Professional Documents
Culture Documents
Grupo R
Riser Jt, DG, Wt=0.875,Buoyant 7.5k' UL
M/N: 10112601
NOTES: 02
TOP
FASTENERS
ACCORDING TO PROCEDURE IN MATERIAL MASTERS
C NOTE 6, 8, 9 C
NOTE 6, 8, 9
NOTE 6 NOTE 6, 7, 9
DETAIL B
D D
02 DETAIL A 02 DETAIL C
NOTE 4
E E
DETAIL F
NO CLASH WITH CLAMPS Title
02 FOR BUOYANCY INSTALLATION Proprietary information
Riser Joint, Type=DG, L=75', Buoyant
AkerSolutions
This document contains Aker Subsea legal TM
entity proprietary and confidential information
NOTE 4 that is legally privileged and is intended only
for the person or entity to which it is addressed 21" Clip Drilling Riser System
and any unauthorised use is strictly prohibited.
F It is provided for limited purpose and shall not Assembly part of Aker F
be reproduced, stored electronically, transferred
DETAIL E to other documents, disseminated or disclosed
to any third parties without the prior written
Modified by
OHLSSON, ANNETTE
Originator
ANDRESEN, ARILD
Document no.
10000575646 02
Doc. ver. ECO no.
500000089512
SECTION D-D consent of the relevant Aker Subsea legal entity.
Any attachments are subject to the specific
restrictions and confidentiality regulations stated Checked by Material no. (part) Plant Release date Reason for issue
10046529 300 17.07.2013 Re-init for IFC
therein and shall be treated accordingly.
1 2 3 4 5 6 7 8
Item Component Object description Component Revision
Number quantity Level
0010 10066823 Riser Jt,Type=DG, Wt=0.875", L=75',Slick 1 01
0020 10112582 KIT, BUOYANCY, DG, ULTRA 7500', MATRIX 4 03
1 2 3 4 5 6 7 8
NOTES:
85 ±1
APPLIES TO ALL STOP NUTS
A NO A
TE
10 10
E
N OT
TO BE MARKED HERE, SEE NOTE 3.
84 ±7 20 40
APPLIES TO C&K
AND BOOSTER LINE
NOTE 4 E
LOGO IN AXIAL ORIENTATION TO BE
PAINTED ON BOTH SIDES OF THE BARREL
TO BE READ FROM LEFT TO RIGHT
F
NOTE 5 NOTE 6
B NOTE 6 B
AkerSolutions TM
NVD - XXXX
BOTTOM
TOP
C C
84 ±3
91 ±7 APPLIES TO ALL P-LINES
APPLIES TO
HYDRAULIC LINE
E
DETAIL A
D DETAIL B D
200
200
225
225
45
45
E E
+1
2 0 ( x4)
DETAIL F
Title
Proprietary information
Riser Joint, Type=DG, L=75', Slick
AkerSolutions
This document contains Aker Subsea legal TM
entity proprietary and confidential information
115 115
that is legally privileged and is intended only
for the person or entity to which it is addressed
and any unauthorised use is strictly prohibited.
21" Clip Drilling Riser System
F It is provided for limited purpose and shall not Assembly part of Aker F
be reproduced, stored electronically, transferred
to other documents, disseminated or disclosed Modified by Originator Document no. Doc. ver. ECO no.
LILJA, ANDERS ANDRESEN, ARILD 10000575077 02 500000088067
to any third parties without the prior written
consent of the relevant Aker Subsea legal entity.
SECTION E-E
Any attachments are subject to the specific
restrictions and confidentiality regulations stated Checked by Material no. (part) Plant Release date Reason for issue
VARIOUS 300 09.07.2013 In Work
therein and shall be treated accordingly.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
NOTES:
A A
B B
30
50 80 90
50
77
77
77
77
C C
495,6
495,6
135
135
135
60
135
60
D D
00
11
12
95
100
496 496
70
VIEW D - D
VIEW C - C
E E
Title
Proprietary information
Riser Joint, Type=DG, L=75', Slick
AkerSolutions
This document contains Aker Subsea legal TM
entity proprietary and confidential information
that is legally privileged and is intended only
for the person or entity to which it is addressed
and any unauthorised use is strictly prohibited.
