Professional Documents
Culture Documents
WARNING ADVERTENCIA
Read Instruction Manual thoroughly before use and Antes de usar la máquina lea y siga todas las precauciones
follow all safety precautions – improper use can cause de seguridad dadas en el manual de instrucciones – el uso
serious or fatal injury. incorrecto puede causar lesiones graves o mortales.
Instruction Manual
1 - 14
Manual de instrucciones
15 - 29
English
Contents
1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 14 DISPOSAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
14.1 Disposal of the Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2 GUIDE TO USING THIS MANUAL. . . . . . . . . . . . . . . . . . . 2
2.1 Signal Words. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 15 LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.2 Symbols in Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 15.1 STIHL Incorporated Limited Warranty Policy . . . . . . . 13
Original Instruction Manual
7.2 Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
7.3 Mounting the Charger on a Wall . . . . . . . . . . . . . . . . . . . . . 8
8 LED DIAGNOSTICS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
8.1 LED on the Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
9 STORING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
9.1 Storing the Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
10 INSPECTION AND MAINTENANCE . . . . . . . . . . . . . . . . . 9
10.1 Inspecting and Maintaining the Charger . . . . . . . . . . . . . 9
11 TROUBLESHOOTING GUIDE. . . . . . . . . . . . . . . . . . . . . . 10
11.1 Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
© ANDREAS STIHL AG & Co. KG 2016
12 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
12.1 STIHL AL 101, AL 300, AL 500. . . . . . . . . . . . . . . . . . . . . 11
0458-511-8621-C. VA0.M16.
{ This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process
with electronic systems.
0458-511-8621-C 1
English 1 INTRODUCTION
1 INTRODUCTION WARNING
Indicates a hazardous situation that, if not avoided, could
result in death or serious injury.
Thank you for your purchase. The information contained in
this manual will help you receive maximum performance and
satisfaction from your STIHL charger and, if followed, NOTICE
reduce the risk of injury from its use. Indicates a risk of property damage, including damage to the
machine or its individual components.
SAVE THIS MANUAL!
Special safety precautions must be observed to
reduce the risk of personal injury. 2.2 Symbols in Text
The following symbol is included to assist you with the use
of the manual:
Read this instruction manual thoroughly before Refers to a designated chapter or sub-chapter in this
use and periodically thereafter. Follow all safety instruction manual.
precautions. Careless or improper use of the
charger can cause serious or fatal injury.
DANGER
Indicates a hazardous situation that, if not avoided, will
result in death or serious injury.
2 0458-511-8621-C
3 MAIN PARTS English
5 Plug
3 MAIN PARTS Connects the power supply cord to a wall outlet.
# Rating Plate
3.1 Charger Contains electrical information and the product's serial
number.
1
4 SAFETY SYMBOLS ON THE
3
4
PRODUCTS
4.1 Charger
5 The following safety symbols are found on the charger:
#
To reduce the risk of injury, follow the specified
safety precautions.
2
Read and follow all safety precautions in the
3 instruction manual. Improper use can lead to
4
serious or fatal personal injury or property
damage.
5
0000-GXX-0593-A0
1 Charger AL 101
Charges STIHL AK or STIHL AP series batteries.
2 Chargers AL 300 and AL 500
5 IMPORTANT SAFETY
Charges STIHL AK, STIHL AP or STIHL AR series INSTRUCTIONS
batteries.
3 Charger LED 5.1 Introduction
Indicates the operating status of the charger. This section contains the prescribed general safety
warnings and instructions for battery chargers. Additional
4 Power Supply Cord important warnings and instructions are provided in
Supplies the charger with electricity when plugged into a subsequent sections of this manual.
wall outlet.
READ ALL INSTRUCTIONS BEFORE USING THE
CHARGER!
0458-511-8621-C 3
English 5 IMPORTANT SAFETY INSTRUCTIONS
4 0458-511-8621-C
5 IMPORTANT SAFETY INSTRUCTIONS English
– Do not operate a charger that has received a sharp – Never jerk the power supply cord to disconnect it
or heavy blow, has been dropped or is otherwise from the wall outlet. To unplug, grasp the plug, not
damaged in any way. the power supply cord.
