Professional Documents
Culture Documents
CREDIT REQUIREMENTS
All orders are subject to approval by our Credit Department. If you are a new account, complete a current credit
application form that we will provide. A credit limit will be imposed on new accounts until credit has been
established.
PAYMENT TERMS Terms are net 30 days. Catalog prices are subject to change without notice.
ORDER CANCELLATION In the event an order is cancelled, an additional charge will be assessed to cover the cost of labor and material.
RETURNED MATERIAL A 25% handling/restocking fee will be applied to all standard products returned for credit. A return authorization
number and shipping instructions must be obtained in advance before an item can be returned. No returns are
accepted after 3 months.
CLAIMS All claims or product shortages must be made within 30 days of the invoice date.
Ordering Information
1. Machine Type and Model
2. Type of PART #
3. “W” dimension “P” dimension “A” dimension etc.
4. DIE CLEARANCE or material thickness and type.
5. Are the DIMENSIONS looking at the face of the PUNCH or DIE.
6. KEYING STYLE and Direction (if required).
OSHA WARNING
It is the user's responsibility that the machine and tooling be set up and used in accordance
with local and national OSHA laws and ANSI B11.5 standards for safety.
Shapes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Keying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Spot Drills. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Whistle Notch Locator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Stock - Round Punches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Non-Stock Round Punches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Stock - Round Dies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Non-Stock Round Dies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Stock - Square Punches & Dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Stock - Oblong Punches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Stock - Oblong Dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13
Offset Dies - Style 128 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Specialty Dies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
BATEMAN™/LEHMAN™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
BUFFALO™ Punches and Dies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
EDWARD™ Tooling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ENERPAC™/POWER TEAM™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
GEKA™ Punches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
GEKA™ Dies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
HOUGEN™/OGURA™ Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
KINGSLAND™ Tooling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
MUBEA™ Punches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
MUBEA™ Dies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
MUBEA™ Wedge Lock Punches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
NITTO KOHKI™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
PEDDINGHAUS™ Punches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
PEDDINGHAUS™ Dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
PEDDINGHAUS™ Ironworker Tooling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
PIRANHA™ Punches and Dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
SCOTCHMAN™/UNI-HYDRO™ Punches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
SCOTCHMAN™/UNI-HYDRO™ Dies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Taper Shank Punches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
End Trim Cutoff Tooling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Stepped Point Punch Tooling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Single Corner Radius Tooling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Punch Stems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Punch Reducing Sleeves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Coupling Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Punch Ends/Die Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Clearance/Tonnages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
P A P A P A P P P
W W W W W W
SS-7 R
SS-8 SS-9 SS-10 SS-11 R1
SS-12
R A
R2
P P P R P P P
A
R2
W W W W W W
P P P P P P
R
W W W W
W W
P P P P
W
W W W W W B
P P P P P P
W W W W W W
R
R1 R P P B P
P P P
W B
A
W A W
W W
SPOT DRILLS
DIRECTION “A” DIRECTION “B” DIRECTION “AB”
1/8
1/8 10°
10°
1/8
10°
1/8
1/8
1/8
ALL STANDARD SHAPED PUNCHES AND DIES ARE STOCKED WITHOUT KEYING OR LOCATORS.
KEYING OR LOCATORS CAN BE SUPPLIED ON REQUEST.
PART #I4 PART # I6 PART # I7 PART # I9 PART # I10 PART # I11 PART # I12
1/8 - 9/16 1/8 - 9/16 1/8 - 13/16 1/8 - 13/16 3/16 - 13/16 3/16 - 3/4 1/8 - 1-1/16
9/16 1-1/2 9/16 2-1/8 25/32 1-1/2 13/16 1-1/2 13/16 1-7/8 3/4 1-1/32
2-1/8 1-15/16
P P P
P P
P P
PART # I12L PART # I15 PART # I16 PART # I17 PART # I19 PART # I19L
1/4 - 1-1/16 7/32 - 1-1/16 1/8 - 1-1/8 3/16 - 1-1/8 3/16 - 1-1/8 5/16 - 1-1/16
P
P P
P
P
P
PART # I20 PART # I21 PART # I23 PART # I23L PART # I26
1/8 - 1-1/4 3/16 - 1-1/4 1/4 - 1-5/16 1/4 - 1-5/16 5/32 - 1-9/16
P P
P
P P
P P
P P
2-13/16 2 2 1/2
3-3/8 3 3
P P
P
Radius
S.B.R.