21" Clip Drilling Riser System
F It is provided for limited purpose and shall not Assembly part of Aker F
be reproduced, stored electronically, transferred
to other documents, disseminated or disclosed Modified by Originator Document no. Doc. ver. ECO no.
LILJA, ANDERS ANDRESEN, ARILD 10000575077 02 500000088067
to any third parties without the prior written
consent of the relevant Aker Subsea legal entity.
Any attachments are subject to the specific
restrictions and confidentiality regulations stated Checked by Material no. (part) Plant Release date Reason for issue
VARIOUS 300 09.07.2013 In Work
therein and shall be treated accordingly.
1 2 3 4 5 6 7 8
Item Component Object description Component Revision
Number quantity Level
0010 10066822 Kit, Main Line, Ø21"x0.875", H10, L=75' 1 01
0020 10066364 Kit, Guide Plate Support, 25T 1 05
0030 10061892 KIT, GUIDE PLATE, TYPE=DG 1 04
0040 10066429 Kit, Buoyancy/Lifting Support, 25T 1 03
0050 10066328 Kit, P-Line, OD6,5" x ID4,5", L=75' 2 02
0060 10066321 Kit, P-Line, OD4,125"x ID3,5", L=75' 2 03
0070 10051170 Kit, P-Line, 5" x 0,5" x 75', White 1 02
0080 10066490 KIT, BRCKT, OD1= 6,5",OD2=4,125", RIGHT 1 02
0090 10066469 KIT, BRCKT, OD1=6,5", OD2=4,125", LEFT 1 02
0100 10050105 Kit, Booster Line Bracket, STD 1 04
0110 10066327 Assy, P-Line Clamp, TYPE=DG/DT 8 03
ITEM PART 3
QTY. DESCRIPTION MATERIAL VOLUME (m ) MASS (kg)
NO. NUMBER 5
1 1 610722 ASSY. MODULE A, MUX REFER TO PAGE 4 2.798 10 REFER TO PAGE 4
2 1 610723 ASSY. MODULE B, MUX REFER TO PAGE 4 1.121 10 REFER TO PAGE 4
3 1 610742 ASSY. MODULE C, MUX REFER TO PAGE 4 1.121 10 REFER TO PAGE 4 4
4 2 810290 DOUBLE-BOLT TENSIONER, 3/4" x 9" LONG STAINLESS STEEL 316 N/A 3.257
5 2 531545 STRAP, 58mm WIDE, CTRS-CTRS 4100mm ARAMID EVA COPOLYMER N/A 2.3
5232 6
MODULE LENGTH
9 274.6 TYP.
EFFECTIVE LENGTH DETAIL T
OF FLEX PAD SCALE 1 : 10
O/A WIDTH
1371
78.0 TYP.
STRAP GROOVE
1
58 [REF.]
STRAP WIDTH 2
ISOMETRIC VIEW
4 TOP VIEW MATRIX LABEL, ISO A3 SIZE 16
REFER TO NOTE #3. .0
X4
DETAIL W 5°
TY
14 EACH MODULE IS COLOUR CODED TO
SCALE 1 : 10 P. INDICATE DIFFERENT SERVICE DEPTH
W RATING. REFER TO PAGE 4 FOR DETAILS.
3440 9
FLEX PAD & STRAP SPACING
. MATRIX LABEL, ISO A5 SIZE 3
1301 2630 - SYMMETRICAL T YP V
12.00in REFER TO NOTE #3.
10 [REF.] CLAMP RECESS 1301 10 4 5°
X 305mm TYP.
383.7 TYP. .0 MODULE FLAT
U 30
[REF.]
498
C .]
19 AR
C
S- EF
S
TR
ACROSS FLATS
LE
O/A HEIGHT
TR [R
[ R AN
308 [REF.]
1337 [REF.]
EF C
1337 [REF.]
