Professional Documents
Culture Documents
MCGB - DATA SHEET FOR SUPPLIERS Old MAT Nos.: Weldox 700 E, -, -
PROPERTIES:
Thermomechanically processed structural steel with Rm > 700 MPa.
The steel has better weldability, toughness, ductility and bendability than normalised steels of corresponding
strength.
Impact energy at -40 °C > 30 J.
STANDARDS:
General requirements:
When reference to this MAT NO appears on FLS Drawing or FLS Parts List or in FLS Purchace Order the data from the
Primary Standard is used as acceptance criteria.
Specific deviations in requirements made in the FLS Parts List, the FLS Purchace Order or a FLS Instruction always
overrules this data sheet.
Alternatively accepted International Standards listed in this sheet may be used if the suppliers documentation covers at
least the documentation required in the Primary Listed Standard. This means that supplementary tests in some cases
will be necessary.
Primary Standard:
EN 10137-2 (1995) , MATERIAL: S690QL , MATERIAL No.: 1.8928
Plates and wide flats of high yield strength structural steels in the quenched and tempered or precipitation
hardened conditions-Part 1: Delivery conditions for quenched and tempered steels.
CHEMICAL COMPOSITION:
Dim, mm % C max % Si max % Mn max or % P max % S max % N max % Al min
or range or range range or range or range or range or range
0.20 0.80 1.70 0.020 0.010 0.015 0.015
% Nb+% V+ % Zr + % Al > 0.015 %
Dim, mm % Cr max % Mo max % Ni max % V max % Nb max % Ti max % Cu max % Other max
or range or range or range or range or range or range or range or range
1.50 0.70 2.0 0.12 0.06 0.05 0.50 -
% B < 0.0050; % Zr < 0.15
MCGB - DATA SHEET FOR SUPPLIERS Old MAT Nos.: Weldox 700 E, -, -
DELIVERY CONDITIONS:
The steel shall be supplied in the thermomechanically processed condition or in the quenched and
tempered condition.
MCGB - DATA SHEET FOR SUPPLIERS Old MAT Nos.: Weldox 700 E, -, -
Revisions:
Rev. No Rev. Date Change Responsible
0,6 31-01-2002 Text editions AnJo
Prepared & Approved changed
References to Alternative Standards added to supplier version