Professional Documents
Culture Documents
Cemento Clase H PDF
Cemento Clase H PDF
Class H-HSR Ce m e nt
The Holcim Apasco´s Class H-HSR Pórtland Cement is a very High Sulfate
Re s i s t a n ce pro d u ct, Low Alka l i - Aggregate Re a ctivity and ve ry Low
Hydratation Heat specially designed to be used in Geotermic & Petroleum
production works.
Class H-HSR Ce m e nt
Applications Recommendations of uses
The high variations present in the Oil Cements due the - Exclusive use in the Oil & Geotermic industry.
a d m i x t u re s, observed between batches pro d u ced of - Due to its special characteristics and use, this cement is
Class API Cements, as well as the severe conditions of too sensible to contamination.
some oil wells in México, are factors that force to make - Due to the delicate applications, its storage must be
grout designs, sophisticated, difficult to control, expen- carefull and not for long term to avoid modifications in
sive due to the high percentage of admixtures taking some of its characteristics that affect its reologic per-
part requiring too much time in the design, affecting the formance.
waiting time in the oil wells. This lead us to the Class H-
HSR Cement that thanks to its physic-chemical proper- Specifications
ties, this product is the recommended to cement oil wells
where the temperature conditions raise up to 165°C and PARÁMETER NRF - 069 API HOLCIM
pressure of 36,000 psi at 9,000 m depth. Also, it is the ( % WEIGH ) - PEMEX Esp 10 (MAX.) APASCO
CHEMICALS (MAX) (MAX.)
ideal cement to make grouts used to cement oil & geo-
Mg O 2.0 6.0 2.0
termic wells, wich are exposed to the action of aggre-
ssive agents – like sulfates, chlorides, aggressive forma- SO3 3.0 3.0 3.0
tions and high temperature & pressure conditions. LOI 1.50 3.0 1.5
the quality standards set up by the American Petroleum NRF - 069 API HOLCIM
PHYSICS - PEMEX Espc 10A APASCO
Institute (API-Esp-10) and the standard NRF-069-PEMEX.
The cement plant pro d u cer of the Class H-HSR Ce m e nt H2O free 5-9 5.9 5.9
comply with the API Certification as well as the ISO 9000. Blaine 2700+/-50 Not spec. 2700+/-50
Notes: The data and directions contained in this are based on our Staff´s experience and on
test performed in our Concrete Technical Center and in accordance with current standards.
Concrete construction practices and conditions under wich concrete or mortar is applied to
Technical Serv i ce: the work are outside the scope of Holcim Apasco.
Co r p o rate Offices: (55) 5724 0000
Co n c rete Te c h n o l o gyCe nt re: 01800 714 22 72 To obtain the best results, please follow the recommendations and contact your Commercial
www.holcimapasco.com.mx Executive for additional assistance.