C 40
.] E
1
11
RECOMMENDED TIGHTENING
TORQUE : 54-66Nm [40-49 lbf-ft]
14
383.7 TYP. 4 FRONT VIEW SECTION U-U DETAIL V
U 460 SCALE 1 : 10
PAINT WIDTH
Tot. Mass: N/A Tot. Vol: N/A Mat'l: REFER TO BOM ABOVE Finish: N/A
GENERAL NOTES :
DRN: DATE: CLIENT: QUOTE / SO No.:
1. SEE ADDITIONAL SHEETS FOR DETAILS. DWG STATUS: RELEASED FOR AS-BUILT LAM 08/04/09 IF IN DOUBT ASK AKER SOLUTIONS SO 566
2. REFER TO PAGE 4 FOR NET LIFT. UNLESS OTHERWISE AGREED IN WRITING THIS DRAWING Check1: PROJECT:
www.matrixap.com.au SURFACE FINISH UNO By Peter Pezet at 5:06 pm, 7/12/10 SHEET
3 610637 A3 14
Item Component Object description Component Revision
Number quantity Level
0001 10184803 BUOYANCY MODULE A, 7500', ULTRA, 1 01
TYPE=DG
0002 10184642 BUOYANCY MODULE B, 7500', ULTRA, 1 01
TYPE=DG
0003 10184643 BUOYANCY MODULE C, 7500', ULTRA, 1 01
TYPE=DG
0004 10164690 DOUBLE BOLT TENSIONER, 3/4" x 9" LONG 2 02
0005 10181808 STRAP, ARAMID, 58MM WIDE 2 01
1 2 3 4 5 6 7 8
NOTES:
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETRES
ALL STANDARDS REFERRED TO SHALL BE THE CURRENT ISSUE
A B A
PNO: nnnnnnnn
SNR: PO No. - xxx
WHERE
• nnnnnnnn IS THE MATERIAL / BOM NUMBER
• PO No. IS THE PURCHASE ORDER NUMBER
B • xxx IS THE CONSECUTIVE PRODUCTION ORDER B
NUMBER FOR EACH ASSEMBLY
BOTTOM
TOP
C C
E NOTE 2
A
SECTION A-A
B
D D
50
20 30 60
20
40
E E
30
Title
Proprietary information
Kit, Main Line, Type=H10
AkerSolutions
This document contains Aker Subsea legal TM
entity proprietary and confidential information
that is legally privileged and is intended only
for the person or entity to which it is addressed
and any unauthorised use is strictly prohibited.
21" Clip Drilling Riser System
F It is provided for limited purpose and shall not Small Parts Assembly part of Aker F
be reproduced, stored electronically, transferred
to other documents, disseminated or disclosed Modified by Originator Document no. Doc. ver. ECO no.
ARNESEN, RUNE ANDRESEN, ARILD 10000576280 01
to any third parties without the prior written
consent of the relevant Aker Subsea legal entity.
Any attachments are subject to the specific
restrictions and confidentiality regulations stated Checked by Material no. (part) Plant Release date Reason for issue
VARIOUS 300 29.10.2009 Initiated IFC
therein and shall be treated accordingly.
1 2 3 4 5 6 7 8
Item Component Object description Component Revision
Number quantity Level
0010 10028932 M-Line Ø21" x 0,875" x 75', H10 1 08
0020 BBJ3550010 INDEXING BLOCK 2 A5
0030 10021174 Bolt, B18.3, 5/8-11x1.625, L7M, C-156.9 4 03
0040 BB176015 FTG GREASE ZERK, 10 MM 1.5 PITCH 4 03
0050 BB174893 SEAL, G .610CS 20.866ID 2 A2
0060 10051689 Kit,Lanyard Ø3/32"x18" 1 06
1 2 3 4 5 6 7 8
NOTES:
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETRES
ALL STANDARDS REFERRED TO SHALL BE THE CURRENT ISSUE
A A
779
CL
350
B B
A
B
D 2
1111
CL
C C
70 30 40
60
10
790
C
56
80 DETAIL B
0
1241
D D
DETAIL A
90 40 50
100 110
20
E E
DETAIL C DETAIL D 2
Title
Proprietary information
Kit, Guide Plate Support, 25T
AkerSolutions
This document contains Aker Subsea legal TM
entity proprietary and confidential information
that is legally privileged and is intended only
for the person or entity to which it is addressed
and any unauthorised use is strictly prohibited.
