Professional Documents
Culture Documents
www.YAMASEIKI.com
TURNING CENTERS by
GA Series Construction Spindle Turret Multi-Tasking
Engineered to handle heav y- dut y turning applications with superb accurac y, the GA
series ultra per formance turning centers combine ex tremely power ful high torque
motors, super rigid box way construc tions, and large diameter ser vo indexing turrets to
bring you The Ultimate Machining Power®. The GA series will help you be more competitive
by achieving faster c ycle times with heavier cuts, faster machine movements, and allow
cutting of tough material efficiently. You’ll also appreciate the reliabilit y and durabilit y
that our machines are k nown for. Plus, with more standard features than any other
machine on the market today, many say it ’s the best investment they have ever made.
Extremely powerful high-torque spindles deliver 2.5 ~ 4 times the torque output of standard spindles.
Extra large Z-axis servo motors provide the thrust needed to efficiently drill big diameter holes.
In order to endure the machine’s high outputs with durability, heavy-duty roller bearings are used to support the
spindles and the axes guide ways are super rigid one-piece box ways.
There are a total of 36 models available in the GA Series lineup. Use the chart below to pinpoint the model that
best suits your application needs.
C: Compact Bed /900 & L : Long Bed M: Live Tooling & C-axis
*1 Turning length listed here are approximate numbers, individual models may vary. Please see Machine Specifications page for details.
Performance Dimensions Features Specifications
The modern 30° slant wedge bed design provides smooth chip disposal and easier operator access
without sacrificing machine rigidity.
Larger machining capacities and available live tooling features provide additional production flexibility.
1
2
GA Series machines ( excluding compact bed C models ) feature a standard programmable base and quill tailstock.
Machine rigidity is increased by eliminating the opening required for under-machine-type coolant tanks.
Heat escapes directly into the air, not trapped inside the
machine; this tremendously improves the machine’s overall
accuracy by lowering thermal expansion effects to a minimum.
Coolant tank Less space limitations allow larger 230 L ( 60 gal ) coolant tank
capacity and easier maintenance access.
GA Series Construction Spindle Turret Multi-Tasking
6 .6 ’
Central Conveyor
Machine Conveyor
Rear discharge conveyor systems
GA-2000C allow machines to be placed closer
together, thus, requiring less floor
space. Furthermore, all machine
conveyors can discharge onto a
central conveyor, which carries the
chips to one location; this saves man
power and streamlines the chip
removal process.
The standard chip conveyor features adjustable timers that allow the operator to
set operation intervals according to the amount of chips generated by the
machine. Thus , reducing coolant loss to a minimum.
Right — — —
GA-2000C
Rear S O O
GA-2000 Right S O O
GA-3000 Rear O O O
GA-2000L Right S O O
GA-3000/900
GA-3000L Rear — — —
Built to withstand years and years of rigorous high production turning ; the heavily ribbed, one-piece
thermally balanced bed and casting components are of " MEEHANITE " casting.
By using Finite Element Methods ( FEM ), highly reinforced ribbings are directly cast into the
one-piece bed structure. Mechanical rigidity has been increased by more than 30% when compared
to conventional designs.
All spindle and servo motors, including drives, are FANUC αi series components to ensure peak
machining performance and accuracy.
X and Z axes are driven by over-sized FANUC AC αi series absolute servo motors, providing
tremendous thrust outputs with faster acceleration and deceleration. Absolute encoder technology
eliminates the use of limit switches, thus, eliminating referencing axes to home positions and
broken limit switches.
Mechanical Design
Utilizing the latest 3D CAD design software to assist in machine development, and FEM ( Finite Element Methods )
to provide engineering analysis, we are able to create the best designs possible.
