Professional Documents
Culture Documents
PROPERTIES:
Unalloyed Steel casting suitable for assembly with other steel castings or wrought steel parts by fusion
welding.
STANDARDS:
General requirements:
When reference to this MAT NO appears on FLS Drawing or FLS Parts List or in FLS Purchase Order the
data from the Primary Standard is used as acceptance criteria.
Specific deviations in requirements made in the FLS Parts List, the FLS Purchase Order or a FLS Instruction
always overrules this data sheet.
Alternatively accepted International Standards listed in this sheet may be used if the supplier’s documentation
covers at least the documentation required in the Primary Listed Standard. This means that supplementary
tests in some cases will be necessary.
Primary Standard:
ASTM A 27/A 27M (2013), MATERIAL: Gr. 65-35 [450-240]
Standard Specification for Steel Castings, Carbon, for General Application
CHEMICAL COMPOSITION:
% C max or % Si max or % Mn max or % P max or % S max or % N max or % Al min or
Dim. mm
range range range range range range range
0.3 0.8 0.7 0.035 0.035 - -
DELIVERY CONDITIONS:
To be delivered in the normalised condition. The heat treatment shall be carried out at suitable temperatures
to conform the mechanical properties specified.
Revisions:
Rev. No. Rev. Date Change Responsible
0,70 10-02-2002 Text editions AnJo
Prepared & Approved changed
References to Alternative Standards added to supplier version.
0,80 12-03-2003 Welding electrode number changed by adding 9000. Welding electrodes are AsK
transferred to Purchase Parts.
0,90 15-01-2004 Standards updated. Rev_no updated: An extra decimal place is added. AsK
0,91 31-01-2005 DIN 1681 replaced by prEN 10293:2003 material designation GE 240 AsK
0,92 01-04-2005 Chemical composition corrected AsK
1,0 08-06-2005 Rev. no. changed to 1,0 AsK
2,0 10-06-2009 Primary standard updated KHN
3.0 22-11-2012 Footer added AsK
4,0 12-06-2014 Primary standard updated. Chemical composition updated in accordance with BKL
primary standard. Alternative standard updated.