Clip Drilling Riser System
F It is provided for limited purpose and shall not Small Parts Assembly part of Aker F
be reproduced, stored electronically, transferred
to other documents, disseminated or disclosed Modified by Originator Document no. Doc. ver. ECO no.
ARNESEN, RUNE ANDRESEN, ARILD 10000574797 03 500000038066
to any third parties without the prior written
consent of the relevant Aker Subsea legal entity.
Any attachments are subject to the specific
restrictions and confidentiality regulations stated Checked by Material no. (part) Plant Release date Reason for issue
10066364 300 19.03.2010 Re-init for IFC
therein and shall be treated accordingly.
1 2 3 4 5 6 7 8
Item Component Object description Component Revision
Number quantity Level
0010 10091661 GP Support, Upper Half, 25T 1 04
0020 10012294 GP Support, Lower Half, STD, White 1 03
0030 10021182 Bolt, B18.2.1, 3/4-10x3, L7M, C-156.9 14 04
0040 10021172 WASHER,HELICAL SPRING-LOCK, 3/4" 22 03
Regular
0050 10021171 Nut, B18.2.2, 3/4-10, 7M, C-156.9 8 03
0060 10021250 Washer, ASME B18.21.1, Split-lock, 1" 1 04
0070 10021283 NUT HEX, 1-8UNC, 7M 1 03
0080 10033913 Bolt, B18.2.1, 1-8x5.5, L7M, C-156.9 1 03
0090 10034536 Bolt, B18.2.1, 3/4-10x3.5, L7M, C-156.9 8 03
0100 10105857 Bolt, B18.2.1, 1-8x3, L7M, C-156.9 4 02
0110 10021250 Washer, ASME B18.21.1, Split-lock, 1" 4 04
1 2 3 4 5 6 7 8
NOTES:
1. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE
IN MILLIMETERS, ALL STANDARS REFERRED TO
SHALL BE THE CURRENT ISSUE
A 2. TOLERANCING ISO 8015, GENERAL TOLERANCES A
44,5 ISO 2768-mk
3. TO BE MOUNTED ACCORDING TO SPECIFICATIONS
IN ASSEMBLY PROCEDURE
4. THE TOURQE SHALL BE INCREASED IN 3 STEPS:
310, 620, 1034 Nm.(30, 60 and 100%)
5. APPLY LOCTITE ACCORDING TO SPECIFICATIONS IN
ASSEMBLY PROCEDURE
11
95
110 100 90
Torque 200 Nm
B See Note 5 50 60 B
Torque 70 Nm
0
56
C C
DETAIL B
00
12
A
D D
20 30 40
E E
Title
Proprietary information
Kit, Guide Plate, Type=DG
AkerSolutions
This document contains Aker Subsea legal TM
entity proprietary and confidential information
70 80
that is legally privileged and is intended only
for the person or entity to which it is addressed
and any unauthorised use is strictly prohibited.
Standard Joints
F Small Parts Assembly part of Aker F
Torque: see note 3, 4 DETAIL C It is provided for limited purpose and shall not
be reproduced, stored electronically, transferred
to other documents, disseminated or disclosed Modified by Originator Document no. Doc. ver. ECO no.
VOGNSEN, LARS PETER S ANDRESEN, ARILD 10000574922 05 500000102438
to any third parties without the prior written
consent of the relevant Aker Subsea legal entity.
