Professional Documents
Culture Documents
components. The components used to assemble our range are sourced from
the reliable and authentic supply chain who have years of experience in this
domain. Our entire range of products is manufactured under the stringent
guiding principles of our quality experts who assure flawless delivery of
consignment in the market.
Products offered by us include :
Coarse Bubble Disc Membrane Diffusers
Coarse Bubble Tube Diffusers
Fine Bubble Disc Membrane Diffusers
Fine Bubble Tube Membrane Diffusers
Fine Bubble Board Membrane Diffusers
Fine Bubble Plate Membrane Diffusers
Fine Bubble Vertical Membrane Diffusers
Twin / Tri Lobe Air Blowers
Bio-Filter Media
Bio-Rex Media
Bio-Fill Media
Bio-Cling Media
Bio-Roto Media
Tube Set Media-Chevron
Tube Set Media-Hexagonal
Tube Set Media-Square
Plate Filter Press
Belt Filter Press
Centrifuge-Basket type
Automatic / Manual Oil Skimmers
Agitators / Blenders / Mixers
Mechanical Surface Aerators - Fixed & Floating
Clariflocculator / Clarifier Scrapper Mechanism
PSF / DMF / MMF / ACF / IRF / Pressure Vessels
Screw Screen System
UV Disinfection System
AQUA-KLEAN Microbes Culture
Expansion Joint - Rubber / Fabric / Metallic
Instrumentation / Sensors
Dosing Pump (Diaphragm / Plunger)
Diffused Aeration Systems
Chemical Dosing Systems
Various Products for WTP, STP, ETP, RO Systems
DISC TYPE SLEEVE TYPE VERTICAL TYPE BOARD TYPE PLATE TYPE
A porous Tube or Disc or Strip through which air is forced and divided into
minute bubbles for diffusion in the water thereby increasing the oxygen
quantity in the water or the fluid. This is advanced in the view of better
performance, high oxygen transfer efficiency, low power consumption and
cost effective due to low maintenance.
Fine bubble membrane diffuser generally delivers greatest energy saving
When they can be distributed in more uniform distribution on the floor of the basin.
In diffused type of aeration system the size of the bubble play a major role. Bubble diameter can critically
affect process efficiency because it determines the surface area of the bubbles.
Surprisingly, the most important factor has been found to be the ratio of the surface energy of the diffuser
material at the water interface to the surface tension of the liquid. The higher the ratio, the smaller the
bubbles.
Structure:
Perforated Membrane with Low Plasticizer EPDM / SILICON rubber compound.
Membrane Support Base with u PVC / PP of high pressure.
Membrane with micro slits to prevent clogging and back flow with flexibility of air volume.
Membrane rim sealed with the base with stainless steel screw for prevention of side leakage.
Advantage
• High oxygen transfer efficiency.
• High resistance to clogging.
• High resistance to corrosion.
• Small diameter of air bubble.
• Wide air flow range.
• Low pressure loss.
• Low energy cost.
• Easy installation.
• Water-stirring effect.
• Back flow prevention.
• Self cleaning operation.
• Self cleaning operation.
• Intermittent operation capability.
Application
• Municipal wastewater treatment.
• Intermittent operation capability.
• Raw water treatment.
• Sludge stabilization.
• Aeration of fish ponds.
• Aeration of streams and lakes.
BACK TOP
BIO-FILTER MEDIA
BIO REX MEDIA BIO CLING MEDIA BIO SHEET MEDIA BIO FILL MEDIA
The suspension biological packing is called BIO-FILTER MEDIA. The BIO-FILTER MEDIA is made of
polypropylene/ Polyethylene/ Special Polymer Quality. Its modified polymeric materials with the promoted
• To t a l Wa t e r & Wa s t e Wa t e r S o l u t i o n s •
additions of bio-emzyme, it improves the enzymatic catalysis, so it possess excellences of larger specific
surface, being easy to multiply biofilm, difficult falling off, high denitrification, good hydrophile, high
biological activity and so on. The Bio Media provided from us is self cleaning and provide excellent surface
ratio. The Bio-Film grows on the bio media surface that moves along with the water inside the reactor
chamberand creates “Attach Microbe Bed” which carries the Biomass, also known as MBBR = Moving Bed
Bio Reactors. The biofilm carrier elements are produced from a material and with a procedure that provides
proper storage and usage, ensures a minimum aging time of 20 years. The media is self-cleaning, never
needing backwashing.
