Professional Documents
Culture Documents
Design of Members for Flexure using the Steel Construction Manual (13th Ed.)
For Doubly Symmetric I-shaped Members Bent Around their Major Axis
Element λ λp λr
bf 0.38 E 1.0 E
Flange = 5.79 = 9.15 = 24.08
2tf Fy Fy
Classification of
h 3.76 E 5.70 E
Shapes Web = 38.20 = 90.55 = 137.27
tw Fy Fy
Mn = 967.87 kip-in
Results Mn = 80.66 kip-ft
Summary
Mn/Ω = 48.30 kip-ft (Ωb = 1.67)
Notes:
• The Results Summary above is broken down below
• The "Classification of Shapes" section is used to check for Flange Local Buckling and whether or not the shape is compact
c= 1 (F2-8a)
0.7Fy Sxho
Lr = 1.95rts
E
0.7Fy
Jc
Sxho
1+ 1 + 6.76 ( ) = 167.05 in = 13.92 ft (F2-6)
E Jc
Lb = 23 ft
for Lb ≤ Lp (yielding)
Mn = Mp = FyZx (F2-1)
Lateral-Torsional
Buckling (F2,F3) for Lp < Lb ≤ Lr
Lb - Lp
Mn = Cb [ M - (M - 0.7F S )
p p y x
( Lr - L p )] ≤ M p
(F2-2)
for Lb > Lr
Mn = FcrSx ≤ Mp (F2-3)
Cbπ2E Jc Lb
Fcr =
(Lb/rts)2
1 + .078
Sxho ( rts )2 (F2-4)
Lb > Lr
therefore, Mn = 967.87 kip-in
flange is compact
therefore, Mn = NA
Notes:
• For doubly symmetric I-shaped members bent about their major axis
• Designed using the AISC 13th Ed (AISC 360).
•• See Chapter F in the Specifications for complete details
http://www.wikiengineer.com/Structural/SteelI-BeamFlexuralStrengthSpreadsheet
Ed.)