PART # I41* PART # I42 PART # I43,5* PART# I43 PART #I45
5/32 - 3/4 5/32 - 25/32 5/32 - 15/16 5/32 - 15/16 5/32 - 1-1/8
P P P
P P
1-1/4 1-1/8
1 1
P P P
P
2 2-3/16 2-3/8 60 MM
1-1/4 1-1/8
2-1/2 2-7/8
P P
1-1/4 1-1/4
2-7/8 2-15/16
* MADE TO ORDER
P P P
3 3-35/64 3-7/8
P
P
1-1/4 1-3/8
4 5-1/8
P
P
1-5/8 1-1/2
6 6-3/8
P
Point
Size Land
Slug
Hole
1-5/8
Height
8
Outside Diameter
* MADE TO ORDER
SIZE IS12 IS16 IS20 IS26 SIZE IS55 IS58 IS59 IS62
1/4 9/32
9/32 5/16
5/16 11/32
11/32 ✓ ✓ 3/8 ✓
3/8 13/32 ✓
13/32 ✓ 7/16
7/16 15/32
15/32 ✓ 1/2 ✓ ✓
1/2 ✓ 17/32 ✓
17/32 ✓ 9/16
9/16 ✓ ✓ 19/32 ✓
19/32 ✓ ✓ 5/8 ✓
5/8 21/32
21/32 ✓ 11/16
11/16 23/32
23/32 3/4 ✓ ✓
3/4 25/32
25/32 ✓ 13/16
13/16 27/32 ✓ ✓
7/8 7/8
15/16 29/32 ✓
1 15/16
1-1/16 31/32
1 ✓ ✓
1-1/32
1-1/16 ✓
✓ Represents stock square size 1-3/32
1-1/8
See page 5 if keying required on punch or die.
SIZE IO12 IO16 IO20 IO26 SIZE IO12 IO16 IO20 IO26 SIZE IO12 IO16 IO20 IO26
3/16 x 3/4 ✓ 7/16 x 9/16 ✓ ✓ 11/16 x 1-1/8
13/32 x 1 11/16 x 1
SIZE IO55 IO58 IO59 IO62 SIZE IO55 IO58 IO59 IO62
7/32 x 25/32 ✓ 15/32 x 1-1/32 ✓
7/32 x 1-1/32 15/32 x 1-3/32 ✓
1/4 x 15/32 15/32 x 1-9/32 ✓
1/4 x 1-1/32 15/32 x 1-17/32
9/32 x 17/32 1/2 x 25/32
9/32 x 25/32 1/2 x 1-1/32
9/32 x 1-1/32 1/2 x 1-1/16
5/16 x 17/32 1/2 x 1-5/16
5/16 x 19/32 1/2 x 1-9/32
5/16 x 25/32 ✓ 17/32 x 25/32
5/16 x 1-1/32 17/32 x 1-1/32
11/32 x 17/32 ✓ 17/32 x 1-3/32 ✓
11/32 x 21/32 17/32 x 1-9/32
11/32 x 25/32 17/32 x 1-17/32
11/32 x 1-1/32 ✓ 9/16 x 25/32
11/32 x 1-3/32 9/16 x 13/16 ✓
11/32 x 1-9/32 9/16 x 1-1/32 ✓
11/32 x 1-17/32 9/16 x 1-1/16
3/8 x 23/32 ✓ 9/16 x 1-3/32 ✓
3/8 x 25/32 9/16 x 1-1/8
3/8 x 1-1/32 ✓ 9/16 x 1-3/16
3/8 x 1-3/32 9/16 x 1-9/32 ✓ ✓
3/8 x 1-9/32 9/16 x 1-5/16
3/8 x 1-5/16 9/16 x 1-17/32 ✓
13/32 x 17/32 9/16 x 1-9/16
13/32 x 25/32 ✓ 19/32 x 25/32
13/32 x 1-1/32 ✓ ✓ 19/32 x 1-1/32 ✓
13/32 x 1-9/32 ✓ 19/32 x 1-1/16 ✓
13/32 x 1-17/32 19/32 x 1-3/32
7/16 x 25/32 19/32 x 1-5/32
7/16 x 27/32 ✓ 19/32 x 1-9/32
7/16 x 1-1/32 ✓ 19/32 x 1-5/16
7/16 x 1-9/32 ✓ 19/32 x 1-17/32
7/16 x 1-5/16 19/32 x 1-9/16
15/32 x 19/32 5/8 x 13/16
15/32 x 25/32 5/8 x 1-1/16
15/32 x 29/32
See page 5 if keying required
✓ Represents stock oblong size
on punch or die.