Performance Dimensions Features Specifications
GA series head stocks feature even thickness sides, which evenly distribute cutting forces to the machine bed, 5
resulting in exceptional vibration dampening characteristics and forms a stronger structure to handle 6
interrupted and heavy cutting applications. Heat dispensing fins around the headstock evenly dispense heat to
reduce deformation, therefore, increasing machining accuracy. 7.5" 7.5"
ir
olA Co
Co olA
ir
19"
Slide ways are bonded w i t h
" Turcite B " to eliminate stick-slip,
minimize wear, and maintain long
term accuracy. Rapids are 20
m/min ( 788 IPM ) on X-axis & 24
m/min ( 945 IPM ) on Z-axis.
Extra wide, hardened and precision ground box ways are widely space, and directly cast onto the machine
bed and saddle for maximum strength and precision. The box way design also provides the rigidity needed
for heavy-duty and interrupted turning applications.
GA Series Construction Spindle Turret Multi-Tasking
143 170
140 12 160 12 200 12
10 HP ( cont. ) 10 HP ( cont. ) 196 10 HP ( cont. )
Torque ( 15 min. )
70 6 80 6 100 6
Torque ( cont. )
Torque ( cont. ) Torque ( cont. )
0 400 500 1000 1200 rpm 0 200 290 400 600 870 rpm
0 250 335 500 750 1005 rpm
Constant Torque Constant Output Constant Torque Constant Output Constant Torque Constant Output
( OPTIONAL )
Performance Dimensions Features Specifications
2236
0 403 1000 2000 2415 3000 rpm 0 403 1000 2000 2415 3000 rpm 0 373 1000 2000 2500 rpm
Constant Torque Constant Output Constant Torque Constant Output Constant Torque Constant Output
353
327 327
300 20 300 20 300 20
17 HP ( cont. ) 17 HP ( cont. ) 17 HP ( cont. )
0 280 350 700 rpm 0 280 350 700 rpm 0 260 324 648 rpm
Constant Torque Constant Output Constant Torque Constant Output Constant Torque Constant Output
Low Gear
High Gear
Torque ( cont. )
50 10 50 10 50 10
Torque ( cont. ) Torque ( cont. )
Concave Convex
Curvic Coupling
Clamp Block
Max. Swing Dia. Ø 21.65
CV-3045
CV-3046 9.45
O.D. Tools O.D. Tool Holder
□1 7.87 1.57 X-axis stroke : 8.07
CV-3096D
□1 2.3 0.39 6.50 1.18
5
Ø8.43
Clamp Block Face Tool Holder
.98
CV-3093 CZ-31A7 Ø8 1.57 2
Face Tools □1 -1/
0.7
□1 9 3 4 5 Ø1
1.27
12 1 2
6 7 8
9 10 11
I.D. Tools 0
Ø1
Ø 8.28
Sleeve
I.D. Tools CV-3097
I.D. Tool Holder
ia.
(Coolant Through) 7.8 8 n gD
Sleeve
7 3.7 rni
CZ-31A8 0.3
9 Ø 1 ax. tu
Drill 1.5 M spindle center line
7
7
X-a 6.5
0.7
x 0
is s
tro
ke:
Sleeve 8.0 1.1
7 8
I.D. Tools (MT type)
Coolant Block
(Coolant Through)
CZ-3108
Unit : inch
Performance Dimensions Features Specifications
Work Range
GA-2000C : 4.92
GA-2000 : 5.51 GA-2000C : 13.77
Z-axis Stroke GA-2000 : 25.59
GA-2000L : 5.51 GA-2000L : 48.42 9
GA-2000C : 0.78
GA-2000C : 12.99 GA-2000 : 1.18 10
GA-2000 : 24.40 GA-2000L : 1.18
GA-2000L : 47.24
12 / 10
Stations Turret
Cover
Max. : 4.72
0.39
1.57
X-axis Stroke : 8.07
10" Chuck
6.49
8" Chuck
1.18
Quill Stroke
4.96 5.90 ( 4.06 )
5.53
Tailstock Base Stroke
GA-2000C : 19.05 GA-2000 : 21.65
GA-2000 : 14.13 GA-2000L : 44.88
GA-2000L : 14.13
Clamp Block
CV-3045
CV-3046 9.45 8.07
O.D. Tools O.D. Tool Holder axis Stroke :
□1 7.87 1.57 X- 1.18
CV-3096D 6.5"
0.39
□1 2.3
5
Ø1
1
.02
Ø10.47
Clamp Block Face Tool Holder
CV-3093 CZ-31A7 /2
Face Tools -1
□1 1.5 Ø1
□1 7
0.7
3 4
1.27 8
10 1 2
5 6 7
8 9
10
I.D. Tools
1.65 Ø
Ø2
Sleeve
Ø8
.28
7 6.5
X-a
xis
Str
oke
Sleeve : 8. 1.1
07
8
I.D. Tools (MT type)
Coolant Block
(Coolant Through)
CZ-3108
Unit : inch
GA Series Construction Spindle Turret Multi-Tasking
Concave Convex
Curvic Coupling
Clamp Gib
Max. Swing Dia.
