Professional Documents
Culture Documents
J-
3/2, MIDC Industrial Area, Chikalthana, Aurangabad, Maharashtra
Accreditation Standard ISO/IEC 17025: 2005
Certificate Number TC-8227 Page 1 of 41
Validity 21.12.2018 to 20.12.2020 Last Amended on --
“In view of the transition for ISO/IEC 17025:2017, the validity of this accreditation certificate will cease on
30.11.2020”
Sl. Product / Material Specific Test Performed Test Method Specification Range of Testing /
of Test against which tests are Limits of Detection
performed
CHEMICAL TESTING
A. Resin
1. PVC & Its K-value IS 4669-68 (RA-2008) 50 to 70
Copolymer Resin ASTM D 1785-15
ASTM D1243- 08
2. PVC Resin Sulphated Ash Content IS 4669: 1968 (RA-2003) 0.01% to 80 %
3. Unsaturated Volatile content IS 6746:1994 (RA-2005) 1 mg/kg to 350 mg/kg
Polyester Resin Annex-C
System
4. Chlorinated PVC Chlorine Content IS 15225:2002 (RA-2008) 0.01% to 70%
Compound Used
for Pipes & Fittings
Chlorinated IS 15778:2007 Annex-B
Polyvinyl Chloride
Pipes for potable
hot and cold water
distribution
supplies
B. Plastic Film
1. Low Density Carbon Black Content IS 2508-2016 / 0.01% to 60%
Polyethylene Film IS 2530-63 (RA-2008)
ASTM D 1603-14
Carbon Black Dispersion IS 2530-63 Qualitative
ASTM D 1603-06
IS 7328-74 Annex. B
Ash Content / filler content IS 14887:2014 Annex D 0.01% to 80 %
IS 2508:2016 (Black)/
ASTMD 5630-13/
ISO 3451 (Part 1:2008
MECHANICAL TESTING
11. UPVC Pipes for Soil Stress relief test IS 13592:2013 / Qualitative
and Waste IS 12235 (Part 6) 2004
Discharge System (RA-2009)
inside building IS 7834:1987 (RA-2008)
ventilation & Rain 11584:1986 Appendix. A
Water. IS 14735:1999 (RA-2009)
Specifications for IS 14757:2000 (RA-2010)
Injection moulded IS 16098:2013 (Part 1 & 2)
PVC socket fitting IS 12235:2004 Part-6
with solvent (RA-2009)
cement joints for
water supplies.
HDPE Crates for
Milk Sachets.
UPVC Injection
Moulding fitting for
Soil and Waste
Discharge System.
UPVC Pipes (Ducts)
and Fittings for
Underground
telecommunication
s Cable Installation.
Structured-Wall
Plastics Piping
Systems For Non-
Pressure Drainage
and Sewerage
19. PVC-U Pipes for Ring Stiffness / Pipe IS 15328:2003 Annex C 2 kN/m2 to 10 kN/m2
use in Underground Stiffness (RA-2008)
Drainage and IS 9271:2004 Annex A
Sewerage. (RA-2009)
UPVC Single Wall IS 16098:2013 Annex B
Corrugated Pipes IS 14402:1996 Annex B
for Drainage. (RA-2012)
Structured-Wall IS 12709:1994 (RA-2009)
Plastics Piping Annex B
Systems For Non-
Pressure Drainage
And Sewerage —
Specification.
GRP Pipes joints
and fittings
GRP Pipes joints
and fittings for use
of portable water
supplies
20. UPVC Pipes for Effect of sunlight IS 13592:2013 Qualitative
SWR System IS 12235 (Part 13):2004
Flexible PVC pipes (RA-2009)
or polymer IS 16098:2013 (part 2)
reinforced Annex D
Thermoplastic
hoses for
agriculture pumps.
Structured-Wall
Plastics Piping
Systems for Non-