– Do not attempt to repair, open or disassemble the – Do not use the power supply cord for any other
charger. There are no user-serviceable parts inside. purpose, e.g., for carrying or hanging up the charger.
■ To reduce the risk of electric shock or fire from a short – Make sure the power supply cord is located or
circuit: marked so that it will not be stepped on, tripped over,
– Make sure the battery and charger are completely come in contact with sharp objects or moving parts,
dry before starting the charging process. or otherwise be subjected to damage or stress.
– Never bridge the contacts of the charger with wires ■ An extension cord should not be used unless absolutely
or other metallic objects. necessary. Overloading an extension cord can result in
overheating and fire. If an extension cord must be used:
– Do not insert any objects into the charger’s cooling
– Use only a properly wired 16 gauge (AWG 16) or
slots.
heavier gauge extension cord.
■ The charger heats up during the charging process. To
– Never connect more than one charger or other
reduce the risk of fire:
device to an extension cord.
– Do not operate on a combustible surface (e.g.,
paper, cardboard, textiles) or in a combustible – Never use an extension cord with a wattage rating
environment. lower than the wattage on your charger’s rating
plate.
– Allow the charger to cool down normally. Do not
cover it. – Never use an extension cord if the blades on its plug
are different from the blades on the charger plug in
■ Chargers can produce sparks which may ignite number, size or shape.
combustible gases, liquids, vapors, dusts or other
combustible materials. To reduce the risk of fire and – Do not link (chain) extension cords.
explosion: ■ A typical household electrical circuit is between 15 and
– Do not operate in a location where combustible 20 amps. A single STIHL AL 500 charger draws
gases, liquids, vapors, dusts or other combustible approximately 4.8 amps. A single AL 300 draws
materials are present. approximately 4.4 amps and an AL 101 approximately
1.3 amps. To reduce the risk of fire from overloading an
■ Using a damaged power supply cord or plug may result in
electrical circuit:
fire, electric shock and other personal injury or property
damage. To reduce these risks: – Ensure the electrical system is rated to withstand the
expected electrical draw before charging your
– Check the charger’s power supply cord battery.
and plug regularly for damage. If
damaged, immediately disconnect the – Charge multiple batteries one at a time or on
plug from the wall outlet. separate circuits, unless you know your circuit can
handle the total expected draw from multiple
– Have a damaged power supply cord replaced by an chargers.
authorized STIHL servicing dealer.
– Unplug the power supply cord from the outlet when
the charger is not in use.
0458-511-8621-C 5
English 6 MAINTENANCE, REPAIR AND STORAGE
■ In case of fire, or if the charger or the battery it is charging – Have a damaged power supply cord replaced by an
emits smoke, an unusual smell, feels hot or appears authorized STIHL servicing dealer.
abnormal in any other way:
■ Improper storage can result in unauthorized use, damage
– Immediately disconnect the charger from the outlet to the charger, and an increased risk of fire, electric shock
and prepare to contact the authorities in the event of and other personal injury or property damage.
fire or explosion.
– Never store the charger with the battery inserted.
■ To reduce the risk of electric shock and other personal
– Before storing, always unplug the charger from the
injury or property damage when mounting the charger:
wall outlet and remove the battery.
– Ensure that no electrical cables, pipes or other
service lines run behind the wall where the charger – Store the charger indoors in a dry, secure place out
is to be mounted. of the reach of children and other unauthorized
users.
– Mount the charger only as described in this manual.
– Remove the battery before mounting the charger.
SAVE THESE
INSTRUCTIONS
6 MAINTENANCE, REPAIR
AND STORAGE
7 CHARGING THE BATTERY
6.1 Warnings and Instructions
WARNING 7.1 Setting up the Charger
■ There are no user-authorized repairs for the charger. To
WARNING
reduce the risk of fire, electric shock or other personal
injury and property damage: Read and follow the safety precautions on the battery and
charger and the warnings and instructions in this manual,
– Do not attempt to repair, open or disassemble the
@ 5. Make sure the charger and its components are dry
charger. There are no user-serviceable parts inside.
and not damaged; operate the charger indoors at an
– Users may carry out only the cleaning and appropriate ambient temperature, @ 5.
maintenance operations described in this manual.