CV-3046
Ø 24.41
Clamp Block
CV-3045 Ø 1-1/2
□1
□1
O.D. Tools 2.8
O.D. Tool Holder 7 2.17 X-axis stroke : 10.24
CS-34B8
0.79 8.46 0.98
Clamp Block □1
CV-3093 Face Tool Holder 4 5 6
□1 CS-34A7
1 2 3
7 8 9
2.41
Face Tools
10 11 12
6
Ø8.8
I.D. Tools Ø9.17
CS-34A8
0.7
Drill 8.4 9
(MT type) 6
Sleeve 1.5
7
X-a 9.0
xis 6
Coolant Block str
ok
I.D. Tools Sleeve e:
CS-3430 10
15"
.24 0.3
12" c
(Coolant Through) 9
10" chu
chu
huck
ck
ck
Unit : inch
Performance Dimensions Features Specifications
Work Range
GA-3000 : 24.80
Z-axis Stroke GA-3000/900 : 36.61
GA-3000L : 48.42 11
6.29 GA-3000 : 23.62 1.18
12
GA-3000/900 : 36.61
GA-3000L : 47.24
12 / 10
Stations Turret
Cover
0.79
1.57
15" Chuck
X-axis Stroke
10.24
9.05
12" Chuck
MT#4
0.39 Built-in
5.70
Clamp Gib
Max. Swing Dia. Ø 24.41
CV-3046
Clamp Block : 10.24
CV-3045 2.17 X-axis Stroke
□1
□1
O.D. Tools
2.8 0.98
O.D. Tool Holder 7 8.46
CS-34B8 0.79
Ø1-1/2
Clamp Block □1
CV-3093 Face Tool Holder 4 5
CS-34A7
1 2 3
□1
6 7 8
2.41
Face Tools
9 10
Ø1
1.3
0
CS-34A8
1.9
8.4 0.7
6 9
Drill (MT type)
Sleeve 1.5
7
X-a 9.0
xis 6
Coolant Block Str
oke
I.D. Tools Sleeve CS-3430 : 10
.24 0.3
15" C
(Coolant Through)
12" Chuck
10" Chuck
9
huck
Unit : inch
GA Series Construction Spindle Turret Multi-Tasking
Working with the live tooling turret, the Cf-axis and disk
brake system enables the machine to perform drilling,
tapping, and milling operations, including c y l i n d r i c a l
a n d p o l a r c o o r d i n a t e i n t e r p o l a t i o n s ( resembling a
4 th -axis rotary table on a machining center ).
13
14
GA-2000 Series & GA-3000 Series
Live Tooling Turret Output
Torque Output
( lb-ft ) α22/4000is Servo Motor ( HP )
20 8
16
15 6
10 4
5 2
Machining Capability
Sample Work-pieces
0.39
X-axis Stroke : 8.07
10" Chuck
1.57
6.30
8" Chuck
1.38
Quill Stroke
4.96 5.90 4.06
5.53
Tailstock Base Stroke
14.13 GA-2000M : 20.07
GA-2000LM : 43.30
Clamp Block
O.D. Tools CV-3045 Coolant Block
□1 Clamp Gib CR-3077
CV-3046
Ø 10.08 7.8 X-axis Stroke : 8.07
Ø
Ø2
2.36 1.57
CR-3115
0
□1 1.57
Opt.
