Professional Documents
Culture Documents
Display: Triple 3-digit Back-Lighted LCD (Target speed, Trigger: The trigger performs a dual function. If transmit
Lock/Fast speed, and Patrol speed*) plus Mode mode has been selected by the keyboard key,
and Test indicators and speaker volume symbol then the trigger performs the LOCK/REL function.
If hold has been selected by the keyboard, then
Fastest Display: Shows speed of the fastest target when a stronger the trigger performs the XMIT/HOLD function,
slower target is present transmitting when the trigger is pressed and
switching to hold when the trigger is released.
MICROWAVE SPECIFICATIONS While transmitting, the XMIT indicator will be on.
Antenna: Built-in Dual Rectangular Horn BAT Indicator: Begins flashing when Battery voltage falls to 6.6
volts, warning that the battery is getting weak.
Polarization: Vertical Changes to a Flashing BAT FAIL when the battery
3 db Beamwidth: 9 degrees nominal voltage falls to 6.1 volts indicating a discharged
Microwave Source: Gunn-Effect diode battery. Operation is inhibited when BAT FAIL is
Receiver Type: Direct Conversion Homodyne using low-noise detected.
Schottky barrier mixer diode RFI Indicator: Indicates the presence of an interfering signal.
Power Output: 10 mw minimum Operation is inhibited during a RFI indication
25 mw nominal
50 mw maximum *These functions do not operate in "STATIONARY ONLY" STALKERS
2
Power Density: 2 mw/cm maximum at 5 inches from lens Specifications subject to change without notice