The document provides details on the design of slabs for different beam dimensions and reinforcement configurations. It lists the beam width and depth, slab thickness, main and additional reinforcement bar sizes and numbers, and calculates the total steel area, steel ratio, moment capacity, and required moment to resist for positive and negative bending. Reinforcement is designed for two different concrete compressive strengths of 250 kg/cm2 and 350 kg/cm2. Bar sizes of 10-16 mm are used for main reinforcement and 0-25 mm for additional bars depending on the beam-slab configuration and required capacity.
The document provides details on the design of slabs for different beam dimensions and reinforcement configurations. It lists the beam width and depth, slab thickness, main and additional reinforcement bar sizes and numbers, and calculates the total steel area, steel ratio, moment capacity, and required moment to resist for positive and negative bending. Reinforcement is designed for two different concrete compressive strengths of 250 kg/cm2 and 350 kg/cm2. Bar sizes of 10-16 mm are used for main reinforcement and 0-25 mm for additional bars depending on the beam-slab configuration and required capacity.
The document provides details on the design of slabs for different beam dimensions and reinforcement configurations. It lists the beam width and depth, slab thickness, main and additional reinforcement bar sizes and numbers, and calculates the total steel area, steel ratio, moment capacity, and required moment to resist for positive and negative bending. Reinforcement is designed for two different concrete compressive strengths of 250 kg/cm2 and 350 kg/cm2. Bar sizes of 10-16 mm are used for main reinforcement and 0-25 mm for additional bars depending on the beam-slab configuration and required capacity.