M
Clamp Block 1.9 ax.
Face Tool Holder 7
CV-3093 CR-3112
Face Tools □1 Opt.
□1 0.12
2
1/
2
1-
3
Ø9
1
10" Chuck
Sleeve Ø7.09
11
5
8" Chuck
CJ-3110C
10
6
CJ-3110B 7 9
I.D. Tools 8
CJ-3110A
CJ-3112B
CJ-3112A
CV-3097
2
CJ-3112C
2.1
a.
CJ-3112E I.D. Tool Holder Max. turning Di
CJ-3112D (Coolant Through) Ø 13.39
CR-3109
1.5
9
Sleeve 7
0.7
0.39
15" Chuck
1.57
8.85
12" Chuck
MT#4
0.98 Built-in
2.16
Ø7
2.36 1.57
5 6
I.D. Tools 9
Ø7.0
11 1
Sleeve 12"Chuck
4
1 2 3
2
CJ-3110C
I.D. Tools CJ-3110B 15"Chuck
CJ-3110A
CJ-3112B
9
2.0
CJ-3112A
CJ-3112C CV-3097 ing Dia.
CJ-3112E I.D. Tool Holder Max. Turn
CJ-3112D (Coolant Through) Ø18.50
7
1.9
Sleeve CR-3109
(MT type) 7.8 0.3
Drill CJ-3106 (MT#1) 7 9
CJ-3107 (MT#2)
CJ-3113 (MT#3)
1.5 X-a
7 8.8
xis 9
Sleeve Str
ok
e : 10
CV-3204B .24
I.D. Tools CV-3204A 0.9
(Coolant Through) 8
O.D. Tools
□1 Cut-off Tool Holder
CR-3105
□1 Unit : inch
GA Series Construction Spindle Turret Multi-Tasking
O.D. drill & mill holder Face drill & mill holder
( ER 32 collet ) ( ER 32 collet )
High speed O.D. drill & High speed face drill &
mill holder mill holder
( ER 20 collet, Max. 8,000 rpm, ( ER 20 collet, Max. 8,000 rpm,
ratio i =1 : 2 ) ratio i =1 : 2 )
Machining time is reduced by over 50%. Hydraulical movement with adjustable block.
No unwanted turning marks. Setups are easy with the integration of both
hydraulic and spring activation.
Excellent surface quality by using a viper geometry
ground insert.
MACHINING PERFORMANCE
17
18
GA-2600 Spindle Acc. / Dec. Times GA-3000 Spindle Acc. / Dec. Times
Chuck : 10" + Hard Jaws Chuck : 12" + Hard Jaws
4000 3000
Spindle Speed ( RPM )
3500 2500
Spindle Speed ( RPM )
3000
2000
2500
2000 1500
1500 1000
1000
500
500
0 0
1 2 3 4 5 6 Time (sec.) 1 2 3 4 5 6 Time (sec.)
RPM 500 1000 1500 2000 2500 3000 3500 4000 RPM 500 1000 1500 2000 2500 3000
Acc. 0.7 1.3 1.7 2.3 3.0 3.6 5.0 6.4 Acc. 0.9 1.7 2.4 3.0 4.2 6.4
Dec. 0.5 0.8 1.3 1.8 2.5 3.1 4.0 4.8 Dec. 0.9 1.8 2.6 3.2 4.0 5.1
Unit: Sec. Unit: Sec.
