Professional Documents
Culture Documents
Question
Can the PanelView Plus 6 700 - 1500 be downgraded to older firmware?
Answer
Yes, all PanelView Plus 6 terminals can be upgraded and downgraded.
The oldest version available on the Product Compatibility & Download Center
(https://compatibility.rockwellautomation.com/Pages/MultiProductSelector.aspx?crumb=111) is 7.00.
If you are going to downgrade a panel with version 10.00 or later, review the technote 1083466 - PanelView
Plus 6 terminals boot to the Windows CE desktop after a firmware downgrade
(//rockwellautomation.custhelp.com/app/answers/detail/a_id/1083466).
PanelView Plus 6 400 / 600 with 7.0 firmware cannot be downgraded to 6.xx. The same would be true for
Panelview Plus 6 Compact terminals.
PanelView Plus 6 with firmware 6.00 or later cannot be downgraded to versions 5.10 and older, because
hardware differences.
DISCLAIMER
This knowledge base web site is intended to provide general technical information on a particular subject or
subjects and is not an exhaustive treatment of such subjects. Accordingly, the information in this web site is not
intended to constitute application, design, software or other professional engineering advice or services.
Before making any decision or taking any action, which might affect your equipment, you should consult a
qualified professional advisor.
https://rockwellautomation.custhelp.com/app/answers/detail/a_id/621979/page/1 1/2
6/15/2019 621979 - Downgrading firmware on PanelView Plus 6 terminals
INFRINGEMENT. Note that certain jurisdictions do not countenance the exclusion of implied warranties; thus,
this disclaimer may not apply to you.
https://rockwellautomation.custhelp.com/app/answers/detail/a_id/621979/page/1 2/2