Users must not attempt any other cleaning, WARNING
maintenance or repair. Since the battery and charger heat up during the charging
■ To reduce the risk of electric shock: process, do not operate on a combustible surface or in a
location where combustible gases, liquids, vapors, dusts or
– Unplug the charger from the wall outlet before other materials are present, @ 5.
inspecting or cleaning the charger.
– Regularly check the electrical contacts of the
charger and ensure that the insulation of the power
cord and plug are in good condition and show no
signs of aging (brittleness), wear or damage.
6 0458-511-8621-C
7 CHARGING THE BATTERY English
1 3
5
2
4
0000-GXX-0637-A0
0000-GXX-0636-A0
2 4
2 3
1
► Insert the plug (4) into a properly installed wall outlet (5) ► Push the battery (2) into the charger (3) until it stops.
matching the voltage and electrical frequency stated on The LED on the charger glows green when the battery is
the charger's rating plate (1). being charged.
The charger runs a self-test immediately after it is plugged
The LEDs (1) on the battery glow green and show the
in. The LED (2) will glow green for about 1 second, then it
state of charge.
will glow red briefly before going out. Once the self-test is
complete, the charger is ready to charge the battery. When the LEDs on the battery go out, the charging
► Position the power supply cord (3) so that it will not be process is complete and the charger will shut itself off.
stepped on, tripped over, come in contact with sharp ► Remove the battery from the charger and disconnect the
objects or moving parts or otherwise be subjected to power supply cord from the wall outlet.
damage or stress. A factory-new battery is not fully charged. STIHL
recommends that you fully charge the battery before using it
for the first time.
7.2 Charging
The STIHL AL 300 and AL 500 chargers are equipped with
WARNING an integrated fan. The fan may switch on and off
Never charge a malfunctioning, damaged, cracked, leaking automatically while charging the battery.
or deformed battery or use a charger that has been Operate the charger only indoors, in dry rooms and within an
damaged, @ 5. Make sure the charger and the battery to be ambient temperature range of 41 °F to 104 °F (5 °C to
charged are both completely dry before charging, @ 5.3. 40 °C).
The battery heats up during operation. If a hot battery is
inserted into the charger, it may be necessary for it to cool
down before charging. The charging process begins only
after the battery has cooled down sufficiently.
Charging time depends on a number of factors, including
battery condition and the ambient temperature. For a
complete list of approximate charging times, see
www.stihl.com/charging-times.
0458-511-8621-C 7
English 8 LED DIAGNOSTICS
7.3 Mounting the Charger on a Wall If the LED glows green continuously: the battery
When mounting, ensure that no electrical cables, pipes or is being charged.
other service lines run in the wall behind the charger. or
To mount the wall charger: The battery is too hot or too cold for charging. To
determine, check the LEDs on the battery. If
1 2 3 there is one glowing red light, allow the battery to
warm up or cool down gradually at an ambient
temperature of about 50 °F to 68 °F (10 °C to
a 20 °C).
b
d
If the LED flashes red: there is no electric contact
e between the battery and the charger. Remove
0000-GXX-0609-A0
a e and reinsert the battery.
or
The battery has a malfunction and must be
► Mount the charger indoors in a dry room near a wall outlet. replaced. Check the LEDs on the battery. Do not
use or charge a battery if its LEDs indicate a
► Sink the screws into a wall stud. Use appropriate screw-in
malfunction.
wall anchors or other similar mounting devices if an
appropriate wall stud is not available. or
► Align the charger as shown above. Mount to a wall with the The charger has a malfunction. Have it checked
following dimensions: by an authorized STIHL servicing dealer before
– a = minimum 3.9 in. (100 mm) use.
– b (for AL 101) = 3.0 in. (75 mm) For more information, @ 11.
– b (for AL 300 and AL 500) = 4.7 in. (120 mm)
– c = 0.2 in. (4,5 mm)
– d = 0.4 in. (9 mm) 9 STORING
– e = 0.1 in. (2,5 mm)
9.1 Storing the Charger
8 LED DIAGNOSTICS WARNING
Store the charger indoors in a dry, secure place that is
inaccessible to children and other unauthorized users.