SIZE IO55 IO58 IO59 IO62 SIZE IO55 IO58 IO59 IO62
5/8 x 1-1/8 ✓ 7/8 x 1-1/8
5/8 x 1-3/16 7/8 x 1-3/16
5/8 x 1-5/16 7/8 x 1-5/16
5/8 x 1-9/16 7/8 x 1-9/16
21/32 x 1-1/32 29/32 x 1-9/32
21/32 x 1-9/32 ✓ 29/32 x 1-17/32
21/32 x 1-17/32 15/16 x 1-5/16 ✓
11/16 x 1-1/32 15/16 x 1-9/16 ✓
11/16 x 1-1/16 31/32 x 1-3/32
11/16 x 1-9/32 31/32 x 1-5/32
11/16 x 1-5/16 ✓ 31/32 x 1-9/32 ✓
11/16 x 1-9/16 31/32 x 1-17/32 ✓
23/32 x 1-1/32 1 x 1-1/8
23/32 x 1-3/32 ✓ 1 x 1-3/16
23/32 x 1-5/32 1 x 1-5/16 ✓
23/32 x 1-9/32 ✓ 1 x 1-9/16 ✓
23/32 x 1-17/32 1 x 1-5/8
3/4 x 1-1/32 1-1/32 x 1-9/32 ✓ ✓
3/4 x 1-1/16 1-1/32 x 1-17/32
3/4 x 1-1/8 ✓ 1-1/32 x 1-19/32
3/4 x 1-3/16 1-1/16 x 1-5/16 ✓
3/4 x 1-9/32 1-1/16 x 1-9/16
3/4 x 1-5/16 1-1/16 x 1-5/8 ✓
3/4 x 1-9/16 ✓ 1-3/32 x 1-9/32
25/32 x 1-1/32 1-3/32 x 1-11/32
25/32 x 1-9/32 1-3/32 x 1-17/32 ✓
25/32 x 1-17/32 1-1/8 x 1-5/16
13/16 x 1-1/32 1-1/8 x 1-3/8
13/16 x 1-1/16 ✓ 1-1/8 x 1-9/16
13/16 x 1-9/32 1-1/8 x 1-5/8
13/16 x 1-5/16 1-5/32 x 1-17/32
13/16 x 1-9/16 1-3/16 x 1-9/16
27/32 x 1-1/32
27/32 x 1-3/32
27/32 x 1-5/32
27/32 x 1-9/32
27/32 x 1-17/32
See page 5 if keying required
7/8 x 1-1/16 ✓ Represents stock oblong size
on punch or die.
