This document provides specifications for Shell MFO 380 residual marine fuel oil, including limits for properties like density, kinematic viscosity, flash point, pour point, carbon residue, ash, water, and sulfur content. It lists test methods for measuring each property and the maximum or minimum limits allowed to meet specifications. The specifications are intended to ensure the fuel oil has properties suitable for use in ship engines.
This document provides specifications for Shell MFO 380 residual marine fuel oil, including limits for properties like density, kinematic viscosity, flash point, pour point, carbon residue, ash, water, and sulfur content. It lists test methods for measuring each property and the maximum or minimum limits allowed to meet specifications. The specifications are intended to ensure the fuel oil has properties suitable for use in ship engines.
This document provides specifications for Shell MFO 380 residual marine fuel oil, including limits for properties like density, kinematic viscosity, flash point, pour point, carbon residue, ash, water, and sulfur content. It lists test methods for measuring each property and the maximum or minimum limits allowed to meet specifications. The specifications are intended to ensure the fuel oil has properties suitable for use in ship engines.
Density at 15°C Max. kg/m3 ISO 3675 or ISO 12185 991
Kinematic Viscosity at 50°C Max. mm2/s (cSt) ISO 3104 380 Flash Point (PMCC) Min. °C ISO 2719(B) 60 Pour Point Max. °C ISO 3016 30 Carbon Residue (Microcarbon) Max. % (m/m) ISO 10370 22 Ash Max. % (m/m) ISO 6245 0.15 Water Max. % (v/v) ISO 3733 0.5 Sulphur* Max. % (m/m) ISO 8754 4.5 1.5 Vanadium Max. mg/kg ISO 14597 600 Strong Acid Number Max. mg KOH/g ISO 6618 Nil Cleanliness & Stability (Total Sediment) – After treatment (Potential) Max. % mass ISO 10307-2 0.10 Aluminium plus Silicon Max. mg/kg ISO 10478 80 Zinc Max. mg/kg IP 501 15 Phosphorus Max. mg/kg IP 501 15 Calcium Max. mg/kg IP 501 30
Acid Number Max. mg KOH/g ISO 6619 3.0
Cleanliness & Stability (Total Sediment) – Before treatment (Existent) Max. % mass ISO 10307-1 0.10 Differential, Total Sediment (Potential minus Existent) Max. % mass Calc 0.05