Any attachments are subject to the specific
1 2 3 4 5 6 7 8
Item Component Object description Component Revision
Number quantity Level
0010 10062455 Guide Plate Base, Type=DT 1 04
0020 10110740 STOP BOLT, 21 CLIP RISER, TYPE=CT 2 03
0030 10021260 NUT, B18.2.2, 7/8"-9, 7M, C-156.9 2 04
0040 10021261 WASHER, ASME B18.21.1, SPLIT-LOCK, 7/8" 2 04
0050 10037995 CLAVETTE KEY 21 CLIP (sub BBJ3550023) 2 04
0060 10021617 Bolt, B18.3, 1/2-13x1.5, L7M, C-156.9 2 01
0070 10076451 WASHER, SPRING LOCK 1 1/4 ASME 4 02
B18.21.1
0080 10019306 KIT,STUD BOLT, 1 1/4-8UNX7 3/4 W/ 2 NUTS 4 03
0090 10016874 Screw , Hex Hd, 3/4-10x5 tap bullnose 4 04
0100 10021171 Nut, B18.2.2, 3/4-10, 7M, C-156.9 4 03
0110 10021172 WASHER,HELICAL SPRING-LOCK, 3/4" 4 03
Regular
1 2 3 4 5 6 7 8
NOTES:
1. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN
MILLIMETRES
A ALL STANDARDS REFERRED TO SHALL BE THE CURRENT A
755,6 ISSUE
55
Note 2 145,7 2. MARK AT THIS LOCATION ACCORDING TO PROCEDURE
10000108841-PDC-000, MARKING TO BE READABLE
AFTER COATING
Note 3
3. TORQUE VALUE BOLTS POS. NO. 90: 912 Nm WHEN
MOUNTED TO THE CLIP CONNECTOR.
ENSURE LOCTITE 243 IS USED ON BOLTS AND NUTS
876,5
732
Note 5
C C
695,3 782
10 90 50
60 70 80
D D
40 30
20
80 60
732
E E
Title
Proprietary information
Kit, Buoyancy/Lifting Support, 25T
AkerSolutions
This document contains Aker Subsea legal TM
entity proprietary and confidential information
that is legally privileged and is intended only
for the person or entity to which it is addressed
and any unauthorised use is strictly prohibited.
Standard & Special Joints
F It is provided for limited purpose and shall not Small Parts Assembly part of Aker F
be reproduced, stored electronically, transferred
to other documents, disseminated or disclosed Modified by Originator Document no. Doc. ver. ECO no.
LILJA, ANDERS ANDRESEN, ARILD 10000574911 02 500000090765
to any third parties without the prior written
consent of the relevant Aker Subsea legal entity.
Any attachments are subject to the specific
restrictions and confidentiality regulations stated Checked by Material no. (part) Plant Release date Reason for issue
10066429 300 21.08.2013 In Work
therein and shall be treated accordingly.
1 2 3 4 5 6 7 8
Item Component Object description Component Revision
Number quantity Level
0010 10066547 BUOYANCY SUPPORT UPPER HALF, 25T 1 01
0020 10063985 Buoyancy Clamp, Lower Half, STD, White 1 01
0030 10028898 Bolt, ISO4762, M30x260, L7M, C-156.9 3 02
0040 10040863 Nut, ISO4032, M30, 7M, C-156.9 6 02
0050 10021281 Washer, DIN 127, Split-lock, M30, C156.9 2 04
0060 10021172 WASHER,HELICAL SPRING-LOCK, 3/4" 7 03
Regular
0070 10021171 Nut, B18.2.2, 3/4-10, 7M, C-156.9 4 03
0080 10034536 Bolt, B18.2.1, 3/4-10x3.5, L7M, C-156.9 7 03
0090 10090872 Bolt, ISO4762, M30x150, L7, C-156.9 2 02
1 2 3 4 5 6 7 8
NOTES:
1. STOP NUT LOCATION IS GIVEN IN FINAL ASSEMBLY
A
2. PIN MOUNTING TORQUE SPECIFIED IN ASSEMBLY
A A
PROCEDURE
B B
DETAIL D
DETAIL B DETAIL C
C
A C
20 20 40
B 10 C
50 D 30 60
D D
E SECTION A-A E
Title
Proprietary information
P-Line, OD6,5" x ID4,5"
AkerSolutions
This document contains Aker Subsea legal TM
entity proprietary and confidential information
that is legally privileged and is intended only
for the person or entity to which it is addressed
and any unauthorised use is strictly prohibited.
21" Clip Drilling Riser System
F It is provided for limited purpose and shall not Small Parts Assembly part of Aker F
be reproduced, stored electronically, transferred
to other documents, disseminated or disclosed Modified by Originator Document no. Doc. ver. ECO no.