96 mm 82 mm 0.32 mm 7 mm / side
2 ( 3.77" ) ( 3.22" ) 550 RPM ( 0.0125" ) ( 0.2755" / side ) 112%
GA-3000
OD Before OD After Spindle F / Rev. Depth of Spindle
Cut Cut Speed Cut Load
144 mm 120 mm 0.40 mm 12 mm / side
( 5.67" ) ( 4.72" ) 729 RPM ( 0.016" ) ( 0.4724" / side ) 65%
GA Series Construction Spindle Turret Multi-Tasking
GENER AL DIMENSION
Space Requirement GA-2000C Floor Space
( Direction of Dismantle )
( Direction of Assembly )
GA-2000 series GA-3000 series
89"
GA-2000C series
39"
R3 3"
1.
Chip Conveyor
39"
GA-2000 : 64.2"
GA-3000 : 71.3"
( Direction
of Dismantle )
Model A B C
500 mm 1,812 mm 2,250 mm
GA-2000C
As Required
A H
F L
GA-2000C series
E K
B C I
D J
Model A B C D E F G H I J K L
1,995 1,793 1,725 1,630 730 1,055 843 1,232
GA-2000C ( 78.6" ) ( 70.6" ) — — — — ( 67.9" ) ( 64.2" ) ( 28.7" ) ( 41.5" ) ( 33.2" ) ( 48.5" )
2,445 2,142 945 1,245 685 1,205 1,890 1,630 875 765 705 1,206
GA-2000 ( 96.3" ) ( 84.3" ) ( 37.2" ) ( 49.0" ) ( 27.0" ) ( 47.4" ) ( 74.4" ) ( 64.2" ) ( 34.5" ) ( 30.1" ) ( 27.8" ) ( 47.5" )
3,345 3,242 870 1,145 745 1,221 1,845 1,630
GA-2000L ( 131.7" ) ( 127.6" ) ( 34.3" ) ( 45.1" ) ( 29.3" ) ( 48.1" ) ( 72.7" ) ( 64.2" ) — — — —
2,845 2,740 955 1,280 680 1,243 1,910 1,965 825 680
GA-3000 ( 112.0" ) ( 107.9" ) ( 37.6" ) ( 50.4" ) ( 26.8" ) ( 48.9" ) ( 75.2" ) ( 77.4" ) ( 32.5" ) — ( 26.8" ) —
3,165 3,060 955 1,280 690 1,243 1,910 1,980
GA-3000/900 ( 124.6" ) ( 120.5" ) ( 37.6" ) ( 50.4" ) ( 27.2" ) ( 48.9" ) ( 75.2" ) ( 78.0" ) — — — —
3,495 3,390 930 1,258 656 1,209 1,910 2,020
GA-3000L ( 137.6" ) ( 133.5" ) ( 36.6" ) ( 49.5" ) ( 25.8" ) ( 47.6" ) ( 75.2" ) ( 79.5" ) — — — —
FEATURES
19
【 Standard Features 】 20
Tool Setter
The optional Renishaw HPMA tool presetter utilizes a
motorized arm to lower the tool probe into position. An
auto tool check function further increases tool touch off
efficiency.
Load Monitoring
The load monitoring function is used to detect abnormal load
of tools by monitoring the variation in spindle motor and servo
motor loads during the cutting process. When abnormal loads
are detected, the machine will stop at program end ( M30 ) or
immediately ( feed hold status ) according to tool life value or
tool break value respectively.