8.1 LED on the Charger Improper storage can result in unauthorized use and
One LED shows the status of the charger. The LED can glow damage to the charger that can lead to fire and explosion,
green or flash red. and otherwise increase the risk of severe personal injury
and property damage, @ 6. Never store the battery in the
charger, @ 6.
8 0458-511-8621-C
10 INSPECTION AND MAINTENANCE English
To properly store the charger: ► Have missing or damaged safety labels replaced by an
authorized STIHL servicing dealer.
► Remove the battery from the charger.
If you make a warranty claim for a component that has not
► Disconnect the charger from the wall outlet.
been serviced or maintained properly, coverage may be
1 2 denied.
0000-GXX-0592-A0
► Wrap the power supply cord and attach it to the charger.
► Store the charger indoors in a dry and secure location.
► Keep it out of the reach of children and other unauthorized
persons.
10INSPECTION AND
MAINTENANCE
10.1 Inspecting and Maintaining the Charger
WARNING
To reduce the risk of personal injury from short circuit and
fire, do not attempt to repair, open or disassemble the
charger. There are no user-serviceable parts inside. Always
unplug the charger before cleaning.
0458-511-8621-C 9
English 11 TROUBLESHOOTING GUIDE
11TROUBLESHOOTING GUIDE
11.1 Charger
Condition LEDs on Cause Remedy
Charger
LED on charger LED flashes No electrical contact ► Remove the battery and reinsert it into the charger.
flashes red. red. between charger and
battery.
Malfunction in ► Remove the battery and reinsert it into the charger.
battery. ► If the LED continues to flash, do not attempt to charge.
If 4 LEDs on the battery are flashing, it has a malfunction
and must be replaced. Otherwise, have the battery checked
by an authorized STIHL servicing dealer.
Malfunction in ► Have the charger checked by an authorized STIHL
charger. servicing dealer.
10 0458-511-8621-C
12 SPECIFICATIONS English
Symbol Explanation
12SPECIFICATIONS AC Alternating current
IP20 Degree of electrical protection
12.1 STIHL AL 101, AL 300, AL 500 X The power supply cord can be replaced by an
authorized STIHL servicing dealer.
– Mains voltage: See rating plate
Direct current
– Rated current: See rating plate
– Frequency: See rating plate Fuse
0458-511-8621-C 11
English 12 SPECIFICATIONS
12 0458-511-8621-C
13 REPLACEMENT PARTS AND EQUIPMENT English
0458-511-8621-C 13
English 17 ADDRESSES
STIHL
Injection TM
17ADDRESSES
17.1 STIHL Incorporated
STIHL Incorporated
536 Viking Drive
P.O. Box 2015
Virginia Beach, VA
23452-2015
14 0458-511-8621-C
español / EE.UU
Contenido
7 CARGA DE LA BATERÍA. . . . . . . . . . . . . . . . . . . . . . . . . . . 21
7.1 Preparación del cargador para el funcionamiento . . . 21
7.2 Carga . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
7.3 Montaje del cargador en pared . . . . . . . . . . . . . . . . . . . . . 22
8 DIAGNÓSTICO POR LED . . . . . . . . . . . . . . . . . . . . . . . . . . 23
8.1 LED en el cargador. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
9 ALMACENAMIENTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
9.1 Almacenamiento del cargador . . . . . . . . . . . . . . . . . . . . . . 23
10 INSPECCIÓN Y MANTENIMIENTO . . . . . . . . . . . . . . . . 24
10.1 Inspección y mantenimiento del cargador . . . . . . . . . . 24
© ANDREAS STIHL AG & Co. KG 2016
12 ESPECIFICACIONES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
0000007411_003_EA
{ Este manual de instrucciones está protegido por derechos de propiedad intelectual. Todos los derechos reservados, especial-
mente los derechos de reproducción, traducción y procesamiento con sistemas electrónicos.
