 2003 2016 GB/T 20485.21 2007 2009
16063-21 16063-21-2009
52 DINI ISO GOST R ISO
Shock calibration by comparison to a reference transducer ISO 16063-22 2005 2015 GB/T 20485.22 2008 2012
16063-22 16063-22-2012
53 Calibration by Earth's gravitation ISO 5347-5 GB/T 20485.16 2018
Primary calibration by centrifuge ISO 5347-7 GB/T 13823.14 1995
Primary calibration by dual centrifuge ISO 5347-8 1993
Primary calibration by high impact ISO 5347-10
Testing of transverse vibration ISO 5347-11 GB/T 20485.31 2011
Testing of transverse shock sensitivity ISO 5347-12 1993 GB/T 13823.9 1994
Testing of base strain sensitivity ISO 5347-13 1993
Resonance frequency testing of undamped accelerometers on a steel
ISO 5347-14 GB/T 13823.12 1995
block
Testing of acoustic sensitivity ISO 5347-15 1993 GB/T 13823.17 1996
Testing of mounting torque sensitivity ISO 5347-16 1993 GB/T 13823.5 1992
Testing of fixed temperature sensitivity ISO 5347-17 1993
Testing of transient temperature sensitivity ISO 5347-18 1993 GB/T 13823.15 1995
Testing of magnetic field sensitivity ISO 5347-19 1993 GB/T 13823.4 1992
54 Primary vibration calibration by the reciprocity method GOST R ISO
ISO 16063-12 2002 GB/T 20485.12 2008 2009
16063-12-2009
55 Accelerometer resonance testing - General methods ISO 5347-22 1997 GB/T 13823.20 2008
56 Balancing machines ISO 21940-21 2012
JIS B 7737 1995 GB/T 4201 2006 JJF1570 2016 GOST 20076-2007 2007
1 / 1 ページ