【Optional Features】
GA
GA
GA
GA
GA
GA
-3
-3
-3
-2
-2
-2
00
30
60
00
60
80
3-Jaw Chuck SPINDLE
0
0
0
w/ Soft Jaws x 1 set ( Std. ) Main spindle motor configuration
Single-speed S – – – – –
Two-speed O S S S S S
Rigid tapping & spindle orientation S S S S S S
Spindle disk brake O O O O O O
Cf-axis & spindle disk brake*¹ O O O O O O
Sub-spindle – – – – – –
WORK HOLDING
6" Big-Bore O – – – – –
8" S – – – – –
8" Big-Bore – O – – – –
Hydraulic hollow 3-jaw chuck 10" – S – – – –
10" Big-Bore – – S S – –
12" – – – – S –
15" – – – – – S
External Work Light ( Std. ) Hard jaws 1 set O O O O O O
Soft jaws 1 set S S S S S S
Collet chuck O O O O O O
Special work holding chuck C C C C C C
In spindle work stopper O O O O O O
Spindle liner ( guide bushing ) O O O O O O
Single S S S S S S
Foot switch for chuck operation
Double O O O O O O
Programmable base & quill hydraulic tailstock S S S S S S
MT#4 live center O O O – – –
MT#5 live center – – – O O O
Single O O O O O O
Foot switch for tailstock operation
Double O O O O O O
Self-centering hydraulic steady rest O O O O O O
Tri-color Status Light ( Std. )
Single O O O O O O
Foot switch for steady rest operation
Double O O O O O O
Chuck clamping O O O O O O
Two-stage programmable pressure
Tailstock thrust O O O O O O
TURRET
10-station turret O O O O O O
12-station turret S S S S S S
12-station turret w/ no-lifting tooling disk O O O O O O
12-station live tooling turret w/ no-lift tooling disk*¹ O O O O O O
Tool holder & sleeve package S S S S S S
Live tooling tool holders ( 0° × 2 + 90° × 2 )*¹ O O O O O O
MEASUREMENT
Renishaw HPMA tool presetter Motorized arm S S S S S –
Lubrication Unit ( Std. ) Renishaw HPRA tool presetter O O O O O S
COOLANT
3 Kg/cm² ( 42 PSI ) S S S S S S
Coolant pump 5 Kg/cm² ( 71 PSI ) O O O O O O
7 Kg/cm² ( 100 PSI ) O O O O O O
High-pressure coolant system 20 Kg/cm² ( 284 PSI ) O O O O O O
Roll-out coolant tank S S S S S S
Oil skimmer S S S S S S
Coolant flow switch O O O O O O
Coolant level switch O O O O O O
Coolant intercooler system O O O O O O
CHIP DISPOSAL
Right discharge S S S S S S
Chip conveyor with auto timer
Rear discharge*² O O O O O O
Oil Skimmer ( Std. ) Chip cart with coolant drain O O O O O O
Chuck air blow O O O O O O
Tailstock air blow O O O O O O
Coolant gun O O O O O O
Oil mist collector O O O O O O
AUTOMATIC OPERATION SUPPORT
Parts catcher O O O O O O
Work-piece transport conveyor O O O O O O
Bar feeder O O O O O O
Bar feeder interface O O O O O O
Gantry-type loader / unloader O O O O O O
Auto door O O O O O O
4 sets (8) O O O O O O
Extra M-code output
8 sets (16) O O O O O O
*1 Standard on M models. *2 GA-2000 series C models & GA-3000 series models only.
