Professional Documents
Culture Documents
Vdocuments - MX Electro-Hydraulic
Vdocuments - MX Electro-Hydraulic
Objective :
1. To assemble, test and trouble shoots (if necessary) and describes the operation of
hydraulic cylinder in tension, retraction and stopped positions.
2. To familiarizes the student with the applications of a 4/3-way valve 3.
3. To show how to use a piloted non-return valve
Introduction :
Hydraulics is the science of transmitting force and motion through the medium of a confined
liquid. Electro-hydraulic system is the combination of electrical and hydraulic system. The
range of applications for electro-hydraulic systems is diverse, and includes manufacturing
systems, materials test machines, suspension systems, mining machinery, fatigue testing,
flight simulation, paper machines, ships and electromagnetic marine engineering, injection
moulding machines, robotics, and steel and aluminium mill equipment. Hydraulic pumps,
motors, and cylinders can be combined into hydraulic drive systems. One or more hydraulic
pumps, coupled to one or more hydraulic motors, constitute a hydraulic transmission.
Hydraulic Circuit:
Motor
The range of applications for electro-hydraulic systems is almost same with hydraulic system,
but the main purposes electro hydraulic system compare to conventional system is to give
operator easily to operate. Since electro hydraulic use solenoids to generate the
electromagnetic for valve activation, operator not need manually (pull the lever or push the
button) activate the valve. This can save time, energy and can give this electro hydraulic
system more efficient and practical to use.
The typical application of this electro hydraulic system are include in manufacturing systems,
materials test machines, active suspension systems, mining machinery, fatigue testing, flight
simulation, paper machines, ships and electromagnetic marine engineering, injection molding
machines, robotics, and steel & aluminum mill equipment. The Hydraulic systems are also
common in aircrafts, where their high power-to-weight ratio and precise control makes them
an ideal choice for use in flight trajectory control.
Discussion:
The hydraulic system lab is good to study. Student can know about the system, application,
circuit diagram and the advantage of the hydraulic system. As for the discussion there are
some matters that have to be considering that will help to improve the lab. Firstly, the
hydraulic system have some working fluid leaking, this can be avoided by using pressure
sealant. Second, the system is a lot of mess and need for maintenance that could help
avoiding the apparatus to perform better and not broken.
Since the difference between conventional system and electro hydraulic system are not much
only on activation part, so the weaknesses of this system also almost same with conventional
system. Therefore the ways to improve this system are quite same with the hydraulic system.
As a conclusion the electro hydraulic system is not new. This lab could assist us more
to understand the principal of electro hydraulic system. The application of electro hydraulic
system might able to give extra skill to the student in hydraulic area that is useful for future
need. There are continuing improvement need to be made to maintain the effectiveness and
the performance of the system. As conclusion, the lab beneficial to student and the lab was
success.
REFERENCES:
1. http://en.wikipedia.org/wiki/Hydraulic_motor
2. http://en.wikipedia.org/wiki/Electrohydraulic_manual_transmission
3. http://material-
handling.globalspec.com/LearnMore/Flow_Transfer_Control/Valve_Actuators_Positi
oners/Hydraulic_Electrohydraulic_Valve_Actuators