0458-511-8621-C 15
español / EE.UU 1 INTRODUCCIÓN
1 INTRODUCCIÓN PELIGRO
Identifica una situación de peligro que, de no evitarse,
causará lesiones graves o mortales.
Gracias por su compra. La información que contiene este
manual lo ayudará a obtener el máximo rendimiento y
ADVERTENCIA
satisfacción del cargador STIHL, y a reducir el riesgo de
lesiones que supone su uso, si dicha información se Identifica una situación de peligro que, de no evitarse,
respeta. podría causar lesiones graves o mortales.
16 0458-511-8621-C
3 PIEZAS PRINCIPALES español / EE.UU
5 Enchufe
3 PIEZAS PRINCIPALES Conecta el cordón eléctrico al tomacorriente de pared.
1
4 SÍMBOLOS DE SEGURIDAD
3
4
EN EL PRODUCTO
4.1 Cargador
5 Los siguientes símbolos de seguridad están presentes en el
# cargador:
Para reducir el riesgo de lesiones, respete las
medidas de seguridad especificadas.
2
0458-511-8621-C 17
español / EE.UU 5 INSTRUCCIONES IMPORTANTES DE SEGURIDAD
18 0458-511-8621-C
5 INSTRUCCIONES IMPORTANTES DE SEGURIDAD español / EE.UU
– Nunca use el cargador si está roto. ■ El cargador se calienta durante el proceso de carga. Para
reducir el riesgo de incendios:
– Nunca cargue baterías defectuosas, dañadas,
agrietadas, deformadas o que pierdan líquido. – No haga funcionar el cargador sobre superficies que
puedan incendiarse (por ejemplo, papel, cartón o
– Nunca guarde una batería en el cargador. telas) o en un entorno combustible.
– Utilice el cargador bajo techo, únicamente en – Deje que el cargador se enfríe por sí solo. No lo
recintos secos, y a una temperatura ambiente de cubra.
41 °F a 104 °F (5 °C a 40 °C).
■ Los cargadores pueden producir chispas que pueden
– Mantenga el cargador fuera del alcance de los encender los gases, líquidos, vapores, polvos u otros
niños. materiales combustibles. Para reducir el riesgo de
– Siempre enchufe el cargador en un tomacorriente de incendio y explosión:
pared instalado correctamente, que tenga los – No haga funcionar en un lugar donde haya gases,
mismos voltaje y frecuencia eléctrica que se indican líquidos, vapores, polvos u otros materiales
en el cargador. combustibles.
– Nunca use zapatillas eléctricas para hacer funcionar ■ Usar un cordón eléctrico o un enchufe dañado puede
varios cargadores u otros dispositivos desde el provocar incendios, descargas eléctricas y otras lesiones
mismo tomacorriente o que formen parte del mismo personales o daños a la propiedad. Para reducir estos
circuito. riesgos:
– No opere el cargador si este ha recibido un fuerte – Revise regularmente el cordón eléctrico
golpe, o se ha caído o dañado de cualquier otro y el enchufe del cargador en busca de
modo. daños. Si están dañados, desconecte el
enchufe del tomacorriente de pared
– No intente reparar, abrir o desarmar el cargador. No
inmediatamente.
contiene en su interior piezas que el usuario pueda
reparar. – Solicite a un concesionario de servicio STIHL
autorizado que reemplace un cordón eléctrico
■ Para reducir el riesgo de descarga eléctrica o incendio
dañado.
debido a un cortocircuito:
– Asegúrese de que la batería y el cargador estén – Desenchufe el cordón eléctrico del tomacorriente
completamente secos antes de iniciar el proceso de cuando el cargador no esté en uso.
carga. – Nunca tire del cordón eléctrico para desconectarlo
– Nunca coloque un puente entre los contactos del del tomacorriente de pared. Para desenchufarlo,
cargador con cables u otros objetos metálicos. sujete el enchufe y no el cordón.
– No inserte ningún objeto en las ranuras de – No use el cordón eléctrico para ningún otro fin, por
enfriamiento del cargador. ejemplo, para transportar o sostener el cargador.
– Asegúrese de que el cordón eléctrico esté ubicado o
marcado como para que no se lo pise, cause
tropiezos, esté en contacto con objetos cortantes o
partes móviles, o de otro modo sujeto a daño o
esfuerzo.
