Professional Documents
Culture Documents
PROPERTIES:
Wear resistant steel.
STANDARDS:
General requirements:
When reference to this MAT NO appears on FLS Drawing or FLS Parts List or in FLS Purchase Order the
data from the Primary Standard is used as acceptance criteria.
Specific deviations in requirements made in the FLS Parts List, the FLS Purchase Order or a FLS Instruction
always overrules this data sheet.
Alternatively accepted International Standards listed in this sheet may be used if the suppliers
documentation covers at least the documentation required in the Primary Listed Standard. This means that
supplementary tests in some cases will be necessary.
Primary Standard:
EN 10213-2, MATERIAL: GS-17 CrMo 5 5, MATERIAL No.: 1.7357
Technical delivery conditions for steel castings for pressure purposes. Part 2: Steel grades for use at
room temperature and elevated temperature.
CHEMICAL COMPOSITION:
% C max or % Si max or % Mn max or % P max or % S max or % N max or % Al min or
Dim. mm
range range range range range range range
0.15-0.2 0.6 0.5-1.0 0.02 0.02 - -
DELIVERY CONDITIONS:
To be delivered in the tempered condition.
Revisions:
Rev. No. Rev. Date Change Responsible
0,60 10-02-2002 Prepared & Approved changed. References to Alternative Standards added to AnJo
supplier version
0,70 15-01-2004 Standard ASTM A 217 M and EN 10213-2 updated. Rev_no updated: An AsK
extra decimal place is added.
0,71 31-01-2005 Standards updated. AsK
1,0 08-06-2005 Rev. no. changed to 1,0 AsK