Professional Documents
Culture Documents
Ca 1037 PDF
Ca 1037 PDF
1
2
CHERRY SST ® INDEX
Cherry SST® Features and Benefits...............................................................................................3
Installation........................................................................................................................................4
Head Styles ......................................................................................................................................4
Rivet Selection..................................................................................................................................5
Numbering System............................................................................................................................5
Mechanical Properties.......................................................................................................................5
Minimum Rivet Shear & Tensile Strength (lbs.) in Steel Coupons........................................................5
Installed Weight (pounds per 1000 pieces)........................................................................................5
Cherry SST® Blind Rivets Standards Pages............................................................................. 6–10
Universal Head Nominal Diameter.....................................................................................................6
100° Flush Head Nominal Diameter..................................................................................................7
100° NAS1097 Flush Head Nominal Diameter...................................................................................8
Universal Head Oversize Diameter.....................................................................................................9
Flush Head Oversize Diameter.........................................................................................................10
Cherry SST® Installation Tooling........................................................................................... 11–14
Tool Selection Chart........................................................................................................................11
G747 Power Riveter........................................................................................................................13
G704B Pneumatic Riveter................................................................................................................13
G800 Hand riveter..........................................................................................................................14
Pulling Heads..................................................................................................................................14
LIMITED WARRANTY
Seller warrants the goods conform to applicable specifications and drawings and will be manufactured and inspected
according to generally accepted practices of companies manufacturing industrial or aerospace fasteners. In the event of
any breach of the foregoing warranty, Buyer’s sole remedy shall be to return defective goods (after receiving authorization
from Seller) for replacement or refund of the purchase price, at the Seller’s option. Seller agrees to any freight costs in
connection with the return of any defective goods, but any costs relating to removal of the defective or nonconforming
goods or installation of replacement goods shall be Buyer’s responsibility. SELLER’S WARRANTY DOES NOT APPLY WHEN
ANY PHYSICAL OR CHEMICAL CHANGE IN THE FORM OF THE PRODUCT IS MADE BY BUYER. THE FOREGOING EXPRESS
WARRANTY AND REMEDY ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES AND REMEDIES; ANY IMPLIED
WARRANTY AS TO QUALITY, FITNESS FOR PURPOSE, OR MERCHANTABILITY IS HEREBY SPECIFICALLY DISCLAIMED AND
EXCLUDED BY SELLER. This warranty is void if seller is not notified in writing of any rejection of the goods within one (1)
Year aFter initial use by buyer of any power Riveter or ninety (90) days after initial use of any other product.
Seller shall not be liable under any circumstances for incidental, special or consequential damages arising in whole or in
part from any breach by Seller, AND SUCH INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES ARE HEREBY EXPRESSLY
EXCLUDED.
Our policy is one of continuous development. Specifications shown in this document may be subject to changes introduced
after publication.
CHERRY®, CHERRYMAX®, MAXIBOLT® and SST® are trademarks of Cherry Aerospace.
NOTE
The properties, strengths, dimensions, installed characteristics and all other information in this catalog is for guid-
ance only to aid in the correct selection of the products described herein and is not intended or implied as part of
the warranty. All applications should be evaluated for functional suitability and available samples of the described
parts can be requested for installed tests, suitability and evaluations.
ATTENTION
Blind rivets are not always a suitable substitute for solid rivets. Maintenance personnel are reminded that AC
43.13-1A chapter 2, section 3, stipulates: “Do not substitute hollow rivets for solid rivets in load carrying mem-
bers without specific approval of the application by a representative of the Federal Aviation Administration. Blind
rivets may be used in blind locations in accordance with the conditions listed in Chapter 5, provided the edge
distances and spacings are not less that the minimum listed in paragraph 99d.”