ARNESEN, RUNE ANDRESEN, ARILD 10000576206 02 500000035509
to any third parties without the prior written
consent of the relevant Aker Subsea legal entity.
Any attachments are subject to the specific
restrictions and confidentiality regulations stated Checked by Material no. (part) Plant Release date Reason for issue
VARIOUS 300 14.01.2010 Re-init for IFC
therein and shall be treated accordingly.
1 2 3 4 5 6 7 8
Item Component Object description Component Revision
Number quantity Level
0010 10029047 Body, C&K ,75' Jt, OD 6.5"x1" 1 05
0020 10034377 Seal, S, OD178 ID164 4 05
0030 10028245 Stop Nut for 6,5" P-Line 1 04
0040 BB164791 Set Screw, B18.3, 1/2-13"x.5", A4,C156.9 2 01
0050 10034402 Seal, Thread Corrosion, ID 178 1 03
0060 10030473 Pin, Replaceable ID4,5" 1 06
1 2 3 4 5 6 7 8
NOTES:
1. STOP NUT LOCATION IS GIVEN IN FINAL ASSEMBLY
B B
DETAIL D
DETAIL B DETAIL C
A
C C
40 60
40 10
B C D 30
50
NOTE 1 & 2
D D
20
SECTION A-A
E E
Title
Proprietary information
P-Line, OD4,125" x ID3,5"
AkerSolutions
This document contains Aker Subsea legal TM
entity proprietary and confidential information
that is legally privileged and is intended only
for the person or entity to which it is addressed
and any unauthorised use is strictly prohibited.
21" Clip Drilling Riser System
F It is provided for limited purpose and shall not Small Parts Assembly part of Aker F
be reproduced, stored electronically, transferred
to other documents, disseminated or disclosed Modified by Originator Document no. Doc. ver. ECO no.
ARNESEN, RUNE ANDRESEN, ARILD 10000576252 02 500000035509
to any third parties without the prior written
consent of the relevant Aker Subsea legal entity.
Any attachments are subject to the specific
restrictions and confidentiality regulations stated Checked by Material no. (part) Plant Release date Reason for issue
VAROIUS 300 14.01.2010 Re-init for IFC
therein and shall be treated accordingly.
1 2 3 4 5 6 7 8
Item Component Object description Component Revision
Number quantity Level
0010 10028954 Hydr Line, 75' Jt, OD 4.125"x0.3125" 1 04
0020 10010814 Pin Replaceable, OD4.125"X ID 3.5" 1 10
0030 10010866 Stop Nut, 4,650"-4-2G Stub ACME Thread 1 04
0040 10185977 Lip Seal, OD117.42, ID104.9 4 01
0050 BB164791 Set Screw, B18.3, 1/2-13"x.5", A4,C156.9 2 01
0060 10010899 Seal, Thread Corrosion 1 03
1 2 3 4 5 6 7 8
NOTES:
A
1. STOP NUT LOCATION GIVEN UPON FINAL ASSEMBLY
B B
A
C 50 50 10 50 50 40 30 60 20 C
B C D
D D
SECTION A-A
E E
Title
Proprietary information
Assy, P-Line, Threaded Pin ed.
AkerSolutions
This document contains Aker Subsea legal TM
entity proprietary and confidential information
that is legally privileged and is intended only
for the person or entity to which it is addressed
and any unauthorised use is strictly prohibited.
21" Clip Drilling Riser
F It is provided for limited purpose and shall not
be reproduced, stored electronically, transferred
Small Parts Assembly part of Aker F
to other documents, disseminated or disclosed Modified by Originator Document no. Doc. ver. ECO no.
HANSEN, TROELS ANDRESEN, ARILD 10000491516 01
to any third parties without the prior written
consent of the relevant Aker Subsea legal entity.
Any attachments are subject to the specific
restrictions and confidentiality regulations stated Checked by Material no. (part) Plant Release date Reason for issue
SEE BOM 100 14.11.2008 In Work
therein and shall be treated accordingly.