270° 90°
HEXAGON
0°
STOCK ROUND OFFSET DIES
Style 128 POSITION A POSITION B
✓ Represents stock round sizes
PART NUMBER
SIZE I55128 I59128 I62128
SQUARE
5/32
3/16
7/32 ✓
1/4
9/32 ✓ POSITION A POSITION B
5/16
11/32 ✓
3/8 OBLONG
13/32
7/16 ✓
15/32 ✓
1/2
17/32 ✓ ✓
9/16 POSITION A POSITION B
19/32 ✓ ✓ CLEVELAND PUNCH™ CLEVELAND PUNCH™
POSITION B POSITION A
5/8
21/32 ✓ ✓
11/16 ✓
23/32 ✓ ✓
3/4
25/32
13/16
27/32 ✓ 1/4˝ Minimum
7/8 ✓ Wall Thickness
29/32 1/4˝ Minimum
Wall Thickness
15/16 ✓
31/32 ✓
1 The Style 128 Offset dies are manufactured with a minimum
1-1/32 wall thickness (front hole wall to die outside diameter) of 1/4˝.
Stock round Style 128 offset dies are supplied without locators.
1-1/16
Locators can be furnish on request.
1-3/32
1-1/8
Specialty Ironworker Dies are made to order. Style 129 and Style
241 offset dies, are manufactured with a minimum wall thickness (front
hole wall to die outside diameter) of 1/4˝.
Bevel Smooth Dies are dies designed Style 127 Style 129
especially for use in punching structural Bevel P Bevel P
shapes such as “I” beams, channels and angle Smooth Smooth
iron. Bevel smooth dies are recommended Concentric Offset
High High
where the material punched is angled or does Side Height Side Height
not have a uniform thickness.
O.D. O.D.
90°
5/8
5/8
9/16
9/16
2
2
1
1
1-1/2
1-1/2
5/8
5/8
9/16
9/16
2
2
1
1
1-1/2
1-1/2
P
P P
PART # I85350(0) PART # I14020 (1/2) PART # I665 (1-1/2) PART # I904 (2-1/2)
5/32 - 1-5/32 5/32 - 1-7/32 5/32 - 1-9/32 5/32 - 1-9/16
5/8
7/8
7/8 15/16
P P
P
P
* MADE TO ORDER
Also available as: oblongs, rectangles, and squares - both punch and die.
1-1/16
1-1/16 1-17/32 1-17/32
2-1/8 1-17/32 1-17/32
2-1/8 2-11/16 2-11/16
2-11/16 2-11/16
P
P
P P
P P
8 1-1/8 1-1/4
Range in 1/32 Increments
1-1/4
8 1-1/8 1-1/4 1-1/4
* MADE TO ORDER
1-13/16 2-3/8 2-3/8
1-13/16 2-3/8 2-3/8
Also available as: oblongs, rectangles, and squares.
.629 1
1.585 1-1/2
7/8
.750
1.338 1-1/4
25/32
1-1/2 1-1/16 1-7/32 1-17/32
2-1/8 2-3/8 2-11/16
P
P
P
P P P
4-1/8 12 MM 20 MM
3-15/16
50 MM
2-1/4 64 MM
P
P
* MADE TO ORDER
1-1/8 1
7/8
1-1/4 1-13/16 2
2-3/8 60 MM 2-7/8
1-1/8 1-1/8
78 MM 100 MM
PART # I125MM*
(OVERSIZE) P
3 - 4-3/16
1-1/8
125 MM
PART # I200MM*
(OVERSIZE)
4 - 6-7/16 P
1-23/32
200 MM
Range in 1/32 Increments See page 5 if keying required. Also available as: oblongs, rectangles, and squares.
* MADE TO ORDER
P
P
P
3-11/32 4-11/32
2-3/4 2-3/4
P P
P P
P
1-1/4 1-1/4
1
2 2-3/8 3-11/16
P P
1-1/4 1-1/4
115MM 140MM
Range in 1/32 Increments See page 5 if keying required. Also available as: oblongs, rectangles, and squares.