3
CHERRY SST ® BLIND RIVET SELECTION
INSTALLATION
1 The Cherry SST® Blind 2 The pulling head holds 3 Continued pulling action 4 Pressure of the driving
Rivet is inserted into the rivet in place as firmly clamps the sheets anvil cold forms the
the prepared hole. The it begins to pull the together. The rivet locking collar into the
pulling head (Installation rivet stem through the head is securely seated recess head of the
Tool) is slipped over the rivet sleeve. The rivet and the rivet sleeve fastener. Continued
stem. Applying firm starts to compress the expands to fill the hole. pulling fractures the
pressure, which seats the two sheets together. stem, providing a flush
rivet head, the installation burr-free installation.
tool is actuated
HEAD STYLES
4
CHERRY SST ® BLIND RIVET SELECTION
RIVET SELECTION
NUMBERING SYSTEM INSTALLED WEIGHT (pounds per 1000 pieces)
Cherry Part Number Example: Grip -4 -5 -6
CR6253 -6 -05 Style Length Diameter Diameter Diameter
CR6252 -02 .83 1.42 2.14
Grip Dash No. (Maximum -03 1.00 1.71 2.49
Grip Length in 16ths of an -04 1.18 1.92 2.84
inch) -05 1.35 2.20 3.25
-06 1.53 2.48 3.62
Diameter Dash No. -07 1.71 2.76 3.97
(Normal Diameter in 1/32 -08 1.89 3.05 4.34
of an inch) -09 2.07 3.33 4.72
-10 — — 5.10
Basic Part No. (Material, CR6253 -01 .88 1.57 2.55
Head Style, Series) -02 1.07 1.85 2.89
-03 1.25 2.13 3.22
-04 1.43 2.40 3.59
-05 1.62 2.68 3.96
-06 1.80 2.96 4.31
-07 1.98 3.24 4.78
MECHANICAL PROPERTIES -08 2.16 3.52 5.18
-09 2.35 3.80 5.56
Material -10 — — 5.93
Ultimate Maximum
Sleeve Stem Shear Strength Temperature CR6222 -02 .71 1.21 1.80
-03 .84 1.42 2.13
5056 Aluminum A-286 CRES 50,000 PSI 250° F -04 .97 1.64 2.45
-05 1.09 1.86 2.77
-06 1.22 2.07 3.09
-07 1.35 2.28 3.41
-08 1.47 2.50 3.73
MINIMUM RIVET SHEAR & TENSILE -09 1.60 2.71 4.05
-10 1.73 2.93 4.37
STRENGTH (LBS.) IN STEEL COUPONS
CR6223 -01 .85 1.45 2.16
Single Shear Tensile -02 .99 1.68 2.50
-03 1.12 1.90 2.84
Nominal O/S Nominal O/S
-04 1.26 2.13 3.18
CR6222 -05 1.39 2.35 3.51
Rivet Sheet CR6223 CR6252 CR6222 CR6252 -06 1.52 2.58 3.85
Diameter Thickness CR6224 CR6253 CR6223 CR6224 CR6253 -07 1.66 2.81 4.19
-08 1.79 3.04 4.53
1/8" (-4) 2 x .156" 664 814 285 250 345 -09 1.93 3.26 4.87
-10 2.06 3.49 5.21
5/32" (-5) 2 x .187" 1030 1245 445 390 530
CR6224 -02 .67 1.14 1.71
3/16" (-6) 2 x .219" 1480 1685 635 560 710 -03 .80 1.35 2.02
-04 .92 1.56 2.32
-05 1.04 1.76 2.63
-06 1.16 1.96 2.93
-07 1.28 2.17 3.23
-08 1.40 2.37 3.54
-09 1.52 2.57 3.84
-10 1.64 2.78 4.14
5
CHERRY SST ® BLIND RIVET SYSTEM
UNIVERSAL HEAD NOMINAL DIAMETER
Material ➂ Finish
Rivet Lock
Number Sleeve Stem Lock Collar Expander Sleeve Stem Collar Expander
A-286 CRES AMS 5731
OR
5056 CHEM FILM
A-286 CRES A-286 CRES 300 SERIES CRES PASSIVATE PASSIVATE PASSIVATE
CR6223 ALUMINUM MIL-C-5541
AMS 5731 AMS 5731 PER ASTM-A-493 AMS 2700 AMS 2700 AMS 2700
QQ-A-430 PLAIN COLOR
OR
ASTM-A-581
➀ ead markings and lock collar visible after installation. Head markings depressed .010 max.