1 2 3 4 5 6 7 8
Item Component Object description Component Revision
Number quantity Level
0010 10028822 P-Line, 5,0" x 0,5" x 75', White 1 06
0020 10010842 Pin, Replaceable 5,0" x 4,0" 1 09
0030 10010865 Stop Nut for 5" P-Line 1 05
0040 10010889 Seal, Thread Corrosion 1 04
0050 10012365 SEAL, S, OD143, ID129 4 06
0060 BB164791 Set Screw, B18.3, 1/2-13"x.5", A4,C156.9 2 01
1 2 3 4 5 6 7 8
NOTE:
30
B B
10
C C
40
20
D D
E E
Title
Proprietary information
Kit, Brkt, Type Double
AkerSolutions
This document contains Aker Subsea legal TM
entity proprietary and confidential information
that is legally privileged and is intended only
for the person or entity to which it is addressed
and any unauthorised use is strictly prohibited.
21" Clip Drilling Riser
F It is provided for limited purpose and shall not
be reproduced, stored electronically, transferred
Small Parts Assembly part of Aker F
to other documents, disseminated or disclosed Modified by Originator Document no. Doc. ver. ECO no.
HANSEN, JAN ANDRESEN, ARILD 10000492790 01
to any third parties without the prior written
consent of the relevant Aker Subsea legal entity.
Any attachments are subject to the specific
restrictions and confidentiality regulations stated Checked by Material no. (part) Plant Release date Reason for issue
100 11.11.2008 Initiated IFC
therein and shall be treated accordingly.
1 2 3 4 5 6 7 8
Item Component Object description Component Revision
Number quantity Level
0010 10028319 Bracket, Double, Bottom, 1, Right 1 03
0020 10028495 Bracket, Double, Top, 1, Right 1 03
0030 10028902 Bolt, B18.3, 1 1/4-7x11, L7M, C-156.9 3 03
0040 10021266 WASHER,ASME B18.21.1 SPLIT-LOCK, 1 3 03
1/4"
1 2 3 4 5 6 7 8
NOTE:
30
B B
10
C C
40
20
D D
E E
Title
Proprietary information
Kit, Brkt, Type Double
AkerSolutions
This document contains Aker Subsea legal TM
entity proprietary and confidential information
that is legally privileged and is intended only
for the person or entity to which it is addressed
and any unauthorised use is strictly prohibited.
21" Clip Drilling Riser
F It is provided for limited purpose and shall not
be reproduced, stored electronically, transferred
Small Parts Assembly part of Aker F
to other documents, disseminated or disclosed Modified by Originator Document no. Doc. ver. ECO no.
HANSEN, JAN ANDRESEN, ARILD 10000492790 01
to any third parties without the prior written
consent of the relevant Aker Subsea legal entity.
Any attachments are subject to the specific
restrictions and confidentiality regulations stated Checked by Material no. (part) Plant Release date Reason for issue
100 11.11.2008 Initiated IFC
therein and shall be treated accordingly.
1 2 3 4 5 6 7 8
Item Component Object description Component Revision
Number quantity Level
0010 10028321 Bracket, Double, Bottom, 1, Left 1 03
0020 10028494 Bracket, Double, Top, 1, Left 1 03
0030 10028902 Bolt, B18.3, 1 1/4-7x11, L7M, C-156.9 3 03
0040 10021266 WASHER,ASME B18.21.1 SPLIT-LOCK, 1 3 03
1/4"
1 2 3 4 5 6 7 8
NOTES:
1. UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN MILLIMETRES. ALL STANDARDS
REFFERED TO SHALL BE THE CURREMT ISSUE
A A
B B
C C
10
D D
30
E E
Title
Proprietary information
Kit, Brkt, Single, OD=5"
AkerSolutions
This document contains Aker Subsea legal TM
1 2 3 4 5 6 7 8
Item Component Object description Component Revision
Number quantity Level
0010 10028313 Bracket for 5" Line, Bottom 1 05
0020 10028316 Bracket for 5" Line, Top 1 04
0030 10021266 WASHER,ASME B18.21.1 SPLIT-LOCK, 1 2 03
1/4"
0040 10028902 Bolt, B18.3, 1 1/4-7x11, L7M, C-156.9 2 03
1 2 3 4 5 6 7 8
NOTES:
1. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN
MILLIMETERS, ALL STANDARS REFERRED TO SHALL BE
A THE CURRENT ISSUE A
2. TO BE MOUNTED ACCORDING TO SPECIFICATIONS IN
ASSEMBLY PROCEDURE
1259
3. APPLY LOCTITE ACCORDING TO SPECIFICATIONS IN
160 ASSEMBLY PROCEDURE
B B
53
7,4
0
899
NOTE 2
60
40
C C
10
20
90 80 100
Torque 127Nm
D 50 D
E 100 80 90 30 90 80 100 E
Torque 127Nm
Title
Proprietary information
Composite P-Line Clamp, TYPE=DG/DT
AkerSolutions
This document contains Aker Subsea legal TM
entity proprietary and confidential information
that is legally privileged and is intended only
for the person or entity to which it is addressed
and any unauthorised use is strictly prohibited.