FEATURES/ADVANTAGES
Made of High Grade Polypropylene material
Cylindrical Internal & External fins configuration
design ensure 100% clog free system
Resistant to the attack of rot, fungi, bacteria and other
microorganisms. Resistant to normal concentration of
wastewater acid, alkali, organic solvents and organic
compounds
Rigid and strong structurally
Uniform self-distribution
Long contact time between wastewater and the media
Easily expandable by extra addition of media elements
in the existing biofilter tank
APPLICATIONS
Multi Sewer System Paper and Pulp Industry
Upgrade of older Plants Most Application with Organic Waste
Food Industry Oil and water Separation
Poultry Bio Media can Function as Buffer System
Dairy’s Aqua Culture & Fisheries
Water Treatment process- generates huge quantities of SLUDGE in slurry form. This device works on
the principle of pressure feeding due to which it delis optimum output at the site of installation. W2P has
a unique Sludge de watering Equipment for the de-watering of the sludge and recovering the filtrate
media i.e. water or process liquids. The moisture content remains very low & sludge is taken out in care
form it is manual or hydraulic operated hence the closing & opening operation is very easy & can be
operated by unskilled labor. The dry cake sludge reduces the overall weight of the WWTP sludge there
by the disposal cost of the same. A feeding pump is used to force liquid through the medium leaving
solid particles trapped inside. W2P-Dewatering System can also be used for recovery of Oil from
surface grinding operations where Oil is used & re-circulated to the Grinders.
FEATURES/ADVANTAGES
Long Working life due to excellent resistance at high temperature.
Lightweight makes handling easier.
Resistant to most acids, alkalis, chemicals and abrasion.
Less cost of installation and maintenance
Easy to operate and maintenance
Long service life
Maximum filtration efficiency
APPLICATIONS
ETP, STP,WTP,WWTP for various industries Metals, metal finishing, minerals
Petrochemical, oily slurries and paint sludge Tanneries and textile waste
Chemical solid-liquid separation processes Environmental Remediation
Corrosive, acidic, alkaline slurry filtration Pre-filtration & Clarification
sludge is introduced through a hopper to gravity drainage section where thickening takes
place through the drainage of free water through the belt. Suspended solids concentration
increases in this section. Following this sludge is subjected to gradual increasing pressure by
squeezing opposing belt fabric. The belts are held in place by series of rollers that subjects
the sludge to shearing forces as belt pass through a series of rollers that define a serpentine
path. Theses forces thus introduced release additional quantities of water from sludge
increasing the solid content further. A countinous water spray keeps the pores of belt get
plugged. The sludge cake is out at the out let end.
FEATURES
Very low power consumption.
Low polymer usage.
Long bearing life.
Consistent cake solids
Automatic running.
Full enclosure option for odour prevention
ADVANTAGES APPLICATIONS
Low 'whole-life' costs. Sewage treatment plant Mineral Industries
Water treatment plant Paper Industries
Process reliability
Chemical Industries Food Industries
Process compliance Pharmaceutical Industries
Plant reliability
Minimal operator input
Outdoor operation
Proven cost effective dewatering
the rotating basket. The slurry to be filtered is fed through the feed nozzles to the basket and
due to centrifugal force the liquid is forced out through the filter media while solids are
retained within the filter media inside the basket. These solids then separated are discharged
by various discharging methods namely- manually, bag lifting basket, through scrapper,
operated manually/ pneumatically/ hydraulically, for which different models are available.
TYPES OF CENTRIFUGE
UNI BELT UNI TUBE UNI DISK MULTI BELT MULTI DISK
An oil skimmer is a special equipment that removes oil floating on the surface of water. Oil
contamination of waste water is a serious problem, and proper water decontamination is no
• To t a l Wa t e r & Wa s t e Wa t e r S o l u t i o n s •
longer optional for any ethical enterprise. It is absolutely critical to the health of our planet and the
human species that we keep our water supply free of contamination, especially petrochemicals.
We have simply stressed the resources of the Earth too far for further heedless exploitation. With
intelligent use and management we will probably be able to extend our comfortable dominion
over nature indefinitely, but callous disregard for environmental consequence is no longer
possible for any moral or honest human being.
FEATURES/ADVANTAGES
Helps maintain requirement of water discharge as per Govt. Pollution
Control Norms.
Reduces Oil content less than 10 ppm in water / Effluent / CETP final
discharge.
Greatly reduces oil disposal cost and makes reuse of recovered oil for
general lubrication purposes / Boiler Fuel / companies reclaiming oil.
It lifts and separates oil from pit with any draft without the use of
Pumps.
Negligible maintenance, minimal power and easy to operate.
Unit efficiently operates in hazardous as well as in turbulence /
fluctuating flow of liquid / effluent in drain.
Easy to install, use and maintain without any extra cost & spares.
Continuous operation of unit without any labor.
APPLICATIONS
Wastewater Sumps Steel Mills/Scale Pits
Coolants and Cutting Fluids Parking Lots, Garages and Service Facilities
Heat Treating Outdoor Ponds, Lakes, Basins, Etc
Parts Washers Recovery/Monitoring Wells
Food Processing Facilities
QUALITY
We are a client centric organization that believes in offering high quality Industrial Process Equipment to
the clients. All the raw material used by us is procured from reliable vendors to ensure unmatched quality.
Further, we have a team of quality experts that checks our range at various levels of production. Such an
extensive quality management program has enabled us to offer high quality equipment consistently to the
clients.
Some of the quality tests done by us are as follows:
Material Testing
Tensile Test
Chemical Analysis
Radiography for Weld Joints
D.P. testing for Weld Joints
Agitator Running Trials & other NDT
Hydraulic & Pneumatic testing of Vessels