0458-511-8621-C 19
español / EE.UU 6 MANTENIMIENTO, REPARACIÓN Y ALMACENAMIENTO
■ No debería usarse un alargador a menos que sea ■ En caso de incendio o si el cargador o la batería emana
absolutamente necesario. Sobrecargar un alargador humo, un olor inusual, está caliente al tacto o tiene un
puede provocar sobrecalentamiento e incendio. Si es aspecto anormal durante el proceso de carga:
imprescindible utilizar un alargador: – Desconecte inmediatamente el cargador del
– Solamente emplee un alargador debidamente tomacorriente y comuníquese con las autoridades
formado con alambres calibre 16 (AWG 16) o de pertinentes en caso de incendio o explosión.
mayor calibre.
■ Para reducir el riesgo de descargas eléctricas u otras
– Nunca conecte más de un cargador u otro lesiones personales o daños a la propiedad al instalar el
dispositivo a un alargador. cargador:
– Nunca use un alargador cuyo vatiaje sea inferior al – Asegúrese de que no pasen cables eléctricos,
indicado en la chapa de especificaciones del tuberías u otros conductos de servicio por detrás de
cargador. la pared donde se instalará el cargador.
– Nunca use un alargador si las clavijas del enchufe – Monte el cargador solo como se describe en este
difieren de las clavijas del enchufe del cargador en manual de instrucciones.
cuanto a la cantidad, el tamaño o la forma. – Retire la batería antes de montar el cargador.
– No una alargadores entre sí.
■ Un circuito doméstico típico suministra entre 15 y 20
amperios. Un cargador STIHL AL 500 consume 6 MANTENIMIENTO,
aproximadamente 4,8 A. Un AL 300 consume
aproximadamente 4,4 A, mientras que un AL 101
REPARACIÓN Y
consume aproximadamente 1,3 A. Para reducir el riesgo ALMACENAMIENTO
de incendios causados por la sobrecarga de un circuito
eléctrico:
6.1 Advertencias e instrucciones
– Compruebe que el circuito eléctrico tenga capacidad
suficiente para suministrar el consumo eléctrico
anticipado antes de cargar la batería.
ADVERTENCIA
■ El cargador no contiene piezas que el usuario esté
– Cargue varias baterías una por una, o en circuitos autorizado a reparar. Para reducir el riesgo de incendios,
separados, a menos que se sepa que el circuito es descargas eléctricas u otras lesiones personales y daños
capaz de soportar el consumo total anticipado de a la propiedad:
varios cargadores. – No intente reparar, abrir o desarmar el cargador. No
contiene en su interior piezas que el usuario pueda
reparar.
– Los usuarios deben efectuar únicamente los
trabajos de mantenimiento y limpieza descritos en
este manual. Los usuarios no deben realizar ningún
otro trabajo de limpieza, mantenimiento o
reparación.
20 0458-511-8621-C
7 CARGA DE LA BATERÍA español / EE.UU
0000-GXX-0636-A0
– Antes de guardarlo, siempre desenchufe el cargador 2
del tomacorriente de pared y quite la batería. 2 3
– Guarde el cargador bajo techo, en un lugar seco y
seguro al que los niños y otras personas no ► Inserte el enchufe (4) en un tomacorriente de pared
autorizadas no puedan acceder. correctamente instalado (5), que tenga el mismo voltaje y
frecuencia eléctrica indicados en la placa de capacidad
GUARDE ESTAS
nominal del cargador (1).
El cargador ejecutará una autoprueba inmediatamente
0458-511-8621-C 21
español / EE.UU 7 CARGA DE LA BATERÍA
1 2 3
0000-GXX-0637-A0
4
a
1 b
► Inserte la batería (2) en el cargador (3) hasta que haga d
tope.
El LED del cargador se ilumina en verde cuando la batería e
0000-GXX-0609-A0
se está cargando. a e
Los LED (1) de la batería se iluminan en verde e indican
el estado de la carga.