Performance Dimensions Features Specifications
S: Standard O: Option 21
–: Not Available C: Contact YAMA SEIKI 22
GA
GA
GA
GA
GA
GA
-2
-2
-2
-3
-3
-3
SAFETY 4-Jaw Chuck ( Opt. )
00
60
80
00
30
60
0
0
Fully enclosed guarding S S S S S S
Door interlock ( incl. Mechanical lock ) S S S S S S
Impact resistant viewing window S S S S S S
Proximity switch for tailstock quill position confirmation S S S S S S
Proximity switches for chuck clamp / unclamp confirmation S S S S S S
Chuck cylinder check valve S S S S S S
Low hydraulic pressure detection switch S S S S S S
Over travel ( soft limit ) S S S S S S
Load monitoring function O O O O O O
OTHERS
Tri-color operation status light tower S S S S S S
Florescent work light S S S S S S
Heat exchanger S S S S S S Air Chuck ( Opt. )
Electrical cabinet
A/C cooling system O O O O O O
Complete hydraulic system S S S S S S
Hydraulic oil intercooler system S S S S S S
Advanced auto lubrication system S S S S S S
Foundation leveling & maintenance tool kit S S S S S S
Emergency maintenance electrical part package S S S S S S
Operation & maintenance manuals S S S S S S
Oi
31
-T
MACHINE SPECIFICATIONS
23
24
CAPACITY GA-3000 GA-3300 GA-3600
Max. swing diameter Ø 600 mm ( 23.62" )
Swing over saddle Ø 500 mm ( 19.69" )
Max. turning diameter Ø 500 mm ( 19.69" )
Std. turning diameter Ø 225 mm ( 8.86" )
629 mm || 929 mm || 1,229 mm 624 mm || 924 mm || 1,224 mm 596 mm || 896mm || 1,196 mm
Max. turning length*4
( 24.76" || 36.57" || 48.39" ) ( 24.55" || 36.37" || 48.18" ) ( 23.46" || 35.27" || 47.08" )
Max. work-piece weight *2 340 Kg ( 748 lb ) 340 Kg ( 748 lb ) 340 Kg ( 748 lb )
Chuck size Ø 10" ( 12" ) Ø 12" ( 15" ) Ø 15"
Bar capacity Ø 75 mm ( 2.95" ) Ø 90 mm ( 3.54" ) Ø 105 mm ( 4.13" )
SPINDLE
Hole through draw tube Ø 75.5 mm ( 2.97" ) Ø 90.5 mm ( 3.56" ) Ø 105.5 mm ( 4.15" )
Hole through spindle Ø 90 mm ( 3.54" ) Ø 101 mm ( 3.98" ) Ø 121 mm ( 4.76" )
Spindle bearing diameter Ø 130 mm ( 5.12" ) Ø 140 mm ( 5.51" ) Ø 160 mm ( 6.30" )
Hydraulic cylinder 10" 12" 15"
Spindle nose A2-8 A2-8 A2-11
Spindle motor type FANUC αP40 / 6000i ( AC / Wide-Range )
Motor output ( Cont. ) 18.5 kW ( 25 HP )
Motor output ( 30 min. ) 22 kW ( 30 HP )
Motor full output speed 400 / 575 RPM
Spindle drive system Direct Belt Drive
Spindle drive ratio 7 : 10 7 : 10 35 : 54
Spindle speed range 30 ~ 3,000 RPM 30 ~ 3,000 RPM 25 ~ 2,500 RPM
Spindle full output speed 403 RPM 403 RPM 373 RPM
Spindle torque ( 30 min. ) 522 N-m ( 385 lb-ft ) 522 N-m ( 385 lb-ft ) 563 N-m ( 415 lb-ft )
Spindle torque ( Cont. ) 439 N-m ( 324 lb-ft ) 439 N-m ( 324 lb-ft ) 473 N-m ( 349 lb-ft )
2-SPEED SPINDLE
L 30 ~ 700 RPM 30 ~ 700 RPM 25 ~ 648 RPM
Spindle speed ranges
H 701 ~ 3,000 RPM 701 ~ 3,000 RPM 649 ~ 2,500 RPM
L 280 RPM 280 RPM 260 RPM
Spindle full output speed
H 403 RPM 403 RPM 373 RPM
Spindle torque ( 15 min. ) L 750 N-m ( 553 lb-ft ) 750 N-m ( 553 lb-ft ) 810 N-m ( 597lb-ft )
Spindle torque ( 30 min. ) H 439 N-m ( 324 lb-ft ) 439 N-m ( 324 lb-ft ) 473 N-m ( 349 lb-ft )
Cf-AXIS SPINDLE ( OPTIONAL )
Drive type AC Servo Motor 1 kW ( 1.3 HP )
Torque output / max. speed 480 N-m ( 354 lb-ft ) / 33 RPM
X & Z AXES
Max. X-axis travel*³ 260 mm ( 10.23" )
Max. Z-axis travel*4 630 mm ( 24.80" ) || 930 mm ( 36.61" ) || 1,230 mm ( 48.42" )
X / Z axes rapid 20 m/min ( 788 IPM ) / 24 m/min ( 945 lPM )
Slide way type Hardened & Ground Box Ways
Feed rates 1 ~ 4,800 mm/min ( 1 ~ 189 IPM )
X-axis servo motor AC 2.7 kW ( 4 HP )
Z-axis servo motor AC 4.5 kW ( 6 HP )
X-axis ball screw Ø / pitch Ø 36 mm ( 1.41" ) / Pitch 8
Z-axis ball screw Ø / pitch Ø 45 mm ( 1.77" ) / Pitch 10
X / Z axes thrust ( Cont. ) 962 Kg ( 2,116 lb ) / 1,411 Kg ( 3,104 lb )
Specifications are subject to change without notice.