* MADE TO ORDER
1-1/4 1-3/8
P
P
1-9/16 2
2-3/8 2-3/8
4-9/16
P P
V-Groove
IH1P, IH2P, IH3P and IH4P shaped
punches require a "V" groove. Must be
specified at time of order.
Punch Stem
Punch
STANDARD UNLESS
OTHERWISE SPECIFIED
5 mm
Ø
PIN DIRECTION B
Range in 1/32 Increments Also available as: oblongs, rectangles, and squares.
* MADE TO ORDER
P P P
1-1/8 1 1-1/4
1-13/16 2 2-1/2
1-5/8 1-9/16
150MM (STYLE I)
3-1/8 OR
200MM (STYLE II)
* MADE TO ORDER
7/32
1/4 ✓
9/32 24mm
5/16 L
11/32
3/8
13/32
7/16
15/32
1/2
17/32 A
9/16
19/32 17mm
5/8 ✓
21/32
42mm
11/16
23/32
PART #INK48P* PART # INK48D*
3/4
MINI-PUNCH DIE
25/32
13/16 ✓ 10mm
27/32 ✓
7/8
29/32 24mm
15/16
31/32
NITTO KOHKI™
PUNCHES & DIES 18mm
FOR MODELS
A-05-1018 & S06-0318
28mm
1/2
11/16 1 1-1/4
1-7/32 1-3/4
2-7/16
P
3-1/8
P
1-1/4
1-1/2 1-3/4
15°
P P P
3-7/16 31mm
3-1/8 27mm
70mm
3-3/8
P P
P
P
P 1 P 1
15/32 P 5/8 P
P
P13/16 P P P P P
1-1/4 2-1/8 1 2-1/8 1
P P 5/8
P 15/32
1-1/4 1-1/4
1 1 1 1 1
5/32 13/16 15/32 5/8 1-1/4 5/8 2-1/8 2-1/8
PART # I62N (I281F)
13/16 1-1/4 PART # I62NB (I281FB) PART # I65N (I291F)
2-3/8 1-1/4 2-1/8 2-3/8 2-1/8 2-1/8 2-1/8 2-1/2
WITH WHISTLE NOTCH
P P
7/32 - 1-11/16
P
P 1-1/4 P 1-1/4 P 1
P P P P P
P
2-3/8 1-1/4 2-3/8 1-1/4 P P
2-1/2 1-1/4
P P 2-3/4 P P P
1-1/4 4 1-1/4
1
1-1/4 1-1/4 1-1/4 1-1/4
2-3/4 4
2
2-3/4 2-3/4 P 4 4 15/16
1
Slug Hole VariationsP P
The standard slug hole is used
2
for common applications. However, the tapered
and straight slug holes may be specified
1 for special or heavy duty applications 15/16 1
P P
requiring extra strength.
1 2 1 2-1/8
P
15/16
2 2 1
15/16 15/16
P
Standard Straight Thru Hole Tapered
(STH) 2-1/8
P P 1
Range in 1/32 Increments Also available as: oblongs, rectangles, and squares.
1 2-1/8 1
* MADE TO ORDER
2-1/8 2-1/8
1-1/32
1-1/16 1-7/32
1-15/16 1-17/32
2-1/8 2-3/8 2-11/16
P
P
P
P
2-1/2
P P
2-9/32
1-1/8
3 1
1-13/16 2
P P P
* MADE TO ORDER Also available as oblongs, rectangles and squares. See page 5 if keying required.
1-1/4 1-11/16
I6670-1
1-1/16
1-17/32
2-1/8 Threaded Style
2-11/16
1
P
2-9/32 - 2-21/32
P
Bolt On Style
1
P
P
1-13/16 2-3/8
P
Range in 1/32 Increments
Minimum diameter or width of shape is 1.97
See page 5 if keying required.