Cuando se apagan los LED de la batería, el proceso de ► Monte el cargador bajo techo, en un lugar seco cerca del
carga está finalizado y el cargador se apaga por sí solo. tomacorriente de pared.
► Retire la batería del cargador y desconecte el cordón ► Coloque los tornillos en un montante de pared. Utilice
eléctrico del tomacorriente de pared. anclajes de pared roscados adecuados u otros elementos
Una batería de fábrica nueva no está completamente de montaje similares si no hay montantes disponibles.
cargada. STIHL recomienda cargar completamente la ► Alinee el cargador de la manera ilustrada arriba. Realice
batería antes de usarla por primera vez. la instalación en una pared que tenga las siguientes
Los cargadores STIHL AL 300 y AL 500 disponen de un dimensiones:
ventilador incorporado. El ventilador puede encenderse y – a = 100 mm (3,9 pulg) como mínimo
apagarse automáticamente mientras se carga la batería. – b (para el AL 101) = 75 mm (3,0 pulg)
Utilice el cargador bajo techo, únicamente en recintos – b (para el AL 300 y el AL 500) = 120 mm (4,7 pulg)
secos, y a una temperatura ambiente de 41 °F a – c = 4,5 mm (0,2 pulg)
104 °F (5 °C a 40 °C).
22 0458-511-8621-C
8 DIAGNÓSTICO POR LED español / EE.UU
– d = 9 mm (0,4 pulg)
– e = 2,5 mm (0,1 pulg) 9 ALMACENAMIENTO
0000-GXX-0592-A0
o
La batería está averiada y es necesario
reemplazarla. Revise los LED de la batería. No
utilice una batería ni la recargue si sus LED ► Enrolle el cordón eléctrico y sujételo al cargador.
indican que ha habido una avería.
► Guarde el cargador bajo techo, en un lugar seco y bajo
o llave.
El cargador está averiado. Solicite a un ► Mantenga el cargador fuera del alcance de los niños y de
concesionario de servicio STIHL autorizado que otras personas no autorizadas.
lo revise antes de usarlo.
Para obtener más información, @ 11.
0458-511-8621-C 23
español / EE.UU 10 INSPECCIÓN Y MANTENIMIENTO
10INSPECCIÓN Y
MANTENIMIENTO
10.1 Inspección y mantenimiento del cargador
ADVERTENCIA
Para reducir el riesgo de sufrir lesiones personales
causadas por cortocircuitos o incendios, no intente reparar,
abrir o desarmar el cargador. No contiene en su interior
piezas que el usuario pueda reparar. Siempre desenchufe el
cargador antes de limpiarlo.
24 0458-511-8621-C
11 GUÍA DE SOLUCIÓN DE PROBLEMAS español / EE.UU
0458-511-8621-C 25
español / EE.UU 12 ESPECIFICACIONES
Símbolo Explicación
12ESPECIFICACIONES AC Corriente alterna
IP20 Grado de protección eléctrica
12.1 STIHL AL 101, AL 300, AL 500 X El cordón eléctrico debe ser reemplazado por
un repuesto STIHL de tipo idéntico.
– Voltaje de alimentación: Ver chapa de identificación
Corriente continua
– Corriente nominal: Ver chapa de identificación
– Frecuencia: Ver chapa de identificación Fusible
26 0458-511-8621-C
12 ESPECIFICACIONES español / EE.UU
0458-511-8621-C 27
español / EE.UU 13 PIEZAS Y EQUIPOS DE REPUESTO
28 0458-511-8621-C
17 DIRECCIONES español / EE.UU
STIHL
Injection TM
17DIRECCIONES
17.1 STIHL Incorporated
STIHL Incorporated
536 Viking Drive
P.O. Box 2015
Virginia Beach, VA
23452-2015
0458-511-8621-C 29
WARNING ADVERTENCIA
This charger contains chemicals known to Este cargador contiene productos químicos
the State of California to cause cancer, birth considerados por el Estado de California
defects or other reproductive harm. como causantes de cáncer, defectos de
nacimiento u otra toxicidad reproductora.
0458-511-8621-C
englisch / spanisch USA
U
www.stihl.com
*04585118621C*
0458-511-8621-C