*4 GA-3000 || GA-3000/900 || GA-3000L
GA Series Construction Spindle Turret Multi-Tasking
MACHINE SPECIFICATIONS
Machine : 2,014 x 1,812 x 1,725 || 2,445 x 1,630 x 1890 || 3,345 x 1,630 x 1,890 mm
Dimensions L × W × H*²
( 79.3" x 71.4" x 67.9" || 96.3" x 64.2" x 74.4" || 131.7" x 64.2" x 74.4" )
25
26
TURRET GA-3000 GA-3300 GA-3600
Stations 12 Std. / 10 Opt.
Indexing drive AC Servo motor
Indexing speed 0.2 sec. Adjacent / 0.5 sec. 180 degree ( Single step )
Accuracy Positioning: +/- 0.00069°, Repeatability: +/- 0.00027°
OD tool shank size □ 1"
ID tool shank size Ø 1-1/2" ( Opt. Ø 2" )
LIVE TOOLING TURRET ( OPTIONAL )
Stations 12
Live tooling stations 12
Live tooling drive type 4.5 kW ( 6 HP ) , 21.9 N-m (16.2 lb-ft ) ( Intermittent ) AC Servo motor
Indexing drive type AC Servo motor
Index speed 0.2 sec. Adjacent / 0.5 sec. 180 degree ( Single step )
OD tool shank size □ 1"
ID tool shank size Ø 1-1/2" ( Opt. Ø 2" )
Live tooling shank size ER 32 collets
Live tooling RPM range 4,000 RPM
TAILSTOCK
Quill center taper MT#5 ( Live center ) [ Opt. MT#4 ( Dead center ) ]
Quill diameter / travel Ø 110 mm ( 4.33" ) / 150 mm ( 5.90" )
Tail stock base travel*¹ 450 mm ( 17.71" ) || 750 mm ( 29.52" ) || 1,050 mm ( 41.33" )
Programmable quill / base Yes / Yes
Programmable base type Positioned by Z-axis carriage
PARTS CATCHER ( OPTIONAL )
Maximum part diameter Ø 105 mm ( 4.13" )
Maximum part length 180 mm ( 7.08" )
GENERAL
Positioning accuracy ± 0.01 mm ( 0.0004" )
Repeatability ± 0.003 mm ( 0.0001" )
Standard CNC control FANUC Oi -TD
Voltage / Power requirement AC 200 / 220 +10% to -15% 3 phase / 38 kVA
Hydraulic tank capacity 40 L ( 10 gal )
Coolant tank capacity 230 L ( 60 gal )
Coolant pump 3/4 HP rated at 65 PSI
Machine weight*³ 5,800 Kg ( 12,760 lb ) || 6,500 Kg ( 14,330 lb ) || 7,000 Kg ( 15,400 lb )
Machine : 2,845 x 1,965 x 1,910 || 3,165 x 1,980 x 1,910 || 3,495 x 2,020 x 1,910 mm
Dimensions L × W × H*²
( 112.0" x 77.4" x 75.2" || 124.6" x 78.0" x 75.2" || 137.5" x 79.5" x 75.2" )