Clip Driling Riser System
F It is provided for limited purpose and shall not Assembly Drawing part of Aker F
be reproduced, stored electronically, transferred
to other documents, disseminated or disclosed Modified by Originator Document no. Doc. ver. ECO no.
LILJA, ANDERS KAMYAB, ALI 10000841501 04 500000086778
to any third parties without the prior written
consent of the relevant Aker Subsea legal entity.
Any attachments are subject to the specific
restrictions and confidentiality regulations stated Checked by Material no. (part) Plant Release date Reason for issue
10066327 300 28.05.2013 In Work
therein and shall be treated accordingly.
1 2 3 4 5 6 7 8
Item Component Object description Component Revision
Number quantity Level
0010 10083743 COMPOSIT SHIMS, 1650x160x2,5 1 02
0020 10091174 P-LINE CLAMP, TYPE=DG/DT 2 00
0030 10099939 ASSY, BOOSTER BRACKET 1 01
0040 10091745 ASSY, C&K BRACKET, TYPE=DG/DT 2 02
0050 10091414 ASSY, HYDRAULIC BRACKET 2 02
0060 10082828 LOCKING MECHANISM COMPOSITE CLAMPS 1 02
0080 10033783 Bolt, ISO4014, M16x90, L7M, C-156.9 8 02
0090 10030160 Nut, ISO4032, M16, 7M, C-156.9 8 01
0100 10080184 Washer, DIN 125, M16, ASTM F 436M 16 02
1 2 3 4 5 6 7 8
NOTES:
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETRES
ALL STANDARDS REFERRED TO SHALL BE THE CURRENT ISSUE
A A
B B
C C
50
40
D D
10
20 30
E E
128
Title
Proprietary information
Locking Mechanism Composite Clamps
AkerSolutions
This document contains Aker Subsea legal TM
entity proprietary and confidential information
that is legally privileged and is intended only
for the person or entity to which it is addressed
and any unauthorised use is strictly prohibited.
21" Clip Drilling Riser System
F It is provided for limited purpose and shall not Small Parts Assembly part of Aker F
be reproduced, stored electronically, transferred
to other documents, disseminated or disclosed Modified by Originator Document no. Doc. ver. ECO no.
10000755314 03 500000045335
to any third parties without the prior written
consent of the relevant Aker Subsea legal entity.
Any attachments are subject to the specific
THORESEN, PER KAMYAB, ALI
restrictions and confidentiality regulations stated Checked by Material no. (part) Plant Release date Reason for issue
10082828 300 25.10.2010 In Work
therein and shall be treated accordingly.
1 2 3 4 5 6 7 8
Item Component Object description Component Revision
Number quantity Level
0010 10082826 SPECIAL NUT, M27, ASTM A194 Gr 7 1 01
0020 10082820 CONNECTOR, M27 2 02
0030 10082824 Bolt, ISO4762, M27x280, L7, C-156.9 1 03
0040 10114172 Tight Band, 6-strings, width=38mm 2 01
0050 10114173 Composite shim, 1605x45x2,5mm 2 00