Scotchman™
Groove
1 1 1
Uni-Hyrdo™ 1 1 1 1 1 1
Groove
3-5/16 3-5/16 3-5/16 3-5/16
3-5/16
3-5/16 3-5/16
3-5/16 3-5/16
3-5/16 3-5/16
3-5/16
P P P P
P P P P P P P P
PART #SR429
Snap Ring
PART # I20 PART # I26 PART # Scotchman™ I207-2* PART # Scotchman™ I207K-2*
1/8 - 1-1/4 5/32 - 1-9/16 1-19/32 - 2.000 2.00 - 4.00
1-3/8
1-3/8
1-3/8 1-11/16
1-11/16
1-7/32
1-7/32
1-7/32 1-17/32
1-17/32
1-17/32 2 2 2
2-3/82-3/8
2-3/8 2-11/16
2-11/16
2-11/16 3-1/2
3-1/2
3-1/2
3-1/23-1/23-1/2
P P
P
P P
P
P P
P
P P
P P
P P
1-1/4 1-1/4
7/8 7/8 1 1
2 2 2 2 2-1/2 2-1/2
P P P P
P P
Scotchman™ 6 x 6* Scotchman™ 4 x 6*
2-1/32 - 4 2-1/32 - 2-1/4
6-1/2 6-1/2 P P
5-1/2 5-1/2
4 1
6-1/2 6-1/2 4 1
PART # I77-50
POINT DIAMETER - 11/32
PART # I77-60
POINT DIAMETER - 13/32
11/16
PART # I77-70
POINT DIAMETER - 15/32
1-1/2
PART # I77-80
POINT DIAMETER - 17/32
PART # I77-90
POINT DIAMETER - 17/32
1-1/2
PART # I77-110
POINT DIAMETER - 21/32
Radius
Maximum
3/8 Material
Thickness
Corner Radius
Corner radius tooling cuts a corner radius on material thickness up to 1/4".
The die has a built in material guide to locate material. When ordering, please
specify part number, radius required, material thickness and type.
Radius
Radius
J
E
D D A A H G A
A
L
L
L L
Threads
C
per 1˝
Threads
Threads
C
Threads
per 1˝
per 1˝
C
per 1˝
B
B
B B
I
D
F
H F
F
E E
A D A
I° G
L
D
Threads
C D E F L L
per 1˝
L
B
C
Threads
Threads
C
per 1˝
per 1˝
Threads
C
per 1˝
B B
W
F B
H K H
D I
E A
A
H
Depth
To help eliminate rotational movement of punches we
recommend putting keyways in the face of the punch
stem. Specify the width and the depth when ordering.
Width
1 25/32 1
1-1/8 1 25/32 1
1-1/8
2-1/16 1-1/16
9/16 2-1/16 3/4 1-1/16
1-9/16 9/16 2-9/16 3/4 1-17/32
1-9/16 1-1/16 2-9/16 1-1/16 1-17/32
2-9/16 1-1/16 1-1/16
2-9/16
A
A
Die Reducers*
Die reducers allow you to use smaller O.D. dies. The following table
gives examples of die reducers. Made to order sizes are available.
When ordering please specify dimensions indicated in the diagram.
O.D. I.D. BH
BH
O.D. I.D.
PUNCH SHIM DIE SHIM
* MADE TO ORDER
C
CLOSE CENTRE COUPLING NUTS
USE
COUPLING A B WITH
HEXAGON THREADS C L
NUT LARGEST THREAD PUNCH
SIZE PER INCH BORE LENGTH
NUMBER O.D DIAMETER FIGURE
NUMBER Hexagon
A Size
CCN-4 1-1/4 10 1-7/16 1-1/8 .570 1-5/16 I4, I6
CCN-16 1-5/8 10 1-15/16 1-3/8 1.070 1-5/8 I15, I16,
I17, I19,
CCN16-1 1-7/8 10 2-13/16 1-5/8 1.070 1-5/8 I19L
CCN-23 2-3/16 10 2-7/16 1-5/8 1.320 1-5/8 I23
PUNCH END CONFIGURATIONS
EXAMPLES ONLY
MILD STEEL PLATE
UP TO 16 GA. .006 CLEARANCE