H
➁ Minimum blind side clearance for satisfactory installation.
➂ Material designation refers to chemical composition only.
➃ Expander may be 1 or 2 piece design.
➄ Minimum grip for -4 dia. is .025, for -5 dia. is .031, and for -6 dia. is .037.
6
CHERRY SST ® BLIND RIVET SYSTEM
100° FLUSH HEAD NOMINAL DIAMETER
Material ➂ Finish
Rivet Lock
Number Sleeve Stem Lock Collar Expander Sleeve Stem Collar Expander
A-286 CRES AMS 5731
OR
5056 CHEM FILM
A-286 CRES A-286 CRES 300 SERIES CRES PASSIVATE PASSIVATE PASSIVATE
CR6222 ALUMINUM MIL-C-5541
AMS 5731 AMS 5731 PER ASTM-A-493 AMS 2700 AMS 2700 AMS 2700
QQ-A-430 PLAIN COLOR
OR
ASTM-A-581
➀ ead markings and lock collar visible after installation. Head markings depressed .010 max.
H
➁ Minimum blind side clearance for satisfactory installation.
➂ Material designation refers to chemical composition only.
➃ Expander may be 1 or 2 piece design.
➄ Minimum grip for -4 dia. is .025, for -5 dia. is .031, and for -6 dia. is .037.
➅ Theoretical diameter "A" max. and head height "B" max. are for engineering reference only.
7
CHERRY SST ® BLIND RIVET SYSTEM
100° NAS1097 FLUSH HEAD NOMINAL DIAMETER
Material ➂ Finish
Rivet Lock
Number Sleeve Stem Lock Collar Expander Sleeve Stem Collar Expander
A-286 CRES AMS 5731
OR
5056 CHEM FILM
A-286 CRES A-286 CRES 300 SERIES CRES PASSIVATE PASSIVATE PASSIVATE
CR6224 ALUMINUM MIL-C-5541
AMS 5731 AMS 5731 PER ASTM-A-493 AMS 2700 AMS 2700 AMS 2700
QQ-A-430 PLAIN COLOR
OR
ASTM-A-581
➀ ead markings and lock collar visible after installation. Head markings depressed .010 max.
H
➁ Minimum blind side clearance for satisfactory installation.
➂ Material designation refers to chemical composition only.
➃ Expander may be 1 or 2 piece design.
➄ Minimum grip for -4 dia. is .025, for -5 dia. is .031, and for -6 dia. is .037.
➅ Theoretical diameter "A" max. and head height "B" max. are for engineering reference only.
8
CHERRY SST ® BLIND RIVET SYSTEM
UNIVERSAL HEAD OVERSIZE DIAMETER
Material ➂ Finish
Rivet Lock
Number Sleeve Stem Lock Collar Expander Sleeve Stem Collar Expander
A-286 CRES AMS 5731
OR
5056 CHEM FILM
A-286 CRES A-286 CRES 300 SERIES CRES PASSIVATE PASSIVATE PASSIVATE
CR6253 ALUMINUM MIL-C-5541
AMS 5731 AMS 5731 PER ASTM-A-493 AMS 2700 AMS 2700 AMS 2700
QQ-A-430 PLAIN COLOR
OR
ASTM-A-581
➀ ead markings and lock collar visible after installation. Head markings depressed .010 max.
H
➁ Minimum blind side clearance for satisfactory installation.
➂ Material designation refers to chemical composition only.
➃ Expander may be 1 or 2 piece design.
➄ Minimum grip for -4 dia. is .025, for -5 dia. is .031, and for -6 dia. is .037.
9
CHERRY SST ® BLIND RIVET SYSTEM
FLUSH HEAD OVERSIZE DIAMETER
Material ➂ Finish
Rivet Lock
Number Sleeve Stem Lock Collar Expander Sleeve Stem Collar Expander
A-286 CRES AMS 5731
OR
5056 CHEM FILM
A-286 CRES A-286 CRES 300 SERIES CRES PASSIVATE PASSIVATE PASSIVATE
CR6252 ALUMINUM MIL-C-5541
AMS 5731 AMS 5731 PER ASTM-A-493 AMS 2700 AMS 2700 AMS 2700
QQ-A-430 PLAIN COLOR
OR
ASTM-A-581
➀ ead markings and lock collar visible after installation. Head markings depressed .010 max.
H
➁ Minimum blind side clearance for satisfactory installation.
➂ Material designation refers to chemical composition only.
➃ Expander may be 1 or 2 piece design.
➄ Minimum grip for -4 dia. is .025, for -5 dia. is .031, and for -6 dia. is .037.
➅ Theoretical diameter "A" max. and head height "B" max. are for engineering reference only.
10
CHERRY SST ® BLIND RIVET SYSTEM
INSTALLATION TOOLING
G27 —
Hand
G800 —
G686B-S H680B200A
G689 H680B200A
G700 H680B200A
H701B-456
G704B H753A-456
G704B-40SH
G704B-SR H781-456
H782
H846A-456
G744
Power H846A-456
H701B-456
H753A-456
G746A
H781-456
H782
H701B-456
G747 H753A-456
H781-456
G784 H680B200A
For more information regarding tooling combinations, please contact Technical Services, Cherry Aerospace, Santa Ana, CA 714-850-6022.
11
THE VERSATILITY OF CHERRY TOOLING
3
2
1
7
8
6
2
5 8
12
CHERRY SST ® BLIND RIVET SYSTEM
INSTALLATION TOOLING
➤
Cherry Aerospace weighs only 3.625 pounds, yet has
➤
➤
➤
the power of much larger and heavier tools. The G747 10°
Lightweight power riveter installs -4, -5 and -6 SST®
➤
and CherryMax® rivets in all grips and materials. The
lightweight and compact ergonomic design of the G747
tool greatly reduces operator fatigue. The angled pulling
head allows the operator to install rivets using a natural
hand position for optimum comfort. This tool can be
operated in any position with one hand, and offers a
choice of straight, right angle, and offset pulling heads. 2" ➤
➤
(50.8 mm) 11.37"
SPECIFICATIONS (288.8 mm)
➤
G704B PNEUMATIC RIVETER
NSN 5130-01-393-1584
Military Part Number M85188T2
The Cherry G704B is a pneumatic-hydraulic tool designed
specifically for the most efficient installation of SST®
and CherryMAX® rivets. It weighs 4.25 lbs. and can
be operated in any position with one hand. It has
a .518" rivet setting stroke and a rated pull load of
3,136 pounds with 90 psi air pressure at the air inlet.
Pulling heads are not furnished with this
riveter and must be ordered separately.
The straight H701B-456, right angle H753A-456,
and the offset H781-456 pulling heads fit directly on
the G704B riveter to install SST® and CherryMAX®
rivets. Extensions are available for extending the
pulling heads and to reach limited access areas. See
the CherryMAX® catalog for more information.
The G704B riveter, using the pulling heads
listed, will install SST and CherryMAX®
Bulb rivets in 1/8", and 5/32", and 3/16"
nominal and oversize diameters in all head styles and materials.
This riveter will install short grip, serrated stem MS-type rivets using either the H9015
(with the 704A9 adapter) or H9040 (with the 704A6 adapter) pulling heads.
13
CHERRY SST ® BLIND RIVET SYSTEM
INSTALLATION TOOLING
PULLING HEADS
➤ 4.375" ➤
1.75"
➤
1.438" ➤
.188"
➤
.75" 1.281"
➤
5.4386" ➤
➤ 5.59" ➤
➤
4.59" ➤
1.53"
➤
.250"
➤
1.0" 2.25"
➤
➤
➤
.375"
14
SPS Fastener Division, a PCC Company